| # SPDX-FileCopyrightText: 2020 Efabless Corporation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| # section begin |
| set script_dir [file dirname [file normalize [info script]]] |
| |
| set ::env(DESIGN_NAME) sar_adc |
| #section end |
| set ::env(RUN_KLAYOUT) 0 |
| set ::env(DESIGN_IS_CORE) 0 |
| set ::env(FP_PDN_CORE_RING) 0 |
| |
| # User Configurations |
| set ::env(SYNTH_READ_BLACKBOX_LIB) 1 |
| |
| ## Source Verilog Files |
| set ::env(VERILOG_FILES) "\ |
| $script_dir/../../caravel/verilog/rtl/defines.v \ |
| $script_dir/../../verilog/rtl/sar_adc/SAR.sv \ |
| $script_dir/../../verilog/rtl/sar_adc/ACMP.sv \ |
| $script_dir/../../verilog/rtl/sar_adc/sar_adc.sv \ |
| $script_dir/../../verilog/rtl/sar_adc/adc_reg.sv \ |
| $script_dir/../../verilog/rtl/lib/registers.v" |
| |
| ## Clock configurations |
| set ::env(CLOCK_PORT) "clk" |
| set ::env(CLOCK_NET) "clk" |
| |
| set ::env(CLOCK_PERIOD) "100" |
| |
| set ::env(FP_PIN_ORDER_CFG) $script_dir/pin_order.cfg |
| set ::env(PDN_CFG) $script_dir/pdn.tcl |
| |
| set ::env(FP_SIZING) "absolute" |
| set ::env(DIE_AREA) "0 0 500 300" |
| |
| #set ::env(FP_HORIZONTAL_HALO) 15 |
| #set ::env(FP_VERTICAL_HALO) 15 |
| |
| #set ::env(GLB_RT_OBS) "met2 109.85000 19.89500 171.54500 69.22000" |
| set ::env(CLOCK_TREE_SYNTH) 0 |
| |
| set ::env(PL_TARGET_DENSITY) "0.01" |
| set ::env(GLB_RT_MAXLAYER) 5 |
| set ::env(GLB_RT_ADJUSTMENT) 0.15 |
| |
| set ::env(FP_PDN_CHECK_NODES) 0 |
| set ::env(FP_PDN_VPITCH) "45" |
| set ::env(FP_PDN_VWIDTH) "3.5" |
| # |
| set ::env(FP_PDN_HPITCH) "40" |
| set ::env(FP_PDN_HWIDTH) "6.5" |
| |
| set ::env(PL_RESIZER_DESIGN_OPTIMIZATIONS) 1 |
| set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) 1 |
| |
| set ::env(DIODE_INSERTION_STRATEGY) 4 |
| |
| #set ::env(FP_VERTICAL_HALO) "35" |
| #set ::env(FP_HERTICAL_HALO) "35" |
| |
| |
| ## Internal Macros |
| ### Macro Placement |
| #set ::env(MACRO_PLACEMENT_CFG) $script_dir/macro.cfg |
| |
| ### Black-box verilog and views |
| |
| set ::env(VDD_NETS) [list {vccd1} {vccd2}] |
| set ::env(GND_NETS) [list {vssd1} {vssd2}] |
| set ::env(SYNTH_USE_PG_PINS_DEFINES) "USE_POWER_PINS" |
| |
| ## LVS mismatch is to be solved manually by shorting VDD and VSS pins to the core ring |
| set ::env(QUIT_ON_LVS_ERROR) "1" |