striVe 1000
r_0_stress.5
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.5: diffNotSEALID_6um must not overlap deadzone region
r_1_stress.5
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.5: Poly not allowed in Dead Zone (except in Anchor)
r_2_stress.6
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.6: 8.00 Min width of metals in dead zone
r_3_stress.7
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.7: 0.54 min. spacing of met1BusReal & met1Line
r_4_stress.7
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.7: 0.54 min. spacing/notch of met1BusReal
r_5_stress.7
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.7: 0.54 min. spacing of met2BusReal & met2Line
r_6_stress.7
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.7: 0.54 min. spacing/notch of met2BusReal
r_7_stress.7
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.7: 0.54 min. spacing of met3BusReal & met3Line
r_8_stress.7
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.7: 0.54 min. spacing/notch of met3BusReal
r_9_stress.7
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.7: 0.54 min. spacing of met4BusReal & met4Line
r_10_stress.7
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.7: 0.54 min. spacing/notch of met4BusReal
r_11_stress.7
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.7: 0.54 min. spacing of met5BusReal & met5Line
r_12_stress.7
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.7: 0.54 min. spacing/notch of met5BusReal
r_13_stress.9
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.9: Max spacing 10 um between stand alone and Non stand alone met1 in Critical Corner/side area
r_14_stress.9
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.9: Max spacing 10 um between stand alone and Non stand alone met2 in Critical Corner/side area
r_15_stress.9
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.9: Max spacing 10 um between stand alone and Non stand alone met3 in Critical Corner/side area
r_16_stress.9
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.9: Max spacing 10 um between stand alone and Non stand alone met4 in Critical Corner/side area
r_17_stress.9
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.9: Max spacing 10 um between stand alone and Non stand alone met5 in Critical Corner/side area
r_18_stress.10
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.10: No 90 degree bend of inner side of met1 (5 um wide) in Critical Side
r_19_stress.11
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.11: No 90 degree bend of inner side of met1 in Critical Corner
r_20_stress.10
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.10: No 90 degree bend of inner side of met2 (5 um wide) in Critical Side
r_21_stress.11
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.11: No 90 degree bend of inner side of met2 in Critical Corner
r_22_stress.10
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.10: No 90 degree bend of inner side of met3 (5 um wide) in Critical Side
r_23_stress.11
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.11: No 90 degree bend of inner side of met3 in Critical Corner
r_24_stress.10
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.10: No 90 degree bend of inner side of met4 (5 um wide) in Critical Side
r_25_stress.11
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.11: No 90 degree bend of inner side of met4 in Critical Corner
r_26_stress.10
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.10: No 90 degree bend of inner side of met5 (5 um wide) in Critical Side
r_27_stress.11
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.11: No 90 degree bend of inner side of met5 in Critical Corner
r_28_stress.12
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.12: 5.00um Minimum Inner 45 degree edge length met1 5.00um wide
r_29_stress.13
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.13: 1.00um Minimum Inner 45 degree edge length met1 1.00um to 5.00um wide
r_30_stress.14
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.14: 0.17um Minimum Inner 45 degree edge length met1 < 1.00um wide 
r_31_stress.12
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.12: 5.00um Minimum Inner 45 degree edge length met2 5.00um wide
r_32_stress.13
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.13: 1.00um Minimum Inner 45 degree edge length met2 1.00um to 5.00um wide
r_33_stress.14
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.14: 0.17um Minimum Inner 45 degree edge length met2 < 1.00um wide 
r_34_stress.12
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.12: 5.00um Minimum Inner 45 degree edge length met3 5.00um wide
r_35_stress.13
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.13: 1.00um Minimum Inner 45 degree edge length met3 1.00um to 5.00um wide
r_36_stress.14
