gls clean up
diff --git a/verilog/dv/user_mcore/Makefile b/verilog/dv/user_mcore/Makefile
index a7d9f3f..a3eb6d3 100644
--- a/verilog/dv/user_mcore/Makefile
+++ b/verilog/dv/user_mcore/Makefile
@@ -24,6 +24,7 @@
#######################################################################
DESIGNS?=../../..
+TOOLS?=/opt/riscv64i/
export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
## YIFIVE FIRMWARE
@@ -71,10 +72,12 @@
ifeq ($(DUMP),OFF)
iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
else
iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
endif
endif
diff --git a/verilog/dv/user_qspi/Makefile b/verilog/dv/user_qspi/Makefile
index c2b9689..da8c07b 100644
--- a/verilog/dv/user_qspi/Makefile
+++ b/verilog/dv/user_qspi/Makefile
@@ -65,10 +65,12 @@
ifeq ($(DUMP),OFF)
iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
else
iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
endif
endif
diff --git a/verilog/dv/user_sram_exec/Makefile b/verilog/dv/user_sram_exec/Makefile
index b0f31fc..628804e 100644
--- a/verilog/dv/user_sram_exec/Makefile
+++ b/verilog/dv/user_sram_exec/Makefile
@@ -24,6 +24,7 @@
#######################################################################
DESIGNS?=../../..
+TOOLS?=/opt/riscv64i/
export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
## YIFIVE FIRMWARE
@@ -70,10 +71,12 @@
ifeq ($(DUMP),OFF)
iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
else
iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
endif
endif
diff --git a/verilog/dv/user_sspi/Makefile b/verilog/dv/user_sspi/Makefile
index a161b2e..8ef867e 100644
--- a/verilog/dv/user_sspi/Makefile
+++ b/verilog/dv/user_sspi/Makefile
@@ -65,10 +65,12 @@
ifeq ($(DUMP),OFF)
iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
else
iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
endif
endif
diff --git a/verilog/dv/user_timer/Makefile b/verilog/dv/user_timer/Makefile
index 6d04ada..0cc574f 100644
--- a/verilog/dv/user_timer/Makefile
+++ b/verilog/dv/user_timer/Makefile
@@ -62,9 +62,17 @@
$< -o $@
endif
else
- iverilog -g2012 -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
- -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
+ ifeq ($(DUMP),OFF)
+ iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
+ else
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
+ $< -o $@
+ endif
endif
%.vcd: %.vvp
diff --git a/verilog/dv/user_timer/user_timer_tb.v b/verilog/dv/user_timer/user_timer_tb.v
index 8fced3c..b27d655 100644
--- a/verilog/dv/user_timer/user_timer_tb.v
+++ b/verilog/dv/user_timer/user_timer_tb.v
@@ -447,21 +447,21 @@
`ifdef GL
-wire wbd_spi_stb_i = u_top.u_spi_master.wbd_stb_i;
-wire wbd_spi_ack_o = u_top.u_spi_master.wbd_ack_o;
-wire wbd_spi_we_i = u_top.u_spi_master.wbd_we_i;
-wire [31:0] wbd_spi_adr_i = u_top.u_spi_master.wbd_adr_i;
-wire [31:0] wbd_spi_dat_i = u_top.u_spi_master.wbd_dat_i;
-wire [31:0] wbd_spi_dat_o = u_top.u_spi_master.wbd_dat_o;
-wire [3:0] wbd_spi_sel_i = u_top.u_spi_master.wbd_sel_i;
+wire wbd_spi_stb_i = u_top.u_qspi_master.wbd_stb_i;
+wire wbd_spi_ack_o = u_top.u_qspi_master.wbd_ack_o;
+wire wbd_spi_we_i = u_top.u_qspi_master.wbd_we_i;
