removed unnecessary comments
diff --git a/verilog/rtl/user_proj_example.v b/verilog/rtl/user_proj_example.v
index a32800c..956b05e 100644
--- a/verilog/rtl/user_proj_example.v
+++ b/verilog/rtl/user_proj_example.v
@@ -98,22 +98,7 @@
// Assuming LA probes [65:64] are for controlling the count clk & reset
assign clk = wb_clk_i;
assign rst = wb_rst_i;
-/*
- counter #(
- .BITS(BITS)
- ) counter(
- .clk(clk),
- .reset(rst),
- .ready(wbs_ack_o),
- .valid(valid),
- .rdata(rdata),
- .wdata(wbs_dat_i),
- .wstrb(wstrb),
- .la_write(la_write),
- .la_input(la_data_in[63:32]),
- .count(count)
- );
-*/
+
UART_top top(
.system_clk(clk),
.system_rst(rst),
@@ -313,47 +298,5 @@
end
end
endmodule
-/*
-module counter #(
- parameter BITS = 32
-)(
- input clk,
- input reset,
- input valid,
- input [3:0] wstrb,
- input [BITS-1:0] wdata,
- input [BITS-1:0] la_write,
- input [BITS-1:0] la_input,
- output ready,
- output [BITS-1:0] rdata,
- output [BITS-1:0] count
-);
- reg ready;
- reg [BITS-1:0] count;
- reg [BITS-1:0] rdata;
- always @(posedge clk) begin
- if (reset) begin
- count <= 0;
- ready <= 0;
- end else begin
- ready <= 1'b0;
- if (~|la_write) begin
- count <= count + 1;
- end
- if (valid && !ready) begin
- ready <= 1'b1;
- rdata <= count;
- if (wstrb[0]) count[7:0] <= wdata[7:0];
- if (wstrb[1]) count[15:8] <= wdata[15:8];
- if (wstrb[2]) count[23:16] <= wdata[23:16];
- if (wstrb[3]) count[31:24] <= wdata[31:24];
- end else if (|la_write) begin
- count <= la_write & la_input;
- end
- end
- end
-
-endmodule
-*/
`default_nettype wire
