| striVe 1000 |
| r_0_stress.5 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.5: diffNotSEALID_6um must not overlap deadzone region |
| r_1_stress.5 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.5: Poly not allowed in Dead Zone (except in Anchor) |
| r_2_stress.6 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.6: 8.00 Min width of metals in dead zone |
| r_3_stress.7 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.7: 0.54 min. spacing of met1BusReal & met1Line |
| r_4_stress.7 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.7: 0.54 min. spacing/notch of met1BusReal |
| r_5_stress.7 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.7: 0.54 min. spacing of met2BusReal & met2Line |
| r_6_stress.7 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.7: 0.54 min. spacing/notch of met2BusReal |
| r_7_stress.7 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.7: 0.54 min. spacing of met3BusReal & met3Line |
| r_8_stress.7 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.7: 0.54 min. spacing/notch of met3BusReal |
| r_9_stress.7 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.7: 0.54 min. spacing of met4BusReal & met4Line |
| r_10_stress.7 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.7: 0.54 min. spacing/notch of met4BusReal |
| r_11_stress.7 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.7: 0.54 min. spacing of met5BusReal & met5Line |
| r_12_stress.7 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.7: 0.54 min. spacing/notch of met5BusReal |
| r_13_stress.9 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.9: Max spacing 10 um between stand alone and Non stand alone met1 in Critical Corner/side area |
| r_14_stress.9 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.9: Max spacing 10 um between stand alone and Non stand alone met2 in Critical Corner/side area |
| r_15_stress.9 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.9: Max spacing 10 um between stand alone and Non stand alone met3 in Critical Corner/side area |
| r_16_stress.9 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.9: Max spacing 10 um between stand alone and Non stand alone met4 in Critical Corner/side area |
| r_17_stress.9 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.9: Max spacing 10 um between stand alone and Non stand alone met5 in Critical Corner/side area |
| r_18_stress.10 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.10: No 90 degree bend of inner side of met1 (5 um wide) in Critical Side |
| r_19_stress.11 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.11: No 90 degree bend of inner side of met1 in Critical Corner |
| r_20_stress.10 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.10: No 90 degree bend of inner side of met2 (5 um wide) in Critical Side |
| r_21_stress.11 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.11: No 90 degree bend of inner side of met2 in Critical Corner |
| r_22_stress.10 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.10: No 90 degree bend of inner side of met3 (5 um wide) in Critical Side |
| r_23_stress.11 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.11: No 90 degree bend of inner side of met3 in Critical Corner |
| r_24_stress.10 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.10: No 90 degree bend of inner side of met4 (5 um wide) in Critical Side |
| r_25_stress.11 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.11: No 90 degree bend of inner side of met4 in Critical Corner |
| r_26_stress.10 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.10: No 90 degree bend of inner side of met5 (5 um wide) in Critical Side |
| r_27_stress.11 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.11: No 90 degree bend of inner side of met5 in Critical Corner |
| r_28_stress.12 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.12: 5.00um Minimum Inner 45 degree edge length met1 5.00um wide |
| r_29_stress.13 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.13: 1.00um Minimum Inner 45 degree edge length met1 1.00um to 5.00um wide |
| r_30_stress.14 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.14: 0.17um Minimum Inner 45 degree edge length met1 < 1.00um wide |
