| commit | f60ad6ce67e37a4d2e8020fb8aad983682858024 | [log] [tgz] |
|---|---|---|
| author | Jeff DiCorpo <jeffdi@efabless.com> | Wed Dec 29 02:24:51 2021 -0800 |
| committer | Jeff DiCorpo <jeffdi@efabless.com> | Wed Dec 29 02:24:51 2021 -0800 |
| tree | 37f360490f72fbd61bd313875c8d1728356208ab | |
| parent | 81a7b91a59e85699d1dba9bbf597ff34eaea92f8 [diff] |
final gds oasis
This repository aims at design of SRAM cell array with a configuration of 1.8 V operating voltage and access time less than 2.5ns using Google SkyWater SKY130 PDKs and OpenRAM memory complier.
Static Random-Access Memory (SRAM) has become a standard element of any Application Specific Integrated Circuit (ASIC), System-On-Chip (SoC), or other micro-architectures. For this wide variety of applications, SRAMs are configured using parameters like the word-length, bit lines, operating voltage, access time, and most importantly the technology node. The access time of an SRAM cell is the time require for a read or write operation of SRAM.
Manually configuring the SRAM for every change in parameter seems a slightly in-efficient and tedious task. Due to this reason, the memory compiler is used on a large scale, as it facilitates easy configuration and optimization of memory. OpenRAM, an open-source memory compiler is used for characterization and generation of SRAM designs.
The specifications of a 8Kbits (32 x 256) SRAM generated using OpenRAM compiler and SKY130 PDKs are mentioned below:
This repository mentioned multiple open-source circuit schematic design, layout design, SPICE simulations tools and memory compiler. The tools used and their installation is explained in details below. All the SkyWater SKY130 PDKs related files are added to the repository, which can be used without installing the complete PDKs. In order to install or get other details of SkyWater PDKs, it can be found here.
pip3 install numpy)pip3 install scipy)git clone https://github.com/VLSIDA/OpenRAM.git
export OPENRAM_HOME="$(pwd)/compiler"
export OPENRAM_TECH="$(pwd)/technology"
The detailed OpenRAM configuration, usage and issues for SKY130 pdk is documented in this section.
After the installation is properly done. The directory structure of OpenRAM directory looks similar to that of mentioned.
├── OpenRAM | ├── compiler | ├── technologies | ├── freepdk45 (available with compiler) | ├── scn4m_subm (available with compiler) | ├── sky130A
The sky130A directory is not available by default. You need to create it in order to add support for SkyWater PDK Sky130. The detailed contents and their description is explained further in the document. Also, the configure sky130A directory is included in the repository for reference. It can be found at OpenRAM/sky130A/
The OpenRAM compiler is currently available for two technologies, namely - SCMOS and FreePDK45. For adding a new technology support to OpenRAM, a directory with name of process node should be created in technology directory of OpenRAM.
The technology directory should contains following information.
├── technology | ├── sky130A | ├── gds_lib | ├── sp_lib | ├── mag_lib (optional) | ├── models | ├── layers.map (can be included in another sub-directory) | ├── tech | ├── __init__.py | ├── tech.py | ├── sky130A.tech
gds_lib directoryThis directory contains all the custom premade library cells in .gds file format. Following files should be listed in the gds_lib directory:
sp_lib directoryThis directory contains all the spice netlsits of custom premade library cells in .sp file format.
models directoryThis directory contains all the NMOS and PMOS models for temperatures, voltages and process corners as per requirement. This repository contains the nfet and pfet models for all process corners operating at 1.8 V.
layers.mapThis file contains the layer description for gds layers. It needs to be generated from the SKY130 PDK document provided by SkyWater. You can find the document here.
The layers.map should be organized in a specific syntax. Here, each layer is given on a separate line in below mentioned format:
<layer-name> <purpose-of-layer> <GDS-layer> <GDS-purpose>
The layers.map file is added to the repository and can be found here.
tech/ DirectoryThis directory should contains two mandatory file listed below. Any other optional scripts can also be included if required.
tech/sky130A.techtech/tech.pytech/sky130A.techThis is the technology file provided by SkyWater in the SKY130 PDKs. It needs to copied to this tech directory. The sky130A.tech technology file is added to the repository.
tech/tech.pyThis python file contains all the technology related configuration. It contains information about below mentioned paramaters.
The sample OpenRAM configurations are added to the repository. To use it, copy the sky130A directory into the technology directory of OpenRAM.
cp -rf OpenRAM/sky130A $OPENRAM_TECH/
A configuration file need to be generated in python which contains all parameters required for the compiler. Every parameter mentioned in the configuration file overrides the default value of the parameter. If a parameter is not mentioned in the file, compiler will take a default value.
A template file named myconfig_sky130.py is added in the repository. The file contains parameters as given below.
# Data word size
word_size = 32
# Number of words in the memory
num_words = 1024
# Technology to use in $OPENRAM_TECH
tech_name = "sky130A"
# You can use the technology nominal corner only
#nominal_corner_only = True
# Or you can specify particular corners
# Process corners to characterize
process_corners = ["TT"]
# Voltage corners to characterize
supply_voltages = [ 1.8 ]
# Temperature corners to characterize
# temperatures = [ 0, 25 100]
# Output directory for the results
output_path = "temp"
# Output file base name
output_name = "sram_{0}_{1}_{2}".format(word_size,num_words,tech_name)
# Disable analytical models for full characterization (WARNING: slow!)
# analytical_delay = False
OpenRAM is invoked using the following command
python3 $OPENRAM_HOME/openram.py myconfig_sky130 or python3 $OPENRAM_HOME/openram.py myconfig_sky130.py
The Layout for 2 X 16 SRAM cell is show below. The detailed report can be found here
The snippet shows the SRAM integrated in the layout of the user_project_wrapper in caravel project.
