| ############################################################################### |
| # Created by write_sdc |
| # Thu Nov 24 13:10:05 2022 |
| ############################################################################### |
| current_design dg_pll |
| ############################################################################### |
| # Timing Constraints |
| ############################################################################### |
| create_clock -name pll_control_clock -period 6.6667 [get_pins {ringosc.ibufp01/Y}] |
| set_clock_transition 0.1500 [get_clocks {pll_control_clock}] |
| set_clock_uncertainty -setup 0.5000 pll_control_clock |
| set_clock_uncertainty -hold 0.2500 pll_control_clock |
| set_propagated_clock [get_clocks {pll_control_clock}] |
| ############################################################################### |
| # Environment |
| ############################################################################### |
| set_load -pin_load 0.0334 [get_ports {clockp[1]}] |
| set_load -pin_load 0.0334 [get_ports {clockp[0]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {dco}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {enable}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {osc}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {resetb}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {div[4]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {div[3]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {div[2]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {div[1]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {div[0]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[25]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[24]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[23]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[22]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[21]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[20]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[19]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[18]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[17]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[16]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[15]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[14]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[13]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[12]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[11]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[10]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[9]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[8]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[7]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[6]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[5]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[4]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[3]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[2]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[1]}] |
| set_driving_cell -lib_cell sky130_fd_sc_hd__inv_8 -pin {Y} -input_transition_rise 0.0000 -input_transition_fall 0.0000 [get_ports {ext_trim[0]}] |
| set_timing_derate -early 0.9500 |
| set_timing_derate -late 1.0500 |
| ############################################################################### |
| # Design Rules |
| ############################################################################### |
| set_max_transition 1.0000 [current_design] |
| set_max_capacitance 0.2000 [current_design] |
| set_max_fanout 10.0000 [current_design] |