| r_31_stress.12 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.12: 5.00um Minimum Inner 45 degree edge length met2 5.00um wide |
| r_32_stress.13 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.13: 1.00um Minimum Inner 45 degree edge length met2 1.00um to 5.00um wide |
| r_33_stress.14 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.14: 0.17um Minimum Inner 45 degree edge length met2 < 1.00um wide |
| r_34_stress.12 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.12: 5.00um Minimum Inner 45 degree edge length met3 5.00um wide |
| r_35_stress.13 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.13: 1.00um Minimum Inner 45 degree edge length met3 1.00um to 5.00um wide |
| r_36_stress.14 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.14: 0.17um Minimum Inner 45 degree edge length met3 < 1.00um wide |
| r_37_stress.12 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.12: 5.00um Minimum Inner 45 degree edge length met4 5.00um wide |
| r_38_stress.13 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.13: 1.00um Minimum Inner 45 degree edge length met4 1.00um to 5.00um wide |
| r_39_stress.14 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.14: 0.17um Minimum Inner 45 degree edge length met4 < 1.00um wide |
| r_40_stress.12 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.12: 5.00um Minimum Inner 45 degree edge length met5 5.00um wide |
| r_41_stress.13 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.13: 1.00um Minimum Inner 45 degree edge length met5 1.00um to 5.00um wide |
| r_42_stress.14 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.14: 0.17um Minimum Inner 45 degree edge length met5 < 1.00um wide |
| r_43_stress.15 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.15: No 90 degree turn allowed for met5 bus connecting pad at the point of connection |
| r_44_stress.15 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.15: No 90 degree turn allowed for met4 bus connecting pad at the point of connection |
| r_45_stress.18 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.18: 2.3 min distance between angled edges (A,B) for 3 consecutive 45 degree edge shapes in crit side/corner |
| r_46_stress.18 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| stress.18: 2.3 min distance between angled edges (A,B) for 3 consecutive 45 degree edge shapes in crit side/corner |
| r_47_slot.13 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.13: 2.30 Min width of met1 slot |
| r_48_slot.14_w |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.14_w: 10.00 Max width of met1 slot |
| r_49_slot.14_l |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.14_l: 600.00 Max length of met1 slot |
| r_50_slot.13 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.13: 2.30 Min width of met2 slot |
| r_51_slot.14_w |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.14_w: 10.00 Max width of met2 slot |
| r_52_slot.14_l |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.14_l: 600.00 Max length of met2 slot |
| r_53_slot.13 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.13: 2.30 Min width of met3 slot |
| r_54_slot.14_w |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.14_w: 10.00 Max width of met3 slot |
| r_55_slot.14_l |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.14_l: 600.00 Max length of met3 slot |
| r_56_slot.13 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.13: 2.30 Min width of met4 slot |
| r_57_slot.14_w |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.14_w: 10.00 Max width of met4 slot |
| r_58_slot.14_l |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.14_l: 600.00 Max length of met4 slot |
| r_59_slot.13 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.13: 2.30 Min width of met5 slot |
| r_60_slot.14_w |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.14_w: 10.00 Max width of met5 slot |
| r_61_slot.14_l |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.14_l: 600.00 Max length of met5 slot |
| r_62_slot.11 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.11: met1Low_slot_stack should enclose met2Upp_slot_stack in metal stack |
