Update
diff --git a/verilog/rtl/BrqRV_EB1/sky130_sram_1kbyte_1rw1r_32x256_8.v b/verilog/rtl/BrqRV_EB1/sky130_sram_1kbyte_1rw1r_32x256_8.v
deleted file mode 100644
index aac2053..0000000
--- a/verilog/rtl/BrqRV_EB1/sky130_sram_1kbyte_1rw1r_32x256_8.v
+++ /dev/null
@@ -1,129 +0,0 @@
-// SPDX-FileCopyrightText: 2020 Efabless Corporation
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-// http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-// SPDX-License-Identifier: Apache-2.0
-
-// OpenRAM SRAM model
-// Words: 256
-// Word size: 32
-// Write size: 8
-
-module sky130_sram_1kbyte_1rw1r_32x256_8(
-`ifdef USE_POWER_PINS
- vccd1,
- vssd1,
-`endif
-// Port 0: RW
- clk0,csb0,web0,wmask0,addr0,din0,dout0,
-// Port 1: R
- clk1,csb1,addr1,dout1
- );
-
- parameter NUM_WMASKS = 4 ;
- parameter DATA_WIDTH = 32 ;
- parameter ADDR_WIDTH = 8 ;
- parameter RAM_DEPTH = 1 << ADDR_WIDTH;
- // FIXME: This delay is arbitrary.
- parameter DELAY = 3 ;
- parameter VERBOSE = 1 ; //Set to 0 to only display warnings
- parameter T_HOLD = 1 ; //Delay to hold dout value after posedge. Value is arbitrary
-
-`ifdef USE_POWER_PINS
- inout vccd1;
- inout vssd1;
-`endif
- input clk0; // clock
- input csb0; // active low chip select
- input web0; // active low write control
- input [NUM_WMASKS-1:0] wmask0; // write mask
- input [ADDR_WIDTH-1:0] addr0;
- input [DATA_WIDTH-1:0] din0;
- output [DATA_WIDTH-1:0] dout0;
- input clk1; // clock
- input csb1; // active low chip select
- input [ADDR_WIDTH-1:0] addr1;
- output [DATA_WIDTH-1:0] dout1;
-
- reg csb0_reg;
- reg web0_reg;
- reg [NUM_WMASKS-1:0] wmask0_reg;
- reg [ADDR_WIDTH-1:0] addr0_reg;
- reg [DATA_WIDTH-1:0] din0_reg;
- reg [DATA_WIDTH-1:0] dout0;
-
- // All inputs are registers
- always @(posedge clk0)
- begin
- csb0_reg = csb0;
- web0_reg = web0;
- wmask0_reg = wmask0;
- addr0_reg = addr0;
- din0_reg = din0;
- //#(T_HOLD) dout0 = 32'bx;
- if ( !csb0_reg && web0_reg && VERBOSE )
- $display($time," Reading %m addr0=%b dout0=%b",addr0_reg,mem[addr0_reg]);
- if ( !csb0_reg && !web0_reg && VERBOSE )
- $display($time," Writing %m addr0=%b din0=%b wmask0=%b",addr0_reg,din0_reg,wmask0_reg);
- end
-
- reg csb1_reg;
- reg [ADDR_WIDTH-1:0] addr1_reg;
- reg [DATA_WIDTH-1:0] dout1;
-
- // All inputs are registers
- always @(posedge clk1)
- begin
- csb1_reg = csb1;
- addr1_reg = addr1;
- if (!csb0 && !web0 && !csb1 && (addr0 == addr1))
- $display($time," WARNING: Writing and reading addr0=%b and addr1=%b simultaneously!",addr0,addr1);
- //#(T_HOLD) dout1 = 32'bx;
- if ( !csb1_reg && VERBOSE )
- $display($time," Reading %m addr1=%b dout1=%b",addr1_reg,mem[addr1_reg]);
- end
-
-reg [DATA_WIDTH-1:0] mem [0:RAM_DEPTH-1];
-
- // Memory Write Block Port 0
- // Write Operation : When web0 = 0, csb0 = 0
- always @ (negedge clk0)
- begin : MEM_WRITE0
- if ( !csb0_reg && !web0_reg ) begin
- if (wmask0_reg[0])
- mem[addr0_reg][7:0] = din0_reg[7:0];
- if (wmask0_reg[1])
- mem[addr0_reg][15:8] = din0_reg[15:8];
- if (wmask0_reg[2])
- mem[addr0_reg][23:16] = din0_reg[23:16];
- if (wmask0_reg[3])
- mem[addr0_reg][31:24] = din0_reg[31:24];
- end
- end
-
- // Memory Read Block Port 0
- // Read Operation : When web0 = 1, csb0 = 0
- always @ (negedge clk0)
- begin : MEM_READ0
- if (!csb0_reg && web0_reg)
- dout0 <= #(DELAY) mem[addr0_reg];
- end
-
- // Memory Read Block Port 1
- // Read Operation : When web1 = 1, csb1 = 0
- always @ (negedge clk1)
- begin : MEM_READ1
- if (!csb1_reg)
- dout1 <= #(DELAY) mem[addr1_reg];
- end
-
-endmodule
diff --git a/verilog/rtl/uprj_netlists.v b/verilog/rtl/uprj_netlists.v
index ab93879..7aca33c 100644
--- a/verilog/rtl/uprj_netlists.v
+++ b/verilog/rtl/uprj_netlists.v
@@ -24,7 +24,6 @@
`include "gl/user_project_wrapper.v"
`include "gl/user_proj_example.v"
`else
- `include "BrqRV_EB1/sky130_sram_1kbyte_1rw1r_32x256_8.v"
// for netlist verification
//`include "../gl/user_project_wrapper.v"
diff --git a/verilog/rtl/user_proj_example.v b/verilog/rtl/user_proj_example.v
index 7122d31..b03a01f 100644
--- a/verilog/rtl/user_proj_example.v
+++ b/verilog/rtl/user_proj_example.v
@@ -443,8 +443,8 @@
.dec_tlu_perfcnt3 (),
// remove mems DFT pins for opensource
- .dccm_ext_in_pkt ( 24'b0),
- .iccm_ext_in_pkt ( 24'b0),
+ .dccm_ext_in_pkt ( 48'b0),
+ .iccm_ext_in_pkt ( 48'b0),
.ic_data_ext_in_pkt ( 48'b0),
.ic_tag_ext_in_pkt ( 24'b0),