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.14: 0.17um Minimum Inner 45 degree edge length met3 < 1.00um wide 
r_37_stress.12
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.12: 5.00um Minimum Inner 45 degree edge length met4 5.00um wide
r_38_stress.13
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.13: 1.00um Minimum Inner 45 degree edge length met4 1.00um to 5.00um wide
r_39_stress.14
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.14: 0.17um Minimum Inner 45 degree edge length met4 < 1.00um wide 
r_40_stress.12
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.12: 5.00um Minimum Inner 45 degree edge length met5 5.00um wide
r_41_stress.13
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.13: 1.00um Minimum Inner 45 degree edge length met5 1.00um to 5.00um wide
r_42_stress.14
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.14: 0.17um Minimum Inner 45 degree edge length met5 < 1.00um wide 
r_43_stress.15
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.15: No 90 degree turn allowed for met5 bus connecting pad at the point of connection
r_44_stress.15
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.15: No 90 degree turn allowed for met4 bus connecting pad at the point of connection
r_45_stress.18
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.18: 2.3 min distance between angled edges (A,B) for 3 consecutive 45 degree edge shapes in crit side/corner
r_46_stress.18
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
stress.18: 2.3 min distance between angled edges (A,B) for 3 consecutive 45 degree edge shapes in crit side/corner
r_47_slot.13
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.13: 2.30 Min width  of met1 slot 
r_48_slot.14_w
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.14_w: 10.00 Max width  of met1 slot 
r_49_slot.14_l
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.14_l: 600.00 Max length of met1 slot 
r_50_slot.13
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.13: 2.30 Min width  of met2 slot 
r_51_slot.14_w
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.14_w: 10.00 Max width  of met2 slot 
r_52_slot.14_l
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.14_l: 600.00 Max length of met2 slot 
r_53_slot.13
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.13: 2.30 Min width  of met3 slot 
r_54_slot.14_w
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.14_w: 10.00 Max width  of met3 slot 
r_55_slot.14_l
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.14_l: 600.00 Max length of met3 slot 
r_56_slot.13
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.13: 2.30 Min width  of met4 slot 
r_57_slot.14_w
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.14_w: 10.00 Max width  of met4 slot 
r_58_slot.14_l
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.14_l: 600.00 Max length of met4 slot 
r_59_slot.13
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.13: 2.30 Min width  of met5 slot 
r_60_slot.14_w
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.14_w: 10.00 Max width  of met5 slot 
r_61_slot.14_l
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.14_l: 600.00 Max length of met5 slot 
r_62_slot.11
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.11: met1Low_slot_stack should enclose met2Upp_slot_stack in metal stack
r_63_slot.12
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.12: 1 min. enclosure of met2Upp_slot_stack by met1Low_slot_stack
r_64_slot.6/slot.8
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.6/slot.8: 1.00 Min enclosure met1stackBus by met1UppBus in 5 um wide metal stack
r_65_slot.4
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.4: Minimum via density on wide met1 and met2 bus stack is 3.00 percent
r_66_slot.11
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.11: met2Low_slot_stack should enclose met3Upp_slot_stack in metal stack
r_67_slot.12
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.12: 1 min. enclosure of met3Upp_slot_stack by met2Low_slot_stack
r_68_slot.6/slot.8
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.6/slot.8: 1.00 Min enclosure met2stackBus by met2UppBus in 5 um wide metal stack
r_69_slot.4
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.4: Minimum via2 density on wide met2 and met3 bus stack is 3.00 percent
r_70_slot.11
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.11: met3Low_slot_stack should enclose met4Upp_slot_stack in metal stack
r_71_slot.12
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.12: 1 min. enclosure of met4Upp_slot_stack by met3Low_slot_stack
r_72_slot.6/slot.8
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.6/slot.8: 1.00 Min enclosure met3stackBus by met3UppBus in 5 um wide metal stack
r_73_slot.4
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.4: Minimum via3 density on wide met3 and met4 bus stack is 3.00 percent