| r_63_slot.12 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.12: 1 min. enclosure of met2Upp_slot_stack by met1Low_slot_stack |
| r_64_slot.6/slot.8 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.6/slot.8: 1.00 Min enclosure met1stackBus by met1UppBus in 5 um wide metal stack |
| r_65_slot.4 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.4: Minimum via density on wide met1 and met2 bus stack is 3.00 percent |
| r_66_slot.11 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.11: met2Low_slot_stack should enclose met3Upp_slot_stack in metal stack |
| r_67_slot.12 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.12: 1 min. enclosure of met3Upp_slot_stack by met2Low_slot_stack |
| r_68_slot.6/slot.8 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.6/slot.8: 1.00 Min enclosure met2stackBus by met2UppBus in 5 um wide metal stack |
| r_69_slot.4 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.4: Minimum via2 density on wide met2 and met3 bus stack is 3.00 percent |
| r_70_slot.11 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.11: met3Low_slot_stack should enclose met4Upp_slot_stack in metal stack |
| r_71_slot.12 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.12: 1 min. enclosure of met4Upp_slot_stack by met3Low_slot_stack |
| r_72_slot.6/slot.8 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.6/slot.8: 1.00 Min enclosure met3stackBus by met3UppBus in 5 um wide metal stack |
| r_73_slot.4 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.4: Minimum via3 density on wide met3 and met4 bus stack is 3.00 percent |
| r_74_slot.11 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.11: met4Low_slot_stack should enclose met5Upp_slot_stack in metal stack |
| r_75_slot.12 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.12: 1 min. enclosure of met5Upp_slot_stack by met4Low_slot_stack |
| r_76_slot.6/slot.8 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.6/slot.8: 1.00 Min enclosure met4stackBus by met4UppBus in 5 um wide metal stack |
| r_77_slot.4 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.4: Minimum via4 density on wide met4 and met5 bus stack is 3.00 percent |
| r_78_slot.15 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.15: Minimum slot density on wide met1 bus is 7.50 percent |
| r_79_slot.15 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.15: Minimum slot density on wide met2 bus is 7.50 percent |
| r_80_slot.15 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.15: Minimum slot density on wide met3 bus is 7.50 percent |
| r_81_slot.15 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.15: Minimum slot density on wide met4 bus is 7.50 percent |
| r_82_slot.15 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.15: Minimum slot density on wide met5 bus is 7.50 percent |
| r_83_slot.9/16 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.9/16: met1 wider than 25um in critical Area should contain slot |
| r_84_slot.17 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.17: 2.3 min. spacing of met1slot |
| r_85_slot.9/16 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.9/16: met2 wider than 25um in critical Area should contain slot |
| r_86_slot.17 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.17: 2.3 min. spacing of met2slot |
| r_87_slot.9/16 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.9/16: met3 wider than 25um in critical Area should contain slot |
| r_88_slot.17 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.17: 2.3 min. spacing of met3slot |
| r_89_slot.9/16 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.9/16: met4 wider than 25um in critical Area should contain slot |
| r_90_slot.17 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.17: 2.3 min. spacing of met4slot |
| r_91_slot.9/16 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.9/16: met5 wider than 25um in critical Area should contain slot |
| r_92_slot.17 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.17: 2.3 min. spacing of met5slot |
