system strap implementation + boot sequence change
diff --git a/README.md b/README.md
index 995e370..ae4ea1c 100644
--- a/README.md
+++ b/README.md
@@ -87,6 +87,9 @@
<tr>
<td align="center"><img src="./docs/source/_static/Riscduino-derivatives.png" ></td>
</tr>
+ <tr>
+ <td align="center"><img src="./docs/source/_static/Riscduino_Series_placement.png" ></td>
+ </tr>
</table>
@@ -128,7 +131,7 @@
<tr>
<td align="center"> MPW-5 </td>
<td align="center"> 21-Mar-2022 </td>
- <td align="center"> Riscduino-SCORE</td>
+ <td align="center"> Riscduino-SCORE (S0)</td>
<td align="center"> Single 32bit RISCV core with cache + Onchip SRAM+ WB Cross Bar</td>
<td align="center"> <a href="https://github.com/dineshannayya/riscduino">Link</a></td>
<td align="center"> <a href="https://platform.efabless.com/projects/670">Link</a></td>
@@ -136,7 +139,7 @@
<tr>
<td align="center"> MPW-5 </td>
<td align="center"> 21-Mar-2022 </td>
- <td align="center"> Riscduino-DCORE</td>
+ <td align="center"> Riscduino-DCORE (D0)</td>
<td align="center"> Dual 32bit RISCV core with cache + Onchip SRAM+ WB Cross Bar</td>
<td align="center"> <a href="https://github.com/dineshannayya/riscduino_dcore">Link</a></td>
<td align="center"> <a href="https://platform.efabless.com/projects/718">Link</a></td>
@@ -144,11 +147,35 @@
<tr>
<td align="center"> MPW-5 </td>
<td align="center"> 21-Mar-2022 </td>
- <td align="center"> Riscduino-QCORE</td>
+ <td align="center"> Riscduino-QCORE (Q0)</td>
<td align="center"> Quad 32bit RISCV core with cache + Onchip SRAM+ WB Cross Bar</td>
<td align="center"> <a href="https://github.com/dineshannayya/riscduino_qcore">Link</a></td>
<td align="center"> <a href="https://platform.efabless.com/projects/782">Link</a></td>
</tr>
+ <tr>
+ <td align="center"> MPW-6 </td>
+ <td align="center"> 07-June-2022 </td>
+ <td align="center"> Riscduino-SCORE (S3)</td>
+ <td align="center"> Single 32bit RISCV core with cache + Onchip SRAM+ WB Cross Bar</td>
+ <td align="center"> <a href="https://github.com/dineshannayya/riscduino">Link</a></td>
+ <td align="center"> <a href="https://platform.efabless.com/projects/1047">Link</a></td>
+ </tr>
+ <tr>
+ <td align="center"> MPW-6 </td>
+ <td align="center"> 07-June-2022 </td>
+ <td align="center"> Riscduino-DCORE (D1)</td>
+ <td align="center"> Dual 32bit RISCV core with cache + Onchip SRAM+ WB Cross Bar</td>
+ <td align="center"> <a href="https://github.com/dineshannayya/riscduino_dcore">Link</a></td>
+ <td align="center"> <a href="https://platform.efabless.com/projects/838">Link</a></td>
+ </tr>
+ <tr>
+ <td align="center"> MPW-6 </td>
+ <td align="center"> 07-June-2022 </td>
+ <td align="center"> Riscduino-QCORE (Q1)</td>
+ <td align="center"> Quad 32bit RISCV core with cache + Onchip SRAM+ WB Cross Bar</td>
+ <td align="center"> <a href="https://github.com/dineshannayya/riscduino_qcore">Link</a></td>
+ <td align="center"> <a href="https://platform.efabless.com/projects/839">Link</a></td>
+ </tr>
</table>
# SOC Pin Mapping
@@ -162,49 +189,50 @@
<table>
<tr align="center"> <td> ATMGA328 Pin No</td> <td> Functionality </td> <td> Arudino Pin Name</td> <td> Carvel Pin Mapping </td></tr>
- <tr align="center"> <td> Pin-1 </td> <td> PC6/RESET </td> <td> </td> <td> digital_io[0] </td></tr>
- <tr align="center"> <td> Pin-2 </td> <td> PD0/RXD[0] </td> <td> D0 </td> <td> digital_io[1] </td></tr>
- <tr align="center"> <td> Pin-3 </td> <td> PD1/TXD[0] </td> <td> D1 </td> <td> digital_io[2] </td></tr>
- <tr align="center"> <td> Pin-4 </td> <td> PD2/RXD[1]/INT0 </td> <td> D2 </td> <td> digital_io[3] </td></tr>
- <tr align="center"> <td> Pin-5 </td> <td> PD3/INT1/OC2B(PWM0) </td> <td> D3 </td> <td> digital_io[4] </td></tr>
- <tr align="center"> <td> Pin-6 </td> <td> PD4/TXD[1] </td> <td> D4 </td> <td> digital_io[5] </td></tr>
+ <tr align="center"> <td> Pin-1 </td> <td> PC6/RESET </td> <td> </td> <td> digital_io[5] </td></tr>
+ <tr align="center"> <td> Pin-2 </td> <td> PD0/RXD[0] </td> <td> D0 </td> <td> digital_io[6] </td></tr>
+ <tr align="center"> <td> Pin-3 </td> <td> PD1/TXD[0] </td> <td> D1 </td> <td> digital_io[7] </td></tr>
+ <tr align="center"> <td> Pin-4 </td> <td> PD2/RXD[1]/INT0 </td> <td> D2 </td> <td> digital_io[8] </td></tr>
+ <tr align="center"> <td> Pin-5 </td> <td> PD3/INT1/OC2B(PWM0) </td> <td> D3 </td> <td> digital_io[9] </td></tr>
+ <tr align="center"> <td> Pin-6 </td> <td> PD4/TXD[1] </td> <td> D4 </td> <td> digital_io[10] </td></tr>
<tr align="center"> <td> Pin-7 </td> <td> VCC </td> <td> </td> <td> - </td></tr>
<tr align="center"> <td> Pin-8 </td> <td> GND </td> <td> </td> <td> - </td></tr>
- <tr align="center"> <td> Pin-9 </td> <td> PB6/XTAL1/TOSC1 </td> <td> </td> <td> digital_io[6] </td></tr>
- <tr align="center"> <td> Pin-10 </td> <td> PB7/XTAL2/TOSC2 </td> <td> </td> <td> digital_io[7] </td></tr>
- <tr align="center"> <td> Pin-11 </td> <td> PD5/SS[3]/OC0B(PWM1)/T1 </td> <td> D5 </td> <td> digital_io[8] </td></tr>
- <tr align="center"> <td> Pin-12 </td> <td> PD6/SS[2]/OC0A(PWM2)/AIN0 </td> <td> D6 </td> <td> digital_io[9] /analog_io[2] </td></tr>
- <tr align="center"> <td> Pin-13 </td> <td> PD7/A1N1 </td> <td> D7 </td> <td> digital_io[10]/analog_io[3] </td></tr>
- <tr align="center"> <td> Pin-14 </td> <td> PB0/CLKO/ICP1 </td> <td> D8 </td> <td> digital_io[11] </td></tr>
- <tr align="center"> <td> Pin-15 </td> <td> PB1/SS[1]OC1A(PWM3) </td> <td> D9 </td> <td> digital_io[12] </td></tr>
- <tr align="center"> <td> Pin-16 </td> <td> PB2/SS[0]/OC1B(PWM4) </td> <td> D10 </td> <td> digital_io[13] </td></tr>
- <tr align="center"> <td> Pin-17 </td> <td> PB3/MOSI/OC2A(PWM5) </td> <td> D11 </td> <td> digital_io[14] </td></tr>
- <tr align="center"> <td> Pin-18 </td> <td> PB4/MISO </td> <td> D12 </td> <td> digital_io[15] </td></tr>
- <tr align="center"> <td> Pin-19 </td> <td> PB5/SCK </td> <td> D13 </td> <td> digital_io[16] </td></tr>
+ <tr align="center"> <td> Pin-9 </td> <td> PB6/XTAL1/TOSC1 </td> <td> </td> <td> digital_io[11] </td></tr>
+ <tr align="center"> <td> Pin-10 </td> <td> PB7/XTAL2/TOSC2 </td> <td> </td> <td> digital_io[12] </td></tr>
+ <tr align="center"> <td> Pin-11 </td> <td> PD5/SS[3]/OC0B(PWM1)/T1 </td> <td> D5 </td> <td> digital_io[13] </td></tr>
+ <tr align="center"> <td> Pin-12 </td> <td> PD6/SS[2]/OC0A(PWM2)/AIN0 </td> <td> D6 </td> <td> digital_io[14] /analog_io[2] </td></tr>
+ <tr align="center"> <td> Pin-13 </td> <td> PD7/A1N1 </td> <td> D7 </td> <td> digital_io[15]/analog_io[3] </td></tr>
+ <tr align="center"> <td> Pin-14 </td> <td> PB0/CLKO/ICP1 </td> <td> D8 </td> <td> digital_io[16] </td></tr>
+ <tr align="center"> <td> Pin-15 </td> <td> PB1/SS[1]OC1A(PWM3) </td> <td> D9 </td> <td> digital_io[17] </td></tr>
+ <tr align="center"> <td> Pin-16 </td> <td> PB2/SS[0]/OC1B(PWM4) </td> <td> D10 </td> <td> digital_io[18] </td></tr>
+ <tr align="center"> <td> Pin-17 </td> <td> PB3/MOSI/OC2A(PWM5) </td> <td> D11 </td> <td> digital_io[19] </td></tr>
+ <tr align="center"> <td> Pin-18 </td> <td> PB4/MISO </td> <td> D12 </td> <td> digital_io[20] </td></tr>
+ <tr align="center"> <td> Pin-19 </td> <td> PB5/SCK </td> <td> D13 </td> <td> digital_io[21] </td></tr>
<tr align="center"> <td> Pin-20 </td> <td> AVCC </td> <td> </td> <td> - </td></tr>
<tr align="center"> <td> Pin-21 </td> <td> AREF </td> <td> </td> <td> analog_io[10] </td></tr>
<tr align="center"> <td> Pin-22 </td> <td> GND </td> <td> </td> <td> - </td></tr>
- <tr align="center"> <td> Pin-23 </td> <td> PC0/ADC0 </td> <td> A0 </td> <td> digital_io[18]/analog_io[11] </td></tr>
- <tr align="center"> <td> Pin-24 </td> <td> PC1/ADC1 </td> <td> A1 </td> <td> digital_io[19]/analog_io[12] </td></tr>
- <tr align="center"> <td> Pin-25 </td> <td> PC2/ADC2 </td> <td> A2 </td> <td> digital_io[20]/analog_io[13] </td></tr>
- <tr align="center"> <td> Pin-26 </td> <td> PC3/ADC3 </td> <td> A3 </td> <td> digital_io[21]/analog_io[14] </td></tr>
- <tr align="center"> <td> Pin-27 </td> <td> PC4/ADC4/SDA </td> <td> A4 </td> <td> digital_io[22]/analog_io[15] </td></tr>
- <tr align="center"> <td> Pin-28 </td> <td> PC5/ADC5/SCL </td> <td> A5 </td> <td> digital_io[23]/analog_io[16] </td></tr>
+ <tr align="center"> <td> Pin-23 </td> <td> PC0/uartm_rxd/ADC0 </td> <td> A0 </td> <td> digital_io[22]/analog_io[11] </td></tr>
+ <tr align="center"> <td> Pin-24 </td> <td> PC1/uartm/ADC1 </td> <td> A1 </td> <td> digital_io[23]/analog_io[12] </td></tr>
+ <tr align="center"> <td> Pin-25 </td> <td> PC2/usb_dp/ADC2 </td> <td> A2 </td> <td> digital_io[24]/analog_io[13] </td></tr>
+ <tr align="center"> <td> Pin-26 </td> <td> PC3/usb_dn/ADC3 </td> <td> A3 </td> <td> digital_io[25]/analog_io[14] </td></tr>
+ <tr align="center"> <td> Pin-27 </td> <td> PC4/ADC4/SDA </td> <td> A4 </td> <td> digital_io[26]/analog_io[15] </td></tr>
+ <tr align="center"> <td> Pin-28 </td> <td> PC5/ADC5/SCL </td> <td> A5 </td> <td> digital_io[27]/analog_io[16] </td></tr>
<tr align="center"> <td colspan="4"> Additional Pad used for Externam ROM/RAM/USB </td></tr>
- <tr align="center"> <td> Sflash </td> <td> sflash_sck </td> <td> </td> <td> digital_io[24] </td></tr>
- <tr align="center"> <td> SFlash </td> <td> sflash_ss0 </td> <td> </td> <td> digital_io[25] </td></tr>
- <tr align="center"> <td> SFlash </td> <td> sflash_ss1 </td> <td> </td> <td> digital_io[26] </td></tr>
- <tr align="center"> <td> SFlash </td> <td> sflash_ss2 </td> <td> </td> <td> digital_io[27] </td></tr>
- <tr align="center"> <td> SFlash </td> <td> sflash_ss3 </td> <td> </td> <td> digital_io[28] </td></tr>
- <tr align="center"> <td> SFlash </td> <td> sflash_io0 </td> <td> </td> <td> digital_io[29] </td></tr>
- <tr align="center"> <td> SFlash </td> <td> sflash_io1 </td> <td> </td> <td> digital_io[30] </td></tr>
- <tr align="center"> <td> SFlash </td> <td> sflash_io2 </td> <td> </td> <td> digital_io[31] </td></tr>
- <tr align="center"> <td> SFlash </td> <td> sflash_io3 </td> <td> </td> <td> digital_io[32] </td></tr>
- <tr align="center"> <td> SSRAM </td> <td> dbg_clk_mon </td> <td> </td> <td> digital_io[33] </td></tr>
- <tr align="center"> <td> SSRAM </td> <td> uartm rxd </td> <td> </td> <td> digital_io[34] </td></tr>
- <tr align="center"> <td> SSRAM </td> <td> uartm txd </td> <td> </td> <td> digital_io[35] </td></tr>
- <tr align="center"> <td> usb1.1 </td> <td> usb_dp </td> <td> </td> <td> digital_io[36] </td></tr>
- <tr align="center"> <td> usb1.1 </td> <td> usb_dn </td> <td> </td> <td> digital_io[37] </td></tr>
+ <tr align="center"> <td> Sflash </td> <td> sflash_sck </td> <td> </td> <td> digital_io[28] </td></tr>
+ <tr align="center"> <td> SFlash </td> <td> sflash_ss0 </td> <td> </td> <td> digital_io[29] </td></tr>
+ <tr align="center"> <td> SFlash </td> <td> sflash_ss1 </td> <td> </td> <td> digital_io[30] </td></tr>
+ <tr align="center"> <td> SFlash </td> <td> sflash_ss2 </td> <td> </td> <td> digital_io[31] </td></tr>
+ <tr align="center"> <td> SFlash </td> <td> sflash_ss3 </td> <td> </td> <td> digital_io[32] </td></tr>
+ <tr align="center"> <td> SFlash </td> <td> sflash_io0 </td> <td> </td> <td> digital_io[33] </td></tr>
+ <tr align="center"> <td> SFlash </td> <td> sflash_io1 </td> <td> </td> <td> digital_io[34] </td></tr>
+ <tr align="center"> <td> SFlash </td> <td> sflash_io2 </td> <td> </td> <td> digital_io[35] </td></tr>
+ <tr align="center"> <td> SFlash </td> <td> sflash_io3 </td> <td> </td> <td> digital_io[36] </td></tr>
+ <tr align="center"> <td> DEBUG </td> <td> dbg_clk_mon </td> <td> </td> <td> digital_io[37] </td></tr>
+ <tr align="center"> <td> SPARE </td> <td> PA0 </td> <td> </td> <td> digital_io[0] </td></tr>
+ <tr align="center"> <td> SPARE </td> <td> PA1 </td> <td> </td> <td> digital_io[1] </td></tr>
+ <tr align="center"> <td> SPARE </td> <td> PA2 </td> <td> </td> <td> digital_io[2] </td></tr>
+ <tr align="center"> <td> SPARE </td> <td> PA3 </td> <td> </td> <td> digital_io[3] </td></tr>
+ <tr align="center"> <td> SPARE </td> <td> PA4 </td> <td> </td> <td> digital_io[4] </td></tr>
</table>
@@ -312,36 +340,18 @@
<td align="center"> SSPI</td>
</tr>
<tr>
+ <td align="center"> 0x1001_01C0 to 0x1001_013F</td>
+ <td align="center"> 0x1001_01C0 to 0x1001_013F</td>
+ <td align="center"> 0x1001_01C0 to 0x1001_013F</td>
+ <td align="center"> SSPI</td>
+ </tr>
+ <tr>
<td align="center"> 0x1002_0080 to 0x1002_00FF</td>
<td align="center"> 0x1002_0080 to 0x1002_00FF</td>
<td align="center"> 0x1002_0080 to 0x1002_00FF</td>
<td align="center"> PINMUX</td>
</tr>
<tr>
- <td align="center"> 0x1003_0080 to 0x1003_07FF</td>
- <td align="center"> 0x1003_0080 to 0x1003_07FF</td>
- <td align="center"> 0x1003_0080 to 0x1003_07FF</td>
- <td align="center"> SRAM-0 (2KB)</td>
- </tr>
- <tr>
- <td align="center"> 0x1003_0800 to 0x1003_0FFF</td>
- <td align="center"> 0x1003_0800 to 0x1003_0FFF</td>
- <td align="center"> 0x1003_0800 to 0x1003_0FFF</td>
- <td align="center"> SRAM-1 (2KB)</td>
- </tr>
- <tr>
- <td align="center"> 0x1003_1000 to 0x1003_17FF</td>
- <td align="center"> 0x1003_1000 to 0x1003_17FF</td>
- <td align="center"> 0x1003_1000 to 0x1003_17FF</td>
- <td align="center"> SRAM-2 (2KB)</td>
- </tr>
- <tr>
- <td align="center"> 0x1003_1800 to 0x1003_1FFF</td>
- <td align="center"> 0x1003_1800 to 0x1003_1FFF</td>
- <td align="center"> 0x1003_1800 to 0x1003_1FFF</td>
- <td align="center"> SRAM-3 (2KB)</td>
- </tr>
- <tr>
<td align="center"> -</td>
<td align="center"> -</td>
<td align="center"> 0x3080_0000 to 0x3080_00FF</td>
@@ -540,42 +550,6 @@
-# Repository contents
-
-```
-|verilog
-| ├─ rtl
-| | |- syntacore
-| | | |─ scr1
-| | | | ├─ **docs** | **SCR1 documentation**
-| | | | | ├─ scr1_eas.pdf | SCR1 External Architecture Specification
-| | | | | └─ scr1_um.pdf | SCR1 User Manual
-| | | | |─ **src** | **SCR1 RTL source and testbench files**
-| | | | | ├─ includes | Header files
-| | | | | ├─ core | Core top source files
-| | | | | ├─ top | Cluster source files
-| | | | |─ **synth** | **SCR1 RTL Synthesis files **
-| | |- Qspi_master
-| | | |- src | Qard SPI Master Source files
-| | |-wb_interconnect
-| | | |- src | 3x4 Wishbone Interconnect
-| | |- digital_core
-| | | |- src | Digital core Source files
-| | |- lib | common library source files
-| |- dv
-| | |- la_test1 | carevel LA test
-| | |- risc_boot | user core risc boot test
-| | |- wb_port | user wishbone test
-| | |- user_risc_boot | user standalone test without carevel soc
-| |- gl | ** GLS Source files **
-|
-|- openlane
- |- spi_master | spi_master openlane scripts
- |- syntacore | Risc Core openlane scripts
- |- user_project_wrapper | carvel user project wrapper
-
-```
-
# Prerequisites
- Docker (ensure docker daemon is running) -- tested with version 19.03.12, but any recent version should suffice.
@@ -694,6 +668,14 @@
make verify-riscv_regress - standalone riscv compliance test suite
make verify-arduino_risc_boot - standalone riscv core-0 boot using arduino tool set
make verify-arduino_hello_world - standalone riscv core-0 hello world test using arduino tool set
+ make verify-arduino_digital_port_control - standalone riscv core-0 digital port control using arduino tool set
+ make verify-arduino_ascii_table - standalone riscv core-0 ascii table using arduino tool set
+ make verify-arduino_character_analysis - standalone riscv core-0 character analysis using arduino tool set
+ make verify-arduino_multi_serial - standalone riscv core-0 multi uart test using arduino tool set
+ make verify-arduino_switchCase2 - standalone riscv core-0 switch case using arduino tool set
+ make verify-arduino_risc_boot - standalone riscv core-0 boot test using arduino tool set
+ make verify-arduino_string - standalone riscv core-0 string usage test using arduino tool set
+
make verify-user_mcore - standalone riscv multi-core test
make verify-user_sram_exec RISC_CORE=1 - standalone riscv core-1 test with executing code from data memory
make verify-user_risc_boot RISC_CORE=1 - standalone user risc core-1 boot test
@@ -702,7 +684,6 @@
make verify-user_aes RISC_CORE=1 - standalone aes test with risc core-1
make verify-user_cache_bypass RISC_CORE=1 - standalone icache and dcache bypass test with risc core-1
make verify-arduino_risc_boot RISC_CORE=1 - standalone riscv core-1 boot using arduino tool set
- make verify-arduino_hello_world RISC_CORE=1 - standalone riscv core-1 hello world test using arduino tool set
make verify-user_uart SIM=RTL DUMP=OFF - Standalone user uart-0 test using user risc core with waveform dump off
make verify-user_uart SIM=RTL DUMP=ON - Standalone user uart-0 test using user risc core with waveform dump on
diff --git a/TODO.md b/TODO.md
new file mode 100644
index 0000000..5870bb6
--- /dev/null
+++ b/TODO.md
@@ -0,0 +1,39 @@
+####################
+# Thsi file document the feature addition and status
+
+- 28th Aug 2022 - Dinesh A
+ A. Create 10 system strap pick following pads and generate pad direction control and master reset
+ sflash_sck, sflash_ss0,sflash_ss1,sflash_ss2,sflash_ss3,
+ sflash_io0,sflash_io1,sflash_io2,sflash_io3,dbg_clk_mon
+ B. uart master config control thrugh strap and remove dependency with caravel la_data_in
+ - baud rate control based on strap
+ C. Enable default reset enable for wishbone, qspi slave on power up (with delayed reset after strap loading)
+ D. Give option for Auto riscv core[0] removal based on strap
+ E. Default system clock selection based on strap
+ - wb clock or xtal pin
+ F. wbs and riscv, usb clock selection based on strap
+ G. strap to control the boot up configuration qspi-flash/sram
+ I. Riscv cache on/bypass through strap
+ J. Riscv SRAM edge selection through strap
+ K. Add Strap sticky bit for software based reboot
+ M. Created Master Reset control block to manage the boot sequence
+ A. Power On
+ - Power Up wait cycle minimum 50 ms (Add fast boot with strap)
+ - Strap latch control
+ - Pad Direction control
+ - core reset control
+ B,software reset request
+ - core reset control
+
+
+- 2 Sept 2022 - Dinesh A
+ QSPI Design Changes
+ Test case:
+ Add QSPI test case to validate parallel Direct and Indirect access
+ Design Change:
+ A. Add previous power on strap from SRAM flash to take care of mode switching
+ 1. If the current & previous sram strap is Single, then bypass mode switching
+ 2. If the current=Single and Previous: Quad, then switch mode by command 0xFF (RSTDQI)
+ 3. If the current=Quad and Previous: Quad, then bypass mode switching
+ 4. If the current=Quad and Previous: Single, then switch mode by command 0x38 (ESQI)
+ Note: Power On Always assume previous strap = Single
diff --git a/openlane/Makefile b/openlane/Makefile
index c21989a..14d5aac 100644
--- a/openlane/Makefile
+++ b/openlane/Makefile
@@ -43,7 +43,7 @@
@sleep 1
@if [ -f ./$*/interactive.tcl ]; then\
- docker run --rm -v $(OPENLANE_ROOT):/openlane \
+ docker run --rm \
-v $(PDK_ROOT):$(PDK_ROOT) \
-v $(PWD)/..:$(PWD)/.. \
-v $(MCW_ROOT):$(MCW_ROOT) \
@@ -57,7 +57,7 @@
-u $(shell id -u $(USER)):$(shell id -g $(USER)) \
$(OPENLANE_IMAGE_NAME) sh -c $(OPENLANE_INTERACTIVE_COMMAND);\
else\
- docker run --rm -v $(OPENLANE_ROOT):/openlane \
+ docker run --rm \
-v $(PDK_ROOT):$(PDK_ROOT) \
-v $(PWD)/..:$(PWD)/.. \
-v $(CARAVEL_ROOT):$(CARAVEL_ROOT) \
diff --git a/openlane/pinmux_top/config.tcl b/openlane/pinmux_top/config.tcl
index 57819dc..f5360ec 100755
--- a/openlane/pinmux_top/config.tcl
+++ b/openlane/pinmux_top/config.tcl
@@ -55,13 +55,21 @@
$::env(DESIGN_DIR)/../../verilog/rtl/pinmux/src/timer_reg.sv \
$::env(DESIGN_DIR)/../../verilog/rtl/pinmux/src/timer.sv \
$::env(DESIGN_DIR)/../../verilog/rtl/pinmux/src/semaphore_reg.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/pinmux/src/ws281x_top.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/pinmux/src/ws281x_driver.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/pinmux/src/ws281x_reg.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/pinmux/src/strap_ctrl.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/pinmux/src/glbl_rst_reg.sv \
$::env(DESIGN_DIR)/../../verilog/rtl/lib/pulse_gen_type1.sv \
$::env(DESIGN_DIR)/../../verilog/rtl/lib/pulse_gen_type2.sv \
$::env(DESIGN_DIR)/../../verilog/rtl/lib/registers.v \
$::env(DESIGN_DIR)/../../verilog/rtl/lib/ctech_cells.sv \
$::env(DESIGN_DIR)/../../verilog/rtl/lib/reset_sync.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/sync_fifo.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/clk_ctl.v \
"
+set ::env(VERILOG_INCLUDE_DIRS) [glob $::env(DESIGN_DIR)/../../verilog/rtl/ ]
set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
@@ -80,7 +88,7 @@
set ::env(FP_PIN_ORDER_CFG) $::env(DESIGN_DIR)/pin_order.cfg
set ::env(FP_SIZING) absolute
-set ::env(DIE_AREA) "0 0 500 400"
+set ::env(DIE_AREA) "0 0 500 750"
# If you're going to use multiple power domains, then keep this disabled.
@@ -90,23 +98,34 @@
set ::env(PL_TIME_DRIVEN) 1
-set ::env(PL_TARGET_DENSITY) "0.40"
+set ::env(PL_TARGET_DENSITY) "0.38"
set ::env(CELL_PAD) "4"
+#set ::env(GRT_ADJUSTMENT) {0.2}
-set ::env(FP_IO_VEXTEND) {6}
-set ::env(FP_IO_HEXTEND) {6}
+
+######################################################################################
+# Metal-2/3 Signal are Routed near to block boundary is creating DRC violation at Top-level
+# during pad connectivity
+#set ::env(FP_IO_HEXTEND) {1}
+#set ::env(FP_IO_VEXTEND) {1}
+
+#set ::env(GRT_OBS) " \
+# met2 0 2 500 3, \
+# met2 0 747 500 748, \
+# met3 2 0 3 750, \
+# met3 497 0 498 750"
# helps in anteena fix
-set ::env(USE_ARC_ANTENNA_CHECK) "0"
+set ::env(USE_ARC_ANTENNA_CHECK) "1"
set ::env(FP_IO_VEXTEND) 4
set ::env(FP_IO_HEXTEND) 4
set ::env(FP_PDN_VPITCH) 100
set ::env(FP_PDN_HPITCH) 100
-set ::env(FP_PDN_VWIDTH) 5
-set ::env(FP_PDN_HWIDTH) 5
+set ::env(FP_PDN_VWIDTH) 6.2
+set ::env(FP_PDN_HWIDTH) 6.2
#set ::env(GLB_RT_MAXLAYER) 5
set ::env(RT_MAX_LAYER) {met4}
@@ -115,6 +134,10 @@
set ::env(DIODE_INSERTION_STRATEGY) 4
+#LVS Issue - DEF Base looks to having issue
+set ::env(MAGIC_EXT_USE_GDS) {1}
+
+
set ::env(QUIT_ON_TIMING_VIOLATIONS) "0"
set ::env(QUIT_ON_MAGIC_DRC) "1"
set ::env(QUIT_ON_LVS_ERROR) "1"
diff --git a/openlane/pinmux_top/pin_order.cfg b/openlane/pinmux_top/pin_order.cfg
index 6dc053a..724e4f3 100644
--- a/openlane/pinmux_top/pin_order.cfg
+++ b/openlane/pinmux_top/pin_order.cfg
@@ -2,8 +2,7 @@
#MANUAL_PLACE
#S
-h_reset_n 000 0 2
-cpu_core_rst_n\[1\]
+cpu_core_rst_n\[1\] 000 0 2
cpu_core_rst_n\[0\]
cpu_intf_rst_n
qspim_rst_n
@@ -63,7 +62,82 @@
spis_miso
spis_mosi
-pinmux_debug\[0\] 0100 0 2
+cfg_strap_pad_ctrl 0100 0 4
+user_clock1
+user_clock2
+int_pll_clock
+xtal_clk
+e_reset_n
+p_reset_n
+s_reset_n
+rtc_clk
+usb_clk
+strap_sticky\[31\]
+strap_sticky\[30\]
+strap_sticky\[29\]
+strap_sticky\[28\]
+strap_sticky\[27\]
+strap_sticky\[26\]
+strap_sticky\[25\]
+strap_sticky\[24\]
+strap_sticky\[23\]
+strap_sticky\[22\]
+strap_sticky\[21\]
+strap_sticky\[20\]
+strap_sticky\[19\]
+strap_sticky\[18\]
+strap_sticky\[17\]
+strap_sticky\[16\]
+strap_sticky\[15\]
+strap_sticky\[14\]
+strap_sticky\[13\]
+strap_sticky\[12\]
+strap_sticky\[11\]
+strap_sticky\[10\]
+strap_sticky\[9\]
+strap_sticky\[8\]
+strap_sticky\[7\]
+strap_sticky\[6\]
+strap_sticky\[5\]
+strap_sticky\[4\]
+strap_sticky\[3\]
+strap_sticky\[2\]
+strap_sticky\[1\]
+strap_sticky\[0\]
+system_strap\[31\]
+system_strap\[30\]
+system_strap\[29\]
+system_strap\[28\]
+system_strap\[27\]
+system_strap\[26\]
+system_strap\[25\]
+system_strap\[24\]
+system_strap\[23\]
+system_strap\[22\]
+system_strap\[21\]
+system_strap\[20\]
+system_strap\[19\]
+system_strap\[18\]
+system_strap\[17\]
+system_strap\[16\]
+system_strap\[15\]
+system_strap\[14\]
+system_strap\[13\]
+system_strap\[12\]
+system_strap\[11\]
+system_strap\[10\]
+system_strap\[9\]
+system_strap\[8\]
+system_strap\[7\]
+system_strap\[6\]
+system_strap\[5\]
+system_strap\[4\]
+system_strap\[3\]
+system_strap\[2\]
+system_strap\[1\]
+system_strap\[0\]
+
+pinmux_debug\[0\] 0300 0 2
pinmux_debug\[1\]
pinmux_debug\[2\]
pinmux_debug\[3\]
@@ -100,6 +174,22 @@
#W
soft_irq
+irq_lines\[31\]
+irq_lines\[30\]
+irq_lines\[29\]
+irq_lines\[28\]
+irq_lines\[27\]
+irq_lines\[26\]
+irq_lines\[25\]
+irq_lines\[24\]
+irq_lines\[23\]
+irq_lines\[22\]
+irq_lines\[21\]
+irq_lines\[20\]
+irq_lines\[19\]
+irq_lines\[18\]
+irq_lines\[17\]
+irq_lines\[16\]
irq_lines\[15\]
irq_lines\[14\]
irq_lines\[13\]
@@ -129,6 +219,7 @@
reg_cs 200 0
reg_wr
+reg_addr\[9\]
reg_addr\[8\]
reg_addr\[7\]
reg_addr\[6\]
@@ -304,7 +395,8 @@
#E
-digital_io_in\[0\] 0000 0 4
+
+digital_io_in\[0\] 0200 0 4
digital_io_out\[0\]
digital_io_oen\[0\]
digital_io_in\[1\]
diff --git a/openlane/qspim_top/config.tcl b/openlane/qspim_top/config.tcl
index 0ce98bf..f715632 100755
--- a/openlane/qspim_top/config.tcl
+++ b/openlane/qspim_top/config.tcl
@@ -85,13 +85,13 @@
# helps in anteena fix
set ::env(USE_ARC_ANTENNA_CHECK) "0"
-set ::env(FP_IO_VEXTEND) 4
-set ::env(FP_IO_HEXTEND) 4
+#set ::env(FP_IO_VEXTEND) 4
+#set ::env(FP_IO_HEXTEND) 4
set ::env(FP_PDN_VPITCH) 100
set ::env(FP_PDN_HPITCH) 100
-set ::env(FP_PDN_VWIDTH) 5
-set ::env(FP_PDN_HWIDTH) 5
+set ::env(FP_PDN_VWIDTH) 6.2
+set ::env(FP_PDN_HWIDTH) 6.2
#set ::env(GLB_RT_MAXLAYER) 5
set ::env(RT_MAX_LAYER) {met4}
diff --git a/openlane/qspim_top/pin_order.cfg b/openlane/qspim_top/pin_order.cfg
index a0c3c37..9f93b81 100644
--- a/openlane/qspim_top/pin_order.cfg
+++ b/openlane/qspim_top/pin_order.cfg
@@ -53,8 +53,6 @@
spi_oen\[1\]
spi_oen\[0\]
-#N
-rst_n
#W
cfg_cska_sp_co\[3\] 0000 0 2
@@ -185,3 +183,12 @@
wbd_ack_o
wbd_lack_o
wbd_err_o
+
+
+#S
+rst_n
+cfg_init_bypass
+strap_sram
+strap_pre_sram
+strap_flash\[1\]
+strap_flash\[0\]
diff --git a/openlane/uart_i2cm_usb_spi_top/base.sdc b/openlane/uart_i2cm_usb_spi_top/base.sdc
index 35bba97..3218d29 100644
--- a/openlane/uart_i2cm_usb_spi_top/base.sdc
+++ b/openlane/uart_i2cm_usb_spi_top/base.sdc
@@ -60,7 +60,7 @@
set_output_delay -max 1.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_ack}]
set_output_delay -max 1.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_rdata[*]}]
-set_output_delay -min -2.7500 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_ack}]
+set_output_delay -min 1.0000 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_ack}]
set_output_delay -min -2.7500 -clock [get_clocks {app_clk}] -add_delay [get_ports {reg_rdata[*]}]
set_multicycle_path -setup -from [get_ports {reg_addr[*]}] -to [get_ports {reg_ack}] 2
diff --git a/openlane/uart_i2cm_usb_spi_top/config.tcl b/openlane/uart_i2cm_usb_spi_top/config.tcl
index 39350c5..b317ba7 100644
--- a/openlane/uart_i2cm_usb_spi_top/config.tcl
+++ b/openlane/uart_i2cm_usb_spi_top/config.tcl
@@ -92,7 +92,7 @@
set ::env(FP_PIN_ORDER_CFG) $::env(DESIGN_DIR)/pin_order.cfg
set ::env(FP_SIZING) "absolute"
-set ::env(DIE_AREA) [list 0.0 0.0 520.0 725.0]
+set ::env(DIE_AREA) [list 0.0 0.0 520.0 800.0]
@@ -103,18 +103,18 @@
set ::env(PL_TIME_DRIVEN) 1
-set ::env(PL_TARGET_DENSITY) "0.46"
+set ::env(PL_TARGET_DENSITY) "0.42"
# helps in anteena fix
set ::env(USE_ARC_ANTENNA_CHECK) "0"
-set ::env(FP_IO_VEXTEND) 4
-set ::env(FP_IO_HEXTEND) 4
+#set ::env(FP_IO_VEXTEND) 4
+#set ::env(FP_IO_HEXTEND) 4
set ::env(FP_PDN_VPITCH) 100
set ::env(FP_PDN_HPITCH) 100
-set ::env(FP_PDN_VWIDTH) 5
-set ::env(FP_PDN_HWIDTH) 5
+set ::env(FP_PDN_VWIDTH) 6.2
+set ::env(FP_PDN_HWIDTH) 6.2
#set ::env(GLB_RT_MAXLAYER) 5
set ::env(RT_MAX_LAYER) {met4}
@@ -125,8 +125,8 @@
set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) {1}
#set ::env(GLB_RT_ADJUSTMENT) {0.25}
-set ::env(GLB_RT_LAYER_ADJUSTMENTS) {0.25,0,0,0,0,0}
-set ::env(CELL_PAD) {2}
+set ::env(GRT_LAYER_ADJUSTMENTS) {0.25,0,0,0,0,0}
+set ::env(CELL_PAD) {8}
set ::env(QUIT_ON_TIMING_VIOLATIONS) "0"
set ::env(QUIT_ON_MAGIC_DRC) "1"
diff --git a/openlane/user_project_wrapper/config.tcl b/openlane/user_project_wrapper/config.tcl
index 8bace80..75b1974 100644
--- a/openlane/user_project_wrapper/config.tcl
+++ b/openlane/user_project_wrapper/config.tcl
@@ -56,7 +56,7 @@
### Macro Placement
set ::env(MACRO_PLACEMENT_CFG) $::env(DESIGN_DIR)/macro.cfg
-#set ::env(PDN_CFG) $::env(DESIGN_DIR)/pdn_cfg.tcl
+set ::env(PDN_CFG) $::env(DESIGN_DIR)/pdn_cfg.tcl
set ::env(SDC_FILE) $::env(DESIGN_DIR)/base.sdc
set ::env(BASE_SDC_FILE) $::env(DESIGN_DIR)/base.sdc
@@ -100,8 +100,7 @@
$gds_root/ycr_core_top.gds \
$gds_root/ycr2_iconnect.gds \
$gds_root/digital_pll.gds \
- $::env(PDK_ROOT)/sky130B/libs.ref/sky130_sram_macros/gds/sky130_sram_2kbyte_1rw1r_32x512_8.gds \
- "
+ $::env(PDK_ROOT)/sky130B/libs.ref/sky130_sram_macros/gds/sky130_sram_2kbyte_1rw1r_32x512_8.gds "
set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
@@ -110,17 +109,30 @@
#set ::env(GLB_RT_MAXLAYER) 6
set ::env(RT_MAX_LAYER) {met5}
-set ::env(FP_PDN_CHECK_NODES) 0
-
-
## Internal Macros
### Macro PDN Connections
-set ::env(FP_PDN_ENABLE_MACROS_GRID) "1"
-#set ::env(FP_PDN_ENABLE_GLOBAL_CONNECTIONS) "1"
+set ::env(FP_PDN_ENABLE_MACROS_GRID) {1}
+set ::env(FP_PDN_ENABLE_GLOBAL_CONNECTIONS) "0"
+set ::env(FP_PDN_CHECK_NODES) 1
+set ::env(FP_PDN_ENABLE_RAILS) 0
+set ::env(FP_PDN_IRDROP) "1"
+set ::env(FP_PDN_HORIZONTAL_HALO) "10"
+set ::env(FP_PDN_VERTICAL_HALO) "10"
+set ::env(FP_PDN_VOFFSET) "5"
+set ::env(FP_PDN_VPITCH) "60"
+set ::env(FP_PDN_HOFFSET) "5"
+set ::env(FP_PDN_HPITCH) "60"
+set ::env(FP_PDN_HWIDTH) {6.2}
+set ::env(FP_PDN_VWIDTH) {6.2}
+set ::env(FP_PDN_HSPACING) {20}
+set ::env(FP_PDN_VSPACING) {20}
+
+set ::env(VDD_NETS) {vccd1 vccd2 vdda1 vdda2}
+set ::env(GND_NETS) {vssd1 vssd2 vssa1 vssa2}
set ::env(VDD_NET) {vccd1}
-set ::env(VDD_PIN) {vccd1}
set ::env(GND_NET) {vssd1}
+set ::env(VDD_PIN) {vccd1}
set ::env(GND_PIN) {vssd1}
@@ -128,17 +140,15 @@
li1 150 130 833.1 546.54,\
met1 150 130 833.1 546.54,\
met2 150 130 833.1 546.54,\
- met3 150 130 833.1 546.54,\
-
+ met3 150 130 833.1 546.54,\
li1 950 130 1633.1 546.54,\
met1 950 130 1633.1 546.54,\
met2 950 130 1633.1 546.54,\
- met3 950 130 1633.1 546.54,\
-
- li1 150 750 833.1 1166.54,\
- met1 150 750 833.1 1166.54,\
- met2 150 750 833.1 1166.54,\
- met3 150 750 833.1 1166.54,\
+ met3 950 130 1633.1 546.54,\
+ li1 150 750 833.1 1166.54,\
+ met1 150 750 833.1 1166.54,\
+ met2 150 750 833.1 1166.54,\
+ met3 150 750 833.1 1166.54,\
met5 0 0 2920 3520"
#set ::env(FP_PDN_POWER_STRAPS) "vccd1 vssd1 1, vccd2 vssd2 0, vdda1 vssa1 1, vdda2 vssa2 1"
@@ -168,7 +178,6 @@
set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) 0
set ::env(PL_RESIZER_BUFFER_INPUT_PORTS) 0
set ::env(PL_RESIZER_BUFFER_OUTPUT_PORTS) 0
-set ::env(FP_PDN_ENABLE_RAILS) 0
set ::env(DIODE_INSERTION_STRATEGY) 0
set ::env(FILL_INSERTION) 0
set ::env(TAP_DECAP_INSERTION) 0
@@ -179,14 +188,4 @@
set ::env(QUIT_ON_SLEW_VIOLATIONS) "0"
set ::env(QUIT_ON_TIMING_VIOLATIONS) "0"
-set ::env(FP_PDN_IRDROP) "1"
-set ::env(FP_PDN_HORIZONTAL_HALO) "10"
-set ::env(FP_PDN_VERTICAL_HALO) "10"
-
-#
-
-set ::env(FP_PDN_VOFFSET) "5"
-set ::env(FP_PDN_VPITCH) "180"
-set ::env(FP_PDN_HOFFSET) "5"
-set ::env(FP_PDN_HPITCH) "180"
diff --git a/openlane/user_project_wrapper/macro.cfg b/openlane/user_project_wrapper/macro.cfg
index 994428f..cf8883d 100644
--- a/openlane/user_project_wrapper/macro.cfg
+++ b/openlane/user_project_wrapper/macro.cfg
@@ -1,16 +1,16 @@
u_qspi_master 2250 650 N
u_uart_i2c_usb_spi 2250 1350 N
-u_pinmux 2250 2150 N
+u_pinmux 2250 2250 N
-u_riscv_top.i_core_top_0 50 1400 N
-u_riscv_top.i_core_top_1 1200 1400 FN
-u_riscv_top.u_connect 725 1400 N
-u_riscv_top.u_intf 950 650 N
-u_dcache_2kb 150 130 N
-u_icache_2kb 950 130 N
-u_tsram0_2kb 150 750 N
+u_riscv_top.i_core_top_0 50 1400 N
+u_riscv_top.i_core_top_1 1200 1400 FN
+u_riscv_top.u_connect 735 1400 N
+u_riscv_top.u_intf 950 650 N
+u_dcache_2kb 150 130 N
+u_icache_2kb 950 130 N
+u_tsram0_2kb 150 750 N
-u_intercon 1850 650 N
-u_wb_host 1750 100 N
-u_pll 2305 105 N
+u_intercon 1850 650 N
+u_wb_host 1750 100 N
+u_pll 2300 68 N
diff --git a/openlane/user_project_wrapper/pdn.tcl b/openlane/user_project_wrapper/pdn.tcl
new file mode 100644
index 0000000..206ae5b
--- /dev/null
+++ b/openlane/user_project_wrapper/pdn.tcl
@@ -0,0 +1,54 @@
+# Copyright 2020-2022 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+foreach lib $::env(LIB_SYNTH_COMPLETE) {
+ read_liberty $lib
+}
+
+if { [info exists ::env(EXTRA_LIBS) ] } {
+ foreach lib $::env(EXTRA_LIBS) {
+ read_liberty $lib
+ }
+}
+
+if {[catch {read_lef $::env(MERGED_LEF)} errmsg]} {
+ puts stderr $errmsg
+ exit 1
+}
+
+if {[catch {read_def $::env(CURRENT_DEF)} errmsg]} {
+ puts stderr $errmsg
+ exit 1
+}
+
+# load the grid definitions
+if {[catch {source $::env(PDN_CFG)} errmsg]} {
+ puts stderr $errmsg
+ exit 1
+}
+
+# run PDNGEN
+if {[catch {pdngen} errmsg]} {
+ puts stderr $errmsg
+ exit 1
+}
+
+# checks for unconnected nodes (e.g., isolated rails or stripes)
+if { $::env(FP_PDN_CHECK_NODES) } {
+ check_power_grid -net $::env(VDD_NET)
+ check_power_grid -net $::env(GND_NET)
+}
+
+write_def $::env(SAVE_DEF)
+exit 1
diff --git a/openlane/user_project_wrapper/pdn_cfg.tcl b/openlane/user_project_wrapper/pdn_cfg.tcl
index 79a0f85..c1e213d 100644
--- a/openlane/user_project_wrapper/pdn_cfg.tcl
+++ b/openlane/user_project_wrapper/pdn_cfg.tcl
@@ -92,7 +92,8 @@
-width $::env(FP_PDN_VWIDTH) \
-pitch $::env(FP_PDN_VPITCH) \
-offset $::env(FP_PDN_VOFFSET) \
- -nets "$::env(VDD_NET) $::env(GND_NET)" \
+ -spacing $::env(FP_PDN_VSPACING) \
+ -nets "$::env(VDD_NET) $::env(GND_NET)" \
-starts_with POWER -extend_to_core_ring
add_pdn_stripe \
@@ -101,6 +102,7 @@
-width $::env(FP_PDN_HWIDTH) \
-pitch $::env(FP_PDN_HPITCH) \
-offset $::env(FP_PDN_HOFFSET) \
+ -spacing $::env(FP_PDN_HSPACING) \
-nets "$::env(VDD_NET) $::env(GND_NET)" \
-starts_with POWER -extend_to_core_ring
diff --git a/openlane/wb_host/config.tcl b/openlane/wb_host/config.tcl
index 527f4cc..f69b2c4 100755
--- a/openlane/wb_host/config.tcl
+++ b/openlane/wb_host/config.tcl
@@ -42,6 +42,7 @@
set ::env(VERILOG_FILES) "\
$::env(DESIGN_DIR)/../../verilog/rtl/clk_skew_adjust/src/clk_skew_adjust.gv \
$::env(DESIGN_DIR)/../../verilog/rtl/wb_host/src/wb_host.sv \
+ $::env(DESIGN_DIR)/../../verilog/rtl/wb_host/src/wb_reset_fsm.sv \
$::env(DESIGN_DIR)/../../verilog/rtl/lib/async_fifo.sv \
$::env(DESIGN_DIR)/../../verilog/rtl/lib/async_wb.sv \
$::env(DESIGN_DIR)/../../verilog/rtl/lib/clk_ctl.v \
@@ -52,6 +53,7 @@
$::env(DESIGN_DIR)/../../verilog/rtl/uart/src/uart_txfsm.sv \
$::env(DESIGN_DIR)/../../verilog/rtl/uart/src/uart_rxfsm.sv \
$::env(DESIGN_DIR)/../../verilog/rtl/lib/double_sync_low.v \
+ $::env(DESIGN_DIR)/../../verilog/rtl/lib/clk_div8.v \
$::env(DESIGN_DIR)/../../verilog/rtl/wb_interconnect/src/wb_arb.sv \
$::env(DESIGN_DIR)/../../verilog/rtl/uart2wb/src/uart2wb.sv \
$::env(DESIGN_DIR)/../../verilog/rtl/uart2wb/src/uart2_core.sv \
@@ -60,6 +62,7 @@
$::env(DESIGN_DIR)/../../verilog/rtl/sspis/src/sspis_if.sv \
$::env(DESIGN_DIR)/../../verilog/rtl/sspis/src/spi2wb.sv \
"
+set ::env(VERILOG_INCLUDE_DIRS) [glob $::env(DESIGN_DIR)/../../verilog/rtl/ ]
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
@@ -92,13 +95,13 @@
-set ::env(FP_IO_VEXTEND) 4
-set ::env(FP_IO_HEXTEND) 4
+#set ::env(FP_IO_VEXTEND) 4
+#set ::env(FP_IO_HEXTEND) 4
set ::env(FP_PDN_VPITCH) 100
set ::env(FP_PDN_HPITCH) 100
-set ::env(FP_PDN_VWIDTH) 5
-set ::env(FP_PDN_HWIDTH) 5
+set ::env(FP_PDN_VWIDTH) 6.2
+set ::env(FP_PDN_HWIDTH) 6.2
#set ::env(GLB_RT_MAXLAYER) 5
set ::env(RT_MAX_LAYER) {met4}
diff --git a/openlane/wb_host/pin_order.cfg b/openlane/wb_host/pin_order.cfg
index d0a5a57..2c6a14d 100644
--- a/openlane/wb_host/pin_order.cfg
+++ b/openlane/wb_host/pin_order.cfg
@@ -4,10 +4,8 @@
#W
-usb_clk 0000 0 4
cpu_clk 0100 0 2
-rtc_clk
@@ -350,3 +348,73 @@
wbs_cyc_o
+cfg_strap_pad_ctrl
+e_reset_n
+int_pll_clock
+p_reset_n
+s_reset_n
+xtal_clk
+strap_sticky\[31\]
+strap_sticky\[30\]
+strap_sticky\[29\]
+strap_sticky\[28\]
+strap_sticky\[27\]
+strap_sticky\[26\]
+strap_sticky\[25\]
+strap_sticky\[24\]
+strap_sticky\[23\]
+strap_sticky\[22\]
+strap_sticky\[21\]
+strap_sticky\[20\]
+strap_sticky\[19\]
+strap_sticky\[18\]
+strap_sticky\[17\]
+strap_sticky\[16\]
+strap_sticky\[15\]
+strap_sticky\[14\]
+strap_sticky\[13\]
+strap_sticky\[12\]
+strap_sticky\[11\]
+strap_sticky\[10\]
+strap_sticky\[9\]
+strap_sticky\[8\]
+strap_sticky\[7\]
+strap_sticky\[6\]
+strap_sticky\[5\]
+strap_sticky\[4\]
+strap_sticky\[3\]
+strap_sticky\[2\]
+strap_sticky\[1\]
+strap_sticky\[0\]
+system_strap\[31\]
+system_strap\[30\]
+system_strap\[29\]
+system_strap\[28\]
+system_strap\[27\]
+system_strap\[26\]
+system_strap\[25\]
+system_strap\[24\]
+system_strap\[23\]
+system_strap\[22\]
+system_strap\[21\]
+system_strap\[20\]
+system_strap\[19\]
+system_strap\[18\]
+system_strap\[17\]
+system_strap\[16\]
+system_strap\[15\]
+system_strap\[14\]
+system_strap\[13\]
+system_strap\[12\]
+system_strap\[11\]
+system_strap\[10\]
+system_strap\[9\]
+system_strap\[8\]
+system_strap\[7\]
+system_strap\[6\]
+system_strap\[5\]
+system_strap\[4\]
+system_strap\[3\]
+system_strap\[2\]
+system_strap\[1\]
+system_strap\[0\]
diff --git a/openlane/wb_interconnect/config.tcl b/openlane/wb_interconnect/config.tcl
index c58574a..de21996 100755
--- a/openlane/wb_interconnect/config.tcl
+++ b/openlane/wb_interconnect/config.tcl
@@ -51,7 +51,7 @@
set ::env(SYNTH_DEFINES) [list SYNTHESIS ]
set ::env(SYNTH_PARAMETERS) "CH_CLK_WD=4\
- CH_DATA_WD=37 \
+ CH_DATA_WD=53 \
"
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
@@ -135,3 +135,7 @@
## FANOUT Reduced to take care of long routes
set ::env(SYNTH_MAX_FANOUT) "2"
+set ::env(FP_PDN_VPITCH) 100
+set ::env(FP_PDN_HPITCH) 100
+set ::env(FP_PDN_VWIDTH) 6.2
+set ::env(FP_PDN_HWIDTH) 6.2
diff --git a/openlane/wb_interconnect/pin_order.cfg b/openlane/wb_interconnect/pin_order.cfg
index 2d8237e..93ca457 100644
--- a/openlane/wb_interconnect/pin_order.cfg
+++ b/openlane/wb_interconnect/pin_order.cfg
@@ -147,7 +147,23 @@
#W
-ch_data_out\[36\] 000 0 2
+ch_data_out\[52\] 000 0 2
+ch_data_out\[51\]
+ch_data_out\[50\]
+ch_data_out\[49\]
+ch_data_out\[48\]
+ch_data_out\[47\]
+ch_data_out\[46\]
+ch_data_out\[45\]
+ch_data_out\[44\]
+ch_data_out\[43\]
+ch_data_out\[42\]
+ch_data_out\[41\]
+ch_data_out\[40\]
+ch_data_out\[39\]
+ch_data_out\[38\]
+ch_data_out\[37\]
+ch_data_out\[36\]
ch_data_out\[35\]
ch_data_out\[34\]
ch_data_out\[33\]
@@ -705,7 +721,23 @@
s1_wbd_ack_i
s1_wbd_cyc_o
-ch_data_in\[36\] 1500 0 2
+ch_data_in\[52\] 1500 0 2
+ch_data_in\[51\]
+ch_data_in\[50\]
+ch_data_in\[49\]
+ch_data_in\[48\]
+ch_data_in\[47\]
+ch_data_in\[46\]
+ch_data_in\[45\]
+ch_data_in\[44\]
+ch_data_in\[43\]
+ch_data_in\[42\]
+ch_data_in\[41\]
+ch_data_in\[40\]
+ch_data_in\[39\]
+ch_data_in\[38\]
+ch_data_in\[37\]
+ch_data_in\[36\]
ch_data_in\[35\]
ch_data_in\[34\]
ch_data_in\[33\]
@@ -731,6 +763,7 @@
s2_wbd_stb_o 1600 0 2
s2_wbd_we_o
+s2_wbd_adr_o\[9\]
s2_wbd_adr_o\[8\]
s2_wbd_adr_o\[7\]
s2_wbd_adr_o\[6\]
diff --git a/openlane/ycr2_iconnect/config.tcl b/openlane/ycr2_iconnect/config.tcl
index a8f0493..76ec7e5 100644
--- a/openlane/ycr2_iconnect/config.tcl
+++ b/openlane/ycr2_iconnect/config.tcl
@@ -60,7 +60,7 @@
## Floorplan
set ::env(FP_PIN_ORDER_CFG) $::env(DESIGN_DIR)/pin_order.cfg
set ::env(FP_SIZING) absolute
-set ::env(DIE_AREA) "0 0 390 1100"
+set ::env(DIE_AREA) "0 0 390 1200"
set ::env(PL_TARGET_DENSITY) 0.20
set ::env(CELL_PAD) 2
@@ -79,20 +79,10 @@
set ::env(GLB_RESIZER_TIMING_OPTIMIZATIONS) {1}
### PDN
-#set ::env(FP_PDN_CHECK_NODES) "0"
-#set ::env(FP_PDN_HORIZONTAL_HALO) "10"
-#set ::env(FP_PDN_VERTICAL_HALO) "10"
-#
-#set ::env(FP_PDN_VOFFSET) "5"
-#set ::env(FP_PDN_VPITCH) "80"
-#set ::env(FP_PDN_VSPACING) "15.5"
-#set ::env(FP_PDN_VWIDTH) "3.1"
-#
-#set ::env(FP_PDN_HOFFSET) "10"
-#set ::env(FP_PDN_HPITCH) "100"
-#set ::env(FP_PDN_HSPACING) "10"
-#set ::env(FP_PDN_HWIDTH) "3.1"
-
+set ::env(FP_PDN_VPITCH) 100
+set ::env(FP_PDN_HPITCH) 100
+set ::env(FP_PDN_VWIDTH) 6.2
+set ::env(FP_PDN_HWIDTH) 6.2
#set ::env(GLB_RT_MAXLAYER) 5
set ::env(RT_MAX_LAYER) {met4}
diff --git a/openlane/ycr2_iconnect/pin_order.cfg b/openlane/ycr2_iconnect/pin_order.cfg
index 5cb4104..ab65df8 100644
--- a/openlane/ycr2_iconnect/pin_order.cfg
+++ b/openlane/ycr2_iconnect/pin_order.cfg
@@ -423,6 +423,22 @@
core0_timer_val\[1\]
core0_timer_val\[0\]
+core0_irq_lines\[31\]
+core0_irq_lines\[30\]
+core0_irq_lines\[29\]
+core0_irq_lines\[28\]
+core0_irq_lines\[27\]
+core0_irq_lines\[26\]
+core0_irq_lines\[25\]
+core0_irq_lines\[24\]
+core0_irq_lines\[23\]
+core0_irq_lines\[22\]
+core0_irq_lines\[21\]
+core0_irq_lines\[20\]
+core0_irq_lines\[19\]
+core0_irq_lines\[18\]
+core0_irq_lines\[17\]
+core0_irq_lines\[16\]
core0_irq_lines\[15\]
core0_irq_lines\[14\]
core0_irq_lines\[13\]
@@ -736,6 +752,22 @@
core1_timer_val\[2\]
core1_timer_val\[1\]
core1_timer_val\[0\]
+core1_irq_lines\[31\]
+core1_irq_lines\[30\]
+core1_irq_lines\[29\]
+core1_irq_lines\[28\]
+core1_irq_lines\[27\]
+core1_irq_lines\[26\]
+core1_irq_lines\[25\]
+core1_irq_lines\[24\]
+core1_irq_lines\[23\]
+core1_irq_lines\[22\]
+core1_irq_lines\[21\]
+core1_irq_lines\[20\]
+core1_irq_lines\[19\]
+core1_irq_lines\[18\]
+core1_irq_lines\[17\]
+core1_irq_lines\[16\]
core1_irq_lines\[15\]
core1_irq_lines\[14\]
core1_irq_lines\[13\]
@@ -1115,6 +1147,23 @@
riscv_debug\[1\]
riscv_debug\[0\]
+#N
+core_irq_lines_i\[31\]
+core_irq_lines_i\[30\]
+core_irq_lines_i\[29\]
+core_irq_lines_i\[28\]
+core_irq_lines_i\[27\]
+core_irq_lines_i\[26\]
+core_irq_lines_i\[25\]
+core_irq_lines_i\[24\]
+core_irq_lines_i\[23\]
+core_irq_lines_i\[22\]
+core_irq_lines_i\[21\]
+core_irq_lines_i\[20\]
+core_irq_lines_i\[19\]
+core_irq_lines_i\[18\]
+core_irq_lines_i\[17\]
+core_irq_lines_i\[16\]
core_irq_lines_i\[15\]
core_irq_lines_i\[14\]
core_irq_lines_i\[13\]
diff --git a/openlane/ycr_core_top/config.tcl b/openlane/ycr_core_top/config.tcl
index bc6ed3e..c4a2de6 100644
--- a/openlane/ycr_core_top/config.tcl
+++ b/openlane/ycr_core_top/config.tcl
@@ -76,8 +76,8 @@
set ::env(FP_SIZING) absolute
set ::env(DIE_AREA) "0 0 540 950 "
-set ::env(PL_TARGET_DENSITY) 0.43
-set ::env(CELL_PAD) "4"
+set ::env(PL_TARGET_DENSITY) 0.45
+set ::env(CELL_PAD) "8"
## Routing
set ::env(GRT_ADJUSTMENT) 0.2
@@ -96,3 +96,7 @@
#Need to cross-check why global timing opimization creating setup vio with hugh hold fix
set ::env(GLB_RESIZER_TIMING_OPTIMIZATIONS) "0"
+set ::env(FP_PDN_VPITCH) 100
+set ::env(FP_PDN_HPITCH) 100
+set ::env(FP_PDN_VWIDTH) 6.2
+set ::env(FP_PDN_HWIDTH) 6.2
diff --git a/openlane/ycr_core_top/pin_order.cfg b/openlane/ycr_core_top/pin_order.cfg
index 79b2c6f..8fc1648 100644
--- a/openlane/ycr_core_top/pin_order.cfg
+++ b/openlane/ycr_core_top/pin_order.cfg
@@ -296,6 +296,22 @@
core_mtimer_val_i\[1\]
core_mtimer_val_i\[0\]
+core_irq_lines_i\[31\]
+core_irq_lines_i\[30\]
+core_irq_lines_i\[29\]
+core_irq_lines_i\[28\]
+core_irq_lines_i\[27\]
+core_irq_lines_i\[26\]
+core_irq_lines_i\[25\]
+core_irq_lines_i\[24\]
+core_irq_lines_i\[23\]
+core_irq_lines_i\[22\]
+core_irq_lines_i\[21\]
+core_irq_lines_i\[20\]
+core_irq_lines_i\[19\]
+core_irq_lines_i\[18\]
+core_irq_lines_i\[17\]
+core_irq_lines_i\[16\]
core_irq_lines_i\[15\]
core_irq_lines_i\[14\]
core_irq_lines_i\[13\]
diff --git a/openlane/ycr_intf/config.tcl b/openlane/ycr_intf/config.tcl
index 524afd3..ab60789 100644
--- a/openlane/ycr_intf/config.tcl
+++ b/openlane/ycr_intf/config.tcl
@@ -69,8 +69,8 @@
set ::env(PL_TARGET_DENSITY) 0.37
-set ::env(FP_IO_VEXTEND) {6}
-set ::env(FP_IO_HEXTEND) {6}
+#set ::env(FP_IO_VEXTEND) {6}
+#set ::env(FP_IO_HEXTEND) {6}
set ::env(RT_MAX_LAYER) {met4}
#set ::env(GLB_RT_MAXLAYER) "5"
@@ -86,3 +86,8 @@
#Need to cross-check why global timing opimization creating setup vio with hugh hold fix
set ::env(GLB_RESIZER_TIMING_OPTIMIZATIONS) "0"
+#PDN
+set ::env(FP_PDN_VPITCH) 100
+set ::env(FP_PDN_HPITCH) 100
+set ::env(FP_PDN_VWIDTH) 6.2
+set ::env(FP_PDN_HWIDTH) 6.2
diff --git a/signoff/pinmux_top/OPENLANE_VERSION b/signoff/pinmux_top/OPENLANE_VERSION
index d5588cd..b5bf449 100644
--- a/signoff/pinmux_top/OPENLANE_VERSION
+++ b/signoff/pinmux_top/OPENLANE_VERSION
@@ -1 +1 @@
-openlane 6ab944bc23688cae6dc6fa32444891a1e57715c8
+openlane b6bacc9d1ab469917fda7ceea61ea3a18984b818
diff --git a/signoff/pinmux_top/PDK_SOURCES b/signoff/pinmux_top/PDK_SOURCES
index e8e14ea..f9d0f46 100644
--- a/signoff/pinmux_top/PDK_SOURCES
+++ b/signoff/pinmux_top/PDK_SOURCES
@@ -1 +1 @@
-open_pdks e8294524e5f67c533c5d0c3afa0bcc5b2a5fa066
+open_pdks 44a43c23c81b45b8e774ae7a84899a5a778b6b0b
diff --git a/signoff/qspim_top/OPENLANE_VERSION b/signoff/qspim_top/OPENLANE_VERSION
index d5588cd..b5bf449 100644
--- a/signoff/qspim_top/OPENLANE_VERSION
+++ b/signoff/qspim_top/OPENLANE_VERSION
@@ -1 +1 @@
-openlane 6ab944bc23688cae6dc6fa32444891a1e57715c8
+openlane b6bacc9d1ab469917fda7ceea61ea3a18984b818
diff --git a/signoff/qspim_top/PDK_SOURCES b/signoff/qspim_top/PDK_SOURCES
index e8e14ea..f9d0f46 100644
--- a/signoff/qspim_top/PDK_SOURCES
+++ b/signoff/qspim_top/PDK_SOURCES
@@ -1 +1 @@
-open_pdks e8294524e5f67c533c5d0c3afa0bcc5b2a5fa066
+open_pdks 44a43c23c81b45b8e774ae7a84899a5a778b6b0b
diff --git a/signoff/uart_i2cm_usb_spi_top/OPENLANE_VERSION b/signoff/uart_i2cm_usb_spi_top/OPENLANE_VERSION
index d5588cd..b5bf449 100644
--- a/signoff/uart_i2cm_usb_spi_top/OPENLANE_VERSION
+++ b/signoff/uart_i2cm_usb_spi_top/OPENLANE_VERSION
@@ -1 +1 @@
-openlane 6ab944bc23688cae6dc6fa32444891a1e57715c8
+openlane b6bacc9d1ab469917fda7ceea61ea3a18984b818
diff --git a/signoff/uart_i2cm_usb_spi_top/PDK_SOURCES b/signoff/uart_i2cm_usb_spi_top/PDK_SOURCES
index e8e14ea..f9d0f46 100644
--- a/signoff/uart_i2cm_usb_spi_top/PDK_SOURCES
+++ b/signoff/uart_i2cm_usb_spi_top/PDK_SOURCES
@@ -1 +1 @@
-open_pdks e8294524e5f67c533c5d0c3afa0bcc5b2a5fa066
+open_pdks 44a43c23c81b45b8e774ae7a84899a5a778b6b0b
diff --git a/signoff/user_project_wrapper/OPENLANE_VERSION b/signoff/user_project_wrapper/OPENLANE_VERSION
index d5588cd..b5bf449 100644
--- a/signoff/user_project_wrapper/OPENLANE_VERSION
+++ b/signoff/user_project_wrapper/OPENLANE_VERSION
@@ -1 +1 @@
-openlane 6ab944bc23688cae6dc6fa32444891a1e57715c8
+openlane b6bacc9d1ab469917fda7ceea61ea3a18984b818
diff --git a/signoff/user_project_wrapper/PDK_SOURCES b/signoff/user_project_wrapper/PDK_SOURCES
index e8e14ea..f9d0f46 100644
--- a/signoff/user_project_wrapper/PDK_SOURCES
+++ b/signoff/user_project_wrapper/PDK_SOURCES
@@ -1 +1 @@
-open_pdks e8294524e5f67c533c5d0c3afa0bcc5b2a5fa066
+open_pdks 44a43c23c81b45b8e774ae7a84899a5a778b6b0b
diff --git a/signoff/wb_host/OPENLANE_VERSION b/signoff/wb_host/OPENLANE_VERSION
index d5588cd..b5bf449 100644
--- a/signoff/wb_host/OPENLANE_VERSION
+++ b/signoff/wb_host/OPENLANE_VERSION
@@ -1 +1 @@
-openlane 6ab944bc23688cae6dc6fa32444891a1e57715c8
+openlane b6bacc9d1ab469917fda7ceea61ea3a18984b818
diff --git a/signoff/wb_host/PDK_SOURCES b/signoff/wb_host/PDK_SOURCES
index e8e14ea..f9d0f46 100644
--- a/signoff/wb_host/PDK_SOURCES
+++ b/signoff/wb_host/PDK_SOURCES
@@ -1 +1 @@
-open_pdks e8294524e5f67c533c5d0c3afa0bcc5b2a5fa066
+open_pdks 44a43c23c81b45b8e774ae7a84899a5a778b6b0b
diff --git a/signoff/wb_interconnect/OPENLANE_VERSION b/signoff/wb_interconnect/OPENLANE_VERSION
index d5588cd..b5bf449 100644
--- a/signoff/wb_interconnect/OPENLANE_VERSION
+++ b/signoff/wb_interconnect/OPENLANE_VERSION
@@ -1 +1 @@
-openlane 6ab944bc23688cae6dc6fa32444891a1e57715c8
+openlane b6bacc9d1ab469917fda7ceea61ea3a18984b818
diff --git a/signoff/wb_interconnect/PDK_SOURCES b/signoff/wb_interconnect/PDK_SOURCES
index e8e14ea..f9d0f46 100644
--- a/signoff/wb_interconnect/PDK_SOURCES
+++ b/signoff/wb_interconnect/PDK_SOURCES
@@ -1 +1 @@
-open_pdks e8294524e5f67c533c5d0c3afa0bcc5b2a5fa066
+open_pdks 44a43c23c81b45b8e774ae7a84899a5a778b6b0b
diff --git a/sta/scripts/caravel_timing.tcl b/sta/scripts/caravel_timing.tcl
index 0593e3b..e8fb7d2 100644
--- a/sta/scripts/caravel_timing.tcl
+++ b/sta/scripts/caravel_timing.tcl
@@ -1,26 +1,26 @@
set ::env(USER_ROOT) ".."
