blob: f0f265c9b9af26e6812e344d7cef46d865927c6d [file] [log] [blame]
* Copyright 2020 The SkyWater PDK Authors
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* https://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
* SKY130 Spice File.
* statistics {
* mismatch {
* }
* }
.subckt sky130_fd_pr__cap_vpp_11p5x11p7_l1m1m2m3_shieldm4 c0 c1 b m4
+
.param mult = 1.0
+
+ ctot_a = {118.52e-15*sky130_fd_pr__cap_vpp_11p5x11p7_l1m1m2m3_shieldm4__cor+0.0283/sqrt(11.5*11.7*mult*2)*118.52e-15*sky130_fd_pr__cap_vpp_11p5x11p7_l1m1m2m3_shieldm4__cor*sky130_fd_pr__cap_vpp_11p5x11p7_l1m1m2m3_shieldm4__slope}
+ cm4_c0 = {7.48e-15*c0m4m3_vpp}
+ cm4_c1 = {5.06e-15*c1m4m3_vpp}
+ c0_sub = {(4.99e-15-5.84e-16)*cli2s_vpp}
+ c1_sub = {2.34e-15*cli2s_vpp}
+ rat_m3 = 0.1539
+ rat_m2 = 0.4074
+ rat_m1 = 0.4025
+ rat_li = 0.0362
+ cap_m3 = {rat_m3*ctot_a}
+ cap_m2 = {rat_m2*ctot_a}
+ cap_m1 = {rat_m1*ctot_a}
+ cap_li = {rat_li*ctot_a}
+ ll1 = 5.070
+ lm1 = 5.215
+ lm2 = 5.095
+ lm3 = 5.050
+ wl1 = 0.170
+ wm1 = 0.140
+ wm2 = 0.140
+ wm3 = 0.300
+ nfl1 = 62.0
+ nfm1 = 72.0
+ nfm2 = 72.0
+ nfm3 = 34.0
+ nvia2_c0 = 104.0
+ nvia2_c1 = 49.0
+ nvia_c0 = 124.0
+ nvia_c1 = 62.0
+ ncon_c0 = 116.0
+ ncon_c1 = 28.0
ccmvpp11p5x11p7_m4shield m4 b0 c = {cm4_c0}
cm4_1 m4 b1 c = {cm4_c1}
rsm3 b0 b2 r = {rm3*lm3/wm3*(1/3)*(1/nfm3)}
cm3 b2 b1 c = {cap_m3}
rvia2_0 b0 c0 r = {rcvia2/nvia2_c0}
rvia2_1 b1 c1 r = {rcvia2/nvia2_c1}
rsm2 c0 c2 r = {rm2*lm2/wm2*(1/3)*(1/nfm2)}
cm2 c2 c1 c = {cap_m2}
rvia_0 c0 d0 r = {rcvia/nvia_c0}
rvia_1 c1 d1 r = {rcvia/nvia_c1}
rsm1 d0 d2 r = {rm1*lm1/wm1*(1/3)*(1/nfm1)}
cm1 d2 d1 c = {cap_m1}
rcon1 d0 e0 r = {rcl1/ncon_c0}
rcon2 d1 e1 r = {rcl1/ncon_c1}
rli1 e0 e2 r = {rl1*ll1/wl1*(1/3)*(1/nfl1)}
cli e2 e1 c = {cap_li}
cli2b_0 e0 b c = {c0_sub}
cli2b_1 e1 b c = {c1_sub}
.ends sky130_fd_pr__cap_vpp_11p5x11p7_l1m1m2m3_shieldm4