| r_93_slot.18 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.18: met1 slots spaced less than 25.00um in adjacent rows should not be aligned |
| r_94_slot.18 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.18: met2 slots spaced less than 25.00um in adjacent rows should not be aligned |
| r_95_slot.18 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.18: met3 slots spaced less than 25.00um in adjacent rows should not be aligned |
| r_96_slot.18 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.18: met4 slots spaced less than 25.00um in adjacent rows should not be aligned |
| r_97_slot.18 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| slot.18: met5 slots spaced less than 25.00um in adjacent rows should not be aligned |
| r_98_anchor.1 |
| 46 46 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.1: Open area anchors needed in any open window of 50umx50um in Crital side Area |
| p 1 4 |
| CN striVe c 1 0 0 1 0 0 0 |
| 47600 206000 |
| 97600 206000 |
| 97600 247600 |
| 47600 247600 |
| p 2 4 |
| 47600 347600 |
| 97600 347600 |
| 97600 397600 |
| 47600 397600 |
| p 3 4 |
| 47600 1147600 |
| 97600 1147600 |
| 97600 1197600 |
| 47600 1197600 |
| p 4 4 |
| 47600 1422600 |
| 97600 1422600 |
| 97600 1472600 |
| 47600 1472600 |
| p 5 4 |
| 47600 1697600 |
| 97600 1697600 |
| 97600 1747600 |
| 47600 1747600 |
| p 6 4 |
| 47600 1972600 |
| 97600 1972600 |
| 97600 2022600 |
| 47600 2022600 |
| p 7 4 |
| 47600 2522600 |
| 97600 2522600 |
| 97600 2556000 |
| 47600 2556000 |
| p 8 4 |
| 47600 2556000 |
| 97600 2556000 |
| 97600 2672600 |
| 47600 2672600 |
| p 9 8 |
| 47600 72600 |
| 72600 72600 |
| 72600 47600 |
| 206000 47600 |
| 206000 97600 |
| 97600 97600 |
| 97600 206000 |
| 47600 206000 |
| p 10 4 |
| 97600 2672600 |
| 206000 2672600 |
| 206000 2722600 |
| 97600 2722600 |
| p 11 4 |
| 206000 47600 |
| 272600 47600 |
| 272600 97600 |
| 206000 97600 |
| p 12 4 |
| 206000 2672600 |
| 247600 2672600 |
| 247600 2722600 |
| 206000 2722600 |
| p 13 4 |
| 372600 47600 |
| 422600 47600 |
| 422600 97600 |
| 372600 97600 |
| p 14 4 |
| 472600 2672600 |
| 522600 2672600 |
| 522600 2722600 |
| 472600 2722600 |
| p 15 4 |
| 522600 47600 |
| 597600 47600 |
| 597600 97600 |
| 522600 97600 |
| p 16 4 |
| 697600 47600 |
| 747600 47600 |
| 747600 97600 |
| 697600 97600 |
| p 17 4 |
| 847600 47600 |
| 897600 47600 |
| 897600 97600 |
| 847600 97600 |
| p 18 4 |
| 997600 47600 |
| 1072600 47600 |
| 1072600 97600 |
| 997600 97600 |
| p 19 4 |
| 1172600 47600 |
| 1222600 47600 |
| 1222600 97600 |
| 1172600 97600 |
| p 20 4 |
| 1272600 2672600 |
| 1322600 2672600 |
| 1322600 2722600 |
| 1272600 2722600 |
| p 21 4 |
| 1322600 47600 |
| 1397600 47600 |
| 1397600 97600 |
| 1322600 97600 |
| p 22 4 |
| 1497600 47600 |
| 1547600 47600 |
| 1547600 97600 |
| 1497600 97600 |
| p 23 4 |
| 1647600 47600 |
| 1722600 47600 |
| 1722600 97600 |
| 1647600 97600 |
| p 24 4 |
| 1822600 47600 |
| 1872600 47600 |
| 1872600 97600 |
| 1822600 97600 |
| p 25 4 |
| 1972600 47600 |
| 2047600 47600 |
| 2047600 97600 |
| 1972600 97600 |
| p 26 4 |
| 2147600 47600 |
| 2197600 47600 |
| 2197600 97600 |
| 2147600 97600 |
| p 27 4 |
| 2222600 2672600 |
| 2272600 2672600 |
| 2272600 2722600 |
| 2222600 2722600 |
| p 28 4 |
| 2322600 47600 |
| 2372600 47600 |
| 2372600 97600 |
| 2322600 97600 |
| p 29 4 |
| 2472600 47600 |
| 2672600 47600 |
| 2672600 97600 |
| 2472600 97600 |
| p 30 4 |
| 2497600 2672600 |
| 2672600 2672600 |
| 2672600 2722600 |
| 2497600 2722600 |
| p 31 4 |
| 2672600 97600 |
| 2722600 97600 |
| 2722600 206000 |
| 2672600 206000 |
| p 32 4 |
| 2672600 206000 |
| 2722600 206000 |
| 2722600 322600 |
| 2672600 322600 |
| p 33 4 |
| 2672600 422600 |
| 2722600 422600 |
| 2722600 522600 |
| 2672600 522600 |
| p 34 4 |
| 2672600 622600 |
| 2722600 622600 |
| 2722600 722600 |
| 2672600 722600 |
| p 35 4 |
| 2672600 822600 |
| 2722600 822600 |
| 2722600 922600 |
| 2672600 922600 |
| p 36 4 |
| 2672600 1022600 |
| 2722600 1022600 |
| 2722600 1122600 |
| 2672600 1122600 |
| p 37 4 |
| 2672600 1222600 |
| 2722600 1222600 |
| 2722600 1322600 |
| 2672600 1322600 |
| p 38 4 |
| 2672600 1422600 |
| 2722600 1422600 |
| 2722600 1522600 |
| 2672600 1522600 |