- set ::env(CARAVEL_ROOT) "/home/dinesha/workarea/efabless/MPW-6/caravel"
- set ::env(CARAVEL_PDK_ROOT) "/opt/pdk_mpw6"
+ set ::env(CARAVEL_ROOT) "/home/dinesha/workarea/efabless/MPW-7/caravel"
+ set ::env(CARAVEL_PDK_ROOT) "/opt/pdk_mpw7/sky130B"
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_sc_hd/lib/sky130_fd_sc_hd__tt_025C_1v80.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_sram_macros/lib/sky130_sram_2kbyte_1rw1r_32x512_8_TT_1p8V_25C.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_sram_macros/lib/sky130_sram_1kbyte_1rw1r_32x256_8_TT_1p8V_25C.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_sc_hvl/lib/sky130_fd_sc_hvl__tt_025C_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_sc_hvl/lib/sky130_fd_sc_hvl__tt_025C_3v30_lv1v80.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_gpiov2_tt_tt_025C_1v80_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_ground_hvc_wpad_tt_025C_1v80_3v30_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_ground_lvc_wpad_tt_025C_1v80_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_ground_lvc_wpad_tt_100C_1v80_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_power_lvc_wpad_tt_025C_1v80_3v30_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_xres4v2_tt_tt_025C_1v80_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_ef_io__gpiov2_pad_tt_tt_025C_1v80_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_ef_io__vccd_lvc_clamped_pad_tt_025C_1v80_3v30_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_ef_io__vdda_hvc_clamped_pad_tt_025C_1v80_3v30_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_ef_io__vssa_hvc_clamped_pad_tt_025C_1v80_3v30_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_ef_io__vssd_lvc_clamped3_pad_tt_025C_1v80_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_ef_io__vccd_lvc_clamped3_pad_tt_025C_1v80_3v30_3v30.lib
- read_liberty $::env(CARAVEL_PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/lib/sky130_ef_io__vssd_lvc_clamped_pad_tt_025C_1v80_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_sc_hd/lib/sky130_fd_sc_hd__tt_025C_1v80.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_sram_macros/lib/sky130_sram_2kbyte_1rw1r_32x512_8_TT_1p8V_25C.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_sram_macros/lib/sky130_sram_1kbyte_1rw1r_32x256_8_TT_1p8V_25C.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_sc_hvl/lib/sky130_fd_sc_hvl__tt_025C_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_sc_hvl/lib/sky130_fd_sc_hvl__tt_025C_3v30_lv1v80.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_gpiov2_tt_tt_025C_1v80_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_ground_hvc_wpad_tt_025C_1v80_3v30_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_ground_lvc_wpad_tt_025C_1v80_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_ground_lvc_wpad_tt_100C_1v80_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_power_lvc_wpad_tt_025C_1v80_3v30_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_fd_io__top_xres4v2_tt_tt_025C_1v80_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_ef_io__gpiov2_pad_tt_tt_025C_1v80_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_ef_io__vccd_lvc_clamped_pad_tt_025C_1v80_3v30_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_ef_io__vdda_hvc_clamped_pad_tt_025C_1v80_3v30_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_ef_io__vssa_hvc_clamped_pad_tt_025C_1v80_3v30_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_ef_io__vssd_lvc_clamped3_pad_tt_025C_1v80_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_ef_io__vccd_lvc_clamped3_pad_tt_025C_1v80_3v30_3v30.lib
+ read_liberty $::env(CARAVEL_PDK_ROOT)/libs.ref/sky130_fd_io/lib/sky130_ef_io__vssd_lvc_clamped_pad_tt_025C_1v80_3v30.lib
read_verilog $::env(CARAVEL_ROOT)/mgmt_core_wrapper/verilog/gl/mgmt_core.v
read_verilog $::env(CARAVEL_ROOT)/mgmt_core_wrapper/verilog/gl/DFFRAM.v
read_verilog $::env(CARAVEL_ROOT)/mgmt_core_wrapper/verilog/gl/mgmt_core_wrapper.v
@@ -160,6 +160,7 @@
read_sdc -echo ./sdc/caravel.sdc
+ set_propagated_clock [all_clocks]
check_setup -verbose > unconstraints.rpt
report_checks -path_delay min -fields {slew cap input nets fanout} -format full_clock_expanded -group_count 50
report_checks -path_delay max -fields {slew cap input nets fanout} -format full_clock_expanded -group_count 50
diff --git a/sta/sdc/caravel.sdc b/sta/sdc/caravel.sdc
index 950b657..b4df712 100644
--- a/sta/sdc/caravel.sdc
+++ b/sta/sdc/caravel.sdc
@@ -7,13 +7,17 @@
set ::env(SYNTH_CLOCK_TRANSITION) 0.15
## MASTER CLOCKS
-create_clock [get_ports {"clock"} ] -name "clock" -period 25
+create_clock [get_ports {"clock"} ] -name "master_clock" -period 25
create_clock [get_pins clocking/user_clk ] -name "user_clk2" -period 25
-#create_clock [get_pins housekeeping/_8847_/X ] -name "csclk" -period 25
+create_generated_clock -name csclk -add -source [get_ports {clock}] -master_clock [get_clocks master_clock] -divide_by 1 -invert -comment {csclk} [get_pins housekeeping/_8847_/X]
#create_clock [get_pins clocking/pll_clk ] -name "pll_clk" -period 25
#create_clock [get_pins clocking/pll_clk90 ] -name "pll_clk90" -period 25
+create_clock [get_pins housekeeping/serial_clock ] -name "serial_clock" -period 50
+create_clock [get_pins housekeeping/serial_load ] -name "serial_load" -period 50
-create_generated_clock -name wb_clk -add -source [get_ports {clock}] -master_clock [get_clocks clock] -divide_by 1 -comment {Wishbone User Clock} [get_pins mprj/wb_clk_i]
+
+
+create_generated_clock -name wb_clk -add -source [get_ports {clock}] -master_clock [get_clocks master_clock] -divide_by 1 -comment {Wishbone User Clock} [get_pins mprj/wb_clk_i]
create_clock -name int_pll_clock -period 5.0000 [get_pins {mprj/u_wb_host/u_clkbuf_pll.u_buf/X}]
create_clock -name wbs_ref_clk -period 5.0000 [get_pins {mprj/u_wb_host/u_wbs_ref_clkbuf.u_buf/X}]
@@ -22,13 +26,13 @@
create_clock -name cpu_ref_clk -period 5.0000 [get_pins {mprj/u_wb_host/u_cpu_ref_clkbuf.u_buf/X}]
create_clock -name cpu_clk -period 10.0000 [get_pins {mprj/u_wb_host/cpu_clk}]
-create_clock -name rtc_clk -period 50.0000 [get_pins {mprj/u_wb_host/rtc_clk}]
+create_clock -name rtc_clk -period 50.0000 [get_pins {mprj/u_pinmux/rtc_clk}]
create_clock -name pll_ref_clk -period 20.0000 [get_pins {mprj/u_wb_host/pll_ref_clk}]
create_clock -name pll_clk_0 -period 5.0000 [get_pins {mprj/u_pll/ringosc.ibufp01/Y}]
-create_clock -name usb_ref_clk -period 5.0000 [get_pins {mprj/u_wb_host/u_usb_ref_clkbuf.u_buf/X}]
-create_clock -name usb_clk -period 20.0000 [get_pins {mprj/u_wb_host/usb_clk}]
+create_clock -name usb_ref_clk -period 5.0000 [get_pins {mprj/u_pinmux/u_glbl_reg.u_usb_ref_clkbuf.u_buf/X}]
+create_clock -name usb_clk -period 20.0000 [get_pins {mprj/u_pinmux/usb_clk}]
create_clock -name uarts0_clk -period 100.0000 [get_pins {mprj/u_uart_i2c_usb_spi/u_uart0_core.u_lineclk_buf.genblk1.u_mux/X}]
create_clock -name uarts1_clk -period 100.0000 [get_pins {mprj/u_uart_i2c_usb_spi/u_uart1_core.u_lineclk_buf.genblk1.u_mux/X}]
create_clock -name uartm_clk -period 100.0000 [get_pins {mprj/u_wb_host/u_uart2wb.u_core.u_uart_clk.genblk1.u_mux/X}]
@@ -36,41 +40,41 @@
## Case analysis
+set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_sp_co[3]}]
+set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_sp_co[2]}]
+set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_sp_co[1]}]
+set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_sp_co[0]}]
+
+
+set_case_analysis 1 [get_pins {mprj/u_pinmux/cfg_cska_pinmux[3]}]
+set_case_analysis 0 [get_pins {mprj/u_pinmux/cfg_cska_pinmux[2]}]
+set_case_analysis 0 [get_pins {mprj/u_pinmux/cfg_cska_pinmux[1]}]
+set_case_analysis 0 [get_pins {mprj/u_pinmux/cfg_cska_pinmux[0]}]
+
+set_case_analysis 0 [get_pins {mprj/u_uart_i2c_usb_spi/cfg_cska_uart[3]}]
+set_case_analysis 1 [get_pins {mprj/u_uart_i2c_usb_spi/cfg_cska_uart[2]}]
+set_case_analysis 1 [get_pins {mprj/u_uart_i2c_usb_spi/cfg_cska_uart[1]}]
+set_case_analysis 1 [get_pins {mprj/u_uart_i2c_usb_spi/cfg_cska_uart[0]}]
+
+set_case_analysis 1 [get_pins {mprj/u_qspi_master/cfg_cska_spi[3]}]
+set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_spi[2]}]
+set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_spi[1]}]
+set_case_analysis 1 [get_pins {mprj/u_qspi_master/cfg_cska_spi[0]}]
+
+set_case_analysis 1 [get_pins {mprj/u_riscv_top.u_intf/cfg_cska_riscv[3]}]
+set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_intf/cfg_cska_riscv[2]}]
+set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_intf/cfg_cska_riscv[1]}]
+set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_intf/cfg_cska_riscv[0]}]
+
+set_case_analysis 1 [get_pins {mprj/u_wb_host/cfg_cska_wh[3]}]
+set_case_analysis 0 [get_pins {mprj/u_wb_host/cfg_cska_wh[2]}]
+set_case_analysis 0 [get_pins {mprj/u_wb_host/cfg_cska_wh[1]}]
+set_case_analysis 1 [get_pins {mprj/u_wb_host/cfg_cska_wh[0]}]
+
+set_case_analysis 1 [get_pins {mprj/u_intercon/cfg_cska_wi[3]}]
+set_case_analysis 0 [get_pins {mprj/u_intercon/cfg_cska_wi[2]}]
set_case_analysis 0 [get_pins {mprj/u_intercon/cfg_cska_wi[0]}]
set_case_analysis 0 [get_pins {mprj/u_intercon/cfg_cska_wi[1]}]
-set_case_analysis 0 [get_pins {mprj/u_intercon/cfg_cska_wi[2]}]
-set_case_analysis 1 [get_pins {mprj/u_intercon/cfg_cska_wi[3]}]
-
-set_case_analysis 0 [get_pins {mprj/u_pinmux/cfg_cska_pinmux[0]}]
-set_case_analysis 0 [get_pins {mprj/u_pinmux/cfg_cska_pinmux[1]}]
-set_case_analysis 0 [get_pins {mprj/u_pinmux/cfg_cska_pinmux[2]}]
-set_case_analysis 1 [get_pins {mprj/u_pinmux/cfg_cska_pinmux[3]}]
-
-set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_sp_co[0]}]
-set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_sp_co[1]}]
-set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_sp_co[2]}]
-set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_sp_co[3]}]
-
-set_case_analysis 1 [get_pins {mprj/u_qspi_master/cfg_cska_spi[0]}]
-set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_spi[1]}]
-set_case_analysis 0 [get_pins {mprj/u_qspi_master/cfg_cska_spi[2]}]
-set_case_analysis 1 [get_pins {mprj/u_qspi_master/cfg_cska_spi[3]}]
-
-set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_intf/cfg_cska_riscv[0]}]
-set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_intf/cfg_cska_riscv[1]}]
-set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_intf/cfg_cska_riscv[2]}]
-set_case_analysis 1 [get_pins {mprj/u_riscv_top.u_intf/cfg_cska_riscv[3]}]
-
-set_case_analysis 1 [get_pins {mprj/u_wb_host/cfg_cska_wh[0]}]
-set_case_analysis 0 [get_pins {mprj/u_wb_host/cfg_cska_wh[1]}]
-set_case_analysis 0 [get_pins {mprj/u_wb_host/cfg_cska_wh[2]}]
-set_case_analysis 1 [get_pins {mprj/u_wb_host/cfg_cska_wh[3]}]
-
-set_case_analysis 1 [get_pins {mprj/u_uart_i2c_usb_spi/cfg_cska_uart[0]}]
-set_case_analysis 1 [get_pins {mprj/u_uart_i2c_usb_spi/cfg_cska_uart[1]}]
-set_case_analysis 1 [get_pins {mprj/u_uart_i2c_usb_spi/cfg_cska_uart[2]}]
-set_case_analysis 0 [get_pins {mprj/u_uart_i2c_usb_spi/cfg_cska_uart[3]}]
-
#Keept the SRAM clock driving edge at pos edge
set_case_analysis 0 [get_pins {mprj/u_riscv_top.u_intf/cfg_sram_lphase[0]}]
@@ -84,8 +88,13 @@
set_propagated_clock [all_clocks]
+#set_multicycle_path -setup -from [get_clocks {master_clock}] -to [get_clocks {csclk}] 2
+#set_multicycle_path -hold -from [get_clocks {master_clock}] -to [get_clocks {csclk}] 2
+
set_clock_groups -name async_clock -asynchronous \
- -group [get_clocks {clock wb_clk }]\
+ -group [get_clocks {wb_clk master_clock}]\
+ -group [get_clocks {csclk}]\
+ -group [get_clocks {serial_clock serial_load }]\
-group [get_clocks {user_clk2}]\
-group [get_clocks {int_pll_clock}]\
-group [get_clocks {wbs_clk_i}]\
@@ -108,50 +117,50 @@
puts "\[INFO\]: Setting output delay to: $output_delay_value"
puts "\[INFO\]: Setting input delay to: $input_delay_value"
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {gpio}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[0]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[1]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[2]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[3]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[4]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[5]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[6]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[7]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[8]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[9]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[10]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[11]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[12]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[13]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[14]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[15]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[16]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[17]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[18]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[19]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[20]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[21]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[22]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[23]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[24]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[25]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[26]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[27]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[28]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[29]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[30]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[31]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[32]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[33]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[34]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[35]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[36]}]
-set_input_delay $input_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {mprj_io[37]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {gpio}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[0]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[1]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[2]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[3]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[4]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[5]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[6]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[7]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[8]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[9]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[10]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[11]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[12]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[13]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[14]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[15]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[16]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[17]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[18]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[19]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[20]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[21]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[22]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[23]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[24]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[25]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[26]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[27]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[28]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[29]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[30]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[31]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[32]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[33]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[34]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[35]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[36]}]
+set_input_delay $input_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {mprj_io[37]}]
-set_output_delay $output_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {flash_csb}]
-set_output_delay $output_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {flash_clk}]
-set_output_delay $output_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {flash_io0}]
-set_output_delay $output_delay_value -clock [get_clocks {clock}] -add_delay [get_ports {flash_io1}]
+set_output_delay $output_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {flash_csb}]
+set_output_delay $output_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {flash_clk}]
+set_output_delay $output_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {flash_io0}]
+set_output_delay $output_delay_value -clock [get_clocks {master_clock}] -add_delay [get_ports {flash_io1}]
set_max_fanout $::env(SYNTH_MAX_FANOUT) [current_design]
@@ -265,4 +274,4 @@
puts "\[INFO\]: Setting clock transition to: $::env(SYNTH_CLOCK_TRANSITION)"
-set_clock_transition $::env(SYNTH_CLOCK_TRANSITION) [get_clocks {clock}]
+set_clock_transition $::env(SYNTH_CLOCK_TRANSITION) [get_clocks {master_clock}]
diff --git a/verilog/dv/agents/uart_agent.v b/verilog/dv/agents/uart_agent.v
index c9f11b4..5ca1813 100644
--- a/verilog/dv/agents/uart_agent.v
+++ b/verilog/dv/agents/uart_agent.v
@@ -41,6 +41,7 @@
reg [15:0] stop_err2_cnt;
reg [15:0] timeout_err_cnt;
reg [15:0] err_cnt;
+reg uart_rxenb; // uart rx enable
reg txd, read, write;
wire uart_rx_clk;
@@ -56,6 +57,7 @@
initial
begin
+ uart_rxenb = 0;
debug_mode = 1; // Keep in debug mode and enable display
txd = 1'b1;
uart_clk = 0;
@@ -77,9 +79,16 @@
always @(posedge mclk)
begin
- timeout_count = timeout_count + 1;
- if (timeout_count == (control_setup.maxtime * 16))
- -> abort;
+ if(uart_rxenb) begin
+ timeout_count = timeout_count + 1;
+ if (timeout_count >= (control_setup.maxtime * 16)) begin
+ timeout_count = 0;
+ uart_rxenb = 0;
+ -> abort;
+ end
+ end else begin
+ timeout_count = 0;
+ end
end
always @uart_read_done
@@ -118,6 +127,7 @@
////////////////////////////////////////////////////////////////////////////////
task uart_init;
begin
+ uart_rxenb = 0;
read = 0;
write = 0;
tx_count = 0;
@@ -144,9 +154,10 @@
reg parity;
begin
- data <= 8'h0;
- parity <= 1;
+ data = 8'h0;
+ parity = 1;
timeout_count = 0;
+ uart_rxenb = 1;
fork
begin : loop_1
@@ -162,15 +173,15 @@
// start cycle
@(negedge rxd)
disable loop_1;
- read <= 1;
+ read = 1;
// data cycle
@(posedge uart_rx_clk);
for (i = 0; i < data_bit_number; i = i + 1)
begin
@(posedge uart_rx_clk)
- data[i] <= rxd;
- parity <= parity ^ rxd;
+ data[i] = rxd;
+ parity = parity ^ rxd;
end
// parity cycle
@@ -207,7 +218,7 @@
end
end
- read <= 0;
+ read = 0;
-> uart_read_done;
if (expected_data != data)
@@ -224,6 +235,7 @@
$display ("%m:... Read Data from UART done cnt :%d...",rx_count +1);
end
join
+ uart_rxenb = 0;
end
@@ -233,16 +245,17 @@
task read_char2;
output [7:0] rxd_data;
output timeout; // 1-> timeout
-integer i;
+integer j;
reg [7:0] rxd_data;
reg [7:0] data;
reg parity;
begin
- data <= 8'h0;
- parity <= 1;
+ data = 8'h0;
+ parity = 1;
timeout_count = 0;
timeout = 0;
+ uart_rxenb = 1;
fork
begin
@@ -256,15 +269,15 @@
// start cycle
@(negedge rxd)
- read <= 1;
+ read = 1;
// data cycle
@(posedge uart_rx_clk );
- for (i = 0; i < data_bit_number; i = i + 1)
+ for (j = 0; j < data_bit_number; j = j + 1)
begin
@(posedge uart_rx_clk)
- data[i] <= rxd;
- parity <= parity ^ rxd;
+ data[j] = rxd;
+ parity = parity ^ rxd;
end
// parity cycle
@@ -301,7 +314,7 @@
end
end
- read <= 0;
+ read = 0;
-> uart_read_done;
// $display ("(%m) Received Data %c", data);
@@ -312,6 +325,7 @@
join_any
disable fork; //disable pending fork activity
+ uart_rxenb = 0;
end
endtask
@@ -331,10 +345,11 @@
reg parity;
begin
- data <= 8'h0;
- parity <= 1;
+ data = 8'h0;
+ parity = 1;
timeout_count = 0;
timeout = 0;
+ uart_rxenb = 1;
fork
@@ -352,15 +367,15 @@
// start cycle
@(negedge rxd)
disable loop_1;
- read <= 1;
+ read = 1;
// data cycle
@(posedge uart_rx_clk);
for (i = 0; i < data_bit_number; i = i + 1)
begin
@(posedge uart_rx_clk)
- data[i] <= rxd;
- parity <= parity ^ rxd;
+ data[i] = rxd;
+ parity = parity ^ rxd;
end
// parity cycle
@@ -397,7 +412,7 @@
end
end
- read <= 0;
+ read = 0;
-> uart_read_done;
rxd_data = data;
@@ -409,6 +424,7 @@
end
end
join
+ uart_rxenb = 0;
end
@@ -424,8 +440,9 @@
reg parity;
begin
- data <= 8'h0;
- parity <= 1;
+ data = 8'h0;
+ parity = 1;
+ uart_rxenb = 1;
fork
@@ -433,15 +450,15 @@
// start cycle
@(negedge rxd)
- read <= 1;
+ read = 1;
// data cycle
@(posedge uart_rx_clk);
for (i = 0; i < data_bit_number; i = i + 1)
begin
@(posedge uart_rx_clk)
- data[i] <= rxd;
- parity <= parity ^ rxd;
+ data[i] = rxd;
+ parity = parity ^ rxd;
end
// parity cycle
@@ -478,12 +495,13 @@
end
end
- read <= 0;
+ read = 0;
-> uart_read_done;
rxd_data = data;
end
join
+ uart_rxenb = 0;
end
@@ -497,13 +515,13 @@
reg parity; // 0: odd parity, 1: even parity
begin
- parity <= #1 1;
+ parity = #1 1;
// start cycle
@(posedge uart_clk)
begin
- txd <= #1 0;
- write <= #1 1;
+ txd = #1 0;
+ write = #1 1;
end
// data cycle
@@ -511,8 +529,8 @@
for (i = 0; i < data_bit_number; i = i + 1)
begin
@(posedge uart_clk)
- txd <= #1 data[i];
- parity <= parity ^ data[i];
+ txd = #1 data[i];
+ parity = parity ^ data[i];
end
end
@@ -520,24 +538,24 @@
if (control_setup.parity_en)
begin
@(posedge uart_clk)
- txd <= #1
+ txd = #1
// control_setup.stick_parity ? ~control_setup.even_odd_parity :
control_setup.even_odd_parity ? !parity : parity;
end
// stop cycle 1
@(posedge uart_clk)
- txd <= #1 stop_err_check ? 0 : 1;
+ txd = #1 stop_err_check ? 0 : 1;
// stop cycle 2
@(posedge uart_clk);
- txd <= #1 1;
+ txd = #1 1;
if (data_bit_number == 5)
@(negedge uart_clk);
else if (control_setup.stop_bit_number)
@(posedge uart_clk);
- write <= #1 0;
+ write = #1 0;
if(debug_mode)
$display ("%m:... Write data %h to UART done cnt : %d ...\n", data,tx_count+1);
else
diff --git a/verilog/dv/agents/uart_master_tasks.sv b/verilog/dv/agents/uart_master_tasks.sv
index f0a1a7d..cd0af94 100644
--- a/verilog/dv/agents/uart_master_tasks.sv
+++ b/verilog/dv/agents/uart_master_tasks.sv
@@ -5,8 +5,6 @@
reg [7:0] read_data;
reg flag;
begin
- fork
- begin : loop_1
tb_master_uart.write_char("w");
tb_master_uart.write_char("m");
tb_master_uart.write_char(" ");
@@ -28,17 +26,13 @@
tb_master_uart.write_char(hex2char(data[7:4]));
tb_master_uart.write_char(hex2char(data[3:0]));
tb_master_uart.write_char("\n");
- end
- begin : loop_2
// Wait for sucess command
flag = 0;
while(flag == 0)
begin
tb_master_uart.read_char2(read_data,flag);
- //$write ("%c",read_data);
+ //$write ("%c",read_data);
end
- end
- join
end
endtask
@@ -49,28 +43,24 @@
reg flag;
integer i;
begin
- fork
- begin : loop_1
- tb_master_uart.write_char("r");
- tb_master_uart.write_char("m");
- tb_master_uart.write_char(" ");
- tb_master_uart.write_char(hex2char(addr[31:28]));
- tb_master_uart.write_char(hex2char(addr[27:24]));
- tb_master_uart.write_char(hex2char(addr[23:20]));
- tb_master_uart.write_char(hex2char(addr[19:16]));
- tb_master_uart.write_char(hex2char(addr[15:12]));
- tb_master_uart.write_char(hex2char(addr[11:8]));
- tb_master_uart.write_char(hex2char(addr[7:4]));
- tb_master_uart.write_char(hex2char(addr[3:0]));
- tb_master_uart.write_char("\n");
- end
- begin : loop_2
- // Wait for sucess command
- flag = 0;
- i = 0;
- while(flag == 0)
- begin
- tb_master_uart.read_char2(read_data,flag);
+ tb_master_uart.write_char("r");
+ tb_master_uart.write_char("m");
+ tb_master_uart.write_char(" ");
+ tb_master_uart.write_char(hex2char(addr[31:28]));
+ tb_master_uart.write_char(hex2char(addr[27:24]));
+ tb_master_uart.write_char(hex2char(addr[23:20]));
+ tb_master_uart.write_char(hex2char(addr[19:16]));
+ tb_master_uart.write_char(hex2char(addr[15:12]));
+ tb_master_uart.write_char(hex2char(addr[11:8]));
+ tb_master_uart.write_char(hex2char(addr[7:4]));
+ tb_master_uart.write_char(hex2char(addr[3:0]));
+ tb_master_uart.write_char("\n");
+ // Wait for sucess command
+ flag = 0;
+ i = 0;
+ while(flag == 0)
+ begin
+ tb_master_uart.read_char2(read_data,flag);
//$write ("%d:%c",i,read_data);
case (i)
8'd10 : data[31:28] = char2hex(read_data);
@@ -81,12 +71,10 @@
8'd15 : data[11:8] = char2hex(read_data);
8'd16 : data[7:4] = char2hex(read_data);
8'd17 : data[3:0] = char2hex(read_data);
- endcase
- i = i+1;
- end
- end
- join
+ endcase
+ i = i+1;
$display("received Data: %x",data);
+ end
end
endtask
@@ -99,43 +87,37 @@
reg flag;
integer i;
begin
- fork
- begin : loop_1
- tb_master_uart.write_char("r");
- tb_master_uart.write_char("m");
- tb_master_uart.write_char(" ");
- tb_master_uart.write_char(hex2char(addr[31:28]));
- tb_master_uart.write_char(hex2char(addr[27:24]));
- tb_master_uart.write_char(hex2char(addr[23:20]));
- tb_master_uart.write_char(hex2char(addr[19:16]));
- tb_master_uart.write_char(hex2char(addr[15:12]));
- tb_master_uart.write_char(hex2char(addr[11:8]));
- tb_master_uart.write_char(hex2char(addr[7:4]));
- tb_master_uart.write_char(hex2char(addr[3:0]));
- tb_master_uart.write_char("\n");
+ tb_master_uart.write_char("r");
+ tb_master_uart.write_char("m");
+ tb_master_uart.write_char(" ");
+ tb_master_uart.write_char(hex2char(addr[31:28]));
+ tb_master_uart.write_char(hex2char(addr[27:24]));
+ tb_master_uart.write_char(hex2char(addr[23:20]));
+ tb_master_uart.write_char(hex2char(addr[19:16]));
+ tb_master_uart.write_char(hex2char(addr[15:12]));
+ tb_master_uart.write_char(hex2char(addr[11:8]));
+ tb_master_uart.write_char(hex2char(addr[7:4]));
+ tb_master_uart.write_char(hex2char(addr[3:0]));
+ tb_master_uart.write_char("\n");
+ // Wait for sucess command
+ flag = 0;
+ i = 0;
+ while(flag == 0)
+ begin
+ tb_master_uart.read_char2(read_data,flag);
+ //$write ("%d:%c",i,read_data);
+ case (i)
+ 8'd10 : rxd_data[31:28] = char2hex(read_data);
+ 8'd11 : rxd_data[27:24] = char2hex(read_data);
+ 8'd12 : rxd_data[23:20] = char2hex(read_data);
+ 8'd13 : rxd_data[19:16] = char2hex(read_data);
+ 8'd14 : rxd_data[15:12] = char2hex(read_data);
+ 8'd15 : rxd_data[11:8] = char2hex(read_data);
+ 8'd16 : rxd_data[7:4] = char2hex(read_data);
+ 8'd17 : rxd_data[3:0] = char2hex(read_data);
+ endcase
+ i = i+1;
end
- begin : loop_2
- // Wait for sucess command
- flag = 0;
- i = 0;
- while(flag == 0)
- begin
- tb_master_uart.read_char2(read_data,flag);
- //$write ("%d:%c",i,read_data);
- case (i)
- 8'd10 : rxd_data[31:28] = char2hex(read_data);
- 8'd11 : rxd_data[27:24] = char2hex(read_data);
- 8'd12 : rxd_data[23:20] = char2hex(read_data);
- 8'd13 : rxd_data[19:16] = char2hex(read_data);
- 8'd14 : rxd_data[15:12] = char2hex(read_data);
- 8'd15 : rxd_data[11:8] = char2hex(read_data);
- 8'd16 : rxd_data[7:4] = char2hex(read_data);
- 8'd17 : rxd_data[3:0] = char2hex(read_data);
- endcase
- i = i+1;
- end
- end
- join
if(rxd_data == exp_data) begin
// $display("STATUS: ADDRESS: %x RXD: %x", addr,rxd_data);
end else begin
diff --git a/verilog/dv/agents/user_tasks.sv b/verilog/dv/agents/user_tasks.sv
new file mode 100644
index 0000000..a2c16ab
--- /dev/null
+++ b/verilog/dv/agents/user_tasks.sv
@@ -0,0 +1,143 @@
+
+/********************
+parameter bit [15:0] PAD_STRAP = (2'b00 << `PSTRAP_CLK_SRC ) |
+ (2'b00 << `PSTRAP_CLK_DIV ) |
+ (1'b1 << `PSTRAP_UARTM_CFG ) |
+ (1'b1 << `PSTRAP_QSPI_SRAM ) |
+ (2'b10 << `PSTRAP_QSPI_FLASH ) |
+ (1'b1 << `PSTRAP_RISCV_RESET_MODE ) |
+ (1'b1 << `PSTRAP_RISCV_CACHE_BYPASS ) |
+ (1'b1 << `PSTRAP_RISCV_SRAM_CLK_EDGE ) |
+ (2'b00 << `PSTRAP_CLK_SKEW ) |
+ (1'b0 << `PSTRAP_DEFAULT_VALUE ) ;
+****/
+
+`ifdef RISC_BOOT // RISCV Based Test case
+parameter bit [15:0] PAD_STRAP = 16'b0000_0001_1011_0000;
+`else
+parameter bit [15:0] PAD_STRAP = 16'b0000_0000_1011_0000;
+`endif
+
+/***********************************************
+
+wire [15:0] strap_in;
+assign strap_in[`PSTRAP_CLK_SRC] = 2'b00; // System Clock Source wbs/riscv: User clock1
+assign strap_in[`PSTRAP_CLK_DIV] = 2'b00; // Clock Division for wbs/riscv : 0 Div
+assign strap_in[`PSTRAP_UARTM_CFG] = 1'b0; // uart master config control - constant value based on system clock selection
+assign strap_in[`PSTRAP_QSPI_SRAM] = 1'b1; // QSPI SRAM Mode Selection - Quad
+assign strap_in[`PSTRAP_QSPI_FLASH] = 2'b10; // QSPI Fash Mode Selection - Quad
+assign strap_in[`PSTRAP_RISCV_RESET_MODE] = 1'b1; // Riscv Reset control - Removed Riscv on Power On Reset
+assign strap_in[`PSTRAP_RISCV_CACHE_BYPASS] = 1'b0; // Riscv Cache Bypass: 0 - Cache Enable
+assign strap_in[`PSTRAP_RISCV_SRAM_CLK_EDGE] = 1'b0; // Riscv SRAM clock edge selection: 0 - Normal
+assign strap_in[`PSTRAP_CLK_SKEW] = 2'b00; // Skew selection 2'b00 - Default value
+
+assign strap_in[`PSTRAP_DEFAULT_VALUE] = 1'b0; // 0 - Normal
+***/
+
+initial
+begin
+ // Run in Fast Sim Mode
+ `ifdef GL
+ force u_top.u_wb_host._8654_.Q= 1'b1;
+ `else
+ force u_top.u_wb_host.u_fastsim_buf.X = 1'b1;
+ `endif
+
+end
+task init;
+begin
+ //#1 - Apply Reset
+ #1000 wb_rst_i = 0;
+ repeat (10) @(posedge clock);
+ #1000 wb_rst_i = 1;
+
+ //#3 - Remove Reset
+ #1000 wb_rst_i = 0;
+ repeat (10) @(posedge clock);
+ //#4 - Wait for Power on reset removal
+ wait(u_top.p_reset_n == 1);
+
+ // #5 - Wait for system reset removal
+ wait(u_top.s_reset_n == 1); // Wait for system reset removal
+ repeat (10) @(posedge clock);
+
+/****
+ //#2 - Apply Strap
+ strap_in[`PSTRAP_CLK_SRC] = 2'b00; // System Clock Source wbs/riscv: User clock1
+ strap_in[`PSTRAP_CLK_DIV] = 2'b00; // Clock Division for wbs/riscv : 0 Div
+ strap_in[`PSTRAP_UARTM_CFG] = 1'b0; // uart master config control - constant value based on system clock selection
+ strap_in[`PSTRAP_QSPI_SRAM] = 1'b1; // QSPI SRAM Mode Selection - Quad
+ strap_in[`PSTRAP_QSPI_FLASH] = 2'b10; // QSPI Fash Mode Selection - Quad
+ strap_in[`PSTRAP_RISCV_RESET_MODE] = 1'b1; // Riscv Reset control - Removed Riscv on Power On Reset
+ strap_in[`PSTRAP_RISCV_CACHE_BYPASS] = 1'b0; // Riscv Cache Bypass: 0 - Cache Enable
+ strap_in[`PSTRAP_RISCV_SRAM_CLK_EDGE] = 1'b0; // Riscv SRAM clock edge selection: 0 - Normal
+ strap_in[`PSTRAP_CLK_SKEW] = 2'b00; // Skew selection 2'b00 - Default value
+
+ strap_in[`PSTRAP_DEFAULT_VALUE] = 1'b0; // 0 - Normal
+
+ force u_top.io_in[36:29] = strap_in[15:8];
+ force u_top.io_in[20:13] = strap_in[7:0];
+ repeat (10) @(posedge clock);
+
+ //#3 - Remove Reset
+ wb_rst_i = 0; // Remove Reset
+ repeat (10) @(posedge clock);
+ //#4 - Wait for Power on reset removal
+ wait(u_top.p_reset_n == 1);
+
+ // #5 - Release the Strap
+ release u_top.io_in[36:29];
+ release u_top.io_in[20:13];
+
+ // #6 - Wait for system reset removal
+ wait(u_top.s_reset_n == 1); // Wait for system reset removal
+ repeat (10) @(posedge clock);
+
+***/
+ end
+endtask
+
+genvar gCnt;
+generate
+ for(gCnt=0; gCnt<16; gCnt++) begin : g_strap
+ if(gCnt < 8) begin
+ if(PAD_STRAP[gCnt]) begin
+ pullup(io_in[13+gCnt]);
+ end else begin
+ pulldown(io_in[13+gCnt]);
+ end
+ end else begin
+ if(PAD_STRAP[gCnt]) begin
+ pullup(io_in[29+gCnt-8]);
+ end else begin
+ pulldown(io_in[29+gCnt-8]);
+ end
+ end
+ end
+
+`ifdef RISC_BOOT // RISCV Based Test case
+//-------------------------------------------
+task wait_riscv_boot;
+begin
+ // GLBL_CFG_MAIL_BOX used as mail box, each core update boot up handshake at 8 bit
+ // bit[7:0] - core-0
+ // bit[15:8] - core-1
+ // bit[23:16] - core-2
+ // bit[31:24] - core-3
+ $display("Status: Waiting for RISCV Core Boot ... ");
+ read_data = 0;
+ while((read_data >> (d_risc_id*8)) != 8'h1) begin
+ wb_user_core_read(`ADDR_SPACE_GLBL+`GLBL_CFG_MAIL_BOX,read_data);
+ repeat (1000) @(posedge clock);
+ end
+
+ $display("Status: RISCV Core is Booted ");
+
+end
+endtask
+
+`endif
+
+
+endgenerate
+
diff --git a/verilog/dv/arduino_arrays/Makefile b/verilog/dv/arduino_arrays/Makefile
index dad099c..0e61c01 100644
--- a/verilog/dv/arduino_arrays/Makefile
+++ b/verilog/dv/arduino_arrays/Makefile
@@ -97,31 +97,31 @@
${GCC_PREFIX}-ar rcs core.a wiring_digital.c.o
${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
- ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.ino.elf
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.ino.elf ${PATTERN}.ino.bin
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.ino.elf ${PATTERN}.ino.hex
- ${GCC_PREFIX}-objdump -D ${PATTERN}.ino.elf > ${PATTERN}.ino.dump
+ ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.elf
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.elf ${PATTERN}.bin
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.elf ${PATTERN}.hex
+ ${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
rm *.o *.a
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
- iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
$< -o $@
else
- iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DRISC_BOOT -DSIM -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
$< -o $@
endif
else
ifeq ($(DUMP),OFF)
- iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
else
- iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
diff --git a/verilog/dv/arduino_arrays/arduino_arrays_tb.v b/verilog/dv/arduino_arrays/arduino_arrays_tb.v
index 169337d..8f8b4ae 100644
--- a/verilog/dv/arduino_arrays/arduino_arrays_tb.v
+++ b/verilog/dv/arduino_arrays/arduino_arrays_tb.v
@@ -69,8 +69,11 @@
`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
`include "is62wvs1288.v"
+`include "user_params.svh"
-module arduino_arrays_tb;
+`define TB_HEX "arduino_arrays.hex"
+`define TB_TOP arduino_arrays_tb
+module `TB_TOP;
reg clock;
reg wb_rst_i;
reg power1, power2;
@@ -150,63 +153,66 @@
`ifdef WFDUMP
initial begin
$dumpfile("simx.vcd");
- $dumpvars(3, arduino_arrays_tb);
- //$dumpvars(0, arduino_arrays_tb.u_top.u_riscv_top.i_core_top_0);
- //$dumpvars(0, arduino_arrays_tb.u_top.u_riscv_top.u_connect);
- //$dumpvars(0, arduino_arrays_tb.u_top.u_riscv_top.u_intf);
- $dumpvars(0, arduino_arrays_tb.u_top.u_pinmux);
+ $dumpvars(3, `TB_TOP);
+ //$dumpvars(0, `TB_TOP.u_top.u_riscv_top.i_core_top_0);
+ //$dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_connect);
+ //$dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_intf);
+ $dumpvars(0, `TB_TOP.u_top.u_pinmux);
end
`endif
/************* Port-D Mapping **********************************
* Arduino-No
- * Pin-2 0 PD0/RXD[0] digital_io[1]
- * Pin-3 1 PD1/TXD[0] digital_io[2]
- * Pin-4 2 PD2/RXD[1]/INT0 digital_io[3]
- * Pin-5 3 PD3/INT1/OC2B(PWM0) digital_io[4]
- * Pin-6 4 PD4/TXD[1] digital_io[5]
- * Pin-11 5 PD5/SS[3]/OC0B(PWM1)/T1 digital_io[8]
- * Pin-12 6 PD6/SS[2]/OC0A(PWM2)/AIN0 digital_io[9]/analog_io[2]
- * Pin-13 7 PD7/A1N1 digital_io[10]/analog_io[3]
+ * Pin-2 0 PD0/RXD[0] digital_io[6]
+ * Pin-3 1 PD1/TXD[0] digital_io[7]
+ * Pin-4 2 PD2/RXD[1]/INT0 digital_io[8]
+ * Pin-5 3 PD3/INT1/OC2B(PWM0) digital_io[9]
+ * Pin-6 4 PD4/TXD[1] digital_io[10]
+ * Pin-11 5 PD5/SS[3]/OC0B(PWM1)/T1 digital_io[13]
+ * Pin-12 6 PD6/SS[2]/OC0A(PWM2)/AIN0 digital_io[14]/analog_io[2]
+ * Pin-13 7 PD7/A1N1 digital_io[15]/analog_io[3]
* ********************************************************/
- wire [7:0] port_d_in = { io_out[10],
- io_out[9],
- io_out[8],
- io_out[5],
- io_out[4],
- io_out[3],
- io_out[2],
- io_out[1]
+ wire [7:0] port_d_in = { io_out[15],
+ io_out[14],
+ io_out[13],
+ io_out[10],
+ io_out[9],
+ io_out[8],
+ io_out[7],
+ io_out[6]
};
initial begin
+ $value$plusargs("risc_core_id=%d", d_risc_id);
#200; // Wait for reset removal
repeat (10) @(posedge clock);
$display("Monitor: Standalone User Risc Boot Test Started");
+
+ init();
+ wait_riscv_boot();
- $value$plusargs("risc_core_id=%d", d_risc_id);
// Remove Wb Reset
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+ //wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
repeat (2) @(posedge clock);
#1;
// Remove WB and SPI Reset and CORE under Reset
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h01F);
+ //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h01F);
// QSPI SRAM:CS#2 Switch to QSPI Mode
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h1000); // Change the Bank Sel 1000
- wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_CTRL1,{16'h0,1'b0,1'b0,4'b0000,P_MODE_SWITCH_IDLE,P_SINGLE,P_SINGLE,4'b0100});
- wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_CTRL2,{8'h0,2'b00,2'b00,P_FSM_C,8'h00,8'h38});
- wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_WDATA,32'h0);
+ //wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h1000); // Change the Bank Sel 1000
+ //wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_CTRL1,{16'h0,1'b0,1'b0,4'b0000,P_MODE_SWITCH_IDLE,P_SINGLE,P_SINGLE,4'b0100});
+ //wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_CTRL2,{8'h0,2'b00,2'b00,P_FSM_C,8'h00,8'h38});
+ //wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_WDATA,32'h0);
// Remove all the reset
if(d_risc_id == 0) begin
$display("STATUS: Working with Risc core 0");
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+ //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
end else if(d_risc_id == 1) begin
$display("STATUS: Working with Risc core 1");
wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
@@ -248,7 +254,7 @@
test_fail = 0;
end
begin
- repeat (30000) @(posedge clock); // wait for Processor Get Ready
+ repeat (40000) @(posedge clock); // wait for Processor Get Ready
test_fail = 1;
end
join_any
@@ -275,11 +281,6 @@
$finish;
end
- initial begin
- wb_rst_i <= 1'b1;
- #100;
- wb_rst_i <= 1'b0; // Release reset
- end
wire USER_VDD1V8 = 1'b1;
wire VSS = 1'b0;
@@ -318,6 +319,10 @@
);
+// SSPI Slave I/F
+assign io_in[5] = 1'b1; // RESET
+assign io_in[21] = 1'b0; // CLOCK
+
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
initial begin
@@ -330,25 +335,25 @@
// user core using the gpio pads
// ----------------------------------------------------
- wire flash_clk = io_out[24];
- wire flash_csb = io_out[25];
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
// Creating Pad Delay
- wire #1 io_oeb_29 = io_oeb[29];
- wire #1 io_oeb_30 = io_oeb[30];
- wire #1 io_oeb_31 = io_oeb[31];
- wire #1 io_oeb_32 = io_oeb[32];
- tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
- tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
- tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
- tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
- assign io_in[29] = flash_io0;
- assign io_in[30] = flash_io1;
- assign io_in[31] = flash_io2;
- assign io_in[32] = flash_io3;
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
// Quard flash
- s25fl256s #(.mem_file_name("arduino_arrays.ino.hex"),
+ s25fl256s #(.mem_file_name(`TB_HEX),
.otp_file_name("none"),
.TimingModel("S25FL512SAGMFI010_F_30pF"))
u_spi_flash_256mb (
@@ -364,7 +369,7 @@
);
- wire spiram_csb = io_out[27];
+ wire spiram_csb = io_out[31];
is62wvs1288 #(.mem_file_name("none"))
u_sram (
@@ -521,6 +526,7 @@
`endif
**/
+`include "user_tasks.sv"
endmodule
`include "s25fl256s.sv"
`default_nettype wire
diff --git a/verilog/dv/arduino_ascii_table/Makefile b/verilog/dv/arduino_ascii_table/Makefile
index 30b4cfe..38987f6 100644
--- a/verilog/dv/arduino_ascii_table/Makefile
+++ b/verilog/dv/arduino_ascii_table/Makefile
@@ -97,10 +97,10 @@
${GCC_PREFIX}-ar rcs core.a wiring_digital.c.o
${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
- ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.ino.elf
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.ino.elf ${PATTERN}.ino.bin
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.ino.elf ${PATTERN}.ino.hex
- ${GCC_PREFIX}-objdump -D ${PATTERN}.ino.elf > ${PATTERN}.ino.dump
+ ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.elf
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.elf ${PATTERN}.bin
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.elf ${PATTERN}.hex
+ ${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
rm *.o *.a
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
diff --git a/verilog/dv/arduino_ascii_table/arduino_ascii_table_tb.v b/verilog/dv/arduino_ascii_table/arduino_ascii_table_tb.v
index e6fa954..0927816 100644
--- a/verilog/dv/arduino_ascii_table/arduino_ascii_table_tb.v
+++ b/verilog/dv/arduino_ascii_table/arduino_ascii_table_tb.v
@@ -68,9 +68,12 @@
`timescale 1 ns / 1 ns
`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
+`include "is62wvs1288.v"
`include "uart_agent.v"
-module arduino_ascii_table_tb;
+`define TB_HEX "arduino_ascii_table.hex"
+`define TB_TOP arduino_ascii_table_tb
+module `TB_TOP;
reg clock;
reg wb_rst_i;
reg power1, power2;
@@ -142,11 +145,11 @@
`ifdef WFDUMP
initial begin
$dumpfile("simx.vcd");
- $dumpvars(3, arduino_ascii_table_tb);
- $dumpvars(0, arduino_ascii_table_tb.u_top.u_riscv_top.i_core_top_0);
- $dumpvars(0, arduino_ascii_table_tb.u_top.u_riscv_top.u_connect);
- $dumpvars(0, arduino_ascii_table_tb.u_top.u_riscv_top.u_intf);
- $dumpvars(0, arduino_ascii_table_tb.u_top.u_uart_i2c_usb_spi.u_uart0_core);
+ $dumpvars(3, `TB_TOP);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top.i_core_top_0);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_connect);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_intf);
+ $dumpvars(0, `TB_TOP.u_top.u_uart_i2c_usb_spi.u_uart0_core);
end
`endif
@@ -316,6 +319,9 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
+assign io_in[16] = 1'b0 ; // SPIS SCK
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
@@ -329,25 +335,25 @@
// user core using the gpio pads
// ----------------------------------------------------
- wire flash_clk = io_out[24];
- wire flash_csb = io_out[25];
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
// Creating Pad Delay
- wire #1 io_oeb_29 = io_oeb[29];
- wire #1 io_oeb_30 = io_oeb[30];
- wire #1 io_oeb_31 = io_oeb[31];
- wire #1 io_oeb_32 = io_oeb[32];
- tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
- tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
- tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
- tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
- assign io_in[29] = flash_io0;
- assign io_in[30] = flash_io1;
- assign io_in[31] = flash_io2;
- assign io_in[32] = flash_io3;
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
// Quard flash
- s25fl256s #(.mem_file_name("arduino_ascii_table.ino.hex"),
+ s25fl256s #(.mem_file_name(`TB_HEX),
.otp_file_name("none"),
.TimingModel("S25FL512SAGMFI010_F_30pF"))
u_spi_flash_256mb (
@@ -363,14 +369,27 @@
);
+ wire spiram_csb = io_out[31];
+
+ is62wvs1288 #(.mem_file_name("none"))
+ u_sram (
+ // Data Inputs/Outputs
+ .io0 (flash_io0),
+ .io1 (flash_io1),
+ // Controls
+ .clk (flash_clk),
+ .csb (spiram_csb),
+ .io2 (flash_io2),
+ .io3 (flash_io3)
+ );
//---------------------------
// UART Agent integration
// --------------------------
wire uart_txd,uart_rxd;
-assign uart_txd = io_out[2];
-assign io_in[1] = uart_rxd ;
+assign uart_txd = io_out[7];
+assign io_in[6] = uart_rxd ;
uart_agent tb_uart(
.mclk (clock ),
diff --git a/verilog/dv/arduino_character_analysis/Makefile b/verilog/dv/arduino_character_analysis/Makefile
index 9293db4..b50000c 100644
--- a/verilog/dv/arduino_character_analysis/Makefile
+++ b/verilog/dv/arduino_character_analysis/Makefile
@@ -97,31 +97,31 @@
${GCC_PREFIX}-ar rcs core.a wiring_digital.c.o
${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
- ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.ino.elf
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.ino.elf ${PATTERN}.ino.bin
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.ino.elf ${PATTERN}.ino.hex
- ${GCC_PREFIX}-objdump -D ${PATTERN}.ino.elf > ${PATTERN}.ino.dump
+ ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.elf
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.elf ${PATTERN}.bin
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.elf ${PATTERN}.hex
+ ${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
rm *.o *.a
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
- iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
$< -o $@
else
- iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DRISC_BOOT -DSIM -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
$< -o $@
endif
else
ifeq ($(DUMP),OFF)
- iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
else
- iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
diff --git a/verilog/dv/arduino_character_analysis/arduino_character_analysis_tb.v b/verilog/dv/arduino_character_analysis/arduino_character_analysis_tb.v
index af8c31f..699f433 100644
--- a/verilog/dv/arduino_character_analysis/arduino_character_analysis_tb.v
+++ b/verilog/dv/arduino_character_analysis/arduino_character_analysis_tb.v
@@ -70,8 +70,11 @@
`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
`include "uart_agent.v"
`include "is62wvs1288.v"
+`include "user_params.svh"
-module arduino_character_analysis;
+`define TB_HEX "arduino_character_analysis.hex"
+`define TB_TOP arduino_character_analysis_tb
+module `TB_TOP;
reg clock;
reg wb_rst_i;
reg power1, power2;
@@ -115,11 +118,12 @@
reg [15:0] uart_tx_nu ;
reg [7:0] uart_write_data [0:39];
reg uart_fifo_enable ; // fifo mode disable
- reg flag ;
+ reg flag ;
+ reg [7:0] dCnt ; // DataCount
- reg [31:0] check_sum ;
+ reg [31:0] check_sum ;
- integer d_risc_id;
+ integer d_risc_id;
integer i,j;
@@ -168,11 +172,11 @@
`ifdef WFDUMP
initial begin
$dumpfile("simx.vcd");
- $dumpvars(3, arduino_character_analysis);
- $dumpvars(0, arduino_character_analysis.u_top.u_riscv_top.i_core_top_0);
- $dumpvars(0, arduino_character_analysis.u_top.u_riscv_top.u_connect);
- $dumpvars(0, arduino_character_analysis.u_top.u_riscv_top.u_intf);
- $dumpvars(0, arduino_character_analysis.u_top.u_uart_i2c_usb_spi.u_uart0_core);
+ $dumpvars(2, `TB_TOP);
+ //$dumpvars(0, `TB_TOP.u_top.u_riscv_top.i_core_top_0);
+ //$dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_connect);
+ //$dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_intf);
+ $dumpvars(0, `TB_TOP.u_top.u_uart_i2c_usb_spi.u_uart0_core);
end
`endif
@@ -213,7 +217,7 @@
uart_parity_en = 0; // parity enable
uart_even_odd_parity = 1; // 0: odd parity; 1: even parity
tb_set_uart_baud(50000000,1152000,uart_divisor);// 50Mhz Ref clock, Baud Rate: 230400
- uart_timeout = 2000;// wait time limit
+ uart_timeout = 750;// wait time limit
uart_fifo_enable = 0; // fifo mode disable
$value$plusargs("risc_core_id=%d", d_risc_id);
@@ -221,24 +225,27 @@
#200; // Wait for reset removal
repeat (10) @(posedge clock);
$display("Monitor: Standalone User Risc Boot Test Started");
+
+ init();
+ wait_riscv_boot();
// Remove Wb Reset
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+ //wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
repeat (2) @(posedge clock);
#1;
// Remove WB and SPI Reset and CORE under Reset
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h01F);
+ //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h01F);
// QSPI SRAM:CS#2 Switch to QSPI Mode
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h1000); // Change the Bank Sel 1000
- wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_CTRL1,{16'h0,1'b0,1'b0,4'b0000,P_MODE_SWITCH_IDLE,P_SINGLE,P_SINGLE,4'b0100});
- wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_CTRL2,{8'h0,2'b00,2'b00,P_FSM_C,8'h00,8'h38});
- wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_WDATA,32'h0);
+ //wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h1000); // Change the Bank Sel 1000
+ // wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_CTRL1,{16'h0,1'b0,1'b0,4'b0000,P_MODE_SWITCH_IDLE,P_SINGLE,P_SINGLE,4'b0100});
+ // wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_CTRL2,{8'h0,2'b00,2'b00,P_FSM_C,8'h00,8'h38});
+ // wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_WDATA,32'h0);
// Remove all the reset
if(d_risc_id == 0) begin
$display("STATUS: Working with Risc core 0");
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+ //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
end else if(d_risc_id == 1) begin
$display("STATUS: Working with Risc core 1");
wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
@@ -257,34 +264,36 @@
tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity,
uart_stick_parity, uart_timeout, uart_divisor);
- repeat (40000) @(posedge clock); // wait for Processor Get Ready
flag = 0;
check_sum = 0;
+ dCnt = 0;
fork
begin
fork
begin
- tb_uart.write_char ("A");
- tb_uart.write_char (" ");
- tb_uart.write_char ("\n");
- tb_uart.write_char ("b");
- tb_uart.write_char (";");
- tb_uart.write_char ("F");
- end
- begin
- while(flag == 0)
+ while(dCnt < 7 )
begin
- tb_uart.read_char(read_data,flag);
- if(flag == 0) begin
- $write ("%c",read_data);
- check_sum = check_sum+read_data;
- end
+ flag = 0;
+ while(flag == 0) begin
+ tb_uart.read_char(read_data,flag);
+ if(flag == 0) begin
+ $write ("%c",read_data);
+ check_sum = check_sum+read_data;
+ end
+ end
+ if(dCnt == 0) tb_uart.write_char ("A");
+ if(dCnt == 1) tb_uart.write_char (" ");
+ if(dCnt == 2) tb_uart.write_char ("\n");
+ if(dCnt == 3) tb_uart.write_char ("b");
+ if(dCnt == 4) tb_uart.write_char (";");
+ if(dCnt == 5) tb_uart.write_char ("F");
+ dCnt = dCnt+1;
end
end
join
end
begin
- repeat (3000000) @(posedge clock); // wait for Processor Get Ready
+ repeat (4000000) @(posedge clock); // wait for Processor Get Ready
end
join_any
@@ -361,6 +370,9 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[5] = 1'b1; // RESET
+assign io_in[21] = 1'b0; // CLOCK
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
@@ -374,25 +386,25 @@
// user core using the gpio pads
// ----------------------------------------------------
- wire flash_clk = io_out[24];
- wire flash_csb = io_out[25];
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
// Creating Pad Delay
- wire #1 io_oeb_29 = io_oeb[29];
- wire #1 io_oeb_30 = io_oeb[30];
- wire #1 io_oeb_31 = io_oeb[31];
- wire #1 io_oeb_32 = io_oeb[32];
- tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
- tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
- tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
- tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
- assign io_in[29] = flash_io0;
- assign io_in[30] = flash_io1;
- assign io_in[31] = flash_io2;
- assign io_in[32] = flash_io3;
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
// Quard flash
- s25fl256s #(.mem_file_name("arduino_character_analysis.ino.hex"),
+ s25fl256s #(.mem_file_name(`TB_HEX),
.otp_file_name("none"),
.TimingModel("S25FL512SAGMFI010_F_30pF"))
u_spi_flash_256mb (
@@ -408,7 +420,7 @@
);
- wire spiram_csb = io_out[27];
+ wire spiram_csb = io_out[31];
is62wvs1288 #(.mem_file_name("none"))
u_sram (
@@ -427,8 +439,8 @@
// --------------------------
wire uart_txd,uart_rxd;
-assign uart_txd = io_out[2];
-assign io_in[1] = uart_rxd ;
+assign uart_txd = io_out[7];
+assign io_in[6] = uart_rxd ;
uart_agent tb_uart(
.mclk (clock ),
@@ -566,6 +578,7 @@
`endif
**/
+`include "user_tasks.sv"
endmodule
`include "s25fl256s.sv"
`default_nettype wire
diff --git a/verilog/dv/arduino_digital_port_control/Makefile b/verilog/dv/arduino_digital_port_control/Makefile
index 7168229..bd1353c 100644
--- a/verilog/dv/arduino_digital_port_control/Makefile
+++ b/verilog/dv/arduino_digital_port_control/Makefile
@@ -99,10 +99,10 @@
${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
${GCC_PREFIX}-ar rcs core.a SPI.cpp.o
- ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.ino.elf
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.ino.elf ${PATTERN}.ino.bin
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.ino.elf ${PATTERN}.ino.hex
- ${GCC_PREFIX}-objdump -D ${PATTERN}.ino.elf > ${PATTERN}.ino.dump
+ ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.elf
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.elf ${PATTERN}.bin
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.elf ${PATTERN}.hex
+ ${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
rm *.o *.a
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
diff --git a/verilog/dv/arduino_digital_port_control/arduino_digital_port_control_tb.v b/verilog/dv/arduino_digital_port_control/arduino_digital_port_control_tb.v
index 1b1cbe1..07d7b46 100644
--- a/verilog/dv/arduino_digital_port_control/arduino_digital_port_control_tb.v
+++ b/verilog/dv/arduino_digital_port_control/arduino_digital_port_control_tb.v
@@ -71,6 +71,8 @@
`include "is62wvs1288.v"
`include "bfm_ad5205.sv"
+`define TB_HEX "arduino_digital_port_control.hex"
+`define TB_TOP arduino_digital_port_control_tb
module arduino_digital_port_control_tb;
reg clock;
reg wb_rst_i;
@@ -152,12 +154,12 @@
`ifdef WFDUMP
initial begin
$dumpfile("simx.vcd");
- $dumpvars(3, arduino_digital_port_control_tb);
- //$dumpvars(0, arduino_digital_port_control_tb.u_top.u_riscv_top.i_core_top_0);
- //$dumpvars(0, arduino_digital_port_control_tb.u_top.u_riscv_top.u_connect);
- //$dumpvars(0, arduino_digital_port_control_tb.u_top.u_riscv_top.u_intf);
- $dumpvars(0, arduino_digital_port_control_tb.u_top.u_pinmux);
- $dumpvars(0, arduino_digital_port_control_tb.u_top.u_uart_i2c_usb_spi);
+ $dumpvars(3, `TB_TOP);
+ //$dumpvars(0, `TB_TOP.u_top.u_riscv_top.i_core_top_0);
+ //$dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_connect);
+ //$dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_intf);
+ $dumpvars(0, `TB_TOP.u_top.u_pinmux);
+ $dumpvars(0, `TB_TOP.u_top.u_uart_i2c_usb_spi);
end
`endif
@@ -291,14 +293,16 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[5] = 1'b1; // RESET
//-------------------------------------------------------------------------------------
// Integrate the Serial SPI to ad5204/5206 (4-/6-Channel Digital Potentiometers)
// https://www.analog.com/media/en/technical-documentation/data-sheets/ad5204_5206.pdf
// -----------------------------------------------------------------------------------
- wire sspi_sck = io_out[16];
- wire sspi_sdi = io_out[15];
- wire sspi_ssn = io_out[13];
+ wire sspi_sck = io_out[21];
+ wire sspi_sdi = io_out[20];
+ wire sspi_ssn = io_out[18];
wire [2:0] p_channel; // potentiometer channel
wire [7:0] p_position; // potentiometer position
@@ -324,25 +328,25 @@
// user core using the gpio pads
// ----------------------------------------------------
- wire flash_clk = io_out[24];
- wire flash_csb = io_out[25];
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
// Creating Pad Delay
- wire #1 io_oeb_29 = io_oeb[29];
- wire #1 io_oeb_30 = io_oeb[30];
- wire #1 io_oeb_31 = io_oeb[31];
- wire #1 io_oeb_32 = io_oeb[32];
- tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
- tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
- tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
- tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
- assign io_in[29] = flash_io0;
- assign io_in[30] = flash_io1;
- assign io_in[31] = flash_io2;
- assign io_in[32] = flash_io3;
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
// Quard flash
- s25fl256s #(.mem_file_name("arduino_digital_port_control.ino.hex"),
+ s25fl256s #(.mem_file_name(`TB_HEX),
.otp_file_name("none"),
.TimingModel("S25FL512SAGMFI010_F_30pF"))
u_spi_flash_256mb (
@@ -358,7 +362,7 @@
);
- wire spiram_csb = io_out[27];
+ wire spiram_csb = io_out[31];
is62wvs1288 #(.mem_file_name("none"))
u_sram (
diff --git a/verilog/dv/arduino_gpio_intr/Makefile b/verilog/dv/arduino_gpio_intr/Makefile
new file mode 100644
index 0000000..0912a65
--- /dev/null
+++ b/verilog/dv/arduino_gpio_intr/Makefile
@@ -0,0 +1,140 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+
+# ---- Include Partitioned Makefiles ----
+
+CONFIG = caravel_user_project
+
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+
+DESIGNS?=../../..
+TOOLS?=/opt/riscv32i/
+
+export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
+export RISCDUINO_BOARD ?= $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
+## YIFIVE FIRMWARE
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+GCC_PREFIX?=riscv32-unknown-elf
+
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+DUMP?=OFF
+RISC_CORE?=0
+
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
+.SUFFIXES:
+
+PATTERN = arduino_gpio_intr
+
+all: ${PATTERN:=.vcd}
+
+
+vvp: ${PATTERN:=.vvp}
+
+%.vvp: %_tb.v
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${PATTERN}.ino.cpp -o ${PATTERN}.ino.cpp.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/Print.cpp -o Print.cpp.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WMath.cpp -o WMath.cpp.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WString.cpp -o WString.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WInterrupts.c -o WInterrupts.c.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/fe300prci/fe300prci_driver.c -o fe300prci_driver.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/abi.cpp -o abi.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/plic/plic_driver.c -o plic_driver.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/UARTClass.cpp -o UARTClass.cpp.o
+ ${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/entry.S -o entry.S.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/hooks.c -o hooks.c.o
+ ${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/init.S -o init.S.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/itoa.c -o itoa.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/main.cpp -o main.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/malloc.c -o malloc.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/new.cpp -o new.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/sbrk.c -o sbrk.c.o
+ ${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/start.S -o start.S.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring.c -o wiring.c.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_analog.c -o wiring_analog.c.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_digital.c -o wiring_digital.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_pulse.cpp -o wiring_pulse.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_shift.c -o wiring_shift.c.o
+ ${GCC_PREFIX}-ar rcs core.a Print.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a UARTClass.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a WInterrupts.c.o
+ ${GCC_PREFIX}-ar rcs core.a WMath.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a WString.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a abi.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a fe300prci_driver.c.o
+ ${GCC_PREFIX}-ar rcs core.a plic_driver.c.o
+ ${GCC_PREFIX}-ar rcs core.a entry.S.o
+ ${GCC_PREFIX}-ar rcs core.a hooks.c.o
+ ${GCC_PREFIX}-ar rcs core.a init.S.o
+ ${GCC_PREFIX}-ar rcs core.a itoa.c.o
+ ${GCC_PREFIX}-ar rcs core.a main.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a malloc.c.o
+ ${GCC_PREFIX}-ar rcs core.a new.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a sbrk.c.o
+ ${GCC_PREFIX}-ar rcs core.a start.S.o
+ ${GCC_PREFIX}-ar rcs core.a wiring.c.o
+ ${GCC_PREFIX}-ar rcs core.a wiring_analog.c.o
+ ${GCC_PREFIX}-ar rcs core.a wiring_digital.c.o
+ ${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
+ ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.elf
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.elf ${PATTERN}.bin
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.elf ${PATTERN}.hex
+ ${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
+ rm *.o *.a
+ifeq ($(SIM),RTL)
+ ifeq ($(DUMP),OFF)
+ iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
+ $< -o $@
+ else
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DRISC_BOOT -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
+ $< -o $@
+ endif
+else
+ ifeq ($(DUMP),OFF)
+ iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+ $< -o $@
+ else
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+ $< -o $@
+ endif
+endif
+
+%.vcd: %.vvp
+ vvp $< +risc_core_id=$(RISC_CORE)
+
+
+# ---- Clean ----
+
+clean:
+ rm -f *.elf *.hex *.bin *.vvp *.vcd *.log *.dump *.a *.o
+
+.PHONY: clean hex all
diff --git a/verilog/dv/arduino_gpio_intr/arduino_gpio_intr.ino b/verilog/dv/arduino_gpio_intr/arduino_gpio_intr.ino
new file mode 100644
index 0000000..fd1a9fe
--- /dev/null
+++ b/verilog/dv/arduino_gpio_intr/arduino_gpio_intr.ino
@@ -0,0 +1,73 @@
+
+/*
+
+ Analog input, analog output, serial output
+
+ Reads an analog input pin, maps the result to a range from 0 to 255 and uses
+
+ the result to set the pulse width modulation (PWM) of an output pin.
+
+ Also prints the results to the Serial Monitor.
+
+ The circuit:
+
+ - potentiometer connected to analog pin 0.
+
+ Center pin of the potentiometer goes to the analog pin.
+
+ side pins of the potentiometer go to +5V and ground
+
+ - LED connected from digital pin 9 to ground
+
+ created 29 Dec. 2008
+
+ modified 9 Apr 2012
+
+ by Tom Igoe
+
+ This example code is in the public domain.
+
+ http://www.arduino.cc/en/Tutorial/AnalogInOutSerial
+
+*/
+
+#include"Arduino.h"
+// These constants won't change. They're used to give names to the pins used:
+
+
+int but1=2;
+int but2=3;
+
+
+int pwmValue =0;
+void setup() {
+
+ // initialize serial communications at 9600 bps:
+ Serial.begin(9600);
+
+}
+
+void loop() {
+
+ attachInterrupt(digitalPinToInterrupt(but1),increase,LOW);
+ attachInterrupt(digitalPinToInterrupt(but2),reset_pwm,FALLING);
+
+
+
+ delay(1);
+}
+
+
+void increase()
+ {
+ pwmValue = pwmValue + 10;
+ if(pwmValue > 255) pwmValue = 0;;
+
+ Serial.print("String length is: ");
+ Serial.println(pwmValue);
+
+
+ }
+ void reset_pwm(){
+ pwmValue =0; // 0V
+ }
\ No newline at end of file
diff --git a/verilog/dv/arduino_gpio_intr/arduino_gpio_intr.ino.cpp b/verilog/dv/arduino_gpio_intr/arduino_gpio_intr.ino.cpp
new file mode 100644
index 0000000..8c75087
--- /dev/null
+++ b/verilog/dv/arduino_gpio_intr/arduino_gpio_intr.ino.cpp
@@ -0,0 +1,67 @@
+
+/*
+Testing the GPIO Interrupt
+
+*/
+
+#include"Arduino.h"
+// These constants won't change. They're used to give names to the pins used:
+
+
+
+
+int pwmValue =0;
+void setup();
+void loop();
+void increase_2();
+void decrease_1();
+void setup() {
+
+ // initialize serial communications at 9600 bps:
+ Serial.begin(1152000);
+ //attachInterrupt(digitalPinToInterrupt(0),increase_2,RISING); // Exclude UART
+ //attachInterrupt(digitalPinToInterrupt(1),decrease_1,FALLING); // Exclude UART
+ attachInterrupt(digitalPinToInterrupt(2),increase_2,RISING);
+ attachInterrupt(digitalPinToInterrupt(3),decrease_1,FALLING);
+ attachInterrupt(digitalPinToInterrupt(4),increase_2,RISING);
+ attachInterrupt(digitalPinToInterrupt(5),decrease_1,FALLING);
+ attachInterrupt(digitalPinToInterrupt(6),increase_2,RISING);
+ attachInterrupt(digitalPinToInterrupt(7),decrease_1,FALLING);
+ attachInterrupt(digitalPinToInterrupt(8),increase_2,RISING);
+ attachInterrupt(digitalPinToInterrupt(9),decrease_1,FALLING);
+
+ attachInterrupt(digitalPinToInterrupt(10),increase_2,RISING);
+ attachInterrupt(digitalPinToInterrupt(11),decrease_1,FALLING);
+ attachInterrupt(digitalPinToInterrupt(12),increase_2,RISING);
+ attachInterrupt(digitalPinToInterrupt(13),decrease_1,FALLING);
+ attachInterrupt(digitalPinToInterrupt(14),increase_2,RISING);
+ attachInterrupt(digitalPinToInterrupt(15),decrease_1,FALLING);
+ attachInterrupt(digitalPinToInterrupt(16),increase_2,RISING);
+ attachInterrupt(digitalPinToInterrupt(17),decrease_1,FALLING);
+ attachInterrupt(digitalPinToInterrupt(18),increase_2,RISING);
+ attachInterrupt(digitalPinToInterrupt(19),decrease_1,FALLING);
+
+ attachInterrupt(digitalPinToInterrupt(20),increase_2,RISING);
+ attachInterrupt(digitalPinToInterrupt(21),decrease_1,FALLING);
+ attachInterrupt(digitalPinToInterrupt(22),increase_2,RISING);
+}
+
+void loop() {
+
+ delay(1);
+}
+
+
+void decrease_1() {
+ pwmValue = pwmValue - 1;
+
+ Serial.print("PWM Value Decrease to: ");
+ Serial.println(pwmValue);
+ }
+
+void increase_2() {
+ pwmValue = pwmValue + 2;
+
+ Serial.print("PWM Value Increase to: ");
+ Serial.println(pwmValue);
+ }
diff --git a/verilog/dv/arduino_gpio_intr/arduino_gpio_intr_tb.v b/verilog/dv/arduino_gpio_intr/arduino_gpio_intr_tb.v
new file mode 100644
index 0000000..608d120
--- /dev/null
+++ b/verilog/dv/arduino_gpio_intr/arduino_gpio_intr_tb.v
@@ -0,0 +1,659 @@
+////////////////////////////////////////////////////////////////////////////
+// SPDX-FileCopyrightText: 2021 , Dinesh Annayya
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+// SPDX-FileContributor: Modified by Dinesh Annayya <dinesha@opencores.org>
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Standalone User validation Test bench ////
+//// ////
+//// This file is part of the riscdunio cores project ////
+//// https://github.com/dineshannayya/riscdunio.git ////
+//// ////
+//// Description ////
+//// This is a standalone test bench to validate the ////
+//// Digital core. ////
+//// This test bench to validate Arduino Interrupt ////
+//// ////
+//// To Do: ////
+//// nothing ////
+//// ////
+//// Author(s): ////
+//// - Dinesh Annayya, dinesh.annayya@gmail.com ////
+//// ////
+//// Revision : ////
+//// 0.1 - 29th July 2022, Dinesh A ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2000 Authors and OPENCORES.ORG ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+
+`default_nettype wire
+
+`timescale 1 ns / 1 ns
+
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
+`include "is62wvs1288.v"
+`include "user_params.svh"
+`include "uart_agent.v"
+
+`define TB_HEX "arduino_gpio_intr.hex"
+`define TB_TOP arduino_gpio_intr_tb
+
+module `TB_TOP;
+ reg clock;
+ reg wb_rst_i;
+ reg power1, power2;
+ reg power3, power4;
+
+ reg wbd_ext_cyc_i; // strobe/request
+ reg wbd_ext_stb_i; // strobe/request
+ reg [31:0] wbd_ext_adr_i; // address
+ reg wbd_ext_we_i; // write
+ reg [31:0] wbd_ext_dat_i; // data output
+ reg [3:0] wbd_ext_sel_i; // byte enable
+
+ wire [31:0] wbd_ext_dat_o; // data input
+ wire wbd_ext_ack_o; // acknowlegement
+ wire wbd_ext_err_o; // error
+
+ // User I/O
+ wire [37:0] io_oeb;
+ wire [37:0] io_out;
+ wire [37:0] io_in;
+
+ wire gpio;
+ wire [37:0] mprj_io;
+ wire [7:0] mprj_io_0;
+ reg test_fail;
+ reg [31:0] read_data;
+ //----------------------------------
+ // Uart Configuration
+ // ---------------------------------
+ reg [1:0] uart_data_bit ;
+ reg uart_stop_bits ; // 0: 1 stop bit; 1: 2 stop bit;
+ reg uart_stick_parity ; // 1: force even parity
+ reg uart_parity_en ; // parity enable
+ reg uart_even_odd_parity ; // 0: odd parity; 1: even parity
+
+ reg [7:0] uart_data ;
+ reg [15:0] uart_divisor ; // divided by n * 16
+ reg [15:0] uart_timeout ;// wait time limit
+
+ reg [15:0] uart_rx_nu ;
+ reg [15:0] uart_tx_nu ;
+ reg [7:0] uart_write_data [0:39];
+ reg uart_fifo_enable ; // fifo mode disable
+ reg flag ;
+ reg compare_start ; // User Need to make sure that compare start match with RiscV core completing initial booting
+
+ reg [31:0] check_sum ;
+
+ integer d_risc_id;
+
+ integer i,j;
+
+
+
+
+ // 50Mhz CLock
+ always #10 clock <= (clock === 1'b0);
+
+ initial begin
+ clock = 0;
+ flag = 0;
+ compare_start = 0;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ end
+
+ `ifdef WFDUMP
+ initial begin
+ $dumpfile("simx.vcd");
+ $dumpvars(3, `TB_TOP);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top);
+ $dumpvars(0, `TB_TOP.u_top.u_pinmux);
+ end
+ `endif
+
+
+ wire [15:0] irq_lines = u_top.u_pinmux.u_glbl_reg.irq_lines;
+
+
+/**********************************************************************
+ Arduino Digital PinMapping
+ ATMGA328 Pin No Functionality Arduino Pin Carvel Pin Mapping
+ Pin-2 PD0/RXD[0] 0 digital_io[6]
+ Pin-3 PD1/TXD[0] 1 digital_io[7]
+ Pin-4 PD2/RXD[1]/INT0 2 digital_io[8]
+ Pin-5 PD3/INT1/OC2B(PWM0) 3 digital_io[9]
+ Pin-6 PD4/TXD[1] 4 digital_io[10]
+ Pin-11 PD5/SS[3]/OC0B(PWM1)/T1 5 digital_io[13]
+ Pin-12 PD6/SS[2]/OC0A(PWM2)/AIN0 6 digital_io[14]/analog_io[2]
+ Pin-13 PD7/A1N1 7 digital_io[15]/analog_io[3]
+ Pin-14 PB0/CLKO/ICP1 8 digital_io[11]
+ Pin-15 PB1/SS[1]OC1A(PWM3) 9 digital_io[12]
+ Pin-16 PB2/SS[0]/OC1B(PWM4) 10 digital_io[13]
+ Pin-17 PB3/MOSI/OC2A(PWM5) 11 digital_io[14]
+ Pin-18 PB4/MISO 12 digital_io[15]
+ Pin-19 PB5/SCK 13 digital_io[16]
+
+ Pin-23 ADC0 14 digital_io[22]
+ Pin-24 ADC1 15 digital_io[23]
+ Pin-25 ADC2 16 digital_io[24]
+ Pin-26 ADC3 17 digital_io[25]
+ Pin-27 SDA 18 digital_io[26]
+ Pin-28 SCL 19 digital_io[27]
+
+ Pin-9 XTAL1 20 digital_io[11]
+ Pin-10 XTAL2 21 digital_io[12]
+ Pin-1 RESET 22 digital_io[5]
+*****************************************************************************/
+
+// Exclude UART TXD/RXD and RESET
+reg [21:2] arduino_din;
+assign {
+ //io_in[0], - Exclude RESET
+ io_in[12],
+ io_in[11],
+ io_in[27],
+ io_in[26],
+ io_in[25],
+ io_in[24],
+ io_in[23],
+ io_in[22],
+ io_in[21],
+ io_in[20],
+ io_in[19],
+ io_in[18],
+ io_in[17],
+ io_in[16],
+ io_in[15],
+ io_in[14],
+ io_in[13],
+ io_in[10],
+ io_in[9],
+ io_in[8]
+ // Uart pins io_in[2], io_in[1] are excluded
+ } = (u_top.p_reset_n == 0) ? 23'hZZ_ZZZZ: arduino_din; // Tri-state untill Strap pull completed
+
+ /*************************************************************************
+ * This is Baud Rate to clock divider conversion for Test Bench
+ * Note: DUT uses 16x baud clock, where are test bench uses directly
+ * baud clock, Due to 16x Baud clock requirement at RTL, there will be
+ * some resolution loss, we expect at lower baud rate this resolution
+ * loss will be less. For Quick simulation perpose higher baud rate used
+ * *************************************************************************/
+ task tb_set_uart_baud;
+ input [31:0] ref_clk;
+ input [31:0] baud_rate;
+ output [31:0] baud_div;
+ reg [31:0] baud_div;
+ begin
+ // for 230400 Baud = (50Mhz/230400) = 216.7
+ baud_div = ref_clk/baud_rate; // Get the Bit Baud rate
+ // Baud 16x = 216/16 = 13
+ baud_div = baud_div/16; // To find the RTL baud 16x div value to find similar resolution loss in test bench
+ // Test bench baud clock , 16x of above value
+ // 13 * 16 = 208,
+ // (Note if you see original value was 216, now it's 208 )
+ baud_div = baud_div * 16;
+ // Test bench half cycle counter to toggle it
+ // 208/2 = 104
+ baud_div = baud_div/2;
+ //As counter run's from 0 , substract from 1
+ baud_div = baud_div-1;
+ end
+ endtask
+
+
+ reg[7:0] pinmap[0:22]; //ardiono to gpio pinmaping
+
+ initial begin
+ arduino_din[22:2] = 23'b010_1010_1010_1010_1010_10; // Initialise based on test case edge
+ pinmap[0] = 24; // PD0 - GPIO-24
+ pinmap[1] = 25; // PD1 - GPIO-25
+ pinmap[2] = 26; // PD2 - GPIO-26
+ pinmap[3] = 27; // PD3 - GPIO-27
+ pinmap[4] = 28; // PD4 - GPIO-28
+ pinmap[5] = 29; // PD5 - GPIO-29
+ pinmap[6] = 30; // PD6 - GPIO-30
+ pinmap[7] = 31; // PD7 - GPIO-31
+ pinmap[8] = 8; // PB0 - GPIO-8
+ pinmap[9] = 9; // PB1 - GPIO-9
+ pinmap[10] = 10; // PB2 - GPIO-10
+ pinmap[11] = 11; // PB3 - GPIO-11
+ pinmap[12] = 12; // PB4 - GPIO-12
+ pinmap[13] = 13; // PB5 - GPIO-13
+ pinmap[14] = 16; // PC0 - GPIO-16
+ pinmap[15] = 17; // PC1 - GPIO-17
+ pinmap[16] = 18; // PC2 - GPIO-18
+ pinmap[17] = 19; // PC3 - GPIO-19
+ pinmap[18] = 20; // PC4 - GPIO-20
+ pinmap[19] = 21; // PC5 - GPIO-21
+ pinmap[20] = 14; // PB6 - GPIO-14
+ pinmap[21] = 15; // PB7 - GPIO-15
+ pinmap[22] = 22; // PC6 - GPIO-22
+
+
+ uart_data_bit = 2'b11;
+ uart_stop_bits = 0; // 0: 1 stop bit; 1: 2 stop bit;
+ uart_stick_parity = 0; // 1: force even parity
+ uart_parity_en = 0; // parity enable
+ uart_even_odd_parity = 1; // 0: odd parity; 1: even parity
+ tb_set_uart_baud(50000000,1152000,uart_divisor);// 50Mhz Ref clock, Baud Rate: 230400
+ uart_timeout = 1000;// wait time limit
+ uart_fifo_enable = 0; // fifo mode disable
+
+ $value$plusargs("risc_core_id=%d", d_risc_id);
+
+ init();
+ wait_riscv_boot();
+
+ #200; // Wait for reset removal
+ repeat (10) @(posedge clock);
+ $display("Monitor: Standalone User Risc Boot Test Started");
+
+ // Remove Wb Reset
+ //wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+
+ repeat (2) @(posedge clock);
+ #1;
+ // Remove all the reset
+ if(d_risc_id == 0) begin
+ $display("STATUS: Working with Risc core 0");
+ //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+ end else if(d_risc_id == 1) begin
+ $display("STATUS: Working with Risc core 1");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
+ end else if(d_risc_id == 2) begin
+ $display("STATUS: Working with Risc core 2");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h41F);
+ end else if(d_risc_id == 3) begin
+ $display("STATUS: Working with Risc core 3");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h81F);
+ end
+
+ repeat (100) @(posedge clock); // wait for Processor Get Ready
+
+ tb_uart.debug_mode = 0; // disable debug display
+ tb_uart.uart_init;
+ tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity,
+ uart_stick_parity, uart_timeout, uart_divisor);
+
+ repeat (40000) @(posedge clock); // wait for Processor Get Ready
+ flag = 0;
+ check_sum = 0;
+ compare_start = 1;
+
+ fork
+
+ begin
+ $display("Start : Processing One Interrupt At a Time ");
+ // Interrupt- One After One
+ for(i =2; i < 22; i = i+1) begin
+ arduino_din[i] = !arduino_din[i]; // Invert the edge to create interrupt;
+ repeat (10) @(posedge clock);
+ arduino_din[i] = !arduino_din[i]; // Invert the edge to remove the interrupt
+ repeat (10) @(posedge clock);
+ wait(u_top.u_riscv_top.irq_lines[pinmap[i]] == 1'b1); // Wait for Interrupt assertion
+ wait(u_top.u_riscv_top.irq_lines[pinmap[i]] == 1'b0); // Wait for Interrupt De-assertion
+
+ end
+ repeat (10000) @(posedge clock); // Wait for flush our uart message
+ $display("End : Processing One Interrupt At a Time ");
+
+ // Generate all interrupt and Wait for all interrupt clearing
+ $display("Start: Processing All Interrupt ");
+ for(i =2; i < 22; i = i+1) begin
+ arduino_din[i] = !arduino_din[i]; // Invert the edge to create interrupt;
+ repeat (5) @(posedge clock);
+ arduino_din[i] = !arduino_din[i]; // Invert the edge to remove the interrupt
+ repeat (5) @(posedge clock);
+ wait(u_top.u_riscv_top.irq_lines[pinmap[i]] == 1'b1); // Wait for Interrupt assertion
+
+ end
+ wait(u_top.u_riscv_top.irq_lines == 'h0); // Wait for All Interrupt De-assertion
+ repeat (10000) @(posedge clock); // Wait for flush our uart message
+ $display("End: Processing All Interrupt ");
+ end
+ begin
+ while(flag == 0)
+ begin
+ tb_uart.read_char(read_data,flag);
+ if(flag == 0) begin
+ $write ("%c",read_data);
+ check_sum = check_sum+read_data;
+ end
+ end
+ end
+ begin
+ repeat (900000) @(posedge clock); // wait for Processor Get Ready
+ end
+ join_any
+
+ #1000
+ tb_uart.report_status(uart_rx_nu, uart_tx_nu);
+
+ test_fail = 0;
+
+ $display("Total Rx Char: %d Check Sum : %x ",uart_rx_nu, check_sum);
+ // Check
+ // if all the 102 byte received
+ // if no error
+ if(uart_rx_nu != 1063) test_fail = 1;
+ if(check_sum != 32'h143de) test_fail = 1;
+ if(tb_uart.err_cnt != 0) test_fail = 1;
+
+
+ $display("###################################################");
+ if(test_fail == 0) begin
+ `ifdef GL
+ $display("Monitor: Standalone String (GL) Passed");
+ `else
+ $display("Monitor: Standalone String (RTL) Passed");
+ `endif
+ end else begin
+ `ifdef GL
+ $display("Monitor: Standalone String (GL) Failed");
+ `else
+ $display("Monitor: Standalone String (RTL) Failed");
+ `endif
+ end
+ $display("###################################################");
+ $finish;
+ end
+
+wire USER_VDD1V8 = 1'b1;
+wire VSS = 1'b0;
+
+user_project_wrapper u_top(
+`ifdef USE_POWER_PINS
+ .vccd1(USER_VDD1V8), // User area 1 1.8V supply
+ .vssd1(VSS), // User area 1 digital ground
+`endif
+ .wb_clk_i (clock), // System clock
+ .user_clock2 (1'b1), // Real-time clock
+ .wb_rst_i (wb_rst_i), // Regular Reset signal
+
+ .wbs_cyc_i (wbd_ext_cyc_i), // strobe/request
+ .wbs_stb_i (wbd_ext_stb_i), // strobe/request
+ .wbs_adr_i (wbd_ext_adr_i), // address
+ .wbs_we_i (wbd_ext_we_i), // write
+ .wbs_dat_i (wbd_ext_dat_i), // data output
+ .wbs_sel_i (wbd_ext_sel_i), // byte enable
+
+ .wbs_dat_o (wbd_ext_dat_o), // data input
+ .wbs_ack_o (wbd_ext_ack_o), // acknowlegement
+
+
+ // Logic Analyzer Signals
+ .la_data_in ('1) ,
+ .la_data_out (),
+ .la_oenb ('0),
+
+
+ // IOs
+ .io_in (io_in) ,
+ .io_out (io_out) ,
+ .io_oeb (io_oeb) ,
+
+ .user_irq ()
+
+);
+// SSPI Slave I/F
+assign io_in[5] = 1'b1; // RESET
+//assign io_in[21] = 1'b0; // CLOCK
+
+`ifndef GL // Drive Power for Hold Fix Buf
+ // All standard cell need power hook-up for functionality work
+ initial begin
+
+ end
+`endif
+
+//------------------------------------------------------
+// Integrate the Serial flash with qurd support to
+// user core using the gpio pads
+// ----------------------------------------------------
+
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
+ // Creating Pad Delay
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
+
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
+
+ // Quard flash
+ s25fl256s #(.mem_file_name(`TB_HEX),
+ .otp_file_name("none"),
+ .TimingModel("S25FL512SAGMFI010_F_30pF"))
+ u_spi_flash_256mb (
+ // Data Inputs/Outputs
+ .SI (flash_io0),
+ .SO (flash_io1),
+ // Controls
+ .SCK (flash_clk),
+ .CSNeg (flash_csb),
+ .WPNeg (flash_io2),
+ .HOLDNeg (flash_io3),
+ .RSTNeg (!wb_rst_i)
+
+ );
+
+ wire spiram_csb = io_out[31];
+
+ is62wvs1288 #(.mem_file_name("none"))
+ u_sram (
+ // Data Inputs/Outputs
+ .io0 (flash_io0),
+ .io1 (flash_io1),
+ // Controls
+ .clk (flash_clk),
+ .csb (spiram_csb),
+ .io2 (flash_io2),
+ .io3 (flash_io3)
+ );
+
+//---------------------------
+// UART Agent integration
+// --------------------------
+wire uart_txd,uart_rxd;
+
+assign uart_txd = io_out[7];
+assign io_in[6] = uart_rxd ;
+
+uart_agent tb_uart(
+ .mclk (clock ),
+ .txd (uart_rxd ),
+ .rxd (uart_txd )
+ );
+
+
+//----------------------------
+// All the task are defined here
+//----------------------------
+
+
+
+task wb_user_core_write;
+input [31:0] address;
+input [31:0] data;
+begin
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_adr_i =address; // address
+ wbd_ext_we_i ='h1; // write
+ wbd_ext_dat_i =data; // data output
+ wbd_ext_sel_i ='hF; // byte enable
+ wbd_ext_cyc_i ='h1; // strobe/request
+ wbd_ext_stb_i ='h1; // strobe/request
+ wait(wbd_ext_ack_o == 1);
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
+ repeat (2) @(posedge clock);
+end
+endtask
+
+task wb_user_core_read;
+input [31:0] address;
+output [31:0] data;
+reg [31:0] data;
+begin
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_adr_i =address; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='0; // data output
+ wbd_ext_sel_i ='hF; // byte enable
+ wbd_ext_cyc_i ='h1; // strobe/request
+ wbd_ext_stb_i ='h1; // strobe/request
+ wait(wbd_ext_ack_o == 1);
+ repeat (1) @(negedge clock);
+ data = wbd_ext_dat_o;
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
+ repeat (2) @(posedge clock);
+end
+endtask
+
+task wb_user_core_read_check;
+input [31:0] address;
+output [31:0] data;
+input [31:0] cmp_data;
+reg [31:0] data;
+begin
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_adr_i =address; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='0; // data output
+ wbd_ext_sel_i ='hF; // byte enable
+ wbd_ext_cyc_i ='h1; // strobe/request
+ wbd_ext_stb_i ='h1; // strobe/request
+ wait(wbd_ext_ack_o == 1);
+ repeat (1) @(negedge clock);
+ data = wbd_ext_dat_o;
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ if(data !== cmp_data) begin
+ $display("ERROR : WB USER ACCESS READ Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
+ test_fail = 1;
+ end else begin
+ $display("STATUS: WB USER ACCESS READ Address : 0x%x, Data : 0x%x",address,data);
+ end
+ repeat (2) @(posedge clock);
+end
+endtask
+
+`ifdef GL
+
+wire wbd_spi_stb_i = u_top.u_qspi_master.wbd_stb_i;
+wire wbd_spi_ack_o = u_top.u_qspi_master.wbd_ack_o;
+wire wbd_spi_we_i = u_top.u_qspi_master.wbd_we_i;
+wire [31:0] wbd_spi_adr_i = u_top.u_qspi_master.wbd_adr_i;
+wire [31:0] wbd_spi_dat_i = u_top.u_qspi_master.wbd_dat_i;
+wire [31:0] wbd_spi_dat_o = u_top.u_qspi_master.wbd_dat_o;
+wire [3:0] wbd_spi_sel_i = u_top.u_qspi_master.wbd_sel_i;
+
+wire wbd_uart_stb_i = u_top.u_uart_i2c_usb_spi.reg_cs;
+wire wbd_uart_ack_o = u_top.u_uart_i2c_usb_spi.reg_ack;
+wire wbd_uart_we_i = u_top.u_uart_i2c_usb_spi.reg_wr;
+wire [8:0] wbd_uart_adr_i = u_top.u_uart_i2c_usb_spi.reg_addr;
+wire [7:0] wbd_uart_dat_i = u_top.u_uart_i2c_usb_spi.reg_wdata;
+wire [7:0] wbd_uart_dat_o = u_top.u_uart_i2c_usb_spi.reg_rdata;
+wire wbd_uart_sel_i = u_top.u_uart_i2c_usb_spi.reg_be;
+
+`endif
+
+/**
+`ifdef GL
+//-----------------------------------------------------------------------------
+// RISC IMEM amd DMEM Monitoring TASK
+//-----------------------------------------------------------------------------
+
+`define RISC_CORE user_uart_tb.u_top.u_core.u_riscv_top
+
+always@(posedge `RISC_CORE.wb_clk) begin
+ if(`RISC_CORE.wbd_imem_ack_i)
+ $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
+ if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
+ $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
+ if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
+ $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
+end
+
+`endif
+**/
+`include "user_tasks.sv"
+endmodule
+`include "s25fl256s.sv"
+`default_nettype wire
diff --git a/verilog/dv/arduino_hello_world/Makefile b/verilog/dv/arduino_hello_world/Makefile
index 497a39e..06f0645 100644
--- a/verilog/dv/arduino_hello_world/Makefile
+++ b/verilog/dv/arduino_hello_world/Makefile
@@ -97,31 +97,31 @@
${GCC_PREFIX}-ar rcs core.a wiring_digital.c.o
${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
- ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.ino.elf
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.ino.elf ${PATTERN}.ino.bin
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.ino.elf ${PATTERN}.ino.hex
- ${GCC_PREFIX}-objdump -D ${PATTERN}.ino.elf > ${PATTERN}.ino.dump
+ ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.elf
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.elf ${PATTERN}.bin
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.elf ${PATTERN}.hex
+ ${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
rm *.o *.a
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
- iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
$< -o $@
else
- iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DRISC_BOOT -DSIM -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
$< -o $@
endif
else
ifeq ($(DUMP),OFF)
- iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
else
- iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
diff --git a/verilog/dv/arduino_hello_world/arduino_hello_world_tb.v b/verilog/dv/arduino_hello_world/arduino_hello_world_tb.v
index 344e480..8fc236c 100644
--- a/verilog/dv/arduino_hello_world/arduino_hello_world_tb.v
+++ b/verilog/dv/arduino_hello_world/arduino_hello_world_tb.v
@@ -68,9 +68,13 @@
`timescale 1 ns / 1 ns
`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
+`include "is62wvs1288.v"
+`include "user_params.svh"
`include "uart_agent.v"
-module arduino_hello_world_tb;
+`define TB_HEX "arduino_hello_world.hex"
+`define TB_TOP arduino_hello_world_tb
+module `TB_TOP;
reg clock;
reg wb_rst_i;
reg power1, power2;
@@ -140,11 +144,11 @@
`ifdef WFDUMP
initial begin
$dumpfile("simx.vcd");
- $dumpvars(3, arduino_hello_world_tb);
- //$dumpvars(0, arduino_hello_world_tb.u_top.u_riscv_top.i_core_top_0);
- //$dumpvars(0, arduino_hello_world_tb.u_top.u_riscv_top.u_connect);
- //$dumpvars(0, arduino_hello_world_tb.u_top.u_riscv_top.u_intf);
- $dumpvars(0, arduino_hello_world_tb.u_top.u_uart_i2c_usb_spi.u_uart0_core);
+ $dumpvars(3, `TB_TOP);
+ //$dumpvars(0, `TB_TOP.u_top.u_riscv_top.i_core_top_0);
+ //$dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_connect);
+ //$dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_intf);
+ $dumpvars(0, `TB_TOP.u_top.u_uart_i2c_usb_spi.u_uart0_core);
end
`endif
@@ -194,15 +198,17 @@
repeat (10) @(posedge clock);
$display("Monitor: Standalone User Risc Boot Test Started");
+ init();
+ wait_riscv_boot();
// Remove Wb Reset
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+ //wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
repeat (2) @(posedge clock);
#1;
// Remove all the reset
if(d_risc_id == 0) begin
$display("STATUS: Working with Risc core 0");
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+ //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
end else if(d_risc_id == 1) begin
$display("STATUS: Working with Risc core 1");
wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
@@ -220,7 +226,6 @@
tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity,
uart_stick_parity, uart_timeout, uart_divisor);
- repeat (45000) @(posedge clock); // wait for Processor Get Ready
flag = 1;
@@ -319,6 +324,9 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[5] = 1'b1; // RESET
+assign io_in[21] = 1'b0; // CLOCK
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
@@ -332,25 +340,25 @@
// user core using the gpio pads
// ----------------------------------------------------
- wire flash_clk = io_out[24];
- wire flash_csb = io_out[25];
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
// Creating Pad Delay
- wire #1 io_oeb_29 = io_oeb[29];
- wire #1 io_oeb_30 = io_oeb[30];
- wire #1 io_oeb_31 = io_oeb[31];
- wire #1 io_oeb_32 = io_oeb[32];
- tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
- tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
- tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
- tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
- assign io_in[29] = flash_io0;
- assign io_in[30] = flash_io1;
- assign io_in[31] = flash_io2;
- assign io_in[32] = flash_io3;
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
// Quard flash
- s25fl256s #(.mem_file_name("arduino_hello_world.ino.hex"),
+ s25fl256s #(.mem_file_name(`TB_HEX),
.otp_file_name("none"),
.TimingModel("S25FL512SAGMFI010_F_30pF"))
u_spi_flash_256mb (
@@ -366,14 +374,27 @@
);
+ wire spiram_csb = io_out[31];
+
+ is62wvs1288 #(.mem_file_name("none"))
+ u_sram (
+ // Data Inputs/Outputs
+ .io0 (flash_io0),
+ .io1 (flash_io1),
+ // Controls
+ .clk (flash_clk),
+ .csb (spiram_csb),
+ .io2 (flash_io2),
+ .io3 (flash_io3)
+ );
//---------------------------
// UART Agent integration
// --------------------------
wire uart_txd,uart_rxd;
-assign uart_txd = io_out[2];
-assign io_in[1] = uart_rxd ;
+assign uart_txd = io_out[7];
+assign io_in[6] = uart_rxd ;
uart_agent tb_uart(
.mclk (clock ),
@@ -511,6 +532,7 @@
`endif
**/
+`include "user_tasks.sv"
endmodule
`include "s25fl256s.sv"
`default_nettype wire
diff --git a/verilog/dv/arduino_i2c_scaner/Makefile b/verilog/dv/arduino_i2c_scaner/Makefile
index e6d5947..06dc4bd 100644
--- a/verilog/dv/arduino_i2c_scaner/Makefile
+++ b/verilog/dv/arduino_i2c_scaner/Makefile
@@ -52,9 +52,8 @@
vvp: ${PATTERN:=.vvp}
%.vvp: %_tb.v
- ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard -I${RISCDUINO_BOARD}/libraries/Wire ${PATTERN}.ino.cpp -o ${PATTERN}.ino.cpp.o
- ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard -I${RISCDUINO_BOARD}/libraries/Wire -I${RISCDUINO_BOARD}/libraries/Wire/utility ${RISCDUINO_BOARD}/libraries/Wire/Wire.cpp -o Wire.cpp.o
- ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard -I${RISCDUINO_BOARD}/libraries/Wire -I${RISCDUINO_BOARD}/libraries/Wire/utility ${RISCDUINO_BOARD}/libraries/Wire/utility/twi.c -o twi.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard -I${RISCDUINO_BOARD}/libraries/Wire/src ${PATTERN}.ino.cpp -o ${PATTERN}.ino.cpp.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard -I${RISCDUINO_BOARD}/libraries/Wire/src -I${RISCDUINO_BOARD}/libraries/Wire/src/utility ${RISCDUINO_BOARD}/libraries/Wire/src/Wire.cpp -o Wire.cpp.o
${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/Print.cpp -o Print.cpp.o
${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WMath.cpp -o WMath.cpp.o
${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WString.cpp -o WString.cpp.o
@@ -99,10 +98,10 @@
${GCC_PREFIX}-ar rcs core.a wiring_digital.c.o
${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
- ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o Wire.cpp.o twi.c.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.ino.elf
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.ino.elf ${PATTERN}.ino.bin
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.ino.elf ${PATTERN}.ino.hex
- ${GCC_PREFIX}-objdump -D ${PATTERN}.ino.elf > ${PATTERN}.ino.dump
+ ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o Wire.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.elf
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.elf ${PATTERN}.bin
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.elf ${PATTERN}.hex
+ ${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
rm *.o *.a
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
diff --git a/verilog/dv/arduino_i2c_scaner/arduino_i2c_scaner.ino.cpp b/verilog/dv/arduino_i2c_scaner/arduino_i2c_scaner.ino.cpp
index dc656cb..1900e1f 100644
--- a/verilog/dv/arduino_i2c_scaner/arduino_i2c_scaner.ino.cpp
+++ b/verilog/dv/arduino_i2c_scaner/arduino_i2c_scaner.ino.cpp
@@ -45,7 +45,7 @@
Serial.println("Scanning...");
- for (byte address = 1; address < 127; ++address) {
+ for (byte address = 1; address < 32; ++address) {
// The i2c_scanner uses the return value of
// the Wire.endTransmission to see if
// a device did acknowledge to the address.
