| # SPDX-FileCopyrightText: 2021 , Dinesh Annayya |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # SPDX-License-Identifier: Apache-2.0 |
| # SPDX-FileContributor: Modified by Dinesh Annayya <dinesha@opencores.org> |
| |
| |
| set_units -time ns |
| set ::env(WB_CLOCK_PERIOD) "10" |
| set ::env(WB_CLOCK_PORT) "mclk" |
| |
| set ::env(SPI_CLOCK_PORT) "spiclk" |
| set ::env(SPI_CLOCK_PERIOD) "20" |
| |
| ###################################### |
| # WB Clock domain input output |
| ###################################### |
| create_clock [get_ports $::env(WB_CLOCK_PORT)] -name $::env(WB_CLOCK_PORT) -period $::env(WB_CLOCK_PERIOD) |
| |
| create_generated_clock -name $::env(SPI_CLOCK_PORT) -source [get_ports $::env(WB_CLOCK_PORT)] -master_clock $::env(WB_CLOCK_PORT) -divide_by 2 -add -comment "SPI Clock Out" [get_port spi_clk] |
| |
| set wb_input_delay_value [expr $::env(WB_CLOCK_PERIOD) * 0.6] |
| set wb_output_delay_value [expr $::env(WB_CLOCK_PERIOD) * 0.6] |
| puts "\[INFO\]: Setting wb output delay to:$wb_output_delay_value" |
| puts "\[INFO\]: Setting wb input delay to: $wb_input_delay_value" |
| |
| |
| set_input_delay 2.0 -clock [get_clocks $::env(WB_CLOCK_PORT)] {rst_n} |
| |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wbd_stb_i*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wbd_adr_i*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wbd_we_i*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wbd_dat_i*] |
| set_input_delay $wb_input_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wbd_sel_i*] |
| |
| |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wbd_dat_o*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wbd_ack_o*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port wbd_err_o*] |
| set_output_delay $wb_output_delay_value -clock [get_clocks $::env(WB_CLOCK_PORT)] [get_port spi_debug*] |
| |
| ### SPI I/F constaints |
| set spi_input_delay_value [expr $::env(SPI_CLOCK_PERIOD) * 0.6] |
| set spi_output_delay_value [expr $::env(SPI_CLOCK_PERIOD) * 0.6] |
| |
| set_input_delay 6 -max -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_sdi[3]] |
| set_input_delay 6 -max -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_sdi[2]] |
| set_input_delay 6 -max -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_sdi[1]] |
| set_input_delay 6 -max -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_sdi[0]] |
| |
| set_input_delay 0 -min -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_sdi[3]] |
| set_input_delay 0 -min -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_sdi[2]] |
| set_input_delay 0 -min -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_sdi[1]] |
| set_input_delay 0 -min -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_sdi[0]] |
| |
| #io_out[0] is spiclcok |
| #set_output_delay $wb_output_delay_value -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port io_out[0]] |
| set_output_delay 6 -max -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_csn0] |
| set_output_delay 6 -max -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_sdo[3]] |
| set_output_delay 6 -max -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_sdo[2]] |
| set_output_delay 6 -max -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_sdo[1]] |
| |
| |
| set_output_delay -0.5 -min -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_csn0] |
| set_output_delay -0.5 -min -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_sdo[3]] |
| set_output_delay -0.5 -min -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_sdo[2]] |
| set_output_delay -0.5 -min -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_sdo[1]] |
| set_output_delay -0.5 -min -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_sdo[0]] |
| |
| # Chip select asserted multiple cycle eariler than spi clock |
| set_output_delay 0 -min -clock [get_clocks $::env(SPI_CLOCK_PORT)] [get_port spi_csn0] |
| |
| |
| set_clock_uncertainty -from $::env(SPI_CLOCK_PORT) -to $::env(SPI_CLOCK_PORT) -setup 0.800 |
| set_clock_uncertainty -from $::env(WB_CLOCK_PORT) -to $::env(WB_CLOCK_PORT) -setup 0.800 |
| set_clock_uncertainty -from $::env(SPI_CLOCK_PORT) -to $::env(SPI_CLOCK_PORT) -hold 0.050 |
| set_clock_uncertainty -from $::env(WB_CLOCK_PORT) -to $::env(WB_CLOCK_PORT) -hold 0.050 |
| |
| # TODO set this as parameter |
| set_driving_cell -lib_cell $::env(SYNTH_DRIVING_CELL) -pin $::env(SYNTH_DRIVING_CELL_PIN) [all_inputs] |
| set cap_load [expr $::env(SYNTH_CAP_LOAD) / 1000.0] |
| puts "\[INFO\]: Setting load to: $cap_load" |
| set_load $cap_load [all_outputs] |
| |