| p 39 4 |
| 2672600 1622600 |
| 2722600 1622600 |
| 2722600 1716000 |
| 2672600 1716000 |
| p 40 4 |
| 2672600 1716000 |
| 2722600 1716000 |
| 2722600 1722600 |
| 2672600 1722600 |
| p 41 4 |
| 2672600 1822600 |
| 2722600 1822600 |
| 2722600 1908400 |
| 2672600 1908400 |
| p 42 4 |
| 2672600 1908400 |
| 2722600 1908400 |
| 2722600 1922600 |
| 2672600 1922600 |
| p 43 4 |
| 2672600 2022600 |
| 2722600 2022600 |
| 2722600 2122600 |
| 2672600 2122600 |
| p 44 4 |
| 2672600 2247600 |
| 2722600 2247600 |
| 2722600 2322600 |
| 2672600 2322600 |
| p 45 4 |
| 2672600 2447600 |
| 2722600 2447600 |
| 2722600 2556000 |
| 2672600 2556000 |
| p 46 4 |
| 2672600 2556000 |
| 2722600 2556000 |
| 2722600 2672600 |
| 2672600 2672600 |
| r_99_anchor.4 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.4: 3 min. width of anchorLi1 |
| r_100_anchor.4 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.4: 3 min. width of q0met1 |
| r_101_anchor.4 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.4: 3 min. width of q1met2 |
| r_102_anchor.4 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.4: 3 min. width of q1met3 |
| r_103_anchor.4 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.4: 3 min. width of q1met4 |
| r_104_anchor.4 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.4: 3 min. width of q1met5 |
| r_105_anchor.5 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.5: 5 min. spacing/notch of anchor |
| r_106_anchor.6 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.6: via_anc must not overlap via2_anc |
| r_107_anchor.6 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.6: via_anc must not overlap via3_anc |
| r_108_anchor.6 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.6: via_anc must not overlap via4_anc |
| r_109_anchor.6 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.6: via_anc must not overlap mcon_anc |
| r_110_anchor.6 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.6: via2_anc must not overlap via3_anc |
| r_111_anchor.6 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.6: via2_anc must not overlap via4_anc |
| r_112_anchor.6 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.6: via2_anc must not overlap mcon_anc |
| r_113_anchor.6 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.6: via3_anc must not overlap via4_anc |
| r_114_anchor.6 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.6: via3_anc must not overlap mcon_anc |
| r_115_anchor.6 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.6: via4_anc must not overlap mcon_anc |
| r_116_anchor.6 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.6: 2.95 min. spacing/notch of via_anc |
| r_117_anchor.6 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.6: 2.9 min. spacing/notch of via2_anc |
| r_118_anchor.6 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.6: 2.9 min. spacing/notch of via3_anc |
| r_119_anchor.6 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.6: 2.3 min. spacing/notch of via4_anc |
| r_120_anchor.6 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.6: 2.93 min. spacing/notch of mcon_anc |
| r_121_anchor.3 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.3: met1 of ANCHOR cannot connect to any other metal bus |
| r_122_anchor.3 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.3: met2 of ANCHOR cannot connect to any other metal bus |
| r_123_anchor.3 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.3: met3 of ANCHOR cannot connect to any other metal bus |
| r_124_anchor.3 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.3: met4 of ANCHOR cannot connect to any other metal bus |
| r_125_anchor.3 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_ |
| anchor.3: met5 of ANCHOR cannot connect to any other metal bus |
| DENSITY_RDBS |
| 0 0 1 ... XX XX:XX:XX 2... |
| anchor.1_density.db 2447 |
| NET_AREA_RATIO_RDBS |
| 0 0 9 ... XX XX:XX:XX 2... |
| slot.4.met1.db 0 |
| slot.4.met2.db 0 |
| slot.4.met3.db 0 |
| slot.4.met4.db 0 |
| slot.15.met1.db 0 |
| slot.15.met2.db 0 |
| slot.15.met3.db 0 |
| slot.15.met4.db 0 |
| slot.15.met5.db 0 |
| DRC_RDBS |
| 0 0 1 ... XX XX:XX:XX 2... |
| keepLayer.db 3894 |