@@ -67,6 +67,13 @@
Serial.print("0");
}
Serial.println(address, HEX);
+ } else {
+ Serial.print("No I2C device found at address 0x");
+ if (address < 16) {
+ Serial.print("0");
+ }
+ Serial.println(address, HEX);
+
}
}
if (nDevices == 0) {
diff --git a/verilog/dv/arduino_i2c_scaner/arduino_i2c_scaner_tb.v b/verilog/dv/arduino_i2c_scaner/arduino_i2c_scaner_tb.v
index 98948a9..6cb6a4d 100644
--- a/verilog/dv/arduino_i2c_scaner/arduino_i2c_scaner_tb.v
+++ b/verilog/dv/arduino_i2c_scaner/arduino_i2c_scaner_tb.v
@@ -70,8 +70,11 @@
`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
`include "uart_agent.v"
`include "i2c_slave_model.v"
+`include "is62wvs1288.v"
-module arduino_i2c_scaner_tb;
+`define TB_HEX "arduino_i2c_scaner.hex"
+`define TB_TOP arduino_i2c_scaner_tb
+module `TB_TOP;
reg clock;
reg wb_rst_i;
reg power1, power2;
@@ -145,12 +148,13 @@
`ifdef WFDUMP
initial begin
$dumpfile("simx.vcd");
- $dumpvars(3, arduino_i2c_scaner_tb);
- $dumpvars(0, arduino_i2c_scaner_tb.u_top.u_riscv_top.i_core_top_0);
- $dumpvars(0, arduino_i2c_scaner_tb.u_top.u_riscv_top.u_connect);
- $dumpvars(0, arduino_i2c_scaner_tb.u_top.u_riscv_top.u_intf);
- $dumpvars(0, arduino_i2c_scaner_tb.u_top.u_uart_i2c_usb_spi.u_uart0_core);
- $dumpvars(0, arduino_i2c_scaner_tb.u_top.u_uart_i2c_usb_spi.u_i2cm);
+ $dumpvars(3, `TB_TOP);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top.i_core_top_0);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_connect);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_intf);
+ $dumpvars(0, `TB_TOP.u_top.u_uart_i2c_usb_spi.u_uart0_core);
+ $dumpvars(0, `TB_TOP.u_top.u_uart_i2c_usb_spi.u_i2cm);
+ $dumpvars(0, `TB_TOP.u_top.u_pinmux);
end
`endif
@@ -208,16 +212,16 @@
// Remove all the reset
if(d_risc_id == 0) begin
$display("STATUS: Working with Risc core 0");
- wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h11F);
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
end else if(d_risc_id == 1) begin
$display("STATUS: Working with Risc core 1");
- wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h21F);
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
end else if(d_risc_id == 2) begin
$display("STATUS: Working with Risc core 2");
- wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h41F);
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h41F);
end else if(d_risc_id == 3) begin
$display("STATUS: Working with Risc core 3");
- wb_user_core_write(`ADDR_SPACE_PINMUX+`PINMUX_GBL_CFG0,'h81F);
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h81F);
end
repeat (100) @(posedge clock); // wait for Processor Get Ready
@@ -227,6 +231,12 @@
tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity,
uart_stick_parity, uart_timeout, uart_divisor);
+ u_i2c_slave_0.debug = 0; // disable i2c bfm debug message
+ u_i2c_slave_1.debug = 0; // disable i2c bfm debug message
+ u_i2c_slave_2.debug = 0; // disable i2c bfm debug message
+ u_i2c_slave_3.debug = 0; // disable i2c bfm debug message
+ u_i2c_slave_4.debug = 0; // disable i2c bfm debug message
+
repeat (45000) @(posedge clock); // wait for Processor Get Ready
flag = 0;
check_sum = 0;
@@ -244,7 +254,7 @@
end
end
begin
- repeat (200000) @(posedge clock); // wait for Processor Get Ready
+ repeat (800000) @(posedge clock); // wait for Processor Get Ready
end
join_any
@@ -255,25 +265,24 @@
$display("Total Rx Char: %d Check Sum : %x ",uart_rx_nu, check_sum);
// Check
- // if all the 102 byte received
+ // if all the byte received
// if no error
- if(uart_rx_nu != 102) test_fail = 1;
- if(check_sum != 32'h1fab) test_fail = 1;
- if(tb_uart.err_cnt != 0) test_fail = 1;
+ if(uart_rx_nu != 1181) test_fail = 1;
+ if(check_sum != 32'h000170c9) test_fail = 1;
$display("###################################################");
if(test_fail == 0) begin
`ifdef GL
- $display("Monitor: Standalone String (GL) Passed");
+ $display("Monitor: Standalone i2c scanner (GL) Passed");
`else
- $display("Monitor: Standalone String (RTL) Passed");
+ $display("Monitor: Standalone i2c scanner (RTL) Passed");
`endif
end else begin
`ifdef GL
- $display("Monitor: Standalone String (GL) Failed");
+ $display("Monitor: Standalone i2c scanner (GL) Failed");
`else
- $display("Monitor: Standalone String (RTL) Failed");
+ $display("Monitor: Standalone i2c scanner (RTL) Failed");
`endif
end
$display("###################################################");
@@ -322,22 +331,45 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
+assign io_in[16] = 1'b0 ; // SPIS SCK
//---------------------------
// I2C
// --------------------------
tri scl,sda;
-assign sda = (io_oeb[22] == 1'b0) ? io_out[22] : 1'bz;
-assign scl = (io_oeb[23] == 1'b0) ? io_out[23]: 1'bz;
-assign io_in[22] = sda;
-assign io_in[23] = scl;
+assign sda = (io_oeb[26] == 1'b0) ? io_out[26] : 1'bz;
+assign scl = (io_oeb[27] == 1'b0) ? io_out[27]: 1'bz;
+assign io_in[26] = sda;
+assign io_in[27] = scl;
pullup p1(scl); // pullup scl line
pullup p2(sda); // pullup sda line
-i2c_slave_model #(.I2C_ADR(7'h4)) u_i2c_slave (
+i2c_slave_model #(.I2C_ADR(7'h4)) u_i2c_slave_0 (
+ .scl (scl),
+ .sda (sda)
+ );
+
+i2c_slave_model #(.I2C_ADR(7'h8)) u_i2c_slave_1 (
+ .scl (scl),
+ .sda (sda)
+ );
+
+i2c_slave_model #(.I2C_ADR(7'h10)) u_i2c_slave_2 (
+ .scl (scl),
+ .sda (sda)
+ );
+
+i2c_slave_model #(.I2C_ADR(7'h11)) u_i2c_slave_3 (
+ .scl (scl),
+ .sda (sda)
+ );
+
+i2c_slave_model #(.I2C_ADR(7'h13)) u_i2c_slave_4 (
.scl (scl),
.sda (sda)
);
@@ -354,26 +386,26 @@
// user core using the gpio pads
// ----------------------------------------------------
- wire flash_clk = io_out[24];
- wire flash_csb = io_out[25];
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
// Creating Pad Delay
- wire #1 io_oeb_29 = io_oeb[29];
- wire #1 io_oeb_30 = io_oeb[30];
- wire #1 io_oeb_31 = io_oeb[31];
- wire #1 io_oeb_32 = io_oeb[32];
- tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
- tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
- tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
- tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
- assign io_in[29] = flash_io0;
- assign io_in[30] = flash_io1;
- assign io_in[31] = flash_io2;
- assign io_in[32] = flash_io3;
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
// Quard flash
- s25fl256s #(.mem_file_name("arduino_i2c_scaner.ino.hex"),
- .otp_file_name("none"),
+ s25fl256s #(.mem_file_name(`TB_HEX),
+ .otp_file_name("none"),
.TimingModel("S25FL512SAGMFI010_F_30pF"))
u_spi_flash_256mb (
// Data Inputs/Outputs
@@ -388,14 +420,27 @@
);
+ wire spiram_csb = io_out[31];
+
+ is62wvs1288 #(.mem_file_name("none"))
+ u_sram (
+ // Data Inputs/Outputs
+ .io0 (flash_io0),
+ .io1 (flash_io1),
+ // Controls
+ .clk (flash_clk),
+ .csb (spiram_csb),
+ .io2 (flash_io2),
+ .io3 (flash_io3)
+ );
//---------------------------
// UART Agent integration
// --------------------------
wire uart_txd,uart_rxd;
-assign uart_txd = io_out[2];
-assign io_in[1] = uart_rxd ;
+assign uart_txd = io_out[7];
+assign io_in[6] = uart_rxd ;
uart_agent tb_uart(
.mclk (clock ),
diff --git a/verilog/dv/arduino_i2c_wr_rd/Makefile b/verilog/dv/arduino_i2c_wr_rd/Makefile
new file mode 100644
index 0000000..b868513
--- /dev/null
+++ b/verilog/dv/arduino_i2c_wr_rd/Makefile
@@ -0,0 +1,141 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+
+# ---- Include Partitioned Makefiles ----
+
+CONFIG = caravel_user_project
+
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+
+DESIGNS?=../../..
+TOOLS?=/opt/riscv32i/
+
+export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
+export RISCDUINO_BOARD ?= $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
+## YIFIVE FIRMWARE
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+GCC_PREFIX?=riscv32-unknown-elf
+
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+DUMP?=OFF
+RISC_CORE?=0
+
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
+.SUFFIXES:
+
+PATTERN = arduino_i2c_wr_rd
+
+all: ${PATTERN:=.vcd}
+
+
+vvp: ${PATTERN:=.vvp}
+
+%.vvp: %_tb.v
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard -I${RISCDUINO_BOARD}/libraries/Wire/src ${PATTERN}.ino.cpp -o ${PATTERN}.ino.cpp.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard -I${RISCDUINO_BOARD}/libraries/Wire/src -I${RISCDUINO_BOARD}/libraries/Wire/src/utility ${RISCDUINO_BOARD}/libraries/Wire/src/Wire.cpp -o Wire.cpp.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/Print.cpp -o Print.cpp.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WMath.cpp -o WMath.cpp.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WString.cpp -o WString.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WInterrupts.c -o WInterrupts.c.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/fe300prci/fe300prci_driver.c -o fe300prci_driver.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/abi.cpp -o abi.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/plic/plic_driver.c -o plic_driver.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/UARTClass.cpp -o UARTClass.cpp.o
+ ${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/entry.S -o entry.S.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/hooks.c -o hooks.c.o
+ ${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/init.S -o init.S.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/itoa.c -o itoa.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/main.cpp -o main.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/malloc.c -o malloc.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/new.cpp -o new.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/sbrk.c -o sbrk.c.o
+ ${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/start.S -o start.S.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring.c -o wiring.c.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_analog.c -o wiring_analog.c.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_digital.c -o wiring_digital.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_pulse.cpp -o wiring_pulse.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_shift.c -o wiring_shift.c.o
+ ${GCC_PREFIX}-ar rcs core.a Print.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a UARTClass.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a WInterrupts.c.o
+ ${GCC_PREFIX}-ar rcs core.a WMath.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a WString.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a abi.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a fe300prci_driver.c.o
+ ${GCC_PREFIX}-ar rcs core.a plic_driver.c.o
+ ${GCC_PREFIX}-ar rcs core.a entry.S.o
+ ${GCC_PREFIX}-ar rcs core.a hooks.c.o
+ ${GCC_PREFIX}-ar rcs core.a init.S.o
+ ${GCC_PREFIX}-ar rcs core.a itoa.c.o
+ ${GCC_PREFIX}-ar rcs core.a main.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a malloc.c.o
+ ${GCC_PREFIX}-ar rcs core.a new.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a sbrk.c.o
+ ${GCC_PREFIX}-ar rcs core.a start.S.o
+ ${GCC_PREFIX}-ar rcs core.a wiring.c.o
+ ${GCC_PREFIX}-ar rcs core.a wiring_analog.c.o
+ ${GCC_PREFIX}-ar rcs core.a wiring_digital.c.o
+ ${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
+ ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o Wire.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.elf
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.elf ${PATTERN}.bin
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.elf ${PATTERN}.hex
+ ${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
+ rm *.o *.a
+ifeq ($(SIM),RTL)
+ ifeq ($(DUMP),OFF)
+ iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
+ $< -o $@
+ else
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
+ $< -o $@
+ endif
+else
+ ifeq ($(DUMP),OFF)
+ iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+ $< -o $@
+ else
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+ $< -o $@
+ endif
+endif
+
+%.vcd: %.vvp
+ vvp $< +risc_core_id=$(RISC_CORE)
+
+
+# ---- Clean ----
+
+clean:
+ rm -f *.elf *.hex *.bin *.vvp *.vcd *.log *.dump *.a *.o
+
+.PHONY: clean hex all
diff --git a/verilog/dv/arduino_i2c_wr_rd/arduino_i2c_wr_rd.ino b/verilog/dv/arduino_i2c_wr_rd/arduino_i2c_wr_rd.ino
new file mode 100644
index 0000000..158e3f1
--- /dev/null
+++ b/verilog/dv/arduino_i2c_wr_rd/arduino_i2c_wr_rd.ino
@@ -0,0 +1,50 @@
+// --------------------------------------
+// I2C Write and Reading to Memory
+// https://microchipdeveloper.com/i2c:sequential-read
+// --------------------------------------
+
+#include <Wire.h>
+
+void setup() {
+ Wire.begin();
+
+ Serial.begin(9600);
+ while (!Serial); // Leonardo: wait for Serial Monitor
+ Serial.println("\nI2C Write Read");
+}
+
+void loop() {
+
+ // step 1: instruct sensor to read echoes
+ Wire.beginTransmission(0x4); // transmit to device #4 (0x0x4)
+ Wire.write(byte(0x02)); // sets memory pointer (0x02)
+ Wire.write(byte(0x11)); // Write Location-0: 0x11
+ Wire.write(byte(0x22)); // Write Location-0: 0x22
+ Wire.write(byte(0x33)); // Write Location-0: 0x33
+ Wire.write(byte(0x44)); // Write Location-0: 0x44
+ Wire.write(byte(0x55)); // Write Location-0: 0x55
+ Wire.write(byte(0x66)); // Write Location-0: 0x66
+ Wire.write(byte(0x77)); // Write Location-0: 0x77
+ Wire.write(byte(0x88)); // Write Location-0: 0x88
+ Wire.endTransmission(); // stop transmitting
+
+ // step 2: Reset the the memory pointer
+ Wire.beginTransmission(0x4); // transmit to device #4 (0x4)
+ Wire.write(byte(0x02)); // sets memory pointer (0x02)
+ Wire.endTransmission(); // stop transmitting
+
+ // step 3: request reading from sensor
+ Wire.requestFrom(0x4, 8); // request 8 bytes from slave device #4
+
+ // step 4: receive reading from sensor
+
+ Serial.println("\nRead Back Data:");
+ while(Wire.available()) // slave may send less than requested
+ {
+ char c = Wire.read(); // receive a byte as character
+ Serial.println(c,HEX); // print the character
+ }
+
+
+ delay(5000); // Wait 5 seconds for next scan
+}
diff --git a/verilog/dv/arduino_i2c_wr_rd/arduino_i2c_wr_rd.ino.cpp b/verilog/dv/arduino_i2c_wr_rd/arduino_i2c_wr_rd.ino.cpp
new file mode 100644
index 0000000..92e1de1
--- /dev/null
+++ b/verilog/dv/arduino_i2c_wr_rd/arduino_i2c_wr_rd.ino.cpp
@@ -0,0 +1,94 @@
+// --------------------------------------
+// I2C Write and Reading to Memory
+// https://microchipdeveloper.com/i2c:sequential-read
+// --------------------------------------
+#include <Arduino.h>
+
+#include <Wire.h>
+
+void setup();
+void loop();
+void setup() {
+ Wire.begin();
+
+ Serial.begin(1152000);
+ while (!Serial); // Leonardo: wait for Serial Monitor
+ Serial.println("\nI2C Write Read");
+}
+
+void loop() {
+
+ //-----------------------------
+ // Write & Read to Device #4
+ //------------------------------
+ // step 1: instruct sensor to read echoes
+ Wire.beginTransmission(0x4); // transmit to device #4 (0x0x4)
+ Wire.write(byte(0x02)); // sets memory pointer (0x02)
+ Wire.write(byte(0x11)); // Write Location-0: 0x11
+ Wire.write(byte(0x22)); // Write Location-0: 0x22
+ Wire.write(byte(0x33)); // Write Location-0: 0x33
+ Wire.write(byte(0x44)); // Write Location-0: 0x44
+ Wire.write(byte(0x55)); // Write Location-0: 0x55
+ Wire.write(byte(0x66)); // Write Location-0: 0x66
+ Wire.write(byte(0x77)); // Write Location-0: 0x77
+ Wire.write(byte(0x88)); // Write Location-0: 0x88
+ Wire.endTransmission(); // stop transmitting
+
+ // step 2: Reset the the memory pointer
+ Wire.beginTransmission(0x4); // transmit to device #4 (0x4)
+ Wire.write(byte(0x02)); // sets memory pointer (0x02)
+ Wire.endTransmission(); // stop transmitting
+
+ // step 3: request reading from sensor
+ Wire.requestFrom(0x4, 8); // request 8 bytes from slave device #4
+ Wire.available();
+
+ // step 4: receive reading from sensor
+
+ Serial.println("Read Back Data from Port-0x04:");
+ while(Wire.available()) // slave may send less than requested
+ {
+ uint8_t c = Wire.read(); // receive a byte as character
+ Serial.println(c,HEX); // print the character
+ }
+ Wire.endTransmission(); // stop transmitting
+
+ //-----------------------------
+ // Write & Read to Device #4
+ //------------------------------
+ // step 1: instruct sensor to read echoes
+ Wire.beginTransmission(0x10); // transmit to device #10 (0x10)
+ Wire.write(byte(0x20)); // sets memory pointer (0x20)
+ Wire.write(byte(0x01)); // Write Location-0: 0x11
+ Wire.write(byte(0x02)); // Write Location-0: 0x22
+ Wire.write(byte(0x03)); // Write Location-0: 0x33
+ Wire.write(byte(0x04)); // Write Location-0: 0x44
+ Wire.write(byte(0x05)); // Write Location-0: 0x55
+ Wire.write(byte(0x06)); // Write Location-0: 0x66
+ Wire.write(byte(0x07)); // Write Location-0: 0x77
+ Wire.write(byte(0x08)); // Write Location-0: 0x88
+ Wire.endTransmission(); // stop transmitting
+
+
+ // step 2: Reset the the memory pointer
+ Wire.beginTransmission(0x10); // transmit to device #10 (0x10)
+ Wire.write(byte(0x20)); // sets memory pointer (0x10)
+ Wire.endTransmission(); // stop transmitting
+
+ // step 3: request reading from sensor
+ Wire.requestFrom(0x10, 8); // request 8 bytes from slave device #4
+ Wire.available();
+
+ // step 4: receive reading from sensor
+
+ Serial.println("\nRead Back Data from Port-0x10:");
+ while(Wire.available()) // slave may send less than requested
+ {
+ uint8_t c = Wire.read(); // receive a byte as character
+ Serial.println(c,HEX); // print the character
+ }
+ Wire.endTransmission(); // stop transmitting
+
+ delay(5000); // Wait 5 seconds for next scan
+}
+
diff --git a/verilog/dv/arduino_i2c_wr_rd/arduino_i2c_wr_rd_tb.v b/verilog/dv/arduino_i2c_wr_rd/arduino_i2c_wr_rd_tb.v
new file mode 100644
index 0000000..ee7124a
--- /dev/null
+++ b/verilog/dv/arduino_i2c_wr_rd/arduino_i2c_wr_rd_tb.v
@@ -0,0 +1,565 @@
+////////////////////////////////////////////////////////////////////////////
+// SPDX-FileCopyrightText: 2021 , Dinesh Annayya
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+// SPDX-FileContributor: Modified by Dinesh Annayya <dinesha@opencores.org>
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Standalone User validation Test bench ////
+//// ////
+//// This file is part of the riscdunio cores project ////
+//// https://github.com/dineshannayya/riscdunio.git ////
+//// ////
+//// Description ////
+//// This is a standalone test bench to validate the ////
+//// Digital core. ////
+//// This test bench to valid Arduino example: ////
+//// <example><Wire><i2c_scanner> ////
+//// ////
+//// To Do: ////
+//// nothing ////
+//// ////
+//// Author(s): ////
+//// - Dinesh Annayya, dinesh.annayya@gmail.com ////
+//// ////
+//// Revision : ////
+//// 0.1 - 29th July 2022, Dinesh A ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2000 Authors and OPENCORES.ORG ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+
+`default_nettype wire
+
+`timescale 1 ns / 1 ns
+
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
+`include "is62wvs1288.v"
+`include "uart_agent.v"
+`include "i2c_slave_model.v"
+
+`define TB_HEX "arduino_i2c_wr_rd.hex"
+`define TB_TOP arduino_i2c_wr_rd_tb
+module `TB_TOP;
+ reg clock;
+ reg wb_rst_i;
+ reg power1, power2;
+ reg power3, power4;
+
+ reg wbd_ext_cyc_i; // strobe/request
+ reg wbd_ext_stb_i; // strobe/request
+ reg [31:0] wbd_ext_adr_i; // address
+ reg wbd_ext_we_i; // write
+ reg [31:0] wbd_ext_dat_i; // data output
+ reg [3:0] wbd_ext_sel_i; // byte enable
+
+ wire [31:0] wbd_ext_dat_o; // data input
+ wire wbd_ext_ack_o; // acknowlegement
+ wire wbd_ext_err_o; // error
+
+ // User I/O
+ wire [37:0] io_oeb;
+ wire [37:0] io_out;
+ wire [37:0] io_in;
+
+ wire gpio;
+ wire [37:0] mprj_io;
+ wire [7:0] mprj_io_0;
+ reg test_fail;
+ reg [31:0] read_data;
+ //----------------------------------
+ // Uart Configuration
+ // ---------------------------------
+ reg [1:0] uart_data_bit ;
+ reg uart_stop_bits ; // 0: 1 stop bit; 1: 2 stop bit;
+ reg uart_stick_parity ; // 1: force even parity
+ reg uart_parity_en ; // parity enable
+ reg uart_even_odd_parity ; // 0: odd parity; 1: even parity
+
+ reg [7:0] uart_data ;
+ reg [15:0] uart_divisor ; // divided by n * 16
+ reg [15:0] uart_timeout ;// wait time limit
+
+ reg [15:0] uart_rx_nu ;
+ reg [15:0] uart_tx_nu ;
+ reg [7:0] uart_write_data [0:39];
+ reg uart_fifo_enable ; // fifo mode disable
+ reg flag ;
+ reg compare_start ; // User Need to make sure that compare start match with RiscV core completing initial booting
+
+ reg [31:0] check_sum ;
+
+ integer d_risc_id;
+
+ integer i,j;
+
+
+
+
+ // 50Mhz CLock
+ always #10 clock <= (clock === 1'b0);
+
+ initial begin
+ clock = 0;
+ flag = 0;
+ compare_start = 0;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ end
+
+ `ifdef WFDUMP
+ initial begin
+ $dumpfile("simx.vcd");
+ $dumpvars(3, `TB_TOP);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top.i_core_top_0);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_connect);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_intf);
+ $dumpvars(0, `TB_TOP.u_top.u_uart_i2c_usb_spi.u_uart0_core);
+ $dumpvars(0, `TB_TOP.u_top.u_uart_i2c_usb_spi.u_i2cm);
+ $dumpvars(0, `TB_TOP.u_top.u_pinmux);
+ end
+ `endif
+
+ /*************************************************************************
+ * This is Baud Rate to clock divider conversion for Test Bench
+ * Note: DUT uses 16x baud clock, where are test bench uses directly
+ * baud clock, Due to 16x Baud clock requirement at RTL, there will be
+ * some resolution loss, we expect at lower baud rate this resolution
+ * loss will be less. For Quick simulation perpose higher baud rate used
+ * *************************************************************************/
+ task tb_set_uart_baud;
+ input [31:0] ref_clk;
+ input [31:0] baud_rate;
+ output [31:0] baud_div;
+ reg [31:0] baud_div;
+ begin
+ // for 230400 Baud = (50Mhz/230400) = 216.7
+ baud_div = ref_clk/baud_rate; // Get the Bit Baud rate
+ // Baud 16x = 216/16 = 13
+ baud_div = baud_div/16; // To find the RTL baud 16x div value to find similar resolution loss in test bench
+ // Test bench baud clock , 16x of above value
+ // 13 * 16 = 208,
+ // (Note if you see original value was 216, now it's 208 )
+ baud_div = baud_div * 16;
+ // Test bench half cycle counter to toggle it
+ // 208/2 = 104
+ baud_div = baud_div/2;
+ //As counter run's from 0 , substract from 1
+ baud_div = baud_div-1;
+ end
+ endtask
+
+
+ initial begin
+ uart_data_bit = 2'b11;
+ uart_stop_bits = 0; // 0: 1 stop bit; 1: 2 stop bit;
+ uart_stick_parity = 0; // 1: force even parity
+ uart_parity_en = 0; // parity enable
+ uart_even_odd_parity = 1; // 0: odd parity; 1: even parity
+ tb_set_uart_baud(50000000,1152000,uart_divisor);// 50Mhz Ref clock, Baud Rate: 230400
+ uart_timeout = 20000;// wait time limit
+ uart_fifo_enable = 0; // fifo mode disable
+
+ $value$plusargs("risc_core_id=%d", d_risc_id);
+
+ #200; // Wait for reset removal
+ repeat (10) @(posedge clock);
+ $display("Monitor: Standalone User Risc Boot Test Started");
+
+ // Remove Wb Reset
+ wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+
+ repeat (2) @(posedge clock);
+ #1;
+ // Remove all the reset
+ if(d_risc_id == 0) begin
+ $display("STATUS: Working with Risc core 0");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+ end else if(d_risc_id == 1) begin
+ $display("STATUS: Working with Risc core 1");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
+ end else if(d_risc_id == 2) begin
+ $display("STATUS: Working with Risc core 2");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h41F);
+ end else if(d_risc_id == 3) begin
+ $display("STATUS: Working with Risc core 3");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h81F);
+ end
+
+ repeat (100) @(posedge clock); // wait for Processor Get Ready
+
+ tb_uart.debug_mode = 0; // disable debug display
+ tb_uart.uart_init;
+ tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity,
+ uart_stick_parity, uart_timeout, uart_divisor);
+
+ u_i2c_slave_0.debug = 1; // disable i2c bfm debug message
+ u_i2c_slave_1.debug = 1; // disable i2c bfm debug message
+
+ repeat (45000) @(posedge clock); // wait for Processor Get Ready
+ flag = 0;
+ check_sum = 0;
+ compare_start = 1;
+
+ fork
+ begin
+ while(flag == 0)
+ begin
+ tb_uart.read_char(read_data,flag);
+ if(flag == 0) begin
+ $write ("%c",read_data);
+ check_sum = check_sum+read_data;
+ end
+ end
+ end
+ begin
+ repeat (250000) @(posedge clock); // wait for Processor Get Ready
+ end
+ join_any
+
+ #100
+ tb_uart.report_status(uart_rx_nu, uart_tx_nu);
+
+ test_fail = 0;
+
+ $display("Total Rx Char: %d Check Sum : %x ",uart_rx_nu, check_sum);
+ // Check
+ // if all the byte received
+ // if no error
+ if(uart_rx_nu != 138) test_fail = 1;
+ if(check_sum != 32'h00001e9d) test_fail = 1;
+
+
+ $display("###################################################");
+ if(test_fail == 0) begin
+ `ifdef GL
+ $display("Monitor: Standalone i2c scanner (GL) Passed");
+ `else
+ $display("Monitor: Standalone i2c scanner (RTL) Passed");
+ `endif
+ end else begin
+ `ifdef GL
+ $display("Monitor: Standalone i2c scanner (GL) Failed");
+ `else
+ $display("Monitor: Standalone i2c scanner (RTL) Failed");
+ `endif
+ end
+ $display("###################################################");
+ $finish;
+ end
+
+ initial begin
+ wb_rst_i <= 1'b1;
+ #100;
+ wb_rst_i <= 1'b0; // Release reset
+ end
+wire USER_VDD1V8 = 1'b1;
+wire VSS = 1'b0;
+
+user_project_wrapper u_top(
+`ifdef USE_POWER_PINS
+ .vccd1(USER_VDD1V8), // User area 1 1.8V supply
+ .vssd1(VSS), // User area 1 digital ground
+`endif
+ .wb_clk_i (clock), // System clock
+ .user_clock2 (1'b1), // Real-time clock
+ .wb_rst_i (wb_rst_i), // Regular Reset signal
+
+ .wbs_cyc_i (wbd_ext_cyc_i), // strobe/request
+ .wbs_stb_i (wbd_ext_stb_i), // strobe/request
+ .wbs_adr_i (wbd_ext_adr_i), // address
+ .wbs_we_i (wbd_ext_we_i), // write
+ .wbs_dat_i (wbd_ext_dat_i), // data output
+ .wbs_sel_i (wbd_ext_sel_i), // byte enable
+
+ .wbs_dat_o (wbd_ext_dat_o), // data input
+ .wbs_ack_o (wbd_ext_ack_o), // acknowlegement
+
+
+ // Logic Analyzer Signals
+ .la_data_in ('1) ,
+ .la_data_out (),
+ .la_oenb ('0),
+
+
+ // IOs
+ .io_in (io_in) ,
+ .io_out (io_out) ,
+ .io_oeb (io_oeb) ,
+
+ .user_irq ()
+
+);
+// SSPI Slave I/F
+assign io_in[5] = 1'b1; // RESET
+
+//---------------------------
+// I2C
+// --------------------------
+tri scl,sda;
+
+assign sda = (io_oeb[26] == 1'b0) ? io_out[26] : 1'bz;
+assign scl = (io_oeb[27] == 1'b0) ? io_out[27]: 1'bz;
+assign io_in[26] = sda;
+assign io_in[27] = scl;
+
+pullup p1(scl); // pullup scl line
+pullup p2(sda); // pullup sda line
+
+
+i2c_slave_model #(.I2C_ADR(7'h4)) u_i2c_slave_0 (
+ .scl (scl),
+ .sda (sda)
+ );
+
+i2c_slave_model #(.I2C_ADR(7'h10)) u_i2c_slave_1 (
+ .scl (scl),
+ .sda (sda)
+ );
+
+`ifndef GL // Drive Power for Hold Fix Buf
+ // All standard cell need power hook-up for functionality work
+ initial begin
+
+ end
+`endif
+
+//------------------------------------------------------
+// Integrate the Serial flash with qurd support to
+// user core using the gpio pads
+// ----------------------------------------------------
+
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
+ // Creating Pad Delay
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
+
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
+
+ // Quard flash
+ s25fl256s #(.mem_file_name(`TB_HEX),
+ .otp_file_name("none"),
+ .TimingModel("S25FL512SAGMFI010_F_30pF"))
+ u_spi_flash_256mb (
+ // Data Inputs/Outputs
+ .SI (flash_io0),
+ .SO (flash_io1),
+ // Controls
+ .SCK (flash_clk),
+ .CSNeg (flash_csb),
+ .WPNeg (flash_io2),
+ .HOLDNeg (flash_io3),
+ .RSTNeg (!wb_rst_i)
+
+ );
+
+ wire spiram_csb = io_out[31];
+
+ is62wvs1288 #(.mem_file_name("none"))
+ u_sram (
+ // Data Inputs/Outputs
+ .io0 (flash_io0),
+ .io1 (flash_io1),
+ // Controls
+ .clk (flash_clk),
+ .csb (spiram_csb),
+ .io2 (flash_io2),
+ .io3 (flash_io3)
+ );
+
+//-------------------------------------
+//---------------------------
+// UART Agent integration
+// --------------------------
+wire uart_txd,uart_rxd;
+
+assign uart_txd = io_out[7];
+assign io_in[6] = uart_rxd ;
+
+uart_agent tb_uart(
+ .mclk (clock ),
+ .txd (uart_rxd ),
+ .rxd (uart_txd )
+ );
+
+
+task wb_user_core_write;
+input [31:0] address;
+input [31:0] data;
+begin
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_adr_i =address; // address
+ wbd_ext_we_i ='h1; // write
+ wbd_ext_dat_i =data; // data output
+ wbd_ext_sel_i ='hF; // byte enable
+ wbd_ext_cyc_i ='h1; // strobe/request
+ wbd_ext_stb_i ='h1; // strobe/request
+ wait(wbd_ext_ack_o == 1);
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
+ repeat (2) @(posedge clock);
+end
+endtask
+
+task wb_user_core_read;
+input [31:0] address;
+output [31:0] data;
+reg [31:0] data;
+begin
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_adr_i =address; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='0; // data output
+ wbd_ext_sel_i ='hF; // byte enable
+ wbd_ext_cyc_i ='h1; // strobe/request
+ wbd_ext_stb_i ='h1; // strobe/request
+ wait(wbd_ext_ack_o == 1);
+ repeat (1) @(negedge clock);
+ data = wbd_ext_dat_o;
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
+ repeat (2) @(posedge clock);
+end
+endtask
+
+task wb_user_core_read_check;
+input [31:0] address;
+output [31:0] data;
+input [31:0] cmp_data;
+reg [31:0] data;
+begin
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_adr_i =address; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='0; // data output
+ wbd_ext_sel_i ='hF; // byte enable
+ wbd_ext_cyc_i ='h1; // strobe/request
+ wbd_ext_stb_i ='h1; // strobe/request
+ wait(wbd_ext_ack_o == 1);
+ repeat (1) @(negedge clock);
+ data = wbd_ext_dat_o;
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ if(data !== cmp_data) begin
+ $display("ERROR : WB USER ACCESS READ Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
+ test_fail = 1;
+ end else begin
+ $display("STATUS: WB USER ACCESS READ Address : 0x%x, Data : 0x%x",address,data);
+ end
+ repeat (2) @(posedge clock);
+end
+endtask
+
+`ifdef GL
+
+wire wbd_spi_stb_i = u_top.u_qspi_master.wbd_stb_i;
+wire wbd_spi_ack_o = u_top.u_qspi_master.wbd_ack_o;
+wire wbd_spi_we_i = u_top.u_qspi_master.wbd_we_i;
+wire [31:0] wbd_spi_adr_i = u_top.u_qspi_master.wbd_adr_i;
+wire [31:0] wbd_spi_dat_i = u_top.u_qspi_master.wbd_dat_i;
+wire [31:0] wbd_spi_dat_o = u_top.u_qspi_master.wbd_dat_o;
+wire [3:0] wbd_spi_sel_i = u_top.u_qspi_master.wbd_sel_i;
+
+wire wbd_uart_stb_i = u_top.u_uart_i2c_usb_spi.reg_cs;
+wire wbd_uart_ack_o = u_top.u_uart_i2c_usb_spi.reg_ack;
+wire wbd_uart_we_i = u_top.u_uart_i2c_usb_spi.reg_wr;
+wire [8:0] wbd_uart_adr_i = u_top.u_uart_i2c_usb_spi.reg_addr;
+wire [7:0] wbd_uart_dat_i = u_top.u_uart_i2c_usb_spi.reg_wdata;
+wire [7:0] wbd_uart_dat_o = u_top.u_uart_i2c_usb_spi.reg_rdata;
+wire wbd_uart_sel_i = u_top.u_uart_i2c_usb_spi.reg_be;
+
+`endif
+
+/**
+`ifdef GL
+//-----------------------------------------------------------------------------
+// RISC IMEM amd DMEM Monitoring TASK
+//-----------------------------------------------------------------------------
+
+`define RISC_CORE user_uart_tb.u_top.u_core.u_riscv_top
+
+always@(posedge `RISC_CORE.wb_clk) begin
+ if(`RISC_CORE.wbd_imem_ack_i)
+ $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
+ if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
+ $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
+ if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
+ $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
+end
+
+`endif
+**/
+endmodule
+`include "s25fl256s.sv"
+`default_nettype wire
diff --git a/verilog/dv/arduino_multi_serial/Makefile b/verilog/dv/arduino_multi_serial/Makefile
index 8c1fa01..d0899fd 100644
--- a/verilog/dv/arduino_multi_serial/Makefile
+++ b/verilog/dv/arduino_multi_serial/Makefile
@@ -97,10 +97,10 @@
${GCC_PREFIX}-ar rcs core.a wiring_digital.c.o
${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
- ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.ino.elf
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.ino.elf ${PATTERN}.ino.bin
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.ino.elf ${PATTERN}.ino.hex
- ${GCC_PREFIX}-objdump -D ${PATTERN}.ino.elf > ${PATTERN}.ino.dump
+ ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.elf
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.elf ${PATTERN}.bin
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.elf ${PATTERN}.hex
+ ${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
rm *.o *.a
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
diff --git a/verilog/dv/arduino_multi_serial/arduino_multi_serial_tb.v b/verilog/dv/arduino_multi_serial/arduino_multi_serial_tb.v
index 6ad86a1..8cfeed9 100644
--- a/verilog/dv/arduino_multi_serial/arduino_multi_serial_tb.v
+++ b/verilog/dv/arduino_multi_serial/arduino_multi_serial_tb.v
@@ -69,9 +69,12 @@
`timescale 1 ns / 1 ns
`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
+`include "is62wvs1288.v"
`include "uart_agent.v"
-module arduino_multi_serial_tb;
+`define TB_HEX "arduino_multi_serial.hex"
+`define TB_TOP arduino_multi_serial_tb
+module `TB_TOP;
reg clock;
reg wb_rst_i;
reg power1, power2;
@@ -144,12 +147,12 @@
`ifdef WFDUMP
initial begin
$dumpfile("simx.vcd");
- $dumpvars(3, arduino_multi_serial_tb);
- //$dumpvars(0, arduino_multi_serial_tb.u_top.u_riscv_top.i_core_top_0);
- //$dumpvars(0, arduino_multi_serial_tb.u_top.u_riscv_top.u_connect);
- //$dumpvars(0, arduino_multi_serial_tb.u_top.u_riscv_top.u_intf);
- $dumpvars(0, arduino_multi_serial_tb.u_top.u_uart_i2c_usb_spi.u_uart0_core);
- $dumpvars(0, arduino_multi_serial_tb.u_top.u_uart_i2c_usb_spi.u_uart1_core);
+ $dumpvars(3, `TB_TOP);
+ //$dumpvars(0, `TB_TOP.u_top.u_riscv_top.i_core_top_0);
+ //$dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_connect);
+ //$dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_intf);
+ $dumpvars(0, `TB_TOP.u_top.u_uart_i2c_usb_spi.u_uart0_core);
+ $dumpvars(0, `TB_TOP.u_top.u_uart_i2c_usb_spi.u_uart1_core);
end
`endif
@@ -348,6 +351,9 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
+assign io_in[16] = 1'b0 ; // SPIS SCK
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
@@ -361,25 +367,25 @@
// user core using the gpio pads
// ----------------------------------------------------
- wire flash_clk = io_out[24];
- wire flash_csb = io_out[25];
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
// Creating Pad Delay
- wire #1 io_oeb_29 = io_oeb[29];
- wire #1 io_oeb_30 = io_oeb[30];
- wire #1 io_oeb_31 = io_oeb[31];
- wire #1 io_oeb_32 = io_oeb[32];
- tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
- tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
- tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
- tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
- assign io_in[29] = flash_io0;
- assign io_in[30] = flash_io1;
- assign io_in[31] = flash_io2;
- assign io_in[32] = flash_io3;
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
// Quard flash
- s25fl256s #(.mem_file_name("arduino_multi_serial.ino.hex"),
+ s25fl256s #(.mem_file_name(`TB_HEX),
.otp_file_name("none"),
.TimingModel("S25FL512SAGMFI010_F_30pF"))
u_spi_flash_256mb (
@@ -395,14 +401,26 @@
);
+ wire spiram_csb = io_out[31];
+ is62wvs1288 #(.mem_file_name("none"))
+ u_sram (
+ // Data Inputs/Outputs
+ .io0 (flash_io0),
+ .io1 (flash_io1),
+ // Controls
+ .clk (flash_clk),
+ .csb (spiram_csb),
+ .io2 (flash_io2),
+ .io3 (flash_io3)
+ );
//---------------------------
// UART-0 Agent integration
// --------------------------
wire uart0_txd,uart0_rxd;
-assign uart0_txd = io_out[2];
-assign io_in[1] = uart0_rxd ;
+assign uart0_txd = io_out[7];
+assign io_in[6] = uart0_rxd ;
uart_agent tb_uart0(
.mclk (clock ),
@@ -415,8 +433,8 @@
// --------------------------
wire uart1_txd,uart1_rxd;
-assign uart1_txd = io_out[5];
-assign io_in[3] = uart1_rxd ;
+assign uart1_txd = io_out[10];
+assign io_in[8] = uart1_rxd ;
uart_agent tb_uart1(
.mclk (clock ),
diff --git a/verilog/dv/arduino_risc_boot/Makefile b/verilog/dv/arduino_risc_boot/Makefile
index 5c074b3..68dd9fc 100644
--- a/verilog/dv/arduino_risc_boot/Makefile
+++ b/verilog/dv/arduino_risc_boot/Makefile
@@ -97,10 +97,10 @@
${GCC_PREFIX}-ar rcs core.a wiring_digital.c.o
${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
- ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.ino.elf
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.ino.elf ${PATTERN}.ino.bin
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.ino.elf ${PATTERN}.ino.hex
- ${GCC_PREFIX}-objdump -D ${PATTERN}.ino.elf > ${PATTERN}.ino.dump
+ ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.elf
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.elf ${PATTERN}.bin
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.elf ${PATTERN}.hex
+ ${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
rm *.o *.a
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
diff --git a/verilog/dv/arduino_risc_boot/arduino_risc_boot_tb.v b/verilog/dv/arduino_risc_boot/arduino_risc_boot_tb.v
index 0349606..eb4d0d0 100644
--- a/verilog/dv/arduino_risc_boot/arduino_risc_boot_tb.v
+++ b/verilog/dv/arduino_risc_boot/arduino_risc_boot_tb.v
@@ -67,7 +67,12 @@
`timescale 1 ns / 1 ns
`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
-module arduino_risc_boot_tb;
+`include "is62wvs1288.v"
+
+`define TB_HEX "arduino_risc_boot.hex"
+`define TB_TOP arduino_risc_boot_tb
+
+module `TB_TOP;
reg clock;
reg wb_rst_i;
reg power1, power2;
@@ -117,7 +122,7 @@
`ifdef WFDUMP
initial begin
$dumpfile("simx.vcd");
- $dumpvars(3, arduino_risc_boot_tb);
+ $dumpvars(3, `TB_TOP);
end
`endif
@@ -231,6 +236,9 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
+assign io_in[16] = 1'b0 ; // SPIS SCK
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
@@ -244,25 +252,25 @@
// user core using the gpio pads
// ----------------------------------------------------
- wire flash_clk = io_out[24];
- wire flash_csb = io_out[25];
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
// Creating Pad Delay
- wire #1 io_oeb_29 = io_oeb[29];
- wire #1 io_oeb_30 = io_oeb[30];
- wire #1 io_oeb_31 = io_oeb[31];
- wire #1 io_oeb_32 = io_oeb[32];
- tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
- tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
- tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
- tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
- assign io_in[29] = flash_io0;
- assign io_in[30] = flash_io1;
- assign io_in[31] = flash_io2;
- assign io_in[32] = flash_io3;
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
// Quard flash
- s25fl256s #(.mem_file_name("arduino_risc_boot.ino.hex"),
+ s25fl256s #(.mem_file_name(`TB_HEX),
.otp_file_name("none"),
.TimingModel("S25FL512SAGMFI010_F_30pF"))
u_spi_flash_256mb (
@@ -278,6 +286,22 @@
);
+ wire spiram_csb = io_out[31];
+
+ is62wvs1288 #(.mem_file_name("none"))
+ u_sram (
+ // Data Inputs/Outputs
+ .io0 (flash_io0),
+ .io1 (flash_io1),
+ // Controls
+ .clk (flash_clk),
+ .csb (spiram_csb),
+ .io2 (flash_io2),
+ .io3 (flash_io3)
+ );
+
+//-------------------------------------
+
diff --git a/verilog/dv/arduino_string/Makefile b/verilog/dv/arduino_string/Makefile
index 78fc16e..bf750df 100644
--- a/verilog/dv/arduino_string/Makefile
+++ b/verilog/dv/arduino_string/Makefile
@@ -97,10 +97,10 @@
${GCC_PREFIX}-ar rcs core.a wiring_digital.c.o
${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
- ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.ino.elf
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.ino.elf ${PATTERN}.ino.bin
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.ino.elf ${PATTERN}.ino.hex
- ${GCC_PREFIX}-objdump -D ${PATTERN}.ino.elf > ${PATTERN}.ino.dump
+ ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.elf
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.elf ${PATTERN}.bin
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.elf ${PATTERN}.hex
+ ${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
rm *.o *.a
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
diff --git a/verilog/dv/arduino_string/arduino_string_tb.v b/verilog/dv/arduino_string/arduino_string_tb.v
index 1bd4b91..f57b93f 100644
--- a/verilog/dv/arduino_string/arduino_string_tb.v
+++ b/verilog/dv/arduino_string/arduino_string_tb.v
@@ -68,9 +68,12 @@
`timescale 1 ns / 1 ns
`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
+`include "is62wvs1288.v"
`include "uart_agent.v"
-module arduino_string_tb;
+`define TB_HEX "arduino_string.hex"
+`define TB_TOP arduino_string_tb
+module `TB_TOP;
reg clock;
reg wb_rst_i;
reg power1, power2;
@@ -144,11 +147,11 @@
`ifdef WFDUMP
initial begin
$dumpfile("simx.vcd");
- $dumpvars(3, arduino_string_tb);
- $dumpvars(0, arduino_string_tb.u_top.u_riscv_top.i_core_top_0);
- $dumpvars(0, arduino_string_tb.u_top.u_riscv_top.u_connect);
- $dumpvars(0, arduino_string_tb.u_top.u_riscv_top.u_intf);
- $dumpvars(0, arduino_string_tb.u_top.u_uart_i2c_usb_spi.u_uart0_core);
+ $dumpvars(3, `TB_TOP);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top.i_core_top_0);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_connect);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_intf);
+ $dumpvars(0, `TB_TOP.u_top.u_uart_i2c_usb_spi.u_uart0_core);
end
`endif
@@ -321,6 +324,9 @@
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
+
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
initial begin
@@ -333,26 +339,26 @@
// user core using the gpio pads
// ----------------------------------------------------
- wire flash_clk = io_out[24];
- wire flash_csb = io_out[25];
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
// Creating Pad Delay
- wire #1 io_oeb_29 = io_oeb[29];
- wire #1 io_oeb_30 = io_oeb[30];
- wire #1 io_oeb_31 = io_oeb[31];
- wire #1 io_oeb_32 = io_oeb[32];
- tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
- tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
- tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
- tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
- assign io_in[29] = flash_io0;
- assign io_in[30] = flash_io1;
- assign io_in[31] = flash_io2;
- assign io_in[32] = flash_io3;
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
// Quard flash
- s25fl256s #(.mem_file_name("arduino_string.ino.hex"),
- .otp_file_name("none"),
+ s25fl256s #(.mem_file_name(`TB_HEX),
+ .otp_file_name("none"),
.TimingModel("S25FL512SAGMFI010_F_30pF"))
u_spi_flash_256mb (
// Data Inputs/Outputs
@@ -367,14 +373,27 @@
);
+ wire spiram_csb = io_out[31];
+
+ is62wvs1288 #(.mem_file_name("none"))
+ u_sram (
+ // Data Inputs/Outputs
+ .io0 (flash_io0),
+ .io1 (flash_io1),
+ // Controls
+ .clk (flash_clk),
+ .csb (spiram_csb),
+ .io2 (flash_io2),
+ .io3 (flash_io3)
+ );
//---------------------------
// UART Agent integration
// --------------------------
wire uart_txd,uart_rxd;
-assign uart_txd = io_out[2];
-assign io_in[1] = uart_rxd ;
+assign uart_txd = io_out[7];
+assign io_in[6] = uart_rxd ;
uart_agent tb_uart(
.mclk (clock ),
diff --git a/verilog/dv/arduino_switchCase2/Makefile b/verilog/dv/arduino_switchCase2/Makefile
index 2533931..6470aef 100644
--- a/verilog/dv/arduino_switchCase2/Makefile
+++ b/verilog/dv/arduino_switchCase2/Makefile
@@ -97,10 +97,10 @@
${GCC_PREFIX}-ar rcs core.a wiring_digital.c.o
${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
- ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.ino.elf
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.ino.elf ${PATTERN}.ino.bin
- ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.ino.elf ${PATTERN}.ino.hex
- ${GCC_PREFIX}-objdump -D ${PATTERN}.ino.elf > ${PATTERN}.ino.dump
+ ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.elf
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.elf ${PATTERN}.bin
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.elf ${PATTERN}.hex
+ ${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
rm *.o *.a
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
diff --git a/verilog/dv/arduino_switchCase2/arduino_switchCase2_tb.v b/verilog/dv/arduino_switchCase2/arduino_switchCase2_tb.v
index c3e9ffb..8a3a7d8 100644
--- a/verilog/dv/arduino_switchCase2/arduino_switchCase2_tb.v
+++ b/verilog/dv/arduino_switchCase2/arduino_switchCase2_tb.v
@@ -70,7 +70,9 @@
`include "uart_agent.v"
`include "is62wvs1288.v"
-module arduino_switchCase2_tb;
+`define TB_HEX "arduino_switchCase2.hex"
+`define TB_TOP arduino_switchCase2_tb
+module `TB_TOP;
reg clock;
reg wb_rst_i;
reg power1, power2;
@@ -167,11 +169,11 @@
`ifdef WFDUMP
initial begin
$dumpfile("simx.vcd");
- $dumpvars(3, arduino_switchCase2_tb);
- $dumpvars(0, arduino_switchCase2_tb.u_top.u_riscv_top.i_core_top_0);
- $dumpvars(0, arduino_switchCase2_tb.u_top.u_riscv_top.u_connect);
- $dumpvars(0, arduino_switchCase2_tb.u_top.u_riscv_top.u_intf);
- $dumpvars(0, arduino_switchCase2_tb.u_top.u_uart_i2c_usb_spi.u_uart0_core);
+ $dumpvars(3, `TB_TOP);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top.i_core_top_0);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_connect);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top.u_intf);
+ $dumpvars(0, `TB_TOP.u_top.u_uart_i2c_usb_spi.u_uart0_core);
end
`endif
@@ -207,24 +209,24 @@
/************* Port-D Mapping **********************************
* Arduino-No
- * Pin-2 0 PD0/RXD[0] digital_io[1]
- * Pin-3 1 PD1/TXD[0] digital_io[2]
- * Pin-4 2 PD2/RXD[1]/INT0 digital_io[3]
- * Pin-5 3 PD3/INT1/OC2B(PWM0) digital_io[4]
- * Pin-6 4 PD4/TXD[1] digital_io[5]
- * Pin-11 5 PD5/SS[3]/OC0B(PWM1)/T1 digital_io[8]
- * Pin-12 6 PD6/SS[2]/OC0A(PWM2)/AIN0 digital_io[9]/analog_io[2]
- * Pin-13 7 PD7/A1N1 digital_io[10]/analog_io[3]
+ * Pin-2 0 PD0/RXD[0] digital_io[6]
+ * Pin-3 1 PD1/TXD[0] digital_io[7]
+ * Pin-4 2 PD2/RXD[1]/INT0 digital_io[8]
+ * Pin-5 3 PD3/INT1/OC2B(PWM0) digital_io[9]
+ * Pin-6 4 PD4/TXD[1] digital_io[10]
+ * Pin-11 5 PD5/SS[3]/OC0B(PWM1)/T1 digital_io[13]
+ * Pin-12 6 PD6/SS[2]/OC0A(PWM2)/AIN0 digital_io[14]/analog_io[2]
+ * Pin-13 7 PD7/A1N1 digital_io[15]/analog_io[3]
* ********************************************************/
- wire [7:0] port_d_in = { io_out[10],
- io_out[9],
- io_out[8],
- io_out[5],
- io_out[4],
- io_out[3],
- io_out[2],
- io_out[1]
+ wire [7:0] port_d_in = { io_out[15],
+ io_out[14],
+ io_out[13],
+ io_out[10],
+ io_out[9],
+ io_out[8],
+ io_out[7],
+ io_out[6]
};
initial begin
uart_data_bit = 2'b11;
@@ -377,6 +379,9 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
+assign io_in[16] = 1'b0 ; // SPIS SCK
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
@@ -390,25 +395,25 @@
// user core using the gpio pads
// ----------------------------------------------------
- wire flash_clk = io_out[24];
- wire flash_csb = io_out[25];
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
// Creating Pad Delay
- wire #1 io_oeb_29 = io_oeb[29];
- wire #1 io_oeb_30 = io_oeb[30];
- wire #1 io_oeb_31 = io_oeb[31];
- wire #1 io_oeb_32 = io_oeb[32];
- tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
- tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
- tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
- tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
- assign io_in[29] = flash_io0;
- assign io_in[30] = flash_io1;
- assign io_in[31] = flash_io2;
- assign io_in[32] = flash_io3;
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
// Quard flash
- s25fl256s #(.mem_file_name("arduino_switchCase2.ino.hex"),
+ s25fl256s #(.mem_file_name(`TB_HEX),
.otp_file_name("none"),
.TimingModel("S25FL512SAGMFI010_F_30pF"))
u_spi_flash_256mb (
@@ -424,8 +429,7 @@
);
-
- wire spiram_csb = io_out[27];
+ wire spiram_csb = io_out[31];
is62wvs1288 #(.mem_file_name("none"))
u_sram (
@@ -443,8 +447,8 @@
// --------------------------
wire uart_txd,uart_rxd;
-assign uart_txd = io_out[2];
-assign io_in[1] = uart_rxd ;
+assign uart_txd = io_out[7];
+assign io_in[6] = uart_rxd ;
uart_agent tb_uart(
.mclk (clock ),
diff --git a/verilog/dv/arduino_timer_intr/Makefile b/verilog/dv/arduino_timer_intr/Makefile
new file mode 100644
index 0000000..4a23ffa
--- /dev/null
+++ b/verilog/dv/arduino_timer_intr/Makefile
@@ -0,0 +1,144 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+
+# ---- Include Partitioned Makefiles ----
+
+CONFIG = caravel_user_project
+
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+
+DESIGNS?=../../..
+TOOLS?=/opt/riscv32i/
+
+export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
+export RISCDUINO_BOARD ?= $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
+## YIFIVE FIRMWARE
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+GCC_PREFIX?=riscv32-unknown-elf
+
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+DUMP?=OFF
+RISC_CORE?=0
+
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
+.SUFFIXES:
+
+PATTERN = arduino_timer_intr
+
+all: ${PATTERN:=.vcd}
+
+
+vvp: ${PATTERN:=.vvp}
+
+%.vvp: %_tb.v
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${PATTERN}.ino.cpp -o ${PATTERN}.ino.cpp.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/Print.cpp -o Print.cpp.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WMath.cpp -o WMath.cpp.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WString.cpp -o WString.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WInterrupts.c -o WInterrupts.c.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/fe300prci/fe300prci_driver.c -o fe300prci_driver.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/abi.cpp -o abi.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/plic/plic_driver.c -o plic_driver.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/UARTClass.cpp -o UARTClass.cpp.o
+
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/TIMERClass.cpp -o TIMERClass.cpp.o
+
+ ${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/entry.S -o entry.S.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/hooks.c -o hooks.c.o
+ ${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/init.S -o init.S.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/itoa.c -o itoa.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/main.cpp -o main.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/malloc.c -o malloc.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/new.cpp -o new.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/sbrk.c -o sbrk.c.o
+ ${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/start.S -o start.S.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring.c -o wiring.c.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_analog.c -o wiring_analog.c.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_digital.c -o wiring_digital.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_pulse.cpp -o wiring_pulse.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_shift.c -o wiring_shift.c.o
+ ${GCC_PREFIX}-ar rcs core.a Print.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a UARTClass.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a TIMERClass.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a WInterrupts.c.o
+ ${GCC_PREFIX}-ar rcs core.a WMath.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a WString.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a abi.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a fe300prci_driver.c.o
+ ${GCC_PREFIX}-ar rcs core.a plic_driver.c.o
+ ${GCC_PREFIX}-ar rcs core.a entry.S.o
+ ${GCC_PREFIX}-ar rcs core.a hooks.c.o
+ ${GCC_PREFIX}-ar rcs core.a init.S.o
+ ${GCC_PREFIX}-ar rcs core.a itoa.c.o
+ ${GCC_PREFIX}-ar rcs core.a main.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a malloc.c.o
+ ${GCC_PREFIX}-ar rcs core.a new.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a sbrk.c.o
+ ${GCC_PREFIX}-ar rcs core.a start.S.o
+ ${GCC_PREFIX}-ar rcs core.a wiring.c.o
+ ${GCC_PREFIX}-ar rcs core.a wiring_analog.c.o
+ ${GCC_PREFIX}-ar rcs core.a wiring_digital.c.o
+ ${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
+ ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.elf
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.elf ${PATTERN}.bin
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.elf ${PATTERN}.hex
+ ${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
+ rm *.o *.a
+ifeq ($(SIM),RTL)
+ ifeq ($(DUMP),OFF)
+ iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
+ $< -o $@
+ else
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
+ $< -o $@
+ endif
+else
+ ifeq ($(DUMP),OFF)
+ iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+ $< -o $@
+ else
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+ $< -o $@
+ endif
+endif
+
+%.vcd: %.vvp
+ vvp $< +risc_core_id=$(RISC_CORE)
+
+
+# ---- Clean ----
+
+clean:
+ rm -f *.elf *.hex *.bin *.vvp *.vcd *.log *.dump *.a *.o
+
+.PHONY: clean hex all
diff --git a/verilog/dv/arduino_timer_intr/arduino_timer_intr.ino b/verilog/dv/arduino_timer_intr/arduino_timer_intr.ino
new file mode 100644
index 0000000..f38f333
--- /dev/null
+++ b/verilog/dv/arduino_timer_intr/arduino_timer_intr.ino
@@ -0,0 +1,81 @@
+
+/*
+
+ Analog input, analog output, serial output
+
+ Reads an analog input pin, maps the result to a range from 0 to 255 and uses
+
+ the result to set the pulse width modulation (PWM) of an output pin.
+
+ Also prints the results to the Serial Monitor.
+
+ The circuit:
+
+ - potentiometer connected to analog pin 0.
+
+ Center pin of the potentiometer goes to the analog pin.
+
+ side pins of the potentiometer go to +5V and ground
+
+ - LED connected from digital pin 9 to ground
+
+ created 29 Dec. 2008
+
+ modified 9 Apr 2012
+
+ by Tom Igoe
+
+ This example code is in the public domain.
+
+ http://www.arduino.cc/en/Tutorial/AnalogInOutSerial
+
+*/
+
+#include"Arduino.h"
+// These constants won't change. They're used to give names to the pins used:
+
+
+int but1=2;
+int but2=3;
+
+
+int Timer_us =0;
+int Timer_ms =0;
+void setup() {
+
+ Timer.begin();
+ Timer.enable(0, TIMER_MICRO_STEP, 10); // 10 Micro Second
+ Timer.enable(1, TIMER_MILLI_STEP, 1); // 1 Milli Second
+ // initialize serial communications at 9600 bps:
+ Serial.begin(9600);
+ attachInterrupt(timerToInterrupt(0),timer_us_intr,RISING);
+ attachInterrupt(timerToInterrupt(1),timer_ms_intr,RISING);
+
+}
+
+void loop() {
+
+ delay(1);
+}
+
+
+void timer_us_intr()
+ {
+ Timer_us = Timer_us + 1;
+ if(Timer_us > 255) Timer_us = 0;;
+
+ Serial.print("Micro Second: ");
+ Serial.println(Timer_us);
+
+
+ }
+void timer_ms_intr()
+ {
+ Timer_ms = Timer_ms + 1;
+ if(Timer_ms > 255) Timer_ms = 0;;
+
+ Serial.print("Milli Second: ");
+ Serial.println(Timer_ms);
+
+
+ }
diff --git a/verilog/dv/arduino_timer_intr/arduino_timer_intr.ino.cpp b/verilog/dv/arduino_timer_intr/arduino_timer_intr.ino.cpp
new file mode 100644
index 0000000..5c6104b
--- /dev/null
+++ b/verilog/dv/arduino_timer_intr/arduino_timer_intr.ino.cpp
@@ -0,0 +1,64 @@
+
+/*
+Testing the Timer Interrupt
+
+*/
+
+#include"Arduino.h"
+// These constants won't change. They're used to give names to the pins used:
+
+
+
+
+uint8_t Timer_us =0;
+uint8_t Timer_ms =0;
+void setup();
+void loop();
+void timer_us_intr();
+void timer_ms_intr();
+void setup() {
+
+ Timer.begin();
+ Timer.enable(0, TIMER_MICRO_STEP, 400); // 1000 Micro Second
+ Timer.enable(1, TIMER_MILLI_STEP, 2); // 2 Milli Second
+ // initialize serial communications at 9600 bps:
+ Serial.begin(1152000);
+ attachInterrupt(timerToInterrupt(0),timer_us_intr,RISING);
+ attachInterrupt(timerToInterrupt(1),timer_ms_intr,RISING);
+
+}
+
+void loop() {
+
+ delay(1);
+
+}
+
+
+void timer_us_intr()
+ {
+ Timer_us = Timer_us + 1;
+ if(Timer_us > 255) Timer_us = 0;;
+
+ Serial.print("Timer-0 Step: ");
+ Serial.println(Timer_us);
+ if(Timer_us > 19) {
+ Timer.disable(0);
+ }
+
+
+
+ }
+void timer_ms_intr()
+ {
+ Timer_ms = Timer_ms + 1;
+ if(Timer_ms > 255) Timer_ms = 0;;
+
+ Serial.print("Timer-1 Step: ");
+ Serial.println(Timer_ms);
+
+ if(Timer_ms > 4) {
+ Timer.disable(1);
+ }
+
+ }
diff --git a/verilog/dv/arduino_timer_intr/arduino_timer_intr_tb.v b/verilog/dv/arduino_timer_intr/arduino_timer_intr_tb.v
new file mode 100644
index 0000000..4107a97
--- /dev/null
+++ b/verilog/dv/arduino_timer_intr/arduino_timer_intr_tb.v
@@ -0,0 +1,549 @@
+////////////////////////////////////////////////////////////////////////////
+// SPDX-FileCopyrightText: 2021 , Dinesh Annayya
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+// SPDX-FileContributor: Modified by Dinesh Annayya <dinesha@opencores.org>
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Standalone User validation Test bench ////
+//// ////
+//// This file is part of the riscdunio cores project ////
+//// https://github.com/dineshannayya/riscdunio.git ////
+//// ////
+//// Description ////
+//// This is a standalone test bench to validate the ////
+//// Digital core. ////
+//// This test bench to validate Arduino Interrupt ////
+//// ////
+//// To Do: ////
+//// nothing ////
+//// ////
+//// Author(s): ////
+//// - Dinesh Annayya, dinesh.annayya@gmail.com ////
+//// ////
+//// Revision : ////
+//// 0.1 - 29th July 2022, Dinesh A ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2000 Authors and OPENCORES.ORG ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+
+`default_nettype wire
+
+`timescale 1 ns / 1 ns
+
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
+`include "is62wvs1288.v"
+`include "uart_agent.v"
+
+`define TB_HEX "arduino_timer_intr.hex"
+`define TB_TOP arduino_timer_intr_tb
+
+module `TB_TOP;
+ reg clock;
+ reg wb_rst_i;
+ reg power1, power2;
+ reg power3, power4;
+
+ reg wbd_ext_cyc_i; // strobe/request
+ reg wbd_ext_stb_i; // strobe/request
+ reg [31:0] wbd_ext_adr_i; // address
+ reg wbd_ext_we_i; // write
+ reg [31:0] wbd_ext_dat_i; // data output
+ reg [3:0] wbd_ext_sel_i; // byte enable
+
+ wire [31:0] wbd_ext_dat_o; // data input
+ wire wbd_ext_ack_o; // acknowlegement
+ wire wbd_ext_err_o; // error
+
+ // User I/O
+ wire [37:0] io_oeb;
+ wire [37:0] io_out;
+ wire [37:0] io_in;
+
+ wire gpio;
+ wire [37:0] mprj_io;
+ wire [7:0] mprj_io_0;
+ reg test_fail;
+ reg [31:0] read_data;
+ //----------------------------------
+ // Uart Configuration
+ // ---------------------------------
+ reg [1:0] uart_data_bit ;
+ reg uart_stop_bits ; // 0: 1 stop bit; 1: 2 stop bit;
+ reg uart_stick_parity ; // 1: force even parity
+ reg uart_parity_en ; // parity enable
+ reg uart_even_odd_parity ; // 0: odd parity; 1: even parity
+
+ reg [7:0] uart_data ;
+ reg [15:0] uart_divisor ; // divided by n * 16
+ reg [15:0] uart_timeout ;// wait time limit
+
+ reg [15:0] uart_rx_nu ;
+ reg [15:0] uart_tx_nu ;
+ reg [7:0] uart_write_data [0:39];
+ reg uart_fifo_enable ; // fifo mode disable
+ reg flag ;
+ reg compare_start ; // User Need to make sure that compare start match with RiscV core completing initial booting
+
+ reg [31:0] check_sum ;
+
+ integer d_risc_id;
+
+ integer i,j;
+
+
+
+
+ // 50Mhz CLock
+ always #10 clock <= (clock === 1'b0);
+
+ initial begin
+ clock = 0;
+ flag = 0;
+ compare_start = 0;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ end
+
+ `ifdef WFDUMP
+ initial begin
+ $dumpfile("simx.vcd");
+ $dumpvars(3, `TB_TOP);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top);
+ $dumpvars(0, `TB_TOP.u_top.u_pinmux);
+ $dumpvars(0, `TB_TOP.u_top.u_uart_i2c_usb_spi);
+ end
+ `endif
+
+
+ wire [15:0] irq_lines = u_top.u_pinmux.u_glbl_reg.irq_lines;
+
+
+
+ /*************************************************************************
+ * This is Baud Rate to clock divider conversion for Test Bench
+ * Note: DUT uses 16x baud clock, where are test bench uses directly
+ * baud clock, Due to 16x Baud clock requirement at RTL, there will be
+ * some resolution loss, we expect at lower baud rate this resolution
+ * loss will be less. For Quick simulation perpose higher baud rate used
+ * *************************************************************************/
+ task tb_set_uart_baud;
+ input [31:0] ref_clk;
+ input [31:0] baud_rate;
+ output [31:0] baud_div;
+ reg [31:0] baud_div;
+ begin
+ // for 230400 Baud = (50Mhz/230400) = 216.7
+ baud_div = ref_clk/baud_rate; // Get the Bit Baud rate
+ // Baud 16x = 216/16 = 13
+ baud_div = baud_div/16; // To find the RTL baud 16x div value to find similar resolution loss in test bench
+ // Test bench baud clock , 16x of above value
+ // 13 * 16 = 208,
+ // (Note if you see original value was 216, now it's 208 )
+ baud_div = baud_div * 16;
+ // Test bench half cycle counter to toggle it
+ // 208/2 = 104
+ baud_div = baud_div/2;
+ //As counter run's from 0 , substract from 1
+ baud_div = baud_div-1;
+ end
+ endtask
+
+
+
+ initial begin
+
+
+ uart_data_bit = 2'b11;
+ uart_stop_bits = 0; // 0: 1 stop bit; 1: 2 stop bit;
+ uart_stick_parity = 0; // 1: force even parity
+ uart_parity_en = 0; // parity enable
+ uart_even_odd_parity = 1; // 0: odd parity; 1: even parity
+ tb_set_uart_baud(50000000,1152000,uart_divisor);// 50Mhz Ref clock, Baud Rate: 230400
+ uart_timeout = 2000;// wait time limit
+ uart_fifo_enable = 0; // fifo mode disable
+
+ $value$plusargs("risc_core_id=%d", d_risc_id);
+
+ #200; // Wait for reset removal
+ repeat (10) @(posedge clock);
+ $display("Monitor: Standalone User Risc Boot Test Started");
+
+ // Remove Wb Reset
+ wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+
+ repeat (2) @(posedge clock);
+ #1;
+ // Remove all the reset
+ if(d_risc_id == 0) begin
+ $display("STATUS: Working with Risc core 0");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+ end else if(d_risc_id == 1) begin
+ $display("STATUS: Working with Risc core 1");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
+ end else if(d_risc_id == 2) begin
+ $display("STATUS: Working with Risc core 2");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h41F);
+ end else if(d_risc_id == 3) begin
+ $display("STATUS: Working with Risc core 3");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h81F);
+ end
+
+ repeat (100) @(posedge clock); // wait for Processor Get Ready
+
+ tb_uart.debug_mode = 0; // disable debug display
+ tb_uart.uart_init;
+ tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity,
+ uart_stick_parity, uart_timeout, uart_divisor);
+
+ repeat (55000) @(posedge clock); // wait for Processor Get Ready
+ flag = 0;
+ check_sum = 0;
+ compare_start = 1;
+
+ fork
+
+ begin
+ while(flag == 0)
+ begin
+ tb_uart.read_char(read_data,flag);
+ if(flag == 0) begin
+ $write ("%c",read_data);
+ check_sum = check_sum+read_data;
+ end
+ end
+ end
+ begin
+ repeat (510000) @(posedge clock); // wait for Processor Get Ready
+ end
+ join_any
+
+ #1000
+ tb_uart.report_status(uart_rx_nu, uart_tx_nu);
+
+ test_fail = 0;
+
+ $display("Total Rx Char: %d Check Sum : %x ",uart_rx_nu, check_sum);
+ // Check
+ // if all the 102 byte received
+ // if no error
+ if(uart_rx_nu != 436) test_fail = 1;
+ if(check_sum != 32'h78cd) test_fail = 1;
+ if(tb_uart.err_cnt != 0) test_fail = 1;
+
+
+ $display("###################################################");
+ if(test_fail == 0) begin
+ `ifdef GL
+ $display("Monitor: Standalone String (GL) Passed");
+ `else
+ $display("Monitor: Standalone String (RTL) Passed");
+ `endif
+ end else begin
+ `ifdef GL
+ $display("Monitor: Standalone String (GL) Failed");
+ `else
+ $display("Monitor: Standalone String (RTL) Failed");
+ `endif
+ end
+ $display("###################################################");
+ $finish;
+ end
+
+ initial begin
+ wb_rst_i <= 1'b1;
+ #100;
+ wb_rst_i <= 1'b0; // Release reset
+ end
+wire USER_VDD1V8 = 1'b1;
+wire VSS = 1'b0;
+
+user_project_wrapper u_top(
+`ifdef USE_POWER_PINS
+ .vccd1(USER_VDD1V8), // User area 1 1.8V supply
+ .vssd1(VSS), // User area 1 digital ground
+`endif
+ .wb_clk_i (clock), // System clock
+ .user_clock2 (1'b1), // Real-time clock
+ .wb_rst_i (wb_rst_i), // Regular Reset signal
+
+ .wbs_cyc_i (wbd_ext_cyc_i), // strobe/request
+ .wbs_stb_i (wbd_ext_stb_i), // strobe/request
+ .wbs_adr_i (wbd_ext_adr_i), // address
+ .wbs_we_i (wbd_ext_we_i), // write
+ .wbs_dat_i (wbd_ext_dat_i), // data output
+ .wbs_sel_i (wbd_ext_sel_i), // byte enable
+
+ .wbs_dat_o (wbd_ext_dat_o), // data input
+ .wbs_ack_o (wbd_ext_ack_o), // acknowlegement
+
+
+ // Logic Analyzer Signals
+ .la_data_in ('1) ,
+ .la_data_out (),
+ .la_oenb ('0),
+
+
+ // IOs
+ .io_in (io_in) ,
+ .io_out (io_out) ,
+ .io_oeb (io_oeb) ,
+
+ .user_irq ()
+
+);
+// SSPI Slave I/F
+assign io_in[5] = 1'b1; // RESET
+//assign io_in[16] = 1'b0 ; // SPIS SCK
+
+`ifndef GL // Drive Power for Hold Fix Buf
+ // All standard cell need power hook-up for functionality work
+ initial begin
+
+ end
+`endif
+
+//------------------------------------------------------
+// Integrate the Serial flash with qurd support to
+// user core using the gpio pads
+// ----------------------------------------------------
+
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
+ // Creating Pad Delay
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
+
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
+
+ // Quard flash
+ s25fl256s #(.mem_file_name(`TB_HEX),
+ .otp_file_name("none"),
+ .TimingModel("S25FL512SAGMFI010_F_30pF"))
+ u_spi_flash_256mb (
+ // Data Inputs/Outputs
+ .SI (flash_io0),
+ .SO (flash_io1),
+ // Controls
+ .SCK (flash_clk),
+ .CSNeg (flash_csb),
+ .WPNeg (flash_io2),
+ .HOLDNeg (flash_io3),
+ .RSTNeg (!wb_rst_i)
+
+ );
+
+ wire spiram_csb = io_out[31];
+
+ is62wvs1288 #(.mem_file_name("none"))
+ u_sram (
+ // Data Inputs/Outputs
+ .io0 (flash_io0),
+ .io1 (flash_io1),
+ // Controls
+ .clk (flash_clk),
+ .csb (spiram_csb),
+ .io2 (flash_io2),
+ .io3 (flash_io3)
+ );
+//---------------------------
+// UART Agent integration
+// --------------------------
+wire uart_txd,uart_rxd;
+
+assign uart_txd = io_out[7];
+assign io_in[6] = uart_rxd ;
+
+uart_agent tb_uart(
+ .mclk (clock ),
+ .txd (uart_rxd ),
+ .rxd (uart_txd )
+ );
+
+
+//----------------------------
+// All the task are defined here
+//----------------------------
+
+
+
+task wb_user_core_write;
+input [31:0] address;
+input [31:0] data;
+begin
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_adr_i =address; // address
+ wbd_ext_we_i ='h1; // write
+ wbd_ext_dat_i =data; // data output
+ wbd_ext_sel_i ='hF; // byte enable
+ wbd_ext_cyc_i ='h1; // strobe/request
+ wbd_ext_stb_i ='h1; // strobe/request
+ wait(wbd_ext_ack_o == 1);
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
+ repeat (2) @(posedge clock);
+end
+endtask
+
+task wb_user_core_read;
+input [31:0] address;
+output [31:0] data;
+reg [31:0] data;
+begin
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_adr_i =address; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='0; // data output
+ wbd_ext_sel_i ='hF; // byte enable
+ wbd_ext_cyc_i ='h1; // strobe/request
+ wbd_ext_stb_i ='h1; // strobe/request
+ wait(wbd_ext_ack_o == 1);
+ repeat (1) @(negedge clock);
+ data = wbd_ext_dat_o;
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
+ repeat (2) @(posedge clock);
+end
+endtask
+
+task wb_user_core_read_check;
+input [31:0] address;
+output [31:0] data;
+input [31:0] cmp_data;
+reg [31:0] data;
+begin
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_adr_i =address; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='0; // data output
+ wbd_ext_sel_i ='hF; // byte enable
+ wbd_ext_cyc_i ='h1; // strobe/request
+ wbd_ext_stb_i ='h1; // strobe/request
+ wait(wbd_ext_ack_o == 1);
+ repeat (1) @(negedge clock);
+ data = wbd_ext_dat_o;
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ if(data !== cmp_data) begin
+ $display("ERROR : WB USER ACCESS READ Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
+ test_fail = 1;
+ end else begin
+ $display("STATUS: WB USER ACCESS READ Address : 0x%x, Data : 0x%x",address,data);
+ end
+ repeat (2) @(posedge clock);
+end
+endtask
+
+`ifdef GL
+
+wire wbd_spi_stb_i = u_top.u_qspi_master.wbd_stb_i;
+wire wbd_spi_ack_o = u_top.u_qspi_master.wbd_ack_o;
+wire wbd_spi_we_i = u_top.u_qspi_master.wbd_we_i;
+wire [31:0] wbd_spi_adr_i = u_top.u_qspi_master.wbd_adr_i;
+wire [31:0] wbd_spi_dat_i = u_top.u_qspi_master.wbd_dat_i;
+wire [31:0] wbd_spi_dat_o = u_top.u_qspi_master.wbd_dat_o;
+wire [3:0] wbd_spi_sel_i = u_top.u_qspi_master.wbd_sel_i;
+
+wire wbd_uart_stb_i = u_top.u_uart_i2c_usb_spi.reg_cs;
+wire wbd_uart_ack_o = u_top.u_uart_i2c_usb_spi.reg_ack;
+wire wbd_uart_we_i = u_top.u_uart_i2c_usb_spi.reg_wr;
+wire [8:0] wbd_uart_adr_i = u_top.u_uart_i2c_usb_spi.reg_addr;
+wire [7:0] wbd_uart_dat_i = u_top.u_uart_i2c_usb_spi.reg_wdata;
+wire [7:0] wbd_uart_dat_o = u_top.u_uart_i2c_usb_spi.reg_rdata;
+wire wbd_uart_sel_i = u_top.u_uart_i2c_usb_spi.reg_be;
+
+`endif
+
+/**
+`ifdef GL
+//-----------------------------------------------------------------------------
+// RISC IMEM amd DMEM Monitoring TASK
+//-----------------------------------------------------------------------------
+
+`define RISC_CORE user_uart_tb.u_top.u_core.u_riscv_top
+
+always@(posedge `RISC_CORE.wb_clk) begin
+ if(`RISC_CORE.wbd_imem_ack_i)
+ $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
+ if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
+ $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
+ if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
+ $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
+end
+
+`endif
+**/
+endmodule
+`include "s25fl256s.sv"
+`default_nettype wire
diff --git a/verilog/dv/arduino_ws281x/Makefile b/verilog/dv/arduino_ws281x/Makefile
new file mode 100644
index 0000000..0a22bf8
--- /dev/null
+++ b/verilog/dv/arduino_ws281x/Makefile
@@ -0,0 +1,144 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+
+
+# ---- Include Partitioned Makefiles ----
+
+CONFIG = caravel_user_project
+
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+
+DESIGNS?=../../..
+TOOLS?=/opt/riscv32i/
+
+export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
+export RISCDUINO_BOARD ?= $(USER_PROJECT_VERILOG)/dv/common/riscduino_board/custom_board/riscduino
+## YIFIVE FIRMWARE
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+GCC_PREFIX?=riscv32-unknown-elf
+
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+DUMP?=OFF
+RISC_CORE?=0
+
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
+.SUFFIXES:
+
+PATTERN = arduino_ws281x
+
+all: ${PATTERN:=.vcd}
+
+
+vvp: ${PATTERN:=.vvp}
+
+%.vvp: %_tb.v
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${PATTERN}.ino.cpp -I${RISCDUINO_BOARD}/libraries/WS281X/src -o ${PATTERN}.ino.cpp.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/Print.cpp -o Print.cpp.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WMath.cpp -o WMath.cpp.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WString.cpp -o WString.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/WInterrupts.c -o WInterrupts.c.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/fe300prci/fe300prci_driver.c -o fe300prci_driver.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/abi.cpp -o abi.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/drivers/plic/plic_driver.c -o plic_driver.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/UARTClass.cpp -o UARTClass.cpp.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/TIMERClass.cpp -o TIMERClass.cpp.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard -I${RISCDUINO_BOARD}/libraries/WS281X/src ${RISCDUINO_BOARD}/libraries/WS281X/src/WS281X.cpp -o WS281X.cpp.o
+ ${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/entry.S -o entry.S.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/hooks.c -o hooks.c.o
+ ${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/init.S -o init.S.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/itoa.c -o itoa.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/main.cpp -o main.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/malloc.c -o malloc.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/new.cpp -o new.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/sbrk.c -o sbrk.c.o
+ ${GCC_PREFIX}-gcc -c -march=rv32imac -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/start.S -o start.S.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring.c -o wiring.c.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_analog.c -o wiring_analog.c.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_digital.c -o wiring_digital.c.o
+ ${GCC_PREFIX}-g++ -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -fpermissive -Wall -fno-rtti -fno-exceptions -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_pulse.cpp -o wiring_pulse.cpp.o
+ ${GCC_PREFIX}-gcc -c -O2 -march=rv32imac -fpeel-loops -ffreestanding -ffunction-sections -fdata-sections -Wall -I${RISCDUINO_BOARD}/system/include -I${RISCDUINO_BOARD}/sdk/bsp/include -I${RISCDUINO_BOARD}/sdk/bsp/env -I${RISCDUINO_BOARD}/sdk/bsp/drivers -I${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score -include sys/cdefs.h -g -DARDUINO=10607 -DF_CPU=50000000LL -DRISCDUINO_SCORE_DEVKIT -I${RISCDUINO_BOARD}/cores/arduino -I${RISCDUINO_BOARD}/variants/standard ${RISCDUINO_BOARD}/cores/arduino/wiring_shift.c -o wiring_shift.c.o
+ ${GCC_PREFIX}-ar rcs core.a Print.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a UARTClass.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a TIMERClass.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a WS281X.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a WInterrupts.c.o
+ ${GCC_PREFIX}-ar rcs core.a WMath.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a WString.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a abi.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a fe300prci_driver.c.o
+ ${GCC_PREFIX}-ar rcs core.a plic_driver.c.o
+ ${GCC_PREFIX}-ar rcs core.a entry.S.o
+ ${GCC_PREFIX}-ar rcs core.a hooks.c.o
+ ${GCC_PREFIX}-ar rcs core.a init.S.o
+ ${GCC_PREFIX}-ar rcs core.a itoa.c.o
+ ${GCC_PREFIX}-ar rcs core.a main.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a malloc.c.o
+ ${GCC_PREFIX}-ar rcs core.a new.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a sbrk.c.o
+ ${GCC_PREFIX}-ar rcs core.a start.S.o
+ ${GCC_PREFIX}-ar rcs core.a wiring.c.o
+ ${GCC_PREFIX}-ar rcs core.a wiring_analog.c.o
+ ${GCC_PREFIX}-ar rcs core.a wiring_digital.c.o
+ ${GCC_PREFIX}-ar rcs core.a wiring_pulse.cpp.o
+ ${GCC_PREFIX}-ar rcs core.a wiring_shift.c.o
+ ${GCC_PREFIX}-g++ -T ${RISCDUINO_BOARD}/sdk/bsp/env/riscduino_score/link.lds -nostartfiles -Wl,-N -Wl,--gc-sections -Wl,--wrap=malloc -Wl,--wrap=free -Wl,--wrap=sbrk ${PATTERN}.ino.cpp.o -nostdlib -Wl,--start-group core.a -lm -lstdc++ -lc -lgloss -Wl,--end-group -lgcc -o ${PATTERN}.elf
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O binary ${PATTERN}.elf ${PATTERN}.bin
+ ${GCC_PREFIX}-objcopy -R .rel.dyn -O verilog ${PATTERN}.elf ${PATTERN}.hex
+ ${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
+ rm *.o *.a
+ifeq ($(SIM),RTL)
+ ifeq ($(DUMP),OFF)
+ iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
+ $< -o $@
+ else
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
+ $< -o $@
+ endif
+else
+ ifeq ($(DUMP),OFF)
+ iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+ $< -o $@
+ else
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+ $< -o $@
+ endif
+endif
+
+%.vcd: %.vvp
+ vvp $< +risc_core_id=$(RISC_CORE)
+
+
+# ---- Clean ----
+
+clean:
+ rm -f *.elf *.hex *.bin *.vvp *.vcd *.log *.dump *.a *.o
+
+.PHONY: clean hex all
diff --git a/verilog/dv/arduino_ws281x/arduino_ws281x.ino b/verilog/dv/arduino_ws281x/arduino_ws281x.ino
new file mode 100644
index 0000000..20517d7
--- /dev/null
+++ b/verilog/dv/arduino_ws281x/arduino_ws281x.ino
@@ -0,0 +1,60 @@
+
+/*
+
+ Analog input, analog output, serial output
+
+ Reads an analog input pin, maps the result to a range from 0 to 255 and uses
+
+ the result to set the pulse width modulation (PWM) of an output pin.