r_74_slot.11
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.11: met4Low_slot_stack should enclose met5Upp_slot_stack in metal stack
r_75_slot.12
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.12: 1 min. enclosure of met5Upp_slot_stack by met4Low_slot_stack
r_76_slot.6/slot.8
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.6/slot.8: 1.00 Min enclosure met4stackBus by met4UppBus in 5 um wide metal stack
r_77_slot.4
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.4: Minimum via4 density on wide met4 and met5 bus stack is 3.00 percent
r_78_slot.15
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.15: Minimum slot density on wide met1 bus is 7.50 percent
r_79_slot.15
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.15: Minimum slot density on wide met2 bus is 7.50 percent
r_80_slot.15
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.15: Minimum slot density on wide met3 bus is 7.50 percent
r_81_slot.15
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.15: Minimum slot density on wide met4 bus is 7.50 percent
r_82_slot.15
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.15: Minimum slot density on wide met5 bus is 7.50 percent
r_83_slot.9/16
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.9/16: met1 wider than 25um in critical Area should contain slot
r_84_slot.17
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.17: 2.3 min. spacing of met1slot
r_85_slot.9/16
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.9/16: met2 wider than 25um in critical Area should contain slot
r_86_slot.17
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.17: 2.3 min. spacing of met2slot
r_87_slot.9/16
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.9/16: met3 wider than 25um in critical Area should contain slot
r_88_slot.17
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.17: 2.3 min. spacing of met3slot
r_89_slot.9/16
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.9/16: met4 wider than 25um in critical Area should contain slot
r_90_slot.17
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.17: 2.3 min. spacing of met4slot
r_91_slot.9/16
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.9/16: met5 wider than 25um in critical Area should contain slot
r_92_slot.17
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.17: 2.3 min. spacing of met5slot
r_93_slot.18
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.18: met1 slots spaced less than 25.00um in adjacent rows should not be aligned
r_94_slot.18
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.18: met2 slots spaced less than 25.00um in adjacent rows should not be aligned
r_95_slot.18
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.18: met3 slots spaced less than 25.00um in adjacent rows should not be aligned
r_96_slot.18
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.18: met4 slots spaced less than 25.00um in adjacent rows should not be aligned
r_97_slot.18
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
slot.18: met5 slots spaced less than 25.00um in adjacent rows should not be aligned
r_98_anchor.1
46 46 2 ... XX XX:XX:XX 2...                   
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.1: Open area anchors needed in any open window of 50umx50um in Crital side Area
p 1 4
CN striVe c 1 0 0 1 0 0 0
47600 206000
97600 206000
97600 247600
47600 247600
p 2 4
47600 347600
97600 347600
97600 397600
47600 397600
p 3 4
47600 1147600
97600 1147600
97600 1197600
47600 1197600
p 4 4
47600 1422600
97600 1422600
97600 1472600
47600 1472600
p 5 4
47600 1697600
97600 1697600
97600 1747600
47600 1747600
p 6 4
47600 1972600
97600 1972600
97600 2022600
47600 2022600
p 7 4
47600 2522600
97600 2522600
97600 2556000
47600 2556000
p 8 4
47600 2556000
97600 2556000
97600 2672600
47600 2672600
p 9 8
47600 72600
72600 72600
72600 47600
206000 47600
206000 97600
97600 97600
97600 206000
47600 206000
p 10 4
97600 2672600
206000 2672600
206000 2722600
97600 2722600
p 11 4
206000 47600
272600 47600
272600 97600
206000 97600
p 12 4
206000 2672600
247600 2672600
247600 2722600
206000 2722600
p 13 4
372600 47600
422600 47600
422600 97600
372600 97600
p 14 4
472600 2672600
522600 2672600
522600 2722600
472600 2722600
p 15 4
522600 47600
597600 47600
597600 97600
522600 97600
p 16 4
697600 47600
747600 47600
747600 97600
697600 97600
p 17 4
847600 47600
897600 47600
897600 97600
847600 97600
p 18 4
997600 47600
1072600 47600
1072600 97600
997600 97600
p 19 4
1172600 47600
1222600 47600
1222600 97600
1172600 97600
p 20 4
1272600 2672600
1322600 2672600
1322600 2722600
1272600 2722600
p 21 4
1322600 47600
1397600 47600
1397600 97600
1322600 97600
p 22 4
1497600 47600
1547600 47600
1547600 97600
1497600 97600
p 23 4
1647600 47600
1722600 47600
1722600 97600
1647600 97600
p 24 4
1822600 47600
1872600 47600
1872600 97600
