riscv 4 core integration and test bench clean-up
diff --git a/verilog/dv/agents/uart_agent.v b/verilog/dv/agents/uart_agent.v
index 72121e9..9d647c8 100644
--- a/verilog/dv/agents/uart_agent.v
+++ b/verilog/dv/agents/uart_agent.v
@@ -14,6 +14,10 @@
// limitations under the License.
// SPDX-License-Identifier: Apache-2.0
// SPDX-FileContributor: Modified by Dinesh Annayya <dinesha@opencores.org>
+//
+
+`timescale 1ns/1ps
+
module uart_agent (
mclk,
txd,
diff --git a/verilog/dv/model/is62wvs1288.v b/verilog/dv/model/is62wvs1288.v
index c938977..37bf718 100644
--- a/verilog/dv/model/is62wvs1288.v
+++ b/verilog/dv/model/is62wvs1288.v
@@ -43,7 +43,8 @@
//
module is62wvs1288 #(
- parameter mem_file_name = "firmware.hex"
+ //parameter mem_file_name = "firmware.hex"
+ parameter mem_file_name = "none"
)(
input csb,
input clk,
diff --git a/verilog/dv/risc_boot/Makefile b/verilog/dv/risc_boot/Makefile
index 8df6ef7..4422d7d 100644
--- a/verilog/dv/risc_boot/Makefile
+++ b/verilog/dv/risc_boot/Makefile
@@ -21,6 +21,7 @@
# ---- Include Partitioned Makefiles ----
+DESIGNS?=../../..
CONFIG = caravel_user_project
########################################################
@@ -51,7 +52,7 @@
export TOOLS ?= /opt/riscv64i
export GCC_PATH ?= $(TOOLS)/bin
-export GCC_PREFIX?= riscv32-unknown-linux-gnu
+export GCC_PREFIX?= riscv64-unknown-linux-gnu
############## USER SPECIFIC DEFINE ##################
@@ -126,7 +127,7 @@
# Comiple firmeware
##############################################################################
%.elf: %.c $(LINKER_SCRIPT) $(SOURCE_FILES)
- ${GCC_PATH}/${GCC_PREFIX}-gcc -g \
+ ${GCC_PREFIX}-gcc -g \
-I$(FIRMWARE_PATH) \
-I$(VERILOG_PATH)/dv/generated \
-I$(VERILOG_PATH)/dv/ \
@@ -136,15 +137,15 @@
-ffreestanding -nostdlib -o $@ $(SOURCE_FILES) $<
%.lst: %.elf
- ${GCC_PATH}/${GCC_PREFIX}-objdump -d -S $< > $@
+ ${GCC_PREFIX}-objdump -d -S $< > $@
%.hex: %.elf
- ${GCC_PATH}/${GCC_PREFIX}-objcopy -O verilog $< $@
+ ${GCC_PREFIX}-objcopy -O verilog $< $@
# to fix flash base address
sed -ie 's/@10/@00/g' $@
%.bin: %.elf
- ${GCC_PATH}/${GCC_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
+ ${GCC_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
##############################################################################
@@ -152,11 +153,11 @@
##############################################################################
%.vvp: %_tb.v %.hex
- ${GCC_PATH}/${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\" -c -I./ -I$(YIFIVE_FIRMWARE_PATH) user_uart.c -o user_uart.o
- ${GCC_PATH}/${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\" -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH) $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
- ${GCC_PATH}/${GCC_PREFIX}-gcc -march=rv32imc -mabi=ilp32 -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_uart.o crt.o -nostartfiles -nostdlib -lc -lgcc -o user_uart.elf -N
- ${GCC_PATH}/${GCC_PREFIX}-objcopy -O verilog user_uart.elf user_uart.hex
- ${GCC_PATH}/${GCC_PREFIX}-objdump -D user_uart.elf > user_uart.dump
+ ${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\" -c -I./ -I$(YIFIVE_FIRMWARE_PATH) user_uart.c -o user_uart.o
+ ${GCC_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=0 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\" -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH) $(YIFIVE_FIRMWARE_PATH)/crt.S -o crt.o
+ ${GCC_PREFIX}-gcc -march=rv32imc -mabi=ilp32 -T $(YIFIVE_FIRMWARE_PATH)/link.ld user_uart.o crt.o -nostartfiles -nostdlib -lc -lgcc -o user_uart.elf -N
+ ${GCC_PREFIX}-objcopy -O verilog user_uart.elf user_uart.hex
+ ${GCC_PREFIX}-objdump -D user_uart.elf > user_uart.dump
rm crt.o user_uart.o
## RTL
@@ -215,8 +216,8 @@
ifeq (,$(wildcard $(PDK_ROOT)/sky130A))
$(error $(PDK_ROOT)/sky130A not found, please install pdk before running make)
endif
-ifeq (,$(wildcard $(GCC_PATH)/$(GCC_PREFIX)-gcc ))
- $(error $(GCC_PATH)/$(GCC_PREFIX)-gcc is not found, please export GCC_PATH and GCC_PREFIX before running make)
