| # xschemrc configuration file |
| |
| set XSCHEM_SKYDIR /tools/xschem_library/xschem_sky130 |
| #set XSCHEM_SKYDIR /pdk/open_pdks/install/share/pdk/sky130A/libs.tech/xschem |
| |
| ########################################################################### |
| ## xschem installation directory XSCHEM_SHAREDIR |
| ########################################################################### |
| |
| # normally there is no reason to set this variable if using standard |
| # installation. Location of files is set at compile time but may be overridden |
| # with following line: |
| # |
| # set XSCHEM_SHAREDIR $env(HOME)/share/xschem |
| set XSCHEM_SHAREDIR /tools/xschem/install/share/xschem |
| |
| ########################################################################### |
| ## xschem system-wide design library paths XSCHEM_LIBRARY_PATH |
| ########################################################################### |
| |
| #### get library paths in a filesystem-independent way |
| |
| set XSCHEM_LIBRARY_PATH {} |
| append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/xschem_library/devices |
| append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/xschem_library |
| append XSCHEM_LIBRARY_PATH :/pdk/open_pdks/install/share/pdk/sky130A/libs.tech/xschem |
| #append XSCHEM_LIBRARY_PATH :${XSCHEM_SKYDIR} |
| append XSCHEM_LIBRARY_PATH :$env(PROJECT_ROOT) |
| |
| append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/../doc/xschem/examples |
| append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/../doc/xschem/ngspice |
| append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/../doc/xschem/xschem_simulator |
| append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/../doc/xschem/rom8k |
| append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/../doc/xschem/logic |
| append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/../doc/xschem/pcb |
| append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/../doc/xschem/binto7seg |
| append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/../doc/xschem/symgen |
| append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/../doc/xschem/xTAG |
| append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/../doc/xschem/rulz-r8c33 |
| append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/../doc/xschem/gschem_import |
| append XSCHEM_LIBRARY_PATH :${XSCHEM_SHAREDIR}/../doc/xschem/gschem_import/sym |
| |
| |
| |
| ########################################################################### |
| ## set custom colors for xschem libraries matching certain patterns |
| ## each line contains a dircolor(pattern) followed by a color |
| ## color can be an ordinary name (grey, brown, blue) or a hex code {#77aaff} |
| ## hex code must be enclosed in braces |
| ########################################################################### |
| array unset dircolor |
| set dircolor(sky130_fd_pr$) blue |
| set dircolor(sky130_tests$) blue |
| set dircolor(xschem_sky130$) blue |
| set dircolor(xschem_library$) red |
| set dircolor(devices$) red |
| |
| |
| ########################################################################### |
| ## Window to open on startup XSCHEM_START_WINDOW |
| ########################################################################### |
| |
| # Start with a design if no filename given: |
| # |
| set XSCHEM_START_WINDOW {sky130_tests/top.sch} |
| |
| # Start with a design |
| # To avoid absolute paths, use a path that is relative to one of the |
| # XSCHEM_LIBRARY_PATH directories. |
| # |
| # set XSCHEM_START_WINDOW {0_examples_top.sch} |
| |
| |
| ########################################################################### |
| ## Directory where simulations, netlist and simulator outputs are placed |
| ########################################################################### |
| # If unset $USER_CONF_DIR/simulations is assumed (normally ~/.xschem/simulations) |
| # |
| # set netlist_dir $env(HOME)/.xschem/simulations |
| |
| |
| ########################################################################### |
| ## change default [] with some other characters for bussed signals |
| ## in spice netlists (example: DATA[7] --> DATA<7>) |
| ########################################################################### |
| |
| set bus_replacement_char {<>} |
| |
| ## for XSPICE |
| # set bus_replacement_char {__} |
| |
| |
| ########################################################################### |
| ## some default behavior |
| ########################################################################### |
| |
| set netlist_type spice ;# allowed : spice, verilog, vhdl, tedax |
| set hspice_netlist 1 |
| set verilog_2001 1 |
| # set line_width 2 |
| set change_lw 1 |
| set color_ps 1 |
| set initial_geometry {900x600} |
| set unzoom_nodrift 0 |
| |
| ## if set to 1 allow to place multiple components with same name. |
| ## Warning: this is normally not allowed in any simulation netlist. |
| set disable_unique_names 0 |
| |
| ## if set to 1 continue drawing lines / wires after click |
