note on names and fix description
diff --git a/INFO.md b/INFO.md
index b8a6bed..dff0ea2 100644
--- a/INFO.md
+++ b/INFO.md
@@ -16,14 +16,16 @@
You can also run one of the simple tests and check the waveforms. See how in the [scan chain verification](verification.md) doc.
Assuming you want to update project at position 2 (0 indexed) with lowest 3 inputs high and fetch the output.
-Signal names are from the perspective of the scan chain driver.
+
+* Signal names are from the perspective of the scan chain driver.
+* The desired project shall be called DUT (design under test)
* Set scan_select low so that the data is clocked into the scan flops (rather than from the design)
-* Toggle scan_clk_out 16 times to skip project 0 & 1
* For the next 8 clocks, set scan_data_out to 0, 0, 0, 0, 0, 0, 1, 1
-* Toggle scan_latch_en to deliver the data from the scan chain to the project
-* Set scan_select high to set the scan flop's input to be from the project
-* Toggle the scan_clk_out to capture the project data into the scan chain
+* Toggle scan_clk_out 16 times to deliver the data to the DUT
+* Toggle scan_latch_en to deliver the data from the scan chain to the DUT
+* Set scan_select high to set the scan flop's input to be from the DUT
+* Toggle the scan_clk_out to capture the DUT's data into the scan chain
* Toggle the scan_clk_out another 8 x number of remaining designs to receive the data at scan_data_in