+
+ Also prints the results to the Serial Monitor.
+
+ The circuit:
+
+ - potentiometer connected to analog pin 0.
+
+ Center pin of the potentiometer goes to the analog pin.
+
+ side pins of the potentiometer go to +5V and ground
+
+ - LED connected from digital pin 9 to ground
+
+ created 29 Dec. 2008
+
+ modified 9 Apr 2012
+
+ by Tom Igoe
+
+ This example code is in the public domain.
+
+ http://www.arduino.cc/en/Tutorial/AnalogInOutSerial
+
+*/
+
+#include"Arduino.h"
+// These constants won't change. They're used to give names to the pins used:
+
+
+int but1=2;
+int but2=3;
+
+
+void setup() {
+
+ ws281x.begin(WS2811_LOW_SPEED);
+ ws281x.enable(2);
+}
+
+void loop() {
+
+ ws281x.write(2, 0x112233);
+ ws281x.write(2, 0x223344);
+ ws281x.write(2, 0x334455);
+ ws281x.write(2, 0x445566);
+ ws281x.write(2, 0x556677);
+ ws281x.write(2, 0x667788);
+ ws281x.write(2, 0x778899);
+ delay(1);
+}
+
+
diff --git a/verilog/dv/arduino_ws281x/arduino_ws281x.ino.cpp b/verilog/dv/arduino_ws281x/arduino_ws281x.ino.cpp
new file mode 100644
index 0000000..db5dc4a
--- /dev/null
+++ b/verilog/dv/arduino_ws281x/arduino_ws281x.ino.cpp
@@ -0,0 +1,135 @@
+#line 1 "/home/dinesha/Arduino/ws281x_example1/ws281x_example1.ino"
+
+/*
+
+ Analog input, analog output, serial output
+
+ Reads an analog input pin, maps the result to a range from 0 to 255 and uses
+
+ the result to set the pulse width modulation (PWM) of an output pin.
+
+ Also prints the results to the Serial Monitor.
+
+ The circuit:
+
+ - potentiometer connected to analog pin 0.
+
+ Center pin of the potentiometer goes to the analog pin.
+
+ side pins of the potentiometer go to +5V and ground
+
+ - LED connected from digital pin 9 to ground
+
+ created 29 Dec. 2008
+
+ modified 9 Apr 2012
+
+ by Tom Igoe
+
+ This example code is in the public domain.
+
+ http://www.arduino.cc/en/Tutorial/AnalogInOutSerial
+
+*/
+
+#include"Arduino.h"
+#include"WS281X.h"
+// These constants won't change. They're used to give names to the pins used:
+
+
+int port0 = 2;
+int port1 = 3;
+int port2 = 5;
+int port3 = 9;
+
+
+void setup();
+void loop();
+void setup() {
+
+ ws281x.begin(WS2811_HIGH_SPEED);
+
+ // Enable WS_281X PORT-0
+ ws281x.enable(port0);
+ ws281x.write(port0, 0x112233);
+ ws281x.write(port0, 0x223344);
+ ws281x.write(port0, 0x334455);
+ ws281x.write(port0, 0x445566);
+ ws281x.write(port0, 0x556677);
+ ws281x.write(port0, 0x667788);
+ ws281x.write(port0, 0x778899);
+ ws281x.write(port0, 0x8899AA);
+ ws281x.write(port0, 0x99AABB);
+ ws281x.write(port0, 0xAABBCC);
+ ws281x.write(port0, 0xBBCCDD);
+ ws281x.write(port0, 0xCCDDEE);
+ ws281x.write(port0, 0xDDEEFF);
+ ws281x.write(port0, 0xEEFF00);
+ ws281x.write(port0, 0xFF0011);
+ ws281x.write(port0, 0x001122);
+
+// Enable WS_281X PORT-1
+ ws281x.enable(port1);
+ ws281x.write(port1, 0x010203);
+ ws281x.write(port1, 0x020304);
+ ws281x.write(port1, 0x030405);
+ ws281x.write(port1, 0x040506);
+ ws281x.write(port1, 0x050607);
+ ws281x.write(port1, 0x060708);
+ ws281x.write(port1, 0x070809);
+ ws281x.write(port1, 0x08090A);
+ ws281x.write(port1, 0x090A0B);
+ ws281x.write(port1, 0x0A0B0C);
+ ws281x.write(port1, 0x0B0C0D);
+ ws281x.write(port1, 0x0C0D0E);
+ ws281x.write(port1, 0x0D0E0F);
+ ws281x.write(port1, 0x0E0F00);
+ ws281x.write(port1, 0x0F0001);
+ ws281x.write(port1, 0x000102);
+
+// Enable WS_281X PORT-2
+ ws281x.enable(port2);
+ ws281x.write(port2, 0x102030);
+ ws281x.write(port2, 0x203040);
+ ws281x.write(port2, 0x304050);
+ ws281x.write(port2, 0x405060);
+ ws281x.write(port2, 0x506070);
+ ws281x.write(port2, 0x607080);
+ ws281x.write(port2, 0x708090);
+ ws281x.write(port2, 0x8090A0);
+ ws281x.write(port2, 0x90A0B0);
+ ws281x.write(port2, 0xA0B0C0);
+ ws281x.write(port2, 0xB0C0D0);
+ ws281x.write(port2, 0xC0D0E0);
+ ws281x.write(port2, 0xD0E0F0);
+ ws281x.write(port2, 0xE0F000);
+ ws281x.write(port2, 0xF00010);
+ ws281x.write(port2, 0x001020);
+
+// Enable WS_281X PORT-3
+ ws281x.enable(port3);
+ ws281x.write(port3, 0x012345);
+ ws281x.write(port3, 0x123456);
+ ws281x.write(port3, 0x234567);
+ ws281x.write(port3, 0x345678);
+ ws281x.write(port3, 0x456789);
+ ws281x.write(port3, 0x56789A);
+ ws281x.write(port3, 0x6789AB);
+ ws281x.write(port3, 0x789ABC);
+ ws281x.write(port3, 0x89ABCD);
+ ws281x.write(port3, 0x9ABCDE);
+ ws281x.write(port3, 0xABCDEF);
+ ws281x.write(port3, 0xBCDEF0);
+ ws281x.write(port3, 0xCDEF01);
+ ws281x.write(port3, 0xDEF012);
+ ws281x.write(port3, 0xEF0123);
+ ws281x.write(port3, 0xF01234);
+}
+
+void loop() {
+
+ delay(1);
+}
+
+
+
diff --git a/verilog/dv/arduino_ws281x/arduino_ws281x_tb.v b/verilog/dv/arduino_ws281x/arduino_ws281x_tb.v
new file mode 100644
index 0000000..a6cc886
--- /dev/null
+++ b/verilog/dv/arduino_ws281x/arduino_ws281x_tb.v
@@ -0,0 +1,572 @@
+////////////////////////////////////////////////////////////////////////////
+// SPDX-FileCopyrightText: 2021 , Dinesh Annayya
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+// SPDX-FileContributor: Modified by Dinesh Annayya <dinesha@opencores.org>
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Standalone User validation Test bench ////
+//// ////
+//// This file is part of the riscdunio cores project ////
+//// https://github.com/dineshannayya/riscdunio.git ////
+//// ////
+//// Description ////
+//// This is a standalone test bench to validate the ////
+//// Digital core. ////
+//// This test bench to validate ws281x driver ////
+//// ////
+//// To Do: ////
+//// nothing ////
+//// ////
+//// Author(s): ////
+//// - Dinesh Annayya, dinesh.annayya@gmail.com ////
+//// ////
+//// Revision : ////
+//// 0.1 - 29th July 2022, Dinesh A ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2000 Authors and OPENCORES.ORG ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+
+`default_nettype wire
+
+`timescale 1 ns / 1 ns
+
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
+`include "is62wvs1288.v"
+`include "uart_agent.v"
+`include "bfm_ws281x.sv"
+
+`define TB_HEX "arduino_ws281x.hex"
+`define TB_TOP arduino_ws281x_tb
+
+module `TB_TOP;
+ reg clock;
+ reg wb_rst_i;
+ reg power1, power2;
+ reg power3, power4;
+
+ reg wbd_ext_cyc_i; // strobe/request
+ reg wbd_ext_stb_i; // strobe/request
+ reg [31:0] wbd_ext_adr_i; // address
+ reg wbd_ext_we_i; // write
+ reg [31:0] wbd_ext_dat_i; // data output
+ reg [3:0] wbd_ext_sel_i; // byte enable
+
+ wire [31:0] wbd_ext_dat_o; // data input
+ wire wbd_ext_ack_o; // acknowlegement
+ wire wbd_ext_err_o; // error
+
+ // User I/O
+ wire [37:0] io_oeb;
+ wire [37:0] io_out;
+ wire [37:0] io_in;
+
+ wire gpio;
+ wire [37:0] mprj_io;
+ wire [7:0] mprj_io_0;
+ reg test_fail;
+ reg [31:0] read_data;
+ reg flag ;
+ reg compare_start ; // User Need to make sure that compare start match with RiscV core completing initial booting
+
+ reg [31:0] rx_wcnt ;
+ reg [31:0] check_sum ;
+
+ integer d_risc_id;
+
+ integer i,j;
+
+//-----------------------------------------------
+// WS281X BFM integration
+//----------------------------------------------
+parameter WS2811_LS = 0;
+parameter WS2811_HS = 1;
+parameter WS2812_HS = 2;
+parameter WS2812S_HS = 3;
+parameter WS2812B_HS = 4;
+
+wire [3:0] ws281x_port ;
+reg ws281x_enb ;
+
+
+
+ // 50Mhz CLock
+ always #10 clock <= (clock === 1'b0);
+
+ initial begin
+ clock = 0;
+ flag = 0;
+ compare_start = 0;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ end
+
+ `ifdef WFDUMP
+ initial begin
+ $dumpfile("simx.vcd");
+ $dumpvars(3, `TB_TOP);
+ $dumpvars(0, `TB_TOP.u_top.u_riscv_top);
+ $dumpvars(0, `TB_TOP.u_top.u_pinmux);
+ $dumpvars(0, `TB_TOP.u_top.u_uart_i2c_usb_spi);
+ end
+ `endif
+
+
+
+
+/**********************************************************************
+ Arduino Digital PinMapping
+* Pin Mapping Arduino ATMGE CONFIG
+* ATMEGA328 Port caravel Pin Mapping
+* Pin-1 22 PC6/WS[0]/RESET* digital_io[5]
+* Pin-2 0 PD0/WS[0]/RXD[0] digital_io[6]
+* Pin-3 1 PD1/WS[0]/TXD[0] digital_io[7]
+* Pin-4 2 PD2/WS[0]/RXD[1]/INT0 digital_io[8]
+* Pin-5 3 PD3/WS[1]INT1/OC2B(PWM0) digital_io[9]
+* Pin-6 4 PD4/WS[1]TXD[1] digital_io[10]
+* Pin-7 VCC -
+* Pin-8 GND -
+* Pin-9 20 PB6/WS[1]/XTAL1/TOSC1 digital_io[11]
+* Pin-10 21 PB7/WS[1]/XTAL2/TOSC2 digital_io[12]
+* Pin-11 5 PD5/WS[2]/SS[3]/OC0B(PWM1)/T1 digital_io[13]
+* Pin-12 6 PD6/WS[2]/SS[2]/OC0A(PWM2)/AIN0 digital_io[14]/analog_io[2]
+* Pin-13 7 PD7/WS[2]/A1N1 digital_io[15]/analog_io[3]
+* Pin-14 8 PB0/WS[2]/CLKO/ICP1 digital_io[16]
+* Pin-15 9 PB1/WS[3]/SS[1]OC1A(PWM3) digital_io[17]
+* Pin-16 10 PB2/WS[3]/SS[0]/OC1B(PWM4) digital_io[18]
+* Pin-17 11 PB3/WS[3]/MOSI/OC2A(PWM5) digital_io[19]
+* Pin-18 12 PB4/WS[3]/MISO digital_io[20]
+* Pin-19 13 PB5/SCK digital_io[21]
+* Pin-20 AVCC -
+* Pin-21 AREF analog_io[10]
+* Pin-22 GND -
+* Pin-23 14 PC0/ADC0 digital_io[22]/analog_io[11]
+* Pin-24 15 PC1/ADC1 digital_io[23]/analog_io[12]
+* Pin-25 16 PC2/ADC2 digital_io[24]/analog_io[13]
+* Pin-26 17 PC3/ADC3 digital_io[25]/analog_io[14]
+* Pin-27 18 PC4/ADC4/SDA digital_io[26]/analog_io[15]
+* Pin-28 19 PC5/ADC5/SCL digital_io[27]/analog_io[16]
+*****************************************************************************/
+
+
+ initial begin
+
+ ws281x_enb = 0;
+
+ $value$plusargs("risc_core_id=%d", d_risc_id);
+
+ #200; // Wait for reset removal
+ repeat (10) @(posedge clock);
+ $display("Monitor: Standalone User Risc Boot Test Started");
+
+ // Remove Wb Reset
+ wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+
+ repeat (2) @(posedge clock);
+ #1;
+ // Remove all the reset
+ if(d_risc_id == 0) begin
+ $display("STATUS: Working with Risc core 0");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+ end else if(d_risc_id == 1) begin
+ $display("STATUS: Working with Risc core 1");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
+ end else if(d_risc_id == 2) begin
+ $display("STATUS: Working with Risc core 2");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h41F);
+ end else if(d_risc_id == 3) begin
+ $display("STATUS: Working with Risc core 3");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h81F);
+ end
+
+ repeat (100) @(posedge clock); // wait for Processor Get Ready
+
+
+ repeat (40000) @(posedge clock); // wait for Processor Get Ready
+ ws281x_enb = 1;
+ flag = 0;
+ check_sum = 0;
+ compare_start = 1;
+
+ fork
+ begin
+ wait(u_ws281x_port0.rx_wcnt == 16);
+ wait(u_ws281x_port1.rx_wcnt == 16);
+ wait(u_ws281x_port2.rx_wcnt == 16);
+ wait(u_ws281x_port3.rx_wcnt == 16);
+ end
+ begin
+ repeat (300000) @(posedge clock); // wait for Processor Get Ready
+ end
+ join_any
+
+ #1000
+
+ test_fail = 0;
+ rx_wcnt = u_ws281x_port0.rx_wcnt + u_ws281x_port1.rx_wcnt + u_ws281x_port2.rx_wcnt + u_ws281x_port3.rx_wcnt;
+ check_sum = u_ws281x_port0.check_sum + u_ws281x_port1.check_sum + u_ws281x_port2.check_sum + u_ws281x_port3.check_sum;
+
+ $display("Total Rx Cnt: %d Check Sum : %x ",rx_wcnt, check_sum);
+ // Check
+ // if all the 102 byte received
+ // if no error
+ if(rx_wcnt != 64) test_fail = 1;
+ if(check_sum != 32'h2ffe8) test_fail = 1;
+
+
+ $display("###################################################");
+ if(test_fail == 0) begin
+ `ifdef GL
+ $display("Monitor: Standalone String (GL) Passed");
+ `else
+ $display("Monitor: Standalone String (RTL) Passed");
+ `endif
+ end else begin
+ `ifdef GL
+ $display("Monitor: Standalone String (GL) Failed");
+ `else
+ $display("Monitor: Standalone String (RTL) Failed");
+ `endif
+ end
+ $display("###################################################");
+ $finish;
+ end
+
+ initial begin
+ wb_rst_i <= 1'b1;
+ #100;
+ wb_rst_i <= 1'b0; // Release reset
+ end
+wire USER_VDD1V8 = 1'b1;
+wire VSS = 1'b0;
+
+user_project_wrapper u_top(
+`ifdef USE_POWER_PINS
+ .vccd1(USER_VDD1V8), // User area 1 1.8V supply
+ .vssd1(VSS), // User area 1 digital ground
+`endif
+ .wb_clk_i (clock), // System clock
+ .user_clock2 (1'b1), // Real-time clock
+ .wb_rst_i (wb_rst_i), // Regular Reset signal
+
+ .wbs_cyc_i (wbd_ext_cyc_i), // strobe/request
+ .wbs_stb_i (wbd_ext_stb_i), // strobe/request
+ .wbs_adr_i (wbd_ext_adr_i), // address
+ .wbs_we_i (wbd_ext_we_i), // write
+ .wbs_dat_i (wbd_ext_dat_i), // data output
+ .wbs_sel_i (wbd_ext_sel_i), // byte enable
+
+ .wbs_dat_o (wbd_ext_dat_o), // data input
+ .wbs_ack_o (wbd_ext_ack_o), // acknowlegement
+
+
+ // Logic Analyzer Signals
+ .la_data_in ('1) ,
+ .la_data_out (),
+ .la_oenb ('0),
+
+
+ // IOs
+ .io_in (io_in) ,
+ .io_out (io_out) ,
+ .io_oeb (io_oeb) ,
+
+ .user_irq ()
+
+);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
+//assign io_in[16] = 1'b0 ; // SPIS SCK
+
+`ifndef GL // Drive Power for Hold Fix Buf
+ // All standard cell need power hook-up for functionality work
+ initial begin
+
+ end
+`endif
+
+//------------------------------------------------------
+// Integrate the Serial flash with qurd support to
+// user core using the gpio pads
+// ----------------------------------------------------
+
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
+ // Creating Pad Delay
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
+
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
+
+ // Quard flash
+ s25fl256s #(.mem_file_name(`TB_HEX),
+ .otp_file_name("none"),
+ .TimingModel("S25FL512SAGMFI010_F_30pF"))
+ u_spi_flash_256mb (
+ // Data Inputs/Outputs
+ .SI (flash_io0),
+ .SO (flash_io1),
+ // Controls
+ .SCK (flash_clk),
+ .CSNeg (flash_csb),
+ .WPNeg (flash_io2),
+ .HOLDNeg (flash_io3),
+ .RSTNeg (!wb_rst_i)
+
+ );
+
+ wire spiram_csb = io_out[31];
+
+ is62wvs1288 #(.mem_file_name("none"))
+ u_sram (
+ // Data Inputs/Outputs
+ .io0 (flash_io0),
+ .io1 (flash_io1),
+ // Controls
+ .clk (flash_clk),
+ .csb (spiram_csb),
+ .io2 (flash_io2),
+ .io3 (flash_io3)
+ );
+
+//-----------------------------------------------
+// WS281X BFM integration
+//----------------------------------------------
+assign ws281x_port[0] = io_out[8];
+
+bfm_ws281x #(
+ .PORT_ID(0),
+ .MODE(WS2811_HS)) u_ws281x_port0(
+ .reset_n (!wb_rst_i ),
+ .clk (clock ),
+ .enb (ws281x_enb ),
+ .rxd (ws281x_port[0])
+ );
+
+//-----------------------------------------------
+// WS281X BFM integration
+//----------------------------------------------
+assign ws281x_port[1] = io_out[9];
+
+bfm_ws281x #(
+ .PORT_ID(1),
+ .MODE(WS2811_HS)) u_ws281x_port1(
+ .reset_n (!wb_rst_i ),
+ .clk (clock ),
+ .enb (ws281x_enb ),
+ .rxd (ws281x_port[1])
+ );
+
+//-----------------------------------------------
+// WS281X BFM integration
+//----------------------------------------------
+assign ws281x_port[2] = io_out[13];
+
+bfm_ws281x #(
+ .PORT_ID(2),
+ .MODE(WS2811_HS)) u_ws281x_port2(
+ .reset_n (!wb_rst_i ),
+ .clk (clock ),
+ .enb (ws281x_enb ),
+ .rxd (ws281x_port[2])
+ );
+
+//-----------------------------------------------
+// WS281X BFM integration
+//----------------------------------------------
+assign ws281x_port[3] = io_out[17];
+
+bfm_ws281x #(
+ .PORT_ID(3),
+ .MODE(WS2811_HS)) u_ws281x_port3(
+ .reset_n (!wb_rst_i ),
+ .clk (clock ),
+ .enb (ws281x_enb ),
+ .rxd (ws281x_port[3])
+ );
+//----------------------------
+// All the task are defined here
+//----------------------------
+
+
+
+task wb_user_core_write;
+input [31:0] address;
+input [31:0] data;
+begin
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_adr_i =address; // address
+ wbd_ext_we_i ='h1; // write
+ wbd_ext_dat_i =data; // data output
+ wbd_ext_sel_i ='hF; // byte enable
+ wbd_ext_cyc_i ='h1; // strobe/request
+ wbd_ext_stb_i ='h1; // strobe/request
+ wait(wbd_ext_ack_o == 1);
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
+ repeat (2) @(posedge clock);
+end
+endtask
+
+task wb_user_core_read;
+input [31:0] address;
+output [31:0] data;
+reg [31:0] data;
+begin
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_adr_i =address; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='0; // data output
+ wbd_ext_sel_i ='hF; // byte enable
+ wbd_ext_cyc_i ='h1; // strobe/request
+ wbd_ext_stb_i ='h1; // strobe/request
+ wait(wbd_ext_ack_o == 1);
+ repeat (1) @(negedge clock);
+ data = wbd_ext_dat_o;
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ $display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
+ repeat (2) @(posedge clock);
+end
+endtask
+
+task wb_user_core_read_check;
+input [31:0] address;
+output [31:0] data;
+input [31:0] cmp_data;
+reg [31:0] data;
+begin
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_adr_i =address; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='0; // data output
+ wbd_ext_sel_i ='hF; // byte enable
+ wbd_ext_cyc_i ='h1; // strobe/request
+ wbd_ext_stb_i ='h1; // strobe/request
+ wait(wbd_ext_ack_o == 1);
+ repeat (1) @(negedge clock);
+ data = wbd_ext_dat_o;
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ if(data !== cmp_data) begin
+ $display("ERROR : WB USER ACCESS READ Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
+ test_fail = 1;
+ end else begin
+ $display("STATUS: WB USER ACCESS READ Address : 0x%x, Data : 0x%x",address,data);
+ end
+ repeat (2) @(posedge clock);
+end
+endtask
+
+`ifdef GL
+
+wire wbd_spi_stb_i = u_top.u_qspi_master.wbd_stb_i;
+wire wbd_spi_ack_o = u_top.u_qspi_master.wbd_ack_o;
+wire wbd_spi_we_i = u_top.u_qspi_master.wbd_we_i;
+wire [31:0] wbd_spi_adr_i = u_top.u_qspi_master.wbd_adr_i;
+wire [31:0] wbd_spi_dat_i = u_top.u_qspi_master.wbd_dat_i;
+wire [31:0] wbd_spi_dat_o = u_top.u_qspi_master.wbd_dat_o;
+wire [3:0] wbd_spi_sel_i = u_top.u_qspi_master.wbd_sel_i;
+
+wire wbd_uart_stb_i = u_top.u_uart_i2c_usb_spi.reg_cs;
+wire wbd_uart_ack_o = u_top.u_uart_i2c_usb_spi.reg_ack;
+wire wbd_uart_we_i = u_top.u_uart_i2c_usb_spi.reg_wr;
+wire [8:0] wbd_uart_adr_i = u_top.u_uart_i2c_usb_spi.reg_addr;
+wire [7:0] wbd_uart_dat_i = u_top.u_uart_i2c_usb_spi.reg_wdata;
+wire [7:0] wbd_uart_dat_o = u_top.u_uart_i2c_usb_spi.reg_rdata;
+wire wbd_uart_sel_i = u_top.u_uart_i2c_usb_spi.reg_be;
+
+`endif
+
+/**
+`ifdef GL
+//-----------------------------------------------------------------------------
+// RISC IMEM amd DMEM Monitoring TASK
+//-----------------------------------------------------------------------------
+
+`define RISC_CORE user_uart_tb.u_top.u_core.u_riscv_top
+
+always@(posedge `RISC_CORE.wb_clk) begin
+ if(`RISC_CORE.wbd_imem_ack_i)
+ $display("RISCV-DEBUG => IMEM ADDRESS: %x Read Data : %x", `RISC_CORE.wbd_imem_adr_o,`RISC_CORE.wbd_imem_dat_i);
+ if(`RISC_CORE.wbd_dmem_ack_i && `RISC_CORE.wbd_dmem_we_o)
+ $display("RISCV-DEBUG => DMEM ADDRESS: %x Write Data: %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_o);
+ if(`RISC_CORE.wbd_dmem_ack_i && !`RISC_CORE.wbd_dmem_we_o)
+ $display("RISCV-DEBUG => DMEM ADDRESS: %x READ Data : %x Resonse: %x", `RISC_CORE.wbd_dmem_adr_o,`RISC_CORE.wbd_dmem_dat_i);
+end
+
+`endif
+**/
+endmodule
+`include "s25fl256s.sv"
+`default_nettype wire
diff --git a/verilog/dv/bfm/bfm_ws281x.sv b/verilog/dv/bfm/bfm_ws281x.sv
new file mode 100644
index 0000000..6caa57c
--- /dev/null
+++ b/verilog/dv/bfm/bfm_ws281x.sv
@@ -0,0 +1,225 @@
+
+`timescale 1 ns / 1 ns
+
+module bfm_ws281x #(
+ parameter PORT_ID = 0,
+ parameter MODE = 0) (
+ input logic reset_n,
+ input logic clk,
+ input logic enb,
+ input logic rxd
+ );
+
+//---------------------------------------------------
+// Parameter decleration
+//---------------------------------------------------
+parameter WS2811_LS = 0;
+parameter WS2811_HS = 1;
+parameter WS2812_HS = 2;
+parameter WS2812S_HS = 3;
+parameter WS2812B_HS = 4;
+
+
+parameter WS281X_LS_PERIOD = 2500 ; // 400Khz - 2.5us
+parameter WS281X_HS_PERIOD = 1250 ; // 800Khz - 1.25us
+
+parameter WS2811_LS_TOH = 500 ;// 0.5us - 500ns
+parameter WS2811_LS_T1H = 1200 ;// 1.2us - 1200ns
+
+parameter WS2811_HS_TOH = 250 ;// 0.25us - 250ns
+parameter WS2811_HS_T1H = 600 ;// 0.6us - 600ns
+
+parameter WS2812_HS_TOH = 350 ;// 0.35us - 350ns
+parameter WS2812_HS_T1H = 700 ;// 0.7us - 700ns
+
+parameter WS2812S_HS_TOH = 350 ;// 0.35us - 350ns
+parameter WS2812S_HS_T1H = 700 ;// 0.7us - 700ns
+
+parameter WS2812B_HS_TOH = 350 ;// 0.35us - 350ns
+parameter WS2812B_HS_T1H = 900 ;// 0.9us - 900ns
+
+parameter WS281X_TOLERENCE = 150 ; // 150ns
+
+parameter WS281X_RST = 50000 ;// 50us - 50000ns
+
+parameter WS281X_PERIOD = (MODE == WS2811_LS) ? WS281X_LS_PERIOD :
+ (MODE == WS2811_HS) ? WS281X_HS_PERIOD :
+ (MODE == WS2812_HS) ? WS281X_HS_PERIOD :
+ (MODE == WS2812S_HS) ? WS281X_HS_PERIOD :
+ (MODE == WS2812B_HS) ? WS281X_HS_PERIOD : WS281X_LS_PERIOD;
+
+parameter WS281X_TOH = (MODE == WS2811_LS) ? WS2811_LS_TOH :
+ (MODE == WS2811_HS) ? WS2811_HS_TOH :
+ (MODE == WS2812_HS) ? WS2812S_HS_TOH :
+ (MODE == WS2812S_HS) ? WS2812S_HS_TOH :
+ (MODE == WS2812B_HS) ? WS2812B_HS_TOH : WS2811_LS_TOH;
+
+parameter WS281X_T1H = (MODE == WS2811_LS) ? WS2811_LS_T1H :
+ (MODE == WS2811_HS) ? WS2811_HS_T1H :
+ (MODE == WS2812_HS) ? WS2812S_HS_T1H :
+ (MODE == WS2812S_HS) ? WS2812S_HS_T1H :
+ (MODE == WS2812B_HS) ? WS2812B_HS_T1H : WS2811_LS_T1H;
+
+
+//---------------------------------------------------------
+// FSM State
+//---------------------------------------------------------
+parameter STATE_RESET = 3'b000;
+parameter STATE_WAIT_POS_EDGE = 3'b001;
+parameter STATE_WAIT_NEG_EDGE = 3'b010;
+parameter STATE_DATA0_LOW = 3'b011;
+parameter STATE_DATA1_LOW = 3'b100;
+
+//---------------------------------------------------
+// Variable decleration
+//---------------------------------------------------
+logic [15:0] rx_wcnt ;
+logic [15:0] clk_cnt ;
+logic [7:0] bit_cnt ;
+logic [15:0] check_sum ;
+logic [23:0] led_data ;
+time neg_edge_time ;
+time pos_edge_time ;
+time time_ref ;
+logic [2:0] state ;
+
+
+always @(negedge rxd) begin
+ neg_edge_time = $time;
+end
+
+always @(posedge rxd) begin
+ pos_edge_time = $time;
+end
+
+
+always @ (posedge clk) begin
+ if(reset_n == 0) begin
+ rx_wcnt = 0; // rx word count
+ bit_cnt = 0; // bit count
+ clk_cnt = 0; // clock edge count
+ check_sum = 0;
+ state = STATE_RESET;
+ time_ref = $time;
+ led_data = 0;
+ end else begin
+ if(enb == 0) begin
+ state = STATE_RESET;
+ end else begin
+ case(state)
+ STATE_RESET: begin
+ if(rxd == 0) begin
+ if(($time - time_ref) > WS281X_RST) begin
+ $display("STATUS-WS281X-%0d: RESET PHASE DETECTED",PORT_ID);
+ state = STATE_WAIT_POS_EDGE;
+ end
+ end else begin
+ time_ref = $time;
+ $display("ERROR-WS281X-%0d: Out of Spec Positive Pulse Width Detected at Reset Phase : %t",PORT_ID,$time);
+ #1000;
+ $stop;
+ end
+ end
+ STATE_WAIT_POS_EDGE: begin
+ if(rxd == 1) begin
+ state = STATE_WAIT_NEG_EDGE;
+ end
+ end
+ STATE_WAIT_NEG_EDGE: begin
+ if(rxd == 0) begin
+ if(((neg_edge_time-pos_edge_time) > (WS281X_TOH-WS281X_TOLERENCE)) &&
+ ((neg_edge_time-pos_edge_time) < (WS281X_TOH+WS281X_TOLERENCE))) begin
+ // Check of the Width Match with Data-0: High Pulse width
+ state = STATE_DATA0_LOW;
+ end else if(((neg_edge_time-pos_edge_time) > (WS281X_T1H-WS281X_TOLERENCE)) &&
+ (neg_edge_time-pos_edge_time) < (WS281X_T1H+WS281X_TOLERENCE)) begin
+ // Check of the Width Match with Data-1: High Pulse width
+ state = STATE_DATA1_LOW;
+ end else begin
+ $display("ERROR-WS281X-%0d: Out of Spec Positive Pulse Width Detected : %t",PORT_ID,neg_edge_time-pos_edge_time);
+ #1000;
+ $stop;
+ end
+ end else if(($time-pos_edge_time) > (WS281X_T1H+WS281X_TOLERENCE)) begin
+ $display("ERROR-WS281X-%0d: Out of Spec Positive Pulse Width Detected : %t",PORT_ID,$time);
+ #1000;
+ $stop;
+ end
+ end
+
+ // Check Data low period for DATA-0
+ STATE_DATA0_LOW: begin
+ if(rxd == 1) begin
+ if(((pos_edge_time-neg_edge_time) > (WS281X_PERIOD-WS281X_TOH-WS281X_TOLERENCE)) &&
+ ((pos_edge_time-neg_edge_time) < (WS281X_PERIOD-WS281X_TOH+WS281X_TOLERENCE))) begin
+ // Check of the Width Match with Data-0: Neg Pulse width
+ led_data = led_data << 1; // Data is zero
+ bit_cnt = bit_cnt+1;
+ if(bit_cnt == 24) begin
+ bit_cnt = 0;
+ rx_wcnt = rx_wcnt+1;
+ $display("STATUS-WS281X-%0d: Word Cnt: %d Green: %x Red: %x Blue: %x",PORT_ID,rx_wcnt,led_data[23:16],led_data[15:8],led_data[7:0]);
+ check_sum = check_sum+{led_data[23:16],led_data[15:8],led_data[7:0]};
+ end
+ state = STATE_WAIT_POS_EDGE;
+ end else begin
+ $display("ERROR-WS281X-%0d: Data-0 => Out of Spec Negative Pulse Width Detected : %t",PORT_ID,pos_edge_time-neg_edge_time);
+ #1000;
+ $stop;
+ end
+ end else begin
+ if((($time-neg_edge_time) > (WS281X_PERIOD-WS281X_TOH+WS281X_TOLERENCE))) begin
+ led_data = led_data << 1; // Data is zero
+ bit_cnt = bit_cnt+1;
+ if(bit_cnt != 24) begin
+ $display("ERROR-WS281X-%0d: Partial Data Detected , Rx Count: %d Bit count: %d",PORT_ID,rx_wcnt,bit_cnt);
+ #1000;
+ $stop;
+ end
+ rx_wcnt = rx_wcnt+1;
+ $display("STATUS-WS281X-%0d: Word Cnt: %d Green: %x Red: %x Blue: %x",PORT_ID,rx_wcnt,led_data[23:16],led_data[15:8],led_data[7:0]);
+ check_sum = check_sum+{led_data[23:16],led_data[15:8],led_data[7:0]};
+ time_ref = $time;
+ state = STATE_RESET;
+ end
+ end
+ end
+ // Check Data low period for DATA-1
+ STATE_DATA1_LOW: begin
+ if(rxd == 1) begin
+ if(((pos_edge_time-neg_edge_time) > (WS281X_PERIOD-WS281X_T1H-WS281X_TOLERENCE)) &&
+ ((pos_edge_time-neg_edge_time) < (WS281X_PERIOD-WS281X_T1H+WS281X_TOLERENCE))) begin
+ // Check of the Width Match with Data-0: Neg Pulse width
+ led_data = (led_data << 1) | 1'b1; // Data is high
+ bit_cnt = bit_cnt+1;
+ if(bit_cnt == 24) begin
+ bit_cnt = 0;
+ rx_wcnt = rx_wcnt+1;
+ $display("STATUS-WS281X-%0d: Word Cnt: %d Green: %x Red: %x Blue: %x",PORT_ID,rx_wcnt,led_data[23:16],led_data[15:8],led_data[7:0]);
+ check_sum = check_sum+{led_data[23:16],led_data[15:8],led_data[7:0]};
+ end
+ state = STATE_WAIT_POS_EDGE;
+ end else begin
+ if((($time-neg_edge_time) > (WS281X_PERIOD-WS281X_T1H+WS281X_TOLERENCE))) begin
+ led_data = (led_data << 1) | 1'b1; // Data is Hih
+ bit_cnt = bit_cnt+1;
+ if(bit_cnt != 24) begin
+ $display("ERROR-WS281X-%0d: Partial Data Detected , Rx Count: %d Bit count: %d",PORT_ID,rx_wcnt,bit_cnt);
+ #1000;
+ $stop;
+ end
+ rx_wcnt = rx_wcnt+1;
+ $display("STATUS-WS281X-%0d: Word Cnt: %d Green: %x Red: %x Blue: %x",PORT_ID,rx_wcnt,led_data[23:16],led_data[15:8],led_data[7:0]);
+ check_sum = check_sum+{led_data[23:16],led_data[15:8],led_data[7:0]};
+ time_ref = $time;
+ state = STATE_RESET;
+ end
+ end
+ end
+ end
+ endcase
+ end
+ end
+end
+
+endmodule
diff --git a/verilog/dv/c_func/inc/ext_reg_map.h b/verilog/dv/c_func/inc/ext_reg_map.h
index cdb04f3..c5a46c0 100644
--- a/verilog/dv/c_func/inc/ext_reg_map.h
+++ b/verilog/dv/c_func/inc/ext_reg_map.h
@@ -11,54 +11,53 @@
#define reg_glbl_intr_msk (*(volatile uint32_t*)0x3002000C) // reg_3 - Global Interrupt Mask
#define reg_glbl_intr (*(volatile uint32_t*)0x30020010) // reg_4 - Global Interrupt
#define reg_glbl_multi_func (*(volatile uint32_t*)0x30020014) // reg_5 - GPIO Multi Function
-#define reg_glbl_soft_reg_0 (*(volatile uint32_t*)0x30020018) // reg_6 - Soft Register-0
-#define reg_glbl_soft_reg_1 (*(volatile uint32_t*)0x3002001C) // reg_7 - Sof Register-1
-#define reg_glbl_soft_reg_2 (*(volatile uint32_t*)0x30020020) // reg_8 - Sof Register-2
-#define reg_glbl_soft_reg_3 (*(volatile uint32_t*)0x30020024) // reg_9 - Sof Register-3
-#define reg_glbl_soft_reg_4 (*(volatile uint32_t*)0x30020028) // reg_10 - Sof Register-4
-#define reg_glbl_soft_reg_5 (*(volatile uint32_t*)0x3002002C) // reg_11 - Sof Register-5
+#define reg_glbl_clk_ctrl (*(volatile uint32_t*)0x30020018) // reg_6 - RTC/USB Clock control
+#define reg_glbl_pad_strap (*(volatile uint32_t*)0x30020030) // reg_6 - RTC/USB Clock control
+#define reg_glbl_strap_sticky (*(volatile uint32_t*)0x30020034) // reg_6 - RTC/USB Clock control
+#define reg_glbl_system_strap (*(volatile uint32_t*)0x30020038) // reg_6 - RTC/USB Clock control
+#define reg_glbl_mail_box (*(volatile uint32_t*)0x3002003C) // reg_15 - Mail Box
-#define reg_gpio_dsel (*(volatile uint32_t*)0x30020040) // reg_0 - GPIO Direction Select
-#define reg_gpio_type (*(volatile uint32_t*)0x30020044) // reg_1 - GPIO TYPE - Static/Waveform
-#define reg_gpio_idata (*(volatile uint32_t*)0x30020048) // reg_2 - GPIO Data In
-#define reg_gpio_odata (*(volatile uint32_t*)0x3002004C) // reg_3 - GPIO Data Out
-#define reg_gpio_intr_stat (*(volatile uint32_t*)0x30020050) // reg_4 - GPIO Interrupt status
-#define reg_gpio_intr_clr (*(volatile uint32_t*)0x30020050) // reg_5 - GPIO Interrupt Clear
-#define reg_gpio_intr_set (*(volatile uint32_t*)0x30020054) // reg_6 - GPIO Interrupt Set
-#define reg_gpio_intr_mask (*(volatile uint32_t*)0x30020058) // reg_7 - GPIO Interrupt Mask
-#define reg_gpio_pos_intr (*(volatile uint32_t*)0x3002005C) // reg_8 - GPIO Posedge Interrupt
-#define reg_gpio_neg_intr (*(volatile uint32_t*)0x30020060) // reg_9 - GPIO Neg Interrupt
+#define reg_gpio_dsel (*(volatile uint32_t*)0x30020080) // reg_0 - GPIO Direction Select
+#define reg_gpio_type (*(volatile uint32_t*)0x30020084) // reg_1 - GPIO TYPE - Static/Waveform
+#define reg_gpio_idata (*(volatile uint32_t*)0x30020088) // reg_2 - GPIO Data In
+#define reg_gpio_odata (*(volatile uint32_t*)0x3002008C) // reg_3 - GPIO Data Out
+#define reg_gpio_intr_stat (*(volatile uint32_t*)0x30020090) // reg_4 - GPIO Interrupt status
+#define reg_gpio_intr_clr (*(volatile uint32_t*)0x30020090) // reg_5 - GPIO Interrupt Clear
+#define reg_gpio_intr_set (*(volatile uint32_t*)0x30020094) // reg_6 - GPIO Interrupt Set
+#define reg_gpio_intr_mask (*(volatile uint32_t*)0x30020098) // reg_7 - GPIO Interrupt Mask
+#define reg_gpio_pos_intr (*(volatile uint32_t*)0x3002009C) // reg_8 - GPIO Posedge Interrupt
+#define reg_gpio_neg_intr (*(volatile uint32_t*)0x300200A0) // reg_9 - GPIO Neg Interrupt
-#define reg_pinmux_glbl_cfg (*(volatile uint32_t*)0x30020080) // reg_0 - PWM Reg-0
-#define reg_pinmux_cfg_pwm0 (*(volatile uint32_t*)0x30020084) // reg_1 - PWM Reg-0
-#define reg_pinmux_cfg_pwm1 (*(volatile uint32_t*)0x30020088) // reg_2 - PWM Reg-1
-#define reg_pinmux_cfg_pwm2 (*(volatile uint32_t*)0x3002008C) // reg_3 - PWM Reg-2
-#define reg_pinmux_cfg_pwm3 (*(volatile uint32_t*)0x30020090) // reg_4 - PWM Reg-3
-#define reg_pinmux_cfg_pwm4 (*(volatile uint32_t*)0x30020094) // reg_5 - PWM Reg-4
-#define reg_pinmux_cfg_pwm5 (*(volatile uint32_t*)0x30020098) // reg_6 - PWM Reg-5
+#define reg_pwm_glbl_cfg (*(volatile uint32_t*)0x30020100) // reg_0 - PWM Reg-0
+#define reg_pwm_cfg_pwm0 (*(volatile uint32_t*)0x30020104) // reg_1 - PWM Reg-0
+#define reg_pwm_cfg_pwm1 (*(volatile uint32_t*)0x30020108) // reg_2 - PWM Reg-1
+#define reg_pwm_cfg_pwm2 (*(volatile uint32_t*)0x3002010C) // reg_3 - PWM Reg-2
+#define reg_pwm_cfg_pwm3 (*(volatile uint32_t*)0x30020110) // reg_4 - PWM Reg-3
+#define reg_pwm_cfg_pwm4 (*(volatile uint32_t*)0x30020114) // reg_5 - PWM Reg-4
+#define reg_pwm_cfg_pwm5 (*(volatile uint32_t*)0x30020118) // reg_6 - PWM Reg-5
-#define reg_timer_glbl_cfg (*(volatile uint32_t*)0x300200C0) // reg_0 - Global config
-#define reg_timer_cfg_timer0 (*(volatile uint32_t*)0x300200C4) // reg_1 - Timer-0
-#define reg_timer_cfg_timer1 (*(volatile uint32_t*)0x300200C8) // reg_2 - Timer-1
-#define reg_timer_cfg_timer2 (*(volatile uint32_t*)0x300200CC) // reg_3 - Timer-2
+#define reg_timer_glbl_cfg (*(volatile uint32_t*)0x30020180) // reg_0 - Global config
+#define reg_timer_cfg_timer0 (*(volatile uint32_t*)0x30020184) // reg_1 - Timer-0
+#define reg_timer_cfg_timer1 (*(volatile uint32_t*)0x30020188) // reg_2 - Timer-1
+#define reg_timer_cfg_timer2 (*(volatile uint32_t*)0x3002018C) // reg_3 - Timer-2
-#define reg_sema_lock0 (*(volatile uint32_t*)0x30020100) // reg_0 - Hardware Lock-0
-#define reg_sema_lock1 (*(volatile uint32_t*)0x30020104) // reg_1 - Hardware Lock-1
-#define reg_sema_lock2 (*(volatile uint32_t*)0x30020108) // reg_2 - Hardware Lock-2
-#define reg_sema_lock3 (*(volatile uint32_t*)0x3002010C) // reg_3 - Hardware Lock-3
-#define reg_sema_lock4 (*(volatile uint32_t*)0x30020110) // reg_4 - Hardware Lock-4
-#define reg_sema_lock5 (*(volatile uint32_t*)0x30020114) // reg_5 - Hardware Lock-5
-#define reg_sema_lock6 (*(volatile uint32_t*)0x30020118) // reg_6 - Hardware Lock-6
-#define reg_sema_lock7 (*(volatile uint32_t*)0x3002011C) // reg_7 - Hardware Lock-7
-#define reg_sema_lock8 (*(volatile uint32_t*)0x30020120) // reg_8 - Hardware Lock-8
-#define reg_sema_lock9 (*(volatile uint32_t*)0x30020124) // reg_9 - Hardware Lock-9
-#define reg_sema_lock10 (*(volatile uint32_t*)0x30020128) // reg_10 - Hardware Lock-10
-#define reg_sema_lock11 (*(volatile uint32_t*)0x3002012C) // reg_11 - Hardware Lock-11
-#define reg_sema_lock12 (*(volatile uint32_t*)0x30020130) // reg_12 - Hardware Lock-12
-#define reg_sema_lock13 (*(volatile uint32_t*)0x30020134) // reg_13 - Hardware Lock-13
-#define reg_sema_lock14 (*(volatile uint32_t*)0x30020138) // reg_14 - Hardware Lock-14
-#define reg_sema_lock_cfg (*(volatile uint32_t*)0x3002013C) // reg_15 - Hardware Lock config
-#define reg_sema_lock_stat (*(volatile uint32_t*)0x3002013C) // reg_15 - Hardware Lock Status
+#define reg_sema_lock0 (*(volatile uint32_t*)0x30020200) // reg_0 - Hardware Lock-0
+#define reg_sema_lock1 (*(volatile uint32_t*)0x30020204) // reg_1 - Hardware Lock-1
+#define reg_sema_lock2 (*(volatile uint32_t*)0x30020208) // reg_2 - Hardware Lock-2
+#define reg_sema_lock3 (*(volatile uint32_t*)0x3002020C) // reg_3 - Hardware Lock-3
+#define reg_sema_lock4 (*(volatile uint32_t*)0x30020210) // reg_4 - Hardware Lock-4
+#define reg_sema_lock5 (*(volatile uint32_t*)0x30020214) // reg_5 - Hardware Lock-5
+#define reg_sema_lock6 (*(volatile uint32_t*)0x30020218) // reg_6 - Hardware Lock-6
+#define reg_sema_lock7 (*(volatile uint32_t*)0x3002021C) // reg_7 - Hardware Lock-7
+#define reg_sema_lock8 (*(volatile uint32_t*)0x30020220) // reg_8 - Hardware Lock-8
+#define reg_sema_lock9 (*(volatile uint32_t*)0x30020224) // reg_9 - Hardware Lock-9
+#define reg_sema_lock10 (*(volatile uint32_t*)0x30020228) // reg_10 - Hardware Lock-10
+#define reg_sema_lock11 (*(volatile uint32_t*)0x3002022C) // reg_11 - Hardware Lock-11
+#define reg_sema_lock12 (*(volatile uint32_t*)0x30020230) // reg_12 - Hardware Lock-12
+#define reg_sema_lock13 (*(volatile uint32_t*)0x30020234) // reg_13 - Hardware Lock-13
+#define reg_sema_lock14 (*(volatile uint32_t*)0x30020238) // reg_14 - Hardware Lock-14
+#define reg_sema_lock_cfg (*(volatile uint32_t*)0x3002023C) // reg_15 - Hardware Lock config
+#define reg_sema_lock_stat (*(volatile uint32_t*)0x3002023C) // reg_15 - Hardware Lock Status
#define reg_uart0_ctrl (*(volatile uint32_t*)0x30010000) // Reg-0
@@ -81,3 +80,6 @@
#define reg_uart1_txfifo_stat (*(volatile uint32_t*)0x3001011C) // Reg-7
#define reg_uart1_rxfifo_stat (*(volatile uint32_t*)0x30010120) // Reg-8
+
+
+#define reg_mprj_wbhost_ctrl (*(volatile uint32_t*)0x30080000)
diff --git a/verilog/dv/c_func/inc/int_reg_map.h b/verilog/dv/c_func/inc/int_reg_map.h
index 669499d..3e38aed 100644
--- a/verilog/dv/c_func/inc/int_reg_map.h
+++ b/verilog/dv/c_func/inc/int_reg_map.h
@@ -10,55 +10,62 @@
#define reg_glbl_cfg1 (*(volatile uint32_t*)0x10020008) // reg_2 - Global Config-1
#define reg_glbl_intr_msk (*(volatile uint32_t*)0x1002000C) // reg_3 - Global Interrupt Mask
#define reg_glbl_intr (*(volatile uint32_t*)0x10020010) // reg_4 - Global Interrupt
-#define reg_glbl_multi_func (*(volatile uint32_t*)0x10020014) // reg_5 - GPIO Multi Function
-#define reg_glbl_soft_reg_0 (*(volatile uint32_t*)0x10020018) // reg_6 - Soft Register-0
-#define reg_glbl_soft_reg_1 (*(volatile uint32_t*)0x1002001C) // reg_7 - Sof Register-1
-#define reg_glbl_soft_reg_2 (*(volatile uint32_t*)0x10020020) // reg_8 - Sof Register-2
-#define reg_glbl_soft_reg_3 (*(volatile uint32_t*)0x10020024) // reg_9 - Sof Register-3
-#define reg_glbl_soft_reg_4 (*(volatile uint32_t*)0x10020028) // reg_10 - Sof Register-4
-#define reg_glbl_soft_reg_5 (*(volatile uint32_t*)0x1002002C) // reg_11 - Sof Register-5
+#define reg_glbl_multi_func (*(volatile uint32_t*)0x10020014) // reg_5 - GPIO Multi Function
+#define reg_glbl_clk_ctrl (*(volatile uint32_t*)0x10020018) // reg_6 - RTC/USB Clock control
+#define reg_glbl_pad_strap (*(volatile uint32_t*)0x10020030) // reg_6 - RTC/USB Clock control
+#define reg_glbl_strap_sticky (*(volatile uint32_t*)0x10020034) // reg_6 - RTC/USB Clock control
+#define reg_glbl_system_strap (*(volatile uint32_t*)0x10020038) // reg_6 - RTC/USB Clock control
+#define reg_glbl_mail_box (*(volatile uint32_t*)0x1002003C) // reg_15 - Mail Box
+#define reg_glbl_soft_reg_0 (*(volatile uint32_t*)0x10020040) // reg_16 - Soft Register-0
+#define reg_glbl_soft_reg_1 (*(volatile uint32_t*)0x10020044) // reg_17 - Soft Register-1
+#define reg_glbl_soft_reg_2 (*(volatile uint32_t*)0x10020048) // reg_18 - Soft Register-2
+#define reg_glbl_soft_reg_3 (*(volatile uint32_t*)0x1002004C) // reg_19 - Soft Register-3
+#define reg_glbl_soft_reg_4 (*(volatile uint32_t*)0x10020050) // reg_20 - Soft Register-4
+#define reg_glbl_soft_reg_5 (*(volatile uint32_t*)0x10020054) // reg_21 - Soft Register-5
+#define reg_glbl_soft_reg_6 (*(volatile uint32_t*)0x10020058) // reg_22 - Soft Register-6
+#define reg_glbl_soft_reg_7 (*(volatile uint32_t*)0x1002005C) // reg_23 - Soft Register-7
-#define reg_gpio_dsel (*(volatile uint32_t*)0x10020040) // reg_0 - GPIO Direction Select
-#define reg_gpio_type (*(volatile uint32_t*)0x10020044) // reg_1 - GPIO TYPE - Static/Waveform
-#define reg_gpio_idata (*(volatile uint32_t*)0x10020048) // reg_2 - GPIO Data In
-#define reg_gpio_odata (*(volatile uint32_t*)0x1002004C) // reg_3 - GPIO Data Out
-#define reg_gpio_intr_stat (*(volatile uint32_t*)0x10020050) // reg_4 - GPIO Interrupt status
-#define reg_gpio_intr_clr (*(volatile uint32_t*)0x10020050) // reg_5 - GPIO Interrupt Clear
-#define reg_gpio_intr_set (*(volatile uint32_t*)0x10020054) // reg_6 - GPIO Interrupt Set
-#define reg_gpio_intr_mask (*(volatile uint32_t*)0x10020058) // reg_7 - GPIO Interrupt Mask
-#define reg_gpio_pos_intr (*(volatile uint32_t*)0x1002005C) // reg_8 - GPIO Posedge Interrupt
-#define reg_gpio_neg_intr (*(volatile uint32_t*)0x10020060) // reg_9 - GPIO Neg Interrupt
+#define reg_gpio_dsel (*(volatile uint32_t*)0x10020080) // reg_0 - GPIO Direction Select
+#define reg_gpio_type (*(volatile uint32_t*)0x10020084) // reg_1 - GPIO TYPE - Static/Waveform
+#define reg_gpio_idata (*(volatile uint32_t*)0x10020088) // reg_2 - GPIO Data In
+#define reg_gpio_odata (*(volatile uint32_t*)0x1002008C) // reg_3 - GPIO Data Out
+#define reg_gpio_intr_stat (*(volatile uint32_t*)0x10020090) // reg_4 - GPIO Interrupt status
+#define reg_gpio_intr_clr (*(volatile uint32_t*)0x10020090) // reg_5 - GPIO Interrupt Clear
+#define reg_gpio_intr_set (*(volatile uint32_t*)0x10020094) // reg_6 - GPIO Interrupt Set
+#define reg_gpio_intr_mask (*(volatile uint32_t*)0x10020098) // reg_7 - GPIO Interrupt Mask
+#define reg_gpio_pos_intr (*(volatile uint32_t*)0x1002009C) // reg_8 - GPIO Posedge Interrupt
+#define reg_gpio_neg_intr (*(volatile uint32_t*)0x100200A0) // reg_9 - GPIO Neg Interrupt
-#define reg_pinmux_glbl_cfg (*(volatile uint32_t*)0x10020080) // reg_0 - PWM Reg-0
-#define reg_pinmux_cfg_pwm0 (*(volatile uint32_t*)0x10020084) // reg_1 - PWM Reg-0
-#define reg_pinmux_cfg_pwm1 (*(volatile uint32_t*)0x10020088) // reg_2 - PWM Reg-1
-#define reg_pinmux_cfg_pwm2 (*(volatile uint32_t*)0x1002008C) // reg_3 - PWM Reg-2
-#define reg_pinmux_cfg_pwm3 (*(volatile uint32_t*)0x10020090) // reg_4 - PWM Reg-3
-#define reg_pinmux_cfg_pwm4 (*(volatile uint32_t*)0x10020094) // reg_5 - PWM Reg-4
-#define reg_pinmux_cfg_pwm5 (*(volatile uint32_t*)0x10020098) // reg_6 - PWM Reg-5
+#define reg_pwm_glbl_cfg (*(volatile uint32_t*)0x10020100) // reg_0 - PWM Reg-0
+#define reg_pwm_cfg_pwm0 (*(volatile uint32_t*)0x10020104) // reg_1 - PWM Reg-0
+#define reg_pwm_cfg_pwm1 (*(volatile uint32_t*)0x10020108) // reg_2 - PWM Reg-1
+#define reg_pwm_cfg_pwm2 (*(volatile uint32_t*)0x1002011C) // reg_3 - PWM Reg-2
+#define reg_pwm_cfg_pwm3 (*(volatile uint32_t*)0x10020110) // reg_4 - PWM Reg-3
+#define reg_pwm_cfg_pwm4 (*(volatile uint32_t*)0x10020114) // reg_5 - PWM Reg-4
+#define reg_pwm_cfg_pwm5 (*(volatile uint32_t*)0x10020118) // reg_6 - PWM Reg-5
-#define reg_timer_glbl_cfg (*(volatile uint32_t*)0x100200C0) // reg_0 - Global config
-#define reg_timer_cfg_timer0 (*(volatile uint32_t*)0x100200C4) // reg_1 - Timer-0
-#define reg_timer_cfg_timer1 (*(volatile uint32_t*)0x100200C8) // reg_2 - Timer-1
-#define reg_timer_cfg_timer2 (*(volatile uint32_t*)0x100200CC) // reg_3 - Timer-2
+#define reg_timer_glbl_cfg (*(volatile uint32_t*)0x10020180) // reg_0 - Global config
+#define reg_timer_cfg_timer0 (*(volatile uint32_t*)0x10020184) // reg_1 - Timer-0
+#define reg_timer_cfg_timer1 (*(volatile uint32_t*)0x10020188) // reg_2 - Timer-1
+#define reg_timer_cfg_timer2 (*(volatile uint32_t*)0x1002018C) // reg_3 - Timer-2
-#define reg_sema_lock0 (*(volatile uint32_t*)0x10020100) // reg_0 - Hardware Lock-0
-#define reg_sema_lock1 (*(volatile uint32_t*)0x10020104) // reg_1 - Hardware Lock-1
-#define reg_sema_lock2 (*(volatile uint32_t*)0x10020108) // reg_2 - Hardware Lock-2
-#define reg_sema_lock3 (*(volatile uint32_t*)0x1002010C) // reg_3 - Hardware Lock-3
-#define reg_sema_lock4 (*(volatile uint32_t*)0x10020110) // reg_4 - Hardware Lock-4
-#define reg_sema_lock5 (*(volatile uint32_t*)0x10020114) // reg_5 - Hardware Lock-5
-#define reg_sema_lock6 (*(volatile uint32_t*)0x10020118) // reg_6 - Hardware Lock-6
-#define reg_sema_lock7 (*(volatile uint32_t*)0x1002011C) // reg_7 - Hardware Lock-7
-#define reg_sema_lock8 (*(volatile uint32_t*)0x10020120) // reg_8 - Hardware Lock-8
-#define reg_sema_lock9 (*(volatile uint32_t*)0x10020124) // reg_9 - Hardware Lock-9
-#define reg_sema_lock10 (*(volatile uint32_t*)0x10020128) // reg_10 - Hardware Lock-10
-#define reg_sema_lock11 (*(volatile uint32_t*)0x1002012C) // reg_11 - Hardware Lock-11
-#define reg_sema_lock12 (*(volatile uint32_t*)0x10020130) // reg_12 - Hardware Lock-12
-#define reg_sema_lock13 (*(volatile uint32_t*)0x10020134) // reg_13 - Hardware Lock-13
-#define reg_sema_lock14 (*(volatile uint32_t*)0x10020138) // reg_14 - Hardware Lock-14
-#define reg_sema_lock_cfg (*(volatile uint32_t*)0x1002013C) // reg_15 - Hardware Lock config
-#define reg_sema_lock_stat (*(volatile uint32_t*)0x1002013C) // reg_15 - Hardware Lock Status
+#define reg_sema_lock0 (*(volatile uint32_t*)0x10020200) // reg_0 - Hardware Lock-0
+#define reg_sema_lock1 (*(volatile uint32_t*)0x10020204) // reg_1 - Hardware Lock-1
+#define reg_sema_lock2 (*(volatile uint32_t*)0x10020208) // reg_2 - Hardware Lock-2
+#define reg_sema_lock3 (*(volatile uint32_t*)0x1002020C) // reg_3 - Hardware Lock-3
+#define reg_sema_lock4 (*(volatile uint32_t*)0x10020210) // reg_4 - Hardware Lock-4
+#define reg_sema_lock5 (*(volatile uint32_t*)0x10020214) // reg_5 - Hardware Lock-5
+#define reg_sema_lock6 (*(volatile uint32_t*)0x10020218) // reg_6 - Hardware Lock-6
+#define reg_sema_lock7 (*(volatile uint32_t*)0x1002021C) // reg_7 - Hardware Lock-7
+#define reg_sema_lock8 (*(volatile uint32_t*)0x10020220) // reg_8 - Hardware Lock-8
+#define reg_sema_lock9 (*(volatile uint32_t*)0x10020224) // reg_9 - Hardware Lock-9
+#define reg_sema_lock10 (*(volatile uint32_t*)0x10020228) // reg_10 - Hardware Lock-10
+#define reg_sema_lock11 (*(volatile uint32_t*)0x1002022C) // reg_11 - Hardware Lock-11
+#define reg_sema_lock12 (*(volatile uint32_t*)0x10020230) // reg_12 - Hardware Lock-12
+#define reg_sema_lock13 (*(volatile uint32_t*)0x10020234) // reg_13 - Hardware Lock-13
+#define reg_sema_lock14 (*(volatile uint32_t*)0x10020238) // reg_14 - Hardware Lock-14
+#define reg_sema_lock_cfg (*(volatile uint32_t*)0x1002023C) // reg_15 - Hardware Lock config
+#define reg_sema_lock_stat (*(volatile uint32_t*)0x1002023C) // reg_15 - Hardware Lock Status
#define reg_uart0_ctrl (*(volatile uint32_t*)0x10010000) // Reg-0
diff --git a/verilog/dv/common/riscduino_board b/verilog/dv/common/riscduino_board
index 09f42e8..5b5dd05 160000
--- a/verilog/dv/common/riscduino_board
+++ b/verilog/dv/common/riscduino_board
@@ -1 +1 @@
-Subproject commit 09f42e80c78b05785fb7088fb3bff16b2044c6c8
+Subproject commit 5b5dd057677b00948b02288291ad2141f0543108
diff --git a/verilog/dv/model/i2c_slave_model.v b/verilog/dv/model/i2c_slave_model.v
index 83b8f8b..7151c3c 100755
--- a/verilog/dv/model/i2c_slave_model.v
+++ b/verilog/dv/model/i2c_slave_model.v
@@ -100,7 +100,7 @@
//
// Variable declaration
//
- wire debug = 1'b1;
+ reg debug = 1'b1;
reg [7:0] mem [255:0]; // initiate memory
reg [7:0] mem_adr; // memory address
@@ -130,6 +130,7 @@
parameter data_ack = 3'b101;
reg [2:0] state; // synopsys enum_state
+ reg block;
//
// module body
@@ -174,14 +175,14 @@
if(scl)
begin
sta <= #1 1'b1;
- d_sta <= #1 1'b0;
- sto <= #1 1'b0;
+ d_sta <= #1 1'b0;
+ sto <= #1 1'b0;
if(debug)
- $display("DEBUG i2c_slave; start condition detected at %t", $time);
+ $display("DEBUG i2c_slave-%0d: start condition detected at %t",I2C_ADR, $time);
end
else
- sta <= #1 1'b0;
+ sta <= #1 1'b0;
always @(posedge scl)
d_sta <= #1 sta;
@@ -194,7 +195,7 @@
sto <= #1 1'b1;
if(debug)
- $display("DEBUG i2c_slave; stop condition detected at %t", $time);
+ $display("DEBUG i2c_slave-%0d: stop condition detected at %t",I2C_ADR, $time);
end
else
sto <= #1 1'b0;
@@ -206,6 +207,7 @@
always @(negedge scl or posedge sto)
if (sto || (sta && !d_sta) )
begin
+ block <= 0;
state <= #1 idle; // reset statemachine
sda_o <= #1 1'b1;
@@ -219,7 +221,7 @@
case(state) // synopsys full_case parallel_case
idle: // idle state
- if (acc_done && my_adr)
+ if (acc_done && my_adr && !block)
begin
state <= #1 slave_ack;
rw <= #1 sr[0];
@@ -227,9 +229,9 @@
#2;
if(debug && rw)
- $display("DEBUG i2c_slave; command byte received (read) at %t", $time);
+ $display("DEBUG i2c_slave-%0d: command byte received (read) at %t",I2C_ADR, $time);
if(debug && !rw)
- $display("DEBUG i2c_slave; command byte received (write) at %t", $time);
+ $display("DEBUG i2c_slave-%0d: command byte received (write) at %t",I2C_ADR, $time);
if(rw)
begin
@@ -237,11 +239,13 @@
if(debug)
begin
- #2 $display("DEBUG i2c_slave; data block read %x from address %x (1)", mem_do, mem_adr);
- #2 $display("DEBUG i2c_slave; memcheck [%x]=%x", mem_adr, mem[mem_adr]);
+ #2 $display("DEBUG i2c_slave-%0d: data block read %x from address %x (1)",I2C_ADR, mem_do, mem_adr);
+ //#2 $display("DEBUG i2c_slave-%0d: memcheck [%x]=%x",I2C_ADR, mem_adr, mem[mem_adr]);
end
end
- end
+ end else if (acc_done) begin // Wait for Next Start or Stop
+ block <= 1;
+ end
slave_ack:
begin
@@ -264,7 +268,7 @@
sda_o <= #1 !(sr <= 255); // generate i2c_ack, for valid address
if(debug)
- #1 $display("DEBUG i2c_slave; address received. adr=%x, ack=%b", sr, sda_o);
+ #1 $display("DEBUG i2c_slave-%0d; address received. adr=%x, ack=%b",I2C_ADR, sr, sda_o);
end
gma_ack:
@@ -289,7 +293,7 @@
#3 mem_do <= mem[mem_adr];
if(debug)
- #5 $display("DEBUG i2c_slave; data block read %x from address %x (2)", mem_do, mem_adr);
+ #5 $display("DEBUG i2c_slave-%0d: data block read %x from address %x (2)",I2C_ADR, mem_do, mem_adr);
end
if(!rw)
@@ -297,7 +301,7 @@
mem[ mem_adr ] <= #1 sr; // store data in memory
if(debug)
- #2 $display("DEBUG i2c_slave; data block write %x to address %x", sr, mem_adr);
+ #2 $display("DEBUG i2c_slave-%0d: data block write %x to address %x",I2C_ADR, sr, mem_adr);
end
end
end
diff --git a/verilog/dv/riscv_regress/riscv_runtests.sv b/verilog/dv/riscv_regress/riscv_runtests.sv
index a487c7a..0dca105 100644
--- a/verilog/dv/riscv_regress/riscv_runtests.sv
+++ b/verilog/dv/riscv_regress/riscv_runtests.sv
@@ -71,9 +71,9 @@
end
***/
-wire [31:0] pc_curr_ff = (d_risc_id == 0) ? u_top.u_riscv_top.i_core_top_0.i_pipe_top.i_pipe_exu.pc_curr_ff : u_top.u_riscv_top.i_core_top_1.i_pipe_top.i_pipe_exu.pc_curr_ff;
-wire [31:0] exu2pipe_pc_curr_o = (d_risc_id == 0) ? u_top.u_riscv_top.i_core_top_0.i_pipe_top.i_pipe_exu.exu2pipe_pc_curr_o : u_top.u_riscv_top.i_core_top_1.i_pipe_top.i_pipe_exu.exu2pipe_pc_curr_o;
-wire [31:0] mprf_int_10 = (d_risc_id == 0) ? u_top.u_riscv_top.i_core_top_0.i_pipe_top.i_pipe_mprf.mprf_int[10] : u_top.u_riscv_top.i_core_top_1.i_pipe_top.i_pipe_mprf.mprf_int[10];
+wire [31:0] pc_curr_ff = u_top.u_riscv_top.i_core_top_0.i_pipe_top.i_pipe_exu.pc_curr_ff ;
+wire [31:0] exu2pipe_pc_curr_o = u_top.u_riscv_top.i_core_top_0.i_pipe_top.i_pipe_exu.exu2pipe_pc_curr_o ;
+wire [31:0] mprf_int_10 = u_top.u_riscv_top.i_core_top_0.i_pipe_top.i_pipe_mprf.mprf_int[10] ;
always @(posedge clk) begin
bit test_pass;
@@ -240,10 +240,7 @@
if (f_test != 0) begin
// Launch new test
`ifdef YCR1_TRACE_LOG_EN
- if(d_risc_id == 0)
- u_top.u_riscv_top.i_core_top_0.i_pipe_top.i_tracelog.test_name = test_file;
- else
- u_top.u_riscv_top.i_core_top_1.i_pipe_top.i_tracelog.test_name = test_file;
+ u_top.u_riscv_top.i_core_top_0.i_pipe_top.i_tracelog.test_name = test_file;
`endif // SCR1_TRACE_LOG_EN
//i_memory_tb.test_file = test_file;
//i_memory_tb.test_file_init = 1'b1;
diff --git a/verilog/dv/riscv_regress/user_risc_regress_tb.v b/verilog/dv/riscv_regress/user_risc_regress_tb.v
index e444404..2c53c8c 100644
--- a/verilog/dv/riscv_regress/user_risc_regress_tb.v
+++ b/verilog/dv/riscv_regress/user_risc_regress_tb.v
@@ -233,6 +233,7 @@
$dumpvars(0, user_risc_regress_tb.u_top.u_riscv_top);
$dumpvars(0, user_risc_regress_tb.u_top.u_qspi_master);
$dumpvars(0, user_risc_regress_tb.u_top.u_intercon);
+ $dumpvars(0, user_risc_regress_tb.u_top.u_pinmux);
end
`endif
@@ -361,6 +362,9 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
+assign io_in[16] = 1'b0 ; // SPIS SCK
logic [31:0] riscv_dmem_req_cnt; // cnt dmem req
diff --git a/verilog/dv/uart_master/Makefile b/verilog/dv/uart_master/Makefile
index 3ec839e..12331ba 100644
--- a/verilog/dv/uart_master/Makefile
+++ b/verilog/dv/uart_master/Makefile
@@ -155,12 +155,14 @@
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
iverilog -g2005-sv -Ttyp -DFUNCTIONAL -DSIM -DUSE_POWER_PINS -DUNIT_DELAY=#0.1 \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
-f$(VERILOG_PATH)/includes/includes.rtl.caravel \
- -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) -o $@ $<
+ -o $@ $<
else
iverilog -g2005-sv -DWFDUMP -Ttyp -DFUNCTIONAL -DSIM -DUSE_POWER_PINS -DUNIT_DELAY=#0.1 \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
-f$(VERILOG_PATH)/includes/includes.rtl.caravel \
- -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) -o $@ $<
+ -o $@ $<
endif
endif
diff --git a/verilog/dv/uart_master/uart_master.c b/verilog/dv/uart_master/uart_master.c
index 46d6e97..e1a4bf0 100644
--- a/verilog/dv/uart_master/uart_master.c
+++ b/verilog/dv/uart_master/uart_master.c
@@ -18,7 +18,7 @@
// This include is relative to $CARAVEL_PATH (see Makefile)
#include <defs.h>
#include <stub.c>
-#include "../c_func/inc/user_reg_map.h"
+#include "../c_func/inc/ext_reg_map.h"
// User Project Slaves (0x3000_0000)
@@ -40,7 +40,7 @@
void main()
{
- int bFail = 0;
+ //int bFail = 0;
/*
IO Control Registers
| DM | VTRIP | SLOW | AN_POL | AN_SEL | AN_EN | MOD_SEL | INP_DIS | HOLDH | OEB_N | MGMT_EN |
@@ -62,8 +62,8 @@
/* Set up the housekeeping SPI to be connected internally so */
/* that external pin changes don't affect it. */
- reg_spi_enable = 1;
- reg_wb_enable = 1;
+ //reg_spi_enable = 1;
+ //reg_wb_enable = 1;
// reg_spimaster_config = 0xa002; // Enable, prescaler = 2,
// connect to housekeeping SPI
@@ -71,26 +71,26 @@
// so that the CSB line is not left floating. This allows
// all of the GPIO pins to be used for user functions.
