| commit | 87b9e5453bac9a2e1c5535bae39745d89e57ea2d | [log] [tgz] |
|---|---|---|
| author | Jeff DiCorpo <jeffdi@efabless.com> | Sat Dec 17 13:15:58 2022 -0800 |
| committer | Jeff DiCorpo <jeffdi@efabless.com> | Sat Dec 17 13:15:58 2022 -0800 |
| tree | d668737fc313b250d1c081761bd669222e1c932d | |
| parent | 4e64a763abee93fc505bac3df56d0c00b9fe330d [diff] |
final gds oasis
| :exclamation: Important Note |
|---|
The openGFX430 is a synthesizable Graphic controller written in Verilog and tailored for the openMSP430 core.
The openMSP430 is a synthesizable 16bit microcontroller core written in Verilog. It is compatible with Texas Instruments' MSP430 microcontroller family and can execute the code generated by any MSP430 toolchain in a near cycle accurate way.
The core comes with some peripherals (16x16 Hardware Multiplier, Watchdog, GPIO, TimerA, generic templates), with a DMA interface, and most notably with a two-wire Serial Debug Interface supporting the MSPGCC GNU Debugger (GDB) for in-system software debugging.
While being fully FPGA friendly, this design is also particularly suited for ASIC implementations (typically mixed signal ICs with strong area and low-power requirements). In a nutshell, the openMSP430 brings with it:
Support following graphic modes:
