Spectravel - Spectrometer on Caravel

Block diagram of the Spectravel is given below and detailed explanation of the each block is given inside submodules spectrometer and wb2axip.

Global block scheme of the Spectravel

This directory contains following submodules and directories:

Submodule spectrometer - contains digital spectrometer generator with built in test structures designed in Chisel HDL
Submodule wb2axip - contains wishbone to AXI4 bridge. Current submodule is forked version of the ZipCPU/wb2axip
doc - contains global block scheme of the Spectravel block in svg and png format.
top/dv/SpectrometerTest - contains verilog testbenches for Spectravel integrated with Caravel
top/rtl/SpectrometerTest - contains user_proj_example.v which is the top level verilog file for Spectravel
Makefile - have targets for verilog and test generation

Useful commands

Before running make commands, we could set the size of FFT inside spectrometer. Default size is 128. For example, we could set the size of the FFT inside spectrometer to be equal to 256 with the command:

$ export SIZE=256

In order to generate verilog file SpectrometerTest.v which contains verilog code for digital spectrometer, run command:

$ make verilog_spectrometer

To run chisel tests for digital spectrometer, run command:

$ make test_spectrometer

In order to run verilog tests for Spectravel connected to Caravel, PDK_ROOT and RISCV32 paths must be set. RISCV32 is path to RV32I Toolchain. For RV32I toolchain installation click here. To check if paths are set, run command:

$ make check-env

In order to test Spectravel added to the Caravel, run command:

$ make test_top

To clean data generated by verilog testbenches, run:

$ make clean_top

Address space for Spectravel

User address space 0x3000_0000
    ├── in_split:   0x3000_0000
    ├── plfg_ram:   0x3000_1000
    ├── plfg:       0x3000_2100
    ├── plfg_split: 0x3000_2200
    ├── plfg_mux_0: 0x3000_2210
    ├── plfg_mux_1: 0x3000_2220
    ├── nco:        0x3000_3000
    ├── nco_split:  0x3000_3100
    ├── nco_mux_0:  0x3000_3110
    ├── nco_mux_1:  0x3000_3120
    ├── fft:        0x3000_4000
    ├── fft_split:  0x3000_4100
    ├── fft_mux_0   0x3000_4110
    ├── fft_mux_1:  0x3000_4120
    ├── mag:        0x3000_5000
    ├── mag_split:  0x3000_5100
    ├── mag_mux_0:  0x3000_5110
    ├── mag_mux_1:  0x3000_5120
    ├── acc_queue:  0x3000_6000
    ├── acc:        0x3000_7000
    ├── out_mux:    0x3000_8000
    ├── out_split:  0x3000_8010
    ├── uart:       0x3000_9000
    └── uart_split: 0x3000_9100