As the name says, 6T SRAM cell consists of 6 MOSFETS - 2 PMOS and 4 NMOS. It is design by cross coupling two CMOS inverters which hold the bit, and two access transistor for enabling the access to the cross coupled inverters.
The figure below shows the schematic of the generic 6T SRAM cell. Here, M1, M2 make the first inverter; M3, M4 make the second inverter and M5, M6 are the access transistors.
The read operation is a critical one in SRAM cell. This is becuase, before enabling the access transistors, the bit-lines are first pre-charged to high logic. Depending upon the bit store, one of the bit-line is pulled back to logic low when the access transistors are enabled.
$ ngspice Prelayout/Spice_models/SRAM_6T_Cell_read.spice
The bit to be written is first loaded to the bit-line and its inverted bit is loaded on the other bit-line. Once the access transistors are enabled the bit values on bit-lines are over-written on the inverter logic.
$ ngspice Prelayout/Spice_models/SRAM_6T_Cell_write.spice
Static Noise Margin
Static noise margin (SNM) is a key figure of merit for an SRAM cell. It can be extracted by nesting the largest possible square in the two voltage transfer curves (VTC) of the two CMOS inverters involved. The SNM is defined as the side-length of the square (i.e. diagonal-length), given in volts. When an external DC noise is larger than the SNM, the state of the SRAM cell can change and data is lost.
$ ngspice Prelayout/Spice_models/SRAM_Cell_hold_snm.spice
$ ngspice Prelayout/Spice_models/SRAM_Cell_read_snm.spice
$ ngspice Prelayout/Spice_models/SRAM_Cell_write_snm.spice
N-Curve N-curve is a metric used for inline testers. It gives information for both voltage and current, and in addition it has no voltage scaling delimiter as found in SNM approach. It also has the complete information about the SRAM stability and also write ability in a single plot. N-curve can be further extended to power metrics in which both the voltage and current information are taken into consideration to provide better stability analysis of the SRAM cell.
$ ngspice Prelayout/Spice_models/SRAM_Cell_n_curve.spice
Static Voltage Noise Margin (SVNM): It is the voltage difference between point A and B. It indicates the maximum tolerable DC noise voltage of the cell before its content changes.
SVNM = 0.5644 V
Static Current Noise Margin (SINM): It is the additional current information provided by the N-curve, namely the peak current located between point A and B. It can also be used to characterize the cell read stability.
SINM = 122.6 uA
Note: For better read stability, SVNM and SINM must be high value.
Write-Trip Voltage (WTV): It is the voltage difference between point C and B. It is the voltage drop needed to flip the internal node “1” of the cell with both the bit-lines clamped to VDD.
WTV = 0.9422 V
Write-Trip Current (WTI): It is the negative current peak between point C and B. It is the amount of current needed to write the cell when both bit-lines are kept at VDD.
WTI = -30.869 uA
This circuit block is used to pre-charge the bit-lines to Vdd or high logic during a read operation.
Shown below is the schematic and simulation of the Pre-charge circuit.
$ ngspice Prelayout/Spice_models/precharge_circuit.spice
Sense Amplifiers in SRAM generally a Differential Voltage Amplifier. They form a very important part of SRAM memory as these amplifiers define the robustness of the bit-lines sensing. The function of sense amplifier is to amplify the very small analog differential voltage between the bit-lines during a read operation and provide a digital output. This effectively reduces the time required for the read operation, as each individual cell need not fully discharge the bit line.
Shown below is the schematic and simulation of a Sense Amplifier.
$ ngspice Prelayout/Spice_models/sense_amplifier.spice
As discussed in read operation, the bit-lines are pre-charged to Vdd during the read operation. If a write operation occurs, one of the bit-lines should driven back to low logic before enabling access transistors. Write drivers are used for this purpose.
Shown below is the schematic and simulation of a Write Driver.
$ ngspice Prelayout/Spice_models/write_driver.spice
Tri-state buffer is a normal buffer with an extra enable input. Whenever, the enable input is high, tri-state buffer behaves as a normal buffer, otherwise it will either give high impedance or low logic as output.
Shown below is the schematic and simulation of a Tri-State Buffer.
$ ngspice Prelayout/Spice_models/tristate_buffer.spice
Shown below is the schematic and simulation of a Positive Edge triggered D-Flip-Flop.
$ ngspice Prelayout/Spice_models/d_ff.spice
1-bit SRAM comprises of a 6T SRAM cell, a sense amplifier, a write driver and a pre-charge circuit.
Read Operation
$ ngspice Prelayout/Spice_models/SRAM_1bit_read.spice
Write Operation
$ ngspice Prelayout/Spice_models/SRAM_1bit_write.spice
Layouts are created for all custom cells in Magic EDA with sky130A.tech (Technology file), layouts are checked for DRC violations and RC extracted to a postlayout spice netlist. Extracted postlayout spice netlist is backannotated, simlulated to verify and match the response with prelayout simulations. To perform simulations, enter the following command to change present working directory to “postlayout”. Follow later mentioned commands to simulate each netlist.
Layout Area: 29.70 um^2
-> Read Operation
-> Write Operation
Layout Area: 30.54 um^2
Layout Area: 84.89 um^2
Layout Area: 23.18 um^2
Layout Area: 60.25 um^2