- reg_mprj_io_31 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_30 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_29 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_28 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_27 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_26 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_25 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_24 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_23 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_22 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_21 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_20 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_19 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_18 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_17 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_16 = GPIO_MODE_MGMT_STD_OUTPUT;
+ //reg_mprj_io_31 = GPIO_MODE_MGMT_STD_OUTPUT;
+ //reg_mprj_io_30 = GPIO_MODE_MGMT_STD_OUTPUT;
+ //reg_mprj_io_29 = GPIO_MODE_MGMT_STD_OUTPUT;
+ //reg_mprj_io_28 = GPIO_MODE_MGMT_STD_OUTPUT;
+ //reg_mprj_io_27 = GPIO_MODE_MGMT_STD_OUTPUT;
+ //reg_mprj_io_26 = GPIO_MODE_MGMT_STD_OUTPUT;
+ //reg_mprj_io_25 = GPIO_MODE_MGMT_STD_OUTPUT;
+ //reg_mprj_io_24 = GPIO_MODE_MGMT_STD_OUTPUT;
+ //reg_mprj_io_23 = GPIO_MODE_MGMT_STD_OUTPUT;
+ //reg_mprj_io_22 = GPIO_MODE_MGMT_STD_OUTPUT;
+ //reg_mprj_io_21 = GPIO_MODE_MGMT_STD_OUTPUT;
+ //reg_mprj_io_20 = GPIO_MODE_MGMT_STD_OUTPUT;
+ //reg_mprj_io_19 = GPIO_MODE_MGMT_STD_OUTPUT;
+ //reg_mprj_io_18 = GPIO_MODE_MGMT_STD_OUTPUT;
+ //reg_mprj_io_17 = GPIO_MODE_MGMT_STD_OUTPUT;
+ //reg_mprj_io_16 = GPIO_MODE_MGMT_STD_OUTPUT;
- /* Apply configuration */
- reg_mprj_xfer = 1;
- while (reg_mprj_xfer == 1);
+ // /* Apply configuration */
+ //reg_mprj_xfer = 1;
+ //while (reg_mprj_xfer == 1);
reg_la0_oenb = reg_la0_iena = 0xFFFFFFFF; // [31:0]
@@ -99,50 +99,53 @@
//-----------------------------------------------------
// Start of User Functionality and take over the GPIO Pins
- // ------------------------------------------------------
+ // --------------------------------------------------------------------
// User block decide on the GPIO function
- reg_mprj_io_37 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_36 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_35 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_34 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_33 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_32 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_31 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_30 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_29 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_28 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_27 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_26 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_25 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_24 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_23 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_22 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_21 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_20 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_19 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_18 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_17 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_16 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_15 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_14 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_13 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_12 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_11 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_10 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_9 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_8 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_7 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_6 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_5 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_4 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_3 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_2 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_1 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
- reg_mprj_io_0 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ // io[6] to 37 are set to default bio-direction using user_define.h file
+ //---------------------------------------------------------------------
- /* Apply configuration */
- reg_mprj_xfer = 1;
- while (reg_mprj_xfer == 1);
+ //reg_mprj_io_37 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_36 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_35 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_34 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_33 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_32 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_31 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_30 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_29 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_28 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_27 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_26 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_25 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_24 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_23 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_22 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_21 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_20 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_19 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_18 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_17 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_16 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_15 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_14 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_13 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_12 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_11 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_10 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_9 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_8 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_7 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_6 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_5 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_4 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_3 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_2 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_1 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+ //reg_mprj_io_0 = GPIO_MODE_USER_STD_BIDIRECTIONAL_PULLUP;
+
+ // /* Apply configuration */
+ //reg_mprj_xfer = 1;
+ //while (reg_mprj_xfer == 1);
reg_la0_data = 0x000;
//reg_la0_data = 0x000;
diff --git a/verilog/dv/uart_master/uart_master_tb.v b/verilog/dv/uart_master/uart_master_tb.v
index f49daab..ea30b91 100644
--- a/verilog/dv/uart_master/uart_master_tb.v
+++ b/verilog/dv/uart_master/uart_master_tb.v
@@ -18,7 +18,9 @@
`timescale 1 ns / 1 ps
`include "uart_agent.v"
-module uart_master_tb;
+`define TB_HEX "uart_master.hex"
+`define TB_TOP uart_master_tb
+module `TB_TOP;
reg clock;
reg RSTB;
reg CSB;
@@ -70,13 +72,11 @@
`ifdef WFDUMP
initial begin
$dumpfile("simx.vcd");
- $dumpvars(1, uart_master_tb);
- $dumpvars(1, uart_master_tb.uut);
- $dumpvars(1, uart_master_tb.uut.mprj);
- $dumpvars(1, uart_master_tb.uut.mprj.u_wb_host);
- $dumpvars(1, uart_master_tb.uut.mprj.u_wb_host.u_uart2wb);
- $dumpvars(1, uart_master_tb.tb_master_uart);
- //$dumpvars(2, uart_master_tb.uut.mprj.u_pinmux);
+ $dumpvars(2, `TB_TOP);
+ $dumpvars(0, `TB_TOP.tb_master_uart);
+ $dumpvars(0, `TB_TOP.uut.mprj.u_wb_host.u_uart2wb);
+ $dumpvars(1, `TB_TOP.tb_master_uart);
+ $dumpvars(0, `TB_TOP.uut.mprj.u_pinmux);
end
`endif
@@ -84,7 +84,7 @@
// Repeat cycles of 1000 clock edges as needed to complete testbench
repeat (400) begin
- repeat (1000) @(posedge clock);
+ repeat (10000) @(posedge clock);
// $display("+1000 cycles");
end
$display("%c[1;31m",27);
@@ -101,25 +101,26 @@
initial begin
uart_data_bit = 2'b11;
- uart_stop_bits = 1; // 0: 1 stop bit; 1: 2 stop bit;
+ uart_stop_bits = 0; // 0: 1 stop bit; 1: 2 stop bit;
uart_stick_parity = 0; // 1: force even parity
uart_parity_en = 0; // parity enable
uart_even_odd_parity = 1; // 0: odd parity; 1: even parity
uart_divisor = 15;// divided by n * 16
- uart_timeout = 600;// wait time limit
+ uart_timeout = 200;// wait time limit
uart_fifo_enable = 0; // fifo mode disable
tb_master_uart.debug_mode = 0; // disable debug display
#200; // Wait for reset removal
- wait(checkbits == 16'h AB60);
- $display("Monitor: UART Master Test Started");
+ // wait(checkbits == 16'h AB60);
+ // $display("Monitor: UART Master Test Started");
- repeat (50000) @(posedge clock);
+ repeat (10000) @(posedge clock);
tb_master_uart.uart_init;
tb_master_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity,
uart_stick_parity, uart_timeout, uart_divisor);
//$write ("\n(%t)Response:\n",$time);
+ // Wait for Initial Command Format from the uart master
flag = 0;
while(flag == 0)
begin
@@ -174,11 +175,11 @@
initial begin
RSTB <= 1'b0;
- CSB <= 1'b1; // Force CSB high
+ //CSB <= 1'b1; // Force CSB high
#2000;
RSTB <= 1'b1; // Release reset
#170000;
- CSB = 1'b0; // CSB can be released
+ //CSB = 1'b0; // CSB can be released
end
initial begin // Power-up sequence
@@ -262,8 +263,8 @@
// --------------------------
wire uart_txd,uart_rxd;
-assign uart_txd = mprj_io[35];
-assign mprj_io[34] = uart_rxd ;
+assign uart_txd = mprj_io[23];
+assign mprj_io[22] = uart_rxd ;
uart_agent tb_master_uart(
.mclk (clock ),
@@ -276,6 +277,4 @@
endmodule
-// SSFLASH has 1ps/1ps time scale
-`include "s25fl256s.sv"
`default_nettype wire
diff --git a/verilog/dv/user_aes/user_aes_tb.v b/verilog/dv/user_aes/user_aes_tb.v
index 8d236d4..769596e 100644
--- a/verilog/dv/user_aes/user_aes_tb.v
+++ b/verilog/dv/user_aes/user_aes_tb.v
@@ -194,7 +194,13 @@
end else if(d_risc_id == 1) begin
$display("STATUS: Working with Risc core 1");
wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
- end
+ end else if(d_risc_id == 2) begin
+ $display("STATUS: Working with Risc core 2");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h41F);
+ end else if(d_risc_id == 3) begin
+ $display("STATUS: Working with Risc core 3");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h81F);
+ end
repeat (100) @(posedge clock); // wait for Processor Get Ready
@@ -281,6 +287,9 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
+assign io_in[16] = 1'b0 ; // SPIS SCK
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
diff --git a/verilog/dv/user_basic/user_basic_tb.v b/verilog/dv/user_basic/user_basic_tb.v
index 5f1c60b..f6c36e5 100644
--- a/verilog/dv/user_basic/user_basic_tb.v
+++ b/verilog/dv/user_basic/user_basic_tb.v
@@ -71,16 +71,20 @@
`default_nettype wire
-`timescale 1 ns/10 ps
+`timescale 1 ns/1 ps
`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
+`include "user_params.svh"
module user_basic_tb;
parameter CLK1_PERIOD = 10;
-parameter CLK2_PERIOD = 2;
+parameter CLK2_PERIOD = 2.5;
+parameter IPLL_PERIOD = 5.008;
+parameter XTAL_PERIOD = 6;
reg clock ;
reg clock2 ;
+reg xtal_clk ;
reg wb_rst_i ;
reg power1, power2;
reg power3, power4;
@@ -104,6 +108,7 @@
wire [37:0] mprj_io ;
wire [7:0] mprj_io_0 ;
reg test_fail ;
+reg [31:0] write_data ;
reg [31:0] read_data ;
//----------------------------------
// Uart Configuration
@@ -125,6 +130,81 @@
wire clock_mon;
integer test_step;
+reg [15:0] strap_in;
+wire [31:0] strap_sticky;
+reg [7:0] test_id;
+
+assign io_in = {26'h0,xtal_clk,11'h0};
+
+wire [14:0] pstrap_select;
+
+assign pstrap_select = (strap_in[15] == 1'b1) ? PSTRAP_DEFAULT_VALUE : strap_in[14:0];
+
+
+assign strap_sticky = {
+ 2'b0 , // bit[31:30] - reserved
+ pstrap_select[12:11] , // bit[29:28] - cfg_cska_qspi_co Skew selection
+ pstrap_select[12:11] , // bit[27:26] - cfg_cska_pinmux Skew selection
+ pstrap_select[12:11] , // bit[25:24] - cfg_cska_uart Skew selection
+ pstrap_select[12:11] , // bit[23:22] - cfg_cska_qspi Skew selection
+ pstrap_select[12:11] , // bit[21:20] - cfg_cska_riscv Skew selection
+ pstrap_select[12:11] , // bit[19:18] - cfg_cska_wh Skew selection
+ pstrap_select[12:11] , // bit[17:16] - cfg_cska_wi Skew selection
+ 1'b0 , // bit[15] - Soft Reboot Request - Need to double sync to local clock
+ pstrap_select[10] , // bit[14] - Riscv SRAM clock edge selection
+ pstrap_select[9] , // bit[13] - Riscv Cache Bypass
+ pstrap_select[8] , // bit[12] - Riscv Reset control
+ pstrap_select[7:6] , // bit[11:10] - QSPI FLASH Mode Selection CS#0
+ pstrap_select[5] , // bit[9] - QSPI SRAM Mode Selection CS#2
+ pstrap_select[4] , // bit[8] - uart master config control
+ pstrap_select[3:2] , // bit[7:6] - riscv clock div
+ pstrap_select[1:0] , // bit[5:4] - riscv clock source sel
+ pstrap_select[3:2] , // bit[3:2] - wbs clock division
+ pstrap_select[1:0] // bit[1:0] - wbs clock source sel
+ };
+
+
+reg [1:0] strap_skew;
+wire [31:0] skew_config;
+
+assign skew_config[3:0] = (strap_skew == 2'b00) ? SKEW_RESET_VAL[3:0] :
+ (strap_skew == 2'b01) ? SKEW_RESET_VAL[3:0] + 2 :
+ (strap_skew == 2'b10) ? SKEW_RESET_VAL[3:0] + 4 : SKEW_RESET_VAL[3:0]-4;
+
+assign skew_config[7:4] = (strap_skew == 2'b00) ? SKEW_RESET_VAL[7:4] :
+ (strap_skew == 2'b01) ? SKEW_RESET_VAL[7:4] + 2 :
+ (strap_skew == 2'b10) ? SKEW_RESET_VAL[7:4] + 4 : SKEW_RESET_VAL[7:4]-4;
+
+assign skew_config[11:8] = (strap_skew == 2'b00) ? SKEW_RESET_VAL[11:8] :
+ (strap_skew == 2'b01) ? SKEW_RESET_VAL[11:8] + 2 :
+ (strap_skew == 2'b10) ? SKEW_RESET_VAL[11:8] + 4 : SKEW_RESET_VAL[11:8]-4;
+
+assign skew_config[15:12] = (strap_skew == 2'b00) ? SKEW_RESET_VAL[15:12] :
+ (strap_skew == 2'b01) ? SKEW_RESET_VAL[15:12] + 2 :
+ (strap_skew == 2'b10) ? SKEW_RESET_VAL[15:12] + 4 : SKEW_RESET_VAL[15:12]-4;
+
+assign skew_config[19:16] = (strap_skew == 2'b00) ? SKEW_RESET_VAL[19:16] :
+ (strap_skew == 2'b01) ? SKEW_RESET_VAL[19:16] + 2 :
+ (strap_skew == 2'b10) ? SKEW_RESET_VAL[19:16] + 4 : SKEW_RESET_VAL[19:16]-4;
+
+assign skew_config[23:20] = (strap_skew == 2'b00) ? SKEW_RESET_VAL[23:20] :
+ (strap_skew == 2'b01) ? SKEW_RESET_VAL[23:20] + 2 :
+ (strap_skew == 2'b10) ? SKEW_RESET_VAL[23:20] + 4 : SKEW_RESET_VAL[23:20]-4;
+
+assign skew_config[27:24] = (strap_skew == 2'b00) ? SKEW_RESET_VAL[27:24] :
+ (strap_skew == 2'b01) ? SKEW_RESET_VAL[27:24] + 2 :
+ (strap_skew == 2'b10) ? SKEW_RESET_VAL[27:24] + 4 : SKEW_RESET_VAL[27:24]-4;
+
+assign skew_config[31:28] = 4'b0;
+
+//----------------------------------------------------------
+reg [3:0] cpu_clk_cfg,wbs_clk_cfg;
+wire [7:0] clk_ctrl2 = {cpu_clk_cfg,wbs_clk_cfg};
+
+
+
+//-----------------------------------------------------------
+
integer i,j;
@@ -134,6 +214,7 @@
always #(CLK1_PERIOD/2) clock <= (clock === 1'b0);
always #(CLK2_PERIOD/2) clock2 <= (clock2 === 1'b0);
+ always #(XTAL_PERIOD/2) xtal_clk <= (xtal_clk === 1'b0);
initial begin
test_step = 0;
@@ -151,18 +232,20 @@
initial begin
$dumpfile("simx.vcd");
$dumpvars(1, user_basic_tb);
- //$dumpvars(1, user_basic_tb.u_top);
+ $dumpvars(1, user_basic_tb.u_top);
//$dumpvars(0, user_basic_tb.u_top.u_pll);
$dumpvars(0, user_basic_tb.u_top.u_wb_host);
+ //$dumpvars(0, user_basic_tb.u_top.u_intercon);
//$dumpvars(1, user_basic_tb.u_top.u_intercon);
- //$dumpvars(1, user_basic_tb.u_top.u_intercon);
- //$dumpvars(1, user_basic_tb.u_top.u_pinmux);
+ $dumpvars(0, user_basic_tb.u_top.u_pinmux);
end
`endif
initial begin
+ wb_rst_i <= 1'b0;
+ #1000;
wb_rst_i <= 1'b1;
- #100;
+ #1000;
wb_rst_i <= 1'b0; // Release reset
end
@@ -177,118 +260,247 @@
repeat (2) @(posedge clock);
test_fail=0;
+ // Run in Fast Sim Mode
+ `ifdef GL
+ force u_top.u_wb_host._8654_.Q= 1'b1;
+ `else
+ force u_top.u_wb_host.u_fastsim_buf.X = 1'b1;
+ `endif
+
fork
- begin
- // Default Value Check
- // cfg_wb_clk_ctrl = cfg_clk_ctrl2[7:0];
- // cfg_rtc_clk_ctrl = cfg_clk_ctrl2[15:8];
- // cfg_cpu_clk_ctrl = cfg_clk_ctrl2[23:16];
- // cfg_usb_clk_ctrl = cfg_clk_ctrl2[31:24];
-
-
- $display("Step-1, CPU: CLOCK1, USB: CLOCK2,RTC: CLOCK2 *2, WBS:CLOCK1");
- test_step = 1;
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_CLK_CTRL2,{8'h0,8'h0,8'h0,8'h0});
- clock_monitor(CLK1_PERIOD,CLK1_PERIOD,CLK2_PERIOD*2,CLK1_PERIOD);
-
- $display("Step-2, CPU: CLOCK2, USB: CLOCK2/2, RTC: CLOCK2/(2+1), WBS:CLOCK2");
- test_step = 2;
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_CLK_CTRL2,{8'h40,8'h60,8'h1,8'h40});
- clock_monitor(CLK2_PERIOD,2*CLK2_PERIOD,(3)*CLK2_PERIOD,CLK2_PERIOD);
-
- $display("Step-3, CPU: CLOCK1/2,USB: CLOCK2/(2+1), RTC: CLOCK2/(2+2), WBS:CLOCK1/2");
- test_step = 3;
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_CLK_CTRL2,{8'h20,8'h61,8'h2,8'h20});
- clock_monitor(2*CLK1_PERIOD,(3)*CLK2_PERIOD,4*CLK2_PERIOD,2*CLK1_PERIOD);
-
- $display("Step-4, CPU: CLOCK1/3, USB: CLOCK2/(2+2), RTC: CLOCK2/(2+3), WBS:CLOCK1/3");
- test_step = 4;
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_CLK_CTRL2,{8'h21,8'h62,8'h3,8'h21});
- clock_monitor(3*CLK1_PERIOD,4*CLK2_PERIOD,5*CLK2_PERIOD,3*CLK1_PERIOD);
-
- $display("Step-5, CPU: CLOCK1/4, USB: CLOCK2/(2+3), RTC: CLOCK2/(2+4), WBS:CLOCK1/4");
- test_step = 5;
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_CLK_CTRL2,{8'h22,8'h63,8'h4,8'h22});
- clock_monitor(4*CLK1_PERIOD,5*CLK2_PERIOD,6*CLK2_PERIOD,4*CLK1_PERIOD);
-
- $display("Step-6, CPU: CLOCK1/(2+3),USB: CLOCK2/(2+4), RTC: CLOCK2/(2+5), WBS:CLOCK1/(2+3)");
- test_step = 6;
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_CLK_CTRL2,{8'h23,8'h64,8'h5,8'h23});
- clock_monitor(5*CLK1_PERIOD,6*CLK2_PERIOD,7*CLK2_PERIOD,5*CLK1_PERIOD);
-
- $display("Step-7, CPU: CLOCK2/(2), USB: CLOCK2/(2+5), RTC: CLOCK2/(2+6), WBS:CLOCK2/(2)");
- test_step = 7;
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_CLK_CTRL2,{8'h60,8'h65,8'h6,8'h60});
- clock_monitor(2*CLK2_PERIOD,7*CLK2_PERIOD,8*CLK2_PERIOD,2*CLK2_PERIOD);
-
- $display("Step-8, CPU: CLOCK2/3, USB: CLOCK2/(2+6), RTC: CLOCK2/(2+7), WBS:CLOCK2/3");
- test_step = 8;
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_CLK_CTRL2,{8'h61,8'h66,8'h7,8'h61});
- clock_monitor(3*CLK2_PERIOD,8*CLK2_PERIOD,9*CLK2_PERIOD,3*CLK2_PERIOD);
-
- $display("Step-9, CPU: CLOCK2/4,USB: CLOCK2/(2+7), RTC: CLOCK2/(2+8), WBS:CLOCK2/4");
- test_step = 9;
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_CLK_CTRL2,{8'h62,8'h67,8'h8,8'h62});
- clock_monitor(4*CLK2_PERIOD,9*CLK2_PERIOD,10*CLK2_PERIOD,4*CLK2_PERIOD);
-
- $display("Step-10, CPU: CLOCK2/(2+3), USB: CLOCK2/(2+8), RTC: CLOCK2/(2+128), WBS:CLOCK1/(2+3)");
- test_step = 10;
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_CLK_CTRL2,{8'h63,8'h68,8'h80,8'h63});
- clock_monitor(5*CLK2_PERIOD,10*CLK2_PERIOD,130*CLK2_PERIOD,5*CLK2_PERIOD);
-
- $display("Step-11, CPU: CLOCK2/(2+3), USB: CLOCK2/(2+9), RTC: CLOCK2/(2+255), WBS:CLOCK2/(2+4)");
- test_step = 10;
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_CLK_CTRL2,{8'h63,8'h69,8'hFF,8'h64});
- clock_monitor(5*CLK2_PERIOD,11*CLK2_PERIOD,257*CLK2_PERIOD,6*CLK2_PERIOD);
-
- `ifndef GL
- $display("###################################################");
- $display("Monitor: Checking the PLL:");
- $display("###################################################");
- test_step = 11;
- // Set PLL enable, no DCO mode ; Set PLL output divider to 0x03
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,{16'h0,1'b1,3'b100,4'b0000,8'h2});
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_PLL_CTRL,{1'b0,5'h3,26'h00000});
- repeat (100) @(posedge clock);
- pll_clock_monitor(5);
-
- test_step = 12;
- // Set PLL enable, DCO mode ; Set PLL output divider to 0x01
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,{16'h0,1'b1,3'b000,4'b0000,8'h2});
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_PLL_CTRL,{1'b1,5'h0,26'h0000});
- repeat (100) @(posedge clock);
- pll_clock_monitor(4);
-
- $display("###################################################");
- $display("Monitor: Monitor Clock output:");
- $display("###################################################");
- $display("Monitor: CPU: CLOCK2/(2+3), USB: CLOCK2/(2+9), RTC: CLOCK2/(2+255), WBS:CLOCK2/(2+4)");
- test_step = 13;
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_CLK_CTRL2,{8'h63,8'h69,8'hFF,8'h64});
-
- // Set PLL enable, DCO mode ; Set PLL output divider to 0x01
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,{16'h0,1'b1,3'b000,4'b0000,8'h2});
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_PLL_CTRL,{1'b1,5'h0,26'h0000});
- dbg_clk_monitor(79,60,5*CLK2_PERIOD,11*CLK2_PERIOD,257*CLK2_PERIOD,6*CLK2_PERIOD);
- `endif
+ begin
+ $display("##########################################################");
+ $display("Step-1, Checking the Strap Loading");
+ test_id = 1;
+ for(i = 0; i < 16; i = i+1) begin
+ //#1 - Apply Reset
+ wb_rst_i = 1;
+ test_step = 1;
+ //#2 - Apply Strap
+ strap_in = 1 << i;
+ force u_top.io_in[36:29] = strap_in[15:8];
+ force u_top.io_in[20:13] = strap_in[7:0];
+ repeat (10) @(posedge clock);
+ test_step = 2;
- $display("###################################################");
- $display("Monitor: Checking the chip signature :");
- $display("###################################################");
- test_step = 14;
- // Remove Wb/PinMux Reset
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+ //#3 - Remove Reset
+ wb_rst_i = 0; // Remove Reset
+ test_step = 3;
- wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_0,read_data,32'h8273_8343);
- wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_1,read_data,32'h1508_2022);
- wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_2,read_data,32'h0005_0000);
+ //#4 - Wait for Power on reset removal
+ wait(u_top.p_reset_n == 1);
+ test_step = 4;
+ // #5 - Release the Strap
+ release u_top.io_in[36:29];
+ release u_top.io_in[20:13];
+ test_step = 5;
+
+ // #6 - Wait for system reset removal
+ wait(u_top.s_reset_n == 1); // Wait for system reset removal
+ repeat (10) @(posedge clock);
+ test_step = 6;
+
+ //#7 - Check the strap reg value
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_PAD_STRAP,read_data,strap_in);
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_STRAP_STICKY,read_data,strap_sticky);
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SYSTEM_STRAP,read_data,strap_sticky);
+ test_step = 7;
+ end
+
+
+ if(test_fail == 1) begin
+ $display("ERROR: Step-1, Checking the Strap Loading - FAILED");
+ end else begin
+ $display("STATUS: Step-1, Checking the Strap Loading - PASSED");
+ end
+ $display("##########################################################");
+ $display("Step-2, Checking the Clock Skew Configuration");
+ test_id = 2;
+ for(i = 0; i < 4; i = i+1) begin
+ //#1 - Apply Reset
+ wb_rst_i = 1;
+ //#2 - Apply Strap
+ strap_in = 0;
+ strap_in[12:11] = i;
+ strap_skew = i;
+ force u_top.io_in[36:29] = strap_in[15:8];
+ force u_top.io_in[20:13] = strap_in[7:0];
+ repeat (10) @(posedge clock);
+
+ //#3 - Remove Reset
+ wb_rst_i = 0; // Remove Reset
+
+ //#4 - Wait for Power on reset removal
+ wait(u_top.p_reset_n == 1);
+
+ // #5 - Release the Strap
+ release u_top.io_in[36:29];
+ release u_top.io_in[20:13];
+
+ // #6 - Wait for system reset removal
+ wait(u_top.s_reset_n == 1); // Wait for system reset removal
+ repeat (10) @(posedge clock);
+
+ //#7 - Check the strap reg value
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_PAD_STRAP,read_data,strap_in);
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_STRAP_STICKY,read_data,strap_sticky);
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SYSTEM_STRAP,read_data,strap_sticky);
+ wb_user_core_read_check(`ADDR_SPACE_WBHOST+`WBHOST_CLK_CTRL1,read_data,skew_config);
+ end
+ if(test_fail == 1) begin
+ $display("ERROR: Step-2, Checking the Clock Skew Configuration - FAILED");
+ end else begin
+ $display("STATUS: Step-2, Checking the Clock Skew Configuration - PASSED");
+ end
+ $display("##########################################################");
+ $display("Step-3, Checking the riscv/wbs clock Selection though Strap");
+ test_id = 3;
+ for(i = 0; i < 4; i = i+1) begin
+ for(j = 0; j < 4; j = j+1) begin
+ //#1 - Apply Reset
+ wb_rst_i = 1;
+ //#2 - Apply Strap
+ strap_in = 0;
+
+ strap_in[1:0] = i;
+ cpu_clk_cfg[1:0]=i;
+ wbs_clk_cfg[1:0]=i;
+
+ strap_in[3:2] = j;
+ cpu_clk_cfg[3:2]=j;
+ wbs_clk_cfg[3:2]=j;
+
+ strap_in[3:2] = j;
+ force u_top.io_in[36:29] = strap_in[15:8];
+ force u_top.io_in[20:13] = strap_in[7:0];
+ repeat (10) @(posedge clock);
+
+ //#3 - Remove Reset
+ wb_rst_i = 0; // Remove Reset
+
+ //#4 - Wait for Power on reset removal
+ wait(u_top.p_reset_n == 1);
+
+ // #5 - Release the Strap
+ release u_top.io_in[36:29];
+ release u_top.io_in[20:13];
+
+ // #6 - Wait for system reset removal
+ wait(u_top.s_reset_n == 1); // Wait for system reset removal
+ repeat (10) @(posedge clock);
+
+ //#7 - Check the strap reg value
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_PAD_STRAP,read_data,strap_in);
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_STRAP_STICKY,read_data,strap_sticky);
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SYSTEM_STRAP,read_data,strap_sticky);
+ wb_user_core_read_check(`ADDR_SPACE_WBHOST+`WBHOST_CLK_CTRL2,read_data,clk_ctrl2);
+ clock_monitor2(cpu_clk_cfg,wbs_clk_cfg);
+ end
+ end
+ if(test_fail == 1) begin
+ $display("ERROR: Step-3, Checking the riscv/wbs clock Selection though Strap - FAILED");
+ end else begin
+ $display("STATUS: Step-3, Checking the riscv/wbs clock Selection though Strap - PASSED");
+ end
+ $display("##########################################################");
+
+ $display("##########################################################");
+ $display("Step-4, Checking the soft reboot sequence");
+ test_id = 4;
+ for(i = 0; i < 31; i = i+1) begin
+ // #1 - Write Data to Sticky bit and Set Reboot Request
+ wait(u_top.s_reset_n == 1); // Wait for system reset removal
+ write_data = (1<< i) ; // bit[31] = 1 in soft reboot request
+ write_data = write_data + (1 << `STRAP_SOFT_REBOOT_REQ); // bit[STRAP_SOFT_REBOOT_REQ] = 1 in soft reboot request
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_STRAP_STICKY,write_data);
+
+
+ // #3 - Wait for system reset removal
+ wait(u_top.s_reset_n == 1); // Wait for system reset removal
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_STRAP_STICKY,read_data,{1'b0,write_data[30:0]});
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SYSTEM_STRAP,read_data,write_data);
+ repeat (10) @(posedge clock);
+
+ end
+
+ if(test_fail == 1) begin
+ $display("ERROR: Step-4, Checking the soft reboot sequence - FAILED");
+ end else begin
+ $display("STATUS: Step-4, Checking the soft reboot sequence - PASSED");
+ end
+ $display("##########################################################");
+
+ /***
+ `ifndef GL
+ $display("###################################################");
+ $display("Step-5,Monitor: Checking the PLL:");
+ $display("###################################################");
+ test_id = 5;
+ // Set PLL enable, no DCO mode ; Set PLL output divider to 0x03
+ wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,{16'h0,1'b1,3'b100,4'b0000,8'h2});
+ wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_PLL_CTRL,{1'b0,5'h3,26'h00000});
+ repeat (100) @(posedge clock);
+ pll_clock_monitor(5.101);
+
+ test_step = 12;
+ // Set PLL enable, DCO mode ; Set PLL output divider to 0x01
+ wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,{16'h0,1'b1,3'b000,4'b0000,8'h2});
+ wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_PLL_CTRL,{1'b1,5'h0,26'h0000});
+ repeat (100) @(posedge clock);
+ pll_clock_monitor(4.080);
+
+ if(test_fail == 1) begin
+ $display("ERROR: Step-5, Checking the PLL - FAILED");
+ end else begin
+ $display("STATUS: Step-5, Checking the PLL - PASSED");
+ end
+ $display("##########################################################");
+
+ $display("###################################################");
+ $display("Step-6,Monitor: PLL Monitor Clock output:");
+ $display("###################################################");
+ $display("Monitor: CPU: CLOCK2/(2+3), USB: CLOCK2/(2+9), RTC: CLOCK2/(2+255), WBS:CLOCK2/(2+4)");
+ test_id = 6;
+ test_step = 13;
+ wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_CLK_CTRL2,{8'h63,8'h69,8'hFF,8'h64});
+
+ // Set PLL enable, DCO mode ; Set PLL output divider to 0x01
+ wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,{16'h0,1'b1,3'b000,4'b0000,8'h2});
+ wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_PLL_CTRL,{1'b1,5'h0,26'h0000});
+ dbg_clk_monitor(79,60,5*CLK2_PERIOD,11*CLK2_PERIOD,257*CLK2_PERIOD,6*CLK2_PERIOD);
+ `endif
+
+ if(test_fail == 1) begin
+ $display("ERROR: Step-6, PLL Monitor Clock output - FAILED");
+ end else begin
+ $display("STATUS: Step-6, PLL Monitor Clock output - PASSED");
+ end
+ ****/
+ $display("##########################################################");
+ $display("Step-7,Monitor: Checking the chip signature :");
+ $display("###################################################");
+ test_id = 7;
+ test_step = 14;
+ // Remove Wb/PinMux Reset
+ wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_0,read_data,32'h8273_8343);
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_1,read_data,32'h2608_2022);
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_SOFT_REG_2,read_data,32'h0005_2000);
+ if(test_fail == 1) begin
+ $display("ERROR: Step-7,Monitor: Checking the chip signature - FAILED");
+ end else begin
+ $display("STATUS: Step-7,Monitor: Checking the chip signature - PASSED");
+
+ $display("##########################################################");
+
+ end
end
-
begin
- repeat (30000) @(posedge clock);
- // $display("+1000 cycles");
- test_fail = 1;
+ repeat (30000) @(posedge clock);
+ // $display("+1000 cycles");
+ test_fail = 1;
end
join_any
disable fork; //disable pending fork activity
@@ -345,7 +557,7 @@
// IOs
- .io_in ('h0) ,
+ .io_in (io_in ) ,
.io_out (io_out) ,
.io_oeb (io_oeb) ,
@@ -353,6 +565,7 @@
);
+
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
initial begin
@@ -361,6 +574,57 @@
end
`endif
+task clock_monitor2;
+input [3:0] cpu_cfg;
+input [3:0] wbs_cfg;
+real exp_cpu_period; // ns
+real exp_wbs_period; // ns
+begin
+ force clock_mon = u_top.u_wb_host.cpu_clk;
+ case(cpu_cfg)
+ 4'b0000: exp_cpu_period = CLK1_PERIOD;
+ 4'b0001: exp_cpu_period = CLK2_PERIOD;
+ 4'b0010: exp_cpu_period = IPLL_PERIOD;
+ 4'b0011: exp_cpu_period = XTAL_PERIOD;
+ 4'b0100: exp_cpu_period = CLK1_PERIOD*2;
+ 4'b0101: exp_cpu_period = CLK2_PERIOD*2;
+ 4'b0110: exp_cpu_period = IPLL_PERIOD*2;
+ 4'b0111: exp_cpu_period = XTAL_PERIOD*2;
+ 4'b1000: exp_cpu_period = CLK1_PERIOD*4;
+ 4'b1001: exp_cpu_period = CLK2_PERIOD*4;
+ 4'b1010: exp_cpu_period = IPLL_PERIOD*4;
+ 4'b1011: exp_cpu_period = XTAL_PERIOD*4;
+ 4'b1100: exp_cpu_period = CLK1_PERIOD*8;
+ 4'b1101: exp_cpu_period = CLK2_PERIOD*8;
+ 4'b1110: exp_cpu_period = IPLL_PERIOD*8;
+ 4'b1111: exp_cpu_period = XTAL_PERIOD*8;
+ endcase
+ check_clock_period("CPU CLock",exp_cpu_period);
+ release clock_mon;
+
+ force clock_mon = u_top.u_wb_host.wbs_clk_out;
+ case(wbs_cfg)
+ 4'b0000: exp_wbs_period = CLK1_PERIOD;
+ 4'b0001: exp_wbs_period = CLK2_PERIOD;
+ 4'b0010: exp_wbs_period = IPLL_PERIOD;
+ 4'b0011: exp_wbs_period = XTAL_PERIOD;
+ 4'b0100: exp_wbs_period = CLK1_PERIOD*2;
+ 4'b0101: exp_wbs_period = CLK2_PERIOD*2;
+ 4'b0110: exp_wbs_period = IPLL_PERIOD*2;
+ 4'b0111: exp_wbs_period = XTAL_PERIOD*2;
+ 4'b1000: exp_wbs_period = CLK1_PERIOD*4;
+ 4'b1001: exp_wbs_period = CLK2_PERIOD*4;
+ 4'b1010: exp_wbs_period = IPLL_PERIOD*4;
+ 4'b1011: exp_wbs_period = XTAL_PERIOD*4;
+ 4'b1100: exp_wbs_period = CLK1_PERIOD*8;
+ 4'b1101: exp_wbs_period = CLK2_PERIOD*8;
+ 4'b1110: exp_wbs_period = IPLL_PERIOD*8;
+ 4'b1111: exp_wbs_period = XTAL_PERIOD*8;
+ endcase
+ check_clock_period("WBS Clock",exp_wbs_period);
+ release clock_mon;
+end
+endtask
task clock_monitor;
input [15:0] exp_cpu_period;
@@ -372,11 +636,11 @@
check_clock_period("CPU CLock",exp_cpu_period);
release clock_mon;
- force clock_mon = u_top.u_wb_host.usb_clk;
+ force clock_mon = u_top.u_pinmux.usb_clk;
check_clock_period("USB Clock",exp_usb_period);
release clock_mon;
- force clock_mon = u_top.u_wb_host.rtc_clk;
+ force clock_mon = u_top.u_pinmux.rtc_clk;
check_clock_period("RTC Clock",exp_rtc_period);
release clock_mon;
@@ -387,7 +651,7 @@
endtask
task pll_clock_monitor;
-input [15:0] exp_period;
+input real exp_period;
begin
//force clock_mon = u_top.u_wb_host.pll_clk_out[0];
`ifdef GL
@@ -439,22 +703,32 @@
//----------------------------------
task check_clock_period;
input [127:0] clk_name;
-input [15:0] clk_period; // in NS
-time prev_t, next_t, periodd;
+input real period;
+real edge2, edge1, clock_period;
+real tolerance,min_period,max_period;
begin
- $timeformat(-12,3,"ns",10);
+
+ tolerance = 0.01;
+
+ min_period = period * (1-tolerance);
+ max_period = period * (1+tolerance);
+
+ //$timeformat(-12,2,"ps",10);
repeat(1) @(posedge clock_mon);
repeat(1) @(posedge clock_mon);
- prev_t = $realtime;
+ edge1 = $realtime;
repeat(100) @(posedge clock_mon);
- next_t = $realtime;
- periodd = (next_t-prev_t)/100;
- //periodd = (periodd)/1e9;
- if(clk_period != periodd) begin
- $display("STATUS: FAIL => %s Exp Period: %d Rxd: %d",clk_name,clk_period,periodd);
+ edge2 = $realtime;
+ clock_period = (edge2-edge1)/100;
+
+ if ( clock_period > max_period ) begin
+ $display("STATUS: FAIL => %s clock is too fast => Exp: %.3fns Rxd: %.3fns",clk_name,clock_period,max_period);
+ test_fail = 1;
+ end else if ( clock_period < min_period ) begin
+ $display("STATUS: FAIL => %s clock is too slow => Exp: %.3fns Rxd: %.3fns",clk_name,clock_period,min_period);
test_fail = 1;
end else begin
- $display("STATUS: PASS => %s Period: %d ",clk_name,clk_period);
+ $display("STATUS: PASS => %s Period: %.3fns ",clk_name,period);
end
end
endtask
diff --git a/verilog/dv/user_cache_bypass/user_cache_bypass_tb.v b/verilog/dv/user_cache_bypass/user_cache_bypass_tb.v
index 45a24d3..28c8f2c 100644
--- a/verilog/dv/user_cache_bypass/user_cache_bypass_tb.v
+++ b/verilog/dv/user_cache_bypass/user_cache_bypass_tb.v
@@ -234,6 +234,9 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
+assign io_in[16] = 1'b0 ; // SPIS SCK
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
diff --git a/verilog/dv/user_gpio/Makefile b/verilog/dv/user_gpio/Makefile
index c5090ee..28bcc52 100644
--- a/verilog/dv/user_gpio/Makefile
+++ b/verilog/dv/user_gpio/Makefile
@@ -78,7 +78,7 @@
endif
%.vcd: %.vvp
- vvp $<
+ vvp $< +risc_core_id=$(RISC_CORE)
# ---- Clean ----
diff --git a/verilog/dv/user_gpio/user_gpio_tb.v b/verilog/dv/user_gpio/user_gpio_tb.v
index 0451459..a0ab607 100644
--- a/verilog/dv/user_gpio/user_gpio_tb.v
+++ b/verilog/dv/user_gpio/user_gpio_tb.v
@@ -103,9 +103,11 @@
wire [7:0] mprj_io_0;
reg test_fail;
reg [31:0] read_data;
- integer test_step;
- wire clock_mon;
+ reg test_start;
+ integer test_step;
+ wire clock_mon;
+ integer d_risc_id;
// External clock is used by default. Make this artificially fast for the
// simulation. Normally this would be a slow clock and the digital PLL
@@ -115,109 +117,129 @@
/************* Port-A Mapping **********************************
+ * PA0 digital_io[0]
+ * PA1 digital_io[1]
+ * PA2 digital_io[2]
+ * PA3 digital_io[3]
+ * PA4 digital_io[4]
* ********************************************************/
reg [7:0] port_a_out;
- wire [7:0] port_a_in = 8'h0;
+ wire [7:0] port_a_in = { 3'b0,
+ io_out[4],
+ io_out[3],
+ io_out[2],
+ io_out[1],
+ io_out[0]
+ };
+
+
+ assign { io_in[4],
+ io_in[3],
+ io_in[2],
+ io_in[1],
+ io_in[0]
+ } = (test_start) ? port_a_out[4:0]: 5'hZ;
+
/************* Port-B Mapping **********************************
- * Pin-14 PB0/CLKO/ICP1 digital_io[11]
- * Pin-15 PB1/SS[1]OC1A(PWM3) digital_io[12]
- * Pin-16 PB2/SS[0]/OC1B(PWM4) digital_io[13]
- * Pin-17 PB3/MOSI/OC2A(PWM5) digital_io[14]
- * Pin-18 PB4/MISO digital_io[15]
- * Pin-19 PB5/SCK digital_io[16]
- * Pin-9 PB6/XTAL1/TOSC1 digital_io[6]
- * Pin-10 PB7/XTAL2/TOSC2 digital_io[7]
+ * Pin-14 8 PB0/WS[2]/CLKO/ICP1 strap[3] digital_io[16]
+ * Pin-15 9 PB1/WS[3]/SS[1]OC1A(PWM3) strap[4] digital_io[17]
+ * Pin-16 10 PB2/WS[3]/SS[0]/OC1B(PWM4) strap[5] digital_io[18]
+ * Pin-17 11 PB3/WS[3]/MOSI/OC2A(PWM5) strap[6] digital_io[19]
+ * Pin-18 12 PB4/WS[3]/MISO strap[7] digital_io[20]
+ * Pin-19 13 PB5/SCK digital_io[21]
+ * Pin-9 20 PB6/WS[1]/XTAL1/TOSC1 digital_io[11]
+ * Pin-10 21 PB7/WS[1]/XTAL2/TOSC2 digital_io[12]
* ********************************************************/
reg [7:0] port_b_out;
- wire [7:0] port_b_in = { io_out[7],
- io_out[6],
- io_out[16],
- io_out[15],
- io_out[14],
- io_out[13],
- io_out[12],
- io_out[11]
+ wire [7:0] port_b_in = { io_out[12],
+ io_out[11],
+ io_out[21],
+ io_out[20],
+ io_out[19],
+ io_out[18],
+ io_out[17],
+ io_out[16]
};
- assign { io_in[7],
- io_in[6],
- io_in[16],
- io_in[15],
- io_in[14],
- io_in[13],
- io_in[12],
- io_in[11]
- } = port_b_out;
+ assign { io_in[12],
+ io_in[11],
+ io_in[21],
+ io_in[20],
+ io_in[19],
+ io_in[18],
+ io_in[17],
+ io_in[16]
+ } = (test_start) ? port_b_out: 8'hZ;
/************* Port-C Mapping **********************************
- * Pin-1 PC6/RESET* digital_io[0]
- * Pin-23 PC0/ADC0 digital_io[18]/analog_io[11]
- * Pin-24 PC1/ADC1 digital_io[19]/analog_io[12]
- * Pin-25 PC2/ADC2 digital_io[20]/analog_io[13]
- * Pin-26 PC3/ADC3 digital_io[21]/analog_io[14]
- * Pin-27 PC4/ADC4/SDA digital_io[22]/analog_io[15]
- * Pin-28 PC5/ADC5/SCL digital_io[23]/analog_io[16]
+ * Pin-23 14 PC0/uartm_rxd/ADC0 digital_io[22]/analog_io[11]
+ * Pin-24 15 PC1/uartm_txd/ADC1 digital_io[23]/analog_io[12]
+ * Pin-25 16 PC2/usb_dp/ADC2 digital_io[24]/analog_io[13]
+ * Pin-26 17 PC3/usb_dn/ADC3 digital_io[25]/analog_io[14]
+ * Pin-27 18 PC4/ADC4/SDA digital_io[26]/analog_io[15]
+ * Pin-28 19 PC5/ADC5/SCL digital_io[27]/analog_io[16]
+ * Pin-1 22 PC6/WS[0]/RESET* digital_io[5]
* ********************************************************/
reg [7:0] port_c_out;
wire [7:0] port_c_in = { 1'b0,
- io_out[0],
+ io_out[5],
+ io_out[27],
+ io_out[26],
+ io_out[25],
+ io_out[24],
io_out[23],
- io_out[22],
- io_out[21],
- io_out[20],
- io_out[19],
- io_out[18]
+ io_out[22]
};
- assign { io_in[0],
- io_in[23],
- io_in[22],
- io_in[21],
- io_in[20],
- io_in[19],
- io_in[18]
- } = port_c_out[6:0];
+ assign { io_in[5],
+ io_in[27],
+ io_in[26],
+ io_in[25],
+ io_in[24],
+ io_in[23],
+ io_in[22]
+ } = (test_start) ? port_c_out[6:0] : 7'hZ;
/************* Port-D Mapping **********************************
- * Pin-2 PD0/RXD[0] digital_io[1]
- * Pin-3 PD1/TXD[0] digital_io[2]
- * Pin-4 PD2/RXD[1]/INT0 digital_io[3]
- * Pin-5 PD3/INT1/OC2B(PWM0) digital_io[4]
- * Pin-6 PD4/TXD[1] digital_io[5]
- * Pin-11 PD5/SS[3]/OC0B(PWM1)/T1 digital_io[8]
- * Pin-12 PD6/SS[2]/OC0A(PWM2)/AIN0 digital_io[9]/analog_io[2]
- * Pin-13 PD7/A1N1 digital_io[10]/analog_io[3]
+ * Pin-2 0 PD0/WS[0]/RXD[0] digital_io[6]
+ * Pin-3 1 PD1/WS[0]/TXD[0] digital_io[7]
+ * Pin-4 2 PD2/WS[0]/RXD[1]/INT0 digital_io[8]
+ * Pin-5 3 PD3/WS[1]INT1/OC2B(PWM0) digital_io[9]
+ * Pin-6 4 PD4/WS[1]TXD[1] digital_io[10]
+ * Pin-11 5 PD5/WS[2]/SS[3]/OC0B(PWM1)/T1 strap[0] digital_io[13]
+ * Pin-12 6 PD6/WS[2]/SS[2]/OC0A(PWM2)/AIN0 strap[1] digital_io[14]/analog_io[2]
+ * Pin-13 7 PD7/WS[2]/A1N1 strap[2] digital_io[15]/analog_io[3]
* ********************************************************/
reg [7:0] port_d_out;
- wire [7:0] port_d_in = { io_out[10],
- io_out[9],
- io_out[8],
- io_out[5],
- io_out[4],
- io_out[3],
- io_out[2],
- io_out[1]
+ wire [7:0] port_d_in = { io_out[15],
+ io_out[14],
+ io_out[13],
+ io_out[10],
+ io_out[9],
+ io_out[8],
+ io_out[7],
+ io_out[6]
};
- assign { io_in[10],
- io_in[9],
- io_in[8],
- io_in[5],
- io_in[4],
- io_in[3],
- io_in[2],
- io_in[1]
- } = port_d_out;
+ assign { io_in[15],
+ io_in[14],
+ io_in[13],
+ io_in[10],
+ io_in[9],
+ io_in[8],
+ io_in[7],
+ io_in[6]
+ } = (test_start) ? port_d_out : 8'hz;
/*****************************/
- wire [15:0] irq_lines = u_top.u_pinmux.u_glbl_reg.irq_lines;
+ wire [31:0] irq_lines = u_top.u_pinmux.u_glbl_reg.irq_lines;
initial begin
clock = 0;
@@ -240,27 +262,32 @@
`endif
initial begin
+ test_start = 0;
test_fail = 0;
+ $value$plusargs("risc_core_id=%d", d_risc_id);
+
+ init();
+ test_start = 1;
#200; // Wait for reset removal
repeat (10) @(posedge clock);
$display("Monitor: Standalone User Risc Boot Test Started");
- repeat (2) @(posedge clock);
+ repeat (2) @(posedge clock);
#1;
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+ //wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
- // Disable Multi func
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_MUTI_FUNC,'h000);
+ // Disable Multi func
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_MUTI_FUNC,'h000);
/************* GPIO As Output ******************/
$display("#####################################");
$display("Step-1: Testing GPIO As Output ");
// Set the Direction as Output
- wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_DSEL,'hFFFFFFFF);
+ wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_DSEL,'hFFFFFFFF);
// Set the GPIO Output data: 0x55555555
- wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_ODATA,'h55555555);
+ wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_ODATA,'h55555555);
cmp_gpio_output(8'h55,8'h55,8'h55,8'h55);
// Set the GPIO Output data: 0xAAAAAAAA
@@ -279,7 +306,7 @@
$display("#####################################");
$display("Step-2: Testing GPIO As Input ");
// Set the Direction as Input
- wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_DSEL,'h00000000);
+ wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_DSEL,'h00000000);
cmp_gpio_input(8'h55,8'h55,8'h55,8'h55);
cmp_gpio_input(8'hAA,8'hAA,8'hAA,8'hAA);
@@ -290,12 +317,12 @@
$display("#####################################");
$display("Step-3: Testing GPIO As Posedge Interrupt ");
// Set the Direction as Input
- wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_DSEL,'h00000000);
+ wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_DSEL,'h00000000);
// Set GPIO for posedge Interrupt
- wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_INTR_MASK,'hFFFFFFFF);
- wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_POS_INTR_SEL,'hFFFFFFFF);
- wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_NEG_INTR_SEL,'h00000000);
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_MSK,'hFFFF);
+ wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_INTR_MASK,'hFFFFFFFF);
+ wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_POS_INTR_SEL,'hFFFFFFFF);
+ wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_NEG_INTR_SEL,'h00000000);
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_MSK,'hFFFFFF00);
// Drive GPIO with 0x55
cmp_gpio_pos_intr(8'h55,8'h55,8'h55,8'h55);
@@ -356,11 +383,6 @@
$finish;
end
- initial begin
- wb_rst_i = 1'b1;
- #100;
- wb_rst_i = 1'b0; // Release reset
- end
wire USER_VDD1V8 = 1'b1;
wire VSS = 1'b0;
@@ -407,32 +429,6 @@
end
`endif
-//------------------------------------------------------
-// Integrate the Serial flash with qurd support to
-// user core using the gpio pads
-// ----------------------------------------------------
- wire flash_io1;
- wire flash_clk = io_out[16];
- wire spiram_csb = io_out[13];
- tri #1 flash_io0 = io_out[15];
- assign io_in[14] = flash_io1;
-
- tri #1 flash_io2 = 1'b1;
- tri #1 flash_io3 = 1'b1;
-
-
- is62wvs1288 #(.mem_file_name("flash1.hex"))
- u_sfram (
- // Data Inputs/Outputs
- .io0 (flash_io0),
- .io1 (flash_io1),
- // Controls
- .clk (flash_clk),
- .csb (spiram_csb),
- .io2 (flash_io2),
- .io3 (flash_io3)
- );
-
//----------------------------------------------------
// Task
@@ -457,12 +453,12 @@
// Wait for some cycle to reg to be written through wbbone host
repeat (20) @(posedge clock);
- if((exp_port_a & 8'h00) != (port_a_in & 8'h00))
+ if((exp_port_a & 8'h1F) != (port_a_in & 8'h1F))
begin
- $display("ERROR: PORT A Exp: %x Rxd: %x",exp_port_a & 8'h00,port_a_in & 8'h00);
+ $display("ERROR: PORT A Exp: %x Rxd: %x",exp_port_a & 8'h1F,port_a_in & 8'h1F);
`TB_GLBL.test_fail = 1;
end else begin
- $display("STATYS: PORT A Data: %x Matched ",port_a_in & 8'h00);
+ $display("STATYS: PORT A Data: %x Matched ",port_a_in & 8'h1F);
end
if((exp_port_b & 8'hFF) != (port_b_in & 8'hFF))
@@ -506,7 +502,7 @@
port_c_out = port_c;
port_d_out = port_d;
- wb_user_core_read_check(`ADDR_SPACE_GPIO+`GPIO_CFG_IDATA,read_data,{port_d,port_c & 8'h7F,port_b,8'h0});
+ wb_user_core_read_check(`ADDR_SPACE_GPIO+`GPIO_CFG_IDATA,read_data,{port_d,port_c & 8'h7F,port_b,port_a & 8'h1F});
end
endtask
@@ -522,13 +518,12 @@
// Drive GPIO with zero
cmp_gpio_input(8'h00,8'h00,8'h00,8'h00);
- // Clear Global Interrupt
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_STAT,'h00008000);
-
// Clear all the Interrupt
wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_INTR_CLR,'hFFFFFFFF);
-
wb_user_core_read_check(`ADDR_SPACE_GPIO+`GPIO_CFG_INTR_STAT,read_data,32'h0);
+ // Clear Global Interrupt
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_STAT,'hFFFFFFFF);
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GPIO_CFG_INTR_STAT,read_data,32'h0);
// Drive Ports
cmp_gpio_input(port_d,port_c,port_b,port_a);
@@ -544,12 +539,12 @@
repeat (20) @(posedge clock);
// Check the GPIO Interrupt
- wb_user_core_read_check(`ADDR_SPACE_GPIO+`GPIO_CFG_INTR_STAT,read_data,{port_d,port_c & 8'h7F,port_b,8'h0});
+ wb_user_core_read_check(`ADDR_SPACE_GPIO+`GPIO_CFG_INTR_STAT,read_data,{port_d,port_c & 8'h7F,port_b,port_a & 8'h1F});
// Check The Global Interrupt
- wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_STAT,read_data,32'h8000);
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_STAT,read_data,{port_d,port_c & 8'h7F,port_b,8'h0});
- if(irq_lines[15] != 1'b1) begin
+ if(irq_lines[31:8] == 0) begin
$display("ERROR: Global GPIO Interrupt not detected");
`TB_GLBL.test_fail = 1;
end
@@ -557,8 +552,8 @@
// Clear The GPIO Interrupt
wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_INTR_CLR,32'hFFFFFFFF);
- // Clear GPIO Interrupt
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_STAT,'h8000);
+ // Clear GLBL Interrupt
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_STAT,'hFFFFFFFF);
// Check Interrupt are cleared
@@ -583,12 +578,12 @@
// Drive GPIO with All One's
cmp_gpio_input(8'hFF,8'hFF,8'hFF,8'hFF);
- // Clear Global Interrupt
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_STAT,'h00008000);
-
- // Clear all the Interrupt
wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_INTR_CLR,'hFFFFFFFF);
wb_user_core_read_check(`ADDR_SPACE_GPIO+`GPIO_CFG_INTR_STAT,read_data,32'h0);
+ // Clear Global Interrupt
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_STAT,'hFFFFFFFF);
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_STAT,read_data,32'h0);
+
// Drive Ports
cmp_gpio_input(port_d,port_c,port_b,port_a);
@@ -603,12 +598,12 @@
repeat (20) @(posedge clock);
// Neg edge interrupt is will compliment of input value
- wb_user_core_read_check(`ADDR_SPACE_GPIO+`GPIO_CFG_INTR_STAT,read_data,{port_d ^ 8'hFF,(port_c ^ 8'hFF) & 8'h7F,port_b ^ 8'hFF,8'h0});
+ wb_user_core_read_check(`ADDR_SPACE_GPIO+`GPIO_CFG_INTR_STAT,read_data,{port_d ^ 8'hFF,(port_c ^ 8'hFF) & 8'h7F,port_b ^ 8'hFF,(port_a ^ 8'hFF )& 8'h1F});
// Check The Global Interrupt
- wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_STAT,read_data,32'h8000);
+ wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_STAT,read_data,{port_d ^ 8'hFF,(port_c ^ 8'hFF) & 8'h7F,port_b ^ 8'hFF,8'h0});
- if(irq_lines[15] != 1'b1) begin
+ if(irq_lines[31:8] == 0) begin
$display("ERROR: Global GPIO Interrupt not detected");
`TB_GLBL.test_fail = 1;
end
@@ -617,7 +612,7 @@
wb_user_core_write(`ADDR_SPACE_GPIO+`GPIO_CFG_INTR_CLR,32'hFFFFFFFF);
// Clear GPIO Interrupt
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_STAT,'h8000);
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_STAT,'hFFFFFFFF);
// Check Interrupt are cleared
wb_user_core_read_check(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_STAT,read_data,32'h0);
@@ -761,5 +756,6 @@
`endif
**/
+`include "user_tasks.sv"
endmodule
`default_nettype wire
diff --git a/verilog/dv/user_i2cm/user_i2cm_tb.v b/verilog/dv/user_i2cm/user_i2cm_tb.v
index 87b94a3..a343366 100644
--- a/verilog/dv/user_i2cm/user_i2cm_tb.v
+++ b/verilog/dv/user_i2cm/user_i2cm_tb.v
@@ -124,15 +124,11 @@
end
`endif
- initial begin
- wb_rst_i <= 1'b1;
- #100;
- wb_rst_i <= 1'b0; // Release reset
- end
initial
begin
test_fail = 0;
-
+ init();
+
#200; // Wait for reset removal
repeat (10) @(posedge clock);
$display("############################################");
@@ -337,6 +333,8 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
@@ -350,10 +348,10 @@
// --------------------------
tri scl,sda;
-assign sda = (io_oeb[22] == 1'b0) ? io_out[22] : 1'bz;
-assign scl = (io_oeb[23] == 1'b0) ? io_out[23]: 1'bz;
-assign io_in[22] = sda;
-assign io_in[23] = scl;
+assign sda = (io_oeb[26] == 1'b0) ? io_out[26] : 1'bz;
+assign scl = (io_oeb[27] == 1'b0) ? io_out[27]: 1'bz;
+assign io_in[26] = sda;
+assign io_in[27] = scl;
pullup p1(scl); // pullup scl line
pullup p2(sda); // pullup sda line
@@ -386,7 +384,7 @@
wbd_ext_we_i ='h0; // write
wbd_ext_dat_i ='h0; // data output
wbd_ext_sel_i ='h0; // byte enable
- $display("DEBUG WB USER ACCESS WRITE Address : %x, Data : %x",address,data);
+ $display("STATUS: WB USER ACCESS WRITE Address : 0x%x, Data : 0x%x",address,data);
repeat (2) @(posedge clock);
end
endtask
@@ -415,7 +413,7 @@
wbd_ext_we_i ='h0; // write
wbd_ext_dat_i ='h0; // data output
wbd_ext_sel_i ='h0; // byte enable
- //$display("DEBUG WB USER ACCESS READ Address : %x, Data : %x",address,data);
+ //$display("STATUS: WB USER ACCESS READ Address : 0x%x, Data : 0x%x",address,data);
repeat (2) @(posedge clock);
end
endtask
@@ -493,5 +491,6 @@
`endif
**/
+`include "user_tasks.sv"
endmodule
`default_nettype wire
diff --git a/verilog/dv/user_mcore_test1/user_mcore_test1_tb.v b/verilog/dv/user_mcore_test1/user_mcore_test1_tb.v
index a4bda85..1d75851 100644
--- a/verilog/dv/user_mcore_test1/user_mcore_test1_tb.v
+++ b/verilog/dv/user_mcore_test1/user_mcore_test1_tb.v
@@ -230,6 +230,9 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
+assign io_in[16] = 1'b0 ; // SPIS SCK
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
diff --git a/verilog/dv/user_mcore_test2/user_mcore_test2_tb.v b/verilog/dv/user_mcore_test2/user_mcore_test2_tb.v
index 7ee2ba2..18f5cf0 100644
--- a/verilog/dv/user_mcore_test2/user_mcore_test2_tb.v
+++ b/verilog/dv/user_mcore_test2/user_mcore_test2_tb.v
@@ -314,6 +314,9 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
+assign io_in[16] = 1'b0 ; // SPIS SCK
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
diff --git a/verilog/dv/user_pwm/user_pwm_tb.v b/verilog/dv/user_pwm/user_pwm_tb.v
index c6f24b7..32b5b69 100644
--- a/verilog/dv/user_pwm/user_pwm_tb.v
+++ b/verilog/dv/user_pwm/user_pwm_tb.v
@@ -135,40 +135,41 @@
initial begin
$dumpon;
+ init();
#200; // Wait for reset removal
repeat (10) @(posedge clock);
$display("Monitor: Standalone User Risc Boot Test Started");
// Remove Wb Reset
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+ //wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
- // Enable PWM Multi Functional Ports
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_MUTI_FUNC,'h03F);
+ // Enable PWM Multi Functional Ports
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_MUTI_FUNC,'h03F);
- repeat (2) @(posedge clock);
+ repeat (2) @(posedge clock);
#1;
- // Remove the reset
+ // Remove the reset
// Remove WB and SPI/UART Reset, Keep CORE under Reset
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h01F);
+ //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h01F);
// config 1us based on system clock - 1000/25ns = 40
- wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_GLBL,39);
+ wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_GLBL,39);
test_fail = 0;
- repeat (200) @(posedge clock);
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h1000); // Change the Bank Sel 1000
+ repeat (200) @(posedge clock);
+ wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h1000); // Change the Bank Sel 1000
- $display("Step-1, PWM-0: 1ms/2 = 500Hz; PWM-1: 1ms/3; PWM-2: 1ms/4, PWM-3: 1ms/5, PWM-4: 1ms/6, PWM-5: 1ms/7");
- test_step = 1;
- wb_user_core_write(`ADDR_SPACE_PWM+`PWM_CFG_PWM_0,'h0000_0000);
- wb_user_core_write(`ADDR_SPACE_PWM+`PWM_CFG_PWM_1,'h0000_0001);
- wb_user_core_write(`ADDR_SPACE_PWM+`PWM_CFG_PWM_2,'h0001_0001);
- wb_user_core_write(`ADDR_SPACE_PWM+`PWM_CFG_PWM_3,'h0001_0002);
- wb_user_core_write(`ADDR_SPACE_PWM+`PWM_CFG_PWM_4,'h0002_0002);
- wb_user_core_write(`ADDR_SPACE_PWM+`PWM_CFG_PWM_5,'h0002_0003);
- pwm_monitor(OneMsPeriod*2,OneMsPeriod*3,OneMsPeriod*4,OneMsPeriod*5,OneMsPeriod*6,OneMsPeriod*7);
+ $display("Step-1, PWM-0: 1ms/2 = 500Hz; PWM-1: 1ms/3; PWM-2: 1ms/4, PWM-3: 1ms/5, PWM-4: 1ms/6, PWM-5: 1ms/7");
+ test_step = 1;
+ wb_user_core_write(`ADDR_SPACE_PWM+`PWM_CFG_PWM_0,'h0000_0000);
+ wb_user_core_write(`ADDR_SPACE_PWM+`PWM_CFG_PWM_1,'h0000_0001);
+ wb_user_core_write(`ADDR_SPACE_PWM+`PWM_CFG_PWM_2,'h0001_0001);
+ wb_user_core_write(`ADDR_SPACE_PWM+`PWM_CFG_PWM_3,'h0001_0002);
+ wb_user_core_write(`ADDR_SPACE_PWM+`PWM_CFG_PWM_4,'h0002_0002);
+ wb_user_core_write(`ADDR_SPACE_PWM+`PWM_CFG_PWM_5,'h0002_0003);
+ pwm_monitor(OneMsPeriod*2,OneMsPeriod*3,OneMsPeriod*4,OneMsPeriod*5,OneMsPeriod*6,OneMsPeriod*7);
repeat (100) @(posedge clock);
// $display("+1000 cycles");
@@ -190,20 +191,15 @@
$finish;
end
- initial begin
- wb_rst_i <= 1'b1;
- #100;
- wb_rst_i <= 1'b0; // Release reset
- end
wire USER_VDD1V8 = 1'b1;
wire VSS = 1'b0;
-wire pwm0 = io_out[4];
-wire pwm1 = io_out[8];
-wire pwm2 = io_out[9];
-wire pwm3 = io_out[12];
-wire pwm4 = io_out[13];
-wire pwm5 = io_out[14];
+wire pwm0 = io_out[9];
+wire pwm1 = io_out[13];
+wire pwm2 = io_out[14];
+wire pwm3 = io_out[17];
+wire pwm4 = io_out[18];
+wire pwm5 = io_out[19];
task pwm_monitor;
@@ -300,6 +296,8 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
@@ -450,5 +448,6 @@
`endif
**/
+`include "user_tasks.sv"
endmodule
`default_nettype wire
diff --git a/verilog/dv/user_qspi/user_qspi_tb.v b/verilog/dv/user_qspi/user_qspi_tb.v
index 8f984e1..e4785b1 100644
--- a/verilog/dv/user_qspi/user_qspi_tb.v
+++ b/verilog/dv/user_qspi/user_qspi_tb.v
@@ -192,9 +192,10 @@
initial begin
$dumpon;
+ init();
#200; // Wait for reset removal
- repeat (10) @(posedge clock);
+ repeat (10) @(posedge clock);
$display("Monitor: Standalone User Risc Boot Test Started");
// Remove Wb Reset
@@ -202,15 +203,23 @@
repeat (2) @(posedge clock);
#1;
- // Remove only WB and SPI Reset
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h2);
+ // Enable SPI Reset
+ wb_user_core_read(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,read_data);
+ read_data = read_data | 8'h02;
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,read_data);
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h0000); // Change the Bank Sel 0000
+ wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h0000); // Change the Bank Sel 0000
test_fail = 0;
- repeat (200) @(posedge clock);
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h1000); // Change the Bank Sel 1000
+ repeat (200) @(posedge clock);
+ wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h1000); // Change the Bank Sel 1000
+
+ if(u_top.strap_qspi_sram) begin // if the SRAM STRAP in QUAD Mode, then send reset command to switch to SINGLE PHASE
+ wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_CTRL1,{16'h0,1'b0,1'b0,4'b0000,P_MODE_SWITCH_IDLE,P_QUAD,P_QUAD,4'b0100});
+ wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_CTRL2,{8'h0,2'b00,2'b00,P_FSM_C,8'h00,8'hFF});
+ wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_WDATA,32'h0);
+ end
// CS#2 SSPI Indirect RAM READ ACCESS-
wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_CTRL1,{16'h0,1'b0,1'b0,4'b0000,P_MODE_SWITCH_IDLE,P_SINGLE,P_SINGLE,4'b0100});
wb_user_core_write(`ADDR_SPACE_QSPI+`QSPIM_IMEM_CTRL2,{8'h4,2'b00,2'b10,P_FSM_CADR,8'h00,8'h03});
@@ -1152,11 +1161,6 @@
$finish;
end
- initial begin
- wb_rst_i <= 1'b1;
- #100;
- wb_rst_i <= 1'b0; // Release reset
- end
wire USER_VDD1V8 = 1'b1;
wire VSS = 1'b0;
@@ -1195,6 +1199,9 @@
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
+
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
initial begin
@@ -1207,22 +1214,22 @@
// user core using the gpio pads
// ----------------------------------------------------
- wire flash_clk = io_out[24];
- wire flash_csb = io_out[25];
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
// Creating Pad Delay
- wire #1 io_oeb_29 = io_oeb[29];
- wire #1 io_oeb_30 = io_oeb[30];
- wire #1 io_oeb_31 = io_oeb[31];
- wire #1 io_oeb_32 = io_oeb[32];
- tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
- tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
- tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
- tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
- assign io_in[29] = flash_io0;
- assign io_in[30] = flash_io1;
- assign io_in[31] = flash_io2;
- assign io_in[32] = flash_io3;
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
// Quad flash
@@ -1242,7 +1249,7 @@
);
- wire spiram_csb = io_out[27];
+ wire spiram_csb = io_out[31];
is62wvs1288 #(.mem_file_name("flash1.hex"))
u_sfram (
@@ -1387,6 +1394,7 @@
`endif
**/
+`include "user_tasks.sv"
endmodule
`include "s25fl256s.sv"
`default_nettype wire
diff --git a/verilog/dv/user_risc_boot/Makefile b/verilog/dv/user_risc_boot/Makefile
index 0417a18..d83adcc 100644
--- a/verilog/dv/user_risc_boot/Makefile
+++ b/verilog/dv/user_risc_boot/Makefile
@@ -51,32 +51,32 @@
vvp: ${PATTERN:=.vvp}
%.vvp: %_tb.v
- ${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\" -c -I./ -I$(YIFIVE_FIRMWARE_PATH) user_risc_boot.c -o user_risc_boot.o
+ ${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\" -c -I./ -I$(YIFIVE_FIRMWARE_PATH) ${PATTERN}.c -o ${PATTERN}.o
${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\" -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH) $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
- ${GCC_PREFIX}-gcc -o user_risc_boot.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_risc_boot.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
- ${GCC_PREFIX}-objcopy -O verilog user_risc_boot.elf user_risc_boot.hex
- ${GCC_PREFIX}-objdump -D user_risc_boot.elf > user_risc_boot.dump
- rm crt.o user_risc_boot.o
+ ${GCC_PREFIX}-gcc -o ${PATTERN}.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld ${PATTERN}.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
+ ${GCC_PREFIX}-objcopy -O verilog ${PATTERN}.elf ${PATTERN}.hex
+ ${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
+ rm crt.o ${PATTERN}.o
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
- iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
$< -o $@
else
- iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DRISC_BOOT -DSIM -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
$< -o $@
endif
else
ifeq ($(DUMP),OFF)
- iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
else
- iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
diff --git a/verilog/dv/user_risc_boot/user_risc_boot.c b/verilog/dv/user_risc_boot/user_risc_boot.c
index c14c9a7..923dba7 100644
--- a/verilog/dv/user_risc_boot/user_risc_boot.c
+++ b/verilog/dv/user_risc_boot/user_risc_boot.c
@@ -16,37 +16,29 @@
// SPDX-FileContributor: Dinesh Annayya <dinesha@opencores.org>
// //////////////////////////////////////////////////////////////////////////
#define SC_SIM_OUTPORT (0xf0000000)
-#define uint32_t long
+#include "../c_func/inc/int_reg_map.h"
+#include "common_misc.h"
+#include "common_bthread.h"
-#define reg_mprj_globl_reg0 (*(volatile uint32_t*)0x10020000) // Chip ID
-#define reg_mprj_globl_reg1 (*(volatile uint32_t*)0x10020004) // Global Config-0
-#define reg_mprj_globl_reg2 (*(volatile uint32_t*)0x10020008) // Global Config-1
-#define reg_mprj_globl_reg3 (*(volatile uint32_t*)0x1002000C) // Global Interrupt Mask
-#define reg_mprj_globl_reg4 (*(volatile uint32_t*)0x10020010) // Global Interrupt
-#define reg_mprj_globl_reg5 (*(volatile uint32_t*)0x10020014) // Multi functional sel
-#define reg_mprj_globl_soft0 (*(volatile uint32_t*)0x10020018) // Sof Register-0
-#define reg_mprj_globl_soft1 (*(volatile uint32_t*)0x1002001C) // Sof Register-1
-#define reg_mprj_globl_soft2 (*(volatile uint32_t*)0x10020020) // Sof Register-2
-#define reg_mprj_globl_soft3 (*(volatile uint32_t*)0x10020024) // Sof Register-3
-#define reg_mprj_globl_soft4 (*(volatile uint32_t*)0x10020028) // Sof Register-4
-#define reg_mprj_globl_soft5 (*(volatile uint32_t*)0x1002002C) // Sof Register-5
int main()
{
- //volatile long *out_ptr = (volatile long*)SC_SIM_OUTPORT;
- //*out_ptr = 0xAABBCCDD;
- //*out_ptr = 0xBBCCDDEE;
- //*out_ptr = 0xCCDDEEFF;
- //*out_ptr = 0xDDEEFF00;
+ // GLBL_CFG_MAIL_BOX used as mail box, each core update boot up handshake at 8 bit
+ // bit[7:0] - core-0
+ // bit[15:8] - core-1
+ // bit[23:16] - core-2
+ // bit[31:24] - core-3
+
+ reg_glbl_mail_box = 0x1 << (bthread_get_core_id() * 8); // Start of Main
// Write software Write & Read Register
- reg_mprj_globl_soft0 = 0x11223344;
- reg_mprj_globl_soft1 = 0x22334455;
- reg_mprj_globl_soft2 = 0x33445566;
- reg_mprj_globl_soft3 = 0x44556677;
- reg_mprj_globl_soft4 = 0x55667788;
- reg_mprj_globl_soft5 = 0x66778899;
+ reg_glbl_soft_reg_0 = 0x11223344;
+ reg_glbl_soft_reg_1 = 0x22334455;
+ reg_glbl_soft_reg_2 = 0x33445566;
+ reg_glbl_soft_reg_3 = 0x44556677;
+ reg_glbl_soft_reg_4 = 0x55667788;
+ reg_glbl_soft_reg_5 = 0x66778899;
//reg_mprj_globl_reg12 = 0x778899AA;
//reg_mprj_globl_reg13 = 0x8899AABB;
//reg_mprj_globl_reg14 = 0x99AABBCC;
diff --git a/verilog/dv/user_risc_boot/user_risc_boot_tb.v b/verilog/dv/user_risc_boot/user_risc_boot_tb.v
index 79c705b..cf5b14d 100644
--- a/verilog/dv/user_risc_boot/user_risc_boot_tb.v
+++ b/verilog/dv/user_risc_boot/user_risc_boot_tb.v
@@ -75,7 +75,10 @@
`timescale 1 ns / 1 ns
`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
-module user_risc_boot_tb;
+
+`define TB_HEX "user_risc_boot.hex"
+`define TB_TOP user_risc_boot_tb
+module `TB_TOP;
reg clock;
reg wb_rst_i;
reg power1, power2;
@@ -125,11 +128,12 @@
`ifdef WFDUMP
initial begin
$dumpfile("simx.vcd");
- $dumpvars(3, user_risc_boot_tb);
+ $dumpvars(3, `TB_TOP);
end
`endif
initial begin
+ init();
$value$plusargs("risc_core_id=%d", d_risc_id);
@@ -138,26 +142,20 @@
$display("Monitor: Standalone User Risc Boot Test Started");
// Remove Wb Reset
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+ //wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
repeat (2) @(posedge clock);
#1;
// Remove all the reset
if(d_risc_id == 0) begin
$display("STATUS: Working with Risc core 0");
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+ //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
end else begin
$display("STATUS: Working with Risc core 1");
wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
end
-
- // Repeat cycles of 1000 clock edges as needed to complete testbench
- repeat (30) begin
- repeat (1000) @(posedge clock);
- // $display("+1000 cycles");
- end
-
+ wait_riscv_boot();
$display("Monitor: Reading Back the expected value");
// User RISC core expect to write these value in global
@@ -197,11 +195,6 @@
$finish;
end
- initial begin
- wb_rst_i <= 1'b1;
- #100;
- wb_rst_i <= 1'b0; // Release reset
- end
wire USER_VDD1V8 = 1'b1;
wire VSS = 1'b0;
@@ -241,8 +234,8 @@
);
// SSPI Slave I/F
-assign io_in[0] = 1'b1; // RESET
-assign io_in[16] = 1'b0 ; // SPIS SCK
+assign io_in[5] = 1'b1; // RESET
+assign io_in[21] = 1'b0; // CLOCK
`ifndef GL // Drive Power for Hold Fix Buf
@@ -257,28 +250,30 @@
// user core using the gpio pads
// ----------------------------------------------------
- wire flash_clk = io_out[24];
- wire flash_csb = io_out[25];
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
// Creating Pad Delay
- wire #1 io_oeb_29 = io_oeb[29];
- wire #1 io_oeb_30 = io_oeb[30];
- wire #1 io_oeb_31 = io_oeb[31];
- wire #1 io_oeb_32 = io_oeb[32];
- tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
- tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
- tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
- tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
- assign io_in[29] = flash_io0;
- assign io_in[30] = flash_io1;
- assign io_in[31] = flash_io2;
- assign io_in[32] = flash_io3;
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
+
// Quard flash
- s25fl256s #(.mem_file_name("user_risc_boot.hex"),
- .otp_file_name("none"),
+ s25fl256s #(.mem_file_name(`TB_HEX),
+ .otp_file_name("none"),
.TimingModel("S25FL512SAGMFI010_F_30pF"))
- u_spi_flash_256mb (
+ u_spi_flash_256mb
+ (
// Data Inputs/Outputs
.SI (flash_io0),
.SO (flash_io1),
@@ -423,6 +418,7 @@
`endif
**/
+`include "user_tasks.sv"
endmodule
`include "s25fl256s.sv"
`default_nettype wire
diff --git a/verilog/dv/user_risc_boot/user_uart.c b/verilog/dv/user_risc_boot/user_uart.c
deleted file mode 100644
index 04512bc..0000000
--- a/verilog/dv/user_risc_boot/user_uart.c
+++ /dev/null
@@ -1,60 +0,0 @@
-//////////////////////////////////////////////////////////////////////////////
-// SPDX-FileCopyrightText: 2021, Dinesh Annayya
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-// http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-// SPDX-License-Identifier: Apache-2.0
-// SPDX-FileContributor: Dinesh Annayya <dinesha@opencores.org>
-// //////////////////////////////////////////////////////////////////////////
-
-#define SC_SIM_OUTPORT (0xf0000000)
-#define uint32_t long
-
-#define reg_mprj_globl_reg0 (*(volatile uint32_t*)0x30000000)
-#define reg_mprj_globl_reg1 (*(volatile uint32_t*)0x30000004)
-#define reg_mprj_globl_reg2 (*(volatile uint32_t*)0x30000008)
-#define reg_mprj_globl_reg3 (*(volatile uint32_t*)0x3000000C)
-#define reg_mprj_globl_reg4 (*(volatile uint32_t*)0x30000010)
-#define reg_mprj_globl_reg5 (*(volatile uint32_t*)0x30000014)
-#define reg_mprj_globl_reg6 (*(volatile uint32_t*)0x30000018)
-#define reg_mprj_globl_reg7 (*(volatile uint32_t*)0x3000001C)
-#define reg_mprj_globl_reg8 (*(volatile uint32_t*)0x30000020)
-#define reg_mprj_globl_reg9 (*(volatile uint32_t*)0x30000024)
-#define reg_mprj_globl_reg10 (*(volatile uint32_t*)0x30000028)
-#define reg_mprj_globl_reg11 (*(volatile uint32_t*)0x3000002C)
-#define reg_mprj_globl_reg12 (*(volatile uint32_t*)0x30000030)
-#define reg_mprj_globl_reg13 (*(volatile uint32_t*)0x30000034)
-#define reg_mprj_globl_reg14 (*(volatile uint32_t*)0x30000038)
-#define reg_mprj_globl_reg15 (*(volatile uint32_t*)0x3000003C)
-
-#define reg_mprj_uart_reg0 (*(volatile uint32_t*)0x30010000)
-#define reg_mprj_uart_reg1 (*(volatile uint32_t*)0x30010004)
-#define reg_mprj_uart_reg2 (*(volatile uint32_t*)0x30010008)
-#define reg_mprj_uart_reg3 (*(volatile uint32_t*)0x3001000C)
-#define reg_mprj_uart_reg4 (*(volatile uint32_t*)0x30010010)
-#define reg_mprj_uart_reg5 (*(volatile uint32_t*)0x30010014)
-#define reg_mprj_uart_reg6 (*(volatile uint32_t*)0x30010018)
-#define reg_mprj_uart_reg7 (*(volatile uint32_t*)0x3001001C)
-#define reg_mprj_uart_reg8 (*(volatile uint32_t*)0x30010020)
-
-int main()
-{
-
- while(1) {
- // Check UART RX fifo has data, if available loop back the data
- if(reg_mprj_uart_reg8 != 0) {
- reg_mprj_uart_reg5 = reg_mprj_uart_reg6;
- }
- }
-
- return 0;
-}
diff --git a/verilog/dv/user_sema/user_sema_tb.v b/verilog/dv/user_sema/user_sema_tb.v
index 9b61ce6..a4e08a2 100644
--- a/verilog/dv/user_sema/user_sema_tb.v
+++ b/verilog/dv/user_sema/user_sema_tb.v
@@ -269,6 +269,9 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
+assign io_in[16] = 1'b0 ; // SPIS SCK
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
diff --git a/verilog/dv/user_spi_isp/user_spi_isp_tb.v b/verilog/dv/user_spi_isp/user_spi_isp_tb.v
index 95e4e51..7d78ef2 100644
--- a/verilog/dv/user_spi_isp/user_spi_isp_tb.v
+++ b/verilog/dv/user_spi_isp/user_spi_isp_tb.v
@@ -137,16 +137,14 @@
end
initial
begin
- wb_rst_i <= 1'b1;
- #100;
- wb_rst_i <= 1'b0; // Release reset
+ init();
$display("Monitor: Standalone User SPI ISP Test Started");
// Remove Wb Reset
- u_spim.reg_wr_dword(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+ //u_spim.reg_wr_dword(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
repeat (2) @(posedge clock);
#1;
@@ -229,16 +227,17 @@
);
+// SSPI Slave I/F
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
initial begin
end
`endif
-assign io_in[0] = 1'b0;
-assign io_in[16] = sclk;
-assign io_in[15] = sdi;
-assign sdo = io_out[14];
+assign io_in[5] = 1'b0;
+assign io_in[21] = sclk;
+assign io_in[20] = sdi;
+assign sdo = io_out[19];
bfm_spim u_spim (
// SPI
@@ -250,5 +249,6 @@
);
+`include "user_tasks.sv"
endmodule
`default_nettype wire
diff --git a/verilog/dv/user_sram_exec/user_sram_exec_tb.v b/verilog/dv/user_sram_exec/user_sram_exec_tb.v
index a8f6568..555fc4b 100644
--- a/verilog/dv/user_sram_exec/user_sram_exec_tb.v
+++ b/verilog/dv/user_sram_exec/user_sram_exec_tb.v
@@ -138,9 +138,15 @@
if(d_risc_id == 0) begin
$display("STATUS: Working with Risc core 0");
wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
- end else begin
+ end else if(d_risc_id == 1) begin
$display("STATUS: Working with Risc core 1");
wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
+ end else if(d_risc_id == 2) begin
+ $display("STATUS: Working with Risc core 2");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h41F);
+ end else if(d_risc_id == 3) begin
+ $display("STATUS: Working with Risc core 3");
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h81F);
end
@@ -231,6 +237,9 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
+assign io_in[16] = 1'b0 ; // SPIS SCK
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
diff --git a/verilog/dv/user_sspi/user_sspi_tb.v b/verilog/dv/user_sspi/user_sspi_tb.v
index eee28ca..11f2901 100644
--- a/verilog/dv/user_sspi/user_sspi_tb.v
+++ b/verilog/dv/user_sspi/user_sspi_tb.v
@@ -131,38 +131,39 @@
initial begin
$dumpon;
+ init();
#200; // Wait for reset removal
- repeat (10) @(posedge clock);
+ repeat (10) @(posedge clock);
$display("Monitor: Standalone User Risc Boot Test Started");
// Remove Wb Reset
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+ //wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
- // Enable SPI Multi Functional Ports
- // wire cfg_spim_enb = cfg_multi_func_sel[10];
- // wire [3:0] cfg_spim_cs_enb = cfg_multi_func_sel[14:11];
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_MUTI_FUNC,'h7C00);
+ // Enable SPI Multi Functional Ports
+ // wire cfg_spim_enb = cfg_multi_func_sel[10];
+ // wire [3:0] cfg_spim_cs_enb = cfg_multi_func_sel[14:11];
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_MUTI_FUNC,'h7C00);
- repeat (2) @(posedge clock);
+ repeat (2) @(posedge clock);