1822600 97600
p 25 4
1972600 47600
2047600 47600
2047600 97600
1972600 97600
p 26 4
2147600 47600
2197600 47600
2197600 97600
2147600 97600
p 27 4
2222600 2672600
2272600 2672600
2272600 2722600
2222600 2722600
p 28 4
2322600 47600
2372600 47600
2372600 97600
2322600 97600
p 29 4
2472600 47600
2672600 47600
2672600 97600
2472600 97600
p 30 4
2497600 2672600
2672600 2672600
2672600 2722600
2497600 2722600
p 31 4
2672600 97600
2722600 97600
2722600 206000
2672600 206000
p 32 4
2672600 206000
2722600 206000
2722600 322600
2672600 322600
p 33 4
2672600 422600
2722600 422600
2722600 522600
2672600 522600
p 34 4
2672600 622600
2722600 622600
2722600 722600
2672600 722600
p 35 4
2672600 822600
2722600 822600
2722600 922600
2672600 922600
p 36 4
2672600 1022600
2722600 1022600
2722600 1122600
2672600 1122600
p 37 4
2672600 1222600
2722600 1222600
2722600 1322600
2672600 1322600
p 38 4
2672600 1422600
2722600 1422600
2722600 1522600
2672600 1522600
p 39 4
2672600 1622600
2722600 1622600
2722600 1716000
2672600 1716000
p 40 4
2672600 1716000
2722600 1716000
2722600 1722600
2672600 1722600
p 41 4
2672600 1822600
2722600 1822600
2722600 1908400
2672600 1908400
p 42 4
2672600 1908400
2722600 1908400
2722600 1922600
2672600 1922600
p 43 4
2672600 2022600
2722600 2022600
2722600 2122600
2672600 2122600
p 44 4
2672600 2247600
2722600 2247600
2722600 2322600
2672600 2322600
p 45 4
2672600 2447600
2722600 2447600
2722600 2556000
2672600 2556000
p 46 4
2672600 2556000
2722600 2556000
2722600 2672600
2672600 2672600
r_99_anchor.4
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.4: 3 min. width of anchorLi1
r_100_anchor.4
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.4: 3 min. width of q0met1
r_101_anchor.4
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.4: 3 min. width of q1met2
r_102_anchor.4
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.4: 3 min. width of q1met3
r_103_anchor.4
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.4: 3 min. width of q1met4
r_104_anchor.4
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.4: 3 min. width of q1met5
r_105_anchor.5
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.5: 5 min. spacing/notch of anchor
r_106_anchor.6
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.6: via_anc must not overlap via2_anc
r_107_anchor.6
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.6: via_anc must not overlap via3_anc
r_108_anchor.6
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.6: via_anc must not overlap via4_anc
r_109_anchor.6
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.6: via_anc must not overlap mcon_anc
r_110_anchor.6
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.6: via2_anc must not overlap via3_anc
r_111_anchor.6
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.6: via2_anc must not overlap via4_anc
r_112_anchor.6
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.6: via2_anc must not overlap mcon_anc
r_113_anchor.6
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.6: via3_anc must not overlap via4_anc
r_114_anchor.6
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.6: via3_anc must not overlap mcon_anc
r_115_anchor.6
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.6: via4_anc must not overlap mcon_anc
r_116_anchor.6
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.6: 2.95 min. spacing/notch of via_anc
r_117_anchor.6
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.6: 2.9 min. spacing/notch of via2_anc
r_118_anchor.6
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.6: 2.9 min. spacing/notch of via3_anc
r_119_anchor.6
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.6: 2.3 min. spacing/notch of via4_anc
r_120_anchor.6
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.6: 2.93 min. spacing/notch of mcon_anc
r_121_anchor.3
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.3: met1 of ANCHOR cannot connect to any other metal bus
r_122_anchor.3
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.3: met2 of ANCHOR cannot connect to any other metal bus
r_123_anchor.3
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.3: met3 of ANCHOR cannot connect to any other metal bus
r_124_anchor.3
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.3: met4 of ANCHOR cannot connect to any other metal bus
r_125_anchor.3
0 0 2 ... XX XX:XX:XX 2...                     
Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/stress/_s8_stressRules_
anchor.3: met5 of ANCHOR cannot connect to any other metal bus
DENSITY_RDBS
0 0 1 ... XX XX:XX:XX 2...
anchor.1_density.db 2447
NET_AREA_RATIO_RDBS
0 0 9 ... XX XX:XX:XX 2...
slot.4.met1.db 0
slot.4.met2.db 0
slot.4.met3.db 0
slot.4.met4.db 0
slot.15.met1.db 0
slot.15.met2.db 0
slot.15.met3.db 0
slot.15.met4.db 0
slot.15.met5.db 0
DRC_RDBS
0 0 1 ... XX XX:XX:XX 2...
keepLayer.db 3894