+wire [31:0] wbd_spi_adr_i = u_top.u_qspi_master.wbd_adr_i;
+wire [31:0] wbd_spi_dat_i = u_top.u_qspi_master.wbd_dat_i;
+wire [31:0] wbd_spi_dat_o = u_top.u_qspi_master.wbd_dat_o;
+wire [3:0] wbd_spi_sel_i = u_top.u_qspi_master.wbd_sel_i;
-wire wbd_uart_stb_i = u_top.u_uart_i2c_usb.reg_cs;
-wire wbd_uart_ack_o = u_top.u_uart_i2c_usb.reg_ack;
-wire wbd_uart_we_i = u_top.u_uart_i2c_usb.reg_wr;
-wire [7:0] wbd_uart_adr_i = u_top.u_uart_i2c_usb.reg_addr;
-wire [7:0] wbd_uart_dat_i = u_top.u_uart_i2c_usb.reg_wdata;
-wire [7:0] wbd_uart_dat_o = u_top.u_uart_i2c_usb.reg_rdata;
-wire wbd_uart_sel_i = u_top.u_uart_i2c_usb.reg_be;
+wire wbd_uart_stb_i = u_top.u_uart_i2c_usb_spi.reg_cs;
+wire wbd_uart_ack_o = u_top.u_uart_i2c_usb_spi.reg_ack;
+wire wbd_uart_we_i = u_top.u_uart_i2c_usb_spi.reg_wr;
+wire [8:0] wbd_uart_adr_i = u_top.u_uart_i2c_usb_spi.reg_addr;
+wire [7:0] wbd_uart_dat_i = u_top.u_uart_i2c_usb_spi.reg_wdata;
+wire [7:0] wbd_uart_dat_o = u_top.u_uart_i2c_usb_spi.reg_rdata;
+wire wbd_uart_sel_i = u_top.u_uart_i2c_usb_spi.reg_be;
`endif
diff --git a/verilog/dv/user_uart1/Makefile b/verilog/dv/user_uart1/Makefile
index 928d873..8ef2e69 100644
--- a/verilog/dv/user_uart1/Makefile
+++ b/verilog/dv/user_uart1/Makefile
@@ -71,10 +71,12 @@
ifeq ($(DUMP),OFF)
iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
else
iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
endif
endif
diff --git a/verilog/dv/user_uart_master/Makefile b/verilog/dv/user_uart_master/Makefile
index 5eccb5b..5bae64b 100644
--- a/verilog/dv/user_uart_master/Makefile
+++ b/verilog/dv/user_uart_master/Makefile
@@ -63,10 +63,12 @@
ifeq ($(DUMP),OFF)
iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
else
iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
endif
endif
diff --git a/verilog/dv/user_usb/Makefile b/verilog/dv/user_usb/Makefile
index 0d9eaf4..73ce5e7 100644
--- a/verilog/dv/user_usb/Makefile
+++ b/verilog/dv/user_usb/Makefile
@@ -65,10 +65,12 @@
ifeq ($(DUMP),OFF)
iverilog -g2012 -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
else
- iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DGL -I $(PDK_PATH) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DUSE_POWER_PINS -DGL -I $(PDK_PATH) \
-f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.lib \
$< -o $@
endif
endif
diff --git a/verilog/includes/includes.gl.lib b/verilog/includes/includes.gl.lib
new file mode 100644
index 0000000..fef7294
--- /dev/null
+++ b/verilog/includes/includes.gl.lib
@@ -0,0 +1,10 @@
+###########################################################
+# STD CELLS - they need to be below the defines.v files
+###########################################################
+-v $(PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/verilog/sky130_fd_io.v
+-v $(PDK_ROOT)/sky130A/libs.ref/sky130_fd_io/verilog/sky130_ef_io.v
+-v $(PDK_ROOT)/sky130A/libs.ref/sky130_fd_sc_hd/verilog/primitives.v
+-v $(PDK_ROOT)/sky130A/libs.ref/sky130_fd_sc_hd/verilog/sky130_fd_sc_hd.v
+-v $(PDK_ROOT)/sky130A/libs.ref/sky130_fd_sc_hvl/verilog/primitives.v
+-v $(PDK_ROOT)/sky130A/libs.ref/sky130_fd_sc_hvl/verilog/sky130_fd_sc_hvl.v
+