#1;
- // Remove the reset
+ // Remove the reset
// Remove WB and SPI/UART Reset, Keep CORE under Reset
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h01F);
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h01F);
test_fail = 0;
sspi_init();
- repeat (200) @(posedge clock);
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h1000); // Change the Bank Sel 1000
- $display("############################################");
- $display(" Testing IS62/65WVS1288GALL SSRAM[0] Read/Write Access ");
- $display("############################################");
+ repeat (200) @(posedge clock);
+ wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h1000); // Change the Bank Sel 1000
+ $display("############################################");
+ $display(" Testing IS62/65WVS1288GALL SSRAM[0] Read/Write Access ");
+ $display("############################################");
// SSPI Indirect RAM READ ACCESS-
// Byte Read Option
// <Instr:0x3> <Addr:24Bit Address> <Read Data Out>
- spi_chip_no = 2'b00; // Select the Chip Select to zero
+ spi_chip_no = 2'b00; // Select the Chip Select to zero
sspi_dw_read_check(8'h03,24'h0000,32'h03020100);
sspi_dw_read_check(8'h03,24'h0004,32'h07060504);
sspi_dw_read_check(8'h03,24'h0008,32'h0b0a0908);
@@ -209,13 +210,13 @@
sspi_dw_read_check(8'h03,24'h0208,32'h99AABBCC);
sspi_dw_read_check(8'h03,24'h020C,32'hDDEEFF00);
- $display("############################################");
- $display(" Testing IS62/65WVS1288GALL SSRAM[1] Read/Write Access ");
- $display("############################################");
+ $display("############################################");
+ $display(" Testing IS62/65WVS1288GALL SSRAM[1] Read/Write Access ");
+ $display("############################################");
// SSPI Indirect RAM READ ACCESS-
// Byte Read Option
// <Instr:0x3> <Addr:24Bit Address> <Read Data Out>
- spi_chip_no = 2'b01; // Select the Chip Select to zero
+ spi_chip_no = 2'b01; // Select the Chip Select to zero
sspi_dw_read_check(8'h03,24'h0000,32'h13121110);
sspi_dw_read_check(8'h03,24'h0004,32'h17161514);
sspi_dw_read_check(8'h03,24'h0008,32'h1B1A1918);
@@ -268,13 +269,13 @@
sspi_dw_read_check(8'h03,24'h0208,32'h99AABBCC);
sspi_dw_read_check(8'h03,24'h020C,32'hDDEEFF00);
- $display("############################################");
- $display(" Testing IS62/65WVS1288GALL SSRAM[2] Read/Write Access ");
- $display("############################################");
+ $display("############################################");
+ $display(" Testing IS62/65WVS1288GALL SSRAM[2] Read/Write Access ");
+ $display("############################################");
// SSPI Indirect RAM READ ACCESS-
// Byte Read Option
// <Instr:0x3> <Addr:24Bit Address> <Read Data Out>
- spi_chip_no = 2'b10; // Select the Chip Select to zero
+ spi_chip_no = 2'b10; // Select the Chip Select to zero
sspi_dw_read_check(8'h03,24'h0000,32'h23222120);
sspi_dw_read_check(8'h03,24'h0004,32'h27262524);
sspi_dw_read_check(8'h03,24'h0008,32'h2b2a2928);
@@ -332,13 +333,13 @@
sspi_dw_read_check(8'h03,24'h0208,32'h99AABBCC);
sspi_dw_read_check(8'h03,24'h020C,32'hDDEEFF00);
- $display("############################################");
- $display(" Testing IS62/65WVS1288GALL SSRAM[3] Read/Write Access ");
- $display("############################################");
+ $display("############################################");
+ $display(" Testing IS62/65WVS1288GALL SSRAM[3] Read/Write Access ");
+ $display("############################################");
// SSPI Indirect RAM READ ACCESS-
// Byte Read Option
// <Instr:0x3> <Addr:24Bit Address> <Read Data Out>
- spi_chip_no = 2'b11; // Select the Chip Select to zero
+ spi_chip_no = 2'b11; // Select the Chip Select to zero
sspi_dw_read_check(8'h03,24'h0000,32'h33323130);
sspi_dw_read_check(8'h03,24'h0004,32'h37363534);
sspi_dw_read_check(8'h03,24'h0008,32'h3b3a3938);
@@ -386,14 +387,14 @@
sspi_dw_read_check(8'h03,24'h0208,32'h99AABBCC);
sspi_dw_read_check(8'h03,24'h020C,32'hDDEEFF00);
repeat (100) @(posedge clock);
- // $display("+1000 cycles");
+ // $display("+1000 cycles");
- if(test_fail == 0) begin
- `ifdef GL
- $display("Monitor: SPI Master Mode (GL) Passed");
- `else
- $display("Monitor: SPI Master Mode (RTL) Passed");
- `endif
+ if(test_fail == 0) begin
+ `ifdef GL
+ $display("Monitor: SPI Master Mode (GL) Passed");
+ `else
+ $display("Monitor: SPI Master Mode (RTL) Passed");
+ `endif
end else begin
`ifdef GL
$display("Monitor: SPI Master Mode (GL) Failed");
@@ -405,11 +406,6 @@
$finish;
end
- initial begin
- wb_rst_i <= 1'b1;
- #100;
- wb_rst_i <= 1'b0; // Release reset
- end
wire USER_VDD1V8 = 1'b1;
wire VSS = 1'b0;
@@ -450,7 +446,6 @@
// SSPI Slave I/F
assign io_in[0] = 1'b1; // RESET
-assign io_in[16] = 1'b0 ; // SPIS SCK
`ifndef GL // Drive Power for Hold Fix Buf
@@ -465,15 +460,15 @@
// user core using the gpio pads
// ----------------------------------------------------
wire flash_io1;
- wire flash_clk = io_out[16];
- tri #1 flash_io0 = io_out[15];
- assign io_in[14] = flash_io1;
+ wire flash_clk = io_out[21];
+ tri #1 flash_io0 = io_out[20];
+ assign io_in[19] = flash_io1;
tri #1 flash_io2 = 1'b1;
tri #1 flash_io3 = 1'b1;
- wire spiram_csb0 = io_out[13];
+ wire spiram_csb0 = io_out[18];
is62wvs1288 #(.mem_file_name("flash0.hex"))
u_sfram_0 (
// Data Inputs/Outputs
@@ -486,7 +481,7 @@
.io3 (flash_io3)
);
- wire spiram_csb1 = io_out[12];
+ wire spiram_csb1 = io_out[17];
is62wvs1288 #(.mem_file_name("flash1.hex"))
u_sfram_1 (
// Data Inputs/Outputs
@@ -499,7 +494,7 @@
.io3 (flash_io3)
);
- wire spiram_csb2 = io_out[9];
+ wire spiram_csb2 = io_out[14];
is62wvs1288 #(.mem_file_name("flash2.hex"))
u_sfram_2 (
// Data Inputs/Outputs
@@ -512,7 +507,7 @@
.io3 (flash_io3)
);
- wire spiram_csb3 = io_out[8];
+ wire spiram_csb3 = io_out[13];
is62wvs1288 #(.mem_file_name("flash3.hex"))
u_sfram_3 (
// Data Inputs/Outputs
@@ -665,6 +660,6 @@
`endif
**/
`include "sspi_task.v"
-
+`include "user_tasks.sv"
endmodule
`default_nettype wire
diff --git a/verilog/dv/user_timer/user_timer_tb.v b/verilog/dv/user_timer/user_timer_tb.v
index 5a4f0ab..d39122d 100644
--- a/verilog/dv/user_timer/user_timer_tb.v
+++ b/verilog/dv/user_timer/user_timer_tb.v
@@ -133,26 +133,27 @@
initial begin
$dumpon;
+ init();
#200; // Wait for reset removal
repeat (10) @(posedge clock);
$display("Monitor: Standalone User Risc Boot Test Started");
// Remove Wb Reset
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+ //wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
repeat (2) @(posedge clock);
#1;
// Remove the reset
// Remove WB and SPI/UART Reset, Keep CORE under Reset
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h01F);
+ //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h01F);
// config 1us based on system clock - 1000/25ns = 40
wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_GLBL,39);
// Enable Timer Interrupt
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_MSK,'h700);
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_INTR_MSK,'h007);
test_fail = 0;
repeat (200) @(posedge clock);
@@ -174,12 +175,12 @@
wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_TIMER_2,'h0000_012B);
wb_user_core_read(`ADDR_SPACE_GLBL+`GPIO_CFG_INTR_STAT,read_data);
- if((u_top.u_pinmux.irq_lines[10:8] == 3'b111) && (read_data[10:8] == 3'b111)) begin
+ if((u_top.u_pinmux.irq_lines[2:0] == 3'b111) && (read_data[2:0] == 3'b111)) begin
$display("STATUS: Timer Interrupt detected ");
// Clearing the Timer Interrupt
- wb_user_core_write(`ADDR_SPACE_GLBL+`GPIO_CFG_INTR_CLR,'h700);
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GPIO_CFG_INTR_CLR,'h007);
wb_user_core_read(`ADDR_SPACE_GLBL+`GPIO_CFG_INTR_STAT,read_data);
- if((u_top.u_pinmux.irq_lines[10:8] == 3'b111) && (read_data[10:8] == 3'b000)) begin
+ if((u_top.u_pinmux.irq_lines[2:0] == 3'b111) && (read_data[2:0] == 3'b000)) begin
$display("ERROR: Timer Interrupt not cleared ");
test_fail = 1;
end else begin
@@ -206,12 +207,12 @@
wb_user_core_write(`ADDR_SPACE_TIMER+`TIMER_CFG_TIMER_2,'h0000_012B);
wb_user_core_read(`ADDR_SPACE_GLBL+`GPIO_CFG_INTR_STAT,read_data);
- if((u_top.u_pinmux.irq_lines[10:8] == 3'b111) && (read_data[10:8] == 3'b111)) begin
+ if((u_top.u_pinmux.irq_lines[2:0] == 3'b111) && (read_data[2:0] == 3'b111)) begin
$display("STATUS: Timer Interrupt detected ");
// Clearing the Timer Interrupt
- wb_user_core_write(`ADDR_SPACE_GLBL+`GPIO_CFG_INTR_CLR,'h700);
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GPIO_CFG_INTR_CLR,'h007);
wb_user_core_read(`ADDR_SPACE_GLBL+`GPIO_CFG_INTR_STAT,read_data);
- if((u_top.u_pinmux.irq_lines[10:8] == 3'b111) && (read_data[10:8] == 3'b000)) begin
+ if((u_top.u_pinmux.irq_lines[2:0] == 3'b111) && (read_data[2:0] == 3'b000)) begin
$display("ERROR: Timer Interrupt not cleared ");
test_fail = 1;
end else begin
@@ -242,11 +243,6 @@
$finish;
end
- initial begin
- wb_rst_i <= 1'b1;
- #100;
- wb_rst_i <= 1'b0; // Release reset
- end
wire USER_VDD1V8 = 1'b1;
wire VSS = 1'b0;
@@ -335,6 +331,8 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
@@ -485,5 +483,6 @@
`endif
**/
+`include "user_tasks.sv"
endmodule
`default_nettype wire
diff --git a/verilog/dv/user_uart/Makefile b/verilog/dv/user_uart/Makefile
index 1ca5cd8..fc9b113 100644
--- a/verilog/dv/user_uart/Makefile
+++ b/verilog/dv/user_uart/Makefile
@@ -51,32 +51,32 @@
vvp: ${PATTERN:=.vvp}
%.vvp: %_tb.v
- ${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\" -c -I./ -I$(YIFIVE_FIRMWARE_PATH) user_uart.c -o user_uart.o
+ ${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\" -c -I./ -I$(YIFIVE_FIRMWARE_PATH) ${PATTERN}.c -o ${PATTERN}.o
${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\" -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH) $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
- ${GCC_PREFIX}-gcc -o user_uart.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_uart.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
- ${GCC_PREFIX}-objcopy -O verilog user_uart.elf user_uart.hex
- ${GCC_PREFIX}-objdump -D user_uart.elf > user_uart.dump
- rm crt.o user_uart.o
+ ${GCC_PREFIX}-gcc -o ${PATTERN}.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld ${PATTERN}.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
+ ${GCC_PREFIX}-objcopy -O verilog ${PATTERN}.elf ${PATTERN}.hex
+ ${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
+ rm crt.o ${PATTERN}.o
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
- iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
$< -o $@
else
- iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DRISC_BOOT -DSIM -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
$< -o $@
endif
else
ifeq ($(DUMP),OFF)
- iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
else
- iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
@@ -92,4 +92,4 @@
clean:
rm -f *.elf *.hex *.bin *.vvp *.vcd *.log *.dump
-.PHONY: clean all
+.PHONY: clean hex all
diff --git a/verilog/dv/user_uart/user_uart.c b/verilog/dv/user_uart/user_uart.c
index 4a82878..e75590d 100644
--- a/verilog/dv/user_uart/user_uart.c
+++ b/verilog/dv/user_uart/user_uart.c
@@ -16,27 +16,32 @@
// SPDX-FileContributor: Dinesh Annayya <dinesha@opencores.org>
// //////////////////////////////////////////////////////////////////////////
#define SC_SIM_OUTPORT (0xf0000000)
-#define uint32_t long
+#include "../c_func/inc/int_reg_map.h"
+#include "common_misc.h"
+#include "common_bthread.h"
-#define reg_mprj_uart_reg0 (*(volatile uint32_t*)0x10010000)
-#define reg_mprj_uart_reg1 (*(volatile uint32_t*)0x10010004)
-#define reg_mprj_uart_reg2 (*(volatile uint32_t*)0x10010008)
-#define reg_mprj_uart_reg3 (*(volatile uint32_t*)0x1001000C)
-#define reg_mprj_uart_reg4 (*(volatile uint32_t*)0x10010010)
-#define reg_mprj_uart_reg5 (*(volatile uint32_t*)0x10010014)
-#define reg_mprj_uart_reg6 (*(volatile uint32_t*)0x10010018)
-#define reg_mprj_uart_reg7 (*(volatile uint32_t*)0x1001001C)
-#define reg_mprj_uart_reg8 (*(volatile uint32_t*)0x10010020)
int main()
{
+ reg_glbl_cfg0 |= 0x1F; // Remove Reset for UART
+ reg_glbl_multi_func |=0x100; // Enable UART Multi func
+ reg_uart0_ctrl = 0x07; // Enable Uart Access {3'h0,2'b00,1'b1,1'b1,1'b1}
+
+ // GLBL_CFG_MAIL_BOX used as mail box, each core update boot up handshake at 8 bit
+ // bit[7:0] - core-0
+ // bit[15:8] - core-1
+ // bit[23:16] - core-2
+ // bit[31:24] - core-3
+
+ reg_glbl_mail_box = 0x1 << (bthread_get_core_id() * 8); // Start of Main
+
while(1) {
// Check UART RX fifo has data, if available loop back the data
// Also check txfifo is not full
- if((reg_mprj_uart_reg8 != 0) && ((reg_mprj_uart_reg4 & 0x1) != 0x1)) {
- reg_mprj_uart_reg5 = reg_mprj_uart_reg6;
+ if((reg_uart0_rxfifo_stat != 0) && ((reg_uart0_status & 0x1) != 0x1)) {
+ reg_uart0_txdata = reg_uart0_rxdata;
}
}
diff --git a/verilog/dv/user_uart/user_uart_tb.v b/verilog/dv/user_uart/user_uart_tb.v
index 0096617..a4e25f8 100644
--- a/verilog/dv/user_uart/user_uart_tb.v
+++ b/verilog/dv/user_uart/user_uart_tb.v
@@ -76,9 +76,13 @@
`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
`include "uart_agent.v"
+`include "user_params.svh"
-module user_uart_tb;
+`define TB_HEX "user_uart.hex"
+`define TB_TOP user_uart_tb
+module `TB_TOP;
+
reg clock ;
reg wb_rst_i ;
@@ -146,18 +150,19 @@
`ifdef WFDUMP
initial begin
$dumpfile("simx.vcd");
- $dumpvars(1, user_uart_tb);
- $dumpvars(1, user_uart_tb.u_top);
+ $dumpvars(1, `TB_TOP);
+ $dumpvars(2, `TB_TOP.u_top);
+ $dumpvars(0, `TB_TOP.u_top.u_wb_host);
+ $dumpvars(0, `TB_TOP.u_top.u_pinmux);
end
`endif
- initial begin
- wb_rst_i <= 1'b1;
- #100;
- wb_rst_i <= 1'b0; // Release reset
- end
+
initial
begin
+
+ init();
+
uart_data_bit = 2'b11;
uart_stop_bits = 0; // 0: 1 stop bit; 1: 2 stop bit;
uart_stick_parity = 0; // 1: force even parity
@@ -174,17 +179,17 @@
$display("Monitor: Standalone User Uart Test Started");
// Remove Wb Reset
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+ //wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
// Enable UART Multi Functional Ports
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_MUTI_FUNC,'h100);
+ //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_MUTI_FUNC,'h100);
repeat (2) @(posedge clock);
#1;
// Remove all the reset
if(d_risc_id == 0) begin
$display("STATUS: Working with Risc core 0");
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
+ //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h11F);
end else if(d_risc_id == 1) begin
$display("STATUS: Working with Risc core 1");
wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h21F);
@@ -199,11 +204,12 @@
repeat (100) @(posedge clock); // wait for Processor Get Ready
tb_uart.uart_init;
- wb_user_core_write(`ADDR_SPACE_UART0+8'h0,{3'h0,2'b00,1'b1,1'b1,1'b1});
+ //wb_user_core_write(`ADDR_SPACE_UART0+`UART_CTRL,{3'h0,2'b00,1'b1,1'b1,1'b1});
tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity,
uart_stick_parity, uart_timeout, uart_divisor);
- repeat (30000) @(posedge clock); // wait for Processor Get Ready
+
+ wait_riscv_boot();
for (i=0; i<40; i=i+1)
@@ -301,8 +307,8 @@
);
// SSPI Slave I/F
-assign io_in[0] = 1'b1; // RESET
-assign io_in[16] = 1'b0 ; // SPIS SCK
+assign io_in[5] = 1'b1; // RESET
+assign io_in[21] = 1'b0; // CLOCK
`ifndef GL // Drive Power for Hold Fix Buf
@@ -317,26 +323,26 @@
// user core using the gpio pads
// ----------------------------------------------------
- wire flash_clk = io_out[24];
- wire flash_csb = io_out[25];
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
// Creating Pad Delay
- wire #1 io_oeb_29 = io_oeb[29];
- wire #1 io_oeb_30 = io_oeb[30];
- wire #1 io_oeb_31 = io_oeb[31];
- wire #1 io_oeb_32 = io_oeb[32];
- tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
- tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
- tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
- tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
- assign io_in[29] = flash_io0;
- assign io_in[30] = flash_io1;
- assign io_in[31] = flash_io2;
- assign io_in[32] = flash_io3;
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
// Quard flash
- s25fl256s #(.mem_file_name("user_uart.hex"),
+ s25fl256s #(.mem_file_name(`TB_HEX),
.otp_file_name("none"),
.TimingModel("S25FL512SAGMFI010_F_30pF"))
u_spi_flash_256mb
@@ -359,8 +365,8 @@
// --------------------------
wire uart_txd,uart_rxd;
-assign uart_txd = io_out[2];
-assign io_in[1] = uart_rxd ;
+assign uart_txd = io_out[7];
+assign io_in[6] = uart_rxd ;
uart_agent tb_uart(
.mclk (clock ),
@@ -424,6 +430,40 @@
end
endtask
+task wb_user_core_read_check;
+input [31:0] address;
+output [31:0] data;
+input [31:0] cmp_data;
+reg [31:0] data;
+begin
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_adr_i =address; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='0; // data output
+ wbd_ext_sel_i ='hF; // byte enable
+ wbd_ext_cyc_i ='h1; // strobe/request
+ wbd_ext_stb_i ='h1; // strobe/request
+ wait(wbd_ext_ack_o == 1);
+ repeat (1) @(negedge clock);
+ data = wbd_ext_dat_o;
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ if(data !== cmp_data) begin
+ $display("ERROR : WB USER ACCESS READ Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
+ `TB_TOP.test_fail = 1;
+ end else begin
+ $display("STATUS: WB USER ACCESS READ Address : 0x%x, Data : 0x%x",address,data);
+ end
+ repeat (2) @(posedge clock);
+end
+endtask
`ifdef GL
wire wbd_spi_stb_i = u_top.u_qspi_master.wbd_stb_i;
@@ -463,6 +503,7 @@
`endif
**/
+`include "user_tasks.sv"
endmodule
`include "s25fl256s.sv"
`default_nettype wire
diff --git a/verilog/dv/user_uart1/Makefile b/verilog/dv/user_uart1/Makefile
index c6bc358..280fed2 100644
--- a/verilog/dv/user_uart1/Makefile
+++ b/verilog/dv/user_uart1/Makefile
@@ -51,32 +51,32 @@
vvp: ${PATTERN:=.vvp}
%.vvp: %_tb.v
- ${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\" -c -I./ -I$(YIFIVE_FIRMWARE_PATH) user_uart.c -o user_uart.o
+ ${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\" -c -I./ -I$(YIFIVE_FIRMWARE_PATH) ${PATTERN}.c -o ${PATTERN}.o
${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\" -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH) $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
- ${GCC_PREFIX}-gcc -o user_uart.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_uart.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
- ${GCC_PREFIX}-objcopy -O verilog user_uart.elf user_uart.hex
- ${GCC_PREFIX}-objdump -D user_uart.elf > user_uart.dump
- rm crt.o user_uart.o
+ ${GCC_PREFIX}-gcc -o ${PATTERN}.elf -T $(YIFIVE_FIRMWARE_PATH)/link.ld ${PATTERN}.o crt.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32 -N
+ ${GCC_PREFIX}-objcopy -O verilog ${PATTERN}.elf ${PATTERN}.hex
+ ${GCC_PREFIX}-objdump -D ${PATTERN}.elf > ${PATTERN}.dump
+ rm crt.o ${PATTERN}.o
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
- iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -DRISC_BOOT -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
$< -o $@
else
- iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DRISC_BOOT -DSIM -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.rtl.lib \
$< -o $@
endif
else
ifeq ($(DUMP),OFF)
- iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
else
- iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DRISC_BOOT -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
diff --git a/verilog/dv/user_uart1/user_uart.c b/verilog/dv/user_uart1/user_uart.c
deleted file mode 100644
index ac8c50f..0000000
--- a/verilog/dv/user_uart1/user_uart.c
+++ /dev/null
@@ -1,43 +0,0 @@
-//////////////////////////////////////////////////////////////////////////////
-// SPDX-FileCopyrightText: 2021, Dinesh Annayya
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-// http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-// SPDX-License-Identifier: Apache-2.0
-// SPDX-FileContributor: Dinesh Annayya <dinesha@opencores.org>
-// //////////////////////////////////////////////////////////////////////////
-#define SC_SIM_OUTPORT (0xf0000000)
-#define uint32_t long
-
-
-#define reg_mprj_uart_reg0 (*(volatile uint32_t*)0x10010100)
-#define reg_mprj_uart_reg1 (*(volatile uint32_t*)0x10010104)
-#define reg_mprj_uart_reg2 (*(volatile uint32_t*)0x10010108)
-#define reg_mprj_uart_reg3 (*(volatile uint32_t*)0x1001010C)
-#define reg_mprj_uart_reg4 (*(volatile uint32_t*)0x10010110)
-#define reg_mprj_uart_reg5 (*(volatile uint32_t*)0x10010114)
-#define reg_mprj_uart_reg6 (*(volatile uint32_t*)0x10010118)
-#define reg_mprj_uart_reg7 (*(volatile uint32_t*)0x1001011C)
-#define reg_mprj_uart_reg8 (*(volatile uint32_t*)0x10010120)
-
-int main()
-{
-
- while(1) {
- // Check UART RX fifo has data, if available loop back the data
- if(reg_mprj_uart_reg8 != 0) {
- reg_mprj_uart_reg5 = reg_mprj_uart_reg6;
- }
- }
-
- return 0;
-}
diff --git a/verilog/dv/user_uart1/user_uart1.c b/verilog/dv/user_uart1/user_uart1.c
new file mode 100644
index 0000000..e680062
--- /dev/null
+++ b/verilog/dv/user_uart1/user_uart1.c
@@ -0,0 +1,49 @@
+//////////////////////////////////////////////////////////////////////////////
+// SPDX-FileCopyrightText: 2021, Dinesh Annayya
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+// SPDX-FileContributor: Dinesh Annayya <dinesha@opencores.org>
+// //////////////////////////////////////////////////////////////////////////
+#define SC_SIM_OUTPORT (0xf0000000)
+#include "../c_func/inc/int_reg_map.h"
+#include "common_misc.h"
+#include "common_bthread.h"
+
+
+
+int main()
+{
+
+ reg_glbl_cfg0 |= 0x43; // Remove Reset for UART
+ reg_glbl_multi_func |=0x200; // Enable UART Multi func
+ reg_uart1_ctrl = 0x07; // Enable Uart Access {3'h0,2'b00,1'b1,1'b1,1'b1}
+
+ // GLBL_CFG_MAIL_BOX used as mail box, each core update boot up handshake at 8 bit
+ // bit[7:0] - core-0
+ // bit[15:8] - core-1
+ // bit[23:16] - core-2
+ // bit[31:24] - core-3
+
+ reg_glbl_mail_box = 0x1 << (bthread_get_core_id() * 8); // Start of Main
+
+ while(1) {
+ // Check UART RX fifo has data, if available loop back the data
+ // Also check txfifo is not full
+ if((reg_uart1_rxfifo_stat != 0) && ((reg_uart1_status & 0x1) != 0x1)) {
+ reg_uart1_txdata = reg_uart1_rxdata;
+ }
+ }
+
+ return 0;
+}
diff --git a/verilog/dv/user_uart1/user_uart1_tb.v b/verilog/dv/user_uart1/user_uart1_tb.v
index 6a2d3c5..8559565 100644
--- a/verilog/dv/user_uart1/user_uart1_tb.v
+++ b/verilog/dv/user_uart1/user_uart1_tb.v
@@ -78,7 +78,9 @@
`include "uart_agent.v"
-module user_uart1_tb;
+`define TB_HEX "user_uart1.hex"
+`define TB_TOP user_uart1_tb
+module `TB_TOP;
reg clock ;
reg wb_rst_i ;
@@ -146,17 +148,19 @@
`ifdef WFDUMP
initial begin
$dumpfile("simx.vcd");
- $dumpvars(0, user_uart1_tb);
+ $dumpvars(1, `TB_TOP);
+ $dumpvars(1, `TB_TOP.u_top);
+ $dumpvars(1, `TB_TOP.u_top.u_wb_host);
+ $dumpvars(1, `TB_TOP.u_top.u_pinmux);
+ $dumpvars(1, `TB_TOP.u_top.u_uart_i2c_usb_spi);
end
`endif
- initial begin
- wb_rst_i <= 1'b1;
- #100;
- wb_rst_i <= 1'b0; // Release reset
- end
initial
begin
+
+ init();
+
uart_data_bit = 2'b11;
uart_stop_bits = 0; // 0: 1 stop bit; 1: 2 stop bit;
uart_stick_parity = 0; // 1: force even parity
@@ -173,17 +177,17 @@
$display("Monitor: Standalone User Uart Test Started");
// Remove Wb Reset
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
+ //wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
// Enable UART Multi Functional Ports
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_MUTI_FUNC,'h200);
+ //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_MUTI_FUNC,'h200);
repeat (2) @(posedge clock);
#1;
// Remove all the reset
if(d_risc_id == 0) begin
$display("STATUS: Working with Risc core 0");
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h143);
+ //wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h143);
end else if(d_risc_id == 1) begin
$display("STATUS: Working with Risc core 1");
wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h243);
@@ -198,11 +202,12 @@
repeat (100) @(posedge clock); // wait for Processor Get Ready
tb_uart.uart_init;
- wb_user_core_write(`ADDR_SPACE_UART1+8'h0,{3'h0,2'b00,1'b1,1'b1,1'b1});
+ //wb_user_core_write(`ADDR_SPACE_UART1+`UART_CTRL,{3'h0,2'b00,1'b1,1'b1,1'b1});
tb_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity,
uart_stick_parity, uart_timeout, uart_divisor);
- repeat (30000) @(posedge clock); // wait for Processor Get Ready
+
+ wait_riscv_boot();
for (i=0; i<40; i=i+1)
@@ -300,8 +305,8 @@
);
// SSPI Slave I/F
-assign io_in[0] = 1'b1; // RESET
-assign io_in[16] = 1'b0 ; // SPIS SCK
+assign io_in[5] = 1'b1; // RESET
+assign io_in[21] = 1'b0; // CLOCK
`ifndef GL // Drive Power for Hold Fix Buf
@@ -316,26 +321,26 @@
// user core using the gpio pads
// ----------------------------------------------------
- wire flash_clk = io_out[24];
- wire flash_csb = io_out[25];
+ wire flash_clk = io_out[28];
+ wire flash_csb = io_out[29];
// Creating Pad Delay
- wire #1 io_oeb_29 = io_oeb[29];
- wire #1 io_oeb_30 = io_oeb[30];
- wire #1 io_oeb_31 = io_oeb[31];
- wire #1 io_oeb_32 = io_oeb[32];
- tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[29] : 1'bz;
- tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[30] : 1'bz;
- tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[31] : 1'bz;
- tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[32] : 1'bz;
+ wire #1 io_oeb_29 = io_oeb[33];
+ wire #1 io_oeb_30 = io_oeb[34];
+ wire #1 io_oeb_31 = io_oeb[35];
+ wire #1 io_oeb_32 = io_oeb[36];
+ tri #1 flash_io0 = (io_oeb_29== 1'b0) ? io_out[33] : 1'bz;
+ tri #1 flash_io1 = (io_oeb_30== 1'b0) ? io_out[34] : 1'bz;
+ tri #1 flash_io2 = (io_oeb_31== 1'b0) ? io_out[35] : 1'bz;
+ tri #1 flash_io3 = (io_oeb_32== 1'b0) ? io_out[36] : 1'bz;
- assign io_in[29] = flash_io0;
- assign io_in[30] = flash_io1;
- assign io_in[31] = flash_io2;
- assign io_in[32] = flash_io3;
+ assign io_in[33] = flash_io0;
+ assign io_in[34] = flash_io1;
+ assign io_in[35] = flash_io2;
+ assign io_in[36] = flash_io3;
// Quard flash
- s25fl256s #(.mem_file_name("user_uart.hex"),
+ s25fl256s #(.mem_file_name(`TB_HEX),
.otp_file_name("none"),
.TimingModel("S25FL512SAGMFI010_F_30pF"))
u_spi_flash_256mb
@@ -358,8 +363,8 @@
// --------------------------
wire uart_txd,uart_rxd;
-assign uart_txd = io_out[5];
-assign io_in[3] = uart_rxd ;
+assign uart_txd = io_out[10];
+assign io_in[8] = uart_rxd ;
uart_agent tb_uart(
.mclk (clock ),
@@ -423,6 +428,40 @@
end
endtask
+task wb_user_core_read_check;
+input [31:0] address;
+output [31:0] data;
+input [31:0] cmp_data;
+reg [31:0] data;
+begin
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_adr_i =address; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='0; // data output
+ wbd_ext_sel_i ='hF; // byte enable
+ wbd_ext_cyc_i ='h1; // strobe/request
+ wbd_ext_stb_i ='h1; // strobe/request
+ wait(wbd_ext_ack_o == 1);
+ repeat (1) @(negedge clock);
+ data = wbd_ext_dat_o;
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ if(data !== cmp_data) begin
+ $display("ERROR : WB USER ACCESS READ Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
+ `TB_TOP.test_fail = 1;
+ end else begin
+ $display("STATUS: WB USER ACCESS READ Address : 0x%x, Data : 0x%x",address,data);
+ end
+ repeat (2) @(posedge clock);
+end
+endtask
`ifdef GL
wire wbd_spi_stb_i = u_top.u_qspi_master.wbd_stb_i;
@@ -462,6 +501,7 @@
`endif
**/
+`include "user_tasks.sv"
endmodule
`include "s25fl256s.sv"
`default_nettype wire
diff --git a/verilog/dv/user_uart_master/user_uart_master_tb.v b/verilog/dv/user_uart_master/user_uart_master_tb.v
index 4ed2f00..5d9006b 100644
--- a/verilog/dv/user_uart_master/user_uart_master_tb.v
+++ b/verilog/dv/user_uart_master/user_uart_master_tb.v
@@ -149,7 +149,7 @@
end
initial
begin
- wb_rst_i <= 1'b1;
+ init();
uart_data_bit = 2'b11;
uart_stop_bits = 1; // 0: 1 stop bit; 1: 2 stop bit;
uart_stick_parity = 0; // 1: force even parity
@@ -167,7 +167,6 @@
la_data_in[17:16] = 2'b00; // priority mode, 0 -> nop, 1 -> Even, 2 -> Odd
#100;
- wb_rst_i <= 1'b0; // Release reset
$display("Monitor: Standalone User Uart master Test Started");
@@ -269,6 +268,8 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
`ifndef GL // Drive Power for Hold Fix Buf
// All standard cell need power hook-up for functionality work
@@ -282,8 +283,8 @@
// --------------------------
wire uart_txd,uart_rxd;
-assign uart_txd = io_out[35];
-assign io_in[34] = uart_rxd ;
+assign uart_txd = io_out[23];
+assign io_in[22] = uart_rxd ;
uart_agent tb_master_uart(
.mclk (clock ),
@@ -294,5 +295,6 @@
`include "uart_master_tasks.sv"
+`include "user_tasks.sv"
endmodule
`default_nettype wire
diff --git a/verilog/dv/user_usb/user_usb_tb.v b/verilog/dv/user_usb/user_usb_tb.v
index 98115f7..b63b948 100644
--- a/verilog/dv/user_usb/user_usb_tb.v
+++ b/verilog/dv/user_usb/user_usb_tb.v
@@ -166,34 +166,30 @@
initial begin
$dumpon;
-
+ init();
#200; // Wait for reset removal
repeat (10) @(posedge clock);
$display("Monitor: Standalone User Risc Boot Test Started");
- // Remove Wb/PinMux Reset
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
- // Enable SPI Multi Functional Ports
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_MUTI_FUNC,'h400);
+ // Enable USB Multi Functional Ports
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_MUTI_FUNC,'h10000);
repeat (2) @(posedge clock);
#1;
- // Remove Wb/PinMux Reset
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
- // Set USB clock : 180/3 = 60Mhz
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_CLK_CTRL2,{8'h0,8'h61,8'h0,8'h0});
+ // Set USB clock : 180/3 = 60Mhz
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CLK_CTRL,{16'h0,8'h61,8'h0});
- // Remove the reset
+ // Remove the reset
// Remove WB and SPI/UART Reset, Keep CORE under Reset
- wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h03F);
+ wb_user_core_write(`ADDR_SPACE_GLBL+`GLBL_CFG_CFG0,'h03F);
test_fail = 0;
- repeat (200) @(posedge clock);
- wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h1000); // Change the Bank Sel 10
+ repeat (200) @(posedge clock);
+ wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_BANK_SEL,'h1000); // Change the Bank Sel 10
//usb_test1;
@@ -257,6 +253,11 @@
.user_irq ()
);
+// SSPI Slave I/F
+assign io_in[0] = 1'b1; // RESET
+
+
+
usb_agent u_usb_agent();
test_control test_control();
@@ -269,11 +270,11 @@
// Drive USB Pads
//
-tri usbd_txdp = (io_oeb[36] == 1'b0) ? io_out[36] : 1'bz;
-tri usbd_txdn = (io_oeb[37] == 1'b0) ? io_out[37] : 1'bz;
+tri usbd_txdp = (io_oeb[24] == 1'b0) ? io_out[24] : 1'bz;
+tri usbd_txdn = (io_oeb[25] == 1'b0) ? io_out[25] : 1'bz;
-assign io_in[36] = usbd_txdp;
-assign io_in[37] = usbd_txdn;
+assign io_in[24] = usbd_txdp;
+assign io_in[25] = usbd_txdn;
// Full Speed Device Indication
@@ -551,6 +552,6 @@
**/
`include "tests/usb_test1.v"
`include "tests/usb_test2.v"
-
+`include "user_tasks.sv"
endmodule
`default_nettype wire
diff --git a/verilog/dv/wb_port/wb_port.c b/verilog/dv/wb_port/wb_port.c
index 642303c..99df59c 100644
--- a/verilog/dv/wb_port/wb_port.c
+++ b/verilog/dv/wb_port/wb_port.c
@@ -18,12 +18,9 @@
// This include is relative to $CARAVEL_PATH (see Makefile)
#include <defs.h>
#include <stub.c>
-#include "../c_func/inc/user_reg_map.h"
+#include "../c_func/inc/ext_reg_map.h"
-// User Project Slaves (0x3000_0000)
-#define reg_mprj_slave (*(volatile uint32_t*)0x30000000)
-#define reg_mprj_wbhost_reg0 (*(volatile uint32_t*)0x30080000)
@@ -95,7 +92,7 @@
reg_mprj_datal = 0xAB600000;
// Remove Wishbone Reset
- reg_mprj_wbhost_reg0 = 0x1;
+ reg_mprj_wbhost_ctrl = 0x1;
// Remove Reset
reg_glbl_cfg0 = 0x01f;
diff --git a/verilog/includes/includes.gl.caravel_user_project b/verilog/includes/includes.gl.caravel_user_project
index d355b07..5a964c4 100644
--- a/verilog/includes/includes.gl.caravel_user_project
+++ b/verilog/includes/includes.gl.caravel_user_project
@@ -29,8 +29,10 @@
#-v $(USER_PROJECT_VERILOG)/rtl/yifive/ycr2c/src/cache/src/core/icache_top.sv
#-v $(USER_PROJECT_VERILOG)/rtl/yifive/ycr2c/src/cache/src/core/icache_app_fsm.sv
#-v $(USER_PROJECT_VERILOG)/rtl/yifive/ycr2c/src/lib/ycr_async_wbb.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/yifive/ycr2c/src/lib/sync_fifo2.sv
#-v $(USER_PROJECT_VERILOG)/rtl/yifive/ycr2c/src/top/ycr_dmem_wb.sv
#-v $(USER_PROJECT_VERILOG)/rtl/yifive/ycr2c/src/top/ycr_intf.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/yifive/ycr2c/src/top/ycr_sram_mux.sv
#else
$(USER_PROJECT_VERILOG)/gl/ycr_intf.v
#endif
@@ -75,6 +77,8 @@
#-v $(USER_PROJECT_VERILOG)/rtl/yifive/ycr2c/src/core/pipeline/ycr_pipe_hdu.sv
#-v $(USER_PROJECT_VERILOG)/rtl/yifive/ycr2c/src/core/pipeline/ycr_pipe_tdu.sv
#-v $(USER_PROJECT_VERILOG)/rtl/yifive/ycr2c/src/core/pipeline/ycr_ipic.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/yifive/ycr2c/src/core/primitives/ycr_reset_cells.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/yifive/ycr2c/src/top/ycr_req_retiming.sv
#else
$(USER_PROJECT_VERILOG)/gl/ycr_core_top.v
#endif
@@ -99,10 +103,28 @@
### WB_HOST
##################################################
#ifdef WB_HOST_RTL
+#-v $(USER_PROJECT_VERILOG)/rtl/clk_skew_adjust/src/clk_skew_adjust.v
#-v $(USER_PROJECT_VERILOG)/rtl/wb_host/src/wb_host.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/wb_host/src/wb_reset_fsm.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/async_fifo.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/async_wb.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/clk_ctl.v
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/ctech_cells.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/registers.v
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/reset_sync.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/async_reg_bus.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/double_sync_low.v
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/clk_div8.v
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/async_fifo_th.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/wb_interconnect/src/wb_arb.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/uart/src/uart_txfsm.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/uart/src/uart_rxfsm.sv
#-v $(USER_PROJECT_VERILOG)/rtl/uart2wb/src/uart2wb.sv
#-v $(USER_PROJECT_VERILOG)/rtl/uart2wb/src/uart2_core.sv
#-v $(USER_PROJECT_VERILOG)/rtl/uart2wb/src/uart_msg_handler.v
+#-v $(USER_PROJECT_VERILOG)/rtl/sspis/src/sspis_top.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/sspis/src/sspis_if.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/sspis/src/spi2wb.sv
#else
$(USER_PROJECT_VERILOG)/gl/wb_host.v
#endif
@@ -111,11 +133,32 @@
### PINMUX
##################################################
#ifdef PINMUX_RTL
+#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/pinmux_top.sv
#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/pinmux.sv
-#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/pinmux_reg.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/glbl_reg.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/gpio_top.sv
#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/gpio_intr.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/gpio_reg.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/pwm_top.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/pwm_reg.sv
#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/pwm.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/timer_top.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/timer_reg.sv
#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/timer.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/semaphore_reg.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/ws281x_top.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/ws281x_driver.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/ws281x_reg.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/strap_ctrl.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/glbl_rst_reg.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/pulse_gen_type1.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/pulse_gen_type2.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/registers.v
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/ctech_cells.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/reset_sync.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/sync_fifo.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/clk_ctl.v
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/clk_skew_adjust.gv
#else
$(USER_PROJECT_VERILOG)/gl/pinmux_top.v
#endif
@@ -141,6 +184,7 @@
#-v $(USER_PROJECT_VERILOG)/rtl/sspim/src/sspim_ctl.sv
#-v $(USER_PROJECT_VERILOG)/rtl/sspim/src/sspim_if.sv
#-v $(USER_PROJECT_VERILOG)/rtl/sspim/src/sspim_cfg.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/sspim/src/sspim_clkgen.sv
#-v $(USER_PROJECT_VERILOG)/rtl/uart_i2c_usb_spi/src/uart_i2c_usb_spi.sv
#else
$(USER_PROJECT_VERILOG)/gl/uart_i2c_usb_spi_top.v
@@ -152,6 +196,7 @@
#ifdef WB_INTER_RTL
#-v $(USER_PROJECT_VERILOG)/rtl/wb_interconnect/src/wb_slave_port.sv
#-v $(USER_PROJECT_VERILOG)/rtl/wb_interconnect/src/wb_interconnect.sv
+#-v $(USER_PROJECT_VERILOG)/rtl/lib/sync_wbb.sv
#else
$(USER_PROJECT_VERILOG)/gl/wb_interconnect.v
#endif
diff --git a/verilog/includes/includes.gl.lib b/verilog/includes/includes.gl.lib
index d82a5c2..9a0c428 100644
--- a/verilog/includes/includes.gl.lib
+++ b/verilog/includes/includes.gl.lib
@@ -1,11 +1,14 @@
###########################################################
# STD CELLS - they need to be below the defines.v files
###########################################################
--v $(PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/verilog/sky130_fd_io.v
--v $(PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/verilog/sky130_ef_io.v
--v $(PDK_ROOT)/sky130A/libs.ref/sky130_fd_sc_hd/verilog/primitives.v
--v $(PDK_ROOT)/sky130A/libs.ref/sky130_fd_sc_hd/verilog/sky130_fd_sc_hd.v
--v $(PDK_ROOT)/sky130A/libs.ref/sky130_fd_sc_hvl/verilog/primitives.v
--v $(PDK_ROOT)/sky130A/libs.ref/sky130_fd_sc_hvl/verilog/sky130_fd_sc_hvl.v
+-v $(PDK_ROOT)/sky130B/libs.ref/sky130_fd_io/verilog/sky130_fd_io.v
+-v $(PDK_ROOT)/sky130B/libs.ref/sky130_fd_io/verilog/sky130_ef_io.v
+-v $(PDK_ROOT)/sky130B/libs.ref/sky130_fd_sc_hd/verilog/primitives.v
+-v $(PDK_ROOT)/sky130B/libs.ref/sky130_fd_sc_hd/verilog/sky130_fd_sc_hd.v
+-v $(PDK_ROOT)/sky130B/libs.ref/sky130_fd_sc_hvl/verilog/primitives.v
+-v $(PDK_ROOT)/sky130B/libs.ref/sky130_fd_sc_hvl/verilog/sky130_fd_sc_hvl.v
-$(USER_PROJECT_VERILOG)/gl/digital_pll.v
+#$(USER_PROJECT_VERILOG)/gl/digital_pll.v
+-v $(USER_PROJECT_VERILOG)/rtl/digital_pll/src/digital_pll_controller.v
+-v $(USER_PROJECT_VERILOG)/rtl/digital_pll/src/digital_pll.v
+-v $(USER_PROJECT_VERILOG)/rtl/digital_pll/src/ring_osc2x13.v
diff --git a/verilog/includes/includes.rtl.caravel_user_project b/verilog/includes/includes.rtl.caravel_user_project
index 01f8d3c..ff47b70 100644
--- a/verilog/includes/includes.rtl.caravel_user_project
+++ b/verilog/includes/includes.rtl.caravel_user_project
@@ -20,8 +20,14 @@
-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/timer_reg.sv
-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/timer.sv
-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/semaphore_reg.sv
+-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/ws281x_top.sv
+-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/ws281x_driver.sv
+-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/ws281x_reg.sv
+-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/strap_ctrl.sv
+-v $(USER_PROJECT_VERILOG)/rtl/pinmux/src/glbl_rst_reg.sv
-v $(USER_PROJECT_VERILOG)/rtl/lib/pulse_gen_type1.sv
-v $(USER_PROJECT_VERILOG)/rtl/lib/pulse_gen_type2.sv
+-v $(USER_PROJECT_VERILOG)/rtl/lib/clk_div8.v
-v $(USER_PROJECT_VERILOG)/rtl/qspim/src/qspim_top.sv
-v $(USER_PROJECT_VERILOG)/rtl/qspim/src/qspim_if.sv
-v $(USER_PROJECT_VERILOG)/rtl/qspim/src/qspim_fifo.sv
@@ -62,6 +68,7 @@
-v $(USER_PROJECT_VERILOG)/rtl/lib/ser_shift.sv
-v $(USER_PROJECT_VERILOG)/rtl/digital_core/src/glbl_cfg.sv
-v $(USER_PROJECT_VERILOG)/rtl/wb_host/src/wb_host.sv
+-v $(USER_PROJECT_VERILOG)/rtl/wb_host/src/wb_reset_fsm.sv
-v $(USER_PROJECT_VERILOG)/rtl/sspis/src/sspis_top.sv
-v $(USER_PROJECT_VERILOG)/rtl/sspis/src/sspis_if.sv
-v $(USER_PROJECT_VERILOG)/rtl/sspis/src/spi2wb.sv
diff --git a/verilog/rtl/digital_pll/src/digital_pll.v b/verilog/rtl/digital_pll/src/digital_pll.v
index f5400d8..a4f189b 100644
--- a/verilog/rtl/digital_pll/src/digital_pll.v
+++ b/verilog/rtl/digital_pll/src/digital_pll.v
@@ -13,6 +13,39 @@
// limitations under the License.
// SPDX-License-Identifier: Apache-2.0
+
+/*****************************************************************
+
+Offset bcount 4x clock period clock period (ns) clock (Mhz)
+1.168 0 1.168 4.672 214.041095890411
+1.168 1 1.18 4.72 211.864406779661
+1.168 2 1.192 4.768 209.731543624161
+1.168 3 1.204 4.816 207.641196013289
+1.168 4 1.216 4.864 205.592105263158
+1.168 5 1.228 4.912 203.583061889251
+1.168 6 1.24 4.96 201.612903225806
+1.168 7 1.252 5.008 199.680511182109
+1.168 8 1.264 5.056 197.784810126582
+1.168 9 1.276 5.104 195.924764890282
+1.168 10 1.288 5.152 194.099378881988
+1.168 11 1.3 5.2 192.307692307692
+1.168 12 1.312 5.248 190.548780487805
+1.168 13 1.324 5.296 188.821752265861
+1.168 14 1.336 5.344 187.125748502994
+1.168 15 1.348 5.392 185.459940652819
+1.168 16 1.36 5.44 183.823529411765
+1.168 17 1.372 5.488 182.215743440233
+1.168 18 1.384 5.536 180.635838150289
+1.168 19 1.396 5.584 179.083094555874
+1.168 20 1.408 5.632 177.556818181818
+1.168 21 1.42 5.68 176.056338028169
+1.168 22 1.432 5.728 174.581005586592
+1.168 23 1.444 5.776 173.130193905817
+1.168 24 1.456 5.824 171.703296703297
+1.168 25 1.468 5.872 170.299727520436
+1.168 26 1.48 5.92 168.918918918919
+
+**************************************************/
`default_nettype none
// Digital PLL (ring oscillator + controller)
// Technically this is a frequency locked loop, not a phase locked loop.
diff --git a/verilog/rtl/i2cm/src/core/i2cm_byte_ctrl.v b/verilog/rtl/i2cm/src/core/i2cm_byte_ctrl.v
index 002b51e..e50d66b 100755
--- a/verilog/rtl/i2cm/src/core/i2cm_byte_ctrl.v
+++ b/verilog/rtl/i2cm/src/core/i2cm_byte_ctrl.v
@@ -95,6 +95,7 @@
output reg cmd_ack,
output reg ack_out,
output i2c_busy,
+ output i2c_fsm_busy,
output i2c_al,
output [7:0] dout,
@@ -161,6 +162,9 @@
.sda_oen ( sda_oen )
);
+ // Generate I2C FSM Busy
+ assign i2c_fsm_busy = (c_state !=0);
+
// generate go-signal
assign go = (read | write | stop) & ~cmd_ack;
diff --git a/verilog/rtl/i2cm/src/core/i2cm_top.v b/verilog/rtl/i2cm/src/core/i2cm_top.v
index 3b32db9..2fea533 100755
--- a/verilog/rtl/i2cm/src/core/i2cm_top.v
+++ b/verilog/rtl/i2cm/src/core/i2cm_top.v
@@ -40,6 +40,8 @@
// 1. Initail version picked from
// http://www.opencores.org/projects/i2c/
// 2. renaming of reset signal to aresetn and sresetn
+// v0.1 - Dinesh A, 28th Aug 2022
+// Generated i2c_fsm_busy to identify fsm busy state
//
//////////////////////////////////////////////////////////////////////
//// ////
@@ -123,6 +125,7 @@
reg tip; // transfer in progress
reg irq_flag; // interrupt pending flag
wire i2c_busy; // bus busy (start signal detected)
+ wire i2c_fsm_busy;// i2C FSM Busy
wire i2c_al; // i2c bus arbitration lost
reg al; // status register arbitration lost bit
@@ -212,28 +215,29 @@
// hookup byte controller block
i2cm_byte_ctrl u_byte_ctrl (
- .clk ( wb_clk_i ),
- .sresetn ( sresetn ),
- .aresetn ( aresetn ),
- .ena ( core_en ),
- .clk_cnt ( prer ),
- .start ( sta ),
- .stop ( sto ),
- .read ( rd ),
- .write ( wr ),
- .ack_in ( ack ),
- .din ( txr ),
- .cmd_ack ( done ),
- .ack_out ( irxack ),
- .dout ( rxr ),
- .i2c_busy ( i2c_busy ),
- .i2c_al ( i2c_al ),
- .scl_i ( scl_pad_i ),
- .scl_o ( scl_pad_o ),
- .scl_oen ( scl_padoen_o ),
- .sda_i ( sda_pad_i ),
- .sda_o ( sda_pad_o ),
- .sda_oen ( sda_padoen_o )
+ .clk ( wb_clk_i ),
+ .sresetn ( sresetn ),
+ .aresetn ( aresetn ),
+ .ena ( core_en ),
+ .clk_cnt ( prer ),
+ .start ( sta ),
+ .stop ( sto ),
+ .read ( rd ),
+ .write ( wr ),
+ .ack_in ( ack ),
+ .din ( txr ),
+ .cmd_ack ( done ),
+ .ack_out ( irxack ),
+ .dout ( rxr ),
+ .i2c_busy ( i2c_busy ),
+ .i2c_fsm_busy ( i2c_fsm_busy ),
+ .i2c_al ( i2c_al ),
+ .scl_i ( scl_pad_i ),
+ .scl_o ( scl_pad_o ),
+ .scl_oen ( scl_padoen_o ),
+ .sda_i ( sda_pad_i ),
+ .sda_o ( sda_pad_o ),
+ .sda_oen ( sda_padoen_o )
);
// status register block + interrupt request signal
@@ -273,7 +277,8 @@
assign sr[7] = rxack;
assign sr[6] = i2c_busy;
assign sr[5] = al;
- assign sr[4:2] = 3'h0; // reserved
+ assign sr[4] = i2c_fsm_busy; // I2C FSM Busy
+ assign sr[3:2] = 2'h0; // reserved
assign sr[1] = tip;
assign sr[0] = irq_flag;
diff --git a/verilog/rtl/lib/clk_div8.v b/verilog/rtl/lib/clk_div8.v
new file mode 100644
index 0000000..d4731b7
--- /dev/null
+++ b/verilog/rtl/lib/clk_div8.v
@@ -0,0 +1,62 @@
+//////////////////////////////////////////////////////////////////////////////
+// SPDX-FileCopyrightText: 2021 , Dinesh Annayya
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+// SPDX-FileContributor: Created by Dinesh Annayya <dinesh.annayya@gmail.com>
+////////////////////////////////////////////////////////////////////////
+
+// #################################################################
+// Module: clock div by 2,4,8 supported
+//
+//
+//
+// #################################################################
+
+
+module clk_div8 (
+ // Outputs
+ output logic clk_div_8,
+ output logic clk_div_4,
+ output logic clk_div_2,
+ // Inputs
+ input logic mclk,
+ input logic reset_n
+ );
+
+
+
+
+//------------------------------------
+// Clock Divide func is done here
+//------------------------------------
+reg [2:0] clk_cnt ; // high level counter
+
+
+assign clk_div_2 = clk_cnt[0];
+assign clk_div_4 = clk_cnt[1];
+assign clk_div_8 = clk_cnt[2];
+
+always @ (posedge mclk or negedge reset_n)
+begin // {
+ if(reset_n == 1'b0)
+ begin
+ clk_cnt <= 'h0;
+ end else begin
+ clk_cnt <= clk_cnt + 1;
+ end // }
+end // }
+
+
+endmodule
+
diff --git a/verilog/rtl/lib/ctech_cells.sv b/verilog/rtl/lib/ctech_cells.sv
index bd34f11..26e5cbb 100644
--- a/verilog/rtl/lib/ctech_cells.sv
+++ b/verilog/rtl/lib/ctech_cells.sv
@@ -118,3 +118,22 @@
`endif
endmodule
+
+module ctech_clk_gate (
+ input logic GATE ,
+ input logic CLK ,
+ output logic GCLK
+ );
+
+`ifndef SYNTHESIS
+ assign GCLK = CLK & GATE;
+`else
+ sky130_fd_sc_hd__dlclkp_2 u_gate(
+ .GATE (GATE ),
+ .CLK (CLK ),
+ .GCLK (GCLK )
+ );
+`endif
+
+endmodule
+
diff --git a/verilog/rtl/lib/registers.v b/verilog/rtl/lib/registers.v
index b9a093e..ef5d356 100755
--- a/verilog/rtl/lib/registers.v
+++ b/verilog/rtl/lib/registers.v
@@ -366,3 +366,45 @@
endmodule
+
+/*********************************************************************
+ module: generic 32b register
+***********************************************************************/
+module gen_32b_reg2 (
+ //List of Inputs
+ rst_in,
+ cs,
+ we,
+ data_in,
+ reset_n,
+ clk,
+
+ //List of Outs
+ data_out
+ );
+
+ input [31:0] rst_in;
+ input [3:0] we;
+ input cs;
+ input [31:0] data_in;
+ input reset_n;
+ input clk;
+ output [31:0] data_out;
+
+
+ reg [31:0] data_out;
+
+always @ (posedge clk) begin
+ if (reset_n == 1'b0) begin
+ data_out <= rst_in ;
+ end
+ else begin
+ if(cs && we[0]) data_out[7:0] <= data_in[7:0];
+ if(cs && we[1]) data_out[15:8] <= data_in[15:8];
+ if(cs && we[2]) data_out[23:16] <= data_in[23:16];
+ if(cs && we[3]) data_out[31:24] <= data_in[31:24];
+ end
+end
+
+
+endmodule
diff --git a/verilog/rtl/pinmux/src/glbl_reg.sv b/verilog/rtl/pinmux/src/glbl_reg.sv
index d91ff4e..bb52a2b 100644
--- a/verilog/rtl/pinmux/src/glbl_reg.sv
+++ b/verilog/rtl/pinmux/src/glbl_reg.sv
@@ -34,13 +34,34 @@
//// Revision : ////
//// 0.1 - 16th Feb 2021, Dinesh A ////
//// initial version ////
+//// 0.2 - 28th Aug 2022, Dinesh A ////
+//// Additional Mail Box Register added at addr 0xF ////
//////////////////////////////////////////////////////////////////////
//
+`include "user_params.svh"
+
module glbl_reg (
// System Signals
// Inputs
input logic mclk ,
- input logic h_reset_n ,
+ input logic e_reset_n , // external reset
+ input logic p_reset_n , // power-on reset
+ input logic s_reset_n , // soft reset
+
+ input logic [15:0] pad_strap_in , // strap from pad
+
+ input logic user_clock1 ,
+ input logic user_clock2 ,
+ input logic int_pll_clock ,
+ input logic xtal_clk ,
+
+ output logic usb_clk ,
+ output logic rtc_clk ,
+
+ // to/from Global Reset FSM
+ input logic [31:0] system_strap ,
+ output logic [31:0] strap_sticky ,
+
// Global Reset control
output logic [1:0] cpu_core_rst_n ,
@@ -54,7 +75,7 @@
// Reg Bus Interface Signal
input logic reg_cs ,
input logic reg_wr ,
- input logic [3:0] reg_addr ,
+ input logic [4:0] reg_addr ,
input logic [31:0] reg_wdata ,
input logic [3:0] reg_be ,
@@ -65,7 +86,7 @@
input logic [1:0] ext_intr_in ,
// Risc configuration
- output logic [15:0] irq_lines ,
+ output logic [31:0] irq_lines ,
output logic soft_irq ,
output logic [2:0] user_irq ,
input logic usb_intr ,
@@ -76,7 +97,7 @@
input logic [2:0] timer_intr ,
- input logic gpio_intr
+ input logic [31:0] gpio_intr
);
@@ -85,6 +106,7 @@
// Internal Wire Declarations
//-----------------------------------------------------------------------
+logic [15:0] strap_latch ;
logic sw_rd_en ;
logic sw_wr_en;
logic [4:0] sw_addr; // addressing 16 registers
@@ -92,19 +114,39 @@
logic [3:0] wr_be ;
logic [31:0] reg_out;
-logic [31:0] reg_0; // Chip ID
-logic [31:0] reg_1; // Global Reg-0
-logic [31:0] reg_2; // Global Reg-1
-logic [31:0] reg_3; // Global Interrupt Mask
-logic [31:0] reg_4; // Global Interrupt Status
-logic [31:0] reg_5; // Multi Function Sel
-logic [31:0] reg_6; // Software Reg-0
-logic [31:0] reg_7; // Software Reg-1
-logic [31:0] reg_8; // Software Reg-2
-logic [31:0] reg_9; // Software Reg-3
-logic [31:0] reg_10; // Software Reg-4
-logic [31:0] reg_11; // Software Reg-5
+logic [31:0] reg_0; // Chip ID
+logic [31:0] reg_1; // Global Reg-0
+logic [31:0] reg_2; // Global Reg-1
+logic [31:0] reg_3; // Global Interrupt Mask
+logic [31:0] reg_4; // Global Interrupt Status
+logic [31:0] reg_5; // Multi Function Sel
+logic [31:0] reg_6; //
+logic [31:0] reg_7; //
+logic [31:0] reg_8; //
+logic [31:0] reg_9; //
+logic [31:0] reg_10; //
+logic [31:0] reg_11; //
+logic [31:0] reg_12; // Latched Strap
+logic [31:0] reg_13; // Strap Sticky
+logic [31:0] reg_14; // System Strap
+logic [31:0] reg_15; // MailBox Reg
+logic [31:0] reg_16; // Software Reg-0 - p_reset
+logic [31:0] reg_17; // Software Reg-1 - p_reset
+logic [31:0] reg_18; // Software Reg-2 - p_reset
+logic [31:0] reg_19; // Software Reg-3 - p_reset
+logic [31:0] reg_20; // Software Reg-4 - s_reset
+logic [31:0] reg_21; // Software Reg-5 - s_reset
+logic [31:0] reg_22; // Software Reg-6 - s_reset
+logic [31:0] reg_23; // Software Reg-7 - s_reset
+logic [31:0] reg_24; // Reserved
+logic [31:0] reg_25; // Reserved
+logic [31:0] reg_26; // Reserved
+logic [31:0] reg_27; // Reserved
+logic [31:0] reg_28; // Reserved
+logic [31:0] reg_29; // Reserved
+logic [31:0] reg_30; // Reserved
+logic [31:0] reg_31; // Reserved
logic cs_int;
@@ -116,9 +158,9 @@
assign sw_reg_wdata = reg_wdata;
-always @ (posedge mclk or negedge h_reset_n)
+always @ (posedge mclk or negedge s_reset_n)
begin : preg_out_Seq
- if (h_reset_n == 1'b0) begin
+ if (s_reset_n == 1'b0) begin
reg_rdata <= 'h0;
reg_ack <= 1'b0;
end else if (reg_cs && !reg_ack) begin
@@ -134,32 +176,71 @@
//-----------------------------------------------------------------------
// register read enable and write enable decoding logic
//-----------------------------------------------------------------------
-wire sw_wr_en_0 = sw_wr_en & (sw_addr == 4'h0);
-wire sw_wr_en_1 = sw_wr_en & (sw_addr == 4'h1);
-wire sw_wr_en_2 = sw_wr_en & (sw_addr == 4'h2);
-wire sw_wr_en_3 = sw_wr_en & (sw_addr == 4'h3);
-wire sw_wr_en_4 = sw_wr_en & (sw_addr == 4'h4);
-wire sw_wr_en_5 = sw_wr_en & (sw_addr == 4'h5);
-wire sw_wr_en_6 = sw_wr_en & (sw_addr == 4'h6);
-wire sw_wr_en_7 = sw_wr_en & (sw_addr == 4'h7);
-wire sw_wr_en_8 = sw_wr_en & (sw_addr == 4'h8);
-wire sw_wr_en_9 = sw_wr_en & (sw_addr == 4'h9);
-wire sw_wr_en_10 = sw_wr_en & (sw_addr == 4'hA);
-wire sw_wr_en_11 = sw_wr_en & (sw_addr == 4'hB);
+wire sw_wr_en_0 = sw_wr_en & (sw_addr == 5'h0);
+wire sw_wr_en_1 = sw_wr_en & (sw_addr == 5'h1);
+wire sw_wr_en_2 = sw_wr_en & (sw_addr == 5'h2);
+wire sw_wr_en_3 = sw_wr_en & (sw_addr == 5'h3);
+wire sw_wr_en_4 = sw_wr_en & (sw_addr == 5'h4);
+wire sw_wr_en_5 = sw_wr_en & (sw_addr == 5'h5);
+wire sw_wr_en_6 = sw_wr_en & (sw_addr == 5'h6);
+wire sw_wr_en_7 = sw_wr_en & (sw_addr == 5'h7);
+wire sw_wr_en_8 = sw_wr_en & (sw_addr == 5'h8);
+wire sw_wr_en_9 = sw_wr_en & (sw_addr == 5'h9);
+wire sw_wr_en_10 = sw_wr_en & (sw_addr == 5'hA);
+wire sw_wr_en_11 = sw_wr_en & (sw_addr == 5'hB);
+wire sw_wr_en_12 = sw_wr_en & (sw_addr == 5'hC);
+wire sw_wr_en_13 = sw_wr_en & (sw_addr == 5'hD);
+wire sw_wr_en_14 = sw_wr_en & (sw_addr == 5'hE);
+wire sw_wr_en_15 = sw_wr_en & (sw_addr == 5'hF);
+wire sw_wr_en_16 = sw_wr_en & (sw_addr == 5'h10);
+wire sw_wr_en_17 = sw_wr_en & (sw_addr == 5'h11);
+wire sw_wr_en_18 = sw_wr_en & (sw_addr == 5'h12);
+wire sw_wr_en_19 = sw_wr_en & (sw_addr == 5'h13);
+wire sw_wr_en_20 = sw_wr_en & (sw_addr == 5'h14);
+wire sw_wr_en_21 = sw_wr_en & (sw_addr == 5'h15);
+wire sw_wr_en_22 = sw_wr_en & (sw_addr == 5'h16);
+wire sw_wr_en_23 = sw_wr_en & (sw_addr == 5'h17);
+wire sw_wr_en_24 = sw_wr_en & (sw_addr == 5'h18);
+wire sw_wr_en_25 = sw_wr_en & (sw_addr == 5'h19);
+wire sw_wr_en_26 = sw_wr_en & (sw_addr == 5'h1A);
+wire sw_wr_en_27 = sw_wr_en & (sw_addr == 5'h1B);
+wire sw_wr_en_28 = sw_wr_en & (sw_addr == 5'h1C);
+wire sw_wr_en_29 = sw_wr_en & (sw_addr == 5'h1D);
+wire sw_wr_en_30 = sw_wr_en & (sw_addr == 5'h1E);
+wire sw_wr_en_31 = sw_wr_en & (sw_addr == 5'h1F);
-
-wire sw_rd_en_0 = sw_rd_en & (sw_addr == 4'h0);
-wire sw_rd_en_1 = sw_rd_en & (sw_addr == 4'h1);
-wire sw_rd_en_2 = sw_rd_en & (sw_addr == 4'h2);
-wire sw_rd_en_3 = sw_rd_en & (sw_addr == 4'h3);
-wire sw_rd_en_4 = sw_rd_en & (sw_addr == 4'h4);
-wire sw_rd_en_5 = sw_rd_en & (sw_addr == 4'h5);
-wire sw_rd_en_6 = sw_rd_en & (sw_addr == 4'h6);
-wire sw_rd_en_7 = sw_rd_en & (sw_addr == 4'h7);
-wire sw_rd_en_8 = sw_rd_en & (sw_addr == 4'h8);
-wire sw_rd_en_9 = sw_rd_en & (sw_addr == 4'h9);
-wire sw_rd_en_10 = sw_rd_en & (sw_addr == 4'hA);
-wire sw_rd_en_11 = sw_rd_en & (sw_addr == 4'hB);
+wire sw_rd_en_0 = sw_rd_en & (sw_addr == 5'h0);
+wire sw_rd_en_1 = sw_rd_en & (sw_addr == 5'h1);
+wire sw_rd_en_2 = sw_rd_en & (sw_addr == 5'h2);
+wire sw_rd_en_3 = sw_rd_en & (sw_addr == 5'h3);
+wire sw_rd_en_4 = sw_rd_en & (sw_addr == 5'h4);
+wire sw_rd_en_5 = sw_rd_en & (sw_addr == 5'h5);
+wire sw_rd_en_6 = sw_rd_en & (sw_addr == 5'h6);
+wire sw_rd_en_7 = sw_rd_en & (sw_addr == 5'h7);
+wire sw_rd_en_8 = sw_rd_en & (sw_addr == 5'h8);
+wire sw_rd_en_9 = sw_rd_en & (sw_addr == 5'h9);
+wire sw_rd_en_10 = sw_rd_en & (sw_addr == 5'hA);
+wire sw_rd_en_11 = sw_rd_en & (sw_addr == 5'hB);
+wire sw_rd_en_12 = sw_rd_en & (sw_addr == 5'hC);
+wire sw_rd_en_13 = sw_rd_en & (sw_addr == 5'hD);
+wire sw_rd_en_14 = sw_rd_en & (sw_addr == 5'hE);
+wire sw_rd_en_15 = sw_rd_en & (sw_addr == 5'hF);
+wire sw_rd_en_16 = sw_rd_en & (sw_addr == 5'h10);
+wire sw_rd_en_17 = sw_rd_en & (sw_addr == 5'h11);
+wire sw_rd_en_18 = sw_rd_en & (sw_addr == 5'h12);
+wire sw_rd_en_19 = sw_rd_en & (sw_addr == 5'h13);
+wire sw_rd_en_20 = sw_rd_en & (sw_addr == 5'h14);
+wire sw_rd_en_21 = sw_rd_en & (sw_addr == 5'h15);
+wire sw_rd_en_22 = sw_rd_en & (sw_addr == 5'h16);
+wire sw_rd_en_23 = sw_rd_en & (sw_addr == 5'h17);
+wire sw_rd_en_24 = sw_rd_en & (sw_addr == 5'h18);
+wire sw_rd_en_25 = sw_rd_en & (sw_addr == 5'h19);
+wire sw_rd_en_26 = sw_rd_en & (sw_addr == 5'h1A);
+wire sw_rd_en_27 = sw_rd_en & (sw_addr == 5'h1B);
+wire sw_rd_en_28 = sw_rd_en & (sw_addr == 5'h1C);
+wire sw_rd_en_29 = sw_rd_en & (sw_addr == 5'h1D);
+wire sw_rd_en_30 = sw_rd_en & (sw_addr == 5'h1E);
+wire sw_rd_en_31 = sw_rd_en & (sw_addr == 5'h1F);
//-----------------------------------------------------------------------
// Individual register assignments
@@ -187,22 +268,35 @@
//------------------------------------------
// reg-1: GLBL_CFG_0
//------------------------------------------
-wire [31:0] cfg_glb_ctrl = reg_1;
+wire [31:0] cfg_rst_ctrl = reg_1;
-ctech_buf u_buf_cpu_intf_rst (.A(cfg_glb_ctrl[0]),.X(cpu_intf_rst_n));
-ctech_buf u_buf_qspim_rst (.A(cfg_glb_ctrl[1]),.X(qspim_rst_n));
-ctech_buf u_buf_sspim_rst (.A(cfg_glb_ctrl[2]),.X(sspim_rst_n));
-ctech_buf u_buf_uart0_rst (.A(cfg_glb_ctrl[3]),.X(uart_rst_n[0]));
-ctech_buf u_buf_i2cm_rst (.A(cfg_glb_ctrl[4]),.X(i2cm_rst_n));
-ctech_buf u_buf_usb_rst (.A(cfg_glb_ctrl[5]),.X(usb_rst_n));
-ctech_buf u_buf_uart1_rst (.A(cfg_glb_ctrl[6]),.X(uart_rst_n[1]));
+ctech_buf u_buf_cpu_intf_rst (.A(cfg_rst_ctrl[0]),.X(cpu_intf_rst_n));
+ctech_buf u_buf_qspim_rst (.A(cfg_rst_ctrl[1]),.X(qspim_rst_n));
+ctech_buf u_buf_sspim_rst (.A(cfg_rst_ctrl[2]),.X(sspim_rst_n));
+ctech_buf u_buf_uart0_rst (.A(cfg_rst_ctrl[3]),.X(uart_rst_n[0]));
+ctech_buf u_buf_i2cm_rst (.A(cfg_rst_ctrl[4]),.X(i2cm_rst_n));
+ctech_buf u_buf_usb_rst (.A(cfg_rst_ctrl[5]),.X(usb_rst_n));
+ctech_buf u_buf_uart1_rst (.A(cfg_rst_ctrl[6]),.X(uart_rst_n[1]));
-ctech_buf u_buf_cpu0_rst (.A(cfg_glb_ctrl[8]),.X(cpu_core_rst_n[0]));
-ctech_buf u_buf_cpu1_rst (.A(cfg_glb_ctrl[9]),.X(cpu_core_rst_n[1]));
+ctech_buf u_buf_cpu0_rst (.A(cfg_rst_ctrl[8]),.X(cpu_core_rst_n[0]));
+ctech_buf u_buf_cpu1_rst (.A(cfg_rst_ctrl[9]),.X(cpu_core_rst_n[1]));
-gen_32b_reg #(32'h0) u_reg_1 (
+//---------------------------------------------------------
+// Default reset value decided based on riscv boot mode
+//
+// bit [12] - Riscv Reset control
+// 0 - Keep Riscv on Reset
+// 1 - Removed Riscv on Power On Reset
+// Default cpu_intf_rst_n & qspim_rst_n reset is removed
+//---------------------------------------------------------
+wire strap_riscv_bmode = system_strap[`STRAP_RISCV_RESET_MODE];
+wire [31:0] rst_in = (strap_riscv_bmode) ? 32'h103 : 32'h03;
+
+glbl_rst_reg #(32'h0) u_reg_1 (
//List of Inputs
- .reset_n (h_reset_n ),
+ .e_reset_n (e_reset_n ),
+ .s_reset_n (s_reset_n ),
+ .rst_in (rst_in ),
.clk (mclk ),
.cs (sw_wr_en_1 ),
.we (wr_be ),
@@ -216,9 +310,21 @@
// reg-2: GLBL_CFG_1
//------------------------------------------
-gen_32b_reg #(32'h0) u_reg_2 (
+wire [31:0] reg_2_rst_val = {4'h0,
+ system_strap[`STRAP_RISCV_CACHE_BYPASS],
+ system_strap[`STRAP_RISCV_CACHE_BYPASS],
+ 2'b0,
+ 1'b0,
+ 3'b0,
+ system_strap[`STRAP_RISCV_SRAM_CLK_EDGE],
+ system_strap[`STRAP_RISCV_SRAM_CLK_EDGE],
+ system_strap[`STRAP_RISCV_SRAM_CLK_EDGE],
+ system_strap[`STRAP_RISCV_SRAM_CLK_EDGE],
+ 16'h0};
+gen_32b_reg2 u_reg_2 (
//List of Inputs
- .reset_n (h_reset_n ),
+ .reset_n (s_reset_n ),
+ .rst_in (reg_2_rst_val ),
.clk (mclk ),
.cs (sw_wr_en_2 ),
.we (wr_be ),
@@ -228,7 +334,9 @@
.data_out (reg_2 )
);
-assign cfg_riscv_ctrl = reg_2[31:16];
+assign soft_irq = reg_2[3];
+assign user_irq = reg_2[2:0];
+assign cfg_riscv_ctrl = reg_2[31:16];
//-----------------------------------------------------------------------
// reg-3 : Global Interrupt Mask
@@ -236,7 +344,7 @@
gen_32b_reg #(32'h0) u_reg_3 (
//List of Inputs
- .reset_n (h_reset_n ),
+ .reset_n (s_reset_n ),
.clk (mclk ),
.cs (sw_wr_en_3 ),
.we (wr_be ),
@@ -249,53 +357,29 @@
//-----------------------------------------------------------------------
// reg-4 : Global Interrupt Status
//-----------------------------------------------------------------
-assign irq_lines = reg_3[15:0] & reg_4[15:0];
-assign soft_irq = reg_3[16] & reg_4[16];
-assign user_irq = reg_3[19:17]& reg_4[19:17];
+assign irq_lines = reg_3[31:0] & reg_4[31:0];
+// In Arduino GPIO[7:0] is corresponds to PORT-A which is not available for user access
+wire [31:0] hware_intr_req = {gpio_intr[31:8], 3'b0,usb_intr, i2cm_intr,timer_intr[2:0]};
-generic_register #(8,0 ) u_reg4_be0 (
- .we ({8{sw_wr_en_4 &
- wr_be[0] }} ),
- .data_in (sw_reg_wdata[7:0] ),
- .reset_n (h_reset_n ),
- .clk (mclk ),
-
- //List of Outs
- .data_out (reg_4[7:0] )
- );
-
-
-wire [7:0] hware_intr_req = {gpio_intr, ext_intr_in[1:0], usb_intr, i2cm_intr,timer_intr[2:0]};
-
-generic_intr_stat_reg #(.WD(8),
- .RESET_DEFAULT(0)) u_reg4_be1 (
+generic_intr_stat_reg #(.WD(32),
+ .RESET_DEFAULT(0)) u_reg4 (
//inputs
.clk (mclk ),
- .reset_n (h_reset_n ),
- .reg_we ({8{sw_wr_en_4 & reg_ack &
- wr_be[1] }} ),
- .reg_din (sw_reg_wdata[15:8] ),
+ .reset_n (s_reset_n ),
+ .reg_we ({{8{sw_wr_en_4 & reg_ack & wr_be[3]}},
+ {8{sw_wr_en_4 & reg_ack & wr_be[2]}},
+ {8{sw_wr_en_4 & reg_ack & wr_be[1]}},
+ {8{sw_wr_en_4 & reg_ack & wr_be[0]}}}),
+ .reg_din (sw_reg_wdata[31:0] ),
.hware_req (hware_intr_req ),
//outputs
- .data_out (reg_4[15:8] )
+ .data_out (reg_4[31:0] )
);
-generic_register #(4,0 ) u_reg4_be2 (
- .we ({4{sw_wr_en_4 &
- wr_be[2] }} ),
- .data_in (sw_reg_wdata[19:16]),
- .reset_n (h_reset_n ),
- .clk (mclk ),
-
- //List of Outs
- .data_out (reg_4[19:16] )
- );
-
-assign reg_4[31:20] = '0;
//-----------------------------------------------------------------------
@@ -303,10 +387,11 @@
//-----------------------------------------------------------------------
assign cfg_multi_func_sel = reg_5[31:0]; // to be used for read
+// bit[31] '1' - uart master enable on power up
-gen_32b_reg #(32'h0) u_reg_5 (
+gen_32b_reg #(32'h8000_0000) u_reg_5 (
//List of Inputs
- .reset_n (h_reset_n ),
+ .reset_n (s_reset_n ),
.clk (mclk ),
.cs (sw_wr_en_5 ),
.we (wr_be ),
@@ -316,98 +401,186 @@
.data_out (reg_5 )
);
+
//-----------------------------------------
-// Software Reg-0 : ASCI Representation of RISC = 32'h8273_8343
+// Reg-6: Clock Control
// ----------------------------------------
-gen_32b_reg #(32'h8273_8343) u_reg_6 (
+gen_32b_reg #(32'h0) u_reg_6 (
//List of Inputs
- .reset_n (h_reset_n ),
+ .reset_n (s_reset_n ),
.clk (mclk ),
- .cs (sw_wr_en_6 ),
+ .cs (sw_wr_en_6 ),
.we (wr_be ),
.data_in (sw_reg_wdata ),
//List of Outs
.data_out (reg_6 )
);
+wire [7:0] cfg_rtc_clk_ctrl = reg_6[7:0];
+wire [7:0] cfg_usb_clk_ctrl = reg_6[15:8];
+
+
+//-------------------------------------------------
+// Strap control
+//---------------------------------------------
+strap_ctrl u_strap (
+ .clk (mclk ),
+ .e_reset_n (e_reset_n ), // external reset
+ .p_reset_n (p_reset_n ), // power-on reset
+ .s_reset_n (s_reset_n ), // soft reset
+
+ .pad_strap_in (pad_strap_in), // strap from pad
+ //List of Inputs
+ .cs (sw_wr_en_13 ),
+ .we (wr_be ),
+ .data_in (sw_reg_wdata),
+
+ //List of Outs
+ .strap_latch (strap_latch ),
+ .strap_sticky (strap_sticky)
+ );
+
+
+assign reg_12 = {16'h0,strap_latch};
+assign reg_13 = strap_sticky;
+assign reg_14 = system_strap;
+
+//-----------------------------------------
+// MailBox Register
+// ----------------------------------------
+gen_32b_reg #(32'h0) u_reg_15 (
+ //List of Inputs
+ .reset_n (s_reset_n ),
+ .clk (mclk ),
+ .cs (sw_wr_en_15 ),
+ .we (wr_be ),
+ .data_in (sw_reg_wdata ),
+
+ //List of Outs
+ .data_out (reg_15 )
+ );
+
+
+
+//-----------------------------------------
+// Software Reg-0 : ASCI Representation of RISC = 32'h8273_8343
+// ----------------------------------------
+gen_32b_reg #(CHIP_SIGNATURE) u_reg_16 (
+ //List of Inputs
+ .reset_n (p_reset_n ),
+ .clk (mclk ),
+ .cs (sw_wr_en_16 ),
+ .we (wr_be ),
+ .data_in (sw_reg_wdata ),
+
+ //List of Outs
+ .data_out (reg_16 )
+ );
//-----------------------------------------
// Software Reg-1, Release date: <DAY><MONTH><YEAR>
// ----------------------------------------
-gen_32b_reg #(32'h1508_2022) u_reg_7 (
+gen_32b_reg #(CHIP_RELEASE_DATE) u_reg_17 (
//List of Inputs
- .reset_n (h_reset_n ),
+ .reset_n (p_reset_n ),
.clk (mclk ),
- .cs (sw_wr_en_7 ),
+ .cs (sw_wr_en_17 ),
.we (wr_be ),
.data_in (sw_reg_wdata ),
//List of Outs
- .data_out (reg_7 )
+ .data_out (reg_17 )
);
//-----------------------------------------
-// Software Reg-2: Poject Revison 5.0 = 0005000
+// Software Reg-2: Poject Revison 5.1 = 0005200
// ----------------------------------------
-gen_32b_reg #(32'h0005_0000) u_reg_8 (
+gen_32b_reg #(CHIP_REVISION) u_reg_18 (
//List of Inputs
- .reset_n (h_reset_n ),
+ .reset_n (p_reset_n ),
.clk (mclk ),
- .cs (sw_wr_en_8 ),
+ .cs (sw_wr_en_18 ),
.we (wr_be ),
.data_in (sw_reg_wdata ),
//List of Outs
- .data_out (reg_8 )
+ .data_out (reg_18 )
);
//-----------------------------------------
// Software Reg-3
// ----------------------------------------
-gen_32b_reg #(32'h0) u_reg_9 (
+gen_32b_reg #(32'h0) u_reg_19 (
//List of Inputs
- .reset_n (h_reset_n ),
+ .reset_n (s_reset_n ),
.clk (mclk ),
- .cs (sw_wr_en_9 ),
+ .cs (sw_wr_en_19 ),
.we (wr_be ),
.data_in (sw_reg_wdata ),
//List of Outs
- .data_out (reg_9 )
+ .data_out (reg_19 )
);
//-----------------------------------------
// Software Reg-4
// ----------------------------------------
-gen_32b_reg #(32'h0) u_reg_10 (
+gen_32b_reg #(32'h0) u_reg_20 (
//List of Inputs
- .reset_n (h_reset_n ),
+ .reset_n (s_reset_n ),
.clk (mclk ),
- .cs (sw_wr_en_10 ),
+ .cs (sw_wr_en_20 ),
.we (wr_be ),
.data_in (sw_reg_wdata ),
//List of Outs
- .data_out (reg_10 )
+ .data_out (reg_20 )
);
//-----------------------------------------
// Software Reg-5
// ----------------------------------------
-gen_32b_reg #(32'h0) u_reg_11 (
+gen_32b_reg #(32'h0) u_reg_21 (
//List of Inputs
- .reset_n (h_reset_n ),
+ .reset_n (s_reset_n ),
.clk (mclk ),
- .cs (sw_wr_en_11 ),
+ .cs (sw_wr_en_21 ),
.we (wr_be ),
.data_in (sw_reg_wdata ),
//List of Outs
- .data_out (reg_11 )
+ .data_out (reg_21 )
);
+//-----------------------------------------
+// Software Reg-6:
+// ----------------------------------------
+gen_32b_reg #(32'h0) u_reg_22 (
+ //List of Inputs
+ .reset_n (s_reset_n ),
+ .clk (mclk ),
+ .cs (sw_wr_en_22 ),
+ .we (wr_be ),
+ .data_in (sw_reg_wdata ),
+
+ //List of Outs
+ .data_out (reg_22 )
+ );
-
+//-----------------------------------------
+// Software Reg-7
+// ----------------------------------------
+gen_32b_reg #(32'h0) u_reg_23 (
+ //List of Inputs
+ .reset_n (s_reset_n ),
+ .clk (mclk ),
+ .cs (sw_wr_en_23 ),
+ .we (wr_be ),
+ .data_in (sw_reg_wdata ),
+
+ //List of Outs
+ .data_out (reg_23 )
+ );
//-----------------------------------------------------------------------
// Register Read Path Multiplexer instantiation
//-----------------------------------------------------------------------
@@ -416,22 +589,104 @@
begin
reg_out [31:0] = 32'h0;
- case (sw_addr [3:0])
- 4'b0000 : reg_out [31:0] = reg_0 [31:0];
- 4'b0001 : reg_out [31:0] = reg_1 [31:0];
- 4'b0010 : reg_out [31:0] = reg_2 [31:0];
- 4'b0011 : reg_out [31:0] = reg_3 [31:0];
- 4'b0100 : reg_out [31:0] = reg_4 [31:0];
- 4'b0101 : reg_out [31:0] = reg_5 [31:0];
- 4'b0110 : reg_out [31:0] = reg_6 [31:0];
- 4'b0111 : reg_out [31:0] = reg_7 [31:0];
- 4'b1000 : reg_out [31:0] = reg_8 [31:0];
- 4'b1001 : reg_out [31:0] = reg_9 [31:0];
- 4'b1010 : reg_out [31:0] = reg_10 [31:0];
- 4'b1011 : reg_out [31:0] = reg_11 [31:0];
+ case (sw_addr [4:0])
+ 5'b00000 : reg_out [31:0] = reg_0 ;
+ 5'b00001 : reg_out [31:0] = reg_1 ;
+ 5'b00010 : reg_out [31:0] = reg_2 ;
+ 5'b00011 : reg_out [31:0] = reg_3 ;
+ 5'b00100 : reg_out [31:0] = reg_4 ;
+ 5'b00101 : reg_out [31:0] = reg_5 ;
+ 5'b00110 : reg_out [31:0] = reg_6 ;
+ 5'b00111 : reg_out [31:0] = reg_7 ;
+ 5'b01000 : reg_out [31:0] = reg_8 ;
+ 5'b01001 : reg_out [31:0] = reg_9 ;
+ 5'b01010 : reg_out [31:0] = reg_10 ;
+ 5'b01011 : reg_out [31:0] = reg_11 ;
+ 5'b01100 : reg_out [31:0] = reg_12 ;
+ 5'b01101 : reg_out [31:0] = reg_13 ;
+ 5'b01110 : reg_out [31:0] = reg_14 ;
+ 5'b01111 : reg_out [31:0] = reg_15 ;
+ 5'b10000 : reg_out [31:0] = reg_16 ;
+ 5'b10001 : reg_out [31:0] = reg_17 ;
+ 5'b10010 : reg_out [31:0] = reg_18 ;
+ 5'b10011 : reg_out [31:0] = reg_19 ;
+ 5'b10100 : reg_out [31:0] = reg_20 ;
+ 5'b10101 : reg_out [31:0] = reg_21 ;
+ 5'b10110 : reg_out [31:0] = reg_22 ;
+ 5'b10111 : reg_out [31:0] = reg_23 ;
+ 5'b11000 : reg_out [31:0] = reg_24 ;
+ 5'b11001 : reg_out [31:0] = reg_25 ;
+ 5'b11010 : reg_out [31:0] = reg_26 ;
+ 5'b11011 : reg_out [31:0] = reg_27 ;
+ 5'b11100 : reg_out [31:0] = reg_28 ;
+ 5'b11101 : reg_out [31:0] = reg_29 ;
+ 5'b11110 : reg_out [31:0] = reg_30 ;
+ 5'b11111 : reg_out [31:0] = reg_31 ;
default : reg_out [31:0] = 32'h0;
endcase
end
+//----------------------------------
+// Generate RTC Clock Generation
+//----------------------------------
+wire rtc_clk_div;
+wire rtc_ref_clk_int;
+wire rtc_ref_clk;
+wire rtc_clk_int;
+
+wire [1:0] cfg_rtc_clk_sel_sel = cfg_rtc_clk_ctrl[7:6];
+wire cfg_rtc_clk_div = cfg_rtc_clk_ctrl[5];
+wire [4:0] cfg_rtc_clk_ratio = cfg_rtc_clk_ctrl[4:0];
+
+assign rtc_ref_clk_int = (cfg_rtc_clk_sel_sel ==2'b00) ? user_clock1 :
+ (cfg_rtc_clk_sel_sel ==2'b01) ? user_clock2 :
+ (cfg_rtc_clk_sel_sel ==2'b01) ? int_pll_clock : xtal_clk;
+ctech_clk_buf u_rtc_ref_clkbuf (.A (rtc_ref_clk_int), . X(rtc_ref_clk));
+//assign rtc_clk_int = (cfg_rtc_clk_div) ? rtc_clk_div : rtc_ref_clk;
+ctech_mux2x1 u_rtc_clk_sel (.A0 (rtc_ref_clk), .A1 (rtc_clk_div), .S (cfg_rtc_clk_div), .X (rtc_clk_int));
+
+
+ctech_clk_buf u_clkbuf_rtc (.A (rtc_clk_int), . X(rtc_clk));
+
+clk_ctl #(4) u_rtcclk (
+ // Outputs
+ .clk_o (rtc_clk_div ),
+ // Inputs
+ .mclk (rtc_ref_clk ),
+ .reset_n (s_reset_n ),
+ .clk_div_ratio (cfg_rtc_clk_ratio)
+ );
+
+//----------------------------------
+// Generate USB Clock Generation
+//----------------------------------
+wire usb_clk_div;
+wire usb_ref_clk_int;
+wire usb_ref_clk;
+wire usb_clk_int;
+
+wire [1:0] cfg_usb_clk_sel_sel = cfg_usb_clk_ctrl[7:6];
+wire cfg_usb_clk_div = cfg_usb_clk_ctrl[5];
+wire [4:0] cfg_usb_clk_ratio = cfg_usb_clk_ctrl[4:0];
+
+assign usb_ref_clk_int = (cfg_usb_clk_sel_sel ==2'b00) ? user_clock1 :
+ (cfg_usb_clk_sel_sel ==2'b01) ? user_clock2 :
+ (cfg_usb_clk_sel_sel ==2'b01) ? int_pll_clock : xtal_clk;
+ctech_clk_buf u_usb_ref_clkbuf (.A (usb_ref_clk_int), . X(usb_ref_clk));
+//assign usb_clk_int = (cfg_usb_clk_div) ? usb_clk_div : usb_ref_clk;
+ctech_mux2x1 u_usb_clk_sel (.A0 (usb_ref_clk), .A1 (usb_clk_div), .S (cfg_usb_clk_div), .X (usb_clk_int));
+
+
+ctech_clk_buf u_clkbuf_usb (.A (usb_clk_int), . X(usb_clk));
+
+clk_ctl #(4) u_usbclk (
+ // Outputs
+ .clk_o (usb_clk_div ),
+ // Inputs
+ .mclk (usb_ref_clk ),
+ .reset_n (s_reset_n ),
+ .clk_div_ratio (cfg_usb_clk_ratio)
+ );
+
endmodule
diff --git a/verilog/rtl/pinmux/src/glbl_rst_reg.sv b/verilog/rtl/pinmux/src/glbl_rst_reg.sv
new file mode 100644
index 0000000..cca7d0b
--- /dev/null
+++ b/verilog/rtl/pinmux/src/glbl_rst_reg.sv
@@ -0,0 +1,63 @@
+//////////////////////////////////////////////////////////////////////////////
+// SPDX-FileCopyrightText: 2021 , Dinesh Annayya
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+// SPDX-FileContributor: Created by Dinesh Annayya <dinesha@opencores.org>
+//
+//////////////////////////////////////////////////////////////////////
+
+/********************************************************************************
+ To handle reset removal on power up new logic is created,
+ One power up data_out will be reset value and one cycle later it will latch the rst_in.
