blob: 263ca6c1ecb0942a99cf7537daf03ba3bd7d647d [file] [log] [blame]
# SPDX-FileCopyrightText: 2020 Efabless Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# SPDX-License-Identifier: Apache-2.0
# Base Configurations. Don't Touch
# section begin
set ::env(PDK) $::env(PDK)
set ::env(STD_CELL_LIBRARY) "sky130_fd_sc_hd"
# YOU ARE NOT ALLOWED TO CHANGE ANY VARIABLES DEFINED IN THE FIXED WRAPPER CFGS
source $::env(DESIGN_DIR)/fixed_dont_change/fixed_wrapper_cfgs.tcl
# YOU CAN CHANGE ANY VARIABLES DEFINED IN THE DEFAULT WRAPPER CFGS BY OVERRIDING THEM IN THIS CONFIG.TCL
source $::env(DESIGN_DIR)/fixed_dont_change/default_wrapper_cfgs.tcl
set script_dir [file dirname [file normalize [info script]]]
set ::env(DESIGN_NAME) user_project_wrapper
#section end
# User Configurations
# save some time
set ::env(RUN_KLAYOUT_XOR) 0
set ::env(RUN_KLAYOUT_DRC) 0
# no point in running DRC with magic once openram is in because it will find 3M issues
# try to turn off all DRC checking so the flow completes and use precheck for DRC instead.
set ::env(MAGIC_DRC_USE_GDS) 0
set ::env(RUN_MAGIC_DRC) 0
set ::env(QUIT_ON_MAGIC_DRC) 0
set ::env(ROUTING_CORES) 4
# Define
set ::env(SYNTH_DEFINES) "MARMOT_EMPTY"
## Source Verilog Files
set ::env(VERILOG_FILES) "\
$::env(CARAVEL_ROOT)/verilog/rtl/defines.v \
$script_dir/../../verilog/rtl/user_project_wrapper.v"
## Clock configurations
set ::env(CLOCK_PORT) "wb_clk_i"
set ::env(CLOCK_PERIOD) "40"
#set ::env(BASE_SDC_FILE) $script_dir/base.sdc
### PDN
set ::env(PDN_CFG) $script_dir/pdn_cfg.tcl
set ::env(VDD_PIN) {vccd1}
set ::env(GND_PIN) {vssd1}
set ::env(FP_PDN_HPITCH) 180
set ::env(FP_PDN_HOFFSET) 50
## Internal Macros
### Macro PDN Connections
set ::env(FP_PDN_MACRO_HOOKS) "\
Marmot vccd1 vssd1 vccd1 vssd1"
### Macro Placement
set ::env(MACRO_PLACEMENT_CFG) $script_dir/macro.cfg
### Black-box verilog and views
set ::env(VERILOG_FILES_BLACKBOX) "\
$::env(CARAVEL_ROOT)/verilog/rtl/defines.v \
$script_dir/../../verilog/rtl/marmot/Marmot.v"
set ::env(EXTRA_LEFS) "\
$script_dir/../../lef/Marmot_del_met5.lef"
set ::env(EXTRA_GDS_FILES) "\
$script_dir/../../gds/Marmot.gds"
# set ::env(GLB_RT_MAXLAYER) 5
set ::env(RT_MAX_LAYER) {met4}
#set ::env(GLB_RT_ALLOW_CONGESTION) 1
# disable pdn check nodes becuase it hangs with multiple power domains.
# any issue with pdn connections will be flagged with LVS so it is not a critical check.
set ::env(FP_PDN_CHECK_NODES) 0
# The following is because there are no std cells in the example wrapper project.
set ::env(SYNTH_TOP_LEVEL) 1
set ::env(PL_RANDOM_GLB_PLACEMENT) 1
set ::env(PL_RESIZER_DESIGN_OPTIMIZATIONS) 0
set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) 0
set ::env(PL_RESIZER_BUFFER_INPUT_PORTS) 0
set ::env(PL_RESIZER_BUFFER_OUTPUT_PORTS) 0
set ::env(FP_PDN_ENABLE_RAILS) 0
set ::env(DIODE_INSERTION_STRATEGY) 0
set ::env(FILL_INSERTION) 0
set ::env(TAP_DECAP_INSERTION) 0
set ::env(CLOCK_TREE_SYNTH) 0
set ::env(CELL_PAD) 4