Add files via upload
diff --git a/openlane/user_proj_example/config.json b/openlane/user_proj_example/config.json
new file mode 100644
index 0000000..a7671cd
--- /dev/null
+++ b/openlane/user_proj_example/config.json
@@ -0,0 +1,19 @@
+{
+ "CARAVEL_ROOT" : "../../caravel",
+ "CLOCK_NET" : "counter.clk",
+ "CLOCK_PERIOD" : "10",
+ "CLOCK_PORT" : "wb_clk_i",
+ "DESIGN_IS_CORE" : "0",
+ "DESIGN_NAME" : "user_proj_example",
+ "DIE_AREA" : "0 0 900 600",
+ "DIODE_INSERTION_STRATEGY" : "4",
+ "FP_PIN_ORDER_CFG" : "pin_order.cfg",
+ "FP_SIZING" : "absolute",
+ "GLB_RT_MAXLAYER" : "5",
+ "GND_NETS" : "vssd1",
+ "PL_BASIC_PLACEMENT" : "1",
+ "PL_TARGET_DENSITY" : "0.05",
+ "RUN_CVC" : "1",
+ "VDD_NETS" : "vccd1",
+ "VERILOG_FILES" : ["../../caravel/verilog/rtl/defines.v", "../../verilog/rtl/user_proj_example.v"]
+}
diff --git a/openlane/user_proj_example/config.tcl b/openlane/user_proj_example/config.tcl
new file mode 100644
index 0000000..fc08a70
--- /dev/null
+++ b/openlane/user_proj_example/config.tcl
@@ -0,0 +1,50 @@
+# SPDX-FileCopyrightText: 2020 Efabless Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# SPDX-License-Identifier: Apache-2.0
+
+set script_dir [file dirname [file normalize [info script]]]
+
+set ::env(DESIGN_NAME) user_proj_example
+
+set ::env(VERILOG_FILES) "\
+ $::env(CARAVEL_ROOT)/verilog/rtl/defines.v \
+ $script_dir/../../verilog/rtl/user_proj_example.v"
+
+set ::env(DESIGN_IS_CORE) 0
+
+set ::env(CLOCK_PORT) "wb_clk_i"
+set ::env(CLOCK_NET) ""
+set ::env(CLOCK_PERIOD) "30"
+
+set ::env(FP_SIZING) absolute
+set ::env(DIE_AREA) "0 0 900 600"
+
+set ::env(FP_PIN_ORDER_CFG) $script_dir/pin_order.cfg
+
+set ::env(PL_BASIC_PLACEMENT) 1
+set ::env(PL_TARGET_DENSITY) 0.05
+
+# Maximum layer used for routing is metal 4.
+# This is because this macro will be inserted in a top level (user_project_wrapper)
+# where the PDN is planned on metal 5. So, to avoid having shorts between routes
+# in this macro and the top level metal 5 stripes, we have to restrict routes to metal4.
+set ::env(GLB_RT_MAXLAYER) 5
+
+# You can draw more power domains if you need to
+set ::env(VDD_NETS) [list {vccd1}]
+set ::env(GND_NETS) [list {vssd1}]
+
+set ::env(DIODE_INSERTION_STRATEGY) 4
+# If you're going to use multiple power domains, then disable cvc run.
+set ::env(RUN_CVC) 1
diff --git a/openlane/user_proj_example/pin_order.cfg b/openlane/user_proj_example/pin_order.cfg
new file mode 100644
index 0000000..2fda806
--- /dev/null
+++ b/openlane/user_proj_example/pin_order.cfg
@@ -0,0 +1,10 @@
+#BUS_SORT
+
+#S
+wb_.*
+wbs_.*
+la_.*
+irq.*
+
+#N
+io_.*