+
+This will handle case when one of the bit of rst_n high, Still reset will be asserted in dataout
+and one cycle latter it will get updated
+**********************************************************************************/
+
+module glbl_rst_reg (
+ input logic e_reset_n,
+ input logic s_reset_n,
+ //List of Inputs
+ input logic [31:0] rst_in,
+ input logic cs,
+ input logic [3:0] we,
+ input logic [31:0] data_in,
+ input logic clk,
+
+ //List of Outs
+ output logic [31:0]data_out
+ );
+
+ parameter RESET_DEFAULT = 32'h0;
+
+logic [31:0] data_out_l;
+
+always @ (posedge clk or negedge e_reset_n) begin
+ if (e_reset_n == 1'b0) begin
+ data_out <= RESET_DEFAULT ;
+ data_out_l <= 'h0 ;
+ end else if (s_reset_n == 1'b0) begin
+ data_out <= RESET_DEFAULT ;
+ data_out_l <= rst_in ;
+ end else begin
+ data_out <= data_out_l;
+ if(cs && we[0]) data_out_l[7:0] <= data_in[7:0];
+ if(cs && we[1]) data_out_l[15:8] <= data_in[15:8];
+ if(cs && we[2]) data_out_l[23:16] <= data_in[23:16];
+ if(cs && we[3]) data_out_l[31:24] <= data_in[31:24];
+ end
+end
+
+
+endmodule
diff --git a/verilog/rtl/pinmux/src/gpio_reg.sv b/verilog/rtl/pinmux/src/gpio_reg.sv
index be61923..10b90bd 100644
--- a/verilog/rtl/pinmux/src/gpio_reg.sv
+++ b/verilog/rtl/pinmux/src/gpio_reg.sv
@@ -58,13 +58,13 @@
input logic [31:0] gpio_int_event ,
output logic [31:0] cfg_gpio_out_data ,// GPIO statuc O/P data from config reg
output logic [31:0] cfg_gpio_dir_sel ,// decides on GPIO pin is I/P or O/P at pad level, 0 -> Input, 1 -> Output
- output logic [31:0] cfg_gpio_out_type ,// GPIO Type, Unused
+ output logic [31:0] cfg_gpio_out_type ,// GPIO Type, 1 - WS_281X port
output logic [31:0] cfg_multi_func_sel ,// GPIO Multi function type
output logic [31:0] cfg_gpio_posedge_int_sel ,// select posedge interrupt
output logic [31:0] cfg_gpio_negedge_int_sel ,// select negedge interrupt
output logic [31:00] cfg_gpio_data_in ,
- output logic gpio_intr
+ output logic [31:0] gpio_intr
);
@@ -253,7 +253,7 @@
//-----------------------------------------------------------------------
wire [31:0] cfg_gpio_int_mask = reg_6[31:0]; // to be used for read
-assign gpio_intr = ( | (reg_4 & reg_6) ); // interrupt pin to the RISC
+assign gpio_intr = reg_4 & reg_6; // interrupt pin to the RISC
// Register-11
diff --git a/verilog/rtl/pinmux/src/gpio_top.sv b/verilog/rtl/pinmux/src/gpio_top.sv
index 0a7fd02..097623f 100644
--- a/verilog/rtl/pinmux/src/gpio_top.sv
+++ b/verilog/rtl/pinmux/src/gpio_top.sv
@@ -52,19 +52,19 @@
// Outputs
output logic [31:0] reg_rdata,
output logic reg_ack,
-
+
+ output logic [31:0] cfg_gpio_out_type ,// GPIO Type, 1 - ws281x
output logic [31:0] cfg_gpio_dir_sel,
input logic [31:0] pad_gpio_in,
output logic [31:0] pad_gpio_out,
- output logic gpio_intr
+ output logic [31:0] gpio_intr
);
logic [31:0] gpio_prev_indata ;// previously captured GPIO I/P pins data
logic [31:0] cfg_gpio_out_data ;// GPIO statuc O/P data from config reg
-logic [31:0] cfg_gpio_out_type ;// GPIO Type, Unused
logic [31:0] cfg_multi_func_sel ;// GPIO Multi function type
logic [31:0] cfg_gpio_posedge_int_sel ;// select posedge interrupt
logic [31:0] cfg_gpio_negedge_int_sel ;// select negedge interrupt
diff --git a/verilog/rtl/pinmux/src/pinmux.sv b/verilog/rtl/pinmux/src/pinmux.sv
index 54c0ef9..652305d 100755
--- a/verilog/rtl/pinmux/src/pinmux.sv
+++ b/verilog/rtl/pinmux/src/pinmux.sv
@@ -34,65 +34,79 @@
//// Revision : ////
//// 0.1 - 16th Aug 2022, Dinesh A ////
//// Seperated the pinmux from pinmux_top module ////
+//// 0.2 - 21th Aug 2022, Dinesh A ////
+//// uart_master disable option added ////
+//// 0.3 - 28th Aug 2022, Dinesh A ////
+//// Due to caravel io[4:0] reserved on power up, we have////
+//// re-arrange the arduino pins from 5 onward ////
//////////////////////////////////////////////////////////////////////
/************************************************
-* Pin Mapping ATMGE CONFIG
-* ATMEGA328 caravel Pin Mapping
-* Pin-1 PC6/RESET* digital_io[0]
-* Pin-2 PD0/RXD[0] digital_io[1]
-* Pin-3 PD1/TXD[0] digital_io[2]
-* Pin-4 PD2/RXD[1]/INT0 digital_io[3]
-* Pin-5 PD3/INT1/OC2B(PWM0) digital_io[4]
-* Pin-6 PD4/TXD[1] digital_io[5]
-* Pin-7 VCC -
-* Pin-8 GND -
-* Pin-9 PB6/XTAL1/TOSC1 digital_io[6]
-* Pin-10 PB7/XTAL2/TOSC2 digital_io[7]
-* Pin-11 PD5/SS[3]/OC0B(PWM1)/T1 digital_io[8]
-* Pin-12 PD6/SS[2]/OC0A(PWM2)/AIN0 digital_io[9]/analog_io[2]
-* Pin-13 PD7/A1N1 digital_io[10]/analog_io[3]
-* Pin-14 PB0/CLKO/ICP1 digital_io[11]
-* Pin-15 PB1/SS[1]OC1A(PWM3) digital_io[12]
-* Pin-16 PB2/SS[0]/OC1B(PWM4) digital_io[13]
-* Pin-17 PB3/MOSI/OC2A(PWM5) digital_io[14]
-* Pin-18 PB4/MISO digital_io[15]
-* Pin-19 PB5/SCK digital_io[16]
-* Pin-20 AVCC -
-* Pin-21 AREF analog_io[10]
-* Pin-22 GND -
-* Pin-23 PC0/ADC0 digital_io[18]/analog_io[11]
-* Pin-24 PC1/ADC1 digital_io[19]/analog_io[12]
-* Pin-25 PC2/ADC2 digital_io[20]/analog_io[13]
-* Pin-26 PC3/ADC3 digital_io[21]/analog_io[14]
-* Pin-27 PC4/ADC4/SDA digital_io[22]/analog_io[15]
-* Pin-28 PC5/ADC5/SCL digital_io[23]/analog_io[16]
+* Pin Mapping Arduino ATMGE CONFIG
+* ATMEGA328 Port caravel Pin Mapping
+* Pin-1 22 PC6/WS[0]/RESET* digital_io[5]
+* Pin-2 0 PD0/WS[0]/RXD[0] digital_io[6]
+* Pin-3 1 PD1/WS[0]/TXD[0] digital_io[7]
+* Pin-4 2 PD2/WS[0]/RXD[1]/INT0 digital_io[8]
+* Pin-5 3 PD3/WS[1]INT1/OC2B(PWM0) digital_io[9]
+* Pin-6 4 PD4/WS[1]TXD[1] digital_io[10]
+* Pin-7 VCC -
+* Pin-8 GND -
+* Pin-9 20 PB6/WS[1]/XTAL1/TOSC1 digital_io[11]
+* Pin-10 21 PB7/WS[1]/XTAL2/TOSC2 digital_io[12]
+* Pin-11 5 PD5/WS[2]/SS[3]/OC0B(PWM1)/T1 strap[0] digital_io[13]
+* Pin-12 6 PD6/WS[2]/SS[2]/OC0A(PWM2)/AIN0 strap[1] digital_io[14]/analog_io[2]
+* Pin-13 7 PD7/WS[2]/A1N1 strap[2] digital_io[15]/analog_io[3]
+* Pin-14 8 PB0/WS[2]/CLKO/ICP1 strap[3] digital_io[16]
+* Pin-15 9 PB1/WS[3]/SS[1]OC1A(PWM3) strap[4] digital_io[17]
+* Pin-16 10 PB2/WS[3]/SS[0]/OC1B(PWM4) strap[5] digital_io[18]
+* Pin-17 11 PB3/WS[3]/MOSI/OC2A(PWM5) strap[6] digital_io[19]
+* Pin-18 12 PB4/WS[3]/MISO strap[7] digital_io[20]
+* Pin-19 13 PB5/SCK digital_io[21]
+* Pin-20 AVCC -
+* Pin-21 AREF analog_io[10]
+* Pin-22 GND -
+* Pin-23 14 PC0/uartm_rxd/ADC0 digital_io[22]/analog_io[11]
+* Pin-24 15 PC1/uartm_txd/ADC1 digital_io[23]/analog_io[12]
+* Pin-25 16 PC2/usb_dp/ADC2 digital_io[24]/analog_io[13]
+* Pin-26 17 PC3/usb_dn/ADC3 digital_io[25]/analog_io[14]
+* Pin-27 18 PC4/ADC4/SDA digital_io[26]/analog_io[15]
+* Pin-28 19 PC5/ADC5/SCL digital_io[27]/analog_io[16]
*
* Additional Pad used for Externam ROM/RAM
-* sflash_sck digital_io[24]
-* sflash_ss[0] digital_io[25]
-* sflash_ss[1] digital_io[26]
-* sflash_ss[2] digital_io[27]
-* sflash_ss[3] digital_io[28]
-* sflash_io0 digital_io[29]
-* sflash_io1 digital_io[30]
-* sflash_io2 digital_io[31]
-* sflash_io3 digital_io[32]
-* dbg_clk_mon digital_io[33]
-* uartm_rxd digital_io[34]
-* uartm_txd digital_io[35]
-* usb_dp digital_io[36]
-* usb_dn digital_io[37]
+* sflash_sck digital_io[28]
+* sflash_ss[0] strap[8] digital_io[29]
+* sflash_ss[1] strap[9] digital_io[30]
+* sflash_ss[2] strap[10] digital_io[31]
+* sflash_ss[3] strap[11] digital_io[32]
+* sflash_io0 strap[12] digital_io[33]
+* sflash_io1 strap[13] digital_io[34]
+* sflash_io2 strap[14] digital_io[35]
+* sflash_io3 strap[15] digital_io[36]
+* dbg_clk_mon digital_io[37]
+* These port are not available at power up
+* PA0 digital_io[0]
+* PA1 digital_io[1]
+* PA2 digital_io[2]
+* PA3 digital_io[3]
+* PA4 digital_io[4]
****************************************************************
* Pin-1 RESET is not supported as there is no suppport for fuse config
+
+
**************/
module pinmux (
+ input logic cfg_strap_pad_ctrl , // 1 - Keep the Pad in input direction
+ output logic [15:0] pad_strap_in , // Strap value
// Digital IO
output logic [37:0] digital_io_out ,
output logic [37:0] digital_io_oen ,
input logic [37:0] digital_io_in ,
+ output logic xtal_clk ,
+
// Config
+ input logic [31:0] cfg_gpio_out_type ,// GPIO Type, 1 - WS_281X port
input logic [31:0] cfg_gpio_dir_sel ,
input logic [31:0] cfg_multi_func_sel ,
@@ -151,6 +165,9 @@
output logic uartm_rxd ,
input logic uartm_txd ,
+ // WS_281X TXD Port
+ input logic [3:0] ws_txd,
+
input logic dbg_clk_mon
);
@@ -167,6 +184,13 @@
wire [7:0] port_c_out; // PORT C Data Out
wire [7:0] port_d_out; // PORT D Data Out
+//--------------------------------------------------
+// Strap Pin Mapping
+//--------------------------------------------------
+assign pad_strap_in = {digital_io_in[36:29],digital_io_in[20:13] };
+
+assign xtal_clk = digital_io_in[11];
+
// GPIO to PORT Mapping
assign pad_gpio_in[7:0] = port_a_in;
assign pad_gpio_in[15:8] = port_b_in;
@@ -185,17 +209,23 @@
wire cfg_spim_enb = cfg_multi_func_sel[10];
wire [3:0] cfg_spim_cs_enb = cfg_multi_func_sel[14:11];
wire cfg_i2cm_enb = cfg_multi_func_sel[15];
+wire cfg_usb_enb = cfg_multi_func_sel[16];
+wire cfg_muart_enb = cfg_multi_func_sel[31]; // 1 - uart master enable,
wire [7:0] cfg_port_a_dir_sel = cfg_gpio_dir_sel[7:0];
wire [7:0] cfg_port_b_dir_sel = cfg_gpio_dir_sel[15:8];
wire [7:0] cfg_port_c_dir_sel = cfg_gpio_dir_sel[23:16];
wire [7:0] cfg_port_d_dir_sel = cfg_gpio_dir_sel[31:24];
+wire [7:0] cfg_port_a_port_type = cfg_gpio_out_type[7:0];
+wire [7:0] cfg_port_b_port_type = cfg_gpio_out_type[15:8];
+wire [7:0] cfg_port_c_port_type = cfg_gpio_out_type[23:16];
+wire [7:0] cfg_port_d_port_type = cfg_gpio_out_type[31:24];
// This logic to create spi slave interface
logic pin_resetn,spis_boot;
-// On Reset internal SPI Master is disabled, If pin_reset = 0, then we are in
+// On Reset internal SPI Master is disabled, If cfg_spim_enb = 0, then we are in
// SPIS Boot Mode
assign spis_boot = (cfg_spim_enb ) ? 1'b0: !pin_resetn;
assign spis_ssn = (spis_boot ) ? pin_resetn : 1'b1;
@@ -212,329 +242,389 @@
i2cm_data_i= 'h0;
i2cm_clk_i = 'h0;
- //Pin-1 PC6/RESET* digital_io[0]
- port_c_in[6] = digital_io_in[0];
- pin_resetn = digital_io_in[0];
+ //Pin-1 PC6/RESET* digital_io[5]
+ port_c_in[6] = digital_io_in[5];
+ pin_resetn = digital_io_in[5];
- //Pin-2 PD0/RXD[0] digital_io[1]
- port_d_in[0] = digital_io_in[1];
- if(cfg_uart_enb[0]) uart_rxd[0] = digital_io_in[1];
+ //Pin-2 PD0/RXD[0] digital_io[6]
+ port_d_in[0] = digital_io_in[6];
+ if(cfg_uart_enb[0]) uart_rxd[0] = digital_io_in[6];
- //Pin-3 PD1/TXD[0] digital_io[2]
- port_d_in[1] = digital_io_in[2];
+ //Pin-3 PD1/TXD[0] digital_io[7]
+ port_d_in[1] = digital_io_in[7];
- //Pin-4 PD2/RXD[1]/INT0 digital_io[3]
- port_d_in[2] = digital_io_in[3];
- if(cfg_uart_enb[1]) uart_rxd[1] = digital_io_in[3];
- else if(cfg_int_enb[0]) ext_intr_in[0] = digital_io_in[3];
+ //Pin-4 PD2/RXD[1]/INT0 digital_io[8]
+ port_d_in[2] = digital_io_in[8];
+ if(cfg_uart_enb[1]) uart_rxd[1] = digital_io_in[8];
+ else if(cfg_int_enb[0]) ext_intr_in[0] = digital_io_in[8];
- //Pin-5 PD3/INT1/OC2B(PWM0) digital_io[4]
- port_d_in[3] = digital_io_in[4];
- if(cfg_int_enb[1]) ext_intr_in[1] = digital_io_in[4];
+ //Pin-5 PD3/INT1/OC2B(PWM0) digital_io[9]
+ port_d_in[3] = digital_io_in[9];
+ if(cfg_int_enb[1]) ext_intr_in[1] = digital_io_in[9];
- //Pin-6 PD4/TXD[1] digital_io[5]
- port_d_in[4] = digital_io_in[5];
+ //Pin-6 PD4/TXD[1] digital_io[10]
+ port_d_in[4] = digital_io_in[10];
- //Pin-9 PB6/XTAL1/TOSC1 digital_io[6]
- port_b_in[6] = digital_io_in[6];
+ //Pin-9 PB6/XTAL1/TOSC1 digital_io[11]
+ port_b_in[6] = digital_io_in[11];
- // Pin-10 PB7/XTAL2/TOSC2 digital_io[7]
- port_b_in[7] = digital_io_in[7];
+ // Pin-10 PB7/XTAL2/TOSC2 digital_io[12]
+ port_b_in[7] = digital_io_in[12];
- //Pin-11 PD5/OC0B(PWM1)/T1 digital_io[8]
- port_d_in[5] = digital_io_in[8];
+ //Pin-11 PD5/OC0B(PWM1)/T1 digital_io[13]
+ port_d_in[5] = digital_io_in[13];
- //Pin-12 PD6/OC0A(PWM2)/AIN0 digital_io[9] /analog_io[2]
- port_d_in[6] = digital_io_in[9];
+ //Pin-12 PD6/OC0A(PWM2)/AIN0 digital_io[14] /analog_io[2]
+ port_d_in[6] = digital_io_in[14];
- //Pin-13 PD7/A1N1 digital_io[10]/analog_io[3]
- port_d_in[7] = digital_io_in[10];
+ //Pin-13 PD7/A1N1 digital_io[15]/analog_io[3]
+ port_d_in[7] = digital_io_in[15];
- //Pin-14 PB0/CLKO/ICP1 digital_io[11]
- port_b_in[0] = digital_io_in[11];
+ //Pin-14 PB0/CLKO/ICP1 digital_io[16]
+ port_b_in[0] = digital_io_in[16];
- //Pin-15 PB1/OC1A(PWM3) digital_io[12]
- port_b_in[1] = digital_io_in[12];
+ //Pin-15 PB1/OC1A(PWM3) digital_io[17]
+ port_b_in[1] = digital_io_in[17];
- //Pin-16 PB2/SS/OC1B(PWM4) digital_io[13]
- port_b_in[2] = digital_io_in[13];
+ //Pin-16 PB2/SS/OC1B(PWM4) digital_io[18]
+ port_b_in[2] = digital_io_in[18];
- //Pin-17 PB3/MOSI/OC2A(PWM5) digital_io[14]
- port_b_in[3] = digital_io_in[14];
- if(cfg_spim_enb) spim_mosi = digital_io_in[14]; // SPIM MOSI (Input) = SPIS MISO (Output)
+ //Pin-17 PB3/MOSI/OC2A(PWM5) digital_io[19]
+ port_b_in[3] = digital_io_in[19];
+ if(cfg_spim_enb) spim_mosi = digital_io_in[19]; // SPIM MOSI (Input) = SPIS MISO (Output)
- //Pin-18 PB4/MISO digital_io[15]
- port_b_in[4] = digital_io_in[15];
- spis_mosi = (spis_boot) ? digital_io_in[15] : 1'b0; // SPIM MISO (Output) = SPIS MOSI (Input)
+ //Pin-18 PB4/MISO digital_io[20]
+ port_b_in[4] = digital_io_in[20];
+ spis_mosi = (spis_boot) ? digital_io_in[20] : 1'b0; // SPIM MISO (Output) = SPIS MOSI (Input)
- //Pin-19 PB5/SCK digital_io[16]
- port_b_in[5]= digital_io_in[16];
- spis_sck = (spis_boot) ? digital_io_in[16] : 1'b1; // SPIM SCK (Output) = SPIS SCK (Input)
+ //Pin-19 PB5/SCK digital_io[21]
+ port_b_in[5]= digital_io_in[21];
+ spis_sck = (spis_boot) ? digital_io_in[21] : 1'b1; // SPIM SCK (Output) = SPIS SCK (Input)
- //Pin-23 PC0/ADC0 digital_io[18]/analog_io[11]
- port_c_in[0] = digital_io_in[18];
+ //Pin-23 PC0/ADC0 digital_io[22]/uartm_rxd/analog_io[11]
+ uartm_rxd = (cfg_muart_enb) ? digital_io_in[22]: 1'b1;
+ port_c_in[0] = digital_io_in[22];
- //Pin-24 PC1/ADC1 digital_io[19]/analog_io[12]
- port_c_in[1] = digital_io_in[19];
+ //Pin-24 PC1/ADC1 digital_io[23]/uartm_txd/analog_io[12]
+ port_c_in[1] = digital_io_in[23];
- //Pin-25 PC2/ADC2 digital_io[20]/analog_io[13]
- port_c_in[2] = digital_io_in[20];
+ //Pin-25 PC2/ADC2 digital_io[24]/usb_dp/analog_io[13]
+ usb_dp_i = (cfg_usb_enb) ? digital_io_in[24] : 1'b1;
+ port_c_in[2] = digital_io_in[24];
- //Pin-26 PC3/ADC3 digital_io[21]/analog_io[14]
- port_c_in[3] = digital_io_in[21];
+ //Pin-26 PC3/ADC3 digital_io[25]/usb_dn/analog_io[14]
+ usb_dn_i = (cfg_usb_enb) ? digital_io_in[25] : 1'b1;
+ port_c_in[3] = digital_io_in[25];
- //Pin-27 PC4/ADC4/SDA digital_io[22]/analog_io[15]
- port_c_in[4] = digital_io_in[22];
- if(cfg_i2cm_enb) i2cm_data_i = digital_io_in[22];
+ //Pin-27 PC4/ADC4/SDA digital_io[26]/analog_io[15]
+ port_c_in[4] = digital_io_in[26];
+ if(cfg_i2cm_enb) i2cm_data_i = digital_io_in[26];
- //Pin-28 PC5/ADC5/SCL digital_io[23]/analog_io[16]
- port_c_in[5] = digital_io_in[23];
- if(cfg_i2cm_enb) i2cm_clk_i = digital_io_in[23];
+ //Pin-28 PC5/ADC5/SCL digital_io[27]/analog_io[16]
+ port_c_in[5] = digital_io_in[27];
+ if(cfg_i2cm_enb) i2cm_clk_i = digital_io_in[27];
- sflash_di[0] = digital_io_in[29];
- sflash_di[1] = digital_io_in[30];
- sflash_di[2] = digital_io_in[31];
- sflash_di[3] = digital_io_in[32];
+ sflash_di[0] = digital_io_in[33];
+ sflash_di[1] = digital_io_in[34];
+ sflash_di[2] = digital_io_in[35];
+ sflash_di[3] = digital_io_in[36];
+
+ port_a_in[0] = digital_io_in[0];
+ port_a_in[1] = digital_io_in[1];
+ port_a_in[2] = digital_io_in[2];
+ port_a_in[3] = digital_io_in[3];
+ port_a_in[4] = digital_io_in[4];
- // UAR MASTER I/F
- uartm_rxd = digital_io_in[34];
-
- usb_dp_i = digital_io_in[36];
- usb_dn_i = digital_io_in[37];
end
// dataout selection
always_comb begin
digital_io_out = 'h0;
- //Pin-1 PC6/RESET* digital_io[0]
- if(cfg_port_c_dir_sel[6]) digital_io_out[0] = port_c_out[6];
+ //Pin-1 PC6/WS[0]/RESET* digital_io[5]
+ if(cfg_port_c_port_type[6]) digital_io_out[5] = ws_txd[0];
+ else if(cfg_port_c_dir_sel[6]) digital_io_out[5] = port_c_out[6];
- //Pin-2 PD0/RXD[0] digital_io[1]
- if(cfg_port_d_dir_sel[0]) digital_io_out[1] = port_d_out[0];
+ //Pin-2 PD0/WS[0]/RXD[0] digital_io[6]
+ if(cfg_port_d_port_type[0]) digital_io_out[6] = ws_txd[0];
+ else if(cfg_port_d_dir_sel[0]) digital_io_out[6] = port_d_out[0];
- //Pin-3 PD1/TXD[0] digital_io[2]
- if (cfg_uart_enb[0]) digital_io_out[2] = uart_txd[0];
- else if(cfg_port_d_dir_sel[1]) digital_io_out[2] = port_d_out[1];
+ //Pin-3 PD1/WS[0]/TXD[0] digital_io[7]
+ if (cfg_uart_enb[0]) digital_io_out[7] = uart_txd[0];
+ else if(cfg_port_d_port_type[1]) digital_io_out[7] = ws_txd[0];
+ else if(cfg_port_d_dir_sel[1]) digital_io_out[7] = port_d_out[1];
- //Pin-4 PD2/RXD[1]/INT0 digital_io[3]
- if(cfg_port_d_dir_sel[2]) digital_io_out[3] = port_d_out[2];
+ //Pin-4 PD2/WS[0]/RXD[1]/INT0 digital_io[8]
+ if(cfg_port_d_port_type[2]) digital_io_out[8] = ws_txd[0];
+ else if(cfg_port_d_dir_sel[2]) digital_io_out[8] = port_d_out[2];
- //Pin-5 PD3/INT1/OC2B(PWM0) digital_io[4]
- if(cfg_pwm_enb[0]) digital_io_out[4] = pwm_wfm[0];
- else if(cfg_port_d_dir_sel[3]) digital_io_out[4] = port_d_out[3];
+ //Pin-5 PD3/WS[1]INT1/OC2B(PWM0) digital_io[9]
+ if(cfg_pwm_enb[0]) digital_io_out[9] = pwm_wfm[0];
+ else if(cfg_port_d_port_type[3])digital_io_out[9] = ws_txd[1];
+ else if(cfg_port_d_dir_sel[3]) digital_io_out[9] = port_d_out[3];
- //Pin-6 PD4/TXD[1] digital_io[5]
- if (cfg_uart_enb[1]) digital_io_out[5] = uart_txd[1];
- else if(cfg_port_d_dir_sel[4]) digital_io_out[5] = port_d_out[4];
+ //Pin-6 PD4/WS[1]/TXD[1] digital_io[10]
+ if (cfg_uart_enb[1]) digital_io_out[10] = uart_txd[1];
+ else if(cfg_port_d_port_type[4]) digital_io_out[10] = ws_txd[1];
+ else if(cfg_port_d_dir_sel[4]) digital_io_out[10] = port_d_out[4];
- //Pin-9 PB6/XTAL1/TOSC1 digital_io[6]
- if(cfg_port_b_dir_sel[6]) digital_io_out[6] = port_b_out[6];
+ //Pin-9 PB6/XTAL1/WS[1]/TOSC1 digital_io[11]
+ if(cfg_port_b_port_type[6]) digital_io_out[11] = ws_txd[1];
+ else if(cfg_port_b_dir_sel[6]) digital_io_out[11] = port_b_out[6];
- // Pin-10 PB7/XTAL2/TOSC2 digital_io[7]
- if(cfg_port_b_dir_sel[7]) digital_io_out[7] = port_b_out[7];
+ // Pin-10 PB7/XTAL2/WS[1]/TOSC2 digital_io[12]
+ if(cfg_port_b_port_type[7]) digital_io_out[12] = ws_txd[1];
+ else if(cfg_port_b_dir_sel[7]) digital_io_out[12] = port_b_out[7];
- //Pin-11 PD5/SS[3]/OC0B(PWM1)/T1 digital_io[8]
- if(cfg_pwm_enb[1]) digital_io_out[8] = pwm_wfm[1];
- else if(cfg_spim_cs_enb[3]) digital_io_out[8] = spim_ssn[3];
- else if(cfg_port_d_dir_sel[5]) digital_io_out[8] = port_d_out[5];
+ //Pin-11 PD5/SS[3]/WS[2]/OC0B(PWM1)/T1 digital_io[13]
+ if(cfg_pwm_enb[1]) digital_io_out[13] = pwm_wfm[1];
+ else if(cfg_spim_cs_enb[3]) digital_io_out[13] = spim_ssn[3];
+ else if(cfg_port_d_port_type[5])digital_io_out[13] = ws_txd[2];
+ else if(cfg_port_d_dir_sel[5]) digital_io_out[13] = port_d_out[5];
- //Pin-12 PD6/SS[2]/OC0A(PWM2)/AIN0 digital_io[9] /analog_io[2]
- if(cfg_pwm_enb[2]) digital_io_out[9] = pwm_wfm[2];
- else if(cfg_spim_cs_enb[2]) digital_io_out[9] = spim_ssn[2];
- else if(cfg_port_d_dir_sel[6]) digital_io_out[9] = port_d_out[6];
+ //Pin-12 PD6/SS[2]/WS[2]/OC0A(PWM2)/AIN0 digital_io[14] /analog_io[2]
+ if(cfg_pwm_enb[2]) digital_io_out[14] = pwm_wfm[2];
+ else if(cfg_spim_cs_enb[2]) digital_io_out[14] = spim_ssn[2];
+ else if(cfg_port_d_port_type[6])digital_io_out[14] = ws_txd[2];
+ else if(cfg_port_d_dir_sel[6]) digital_io_out[14] = port_d_out[6];
- //Pin-13 PD7/A1N1 digital_io[10]/analog_io[3]
- if(cfg_port_d_dir_sel[7]) digital_io_out[10] = port_d_out[7];
+ //Pin-13 PD7/A1N1/WS[2] digital_io[15]/analog_io[3]
+ if(cfg_port_d_port_type[7]) digital_io_out[15] = ws_txd[2];
+ else if(cfg_port_d_dir_sel[7]) digital_io_out[15] = port_d_out[7];
- //Pin-14 PB0/CLKO/ICP1 digital_io[11]
- if(cfg_port_b_dir_sel[0]) digital_io_out[11] = port_b_out[0];
+ //Pin-14 PB0/CLKO/WS[2]/ICP1 digital_io[16]
+ if(cfg_port_b_port_type[0]) digital_io_out[16] = ws_txd[2];
+ else if(cfg_port_b_dir_sel[0]) digital_io_out[16] = port_b_out[0];
- //Pin-15 PB1/SS[1]/OC1A(PWM3) digital_io[12]
- if(cfg_pwm_enb[3]) digital_io_out[12] = pwm_wfm[3];
- else if(cfg_spim_cs_enb[1]) digital_io_out[12] = spim_ssn[1];
- else if(cfg_port_b_dir_sel[1]) digital_io_out[12] = port_b_out[1];
+ //Pin-15 PB1/SS[1]/WS[3]/OC1A(PWM3) digital_io[17]
+ if(cfg_pwm_enb[3]) digital_io_out[17] = pwm_wfm[3];
+ else if(cfg_spim_cs_enb[1]) digital_io_out[17] = spim_ssn[1];
+ else if(cfg_port_b_port_type[1])digital_io_out[17] = ws_txd[3];
+ else if(cfg_port_b_dir_sel[1]) digital_io_out[17] = port_b_out[1];
- //Pin-16 PB2/SS[0]/OC1B(PWM4) digital_io[13]
- if(cfg_pwm_enb[4]) digital_io_out[13] = pwm_wfm[4];
- else if(cfg_spim_cs_enb[0]) digital_io_out[13] = spim_ssn[0];
- else if(cfg_port_b_dir_sel[2]) digital_io_out[13] = port_b_out[2];
+ //Pin-16 PB2/SS[0]/WS[3]/OC1B(PWM4) digital_io[18]
+ if(cfg_pwm_enb[4]) digital_io_out[18] = pwm_wfm[4];
+ else if(cfg_spim_cs_enb[0]) digital_io_out[18] = spim_ssn[0];
+ else if(cfg_port_b_port_type[2])digital_io_out[18] = ws_txd[3];
+ else if(cfg_port_b_dir_sel[2]) digital_io_out[18] = port_b_out[2];
- //Pin-17 PB3/MOSI/OC2A(PWM5) digital_io[14]
- if(cfg_pwm_enb[5]) digital_io_out[14] = pwm_wfm[5];
- else if(cfg_port_b_dir_sel[3]) digital_io_out[14] = port_b_out[3];
- else if(spis_boot) digital_io_out[14] = spis_miso; // SPIM MOSI (Input) = SPIS MISO (Output)
+ //Pin-17 PB3/MOSI/WS[3]/OC2A(PWM5) digital_io[19]
+ if(cfg_pwm_enb[5]) digital_io_out[19] = pwm_wfm[5];
+ else if(cfg_port_b_port_type[3]) digital_io_out[19] = ws_txd[3];
+ else if(cfg_port_b_dir_sel[3]) digital_io_out[19] = port_b_out[3];
+ else if(spis_boot) digital_io_out[19] = spis_miso; // SPIM MOSI (Input) = SPIS MISO (Output)
- //Pin-18 PB4/MISO digital_io[15]
- if(cfg_spim_enb) digital_io_out[15] = spim_miso; // SPIM MISO (Output) = SPIS MOSI (Input)
- else if(cfg_port_b_dir_sel[4]) digital_io_out[15] = port_b_out[4];
+ //Pin-18 PB4/WS[3]/MISO digital_io[20]
+ if(cfg_spim_enb) digital_io_out[20] = spim_miso; // SPIM MISO (Output) = SPIS MOSI (Input)
+ else if(cfg_port_b_port_type[4])digital_io_out[20] = ws_txd[3];
+ else if(cfg_port_b_dir_sel[4]) digital_io_out[20] = port_b_out[4];
- //Pin-19 PB5/SCK digital_io[16]
- if(cfg_spim_enb) digital_io_out[16] = spim_sck; // SPIM SCK (Output) = SPIS SCK (Input)
- else if(cfg_port_b_dir_sel[5]) digital_io_out[16] = port_b_out[5];
+ //Pin-19 PB5/SCK digital_io[21]
+ if(cfg_spim_enb) digital_io_out[21] = spim_sck; // SPIM SCK (Output) = SPIS SCK (Input)
+ else if(cfg_port_b_dir_sel[5]) digital_io_out[21] = port_b_out[5];
- //Pin-23 PC0/ADC0 digital_io[18]/analog_io[11]
- if(cfg_port_c_dir_sel[0]) digital_io_out[18] = port_c_out[0];
+ //Pin-23 PC0/MRXD/ADC0 digital_io[22]/analog_io[11]
+ if(cfg_muart_enb) digital_io_out[22] = 1'b1;
+ else if(cfg_port_c_dir_sel[0]) digital_io_out[22] = port_c_out[0];
- //Pin-24 PC1/ADC1 digital_io[19]/analog_io[12]
- if(cfg_port_c_dir_sel[1]) digital_io_out[19] = port_c_out[1];
+ //Pin-24 PC1/MTXD/ADC1 digital_io[23]/analog_io[12]
+ if(cfg_muart_enb) digital_io_out[23] = uartm_txd;
+ else if(cfg_port_c_dir_sel[1]) digital_io_out[23] = port_c_out[1];
- //Pin-25 PC2/ADC2 digital_io[20]/analog_io[13]
- if(cfg_port_c_dir_sel[2]) digital_io_out[20] = port_c_out[2];
+ //Pin-25 PC2/USB_DP/ADC2 digital_io[24]/analog_io[13]
+ if(cfg_usb_enb) digital_io_out[24] = usb_dp_o;
+ else if(cfg_port_c_dir_sel[2]) digital_io_out[24] = port_c_out[2];
- //Pin-26 PC3/ADC3 digital_io[21]/analog_io[14]
- if(cfg_port_c_dir_sel[3]) digital_io_out[21] = port_c_out[3];
+ //Pin-26 PC3/USB_DN/ADC3 digital_io[25]/analog_io[14]
+ if(cfg_usb_enb) digital_io_out[25] = usb_dn_o;
+ if(cfg_port_c_dir_sel[3]) digital_io_out[25] = port_c_out[3];
- //Pin-27 PC4/ADC4/SDA digital_io[22]/analog_io[15]
- if(cfg_i2cm_enb) digital_io_out[22] = i2cm_data_o;
- else if(cfg_port_c_dir_sel[4]) digital_io_out[22] = port_c_out[4];
+ //Pin-27 PC4/ADC4/SDA digital_io[26]/analog_io[15]
+ if(cfg_i2cm_enb) digital_io_out[26] = i2cm_data_o;
+ else if(cfg_port_c_dir_sel[4]) digital_io_out[26] = port_c_out[4];
- //Pin-28 PC5/ADC5/SCL digital_io[23]/analog_io[16]
- if(cfg_i2cm_enb) digital_io_out[23] = i2cm_clk_o;
- else if(cfg_port_c_dir_sel[5]) digital_io_out[23] = port_c_out[5];
+ //Pin-28 PC5/ADC5/SCL digital_io[27]/analog_io[16]
+ if(cfg_i2cm_enb) digital_io_out[27] = i2cm_clk_o;
+ else if(cfg_port_c_dir_sel[5]) digital_io_out[27] = port_c_out[5];
// Serial Flash
- digital_io_out[24] = sflash_sck ;
- digital_io_out[25] = sflash_ss[0] ;
- digital_io_out[26] = sflash_ss[1] ;
- digital_io_out[27] = sflash_ss[2] ;
- digital_io_out[28] = sflash_ss[3] ;
- digital_io_out[29] = sflash_do[0] ;
- digital_io_out[30] = sflash_do[1] ;
- digital_io_out[31] = sflash_do[2] ;
- digital_io_out[32] = sflash_do[3] ;
+ digital_io_out[28] = sflash_sck ;
+ digital_io_out[29] = sflash_ss[0] ;
+ digital_io_out[30] = sflash_ss[1] ;
+ digital_io_out[31] = sflash_ss[2] ;
+ digital_io_out[32] = sflash_ss[3] ;
+ digital_io_out[33] = sflash_do[0] ;
+ digital_io_out[34] = sflash_do[1] ;
+ digital_io_out[35] = sflash_do[2] ;
+ digital_io_out[36] = sflash_do[3] ;
// dbg_clk_mon - Pll clock output monitor
- digital_io_out[33] = dbg_clk_mon;
+ digital_io_out[37] = dbg_clk_mon;
- // UART MASTER I/f
- digital_io_out[34] = 1'b0 ; // RXD
- digital_io_out[35] = uartm_txd ; // TXD
-
- // USB 1.1
- digital_io_out[36] = usb_dp_o ;
- digital_io_out[37] = usb_dn_o ;
+ digital_io_out[0] = port_a_out[0] ;
+ digital_io_out[1] = port_a_out[1] ;
+ digital_io_out[2] = port_a_out[2] ;
+ digital_io_out[3] = port_a_out[3] ;
+ digital_io_out[4] = port_a_out[4] ;
end
// dataoen selection
always_comb begin
digital_io_oen = 38'h3F_FFFF_FFFF;
- //Pin-1 PC6/RESET* digital_io[0]
- if(cfg_port_c_dir_sel[6]) digital_io_oen[0] = 1'b0;
- //Pin-2 PD0/RXD[0] digital_io[1]
- if (cfg_uart_enb[0]) digital_io_oen[1] = 1'b1;
- else if(cfg_port_d_dir_sel[0]) digital_io_oen[1] = 1'b0;
+ //Pin-1 PC6/WS[0]/RESET* digital_io[5]
+ if(cfg_port_c_port_type[6]) digital_io_oen[5] = 1'b1;
+ else if(cfg_port_c_dir_sel[6]) digital_io_oen[5] = 1'b0;
- //Pin-3 PD1/TXD[0] digital_io[2]
- if (cfg_uart_enb[0]) digital_io_oen[2] = 1'b0;
- else if(cfg_port_d_dir_sel[1]) digital_io_oen[2] = 1'b0;
+ //Pin-2 PD0/WS[0]/RXD[0] digital_io[6]
+ if (cfg_uart_enb[0]) digital_io_oen[6] = 1'b1;
+ else if(cfg_port_d_port_type[0])digital_io_oen[6] = 1'b1;
+ else if(cfg_port_d_dir_sel[0]) digital_io_oen[6] = 1'b0;
- //Pin-4 PD2/RXD[1]/INT0 digital_io[3]
- if (cfg_uart_enb[1]) digital_io_oen[3] = 1'b1;
- else if(cfg_int_enb[0]) digital_io_oen[3] = 1'b1;
- else if(cfg_port_d_dir_sel[2]) digital_io_oen[3] = 1'b0;
+ //Pin-3 PD1/WS[0]/TXD[0] digital_io[7]
+ if (cfg_uart_enb[0]) digital_io_oen[7] = 1'b0;
+ else if(cfg_port_d_port_type[1])digital_io_oen[7] = 1'b1;
+ else if(cfg_port_d_dir_sel[1]) digital_io_oen[7] = 1'b0;
- //Pin-5 PD3/INT1/OC2B(PWM0) digital_io[4]
- if(cfg_pwm_enb[0]) digital_io_oen[4] = 1'b0;
- else if(cfg_int_enb[1]) digital_io_oen[4] = 1'b1;
- else if(cfg_port_d_dir_sel[3]) digital_io_oen[4] = 1'b0;
+ //Pin-4 PD2/WS[0]/RXD[1]/INT0 digital_io[8]
+ if(cfg_int_enb[0]) digital_io_oen[8] = 1'b1;
+ else if(cfg_port_d_port_type[2])digital_io_oen[8] = 1'b1;
+ else if(cfg_port_d_dir_sel[2]) digital_io_oen[8] = 1'b0;
- //Pin-6 PD4/TXD[1] digital_io[5]
- if (cfg_uart_enb[1]) digital_io_oen[5] = 1'b0;
- else if(cfg_port_d_dir_sel[4]) digital_io_oen[5] = 1'b0;
+ //Pin-5 PD3/WS[1]/INT1/OC2B(PWM0) digital_io[9]
+ if(cfg_pwm_enb[0]) digital_io_oen[9] = 1'b0;
+ else if(cfg_int_enb[1]) digital_io_oen[9] = 1'b1;
+ else if(cfg_port_d_port_type[3])digital_io_oen[9] = 1'b1;
+ else if(cfg_port_d_dir_sel[3]) digital_io_oen[9] = 1'b0;
- //Pin-9 PB6/XTAL1/TOSC1 digital_io[6]
- if(cfg_port_b_dir_sel[6]) digital_io_oen[6] = 1'b0;
+ //Pin-6 PD4/WS[1]/TXD[1] digital_io[10]
+ if (cfg_uart_enb[1]) digital_io_oen[10] = 1'b0;
+ else if(cfg_port_d_port_type[4])digital_io_oen[10] = 1'b1;
+ else if(cfg_port_d_dir_sel[4]) digital_io_oen[10] = 1'b0;
- // Pin-10 PB7/XTAL2/TOSC2 digital_io[7]
- if(cfg_port_b_dir_sel[7]) digital_io_oen[7] = 1'b0;
+ //Pin-9 PB6/WS[1]/XTAL1/TOSC1 digital_io[11]
+ if (cfg_uart_enb[1]) digital_io_oen[11] = 1'b1;
+ else if(cfg_port_b_port_type[6]) digital_io_oen[11] = 1'b1;
+ else if(cfg_port_b_dir_sel[6]) digital_io_oen[11] = 1'b0;
- //Pin-11 PD5/SS[3]/OC0B(PWM1)/T1 digital_io[8]
- if(cfg_pwm_enb[1]) digital_io_oen[8] = 1'b0;
- else if(cfg_spim_cs_enb[3]) digital_io_oen[8] = 1'b0;
- else if(cfg_port_d_dir_sel[5]) digital_io_oen[8] = 1'b0;
+ // Pin-10 PB7/WS[1]/XTAL2/TOSC2 digital_io[12]
+ if(cfg_port_b_port_type[7]) digital_io_oen[12] = 1'b1;
+ else if(cfg_port_b_dir_sel[7]) digital_io_oen[12] = 1'b0;
- //Pin-12 PD6/SS[2]/OC0A(PWM2)/AIN0 digital_io[9] /analog_io[2]
- if(cfg_pwm_enb[2]) digital_io_oen[9] = 1'b0;
- else if(cfg_spim_cs_enb[2]) digital_io_oen[9] = 1'b0;
- else if(cfg_port_d_dir_sel[6]) digital_io_oen[9] = 1'b0;
+ //Pin-11 PD5/WS[2]/SS[3]/OC0B(PWM1)/T1 digital_io[13]
+ if(cfg_strap_pad_ctrl) digital_io_oen[13] = 1'b1;
+ else if(cfg_pwm_enb[1]) digital_io_oen[13] = 1'b0;
+ else if(cfg_spim_cs_enb[3]) digital_io_oen[13] = 1'b0;
+ else if(cfg_port_d_port_type[5])digital_io_oen[13] = 1'b1;
+ else if(cfg_port_d_dir_sel[5]) digital_io_oen[13] = 1'b0;
- //Pin-13 PD7/A1N1 digital_io[10]/analog_io[3]
- if(cfg_port_d_dir_sel[7]) digital_io_oen[10] = 1'b0;
+ //Pin-12 PD6/SS[2]/OC0A(PWM2)/AIN0 digital_io[14] /analog_io[2]
+ if(cfg_strap_pad_ctrl) digital_io_oen[14] = 1'b1;
+ else if(cfg_pwm_enb[2]) digital_io_oen[14] = 1'b0;
+ else if(cfg_spim_cs_enb[2]) digital_io_oen[14] = 1'b0;
+ else if(cfg_port_d_port_type[6])digital_io_oen[14] = 1'b1;
+ else if(cfg_port_d_dir_sel[6]) digital_io_oen[14] = 1'b0;
+
+ //Pin-13 PD7/WS[2]/A1N1 digital_io[15]/analog_io[3]
+ if(cfg_strap_pad_ctrl) digital_io_oen[15] = 1'b1;
+ else if(cfg_port_d_port_type[7])digital_io_oen[15] = 1'b1;
+ else if(cfg_port_d_dir_sel[7]) digital_io_oen[15] = 1'b0;
- //Pin-14 PB0/CLKO/ICP1 digital_io[11]
- if(cfg_port_b_dir_sel[0]) digital_io_oen[11] = 1'b0;
+ //Pin-14 PB0/WS[2]/CLKO/ICP1 digital_io[16]
+ if(cfg_strap_pad_ctrl) digital_io_oen[16] = 1'b1;
+ else if(cfg_port_b_port_type[0])digital_io_oen[16] = 1'b1;
+ else if(cfg_port_b_dir_sel[0]) digital_io_oen[16] = 1'b0;
- //Pin-15 PB1/SS[1]/OC1A(PWM3) digital_io[12]
- if(cfg_pwm_enb[3]) digital_io_oen[12] = 1'b0;
- else if(cfg_spim_cs_enb[1]) digital_io_oen[12] = 1'b0;
- else if(cfg_port_b_dir_sel[1]) digital_io_oen[12] = 1'b0;
+ //Pin-15 PB1/WS[3]/SS[1]/OC1A(PWM3) digital_io[17]
+ if(cfg_strap_pad_ctrl) digital_io_oen[17] = 1'b1;
+ else if(cfg_pwm_enb[3]) digital_io_oen[17] = 1'b0;
+ else if(cfg_spim_cs_enb[1]) digital_io_oen[17] = 1'b0;
+ else if(cfg_port_b_port_type[1])digital_io_oen[17] = 1'b1;
+ else if(cfg_port_b_dir_sel[1]) digital_io_oen[17] = 1'b0;
- //Pin-16 PB2/SS[0]/OC1B(PWM4) digital_io[13]
- if(cfg_pwm_enb[4]) digital_io_oen[13] = 1'b0;
- else if(cfg_spim_cs_enb[0]) digital_io_oen[13] = 1'b0;
- else if(cfg_port_b_dir_sel[2]) digital_io_oen[13] = 1'b0;
+ //Pin-16 PB2/WS[3]/SS[0]/OC1B(PWM4) digital_io[18]
+ if(cfg_strap_pad_ctrl) digital_io_oen[18] = 1'b1;
+ else if(cfg_pwm_enb[4]) digital_io_oen[18] = 1'b0;
+ else if(cfg_spim_cs_enb[0]) digital_io_oen[18] = 1'b0;
+ else if(cfg_port_b_port_type[2])digital_io_oen[18] = 1'b1;
+ else if(cfg_port_b_dir_sel[2]) digital_io_oen[18] = 1'b0;
- //Pin-17 PB3/MOSI/OC2A(PWM5) digital_io[14]
- if(cfg_spim_enb) digital_io_oen[14] = 1'b1; // SPIM MOSI (Input)
- else if(cfg_pwm_enb[5]) digital_io_oen[14] = 1'b0;
- else if(cfg_port_b_dir_sel[3]) digital_io_oen[14] = 1'b0;
- else if(spis_boot) digital_io_oen[14] = 1'b0; // SPIS MISO (Output)
+ //Pin-17 PB3/WS[3]/MOSI/OC2A(PWM5) digital_io[19]
+ if(cfg_strap_pad_ctrl) digital_io_oen[19] = 1'b1;
+ else if(cfg_spim_enb) digital_io_oen[19] = 1'b1; // SPIM MOSI (Input)
+ else if(cfg_pwm_enb[5]) digital_io_oen[19] = 1'b0;
+ else if(cfg_port_b_port_type[3])digital_io_oen[19] = 1'b1;
+ else if(cfg_port_b_dir_sel[3]) digital_io_oen[19] = 1'b0;
+ else if(spis_boot) digital_io_oen[19] = 1'b0; // SPIS MISO (Output)
- //Pin-18 PB4/MISO digital_io[15]
- if(cfg_spim_enb) digital_io_oen[15] = 1'b0; // SPIM MISO (Output)
- else if(cfg_port_b_dir_sel[4]) digital_io_oen[15] = 1'b0;
- else if(spis_boot) digital_io_oen[15] = 1'b1; // SPIS MOSI (Input)
+ //Pin-18 PB4/WS[3]/MISO digital_io[20]
+ if(cfg_strap_pad_ctrl) digital_io_oen[20] = 1'b1;
+ else if(cfg_spim_enb) digital_io_oen[20] = 1'b0; // SPIM MISO (Output)
+ else if(cfg_port_b_port_type[4])digital_io_oen[20] = 1'b1;
+ else if(cfg_port_b_dir_sel[4]) digital_io_oen[20] = 1'b0;
+ else if(spis_boot) digital_io_oen[20] = 1'b1; // SPIS MOSI (Input)
- //Pin-19 PB5/SCK digital_io[16]
- if(cfg_spim_enb) digital_io_oen[16] = 1'b0; // SPIM SCK (Output)
- else if(cfg_port_b_dir_sel[5]) digital_io_oen[16] = 1'b0;
- else if(spis_boot) digital_io_oen[16] = 1'b1; // SPIS SCK (Input)
+ //Pin-19 PB5/SCK digital_io[21]
+ if(cfg_spim_enb) digital_io_oen[21] = 1'b0; // SPIM SCK (Output)
+ else if(cfg_port_b_dir_sel[5]) digital_io_oen[21] = 1'b0;
+ else if(spis_boot) digital_io_oen[21] = 1'b1; // SPIS SCK (Input)
- //Pin-23 PC0/ADC0 digital_io[18]/analog_io[11]
- if(cfg_port_c_dir_sel[0]) digital_io_oen[18] = 1'b0;
+ //Pin-23 PC0/MRXD/ADC0 digital_io[22]/analog_io[11]
+ if(cfg_muart_enb) digital_io_oen[22] = 1'b1;
+ else if(cfg_port_c_dir_sel[0]) digital_io_oen[22] = 1'b0;
- //Pin-24 PC1/ADC1 digital_io[19]/analog_io[12]
- if(cfg_port_c_dir_sel[1]) digital_io_oen[19] = 1'b0;
+ //Pin-24 PC1/MTXD/ADC1 digital_io[23]/analog_io[12]
+ if(cfg_muart_enb) digital_io_oen[23] = 1'b0;
+ if(cfg_port_c_dir_sel[1]) digital_io_oen[23] = 1'b0;
- //Pin-25 PC2/ADC2 digital_io[20]/analog_io[13]
- if(cfg_port_c_dir_sel[2]) digital_io_oen[20] = 1'b0;
+ //Pin-25 PC2/USB_DP/ADC2 digital_io[24]/analog_io[13]
+ if(cfg_usb_enb) digital_io_oen[24] = usb_oen;
+ else if(cfg_port_c_dir_sel[2]) digital_io_oen[24] = 1'b0;
- //Pin-26 PC3/ADC3 digital_io[21]/analog_io[14]
- if(cfg_port_c_dir_sel[3]) digital_io_oen[21] = 1'b0;
+ //Pin-26 PC3/USB_DN/ADC3 digital_io[25]/analog_io[14]
+ if(cfg_usb_enb) digital_io_oen[25] = usb_oen;
+ else if(cfg_port_c_dir_sel[3]) digital_io_oen[25] = 1'b0;
- //Pin-27 PC4/ADC4/SDA digital_io[22]/analog_io[15]
- if(cfg_i2cm_enb) digital_io_oen[22] = i2cm_data_oen;
- else if(cfg_port_c_dir_sel[4]) digital_io_oen[22] = 1'b0;
+ //Pin-27 PC4/ADC4/SDA digital_io[26]/analog_io[15]
+ if(cfg_i2cm_enb) digital_io_oen[26] = i2cm_data_oen;
+ else if(cfg_port_c_dir_sel[4]) digital_io_oen[26] = 1'b0;
- //Pin-28 PC5/ADC5/SCL digital_io[23]/analog_io[16]
- if(cfg_i2cm_enb) digital_io_oen[23] = i2cm_clk_oen;
- else if(cfg_port_c_dir_sel[5]) digital_io_oen[23] = 1'b0;
+ //Pin-28 PC5/ADC5/SCL digital_io[27]/analog_io[16]
+ if(cfg_i2cm_enb) digital_io_oen[27] = i2cm_clk_oen;
+ else if(cfg_port_c_dir_sel[5]) digital_io_oen[27] = 1'b0;
// Serial Flash
- digital_io_oen[24] = 1'b0 ;
- digital_io_oen[25] = 1'b0 ;
- digital_io_oen[26] = 1'b0 ;
- digital_io_oen[27] = 1'b0 ;
- digital_io_oen[28] = 1'b0 ;
- digital_io_oen[29] = sflash_oen[0];
- digital_io_oen[30] = sflash_oen[1];
- digital_io_oen[31] = sflash_oen[2];
- digital_io_oen[32] = sflash_oen[3];
+ if(cfg_strap_pad_ctrl) digital_io_oen[28] = 1'b1;
+ else digital_io_oen[28] = 1'b0;
+ if(cfg_strap_pad_ctrl) digital_io_oen[29] = 1'b1;
+ else digital_io_oen[29] = 1'b0;
+ if(cfg_strap_pad_ctrl) digital_io_oen[30] = 1'b1;
+ else digital_io_oen[30] = 1'b0;
+ if(cfg_strap_pad_ctrl) digital_io_oen[31] = 1'b1;
+ else digital_io_oen[31] = 1'b0;
+ if(cfg_strap_pad_ctrl) digital_io_oen[32] = 1'b1;
+ else digital_io_oen[32] = 1'b0;
+ if(cfg_strap_pad_ctrl) digital_io_oen[33] = 1'b1;
+ else digital_io_oen[33] = sflash_oen[0];
+ if(cfg_strap_pad_ctrl) digital_io_oen[34] = 1'b1;
+ else digital_io_oen[34] = sflash_oen[1];
+ if(cfg_strap_pad_ctrl) digital_io_oen[35] = 1'b1;
+ else digital_io_oen[35] = sflash_oen[2];
+ if(cfg_strap_pad_ctrl) digital_io_oen[36] = 1'b1;
+ else digital_io_oen[36] = sflash_oen[3];
// dbg_clk_mon
- digital_io_oen[33] = 1'b0 ;
- // UART MASTER
- digital_io_oen[34] = 1'b1; // RXD
- digital_io_oen[35] = 1'b0; // TXD
+ if(cfg_strap_pad_ctrl) digital_io_oen[37] = 1'b1;
+ else digital_io_oen[37] = 1'b0 ;
- // USB 1.1
- digital_io_oen[36] = usb_oen;
- digital_io_oen[37] = usb_oen;
+ if(cfg_port_a_dir_sel[0]) digital_io_oen[0] = 1'b0;
+ if(cfg_port_a_dir_sel[1]) digital_io_oen[1] = 1'b0;
+ if(cfg_port_a_dir_sel[2]) digital_io_oen[2] = 1'b0;
+ if(cfg_port_a_dir_sel[3]) digital_io_oen[3] = 1'b0;
+ if(cfg_port_a_dir_sel[4]) digital_io_oen[4] = 1'b0;
end
diff --git a/verilog/rtl/pinmux/src/pinmux_top.sv b/verilog/rtl/pinmux/src/pinmux_top.sv
index c84c1a7..d253eea 100755
--- a/verilog/rtl/pinmux/src/pinmux_top.sv
+++ b/verilog/rtl/pinmux/src/pinmux_top.sv
@@ -17,7 +17,7 @@
//
//////////////////////////////////////////////////////////////////////
//// ////
-//// Pinmux ////
+//// Pinmux ////
//// ////
//// This file is part of the riscduino cores project ////
//// https://github.com/dineshannayya/riscduino.git ////
@@ -45,21 +45,63 @@
//// 0.4 - 20 July 2022, Dinesh A ////
//// On Power On, If RESET* = 0, then system will enter ////
//// in to SPIS slave mode to support boot ////
+//// 0.5 Aug 5 2022, Dinesh A ////
+//// changes in sspim ////
+//// A. SPI Mode 0 to 3 support added, ////
+//// B. SPI Duplex mode TX-RX Mode added ////
+//// 0.6 Aug 15 2022, Dinesh A ////
+//// A. 15 Hardware Semahore added ////
+//// 0.7 - 24 Aug 2022, Dinesh A ////
+//// A. GPIO interrupt generation changed from 1 to 32 ////
+//// B. uart_master disable option added ////
+//// C. Timer interrupt related clean-up ////
+//// D. 4x ws281x driver logic added ////
+//// E. 4x ws281x driver are mux with 16x gpio ////
+//// F. gpio type select the normal gpio vs ws281x ////
+//// 0.7 - 26th Aug 2022, Dinesh A ////
+//// As digitial-io[0-4] reserved at power up. ////
+//// A. to keep at least one uart access, ////
+//// we have moved UART_RXD[1] from io[3] to io[6] ////
+//// B. SPI Slave SSN move from io[0] to [7] ////
+//// C. Additional Mail Box Register added at addr 0xF ////
+//// D. Due to power on digitalio[0-4] access issue,we ////
+//// have moved arduino pin mapping from io 5 onward ////
+//// 0.8 - 1 Sept 2022, Dinesh A ////
+//// A. System strap implementation ////
+//// B. glbl address space increased from 16 to 32 ////
+//// C. software register address moved, 4 register will ////
+//// reset under power-on reset, 4 register will reset////
+//// system reset ////
//////////////////////////////////////////////////////////////////////
-
+`include "user_params.svh"
module pinmux_top (
`ifdef USE_POWER_PINS
- input logic vccd1,// User area 1 1.8V supply
- input logic vssd1,// User area 1 digital ground
+ input logic vccd1,// User area 1 1.8V supply
+ input logic vssd1,// User area 1 digital ground
`endif
// clock skew adjust
- input logic [3:0] cfg_cska_pinmux,
- input logic wbd_clk_int,
- output logic wbd_clk_pinmux,
+ input logic [3:0] cfg_cska_pinmux,
+ input logic wbd_clk_int,
+ output logic wbd_clk_pinmux,
// System Signals
// Inputs
- input logic mclk,
- input logic h_reset_n,
+ input logic mclk,
+ input logic e_reset_n , // external reset
+ input logic p_reset_n , // power-on reset
+ input logic s_reset_n , // soft reset
+
+ // to/from Global Reset FSM
+ input logic cfg_strap_pad_ctrl ,
+ input logic [31:0] system_strap ,
+ output logic [31:0] strap_sticky ,
+
+ input logic user_clock1 ,
+ input logic user_clock2 ,
+ input logic int_pll_clock ,
+ output logic xtal_clk ,
+
+ output logic usb_clk ,
+ output logic rtc_clk ,
// Global Reset control
output logic [1:0] cpu_core_rst_n ,
@@ -70,12 +112,12 @@
output logic i2cm_rst_n ,
output logic usb_rst_n ,
- output logic [15:0] cfg_riscv_ctrl,
+ output logic [15:0] cfg_riscv_ctrl,
// Reg Bus Interface Signal
input logic reg_cs,
input logic reg_wr,
- input logic [8:0] reg_addr,
+ input logic [9:0] reg_addr,
input logic [31:0] reg_wdata,
input logic [3:0] reg_be,
@@ -84,11 +126,11 @@
output logic reg_ack,
// Risc configuration
- output logic [15:0] irq_lines,
+ output logic [31:0] irq_lines,
output logic soft_irq,
output logic [2:0] user_irq,
- input logic usb_intr,
- input logic i2cm_intr,
+ input logic usb_intr,
+ input logic i2cm_intr,
// Digital IO
output logic [37:0] digital_io_out,
@@ -96,11 +138,11 @@
input logic [37:0] digital_io_in,
// SFLASH I/F
- input logic sflash_sck,
- input logic [3:0] sflash_ss,
- input logic [3:0] sflash_oen,
- input logic [3:0] sflash_do,
- output logic [3:0] sflash_di,
+ input logic sflash_sck,
+ input logic [3:0] sflash_ss,
+ input logic [3:0] sflash_oen,
+ input logic [3:0] sflash_do,
+ output logic [3:0] sflash_di,
// SSRAM I/F - Temp Masked
//input logic ssram_sck,
@@ -144,16 +186,18 @@
output logic uartm_rxd ,
input logic uartm_txd ,
- output logic pulse1m_mclk,
- output logic [31:0] pinmux_debug,
+ output logic pulse1m_mclk,
+ output logic [31:0] pinmux_debug,
- input logic dbg_clk_mon
+ input logic dbg_clk_mon
);
-logic sreset_n; // Sync Reset
+logic s_reset_ssn; // Sync Reset
+logic p_reset_ssn; // Sync Reset
+logic [15:0] pad_strap_in;
/* clock pulse */
//********************************************************
@@ -173,6 +217,7 @@
logic [5:0] pwm_wfm ;
+logic [31:0] gpio_intr ;
wire [31:0] cfg_gpio_dir_sel ;// decides on GPIO pin is I/P or O/P at pad level, 0 -> Input, 1 -> Output
wire [31:0] cfg_gpio_out_type ;// GPIO Type, Unused
wire [31:0] cfg_multi_func_sel ;// GPIO Multi function type
@@ -192,17 +237,19 @@
wire [31:0] gpio_int_event; // GPIO Interrupt indication
reg [1:0] ext_intr_in; // External PAD level interrupt
+logic [3:0] ws_txd ; // ws281x txd port
assign pinmux_debug = '0; // Todo: Need to fix
//------------------------------------------------------
// Register Map Decoding
-`define SEL_GLBL 3'b000 // GLOBAL REGISTER
-`define SEL_GPIO 3'b001 // GPIO REGISTER
-`define SEL_PWM 3'b010 // PWM REGISTER
-`define SEL_TIMER 3'b011 // TIMER REGISTER
-`define SEL_SEMA 3'b100 // SEMAPHORE REGISTER
+`define SEL_GLBL 3'b000 // GLOBAL REGISTER
+`define SEL_GPIO 3'b001 // GPIO REGISTER
+`define SEL_PWM 3'b010 // PWM REGISTER
+`define SEL_TIMER 3'b011 // TIMER REGISTER
+`define SEL_SEMA 3'b100 // SEMAPHORE REGISTER
+`define SEL_WS 3'b101 // WS281x REGISTER
//----------------------------------------
@@ -223,24 +270,29 @@
logic [15:0] reg_sema_rdata;
logic reg_sema_ack;
+logic [31:0] reg_ws_rdata;
+logic reg_ws_ack;
-assign reg_rdata = (reg_addr[8:6] == `SEL_GLBL) ? {reg_glbl_rdata} :
- (reg_addr[8:6] == `SEL_GPIO) ? {reg_gpio_rdata} :
- (reg_addr[8:6] == `SEL_PWM) ? {reg_pwm_rdata} :
- (reg_addr[8:6] == `SEL_TIMER) ? reg_timer_rdata :
- (reg_addr[8:6] == `SEL_SEMA) ? {16'h0,reg_sema_rdata} : 'h0;
+assign reg_rdata = (reg_addr[9:7] == `SEL_GLBL) ? {reg_glbl_rdata} :
+ (reg_addr[9:7] == `SEL_GPIO) ? {reg_gpio_rdata} :
+ (reg_addr[9:7] == `SEL_PWM) ? {reg_pwm_rdata} :
+ (reg_addr[9:7] == `SEL_TIMER) ? reg_timer_rdata :
+ (reg_addr[9:7] == `SEL_SEMA) ? {16'h0,reg_sema_rdata} :
+ (reg_addr[9:7] == `SEL_WS) ? reg_ws_rdata : 'h0;
-assign reg_ack = (reg_addr[8:6] == `SEL_GLBL) ? reg_glbl_ack :
- (reg_addr[8:6] == `SEL_GPIO) ? reg_gpio_ack :
- (reg_addr[8:6] == `SEL_PWM) ? reg_pwm_ack :
- (reg_addr[8:6] == `SEL_TIMER) ? reg_timer_ack :
- (reg_addr[8:6] == `SEL_SEMA) ? reg_sema_ack : 1'b0;
+assign reg_ack = (reg_addr[9:7] == `SEL_GLBL) ? reg_glbl_ack :
+ (reg_addr[9:7] == `SEL_GPIO) ? reg_gpio_ack :
+ (reg_addr[9:7] == `SEL_PWM) ? reg_pwm_ack :
+ (reg_addr[9:7] == `SEL_TIMER) ? reg_timer_ack :
+ (reg_addr[9:7] == `SEL_SEMA) ? reg_sema_ack :
+ (reg_addr[9:7] == `SEL_WS) ? reg_ws_ack : 1'b0;
-wire reg_glbl_cs = (reg_addr[8:6] == `SEL_GLBL) ? reg_cs : 1'b0;
-wire reg_gpio_cs = (reg_addr[8:6] == `SEL_GPIO) ? reg_cs : 1'b0;
-wire reg_pwm_cs = (reg_addr[8:6] == `SEL_PWM) ? reg_cs : 1'b0;
-wire reg_timer_cs = (reg_addr[8:6] == `SEL_TIMER)? reg_cs : 1'b0;
-wire reg_sema_cs = (reg_addr[8:6] == `SEL_SEMA) ? reg_cs : 1'b0;
+wire reg_glbl_cs = (reg_addr[9:7] == `SEL_GLBL) ? reg_cs : 1'b0;
+wire reg_gpio_cs = (reg_addr[9:7] == `SEL_GPIO) ? reg_cs : 1'b0;
+wire reg_pwm_cs = (reg_addr[9:7] == `SEL_PWM) ? reg_cs : 1'b0;
+wire reg_timer_cs = (reg_addr[9:7] == `SEL_TIMER)? reg_cs : 1'b0;
+wire reg_sema_cs = (reg_addr[9:7] == `SEL_SEMA) ? reg_cs : 1'b0;
+wire reg_ws_cs = (reg_addr[9:7] == `SEL_WS) ? reg_cs : 1'b0;
//---------------------------------------------------------------------
@@ -264,12 +316,20 @@
);
reset_sync u_rst_sync (
- .scan_mode (1'b0 ),
- .dclk (mclk ), // Destination clock domain
- .arst_n (h_reset_n ), // active low async reset
- .srst_n (sreset_n )
+ .scan_mode (1'b0 ),
+ .dclk (mclk ), // Destination clock domain
+ .arst_n (s_reset_n ), // active low async reset
+ .srst_n (s_reset_ssn )
);
+reset_sync u_prst_sync (
+ .scan_mode (1'b0 ),
+ .dclk (mclk ), // Destination clock domain
+ .arst_n (p_reset_n ), // active low async reset
+ .srst_n (p_reset_ssn )
+ );
+
+
//------------------------------------------------------------------
// Global Register
//------------------------------------------------------------------
@@ -277,7 +337,22 @@
// System Signals
// Inputs
.mclk (mclk ),
- .h_reset_n (sreset_n ),
+ .e_reset_n (e_reset_n ), // external reset
+ .p_reset_n (p_reset_ssn ), // power-on reset
+ .s_reset_n (s_reset_ssn ),
+
+ .pad_strap_in (pad_strap_in ),
+ .system_strap (system_strap ),
+ .strap_sticky (strap_sticky ),
+
+ .user_clock1 (user_clock1 ),
+ .user_clock2 (user_clock2 ),
+ .int_pll_clock (int_pll_clock ),
+ .xtal_clk (xtal_clk ),
+
+ .usb_clk (usb_clk ),
+ .rtc_clk (rtc_clk ),
+
.cpu_core_rst_n (cpu_core_rst_n ),
.cpu_intf_rst_n (cpu_intf_rst_n ),
@@ -294,7 +369,7 @@
// Reg read/write Interface Inputs
.reg_cs (reg_glbl_cs ),
.reg_wr (reg_wr ),
- .reg_addr (reg_addr[5:2] ),
+ .reg_addr (reg_addr[6:2] ),
.reg_wdata (reg_wdata ),
.reg_be (reg_be ),
@@ -324,7 +399,7 @@
// System Signals
// Inputs
.mclk ( mclk ),
- .h_reset_n (h_reset_n ),
+ .h_reset_n (s_reset_ssn ),
// Reg Bus Interface Signal
.reg_cs (reg_gpio_cs ),
@@ -338,6 +413,7 @@
.reg_ack (reg_gpio_ack ),
+ .cfg_gpio_out_type (cfg_gpio_out_type ),
.cfg_gpio_dir_sel (cfg_gpio_dir_sel ),
.pad_gpio_in (pad_gpio_in ),
.pad_gpio_out (pad_gpio_out ),
@@ -354,7 +430,7 @@
// System Signals
// Inputs
.mclk ( mclk ),
- .h_reset_n (h_reset_n ),
+ .h_reset_n (s_reset_ssn ),
// Reg Bus Interface Signal
.reg_cs (reg_pwm_cs ),
@@ -378,8 +454,8 @@
timer_top u_timer(
// System Signals
// Inputs
- .mclk ( mclk ),
- .h_reset_n (h_reset_n ),
+ .mclk (mclk ),
+ .h_reset_n (s_reset_ssn ),
// Reg Bus Interface Signal
.reg_cs (reg_timer_cs ),
@@ -403,7 +479,7 @@
// System Signals
// Inputs
.mclk ( mclk ),
- .h_reset_n (h_reset_n ),
+ .h_reset_n (s_reset_ssn ),
// Reg Bus Interface Signal
.reg_cs (reg_sema_cs ),
@@ -417,14 +493,45 @@
.reg_ack (reg_sema_ack )
);
+//-----------------------------------------------------------------------
+// 4 Port ws281x driver
+//----------------------------------------------------------------------
+
+ws281x_top u_ws281x(
+ .mclk (mclk ),
+ .h_reset_n (s_reset_ssn ),
+
+ .reg_cs (reg_ws_cs ),
+ .reg_wr (reg_wr ),
+ .reg_addr (reg_addr[5:2] ),
+ .reg_wdata (reg_wdata ),
+ .reg_be (reg_be ),
+
+ .reg_rdata (reg_ws_rdata ),
+ .reg_ack (reg_ws_ack ),
+
+ .txd (ws_txd )
+
+ );
+
+
+
+//----------------------------------------------------------------------
+// Pinmux
+//----------------------------------------------------------------------
pinmux u_pinmux (
+ .cfg_strap_pad_ctrl (cfg_strap_pad_ctrl ),
+ .pad_strap_in (pad_strap_in ),
// Digital IO
.digital_io_out (digital_io_out ),
.digital_io_oen (digital_io_oen ),
.digital_io_in (digital_io_in ),
+ .xtal_clk (xtal_clk ),
+
// Config
+ .cfg_gpio_out_type (cfg_gpio_out_type ),
.cfg_gpio_dir_sel (cfg_gpio_dir_sel ),
.cfg_multi_func_sel (cfg_multi_func_sel ),
@@ -474,10 +581,13 @@
// UART MASTER I/F
.uartm_rxd (uartm_rxd ),
- .uartm_txd (uartm_txd ),
+ .uartm_txd (uartm_txd ),
+
+ .ws_txd (ws_txd ),
.dbg_clk_mon (dbg_clk_mon )
+
);
endmodule
diff --git a/verilog/rtl/pinmux/src/strap_ctrl.sv b/verilog/rtl/pinmux/src/strap_ctrl.sv
new file mode 100644
index 0000000..643a6de
--- /dev/null
+++ b/verilog/rtl/pinmux/src/strap_ctrl.sv
@@ -0,0 +1,235 @@
+//////////////////////////////////////////////////////////////////////////////
+// SPDX-FileCopyrightText: 2021 , Dinesh Annayya
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+// SPDX-FileContributor: Created by Dinesh Annayya <dinesha@opencores.org>
+//
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// strap control ////
+//// ////
+//// This file is part of the riscduino cores project ////
+//// https://github.com/dineshannayya/riscduino.git ////
+//// ////
+//// Description ////
+//// Manages all the strap related func ////
+//// ////
+//// To Do: ////
+//// nothing ////
+//// ////
+//// Author(s): ////
+//// - Dinesh Annayya, dinesha@opencores.org ////
+//// ////
+//// Revision : ////
+//// 0.1 - 29th Aug 2022, Dinesh A ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+
+/*************************************************************************
+ This block control the system/soft/sticky strap generation
+
+expected Reset removal sequence
+
+ _________ __________________________________________________
+ | |
+e_reset_n |________________|
+
+ ________ ________________________________________
+ XXXXXXXXX |
+p_reset_n XXXXXXXXX__________________________|
+
+ ____________
+ XXXXXXXXX |
+clk_enb XXXXXXXXX_____________________________________________|
+
+ ____________
+ XXXXXXXXX |
+s_reset_n XXXXXXXXX________________________________________________________|
+
+pad_strap_in decoding
+ bit[1:0] - System Clock Source Selection for wbs/riscv
+ 00 - User clock1 (Default)
+ 01 - User clock2
+ 10 - Internal PLL
+ 11 - Xtal
+ bit[3:2] - Clock Division for wbs/riscv
+ 00 - 0 Div (Default)
+ 01 - 2 Div
+ 10 - 4 Div
+ 11 - 8 Div
+ bit [4] - uart master config control
+ 0 - load from LA
+ 1 - constant value based on system clock selection (Default)
+ bit [5] - QSPI SRAM Mode Selection
+ 1'b0 - Single (Default)
+ 1'b1 - Quad
+ bit [7:6] - QSPI Fash Mode Selection
+ 2'b00 - Single (Default)
+ 2'b01 - Double
+ 2'b10 - Quad
+ 2'b11 - QDDR
+ bit [8] - Riscv Reset control
+ 0 - Keep Riscv on Reset
+ 1 - Removed Riscv on Power On Reset (Default)
+ bit [9] - Riscv Cache Bypass
+ 0 - Cache Enable
+ 1 - Bypass cache (Default
+ bit [10] - Riscv SRAM clock edge selection
+ 0 - Normal
+ 1 - Invert (Default)
+ bit [12:11] - Skew selection
+ 2'b00 - Default value (Default
+ 2'b01 - Default value + 2
+ 2'b10 - Default value + 4
+ 2'b11 - Default value - 4
+ bit [14:13] - Reserved
+ bit [15] - Strap Mode
+ 0 - Normal
+ 1 - Pick Default Value
+
+system strap decoding
+ bit[1:0] - System Clock Source Selection for wbs
+ 00 - User clock1
+ 01 - User clock2
+ 10 - Internal PLL
+ 11 - Xtal
+ bit[3:2] - Clock Division for wbs
+ 00 - 0 Div
+ 01 - 2 Div
+ 10 - 4 Div
+ 11 - 8 Div
+ bit[5:4] - System Clock Source Selection for riscv
+ 00 - User clock1
+ 01 - User clock2
+ 10 - Internal PLL
+ 11 - Xtal
+ bit[7:6] - Clock Division for riscv
+ 00 - 0 Div
+ 01 - 2 Div
+ 10 - 4 Div
+ 11 - 8 Div
+ bit [8] - uart master config control
+ 0 - load from LA
+ 1 - constant value based on system clock selection
+ bit [9] - QSPI SRAM Mode Selection CS#2
+ 1'b0 - Single
+ 1'b1 - Quad
+ bit [11:10] - QSPI FLASH Mode Selection CS#0
+ 2'b00 - Single
+ 2'b01 - Double
+ 2'b10 - Quad
+ 2'b11 - QDDR
+ bit [12] - Riscv Reset control
+ 0 - Keep Riscv on Reset
+ 1 - Removed Riscv on Power On Reset
+ bit [13] - Riscv Cache Bypass
+ 1 - Cache Enable
+ 0 - Bypass cache
+ bit [14] - Riscv SRAM clock edge selection
+ 0 - Normal
+ 1 - Invert
+
+ bit [15] - Soft Reboot Request
+ bit [17:16] - cfg_cska_wi Skew selection
+ bit [19:18] - cfg_cska_wh Skew selection
+ bit [21:20] - cfg_cska_riscv Skew selection
+ bit [23:22] - cfg_cska_qspi Skew selection
+ bit [25:24] - cfg_cska_uart Skew selection
+ bit [27:26] - cfg_cska_pinmux Skew selection
+ bit [29:28] - cfg_cska_qspi_co Skew selection
+
+**************************************************************************/
+module strap_ctrl (
+
+ input logic clk ,
+ input logic e_reset_n , // external reset
+ input logic p_reset_n , // power-on reset
+ input logic s_reset_n , // soft reset
+
+ input logic [15:0] pad_strap_in , // strap from pad
+ //List of Inputs
+ input logic cs ,
+ input logic [3:0] we ,
+ input logic [31:0] data_in ,
+
+ //List of Outs
+ output logic [15:0] strap_latch ,
+ output logic [31:0] strap_sticky
+
+ );
+
+
+//---------------------------------------------
+// Strap Mapping
+//----------------------------------------------
+logic [31:0] strap_map;
+logic [14:0] pstrap_select;
+
+// Pad Strap selection based on strap mode
+assign pstrap_select = (strap_latch[15] == 1'b1) ? PSTRAP_DEFAULT_VALUE : strap_latch[14:0];
+
+assign strap_map = {
+ 1'b0 , // bit[31] - Soft Reboot Request - Need to double sync to local clock
+ 1'b0 , // bit[30] - reserved
+ pstrap_select[12:11] , // bit[29:28] - cfg_cska_qspi_co Skew selection
+ pstrap_select[12:11] , // bit[27:26] - cfg_cska_pinmux Skew selection
+ pstrap_select[12:11] , // bit[25:24] - cfg_cska_uart Skew selection
+ pstrap_select[12:11] , // bit[23:22] - cfg_cska_qspi Skew selection
+ pstrap_select[12:11] , // bit[21:20] - cfg_cska_riscv Skew selection
+ pstrap_select[12:11] , // bit[19:18] - cfg_cska_wh Skew selection
+ pstrap_select[12:11] , // bit[17:16] - cfg_cska_wi Skew selection
+ 1'b0 , // bit[15] - Reserved
+ pstrap_select[10] , // bit[14] - Riscv SRAM clock edge selection
+ pstrap_select[9] , // bit[13] - Riscv Cache Bypass
+ pstrap_select[8] , // bit[12] - Riscv Reset control
+ pstrap_select[7:6] , // bit[11:10] - QSPI FLASH Mode Selection CS#0
+ pstrap_select[5] , // bit[9] - QSPI SRAM Mode Selection CS#2
+ pstrap_select[4] , // bit[8] - uart master config control
+ pstrap_select[3:2] , // bit[7:6] - riscv clock div
+ pstrap_select[1:0] , // bit[5:4] - riscv clock source sel
+ pstrap_select[3:2] , // bit[3:2] - wbs clock division
+ pstrap_select[1:0] // bit[1:0] - wbs clock source sel
+ };
+
+//------------------------------------
+// Generating strap latch
+//------------------------------------
+always_latch begin
+ if ( ~e_reset_n )
+ begin
+ strap_latch = pad_strap_in[15:0];
+ end
+end
+
+//--------------------------------------------
+// Software controller Strap Register
+//--------------------------------------------
+
+
+always @ (posedge clk or negedge e_reset_n) begin
+ if(e_reset_n == 1'b0) begin
+ strap_sticky <= 'h0 ;
+ end else if (p_reset_n == 1'b0) begin
+ strap_sticky <= strap_map ;
+ end else if(s_reset_n == 1'b0) begin
+ strap_sticky[`STRAP_SOFT_REBOOT_REQ] <= 1'b0;
+ end else begin
+ if(cs && we[0]) strap_sticky[7:0] <= data_in[7:0];
+ if(cs && we[1]) strap_sticky[15:8] <= data_in[15:8];
+ if(cs && we[2]) strap_sticky[23:16] <= data_in[23:16];
+ if(cs && we[3]) strap_sticky[31:24] <= data_in[31:24];
+ end
+end
+
+endmodule
diff --git a/verilog/rtl/pinmux/src/timer_reg.sv b/verilog/rtl/pinmux/src/timer_reg.sv
index cd48587..1a561f6 100644
--- a/verilog/rtl/pinmux/src/timer_reg.sv
+++ b/verilog/rtl/pinmux/src/timer_reg.sv
@@ -56,8 +56,7 @@
output logic [2:0] cfg_timer_update , // CPU write to timer register
output logic [18:0] cfg_timer0 , // Timer-0 register
output logic [18:0] cfg_timer1 , // Timer-1 register
- output logic [18:0] cfg_timer2 , // Timer-2 register
- output logic [2:0] timer_intr
+ output logic [18:0] cfg_timer2 // Timer-2 register
);
diff --git a/verilog/rtl/pinmux/src/timer_top.sv b/verilog/rtl/pinmux/src/timer_top.sv
index ae981dc..127d62f 100644
--- a/verilog/rtl/pinmux/src/timer_top.sv
+++ b/verilog/rtl/pinmux/src/timer_top.sv
@@ -132,7 +132,7 @@
timer u_timer_0
(
- .reset_n (sreset_n ),// system syn reset
+ .reset_n (h_reset_n ),// system syn reset
.mclk (mclk ),// master clock
.pulse_1us (pulse_1us ),
.pulse_1ms (pulse_1ms ),
@@ -152,7 +152,7 @@
wire [15:0] cfg_timer1_compare = cfg_timer1[15:0];
timer u_timer_1
(
- .reset_n (sreset_n ),// system syn reset
+ .reset_n (h_reset_n ),// system syn reset
.mclk (mclk ),// master clock
.pulse_1us (pulse_1us ),
.pulse_1ms (pulse_1ms ),
@@ -173,7 +173,7 @@
timer u_timer_2
(
- .reset_n (sreset_n ),// system syn reset
+ .reset_n (h_reset_n ),// system syn reset
.mclk (mclk ),// master clock
.pulse_1us (pulse_1us ),
.pulse_1ms (pulse_1ms ),
diff --git a/verilog/rtl/pinmux/src/ws281x_driver.sv b/verilog/rtl/pinmux/src/ws281x_driver.sv
new file mode 100644
index 0000000..9974a83
--- /dev/null
+++ b/verilog/rtl/pinmux/src/ws281x_driver.sv
@@ -0,0 +1,110 @@
+
+// 24 bit ws281x led driver
+
+module ws281x_driver (
+ input logic clk , // Clock input.
+ input logic reset_n , // Resets the internal state of the driver
+
+ input logic[15:0] cfg_reset_period , // Reset period interm of clk
+ input logic [9:0] cfg_clk_period , // Total bit clock period
+ input logic [9:0] cfg_th0_period , // bit-0 drive low period
+ input logic [9:0] cfg_th1_period , // bit-1 drive low period
+
+ input logic port_enb ,
+ input logic data_available ,
+ input logic [7:0] green_in , // 8-bit green data
+ input logic [7:0] red_in , // 8-bit red data
+ input logic [7:0] blue_in , // 8-bit blue data
+ output logic data_rd , // data read
+
+ output logic txd // Signal to send to WS2811 chain.
+ );
+
+
+ parameter STATE_RESET = 1'd0;
+ parameter STATE_TRANSMIT = 1'd1;
+ /////////////////////////////////////////////////////////////
+ // Timing parameters for the WS2811 //
+ // The LEDs are reset by driving D0 low for at least 50us. //
+ // Data is transmitted using a 800kHz signal. //
+ // A '1' is 50% duty cycle, a '0' is 20% duty cycle. //
+ /////////////////////////////////////////////////////////////
+
+ reg [15:0] clk_cnt ; // Clock divider for a cycle
+ reg state ; // FSM state
+ reg [23:0] led_data ; // Current byte to send
+ reg [4:0] bit_cnt ; // Current bit index to send
+
+
+
+
+ always @ (posedge clk or negedge reset_n) begin
+ if (reset_n == 1'b0) begin
+ state <= STATE_RESET;
+ txd <= 0;
+ data_rd <= 0;
+ bit_cnt <= 23;
+ clk_cnt <= 0;
+ led_data <= 0;
+ end
+ else begin
+ case (state)
+ STATE_RESET: begin
+ if(port_enb) begin
+ if (clk_cnt == cfg_reset_period) begin
+ if(data_available) begin
+ led_data <= {green_in,red_in,blue_in};
+ bit_cnt <= 23;
+ clk_cnt <= 0;
+ txd <= 1;
+ data_rd <= 1;
+ state <= STATE_TRANSMIT;
+ end
+ end
+ else begin
+ // De-assert txd , and wait for 75 us.
+ txd <= 0;
+ clk_cnt <= clk_cnt + 1;
+ end
+ end else begin
+ txd <= 0;
+ clk_cnt <= 0;
+ end
+ end // case: STATE_RESET
+ STATE_TRANSMIT: begin
+ // Advance cycle counter
+ if (clk_cnt == cfg_clk_period) begin
+ txd <= 1;
+ clk_cnt <= 'h0;
+ if (bit_cnt != 0) begin
+ bit_cnt <= bit_cnt -1;
+ // Start sending next bit of data
+ led_data <= {led_data [22:0], 1'b0};
+ end else begin
+ if(data_available) begin // if new data available
+ led_data <= {green_in,red_in,blue_in};
+ bit_cnt <= 23;
+ data_rd <= 1;
+ end else begin
+ state <= STATE_RESET;
+ end
+
+ end
+ end else begin
+ data_rd <= 0;
+ // De-assert txd after a certain amount of time, depending on if you're transmitting a 1 or 0.
+ if (led_data[23] == 0 && clk_cnt >= cfg_th0_period) begin
+ txd <= 0;
+ end
+ else if (led_data[23] == 1 && clk_cnt >= cfg_th1_period) begin
+ txd <= 0;
+ end
+ clk_cnt <= clk_cnt + 1;
+ end
+ end
+ endcase
+ end
+ end
+
+endmodule
+
diff --git a/verilog/rtl/pinmux/src/ws281x_reg.sv b/verilog/rtl/pinmux/src/ws281x_reg.sv
new file mode 100644
index 0000000..31f25c1
--- /dev/null
+++ b/verilog/rtl/pinmux/src/ws281x_reg.sv
@@ -0,0 +1,278 @@
+//////////////////////////////////////////////////////////////////////////////
+// SPDX-FileCopyrightText: 2021 , Dinesh Annayya
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+// SPDX-FileContributor: Created by Dinesh Annayya <dinesha@opencores.org>
+//
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// ws281x Register ////
+//// ////
+//// This file is part of the riscduino cores project ////
+//// https://github.com/dineshannayya/riscduino.git ////
+//// ////
+//// Description ////
+//// Manages the 4x ws281x driver register ////
+//// ////
+//// To Do: ////
+//// nothing ////
+//// ////
+//// Author(s): ////
+//// - Dinesh Annayya, dinesha@opencores.org ////
+//// ////
+//// Revision : ////
+//// 0.1 - 23rd Aug 2022, Dinesh A ////
+//// initial version ////
+//////////////////////////////////////////////////////////////////////
+
+
+module ws281x_reg #( parameter NP = 2, // Number of PORT
+ parameter DW = 32, // DATA WIDTH
+ parameter AW = 4, // ADDRESS WIDTH
+ parameter BW = 4 // BYTE WIDTH
+ ) (
+ // System Signals
+ // Inputs
+ input logic mclk ,
+ input logic h_reset_n ,
+
+ // Reg Bus Interface Signal
+ input logic reg_cs ,
+ input logic reg_wr ,
+ input logic [AW-1:0] reg_addr ,
+ input logic [DW-1:0] reg_wdata ,
+ input logic [BW-1:0] reg_be ,
+
+ // Outputs
+ output logic [DW-1:0] reg_rdata ,
+ output logic reg_ack ,
+
+ output logic[15:0] cfg_reset_period , // Reset period interm of clk
+ output logic [9:0] cfg_clk_period , // Total bit clock period
+ output logic [9:0] cfg_th0_period , // bit-0 drive low period
+ output logic [9:0] cfg_th1_period , // bit-1 drive low period
+
+ // wd281x port-0 data
+ output logic port0_enb ,
+ input logic port0_rd ,
+ output logic [23:0] port0_data ,
+ output logic port0_dval ,
+
+ // wd281x port-1 data
+ output logic port1_enb ,
+ input logic port1_rd ,
+ output logic [23:0] port1_data ,
+ output logic port1_dval
+
+ //// wd281x port-2 data
+ //output logic port2_enb ,
+ //input logic port2_rd ,
+ //output logic [23:0] port2_data ,
+ //output logic port2_dval ,
+
+ //// wd281x port-3 data
+ //output logic port3_enb ,
+ //input logic port3_rd ,
+ //output logic [23:0] port3_data ,
+ //output logic port3_dval
+
+
+ );
+
+//-----------------------------------------------------------------------
+// Internal Wire Declarations
+//-----------------------------------------------------------------------
+
+logic sw_rd_en ;
+logic sw_wr_en ;
+logic [AW-1:0] sw_addr ;
+logic [DW-1:0] sw_reg_wdata ;
+logic [BW-1:0] sw_be ;
+
+logic [DW-1:0] reg_out ;
+logic [DW-1:0] reg_0 ;
+logic [DW-1:0] reg_1 ;
+logic [DW-1:0] reg_2 ;
+logic [DW-1:0] reg_3 ;
+
+logic [NP-1:0] fifo_full ;
+logic [NP-1:0] fifo_empty ;
+logic [NP-1:0] fifo_wr ;
+logic [NP-1:0] fifo_rd ;
+logic [23:0] fifo_rdata[0:NP-1] ;
+logic [NP-1:0] port_op_done ;
+
+assign sw_addr = reg_addr;
+assign sw_be = reg_be;
+assign sw_rd_en = reg_cs & !reg_wr;
+assign sw_wr_en = reg_cs & reg_wr;
+assign sw_reg_wdata = reg_wdata;
+
+//-----------------------------------------------------------------------
+// register read enable and write enable decoding logic
+//-----------------------------------------------------------------------
+wire sw_wr_en_0 = sw_wr_en & (sw_addr == 4'h0);
+wire sw_wr_en_1 = sw_wr_en & (sw_addr == 4'h1);
+wire sw_wr_en_2 = sw_wr_en & (sw_addr == 4'h2);
+wire sw_wr_en_3 = sw_wr_en & (sw_addr == 4'h3);
+wire sw_wr_en_4 = sw_wr_en & (sw_addr == 4'h4) & !fifo_full[0]; // Write only if fifo is not full
+wire sw_wr_en_5 = sw_wr_en & (sw_addr == 4'h5) & !fifo_full[1]; // Write only if fifo is not full
+wire sw_wr_en_6 = sw_wr_en & (sw_addr == 4'h6) & !fifo_full[2]; // Write only if fifo is not full
+wire sw_wr_en_7 = sw_wr_en & (sw_addr == 4'h7) & !fifo_full[3]; // Write only if fifo is not full
+
+
+// Generated seperate write enable case to block the reg ack duration when fifo is full
+wire sw_wr_en_t = sw_wr_en_0 | sw_wr_en_1 | sw_wr_en_2 | sw_wr_en_3 | sw_wr_en_4 | sw_wr_en_5 | sw_wr_en_6 | sw_wr_en_7;
+
+
+always @ (posedge mclk or negedge h_reset_n)
+begin : preg_out_Seq
+ if (h_reset_n == 1'b0) begin
+ reg_rdata <= 'h0;
+ reg_ack <= 1'b0;
+ end else if (reg_cs && !reg_ack && sw_rd_en) begin
+ reg_rdata <= reg_out[DW-1:0] ;
+ reg_ack <= 1'b1;
+ end else if (reg_cs && !reg_ack && sw_wr_en_t) begin // Block Ack generation when FIFO is full
+ reg_ack <= 1'b1;
+ end else begin
+ reg_ack <= 1'b0;
+ end
+end
+
+//----------------------------------------
+// Hardware Command Register
+// Assumption: Maximum 32 port assumed
+//----------------------------------------
+
+assign port0_enb = reg_0[0];
+assign port1_enb = reg_0[1];
+//assign port2_enb = reg_0[2];
+//assign port3_enb = reg_0[3];
+
+ generic_register #(.WD(4)) u_reg_0(
+ //List of Inputs
+ .we ({4{sw_wr_en_0 &
+ sw_be[0] }}),
+ .data_in (sw_reg_wdata[3:0]),
+ .reset_n (h_reset_n ),
+ .clk (mclk ),
+
+ //List of Outs
+ .data_out (reg_0[3:0] )
+ );
+
+// CONFIG-0
+assign cfg_reset_period = reg_1[15:0];
+gen_16b_reg #(32'h0) u_reg_1 (
+ //List of Inputs
+ .reset_n (h_reset_n ),
+ .clk (mclk ),
+ .cs (sw_wr_en_1 ),
+ .we (sw_be[1:0] ),
+ .data_in (sw_reg_wdata[15:0] ),
+
+ //List of Outs
+ .data_out (reg_1[15:0] )
+ );
+
+// CONFIG-1
+
+assign cfg_th1_period = reg_2[29:20]; // High Exit Period for Data-1
+assign cfg_th0_period = reg_2[19:10]; // High Exit period for Data-0
+assign cfg_clk_period = reg_2[9:0];
+
+gen_32b_reg #(32'h0) u_reg_2 (
+ //List of Inputs
+ .reset_n (h_reset_n ),
+ .clk (mclk ),
+ .cs (sw_wr_en_2 ),
+ .we (sw_be ),
+ .data_in (sw_reg_wdata ),
+
+ //List of Outs
+ .data_out (reg_2 )
+ );
+
+
+
+assign port0_dval =!fifo_empty[0];
+assign port1_dval =!fifo_empty[1];
+//assign port2_dval =!fifo_empty[2];
+//assign port3_dval =!fifo_empty[3];
+
+assign reg_3 = { 2'b00,fifo_empty[1],fifo_full[1],
+ 2'b00,fifo_empty[0],fifo_full[0]};
+
+
+//----------------------------------------------------
+// DATA FIFO
+//----------------------------------------------------
+
+assign fifo_wr[0] = sw_wr_en_4 & reg_ack;
+assign fifo_wr[1] = sw_wr_en_5 & reg_ack;
+//assign fifo_wr[2] = sw_wr_en_6 & reg_ack;
+//assign fifo_wr[3] = sw_wr_en_7 & reg_ack;
+
+assign fifo_rd[0] = port0_rd;
+assign fifo_rd[1] = port1_rd;
+//assign fifo_rd[2] = port2_rd;
+//assign fifo_rd[3] = port3_rd;
+
+assign port0_data = fifo_rdata[0];
+assign port1_data = fifo_rdata[1];
+//assign port2_data = fifo_rdata[2];
+//assign port3_data = fifo_rdata[3];
+
+genvar port;
+generate
+for (port = 0; $unsigned(port) < NP; port=port+1) begin : gfifo
+
+sync_fifo #(.W(24), .D(8)) u_fifo
+ (
+ .clk (mclk ),
+ .reset_n (h_reset_n ),
+ .wr_en (fifo_wr[port] ),
+ .wr_data (sw_reg_wdata[23:0] ),
+ .full (fifo_full[port] ),
+ .empty (fifo_empty[port] ),
+ .rd_en (fifo_rd[port] ),
+ .rd_data (fifo_rdata[port] )
+ );
+
+end
+endgenerate // gfifo
+
+
+//-----------------------------------------------------------------------
+// Register Read Path Multiplexer instantiation
+//-----------------------------------------------------------------------
+
+always_comb
+begin
+ reg_out [31:0] = 32'h0;
+
+ case (sw_addr [3:0])
+ 4'b0000 : reg_out [31:0] = reg_0 [31:0];
+ 4'b0001 : reg_out [31:0] = reg_1 [31:0];
+ 4'b0010 : reg_out [31:0] = reg_2 [31:0];
+ 4'b0011 : reg_out [31:0] = reg_3 [31:0];
+ 4'b0100 : reg_out [31:0] = port0_data;
+ 4'b0101 : reg_out [31:0] = port1_data;
+// 4'b0110 : reg_out [31:0] = port2_data;
+// 4'b0111 : reg_out [31:0] = port3_data;
+ default : reg_out [31:0] = 32'h0;
+ endcase
+end
+endmodule
diff --git a/verilog/rtl/pinmux/src/ws281x_top.sv b/verilog/rtl/pinmux/src/ws281x_top.sv
new file mode 100644
index 0000000..6ab06fa
--- /dev/null
+++ b/verilog/rtl/pinmux/src/ws281x_top.sv
@@ -0,0 +1,194 @@
+//////////////////////////////////////////////////////////////////////////////
+// SPDX-FileCopyrightText: 2021 , Dinesh Annayya
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+// SPDX-FileContributor: Created by Dinesh Annayya <dinesha@opencores.org>
+//
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// ws281x Top ////
+//// ////
+//// This file is part of the riscduino cores project ////
+//// https://github.com/dineshannayya/riscduino.git ////
+//// ////
+//// Description ////
+//// ////
+//// To Do: ////
+//// nothing ////
+//// ////
+//// Author(s): ////
+//// - Dinesh Annayya, dinesha@opencores.org ////
+//// ////
+//// Revision : ////
+//// 0.1 - 23rd Aug 2022, Dinesh A ////
+//// initial version ////
+//////////////////////////////////////////////////////////////////////
+
+module ws281x_top (
+ // System Signals
+ // Inputs
+ input logic mclk,
+ input logic h_reset_n,
+
+ // Reg Bus Interface Signal
+ input logic reg_cs,
+ input logic reg_wr,
+ input logic [3:0] reg_addr,
+ input logic [31:0] reg_wdata,
+ input logic [3:0] reg_be,
+
+ // Outputs
+ output logic [31:0] reg_rdata,
+ output logic reg_ack,
+
+ output logic [3:0] txd
+
+ );
+
+assign txd[2] = txd[0];
+assign txd[3] = txd[1];
+
+logic[15:0] cfg_reset_period ; // Reset period interm of clk
+logic [9:0] cfg_clk_period ; // Total bit clock period
+logic [9:0] cfg_th0_period ; // bit-0 drive low period
+logic [9:0] cfg_th1_period ; // bit-1 drive low period
+
+logic [23:0] port0_data ;
+logic [23:0] port1_data ;
+//logic [23:0] port2_data ;
+//logic [23:0] port3_data ;
+
+ws281x_reg u_reg (
+ .mclk ( mclk ),
+ .h_reset_n ( h_reset_n ),
+
+ .reg_cs ( reg_cs ),
+ .reg_wr ( reg_wr ),
+ .reg_addr ( reg_addr ),
+ .reg_wdata ( reg_wdata ),
+ .reg_be ( reg_be ),
+
+ .reg_rdata ( reg_rdata ),
+ .reg_ack ( reg_ack ),
+
+ .cfg_reset_period ( cfg_reset_period ), // Reset period interm of clk
+ .cfg_clk_period ( cfg_clk_period ), // Total bit clock period
+ .cfg_th0_period ( cfg_th0_period ), // bit-0 drive low period
+ .cfg_th1_period ( cfg_th1_period ), // bit-1 drive low period
+
+ .port0_enb ( port0_enb ),
+ .port0_rd ( port0_rd ),
+ .port0_data ( port0_data ),
+ .port0_dval ( port0_dval ),
+
+ .port1_enb ( port1_enb ),
+ .port1_rd ( port1_rd ),
+ .port1_data ( port1_data ),
+ .port1_dval ( port1_dval )
+
+ //.port2_enb ( port2_enb ),
+ //.port2_rd ( port2_rd ),
+ //.port2_data ( port2_data ),
+ //.port2_dval ( port2_dval ),
+
+ //.port3_enb ( port3_enb ),
+ //.port3_rd ( port3_rd ),
+ //.port3_data ( port3_data ),
+ //.port3_dval ( port3_dval )
+
+ );
+
+
+//wx281x port-0
+ws281x_driver u_txd_0(
+ .clk (mclk ), // Clock input.
+ .reset_n (h_reset_n ), // Resets the internal state of the driver
+
+ .cfg_reset_period (cfg_reset_period ), // Reset period interm of clk
+ .cfg_clk_period (cfg_clk_period ), // Total bit clock period
+ .cfg_th0_period (cfg_th0_period ), // bit-0 drive low period
+ .cfg_th1_period (cfg_th1_period ), // bit-1 drive low period
+
+ .port_enb (port0_enb ),
+ .data_available (port0_dval ),
+ .green_in (port0_data[23:16]), // 8-bit green data
+ .red_in (port0_data[15:8] ), // 8-bit red data
+ .blue_in (port0_data[7:0] ), // 8-bit blue data
+ .data_rd (port0_rd ), // data read
+
+ .txd (txd[0] ) // Signal to send to WS2811 chain.
+ );
+
+//wx281x port-1
+ws281x_driver u_txd_1(
+ .clk (mclk ), // Clock input.
+ .reset_n (h_reset_n ), // Resets the internal state of the driver
+
+ .cfg_reset_period (cfg_reset_period ), // Reset period interm of clk
+ .cfg_clk_period (cfg_clk_period ), // Total bit clock period
+ .cfg_th0_period (cfg_th0_period ), // bit-0 drive low period
+ .cfg_th1_period (cfg_th1_period ), // bit-1 drive low period
+
+ .port_enb (port1_enb ),
+ .data_available (port1_dval ),
+ .green_in (port1_data[23:16]), // 8-bit green data
+ .red_in (port1_data[15:8] ), // 8-bit red data
+ .blue_in (port1_data[7:0] ), // 8-bit blue data
+ .data_rd (port1_rd ), // data read
+
+ .txd (txd[1] ) // Signal to send to WS2811 chain.
+ );
+
+/***
+//wx281x port-2
+ws281x_driver u_txd_2(
+ .clk (mclk ), // Clock input.
+ .reset_n (h_reset_n ), // Resets the internal state of the driver
+
+ .cfg_reset_period (cfg_reset_period ), // Reset period interm of clk
+ .cfg_clk_period (cfg_clk_period ), // Total bit clock period
+ .cfg_th0_period (cfg_th0_period ), // bit-0 drive low period
+ .cfg_th1_period (cfg_th1_period ), // bit-1 drive low period
+
+ .port_enb (port2_enb ),
+ .data_available (port2_dval ),
+ .green_in (port2_data[23:16]), // 8-bit green data
+ .red_in (port2_data[15:8] ), // 8-bit red data
+ .blue_in (port2_data[7:0] ), // 8-bit blue data
+ .data_rd (port2_rd ), // data read
+
+ .txd (txd[2] ) // Signal to send to WS2811 chain.
+ );
+
+//wx281x port-3
+ws281x_driver u_txd_3(
+ .clk (mclk ), // Clock input.
+ .reset_n (h_reset_n ), // Resets the internal state of the driver
+
+ .cfg_reset_period (cfg_reset_period ), // Reset period interm of clk
+ .cfg_clk_period (cfg_clk_period ), // Total bit clock period
+ .cfg_th0_period (cfg_th0_period ), // bit-0 drive low period
+ .cfg_th1_period (cfg_th1_period ), // bit-1 drive low period
+
+ .port_enb (port3_enb ),
+ .data_available (port3_dval ),
+ .green_in (port3_data[23:16]), // 8-bit green data
+ .red_in (port3_data[15:8] ), // 8-bit red data
+ .blue_in (port3_data[7:0] ), // 8-bit blue data
+ .data_rd (port3_rd ), // data read
+
+ .txd (txd[3] ) // Signal to send to WS2811 chain.
+ );
+***/
+endmodule
diff --git a/verilog/rtl/qspim b/verilog/rtl/qspim
index 201a604..ee4d23b 160000
--- a/verilog/rtl/qspim
+++ b/verilog/rtl/qspim
@@ -1 +1 @@
-Subproject commit 201a6047f18db8ec792d948a52327b070013ab53
+Subproject commit ee4d23bb8a6edf84545f1aa0ba5db083d12440d7
diff --git a/verilog/rtl/uart/src/uart_rxfsm.sv b/verilog/rtl/uart/src/uart_rxfsm.sv
index 58916e6..7129b9c 100644
--- a/verilog/rtl/uart/src/uart_rxfsm.sv
+++ b/verilog/rtl/uart/src/uart_rxfsm.sv
@@ -36,6 +36,8 @@
//// 1. initial version picked from ////
//// http://www.opencores.org/cores/oms8051mini ////
//// ////
+//// 0.2 - 1st Sept 2022, Dinesh A ////
+//// 1. Moved the Fifo Write to last stop phase ////
//////////////////////////////////////////////////////////////////////
//// ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG ////
@@ -140,6 +142,7 @@
offset <= offset + 1;
case(rxstate)
idle_st : begin
+ fifo_wr <= 0;
if(!si) begin // Start indication
if(fifo_aval && cfg_rx_enable) begin
rxstate <= xfr_start;
@@ -171,7 +174,6 @@
fifo_data[cnt] <= si;
cnt <= cnt+1;
if(cnt == 7) begin
- fifo_wr <= 1;
if(cfg_pri_mod == 2'b00) // No Priority
rxstate <= xfr_stop_st1;
else rxstate <= xfr_pri_st;
@@ -179,7 +181,6 @@
end
end
xfr_pri_st : begin
- fifo_wr <= 0;
if(rxpos == offset) begin
if(cfg_pri_mod == 2'b10) // even priority
if( si != ^fifo_data) error_ind <= 2'b10;
@@ -189,21 +190,24 @@
end
end
xfr_stop_st1 : begin
- fifo_wr <= 0;
if(rxpos == offset) begin
if(si) begin
if(cfg_stop_bit) // Two Stop bit
rxstate <= xfr_stop_st2;
- else
+ else begin
+ fifo_wr <= 1;
rxstate <= idle_st;
+ end
end else begin // Framing error
error_ind <= 2'b01;
+ fifo_wr <= 1;
rxstate <= idle_st;
end
end
end
xfr_stop_st2 : begin
if(rxpos == offset) begin
+ fifo_wr <= 1;
if(si) begin
rxstate <= idle_st;
end else begin // Framing error
diff --git a/verilog/rtl/user_defines.v b/verilog/rtl/user_defines.v
new file mode 100644
index 0000000..1e2cb90
--- /dev/null
+++ b/verilog/rtl/user_defines.v
@@ -0,0 +1,87 @@
+// SPDX-FileCopyrightText: 2020 Efabless Corporation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// SPDX-License-Identifier: Apache-2.0
+
+`default_nettype none
+
+`ifndef __USER_DEFINES_H
+// User GPIO initial configuration parameters
+`define __USER_DEFINES_H
+
+// Useful GPIO mode values. These match the names used in defs.h.
+`define GPIO_MODE_MGMT_STD_INPUT_NOPULL 13'h0403
+`define GPIO_MODE_MGMT_STD_INPUT_PULLDOWN 13'h0803
+`define GPIO_MODE_MGMT_STD_INPUT_PULLUP 13'h0c03
+`define GPIO_MODE_MGMT_STD_OUTPUT 13'h1809
+`define GPIO_MODE_MGMT_STD_BIDIRECTIONAL 13'h1801
+`define GPIO_MODE_MGMT_STD_ANALOG 13'h000b
+
+`define GPIO_MODE_USER_STD_INPUT_NOPULL 13'h0402
+`define GPIO_MODE_USER_STD_INPUT_PULLDOWN 13'h0802
+`define GPIO_MODE_USER_STD_INPUT_PULLUP 13'h0c02
+`define GPIO_MODE_USER_STD_OUTPUT 13'h1808
+`define GPIO_MODE_USER_STD_BIDIRECTIONAL 13'h1800
+`define GPIO_MODE_USER_STD_OUT_MONITORED 13'h1802
+`define GPIO_MODE_USER_STD_ANALOG 13'h000a
+
+// The power-on configuration for GPIO 0 to 4 is fixed and cannot be
+// modified (allowing the SPI and debug to always be accessible unless
+// overridden by a flash program).
+
+// The values below can be any of the standard types defined above,
+// or they can be any 13-bit value if the user wants a non-standard
+// startup state for the GPIO. By default, every GPIO from 5 to 37
+// is set to power up as an input controlled by the management SoC.
+// Users may want to redefine these so that the user project powers
+// up in a state that can be used immediately without depending on
+// the management SoC to run a startup program to configure the GPIOs.
+
+`define USER_CONFIG_GPIO_5_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL // UART_TXD[1]
+`define USER_CONFIG_GPIO_6_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL // UART_RXD[1]
+`define USER_CONFIG_GPIO_7_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_8_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_9_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_10_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_11_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_12_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_13_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_14_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+
+// Configurations of GPIO 15 to 25 are used on caravel but not caravan.
+`define USER_CONFIG_GPIO_15_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_16_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_17_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_18_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_19_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_20_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_21_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_22_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_23_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_24_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_25_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+
+`define USER_CONFIG_GPIO_26_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_27_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_28_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_29_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_30_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_31_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_32_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_33_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_34_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_35_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_36_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+`define USER_CONFIG_GPIO_37_INIT `GPIO_MODE_USER_STD_BIDIRECTIONAL
+
+`endif // __USER_DEFINES_H
diff --git a/verilog/rtl/user_params.svh b/verilog/rtl/user_params.svh
new file mode 100644
index 0000000..7664338
--- /dev/null
+++ b/verilog/rtl/user_params.svh
@@ -0,0 +1,150 @@
+`ifndef USER_PARMS
+`define USER_PARMS
+
+// ASCI Representation of RISC = 32'h8273_8343
+parameter CHIP_SIGNATURE = 32'h8273_8343;
+// Software Reg-1, Release date: <DAY><MONTH><YEAR>
+parameter CHIP_RELEASE_DATE = 32'h0309_2022;
+// Software Reg-2: Poject Revison 5.1 = 0005200
+parameter CHIP_REVISION = 32'h0005_3000;
+
+parameter SKEW_RESET_VAL = 32'b0000_0000_1000_0111_1001_1000_1001_1000;
+
+parameter PSTRAP_DEFAULT_VALUE = 15'b000_0111_1011_0000;
+
+/*****************************************************
+pad_strap_in decoding
+ bit[1:0] - System Clock Source Selection for wbs/riscv
+ 00 - User clock1 (Default)
+ 01 - User clock2
+ 10 - Internal PLL
+ 11 - Xtal
+ bit[3:2] - Clock Division for wbs/riscv
+ 00 - 0 Div (Default)
+ 01 - 2 Div
+ 10 - 4 Div
+ 11 - 8 Div
+ bit [4] - uart master config control
+ 0 - load from LA
+ 1 - constant value based
+ on system clock selection (Default)
+ bit [5] - QSPI SRAM Mode Selection
+ 1'b0 - Single
+ 1'b1 - Quad (Default)
+ bit [7:6] - QSPI Fash Mode Selection
+ 2'b00 - Single
+ 2'b01 - Double
+ 2'b10 - Quad (Default
+ 2'b11 - QDDR
+ bit [8] - Riscv Reset control
+ 0 - Keep Riscv on Reset
+ 1 - Removed Riscv on Power On Reset (Default)
+ bit [9] - Riscv Cache Bypass
+ 0 - Cache Enable
+ 1 - Bypass cache (Default)
+ bit [10] - Riscv SRAM clock edge selection
+ 0 - Normal
+ 1 - Invert (Default)
+ bit [12:11] - Skew selection
+ 2'b00 - Default value (Default)
+ 2'b01 - Default value + 2
+ 2'b10 - Default value + 4
+ 2'b11 - Default value - 4
+
+ bit[15] - Strap Mode
+ 0 - [14:0] loaded from pad
+ 1 - Default reset value loaded
+ PSTRAP_DEFAULT_VALUE
+****************************************************/
+
+`define PSTRAP_CLK_SRC 1:0
+`define PSTRAP_CLK_DIV 3:2
+`define PSTRAP_UARTM_CFG 4
+`define PSTRAP_QSPI_SRAM 5
+`define PSTRAP_QSPI_FLASH 7:6
+`define PSTRAP_RISCV_RESET_MODE 8
+`define PSTRAP_RISCV_CACHE_BYPASS 9
+`define PSTRAP_RISCV_SRAM_CLK_EDGE 10
+`define PSTRAP_CLK_SKEW 12:11
+
+`define PSTRAP_DEFAULT_VALUE 15
+
+/************************************************************
+system strap decoding
+ bit[1:0] - System Clock Source Selection for wbs
+ 00 - User clock1
+ 01 - User clock2
+ 10 - Internal PLL
+ 11 - Xtal
+ bit[3:2] - Clock Division for wbs
+ 00 - 0 Div
+ 01 - 2 Div
+ 10 - 4 Div
+ 11 - 8 Div
+ bit[5:4] - System Clock Source Selection for riscv
+ 00 - User clock1
+ 01 - User clock2
+ 10 - Internal PLL
+ 11 - Xtal
+ bit[7:6] - Clock Division for riscv
+ 00 - 0 Div
+ 01 - 2 Div
+ 10 - 4 Div
+ 11 - 8 Div
+ bit [8] - uart master config control
+ 0 - load from LA
+ 1 - constant value based on system clock selection
+ bit [9] - QSPI SRAM Mode Selection CS#2
+ 1'b0 - Single
+ 1'b1 - Quad
+ bit [11:10] - QSPI FLASH Mode Selection CS#0
+ 2'b00 - Single
+ 2'b01 - Double
+ 2'b10 - Quad
+ 2'b11 - QDDR
+ bit [12] - Riscv Reset control
+ 0 - Keep Riscv on Reset
+ 1 - Removed Riscv on Power On Reset
+ bit [13] - Riscv Cache Bypass
+ 1 - Cache Enable
+ 0 - Bypass cache
+ bit [14] - Riscv SRAM clock edge selection
+ 0 - Normal
+ 1 - Invert
+
+ bit [15] - Soft Reboot Request
+ bit [17:16] - cfg_cska_wi Skew selection
+ bit [19:18] - cfg_cska_wh Skew selection
+ bit [21:20] - cfg_cska_riscv Skew selection
+ bit [23:22] - cfg_cska_qspi Skew selection
+ bit [25:24] - cfg_cska_uart Skew selection
+ bit [27:26] - cfg_cska_pinmux Skew selection
+ bit [29:28] - cfg_cska_qspi_co Skew selection
+
+
+********************************************************/
+// Stikcy Strap
+`define STRAP_WB_CLK_SRC 1:0
+`define STRAP_WB_CLK_DIV 3:2
+`define STRAP_RISCV_CLK_SRC 5:4
+`define STRAP_RISCV_CLK_DIV 7:6
+`define STRAP_UARTM_CFG 8
+`define STRAP_QSPI_SRAM 9
+`define STRAP_QSPI_FLASH 11:10
+`define STRAP_RISCV_RESET_MODE 12
+`define STRAP_RISCV_CACHE_BYPASS 13
+`define STRAP_RISCV_SRAM_CLK_EDGE 14
+`define STRAP_QSPI_PRE_SRAM 15 // Previous SRAM Strap Status
+`define STRAP_CLK_SKEW_WI 17:16
+`define STRAP_CLK_SKEW_WH 19:18
+`define STRAP_CLK_SKEW_RISCV 21:20
+`define STRAP_CLK_SKEW_QSPI 23:22
+`define STRAP_CLK_SKEW_UART 25:24
+`define STRAP_CLK_SKEW_PINMUX 27:26
+`define STRAP_CLK_SKEW_QSPI_CO 29:28
+`define STRAP_QSPI_INIT_BYPASS 30
+`define STRAP_SOFT_REBOOT_REQ 31
+
+
+`endif // USER_PARMS
+
diff --git a/verilog/rtl/user_project_wrapper.v b/verilog/rtl/user_project_wrapper.v
index 3429628..cc05b3a 100644
--- a/verilog/rtl/user_project_wrapper.v
+++ b/verilog/rtl/user_project_wrapper.v
@@ -25,17 +25,21 @@
//// Description ////
//// This is digital core and integrate all the main block ////
//// here. Following block are integrated here ////
-//// 1. Risc V Core ////
-//// 2. Quad SPI Master ////
-//// 3. Wishbone Cross Bar ////
-//// 4. UART ////
-//// 5, USB 1.1 ////
-//// 6. SPI Master (Single) ////
-//// 7. TCM SRAM 2KB ////
-//// 8. 2KB icache and 2KB dcache ////
-//// 8. 6 Channel ADC ////
-//// 9. Pinmux with GPIO and 6 PWM ////
-////
+//// 1. 2x 32 bit Risc V Core ////
+//// 2. Quad SPI Master(SPI Flash/SRAM) ////
+//// 3. Wishbone Cross Bar ////
+//// 4. 2 x UART ////
+//// 5, USB 1.1 Host ////
+//// 6. SPI Master (Single) ////
+//// 7. TCM SRAM 2KB ////
+//// 8. 2KB icache and 2KB dcache ////
+//// 9. 6 Channel ADC (Pending) ////
+//// 10. Pinmux with GPIO and 6 PWM ////
+//// 11. 15 x hardware Semaphore ////
+//// 12. 4 x ws281x driver ////
+//// 13. 3 x Hardware Timer ////
+//// 14. UART Master ////
+//// 15. SPI Slave (As Arduino ISP) ////
//// ////
//// To Do: ////
//// nothing ////
@@ -178,7 +182,7 @@
//// wishbone slave clock generation config increase from ////
//// 3 to 4 bit support clock source selection ////
//// B. Changed Module: qspim ////
-////// 1. Bug fix in spi rise and fall pulse relation w.r.t ////
+//// 1. Bug fix in spi rise and fall pulse relation w.r.t ////
//// spi_clk. Note: Previous version work only with ////
//// spi clock config = 0x2 ////
//// 2. spi_oen generation fix for different spi mode ////
@@ -202,7 +206,7 @@
//// 4.2 April 6 2022, Dinesh A ////
//// 1. SSPI CS# increased from 1 to 4 ////
//// 2. uart port increase to two ////
-//// 4.3 May 23 2022, Dinesh A ////
+//// 4.3 May 24 2022, Dinesh A ////
//// Re targetted the design to mpw-6 tools set and risc ////
//// core logic are timing optimized to 100mhz ////
//// 4.4 May 29 2022, Dinesh A ////
@@ -230,6 +234,31 @@
//// `define ADDR_SPACE_PWM 32'h1002_0080 ////
//// `define ADDR_SPACE_TIMER 32'h1002_00C0 ////
//// `define ADDR_SPACE_SEMA 32'h1002_0100 ////
+//// 5.1 Aug 24 2022, Dinesh A ////
+//// A. GPIO interrupt generation changed from 1 to 32 ////
+//// B. Total interrupt to Riscv changed from 16 to 32 ////
+//// C. uart_master disable option added at pinmux ////
+//// D. Timer interrupt related clean-up ////
+//// E. 4x ws281x driver logic added ////
+//// F. 4x ws281x driver are mux with 16x gpio ////
+//// G. gpio type select the normal gpio vs ws281x ////
+//// 5.2 Aug 26 2022, Dinesh A ////
+//// A. We have copied the user_defines.h from caravel ////
+//// and configured all the GPIO from 5 onwards as ////
+//// GPIO_MODE_USER_STD_BIDIRECTIONAL ////
+//// ////
+//// As digitial-io[0-5] reserved at power up. ////
+//// B. to keep at least one uart access, ////
+//// we have moved UART_RXD[1] from io[3] to io[6] ////
+//// C. SPI Slave SSN move from io[0] to [7] ////
+//// 5.3 Sept 2 2022, Dinesh A ////
+//// A. System Strap implementation ////
+//// B. Arduino pins are moved to take care of caravel ////
+//// digital-io[0-4] resevred ////
+//// C. global register space increased from 16 to 32 ////
+//// D. reset fsm is implementation with soft reboot ////
+//// option ////
+//// E. strap based booting option added for qspi ////
//// ////
//////////////////////////////////////////////////////////////////////
//// ////
@@ -284,6 +313,52 @@
0x3000_0000 to 0x307F_FFFF - Indirect Address
{Bank_Sel[15:3],WB ADDR[18:0]}
***********************************************************************/
+/***********************************************************************
+ * Caravel I/O mapping
+ *
+ * mprj_io[37] io_in/out/oeb/in_3v3[26] --- ---
+ * mprj_io[36] io_in/out/oeb/in_3v3[25] --- ---
+ * mprj_io[35] io_in/out/oeb/in_3v3[24] gpio_analog/noesd[17] ---
+ * mprj_io[34] io_in/out/oeb/in_3v3[23] gpio_analog/noesd[16] ---
+ * mprj_io[33] io_in/out/oeb/in_3v3[22] gpio_analog/noesd[15] ---
+ * mprj_io[32] io_in/out/oeb/in_3v3[21] gpio_analog/noesd[14] ---
+ * mprj_io[31] io_in/out/oeb/in_3v3[20] gpio_analog/noesd[13] ---
+ * mprj_io[30] io_in/out/oeb/in_3v3[19] gpio_analog/noesd[12] ---
+ * mprj_io[29] io_in/out/oeb/in_3v3[18] gpio_analog/noesd[11] ---
+ * mprj_io[28] io_in/out/oeb/in_3v3[17] gpio_analog/noesd[10] ---
+ * mprj_io[27] io_in/out/oeb/in_3v3[16] gpio_analog/noesd[9] ---
+ * mprj_io[26] io_in/out/oeb/in_3v3[15] gpio_analog/noesd[8] ---
+ * mprj_io[25] io_in/out/oeb/in_3v3[14] gpio_analog/noesd[7] ---
+ * mprj_io[24] --- --- user_analog[10]
+ * mprj_io[23] --- --- user_analog[9]
+ * mprj_io[22] --- --- user_analog[8]
+ * mprj_io[21] --- --- user_analog[7]
+ * mprj_io[20] --- --- user_analog[6] clamp[2]
+ * mprj_io[19] --- --- user_analog[5] clamp[1]
+ * mprj_io[18] --- --- user_analog[4] clamp[0]
+ * mprj_io[17] --- --- user_analog[3]
+ * mprj_io[16] --- --- user_analog[2]
+ * mprj_io[15] --- --- user_analog[1]
+ * mprj_io[14] --- --- user_analog[0]
+ * mprj_io[13] io_in/out/oeb/in_3v3[13] gpio_analog/noesd[6] ---
+ * mprj_io[12] io_in/out/oeb/in_3v3[12] gpio_analog/noesd[5] ---
+ * mprj_io[11] io_in/out/oeb/in_3v3[11] gpio_analog/noesd[4] ---
+ * mprj_io[10] io_in/out/oeb/in_3v3[10] gpio_analog/noesd[3] ---
+ * mprj_io[9] io_in/out/oeb/in_3v3[9] gpio_analog/noesd[2] ---
+ * mprj_io[8] io_in/out/oeb/in_3v3[8] gpio_analog/noesd[1] ---
+ * mprj_io[7] io_in/out/oeb/in_3v3[7] gpio_analog/noesd[0] ---
+ * mprj_io[6] io_in/out/oeb/in_3v3[6] --- ---
+ * mprj_io[5] io_in/out/oeb/in_3v3[5] --- ---
+ * mprj_io[4] io_in/out/oeb/in_3v3[4] --- ---
+ * mprj_io[3] io_in/out/oeb/in_3v3[3] --- ---
+ * mprj_io[2] io_in/out/oeb/in_3v3[2] --- ---
+ * mprj_io[1] io_in/out/oeb/in_3v3[1] --- ---
+ * mprj_io[0] io_in/out/oeb/in_3v3[0] --- ---
+
+
+************************************************************************/
+
+`include "user_params.svh"
module user_project_wrapper (
`ifdef USE_POWER_PINS
@@ -459,7 +534,7 @@
// Global Register Wishbone Interface
//---------------------------------------------------------------------
wire wbd_glbl_stb_o ; // strobe/request
-wire [8:0] wbd_glbl_adr_o ; // address
+wire [9:0] wbd_glbl_adr_o ; // address
wire wbd_glbl_we_o ; // write
wire [WB_WIDTH-1:0] wbd_glbl_dat_o ; // data output
wire [3:0] wbd_glbl_sel_o ; // byte enable
@@ -504,7 +579,7 @@
wire wbd_int_rst_n ;
wire wbd_pll_rst_n ;
-wire [15:0] irq_lines ;
+wire [31:0] irq_lines ;
wire soft_irq ;
@@ -526,7 +601,7 @@
wire [3:0] cfg_cska_pinmux_rp ; // clock skew adjust for pinmux
wire [3:0] cfg_cska_qspi_co_rp ; // clock skew adjust for global reg
-wire [15:0] irq_lines_rp ; // Repeater
+wire [31:0] irq_lines_rp ; // Repeater
wire soft_irq_rp ; // Repeater
wire wbd_clk_risc_rp ;
@@ -661,6 +736,17 @@
wire [3:0] spi_csn ;
+//---------------------------------------------------------------------
+// Strap
+//---------------------------------------------------------------------
+wire [31:0] system_strap ;
+wire [31:0] strap_sticky ;
+wire [1:0] strap_qspi_flash = system_strap[`STRAP_QSPI_FLASH];
+wire strap_qspi_sram = system_strap[`STRAP_QSPI_SRAM];
+wire strap_qspi_pre_sram = system_strap[`STRAP_QSPI_PRE_SRAM];
+wire strap_qspi_init_bypass = system_strap[`STRAP_QSPI_INIT_BYPASS];
+
+
//--------------------------------------------------------------------------
// Pinmux Risc core config
// -------------------------------------------------------------------------
@@ -694,10 +780,18 @@
`endif
.user_clock1 (wb_clk_i ),
.user_clock2 (user_clock2 ),
+ .int_pll_clock (int_pll_clock ),
.cpu_clk (cpu_clk ),
- .rtc_clk (rtc_clk ),
- .usb_clk (usb_clk ),
+
+ // to/from Pinmux
+ .xtal_clk (xtal_clk ),
+ .e_reset_n (e_reset_n ), // external reset
+ .p_reset_n (p_reset_n ), // power-on reset
+ .s_reset_n (s_reset_n ), // soft reset
+ .cfg_strap_pad_ctrl (cfg_strap_pad_ctrl ),
+ .system_strap (system_strap ),
+ .strap_sticky (strap_sticky ),
.wbd_int_rst_n (wbd_int_rst_n ),
.wbd_pll_rst_n (wbd_pll_rst_n ),
@@ -1023,6 +1117,11 @@
.mclk (wbd_clk_spi ),
.rst_n (qspim_rst_n ),
+ .strap_flash (strap_qspi_flash ),
+ .strap_pre_sram (strap_qspi_pre_sram ),
+ .strap_sram (strap_qspi_sram ),
+ .cfg_init_bypass (strap_qspi_init_bypass ),
+
// Clock Skew Adjust
.cfg_cska_sp_co (cfg_cska_qspi_co_rp ),
.cfg_cska_spi (cfg_cska_qspi_rp ),
@@ -1056,8 +1155,8 @@
wb_interconnect #(
`ifndef SYNTHESIS
- .CH_CLK_WD (4 ),
- .CH_DATA_WD (37 )
+ .CH_CLK_WD (4 ),
+ .CH_DATA_WD (53 )
`endif
) u_intercon (
`ifdef USE_POWER_PINS
@@ -1077,24 +1176,24 @@
.ch_data_in ({
soft_irq,
- irq_lines[15:0],
+ irq_lines[31:0],
- cfg_cska_qspi_co[3:0],
- cfg_cska_pinmux[3:0],
- cfg_cska_uart[3:0],
- cfg_cska_qspi[3:0],
- cfg_cska_riscv[3:0]
+ cfg_cska_qspi_co[3:0],
+ cfg_cska_pinmux[3:0],
+ cfg_cska_uart[3:0],
+ cfg_cska_qspi[3:0],
+ cfg_cska_riscv[3:0]
} ),
.ch_data_out ({
soft_irq_rp,
- irq_lines_rp[15:0],
+ irq_lines_rp[31:0],
- cfg_cska_qspi_co_rp[3:0],
- cfg_cska_pinmux_rp[3:0],
- cfg_cska_uart_rp[3:0],
- cfg_cska_qspi_rp[3:0],
- cfg_cska_riscv_rp[3:0]
+ cfg_cska_qspi_co_rp[3:0],
+ cfg_cska_pinmux_rp[3:0],
+ cfg_cska_uart_rp[3:0],
+ cfg_cska_qspi_rp[3:0],
+ cfg_cska_riscv_rp[3:0]
} ),
// Clock Skew adjust
.wbd_clk_int (wbd_clk_int ),
@@ -1211,7 +1310,7 @@
.usb_rstn (usb_rst_n ), // USB reset
.spi_rstn (sspim_rst_n ), // SPI reset
.app_clk (wbd_clk_uart_skew ),
- .usb_clk (usb_clk ),
+ .usb_clk (usb_clk ),
// Reg Bus Interface Signal
.reg_cs (wbd_uart_stb_o ),
@@ -1268,8 +1367,22 @@
// System Signals
// Inputs
.mclk (wbd_clk_pinmux_skew ),
- .h_reset_n (wbd_int_rst_n ),
+ .e_reset_n (e_reset_n ),
+ .p_reset_n (p_reset_n ),
+ .s_reset_n (wbd_int_rst_n ),
+ .cfg_strap_pad_ctrl (cfg_strap_pad_ctrl ),
+ .system_strap (system_strap ),
+ .strap_sticky (strap_sticky ),
+
+ .user_clock1 (wb_clk_i ),
+ .user_clock2 (user_clock2 ),
+ .int_pll_clock (int_pll_clock ),
+ .xtal_clk (xtal_clk ),
+
+
+ .rtc_clk (rtc_clk ),
+ .usb_clk (usb_clk ),
// Reset Control
.cpu_core_rst_n (cpu_core_rst_n ),
.cpu_intf_rst_n (cpu_intf_rst_n ),
@@ -1279,7 +1392,7 @@
.i2cm_rst_n (i2c_rst_n ),
.usb_rst_n (usb_rst_n ),
- .cfg_riscv_ctrl (cfg_riscv_ctrl ),
+ .cfg_riscv_ctrl (cfg_riscv_ctrl ),
// Reg Bus Interface Signal
.reg_cs (wbd_glbl_stb_o ),
diff --git a/verilog/rtl/user_reg_map.v b/verilog/rtl/user_reg_map.v
index 53d8331..80de782 100644
--- a/verilog/rtl/user_reg_map.v
+++ b/verilog/rtl/user_reg_map.v
@@ -10,10 +10,10 @@
`define ADDR_SPACE_UART1 32'h3001_0100
`define ADDR_SPACE_PINMUX 32'h3002_0000
`define ADDR_SPACE_GLBL 32'h3002_0000
-`define ADDR_SPACE_GPIO 32'h3002_0040
-`define ADDR_SPACE_PWM 32'h3002_0080
-`define ADDR_SPACE_TIMER 32'h3002_00C0
-`define ADDR_SPACE_SEMA 32'h3002_0100
+`define ADDR_SPACE_GPIO 32'h3002_0080
+`define ADDR_SPACE_PWM 32'h3002_0100
+`define ADDR_SPACE_TIMER 32'h3002_0180
+`define ADDR_SPACE_SEMA 32'h3002_0200
`define ADDR_SPACE_WBHOST 32'h3008_0000
//--------------------------------------------------
@@ -34,12 +34,19 @@
`define GLBL_CFG_INTR_MSK 8'h0C // reg_3 - Global Interrupt Mask
`define GLBL_CFG_INTR_STAT 8'h10 // reg_4 - Global Interrupt
`define GLBL_CFG_MUTI_FUNC 8'h14 // reg_5 - Multi functional sel
-`define GLBL_CFG_SOFT_REG_0 8'h18 // reg_6 - Sof Register
-`define GLBL_CFG_SOFT_REG_1 8'h1C // reg_7 - Sof Register
-`define GLBL_CFG_SOFT_REG_2 8'h20 // reg_8 - Sof Register
-`define GLBL_CFG_SOFT_REG_3 8'h24 // reg_9 - Sof Register
-`define GLBL_CFG_SOFT_REG_4 8'h28 // reg_10 - Sof Register
-`define GLBL_CFG_SOFT_REG_5 8'h2C // reg_11 - Sof Register
+`define GLBL_CFG_CLK_CTRL 8'h18 // reg_6 - RTC/USB CLK CTRL
+`define GLBL_CFG_PAD_STRAP 8'h30 // Strap as seen in Pad
+`define GLBL_CFG_STRAP_STICKY 8'h34 // Sticky Strap used in next soft boot
+`define GLBL_CFG_SYSTEM_STRAP 8'h38 // Current System Strap
+`define GLBL_CFG_MAIL_BOX 8'h3C // reg_15 - Mail Box
+`define GLBL_CFG_SOFT_REG_0 8'h40 // reg_16 - Sof Register
+`define GLBL_CFG_SOFT_REG_1 8'h44 // reg_17 - Sof Register
+`define GLBL_CFG_SOFT_REG_2 8'h48 // reg_18 - Sof Register
+`define GLBL_CFG_SOFT_REG_3 8'h4C // reg_19 - Sof Register
+`define GLBL_CFG_SOFT_REG_4 8'h50 // reg_20 - Sof Register
+`define GLBL_CFG_SOFT_REG_5 8'h54 // reg_21 - Sof Register
+`define GLBL_CFG_SOFT_REG_6 8'h58 // reg_22 - Sof Register
+`define GLBL_CFG_SOFT_REG_7 8'h5C // reg_23 - Sof Register
//--------------------------------------------------
// GPIO Register
diff --git a/verilog/rtl/wb_host/src/wb_host.sv b/verilog/rtl/wb_host/src/wb_host.sv
index d3d85cc..766a87d 100644
--- a/verilog/rtl/wb_host/src/wb_host.sv
+++ b/verilog/rtl/wb_host/src/wb_host.sv
@@ -50,6 +50,9 @@
//// indirect Map {Bank_Sel[15:3], wbm_adr_i[18:0]} ////
//// 2.wbm_cyc_i need to qualified with wbm_stb_i ////
//// ////
+//// 0.5 - Aug 30 2022, Dinesh A ////
+//// A. System strap related changes, reset_fsm added ////
+//// B. rtc and usb clock moved to pinmux ////
//// ////
//////////////////////////////////////////////////////////////////////
//// ////
@@ -78,6 +81,8 @@
//// ////
//////////////////////////////////////////////////////////////////////
+`include "user_params.svh"
+
module wb_host (
`ifdef USE_POWER_PINS
@@ -88,12 +93,23 @@
input logic user_clock2 ,
output logic cpu_clk ,
- output logic rtc_clk ,
- output logic usb_clk ,
+
// Global Reset control
output logic wbd_int_rst_n ,
output logic wbd_pll_rst_n ,
+
+ // to/from Pinmux
+ output logic int_pll_clock ,
+ input logic xtal_clk ,
+ output logic e_reset_n , // external reset
+ output logic p_reset_n , // power-on reset
+ output logic s_reset_n , // soft reset
+ output logic cfg_strap_pad_ctrl,
+ output logic [31:0] system_strap ,
+ input logic [31:0] strap_sticky ,
+
+
// Master Port
input logic wbm_rst_i , // Regular Reset signal
input logic wbm_clk_i , // System clock
@@ -173,13 +189,11 @@
logic sw_wr_en_3;
logic [15:0] cfg_bank_sel;
logic [31:0] reg_0; // Software_Reg_0
-logic [31:0] cfg_clk_ctrl2;
+logic [8:0] cfg_clk_ctrl2;
logic [31:0] cfg_pll_ctrl;
-logic [7:0] cfg_wb_clk_ctrl;
-logic [7:0] cfg_cpu_clk_ctrl;
-logic [7:0] cfg_rtc_clk_ctrl;
-logic [7:0] cfg_usb_clk_ctrl;
+logic [3:0] cfg_wb_clk_ctrl;
+logic [3:0] cfg_cpu_clk_ctrl;
logic [31:0] cfg_glb_ctrl;
@@ -222,19 +236,25 @@
logic wb_err_int ; // error
logic [3:0] cfg_mon_sel ;
-logic int_pll_clock ;
logic pll_clk_div16 ;
logic pll_clk_div16_buf ;
logic [2:0] cfg_ref_pll_div ;
+logic arst_n ;
+logic soft_reboot ;
+logic clk_enb ;
+
+assign e_reset_n = wbm_rst_n ; // sync external reset
+assign cfg_strap_pad_ctrl = !p_reset_n;
+
+wire soft_boot_req = strap_sticky[`STRAP_SOFT_REBOOT_REQ];
-assign cfg_pll_enb = cfg_glb_ctrl[15];
-assign cfg_ref_pll_div = cfg_glb_ctrl[14:12];
-assign cfg_mon_sel = cfg_glb_ctrl[11:8];
-
-assign cfg_dco_mode = cfg_pll_ctrl[31];
-assign cfg_pll_fed_div = cfg_pll_ctrl[30:26];
-assign cfg_dc_trim = cfg_pll_ctrl[25:0];
+//------------------------------------------
+// PLL Trim Value
+//-----------------------------------------
+assign cfg_dco_mode = cfg_pll_ctrl[31];
+assign cfg_pll_fed_div = cfg_pll_ctrl[30:26];
+assign cfg_dc_trim = cfg_pll_ctrl[25:0];
//assign int_pll_clock = pll_clk_out[0];
ctech_clk_buf u_clkbuf_pll (.A (pll_clk_out[0]), . X(int_pll_clock));
@@ -243,48 +263,81 @@
// Debug clock monitor optin
assign dbg_clk_mon = (cfg_mon_sel == 4'b000) ? pll_clk_div16_buf:
- (cfg_mon_sel == 4'b001) ? pll_ref_clk :
- (cfg_mon_sel == 4'b010) ? wbs_clk_out :
- (cfg_mon_sel == 4'b011) ? cpu_clk_int :
- (cfg_mon_sel == 4'b100) ? rtc_clk_div :
- (cfg_mon_sel == 4'b101) ? usb_clk_int : 1'b0;
+ (cfg_mon_sel == 4'b001) ? pll_ref_clk :
+ (cfg_mon_sel == 4'b010) ? wbs_clk_out :
+ (cfg_mon_sel == 4'b011) ? cpu_clk_int : 1'b0;
-// Reset control
-ctech_buf u_buf_wb_rst (.A(cfg_glb_ctrl[0]),.X(wbd_int_rst_n));
-ctech_buf u_buf_pll_rst (.A(cfg_glb_ctrl[1]),.X(wbd_pll_rst_n));
//--------------------------------------------------------------------------------
// Look like wishbone reset removed early than user Power up sequence
// To control the reset phase, we have added additional control through la[0]
// ------------------------------------------------------------------------------
-wire arst_n = !wbm_rst_i & la_data_in[0];
+assign arst_n = !wbm_rst_i;
reset_sync u_wbm_rst (
- .scan_mode (1'b0 ),
+ .scan_mode (1'b0 ),
.dclk (wbm_clk_i ), // Destination clock domain
- .arst_n (arst_n ), // active low async reset
+ .arst_n (arst_n ), // active low async reset
.srst_n (wbm_rst_n )
);
reset_sync u_wbs_rst (
- .scan_mode (1'b0 ),
+ .scan_mode (1'b0 ),
.dclk (wbs_clk_i ), // Destination clock domain
- .arst_n (arst_n ), // active low async reset
+ .arst_n (s_reset_n ), // active low async reset
.srst_n (wbs_rst_n )
);
+//------------------------------------------
+// Reset FSM
+//------------------------------------------
+// Keep WBS in Ref clock during initial boot to strap loading
+logic force_refclk;
+wb_reset_fsm u_reset_fsm (
+ .clk (wbm_clk_i ),
+ .e_reset_n (e_reset_n ), // external reset
+ .cfg_fast_sim (cfg_fast_sim),
+ .soft_boot_req (soft_boot_req),
+
+ .p_reset_n (p_reset_n ), // power-on reset
+ .s_reset_n (s_reset_n ), // soft reset
+ .clk_enb (clk_enb ),
+ .soft_reboot (soft_reboot ),
+ .force_refclk (force_refclk)
+
+);
+
+
+//-------------------------------------------------
+// UART2WB HOST
+// Uart Baud-16x computation
+// Assumption is default wb clock is 40Mhz
+// For 9600 Baud
+// 40,000,000/(9600*16) = 260;
+// Configured Value = 260-1 = 259
+//-------------------------------------------------
+
+wire strap_uart_cfg_mode = system_strap[`STRAP_UARTM_CFG];
+
+wire cfg_uartm_tx_enable = (strap_uart_cfg_mode) ? la_data_in[1] : 1'b1;
+wire cfg_uartm_rx_enable = (strap_uart_cfg_mode) ? la_data_in[2] : 1'b1;
+wire cfg_uartm_stop_bit = (strap_uart_cfg_mode) ? la_data_in[3] : 1'b1;
+wire [11:0]cfg_uart_baud_16x = (strap_uart_cfg_mode) ? la_data_in[15:4] : 259;
+wire [1:0] cfg_uartm_cfg_pri_mod = (strap_uart_cfg_mode) ? la_data_in[17:16] : 2'b0;
+
+
// UART Master
uart2wb u_uart2wb (
- .arst_n (wbm_rst_n ), // sync reset
- .app_clk (wbm_clk_i ), // sys clock
+ .arst_n (s_reset_n ), // sync reset
+ .app_clk (wbm_clk_i ), // sys clock
// configuration control
- .cfg_tx_enable (la_data_in[1] ), // Enable Transmit Path
- .cfg_rx_enable (la_data_in[2] ), // Enable Received Path
- .cfg_stop_bit (la_data_in[3] ), // 0 -> 1 Start , 1 -> 2 Stop Bits
- .cfg_baud_16x (la_data_in[15:4] ), // 16x Baud clock generation
- .cfg_pri_mod (la_data_in[17:16] ), // priority mode, 0 -> nop, 1 -> Even, 2 -> Odd
+ .cfg_tx_enable (cfg_uartm_tx_enable ), // Enable Transmit Path
+ .cfg_rx_enable (cfg_uartm_rx_enable ), // Enable Received Path
+ .cfg_stop_bit (cfg_uartm_stop_bit ), // 0 -> 1 Start , 1 -> 2 Stop Bits
+ .cfg_baud_16x (cfg_uart_baud_16x ), // 16x Baud clock generation
+ .cfg_pri_mod (cfg_uartm_cfg_pri_mod ), // priority mode, 0 -> nop, 1 -> Even, 2 -> Odd
// Master Port
.wbm_cyc_o (wbm_uart_cyc_i ), // strobe/request
@@ -309,34 +362,40 @@
);
+//----------------------------------------
+// SPI as ISP
+//----------------------------------------
+
sspis_top u_spi2wb(
.sys_clk (wbm_clk_i ),
- .rst_n (wbm_rst_n ),
+ .rst_n (e_reset_n ),
- .sclk (sclk ),
- .ssn (ssn ),
- .sdin (sdin ),
- .sdout (sdout ),
- .sdout_oen (sdout_oen ),
+ .sclk (sclk ),
+ .ssn (ssn ),
+ .sdin (sdin ),
+ .sdout (sdout ),
+ .sdout_oen (sdout_oen ),
// WB Master Port
- .wbm_cyc_o (wbm_spi_cyc_i ), // strobe/request
- .wbm_stb_o (wbm_spi_stb_i ), // strobe/request
- .wbm_adr_o (wbm_spi_adr_i ), // address
- .wbm_we_o (wbm_spi_we_i ), // write
- .wbm_dat_o (wbm_spi_dat_i ), // data output
- .wbm_sel_o (wbm_spi_sel_i ), // byte enable
- .wbm_dat_i (wbm_spi_dat_o ), // data input
- .wbm_ack_i (wbm_spi_ack_o ), // acknowlegement
- .wbm_err_i (wbm_spi_err_o ) // error
+ .wbm_cyc_o (wbm_spi_cyc_i ), // strobe/request
+ .wbm_stb_o (wbm_spi_stb_i ), // strobe/request
+ .wbm_adr_o (wbm_spi_adr_i ), // address
+ .wbm_we_o (wbm_spi_we_i ), // write
+ .wbm_dat_o (wbm_spi_dat_i ), // data output
+ .wbm_sel_o (wbm_spi_sel_i ), // byte enable
+ .wbm_dat_i (wbm_spi_dat_o ), // data input
+ .wbm_ack_i (wbm_spi_ack_o ), // acknowlegement
+ .wbm_err_i (wbm_spi_err_o ) // error
);
-// Arbitor to select between external wb vs uart wb
+//--------------------------------------------------
+// Arbitor to select between external wb vs uart wb vs spi
+//---------------------------------------------------
wire [1:0] grnt;
wb_arb u_arb(
.clk (wbm_clk_i),
- .rstn (wbm_rst_n),
+ .rstn (s_reset_n),
.req ({1'b0,wbm_spi_stb_i,wbm_uart_stb_i,(wbm_stb_i & wbm_cyc_i)}),
.gnt (grnt)
);
@@ -389,8 +448,8 @@
ctech_delay_buf u_delay1_stb0 (.X(wb_stb_d1),.A(wb_stb_i));
ctech_delay_buf u_delay2_stb1 (.X(wb_stb_d2),.A(wb_stb_d1));
ctech_delay_buf u_delay2_stb2 (.X(wb_stb_d3),.A(wb_stb_d2));
-always_ff @(negedge wbm_rst_n or posedge wbm_clk_i) begin
- if ( wbm_rst_n == 1'b0 ) begin
+always_ff @(negedge s_reset_n or posedge wbm_clk_i) begin
+ if ( s_reset_n == 1'b0 ) begin
wb_req <= '0;
wb_dat_o <= '0;
wb_ack_o <= '0;
@@ -431,9 +490,9 @@
assign sw_wr_en_4 = sw_wr_en && (sw_addr==4);
assign sw_wr_en_5 = sw_wr_en && (sw_addr==5);
-always @ (posedge wbm_clk_i or negedge wbm_rst_n)
+always @ (posedge wbm_clk_i or negedge s_reset_n)
begin : preg_out_Seq
- if (wbm_rst_n == 1'b0)
+ if (s_reset_n == 1'b0)
begin
reg_rdata <= 'h0;
reg_ack <= 1'b0;
@@ -455,11 +514,22 @@
//-------------------------------------
// Global + Clock Control
// -------------------------------------
-assign cfg_glb_ctrl = reg_0[31:0];
-assign cfg_wb_clk_ctrl = cfg_clk_ctrl2[7:0];
-assign cfg_rtc_clk_ctrl = cfg_clk_ctrl2[15:8];
-assign cfg_usb_clk_ctrl = cfg_clk_ctrl2[23:16];
-assign cfg_cpu_clk_ctrl = cfg_clk_ctrl2[31:24];
+assign cfg_glb_ctrl = reg_0[31:0];
+// Reset control
+// On Power-up wb & pll power default enabled
+ctech_buf u_buf_wb_rst (.A(cfg_glb_ctrl[0] & s_reset_n),.X(wbd_int_rst_n));
+ctech_buf u_buf_pll_rst (.A(cfg_glb_ctrl[1] & s_reset_n),.X(wbd_pll_rst_n));
+
+//assign cfg_fast_sim = cfg_glb_ctrl[8];
+ctech_clk_buf u_fastsim_buf (.A (cfg_glb_ctrl[8]), . X(cfg_fast_sim)); // To Bypass Reset FSM initial wait time
+
+assign cfg_pll_enb = cfg_glb_ctrl[15];
+assign cfg_ref_pll_div = cfg_glb_ctrl[14:12];
+assign cfg_mon_sel = cfg_glb_ctrl[11:8];
+
+
+assign cfg_wb_clk_ctrl = cfg_clk_ctrl2[3:0];
+assign cfg_cpu_clk_ctrl = cfg_clk_ctrl2[7:4];
always @( *)
@@ -470,18 +540,19 @@
3'b000 : reg_out [31:0] = reg_0;
3'b001 : reg_out [31:0] = {16'h0,cfg_bank_sel [15:0]};
3'b010 : reg_out [31:0] = cfg_clk_ctrl1 [31:0];
- 3'b011 : reg_out [31:0] = cfg_clk_ctrl2 [31:0];
+ 3'b011 : reg_out [31:0] = {24'h0,cfg_clk_ctrl2 [7:0]};
3'b100 : reg_out [31:0] = cfg_pll_ctrl [31:0];
+ 3'b101 : reg_out [31:0] = system_strap [31:0];
default : reg_out [31:0] = 'h0;
endcase
end
-generic_register #(32,0 ) u_glb_ctrl (
+generic_register #(32,32'h8003 ) u_glb_ctrl (
.we ({32{sw_wr_en_0}} ),
.data_in (wb_dat_i[31:0] ),
- .reset_n (wbm_rst_n ),
+ .reset_n (e_reset_n ),
.clk (wbm_clk_i ),
//List of Outs
@@ -491,37 +562,84 @@
generic_register #(16,16'h1000 ) u_bank_sel (
.we ({16{sw_wr_en_1}} ),
.data_in (wb_dat_i[15:0] ),
- .reset_n (wbm_rst_n ),
+ .reset_n (e_reset_n ),
.clk (wbm_clk_i ),
//List of Outs
.data_out (cfg_bank_sel[15:0] )
);
+//-----------------------------------------------
+// clock control-1
+//----------------------------------------------
-generic_register #(32,0 ) u_clk_ctrl1 (
- .we ({32{sw_wr_en_2}} ),
- .data_in (wb_dat_i[31:0] ),
- .reset_n (wbm_rst_n ),
- .clk (wbm_clk_i ),
-
- //List of Outs
- .data_out (cfg_clk_ctrl1[31:0])
- );
+wire [31:0] rst_clk_ctrl1;
-generic_register #(32,0 ) u_clk_ctrl2 (
- .we ({32{sw_wr_en_3}} ),
- .data_in (wb_dat_i[31:0] ),
- .reset_n (wbm_rst_n ),
- .clk (wbm_clk_i ),
-
- //List of Outs
- .data_out (cfg_clk_ctrl2[31:0])
- );
-generic_register #(32,0 ) u_pll_ctrl (
+assign rst_clk_ctrl1[3:0] = (strap_sticky[`STRAP_CLK_SKEW_WI] == 2'b00) ? SKEW_RESET_VAL[3:0] :
+ (strap_sticky[`STRAP_CLK_SKEW_WI] == 2'b01) ? SKEW_RESET_VAL[3:0] + 2 :
+ (strap_sticky[`STRAP_CLK_SKEW_WI] == 2'b10) ? SKEW_RESET_VAL[3:0] + 4 : SKEW_RESET_VAL[3:0]-4;
+
+assign rst_clk_ctrl1[7:4] = (strap_sticky[`STRAP_CLK_SKEW_WH] == 2'b00) ? SKEW_RESET_VAL[7:4] :
+ (strap_sticky[`STRAP_CLK_SKEW_WH] == 2'b01) ? SKEW_RESET_VAL[7:4] + 2 :
+ (strap_sticky[`STRAP_CLK_SKEW_WH] == 2'b10) ? SKEW_RESET_VAL[7:4] + 4 : SKEW_RESET_VAL[7:4]-4;
+
+assign rst_clk_ctrl1[11:8] = (strap_sticky[`STRAP_CLK_SKEW_RISCV] == 2'b00) ? SKEW_RESET_VAL[11:8] :
+ (strap_sticky[`STRAP_CLK_SKEW_RISCV] == 2'b01) ? SKEW_RESET_VAL[11:8] + 2 :
+ (strap_sticky[`STRAP_CLK_SKEW_RISCV] == 2'b10) ? SKEW_RESET_VAL[11:8] + 4 : SKEW_RESET_VAL[11:8]-4;
+
+assign rst_clk_ctrl1[15:12] = (strap_sticky[`STRAP_CLK_SKEW_QSPI] == 2'b00) ? SKEW_RESET_VAL[15:12] :
+ (strap_sticky[`STRAP_CLK_SKEW_QSPI] == 2'b01) ? SKEW_RESET_VAL[15:12] + 2 :
+ (strap_sticky[`STRAP_CLK_SKEW_QSPI] == 2'b10) ? SKEW_RESET_VAL[15:12] + 4 : SKEW_RESET_VAL[15:12]-4;
+
+assign rst_clk_ctrl1[19:16] = (strap_sticky[`STRAP_CLK_SKEW_UART] == 2'b00) ? SKEW_RESET_VAL[19:16] :
+ (strap_sticky[`STRAP_CLK_SKEW_UART] == 2'b01) ? SKEW_RESET_VAL[19:16] + 2 :
+ (strap_sticky[`STRAP_CLK_SKEW_UART] == 2'b10) ? SKEW_RESET_VAL[19:16] + 4 : SKEW_RESET_VAL[19:16]-4;
+
+assign rst_clk_ctrl1[23:20] = (strap_sticky[`STRAP_CLK_SKEW_PINMUX] == 2'b00) ? SKEW_RESET_VAL[23:20] :
+ (strap_sticky[`STRAP_CLK_SKEW_PINMUX] == 2'b01) ? SKEW_RESET_VAL[23:20] + 2 :
+ (strap_sticky[`STRAP_CLK_SKEW_PINMUX] == 2'b10) ? SKEW_RESET_VAL[23:20] + 4 : SKEW_RESET_VAL[23:20]-4;
+
+assign rst_clk_ctrl1[27:24] = (strap_sticky[`STRAP_CLK_SKEW_QSPI_CO] == 2'b00) ? SKEW_RESET_VAL[27:24] :
+ (strap_sticky[`STRAP_CLK_SKEW_QSPI_CO] == 2'b01) ? SKEW_RESET_VAL[27:24] + 2 :
+ (strap_sticky[`STRAP_CLK_SKEW_QSPI_CO] == 2'b10) ? SKEW_RESET_VAL[27:24] + 4 : SKEW_RESET_VAL[27:24]-4;
+
+assign rst_clk_ctrl1[31:28] = 4'b0;
+
+
+always @ (posedge wbm_clk_i ) begin
+ if (p_reset_n == 1'b0) begin
+ cfg_clk_ctrl1 <= rst_clk_ctrl1 ;
+ end
+ else begin
+ if(sw_wr_en_2 )
+ cfg_clk_ctrl1 <= wb_dat_i[31:0];
+ end
+end
+
+//--------------------------------
+// clock control-2
+//--------------------------------
+always @ (posedge wbm_clk_i) begin
+ if (p_reset_n == 1'b0) begin
+ cfg_clk_ctrl2 <= strap_sticky[7:0] ;
+ end
+ else begin
+ if(sw_wr_en_3 )
+ cfg_clk_ctrl2 <= wb_dat_i[7:0];
+ end
+end
+//--------------------------------
+// Pll Control
+//--------------------------------
+// PLL clock : 199.680 Mhz Period: 5.008 & bcount: 7, period
+// cfg_dc_trim = 26'b0000000000000_1010101101001
+// cfg_pll_fed_div = 5'b00000
+// cfg_dco_mode = 1'b1
+
+generic_register #(32,{1'b1,5'b00000,26'b0000000000000_1010101101001} ) u_pll_ctrl (
.we ({32{sw_wr_en_4}} ),
.data_in (wb_dat_i[31:0] ),
- .reset_n (wbm_rst_n ),
+ .reset_n (e_reset_n ),
.clk (wbm_clk_i ),
//List of Outs
@@ -529,6 +647,32 @@
);
+always @ (posedge wbm_clk_i ) begin
+ if (p_reset_n == 1'b0) begin
+ cfg_clk_ctrl2 <= strap_sticky[7:0] ;
+ end
+ else begin
+ if(sw_wr_en_3 )
+ cfg_clk_ctrl2 <= wb_dat_i[7:0];
+ end
+end
+//-------------------------------------------------------------
+// Note: system_strap reset (p_reset_n) will be released
+// eariler than s_reset_n to take care of strap loading
+//--------------------------------------------------------------
+always @ (posedge wbm_clk_i) begin
+ if (s_reset_n == 1'b0) begin
+ system_strap <= {soft_reboot,strap_sticky[30:0]};
+ end
+ else if(sw_wr_en_5 ) begin
+ system_strap <= wb_dat_i;
+ end
+end
+
+
+//--------------------- End of Register Bank ------------------------
+
+
assign wb_stb_int = wb_req & !reg_sel;
// Since design need more than 16MB address space, we have implemented
@@ -537,7 +681,7 @@
async_wb u_async_wb(
// Master Port
- .wbm_rst_n (wbm_rst_n ),
+ .wbm_rst_n (s_reset_n ),
.wbm_clk_i (wbm_clk_i ),
.wbm_cyc_i (wb_cyc_i ),
.wbm_stb_i (wb_stb_int ),
@@ -571,7 +715,7 @@
.clk_o (pll_ref_clk ),
// Inputs
.mclk (user_clock1 ),
- .reset_n (wbm_rst_n ),
+ .reset_n (e_reset_n ),
.clk_div_ratio (cfg_ref_pll_div )
);
@@ -582,39 +726,41 @@
.clk_o (pll_clk_div16 ),
// Inputs
.mclk (int_pll_clock ),
- .reset_n (wbm_rst_n ),
+ .reset_n (e_reset_n ),
.clk_div_ratio (4'hF )
);
//----------------------------------
// Generate Internal WishBone Clock
//----------------------------------
-logic wb_clk_div;
-logic wbs_ref_clk_int;
-logic wbs_ref_clk;
+logic wb_clk_div;
+logic wbs_ref_clk_int;
+logic wbs_ref_clk;
-wire [1:0] cfg_wb_clk_src_sel = cfg_wb_clk_ctrl[7:6];
-wire cfg_wb_clk_div = cfg_wb_clk_ctrl[5];
-wire [4:0] cfg_wb_clk_ratio = cfg_wb_clk_ctrl[4:0];
+wire [1:0] cfg_wb_clk_src_sel = cfg_wb_clk_ctrl[1:0];
+wire [1:0] cfg_wb_clk_ratio = cfg_wb_clk_ctrl[3:2];
-
+ // Keep WBS in Ref clock during initial boot to strap loading
assign wbs_ref_clk_int = (cfg_wb_clk_src_sel ==2'b00) ? user_clock1 :
(cfg_wb_clk_src_sel ==2'b01) ? user_clock2 :
- int_pll_clock;
+ (cfg_wb_clk_src_sel ==2'b10) ? int_pll_clock : xtal_clk;
ctech_clk_buf u_wbs_ref_clkbuf (.A (wbs_ref_clk_int), . X(wbs_ref_clk));
+ctech_clk_gate u_clkgate_wbs (.GATE (clk_enb), . CLK(wbs_clk_div), .GCLK(wbs_clk_out));
-//assign wbs_clk_out = (cfg_wb_clk_div) ? wb_clk_div : wbm_clk_i;
-ctech_mux2x1 u_wbs_clk_sel (.A0 (wbs_ref_clk), .A1 (wb_clk_div), .S (cfg_wb_clk_div), .X (wbs_clk_out));
+assign wbs_clk_div =(force_refclk) ? user_clock1 :
+ (cfg_wb_clk_ratio == 2'b00) ? wbs_ref_clk :
+ (cfg_wb_clk_ratio == 2'b01) ? wbs_ref_clk_div_2 :
+ (cfg_wb_clk_ratio == 2'b10) ? wbs_ref_clk_div_4 : wbs_ref_clk_div_8;
-
-clk_ctl #(4) u_wbclk (
+clk_div8 u_wbclk (
// Outputs
- .clk_o (wb_clk_div ),
+ .clk_div_8 (wbs_ref_clk_div_8 ),
+ .clk_div_4 (wbs_ref_clk_div_4 ),
+ .clk_div_2 (wbs_ref_clk_div_2 ),
// Inputs
- .mclk (wbs_ref_clk ),
- .reset_n (wbm_rst_n ),
- .clk_div_ratio (cfg_wb_clk_ratio )
+ .mclk (wbs_ref_clk ),
+ .reset_n (p_reset_n )
);
@@ -626,78 +772,29 @@
wire cpu_ref_clk;
wire cpu_clk_int;
-wire [1:0] cfg_cpu_clk_src_sel = cfg_cpu_clk_ctrl[7:6];
-wire cfg_cpu_clk_div = cfg_cpu_clk_ctrl[5];
-wire [4:0] cfg_cpu_clk_ratio = cfg_cpu_clk_ctrl[4:0];
+wire [1:0] cfg_cpu_clk_src_sel = cfg_cpu_clk_ctrl[1:0];
+wire [1:0] cfg_cpu_clk_ratio = cfg_cpu_clk_ctrl[3:2];
assign cpu_ref_clk_int = (cfg_cpu_clk_src_sel ==2'b00) ? user_clock1 :
(cfg_cpu_clk_src_sel ==2'b01) ? user_clock2 :
- int_pll_clock;
+ (cfg_cpu_clk_src_sel ==2'b10) ? int_pll_clock : xtal_clk;
ctech_clk_buf u_cpu_ref_clkbuf (.A (cpu_ref_clk_int), . X(cpu_ref_clk));
-//assign cpu_clk_int = (cfg_cpu_clk_div) ? cpu_clk_div : cpu_ref_clk;
-ctech_mux2x1 u_cpu_clk_sel (.A0 (cpu_ref_clk), .A1 (cpu_clk_div), .S (cfg_cpu_clk_div), .X (cpu_clk_int));
+ctech_clk_gate u_clkgate_cpu (.GATE (clk_enb), . CLK(cpu_clk_div), .GCLK(cpu_clk));
-ctech_clk_buf u_clkbuf_cpu (.A (cpu_clk_int), . X(cpu_clk));
+assign cpu_clk_div = (cfg_wb_clk_ratio == 2'b00) ? cpu_ref_clk :
+ (cfg_wb_clk_ratio == 2'b01) ? cpu_ref_clk_div_2 :
+ (cfg_wb_clk_ratio == 2'b10) ? cpu_ref_clk_div_4 : cpu_ref_clk_div_8;
-clk_ctl #(4) u_cpuclk (
+
+clk_div8 u_cpuclk (
// Outputs
- .clk_o (cpu_clk_div ),
+ .clk_div_8 (cpu_ref_clk_div_8 ),
+ .clk_div_4 (cpu_ref_clk_div_4 ),
+ .clk_div_2 (cpu_ref_clk_div_2 ),
// Inputs
- .mclk (cpu_ref_clk ),
- .reset_n (wbm_rst_n ),
- .clk_div_ratio (cfg_cpu_clk_ratio)
+ .mclk (cpu_ref_clk ),
+ .reset_n (p_reset_n )
);
-
-//----------------------------------
-// Generate RTC Clock Generation
-//----------------------------------
-wire rtc_clk_div;
-wire [7:0] cfg_rtc_clk_ratio = cfg_rtc_clk_ctrl[7:0];
-
-
-ctech_clk_buf u_clkbuf_rtc (.A (rtc_clk_div), . X(rtc_clk));
-
-clk_ctl #(7) u_rtcclk (
- // Outputs
- .clk_o (rtc_clk_div ),
- // Inputs
- .mclk (user_clock2 ),
- .reset_n (wbm_rst_n ),
- .clk_div_ratio (cfg_rtc_clk_ratio)
- );
-
-
-//----------------------------------
-// Generate USB Clock Generation
-//----------------------------------
-wire usb_clk_div;
-wire usb_ref_clk_int;
-wire usb_ref_clk;
-wire usb_clk_int;
-
-wire [1:0] cfg_usb_clk_sel_sel = cfg_usb_clk_ctrl[7:6];
-wire cfg_usb_clk_div = cfg_usb_clk_ctrl[5];
-wire [4:0] cfg_usb_clk_ratio = cfg_usb_clk_ctrl[4:0];
-
-assign usb_ref_clk_int = (cfg_usb_clk_sel_sel ==2'b00) ? user_clock1 :
- (cfg_usb_clk_sel_sel ==2'b01) ? user_clock2 :
- int_pll_clock;
-ctech_clk_buf u_usb_ref_clkbuf (.A (usb_ref_clk_int), . X(usb_ref_clk));
-//assign usb_clk_int = (cfg_usb_clk_div) ? usb_clk_div : usb_ref_clk;
-ctech_mux2x1 u_usb_clk_sel (.A0 (usb_ref_clk), .A1 (usb_clk_div), .S (cfg_usb_clk_div), .X (usb_clk_int));
-
-
-ctech_clk_buf u_clkbuf_usb (.A (usb_clk_int), . X(usb_clk));
-
-clk_ctl #(4) u_usbclk (
- // Outputs
- .clk_o (usb_clk_div ),
- // Inputs
- .mclk (usb_ref_clk ),
- .reset_n (wbm_rst_n ),
- .clk_div_ratio (cfg_usb_clk_ratio)
- );
-
endmodule
diff --git a/verilog/rtl/wb_host/src/wb_reset_fsm.sv b/verilog/rtl/wb_host/src/wb_reset_fsm.sv
new file mode 100644
index 0000000..23fd015
--- /dev/null
+++ b/verilog/rtl/wb_host/src/wb_reset_fsm.sv
@@ -0,0 +1,146 @@
+
+/*************************************************************************
+ This block control the reset sequence
+
+expected Reset removal sequence
+
+ _________ __________________________________________________
+ | |
+e_reset_n |________________|
+
+ ________ ________________________________________
+ XXXXXXXXX |
+p_reset_n XXXXXXXXX__________________________|
+
+
+ ____________
+ XXXXXXXXX |
+clk_enb XXXXXXXXX_____________________________________________________|
+
+ ____________
+ XXXXXXXXX |
+s_reset_n XXXXXXXXX________________________________________________________________|
+
+************************************************************************************************************/
+
+module wb_reset_fsm (
+ input logic clk ,
+ input logic e_reset_n , // external reset
+ input logic cfg_fast_sim ,
+ input logic soft_boot_req ,
+
+ output logic p_reset_n , // power-on reset
+ output logic s_reset_n , // soft reset
+ output logic clk_enb ,
+ output logic soft_reboot , // Indicate Soft Reboot
+ output logic force_refclk // Keep WBS in Ref clock during initial boot to strap loading
+
+);
+
+logic [2:0] state;
+logic [15:0] clk_cnt;
+
+parameter FSM_POWER_UP = 3'b000;
+parameter FSM_POWERON_RESET = 3'b001;
+parameter FSM_STRAP_LOAD = 3'b010;
+parameter FSM_STRAP_CLK_ENB = 3'b011;
+parameter FSM_DEASSERT_FORCE = 3'b100;
+parameter FSM_SOFT_RESET = 3'b101;
+parameter FSM_SOFT_BOOT_REQ = 3'b110;
+parameter FSM_CLK_EN_DEASSERT = 3'b111;
+
+logic boot_req_s,boot_req_ss;
+
+wire [15:0] clk_exit_cnt = (cfg_fast_sim) ? 100 : 60000;
+
+always @ (posedge clk or negedge e_reset_n) begin
+ if (e_reset_n == 1'b0) begin
+ boot_req_s <= 1'b0;
+ boot_req_ss <= 1'b0;
+ state <= FSM_POWER_UP;
+ s_reset_n <= 0;
+ p_reset_n <= 0;
+ clk_cnt <= 0;
+ soft_reboot <= 0;
+ clk_enb <= 0;
+ force_refclk <= 1;
+ end else begin
+ // Double Sync the incoming signal
+ boot_req_s <= soft_boot_req;
+ boot_req_ss <= boot_req_s;
+ case(state)
+ FSM_POWER_UP : begin
+ if(clk_cnt == clk_exit_cnt) begin
+ clk_cnt <= 0;
+ state <= FSM_STRAP_CLK_ENB;
+ end else begin
+ clk_cnt <= clk_cnt + 1;
+ end
+ end
+ FSM_STRAP_CLK_ENB : begin
+ if(clk_cnt == 15) begin
+ clk_enb <= 1;
+ clk_cnt <= 0;
+ state <= FSM_POWERON_RESET;
+ end else begin
+ clk_cnt <= clk_cnt + 1;
+ end
+ end
+ FSM_POWERON_RESET : begin
+ if(clk_cnt == 15) begin
+ p_reset_n <= 1;
+ clk_cnt <= 0;
+ state <= FSM_DEASSERT_FORCE;
+ end else begin
+ clk_cnt <= clk_cnt + 1;
+ end
+ end
+
+ FSM_DEASSERT_FORCE : begin
+ if(clk_cnt == 15) begin
+ force_refclk <= 0;
+ clk_cnt <= 0;
+ state <= FSM_SOFT_RESET;
+ end else begin
+ clk_cnt <= clk_cnt + 1;
+ end
+ end
+
+ FSM_SOFT_RESET : begin
+ if(clk_cnt == 15) begin
+ s_reset_n <= 1;
+ clk_cnt <= 0;
+ state <= FSM_SOFT_BOOT_REQ;
+ end else begin
+ clk_cnt <= clk_cnt + 1;
+ end
+ end
+ FSM_SOFT_BOOT_REQ : begin
+ if(boot_req_ss) begin
+ soft_reboot <= 1;
+ clk_cnt <= 0;
+ force_refclk <= 1;
+ clk_enb <= 0;
+ state <= FSM_CLK_EN_DEASSERT;
+ end
+ end
+ // Disable clock to avoid to block all transation
+ FSM_CLK_EN_DEASSERT : begin
+ if(clk_cnt == 15) begin
+ s_reset_n <= 0;
+ clk_enb <= 1;
+ clk_cnt <= 0;
+ state <= FSM_SOFT_RESET;
+ end else begin
+ clk_cnt <= clk_cnt + 1;
+ end
+ end
+
+ endcase
+
+ end
+end
+
+
+
+endmodule
diff --git a/verilog/rtl/wb_interconnect/src/wb_interconnect.sv b/verilog/rtl/wb_interconnect/src/wb_interconnect.sv
index 7e348fc..e595919 100644
--- a/verilog/rtl/wb_interconnect/src/wb_interconnect.sv
+++ b/verilog/rtl/wb_interconnect/src/wb_interconnect.sv
@@ -203,7 +203,7 @@
input logic s2_wbd_ack_i,
// input logic s2_wbd_err_i, - unused
output logic [31:0] s2_wbd_dat_o,
- output logic [8:0] s2_wbd_adr_o, // glbl reg need only 9 bits
+ output logic [9:0] s2_wbd_adr_o, // glbl reg need only 9 bits
output logic [3:0] s2_wbd_sel_o,
output logic s2_wbd_we_o,
output logic s2_wbd_cyc_o,
@@ -677,7 +677,7 @@
assign s1_wbd_stb_o = s1_wb_wr.wbd_stb ;
assign s2_wbd_dat_o = s2_wb_wr.wbd_dat ;
- assign s2_wbd_adr_o = s2_wb_wr.wbd_adr[8:0] ; // Global Reg Need 8 bit
+ assign s2_wbd_adr_o = s2_wb_wr.wbd_adr[9:0] ; // Global Reg Need 8 bit
assign s2_wbd_sel_o = s2_wb_wr.wbd_sel ;
assign s2_wbd_we_o = s2_wb_wr.wbd_we ;
assign s2_wbd_cyc_o = s2_wb_wr.wbd_cyc ;
diff --git a/verilog/rtl/yifive/ycr2c b/verilog/rtl/yifive/ycr2c
index 1c7c248..c9d988c 160000
--- a/verilog/rtl/yifive/ycr2c
+++ b/verilog/rtl/yifive/ycr2c
@@ -1 +1 @@
-Subproject commit 1c7c248e0fbf41b2db64a746a61651742c9120c7
+Subproject commit c9d988cbb4df50e5528ff6cb990010a33d0f597c