| # set persistent_command 1 |
| |
| |
| ## set widget scaling (mainly for font display) |
| # set tk_scaling 1.7 |
| |
| ## disable some symbol layers |
| # set enable_layer(5) 0 ;# example to disable pin red boxes |
| |
| ########################################################################### |
| ## custom grid / snap value settings |
| ########################################################################### |
| |
| # set grid 100 |
| # set snap 50 |
| |
| ########################################################################### |
| ## Custom colors may be defined here |
| ########################################################################### |
| |
| # set cadlayers 22 |
| # set light_colors { |
| # "#ffffff" "#0044ee" "#aaaaaa" "#222222" "#229900" |
| # "#bb2200" "#00ccee" "#ff0000" "#888800" "#00aaaa" |
| # "#880088" "#00ff00" "#0000cc" "#666600" "#557755" |
| # "#aa2222" "#7ccc40" "#00ffcc" "#ce0097" "#d2d46b" |
| # "#ef6158" "#fdb200" } |
| |
| # set dark_colors { |
| # "#000000" "#00ccee" "#3f3f3f" "#cccccc" "#88dd00" |
| # "#bb2200" "#00ccee" "#ff0000" "#ffff00" "#ffffff" |
| # "#ff00ff" "#00ff00" "#0000cc" "#aaaa00" "#aaccaa" |
| # "#ff7777" "#bfff81" "#00ffcc" "#ce0097" "#d2d46b" |
| # "#ef6158" "#fdb200" } |
| |
| ########################################################################### |
| ## CAIRO STUFF |
| ########################################################################### |
| |
| #### Scale all fonts by this number |
| # set cairo_font_scale 1.0 |
| |
| #### default for following two is 0.85 (xscale) and 0.88 (yscale) to |
| #### match cairo font spacing |
| # set nocairo_font_xscale 1.0 |
| # set nocairo_font_yscale 1.0 |
| |
| #### Scale line spacing by this number |
| # set cairo_font_line_spacing 1.0 |
| |
| #### Specify a font |
| # set cairo_font_name {Arial} |
| |
| #### Lift up text by some zoom-corrected pixels for |
| #### better compatibility wrt no cairo version. |
| #### Useful values in the range [-1, 3] |
| # set cairo_vert_correct 0 |
| # set nocairo_vert_correct 0 |
| |
| ########################################################################### |
| ## KEYBINDINGS |
| ########################################################################### |
| |
| #### General format for specifying a replacement for a keybind |
| #### Replace Ctrl-d with Escape (so you wont kill the program) |
| # set replace_key(Control-d) Escape |
| |
| #### swap w and W keybinds; Always specify Shift for capital letters |
| # set replace_key(Shift-W) w |
| # set replace_key(w) Shift-W |
| |
| set terminal {xterm -geometry 100x35 -fn 9x15 -bg black -fg white -cr white -ms white } |
| ## lxterminal is not OK since it will not inherit env vars: |
| ## In order to reduce memory usage and increase the performance, all instances |
| ## of the terminal are sharing a single process. LXTerminal is part of LXDE |
| |
| #### editor must not detach from launching shell (-f mandatory for gvim) |
| # set editor { xterm -geometry 100x40 -e nano } |
| # set editor { xterm -geometry 100x40 -e pico } |
| # set editor {gvim -f -geometry 90x28} |
| set editor {vim -f -geometry 90x28} |
| # set editor {gedit} |
| |
| #### show info window (ERC rules errors warnings etc) |
| # set show_infowindow 1 |
| |
| #### command to translate xpm to png (assumes command takes source |
| #### and dest file as arguments, example: gm convert plot.xpm plot.png) |
| set to_png {gm convert} |
| |
| #### computer farm redirector |
| #### RTDA NC |
| # set computerfarm {nc run -Il} |
| #### LSF BSUB |
| # set computerfarm {bsub -Is} |
| |
| #### set xschem listening port |
| set xschem_listen_port 2021 |
| |
| #### set gaw address for socket connection: {host port} |
| set gaw_tcp_address {localhost 2020} |
| |
| #### utile (stefan's spice stimuli editor) |
| set utile_gui_path ${XSCHEM_SHAREDIR}/utile/utile3 |
| set utile_cmd_path ${XSCHEM_SHAREDIR}/utile/utile |
| |
| #### list of tcl files to preload. |
| # lappend tcl_files /home/schippes/x/Stefan_decoder/anddec.tcl |
| lappend tcl_files ${XSCHEM_SHAREDIR}/ngspice_backannotate.tcl |
| #lappend tcl_files ${XSCHEM_SKYDIR}/scripts/sky130_models.tcl |
| lappend tcl_files /pdk/open_pdks/install/share/pdk/sky130A/libs.tech/xschem/scripts/sky130_models.tcl |
| #### toolbar |
| set toolbar_visible 1 |
| |
| #set SKYWATER_MODELS $env(HOME)/skywater/skywater-pdk/libraries/sky130_fd_pr_ngspice/latest |
| #set SKYWATER_STDCELLS $env(HOME)/skywater/skywater-pdk/libraries/sky130_fd_sc_hs/latest |
| |
| #set SKYWATER_MODELS /pdk/open_pdks/sky130/sky130A/libs.tech/ngspice |
| #semiworking |
| #set SKYWATER_MODELS /pdk/open_pdks/sources/sky130-pdk/libraries/sky130_fd_pr/latest |
| set SKYWATER_MODELS /pdk/open_pdks/install/share/pdk/sky130A/libs.tech/ngspice |
| |
| #set SKYWATER_MODELS /pdk/open_pdks/install/share/pdk/sky130A/libs.ref/sky130_fd_pr |
| #set SKYWATER_MODELS /pdk/open_pdks/sources/sky130-pdk/libraries/sky130_fd_pr/latest |
| set SKYWATER_STDCELLS /pdk/open_pdks/install/share/pdk/sky130A/libs.ref/sky130_fd_sc_hd/spice |