+ifeq (,$(wildcard $(GCC_PREFIX)-gcc ))
+ $(error $(GCC_PREFIX)-gcc is not found, please export GCC_PATH and GCC_PREFIX before running make)
endif
# check for efabless style installation
ifeq (,$(wildcard $(PDK_ROOT)/sky130A/libs.ref/*/verilog))
diff --git a/verilog/dv/risc_boot/risc_boot.c b/verilog/dv/risc_boot/risc_boot.c
index bc41e1b..7de5444 100644
--- a/verilog/dv/risc_boot/risc_boot.c
+++ b/verilog/dv/risc_boot/risc_boot.c
@@ -98,7 +98,7 @@
reg_mprj_xfer = 1;
while (reg_mprj_xfer == 1);
- reg_la2_oenb = reg_la2_iena = 0xFFFFFFFF; // [95:64]
+ reg_la0_oenb = reg_la0_iena = 0xFFFFFFFF; // [31:0]
// Flag start of the test
reg_mprj_datal = 0xAB600000;
diff --git a/verilog/dv/riscv_regress/Makefile b/verilog/dv/riscv_regress/Makefile
index 2c853fa..f2e318f 100644
--- a/verilog/dv/riscv_regress/Makefile
+++ b/verilog/dv/riscv_regress/Makefile
@@ -1,10 +1,32 @@
-#------------------------------------------------------------------------------
-# Makefile for SCR1
-#------------------------------------------------------------------------------
-SIM ?= RTL
-DUMP ?= OFF
-RISC_CORE ?=0
+# ---- Include Partitioned Makefiles ----
+
+CONFIG = caravel_user_project
+
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+
+export root_dir := $(shell pwd)
+export bld_dir := $(root_dir)/build/$(current_goal)_$(BUS)_$(CFG)_$(ARCH)_IPIC_$(IPIC)_TCM_$(TCM)_VIRQ_$(VECT_IRQ)_TRACE_$(TRACE)
+DESIGNS?=${root_dir}/../../..
+
+UPRJ_TESTS_PATH = $(root_dir)
+
+export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
+## YIFIVE FIRMWARE
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+GCC64_PREFIX?=riscv64-unknown-elf
+
+
+## Simulation mode: RTL/GL
+SIM?=RTL
+DUMP?=OFF
+RISC_CORE?=0
+
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
# PARAMETERS
@@ -118,38 +140,16 @@
endif
-export root_dir := $(shell pwd)
-export bld_dir := $(root_dir)/build/$(current_goal)_$(BUS)_$(CFG)_$(ARCH)_IPIC_$(IPIC)_TCM_$(TCM)_VIRQ_$(VECT_IRQ)_TRACE_$(TRACE)
-
-## Caravel Pointers related to build directory
-CARAVEL_ROOT ?= $(root_dir)/../../../caravel
-CARAVEL_PATH ?= $(CARAVEL_ROOT)
-CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
-CARAVEL_VERILOG_PATH = $(CARAVEL_PATH)/verilog
-CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
-CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
-
## User Project Pointers
-UPRJ_VERILOG_PATH ?= $(root_dir)/../../../verilog
-UPRJ_TESTS_PATH = $(root_dir)
-UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
-UPRJ_GL_PATH = $(UPRJ_VERILOG_PATH)/gl
-UPRJ_BEHAVIOURAL_MODELS = $(root_dir)/../model
-UPRJ_BEHAVIOURAL_AGENTS = $(root_dir)/../agents
-UPRJ_INCLUDE_PATH1 = $(UPRJ_RTL_PATH)/yifive/ycr2c/src/includes
-UPRJ_INCLUDE_PATH2 = $(UPRJ_RTL_PATH)/sdram_ctrl/src/defs
-UPRJ_INCLUDE_PATH3 = $(UPRJ_RTL_PATH)/i2cm/src/includes
-UPRJ_INCLUDE_PATH4 = $(UPRJ_RTL_PATH)/usb1_host/src/includes
-UPRJ_INCLUDE_PATH5 = $(UPRJ_RTL_PATH)/mbist/include
-sv_list = ../../user_risc_regress_tb.v
+sv_list = $(root_dir)/user_risc_regress_tb.v
top_module = user_risc_regress_tb
# TB Paths
-export sim_dir := $(UPRJ_TESTS_PATH)
+export sim_dir := $(root_dir)
export tst_dir := $(sim_dir)/tests
-export inc_dir := $(UPRJ_VERILOG_PATH)/dv/firmware
+export inc_dir := $(sim_dir)/../firmware
test_results := $(bld_dir)/test_results.txt
test_info := $(bld_dir)/test_info
@@ -274,11 +274,8 @@
run_iverilog: $(test_info)
cd $(bld_dir); \
iverilog -g2005-sv -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) -I $(UPRJ_TESTS_PATH) \
+ -I $(UPRJ_TESTS_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$(sv_list) \
-o $(top_module).vvp; \
printf "" > $(test_results); \
@@ -295,11 +292,8 @@
run_iverilog_wf: $(test_info)
cd $(bld_dir); \
iverilog -g2005-sv -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) -I $(UPRJ_TESTS_PATH) \
+ -I $(UPRJ_TESTS_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$(sv_list) \
-o $(top_module).vvp; \
printf "" > $(test_results); \
diff --git a/verilog/dv/riscv_regress/riscv_runtests.sv b/verilog/dv/riscv_regress/riscv_runtests.sv
index 9a798ff..a487c7a 100644
--- a/verilog/dv/riscv_regress/riscv_runtests.sv
+++ b/verilog/dv/riscv_regress/riscv_runtests.sv
@@ -107,9 +107,9 @@
// Flush the content of dcache for signature validation at app
// memory
- force u_top.u_riscv_top.u_mintf.u_intf.u_dcache.cfg_force_flush = 1'b1;
- wait(u_top.u_riscv_top.u_mintf.u_intf.u_dcache.force_flush_done == 1'b1);
- release u_top.u_riscv_top.u_mintf.u_intf.u_dcache.cfg_force_flush;
+ force u_top.u_riscv_top.u_intf.u_dcache.cfg_force_flush = 1'b1;
+ wait(u_top.u_riscv_top.u_intf.u_dcache.force_flush_done == 1'b1);
+ release u_top.u_riscv_top.u_intf.u_dcache.cfg_force_flush;
repeat (2000) @(posedge clock); // wait data to flush in pipe
$display("STATUS: Checking Complaince Test Status .... ");
test_running <= 1'b0;
diff --git a/verilog/dv/riscv_regress/user_risc_regress_tb.v b/verilog/dv/riscv_regress/user_risc_regress_tb.v
index d915a3d..2fc3ce8 100644
--- a/verilog/dv/riscv_regress/user_risc_regress_tb.v
+++ b/verilog/dv/riscv_regress/user_risc_regress_tb.v
@@ -73,10 +73,8 @@
`timescale 1 ns / 1 ns
-`include "uprj_netlists.v"
-`include "mt48lc8m8a2.v"
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
`include "is62wvs1288.v"
-`include "user_reg_map.v"
diff --git a/verilog/dv/uart_master/Makefile b/verilog/dv/uart_master/Makefile
index 9be6ff7..0746413 100644
--- a/verilog/dv/uart_master/Makefile
+++ b/verilog/dv/uart_master/Makefile
@@ -14,88 +14,191 @@
#
# SPDX-License-Identifier: Apache-2.0
-## PDK
-PDK_PATH = $(PDK_ROOT)/sky130A
-## Caravel Pointers
-CARAVEL_ROOT ?= ../../../caravel
-CARAVEL_PATH ?= $(CARAVEL_ROOT)
-CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
-CARAVEL_VERILOG_PATH = $(CARAVEL_PATH)/verilog
-CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
-CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
+
+PWDD := $(shell pwd)
+BLOCKS := $(shell basename $(PWDD))
-## User Project Pointers
-UPRJ_VERILOG_PATH ?= ../../../verilog
-UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
-UPRJ_GL_PATH = $(UPRJ_VERILOG_PATH)/gl
-UPRJ_BEHAVIOURAL_MODELS = ../model
-UPRJ_BEHAVIOURAL_AGENTS = ../agents
-UPRJ_INCLUDE_PATH1 = $(UPRJ_RTL_PATH)/yifive/ycr2c/src/includes
-UPRJ_INCLUDE_PATH2 = $(UPRJ_RTL_PATH)/sdram_ctrl/src/defs
-UPRJ_INCLUDE_PATH3 = $(UPRJ_RTL_PATH)/i2cm/src/includes
-UPRJ_INCLUDE_PATH4 = $(UPRJ_RTL_PATH)/usb1_host/src/includes
-UPRJ_INCLUDE_PATH5 = $(UPRJ_RTL_PATH)/mbist/include
-## RISCV GCC
-GCC_PATH?=/ef/apps/bin
-GCC_PREFIX?=riscv32-unknown-elf
-GCC64_PREFIX?=riscv64-unknown-elf
+# ---- Include Partitioned Makefiles ----
-## Simulation mode: RTL/GL
-SIM_DEFINES = -DFUNCTIONAL -DSIM
+DESIGNS?=../../..
+CONFIG = caravel_user_project
+
+########################################################
+#include $(MCW_ROOT)/verilog/dv/make/env.makefile
+########################################################
+#######################################################################
+## Global Environment Variables for local repo
+#######################################################################
+
+export PDK_PATH = $(PDK_ROOT)/sky130A
+export VIP_PATH = $(CORE_VERILOG_PATH)/dv/vip
+export FIRMWARE_PATH = $(CORE_VERILOG_PATH)/dv/firmware
+
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+
+export CARAVEL_VERILOG_PATH ?= $(CARAVEL_ROOT)/verilog
+export CORE_VERILOG_PATH ?= $(CARAVEL_ROOT)/mgmt_core_wrapper/verilog
+export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
+
+export CARAVEL_PATH = $(CARAVEL_VERILOG_PATH)
+export VERILOG_PATH = $(CORE_VERILOG_PATH)
+
+#######################################################################
+## Compiler Information
+#######################################################################
+
+export GCC_PATH?= $(TOOLS)/bin
+export GCC_PREFIX?= riscv64-unknown-linux-gnu
+
+
+############## USER SPECIFIC DEFINE ##################
+
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+
+######################################################
+
+
+
+
+
+########################################################
+#include $(MCW_ROOT)/verilog/dv/make/var.makefile
+########################################################
+
+CPU=vexriscv
+CPUFAMILY=riscv
+CPUFLAGS=-march=rv32i -mabi=ilp32 -D__vexriscv__
+CPUENDIANNESS=little
+CLANG=0
+
+
+######################################################
+# include $(MCW_ROOT)/verilog/dv/make/cpu.makefile
+######################################################
+
+ifeq ($(CPU),picorv32)
+ LINKER_SCRIPT=$(FIRMWARE_PATH)/sections.lds
+ SOURCE_FILES=$(FIRMWARE_PATH)/start.s
+ VERILOG_FILES=
+endif
+
+ifeq ($(CPU),ibex)
+ LINKER_SCRIPT=$(FIRMWARE_PATH)/link_ibex.ld
+ SOURCE_FILES=$(FIRMWARE_PATH)/crt0_ibex.S $(FIRMWARE_PATH)/simple_system_common.c
+# VERILOG_FILES=../ibex/*
+ VERILOG_FILES=
+endif
+
+ifeq ($(CPU),vexriscv)
+# LINKER_SCRIPT=$(FIRMWARE_PATH)/sections_vexriscv.lds
+# SOURCE_FILES=$(FIRMWARE_PATH)/start_caravel_vexriscv.s
+ LINKER_SCRIPT=$(FIRMWARE_PATH)/sections.lds
+ SOURCE_FILES=$(FIRMWARE_PATH)/crt0_vex.S $(FIRMWARE_PATH)/isr.c
+ VERILOG_FILES=
+endif
+
+
+
+#####################################################
+#include $(MCW_ROOT)/verilog/dv/make/sim.makefile
+######################################################
+
+export IVERILOG_DUMPER = fst
+
+# RTL/GL/GL_SDF
SIM?=RTL
DUMP?=OFF
+
.SUFFIXES:
-PATTERN = uart_master
-all: ${PATTERN:=.vcd}
+all: ${BLOCKS:=.vcd} ${BLOCKS:=.lst}
-hex: ${PATTERN:=.hex}
+hex: ${BLOCKS:=.hex}
-vvp: ${PATTERN:=.vvp}
+#.SUFFIXES:
+
+##############################################################################
+# Comiple firmeware
+##############################################################################
+%.elf: %.c $(LINKER_SCRIPT) $(SOURCE_FILES)
+ ${GCC_PREFIX}-gcc -g \
+ -I$(FIRMWARE_PATH) \
+ -I$(VERILOG_PATH)/dv/generated \
+ -I$(VERILOG_PATH)/dv/ \
+ -I$(VERILOG_PATH)/common \
+ $(CPUFLAGS) \
+ -Wl,-Bstatic,-T,$(LINKER_SCRIPT),--strip-debug \
+ -ffreestanding -nostdlib -o $@ $(SOURCE_FILES) $<
+
+%.lst: %.elf
+ ${GCC_PREFIX}-objdump -d -S $< > $@
+
+%.hex: %.elf
+ ${GCC_PREFIX}-objcopy -O verilog $< $@
+ # to fix flash base address
+ sed -ie 's/@10/@00/g' $@
+
+%.bin: %.elf
+ ${GCC_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
+
+
+##############################################################################
+# Runing the simulations
+##############################################################################
%.vvp: %_tb.v %.hex
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
- iverilog -g2005-sv $(SIM_DEFINES) -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
- $< -o $@
+ iverilog -g2005-sv -Ttyp -DFUNCTIONAL -DSIM -DUSE_POWER_PINS -DUNIT_DELAY=#1 \
+ -f$(VERILOG_PATH)/includes/includes.rtl.caravel \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) -o $@ $<
else
- iverilog -g2005-sv -DWFDUMP $(SIM_DEFINES) -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
- $< -o $@
+ iverilog -g2005-sv -DWFDUMP -Ttyp -DFUNCTIONAL -DSIM -DUSE_POWER_PINS -DUNIT_DELAY=#1 \
+ -f$(VERILOG_PATH)/includes/includes.rtl.caravel \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) -o $@ $<
endif
-else
- iverilog $(SIM_DEFINES) -DGL -I $(PDK_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) -I $(CARAVEL_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I$(UPRJ_GL_PATH) -I$(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- $< -o $@
+endif
+
+## GL
+ifeq ($(SIM),GL)
+ ifeq ($(CONFIG),caravel_user_project)
+ iverilog -Ttyp -DFUNCTIONAL -DGL -DUSE_POWER_PINS -DUNIT_DELAY=#1 \
+ -f$(VERILOG_PATH)/includes/includes.gl.caravel \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.gl.$(CONFIG) -o $@ $<
+ else
+ iverilog -Ttyp -DFUNCTIONAL -DGL -DUSE_POWER_PINS -DUNIT_DELAY=#1 \
+ -f$(VERILOG_PATH)/includes/includes.gl.$(CONFIG) \
+ -f$(CARAVEL_PATH)/gl/__user_project_wrapper.v -o $@ $<
+ endif
+endif
+
+## GL+SDF
+ifeq ($(SIM),GL_SDF)
+ ifeq ($(CONFIG),caravel_user_project)
+ cvc64 +interp \
+ +define+SIM +define+FUNCTIONAL +define+GL +define+USE_POWER_PINS +define+UNIT_DELAY +define+ENABLE_SDF \
+ +change_port_type +dump2fst +fst+parallel2=on +nointeractive +notimingchecks +mipdopt \
+ -f $(VERILOG_PATH)/includes/includes.gl+sdf.caravel \
+ -f $(USER_PROJECT_VERILOG)/includes/includes.gl+sdf.$(CONFIG) $<
+ else
+ cvc64 +interp \
+ +define+SIM +define+FUNCTIONAL +define+GL +define+USE_POWER_PINS +define+UNIT_DELAY +define+ENABLE_SDF \
+ +change_port_type +dump2fst +fst+parallel2=on +nointeractive +notimingchecks +mipdopt \
+ -f $(VERILOG_PATH)/includes/includes.gl+sdf.$(CONFIG) \
+ -f $CARAVEL_PATH/gl/__user_project_wrapper.v $<
+ endif
endif
%.vcd: %.vvp
- vvp $<
+ vvp $<
-%.elf: %.c $(CARAVEL_FIRMWARE_PATH)/sections.lds $(CARAVEL_FIRMWARE_PATH)/start.s check-env
- ${GCC64_PREFIX}-gcc -I $(CARAVEL_PATH) -march=rv32imc -mabi=ilp32 -Wl,-Bstatic,-T,$(CARAVEL_FIRMWARE_PATH)/sections.lds,--strip-debug -ffreestanding -nostdlib -o $@ $(CARAVEL_FIRMWARE_PATH)/start.s $<
-
-%.hex: %.elf
- ${GCC64_PREFIX}-objcopy -O verilog $< $@
- # to fix flash base address
- sed -i 's/@10000000/@00000000/g' $@
-
-%.bin: %.elf
- ${GCC64_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
+# twinwave: RTL-%.vcd GL-%.vcd
+# twinwave RTL-$@ * + GL-$@ *
check-env:
ifndef PDK_ROOT
@@ -104,17 +207,18 @@
ifeq (,$(wildcard $(PDK_ROOT)/sky130A))
$(error $(PDK_ROOT)/sky130A not found, please install pdk before running make)
endif
-#ifeq (,$(wildcard $(GCC64_PREFIX)-gcc ))
-# $(error $(GCC64_PREFIX)-gcc is not found, please export GCC_PATH and GCC_PREFIX before running make)
-#endif
+ifeq (,$(wildcard $(GCC_PREFIX)-gcc ))
+ $(error $(GCC_PREFIX)-gcc is not found, please export GCC_PATH and GCC_PREFIX before running make)
+endif
# check for efabless style installation
ifeq (,$(wildcard $(PDK_ROOT)/sky130A/libs.ref/*/verilog))
SIM_DEFINES := ${SIM_DEFINES} -DEF_STYLE
endif
+
# ---- Clean ----
clean:
- rm -f *.elf *.hex *.bin *.vvp *.vcd *.log
+ \rm -f *.elf *.hex *.bin *.vvp *.log *.vcd *.lst *.hexe
.PHONY: clean hex all
diff --git a/verilog/dv/uart_master/uart_master.c b/verilog/dv/uart_master/uart_master.c
index 1f5912a..46d6e97 100644
--- a/verilog/dv/uart_master/uart_master.c
+++ b/verilog/dv/uart_master/uart_master.c
@@ -16,8 +16,9 @@
*/
// This include is relative to $CARAVEL_PATH (see Makefile)
-#include "verilog/dv/caravel/defs.h"
-#include "verilog/dv/caravel/stub.c"
+#include <defs.h>
+#include <stub.c>
+#include "../c_func/inc/user_reg_map.h"
// User Project Slaves (0x3000_0000)
@@ -61,37 +62,40 @@
/* Set up the housekeeping SPI to be connected internally so */
/* that external pin changes don't affect it. */
- reg_spimaster_config = 0xa002; // Enable, prescaler = 2,
+ reg_spi_enable = 1;
+ reg_wb_enable = 1;
+ // reg_spimaster_config = 0xa002; // Enable, prescaler = 2,
// connect to housekeeping SPI
// Connect the housekeeping SPI to the SPI master
// so that the CSB line is not left floating. This allows
// all of the GPIO pins to be used for user functions.
- reg_mprj_io_31 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_30 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_29 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_28 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_27 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_26 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_25 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_24 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_23 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_22 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_21 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_20 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_19 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_18 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_17 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_mprj_io_16 = GPIO_MODE_MGMT_STD_OUTPUT;
+ reg_mprj_io_31 = GPIO_MODE_MGMT_STD_OUTPUT;
+ reg_mprj_io_30 = GPIO_MODE_MGMT_STD_OUTPUT;
+ reg_mprj_io_29 = GPIO_MODE_MGMT_STD_OUTPUT;
+ reg_mprj_io_28 = GPIO_MODE_MGMT_STD_OUTPUT;
+ reg_mprj_io_27 = GPIO_MODE_MGMT_STD_OUTPUT;
+ reg_mprj_io_26 = GPIO_MODE_MGMT_STD_OUTPUT;
+ reg_mprj_io_25 = GPIO_MODE_MGMT_STD_OUTPUT;
+ reg_mprj_io_24 = GPIO_MODE_MGMT_STD_OUTPUT;
+ reg_mprj_io_23 = GPIO_MODE_MGMT_STD_OUTPUT;
+ reg_mprj_io_22 = GPIO_MODE_MGMT_STD_OUTPUT;
+ reg_mprj_io_21 = GPIO_MODE_MGMT_STD_OUTPUT;
+ reg_mprj_io_20 = GPIO_MODE_MGMT_STD_OUTPUT;
+ reg_mprj_io_19 = GPIO_MODE_MGMT_STD_OUTPUT;
+ reg_mprj_io_18 = GPIO_MODE_MGMT_STD_OUTPUT;
+ reg_mprj_io_17 = GPIO_MODE_MGMT_STD_OUTPUT;
+ reg_mprj_io_16 = GPIO_MODE_MGMT_STD_OUTPUT;
- reg_la0_oenb = reg_la0_iena = 0x0000000;
/* Apply configuration */
reg_mprj_xfer = 1;
while (reg_mprj_xfer == 1);
- reg_mprj_datal = 0xAB600000;
- reg_la0_oenb = reg_la0_iena = 0x0000000;
+ reg_la0_oenb = reg_la0_iena = 0xFFFFFFFF; // [31:0]
+
+ // Flag start of the test
+ reg_mprj_datal = 0xAB600000;
//-----------------------------------------------------
// Start of User Functionality and take over the GPIO Pins
diff --git a/verilog/dv/uart_master/uart_master_tb.v b/verilog/dv/uart_master/uart_master_tb.v
index 1442c8c..2b021ee 100644
--- a/verilog/dv/uart_master/uart_master_tb.v
+++ b/verilog/dv/uart_master/uart_master_tb.v
@@ -16,14 +16,7 @@
`default_nettype none
`timescale 1 ns / 1 ps
-
-`define FULL_CHIP_SIM
-
-`include "uprj_netlists.v"
-`include "caravel_netlists.v"
-`include "spiflash.v"
`include "uart_agent.v"
-`include "user_reg_map.v"
module uart_master_tb;
reg clock;
@@ -116,13 +109,16 @@
uart_timeout = 600;// wait time limit
uart_fifo_enable = 0; // fifo mode disable
tb_master_uart.debug_mode = 0; // disable debug display
+
+ #200; // Wait for reset removal
+
+ wait(checkbits == 16'h AB60);
+ $display("Monitor: UART Master Test Started");
+
+ repeat (50000) @(posedge clock);
tb_master_uart.uart_init;
tb_master_uart.control_setup (uart_data_bit, uart_stop_bits, uart_parity_en, uart_even_odd_parity,
uart_stick_parity, uart_timeout, uart_divisor);
- wait(checkbits == 16'h AB60);
- $display("Monitor: UART Master Test Started");
-
- repeat (4000) @(posedge clock);
//$write ("\n(%t)Response:\n",$time);
flag = 0;
while(flag == 0)
@@ -279,4 +275,7 @@
`include "uart_master_tasks.sv"
endmodule
+
+// SSFLASH has 1ps/1ps time scale
+`include "s25fl256s.sv"
`default_nettype wire
diff --git a/verilog/dv/user_basic/Makefile b/verilog/dv/user_basic/Makefile
index e534f3b..37feef0 100644
--- a/verilog/dv/user_basic/Makefile
+++ b/verilog/dv/user_basic/Makefile
@@ -14,40 +14,28 @@
#
# SPDX-License-Identifier: Apache-2.0
-## Caravel Pointers
-CARAVEL_ROOT ?= ../../../caravel
-CARAVEL_PATH ?= $(CARAVEL_ROOT)
-CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
-CARAVEL_VERILOG_PATH = $(CARAVEL_PATH)/verilog
-CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
-CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
+# ---- Include Partitioned Makefiles ----
-## User Project Pointers
-UPRJ_VERILOG_PATH ?= ../../../verilog
-UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
-UPRJ_GL_PATH = $(UPRJ_VERILOG_PATH)/gl
-UPRJ_BEHAVIOURAL_MODELS = ../model
-UPRJ_BEHAVIOURAL_AGENTS = ../agents
-UPRJ_INCLUDE_PATH1 = $(UPRJ_RTL_PATH)/yifive/ycr2c/src/includes
-UPRJ_INCLUDE_PATH2 = $(UPRJ_RTL_PATH)/sdram_ctrl/src/defs
-UPRJ_INCLUDE_PATH3 = $(UPRJ_RTL_PATH)/i2cm/src/includes
-UPRJ_INCLUDE_PATH4 = $(UPRJ_RTL_PATH)/usb1_host/src/includes
-UPRJ_INCLUDE_PATH5 = $(UPRJ_RTL_PATH)/mbist/include
+CONFIG = caravel_user_project
+
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
-## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(UPRJ_VERILOG_PATH)/dv/firmware
-GCC64_PREFIX?=riscv64-unknown-elf
+DESIGNS?=../../..
-## RISCV GCC
-GCC_PATH?=/ef/apps/bin
-GCC_PREFIX?=riscv32-unknown-elf
-PDK_PATH?=/ef/tech/SW/sky130A
+export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
+
## Simulation mode: RTL/GL
SIM?=RTL
DUMP?=OFF
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
.SUFFIXES:
PATTERN = user_basic
@@ -62,40 +50,22 @@
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
else
iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
else
iverilog -g2012 -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) -I $(CARAVEL_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_GL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
%.vcd: %.vvp
vvp $<
-%.elf: %.c $(CARAVEL_FIRMWARE_PATH)/sections.lds $(CARAVEL_FIRMWARE_PATH)/start.s
- ${GCC64_PREFIX}-gcc -I $(CARAVEL_PATH) -march=rv32imc -mabi=ilp32 -Wl,-Bstatic,-T,$(CARAVEL_FIRMWARE_PATH)/sections.lds,--strip-debug -ffreestanding -nostdlib -o $@ $(CARAVEL_FIRMWARE_PATH)/start.s $<
-
-%.hex:
- echo @"This is user boot test, noting to compile the mangment core code"
-
-%.bin: %.elf
- ${GCC64_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
# ---- Clean ----
diff --git a/verilog/dv/user_basic/user_basic_tb.v b/verilog/dv/user_basic/user_basic_tb.v
index 9ee701c..99c4ac6 100644
--- a/verilog/dv/user_basic/user_basic_tb.v
+++ b/verilog/dv/user_basic/user_basic_tb.v
@@ -74,9 +74,7 @@
`timescale 1 ns/10 ps
-`include "uprj_netlists.v"
-`include "user_reg_map.v"
-
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
module user_basic_tb;
parameter CLK1_PERIOD = 10;
@@ -153,7 +151,7 @@
`ifdef WFDUMP
initial begin
$dumpfile("simx.vcd");
- $dumpvars(4, user_basic_tb);
+ $dumpvars(0, user_basic_tb);
end
`endif
@@ -242,8 +240,8 @@
wb_user_core_write(`ADDR_SPACE_WBHOST+`WBHOST_GLBL_CFG,'h1);
wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_1,read_data,32'h8273_8343);
- wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_2,read_data,32'h1603_2022);
- wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_3,read_data,32'h0003_9000);
+ wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_2,read_data,32'h2603_2022);
+ wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_3,read_data,32'h0004_0000);
end
diff --git a/verilog/dv/user_i2cm/Makefile b/verilog/dv/user_i2cm/Makefile
index 6f0b848..e7d9b13 100644
--- a/verilog/dv/user_i2cm/Makefile
+++ b/verilog/dv/user_i2cm/Makefile
@@ -14,40 +14,31 @@
#
# SPDX-License-Identifier: Apache-2.0
-## Caravel Pointers
-CARAVEL_ROOT ?= ../../../caravel
-CARAVEL_PATH ?= $(CARAVEL_ROOT)
-CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
-CARAVEL_VERILOG_PATH = $(CARAVEL_PATH)/verilog
-CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
-CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
+# ---- Include Partitioned Makefiles ----
-## User Project Pointers
-UPRJ_VERILOG_PATH ?= ../../../verilog
-UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
-UPRJ_GL_PATH = $(UPRJ_VERILOG_PATH)/gl
-UPRJ_BEHAVIOURAL_MODELS = ../model
-UPRJ_BEHAVIOURAL_AGENTS = ../agents
-UPRJ_INCLUDE_PATH1 = $(UPRJ_RTL_PATH)/yifive/ycr2c/src/includes
-UPRJ_INCLUDE_PATH2 = $(UPRJ_RTL_PATH)/sdram_ctrl/src/defs
-UPRJ_INCLUDE_PATH3 = $(UPRJ_RTL_PATH)/i2cm/src/includes
-UPRJ_INCLUDE_PATH4 = $(UPRJ_RTL_PATH)/usb1_host/src/includes
-UPRJ_INCLUDE_PATH5 = $(UPRJ_RTL_PATH)/mbist/include
+CONFIG = caravel_user_project
+
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+DESIGNS?=../../..
+
+export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(UPRJ_VERILOG_PATH)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
GCC64_PREFIX?=riscv64-unknown-elf
-## RISCV GCC
-GCC_PATH?=/ef/apps/bin
-GCC_PREFIX?=riscv32-unknown-elf
-PDK_PATH?=/ef/tech/SW/sky130A
## Simulation mode: RTL/GL
SIM?=RTL
DUMP?=OFF
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
.SUFFIXES:
PATTERN = user_i2cm
@@ -59,49 +50,25 @@
vvp: ${PATTERN:=.vvp}
%.vvp: %_tb.v
- ${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=1 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\" -c -I./ -I$(YIFIVE_FIRMWARE_PATH) user_uart.c -o user_uart.o
- ${GCC64_PREFIX}-gcc -O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las -D__RVC_EXT -static -std=gnu99 -fno-common -fno-builtin-printf -DTCM=1 -Wa,-march=rv32imc -march=rv32imc -mabi=ilp32 -DFLAGS_STR=\""-O2 -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las "\" -D__ASSEMBLY__=1 -c -I./ -I$(YIFIVE_FIRMWARE_PATH) $(YIFIVE_FIRMWARE_PATH)/crt_tcm.S -o crt_tcm.o
- ${GCC64_PREFIX}-gcc -o user_uart.elf -T $(YIFIVE_FIRMWARE_PATH)/link_tcm.ld user_uart.o crt_tcm.o -nostartfiles -nostdlib -lc -lgcc -march=rv32imc -mabi=ilp32
- ${GCC64_PREFIX}-objcopy -O verilog user_uart.elf user_uart.hex
- ${GCC64_PREFIX}-objdump -D user_uart.elf > user_uart.dump
- rm crt_tcm.o user_uart.o
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
else
- iverilog -g2005-sv -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
else
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) -I $(CARAVEL_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_GL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
%.vcd: %.vvp
vvp $<
-%.elf: %.c $(CARAVEL_FIRMWARE_PATH)/sections.lds $(CARAVEL_FIRMWARE_PATH)/start.s
- ${GCC64_PREFIX}-gcc -I $(CARAVEL_PATH) -march=rv32imc -mabi=ilp32 -Wl,-Bstatic,-T,$(CARAVEL_FIRMWARE_PATH)/sections.lds,--strip-debug -ffreestanding -nostdlib -o $@ $(CARAVEL_FIRMWARE_PATH)/start.s $<
-
-%.hex:
- echo @"This is user boot test, noting to compile the mangment core code"
-
-%.bin: %.elf
- ${GCC64_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
# ---- Clean ----
diff --git a/verilog/dv/user_i2cm/user_i2cm_tb.v b/verilog/dv/user_i2cm/user_i2cm_tb.v
index c9bcd8b..6be9759 100644
--- a/verilog/dv/user_i2cm/user_i2cm_tb.v
+++ b/verilog/dv/user_i2cm/user_i2cm_tb.v
@@ -65,9 +65,8 @@
`timescale 1 ns / 1 ns
-`include "uprj_netlists.v"
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
`include "i2c_slave_model.v"
-`include "user_reg_map.v"
module tb_top;
diff --git a/verilog/dv/user_pwm/Makefile b/verilog/dv/user_pwm/Makefile
index 220c33c..96815e2 100644
--- a/verilog/dv/user_pwm/Makefile
+++ b/verilog/dv/user_pwm/Makefile
@@ -14,37 +14,31 @@
#
# SPDX-License-Identifier: Apache-2.0
-## Caravel Pointers
-CARAVEL_ROOT ?= ../../../caravel
-CARAVEL_PATH ?= $(CARAVEL_ROOT)
-CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
-CARAVEL_VERILOG_PATH = $(CARAVEL_PATH)/verilog
-CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
-CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
+# ---- Include Partitioned Makefiles ----
-## User Project Pointers
-UPRJ_VERILOG_PATH ?= ../../../verilog
-UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
-UPRJ_GL_PATH = $(UPRJ_VERILOG_PATH)/gl
-UPRJ_BEHAVIOURAL_MODELS = ../model
-UPRJ_BEHAVIOURAL_AGENTS = ../agents
-UPRJ_INCLUDE_PATH1 = $(UPRJ_RTL_PATH)/yifive/ycr1c/src/includes
-UPRJ_INCLUDE_PATH2 = $(UPRJ_RTL_PATH)/i2cm/src/includes
-UPRJ_INCLUDE_PATH3 = $(UPRJ_RTL_PATH)/usb1_host/src/includes
+CONFIG = caravel_user_project
+
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+DESIGNS?=../../..
+
+export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(UPRJ_VERILOG_PATH)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
GCC64_PREFIX?=riscv64-unknown-elf
-## RISCV GCC
-GCC_PATH?=/ef/apps/bin
-GCC_PREFIX?=riscv32-unknown-elf
-PDK_PATH?=/opt/pdk/sky130A
## Simulation mode: RTL/GL
SIM?=RTL
DUMP?=OFF
+RISC_CORE?=0
+
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
.SUFFIXES:
@@ -58,36 +52,23 @@
%.vvp: %_tb.v
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) \
- -I $(UPRJ_INCLUDE_PATH3) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
else
- iverilog -g2005-sv -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) \
- -I $(UPRJ_INCLUDE_PATH3) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
else
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) -I $(CARAVEL_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_GL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
%.vcd: %.vvp
vvp $<
-%.hex:
- echo @"This is user boot test, noting to compile the mangment core code"
-
# ---- Clean ----
diff --git a/verilog/dv/user_pwm/user_pwm_tb.v b/verilog/dv/user_pwm/user_pwm_tb.v
index 575d604..cbe03cb 100644
--- a/verilog/dv/user_pwm/user_pwm_tb.v
+++ b/verilog/dv/user_pwm/user_pwm_tb.v
@@ -64,13 +64,12 @@
`default_nettype wire
-`timescale 1 ns / 1 ns
+`timescale 1 ns / 1 ps
`define TB_GLBL user_pwm_tb
-`include "uprj_netlists.v"
-`include "user_reg_map.v"
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
module user_pwm_tb;
diff --git a/verilog/dv/user_qspi/Makefile b/verilog/dv/user_qspi/Makefile
index 250d502..1932afc 100644
--- a/verilog/dv/user_qspi/Makefile
+++ b/verilog/dv/user_qspi/Makefile
@@ -14,39 +14,31 @@
#
# SPDX-License-Identifier: Apache-2.0
-## Caravel Pointers
-CARAVEL_ROOT ?= ../../../caravel
-CARAVEL_PATH ?= $(CARAVEL_ROOT)
-CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
-CARAVEL_VERILOG_PATH = $(CARAVEL_PATH)/verilog
-CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
-CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
+# ---- Include Partitioned Makefiles ----
-## User Project Pointers
-UPRJ_VERILOG_PATH ?= ../../../verilog
-UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
-UPRJ_GL_PATH = $(UPRJ_VERILOG_PATH)/gl
-UPRJ_BEHAVIOURAL_MODELS = ../model
-UPRJ_BEHAVIOURAL_AGENTS = ../agents
-UPRJ_INCLUDE_PATH1 = $(UPRJ_RTL_PATH)/yifive/ycr2c/src/includes
-UPRJ_INCLUDE_PATH2 = $(UPRJ_RTL_PATH)/sdram_ctrl/src/defs
-UPRJ_INCLUDE_PATH3 = $(UPRJ_RTL_PATH)/i2cm/src/includes
-UPRJ_INCLUDE_PATH4 = $(UPRJ_RTL_PATH)/usb1_host/src/includes
-UPRJ_INCLUDE_PATH5 = $(UPRJ_RTL_PATH)/mbist/include
+CONFIG = caravel_user_project
+
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+DESIGNS?=../../..
+
+export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(UPRJ_VERILOG_PATH)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
GCC64_PREFIX?=riscv64-unknown-elf
-## RISCV GCC
-GCC_PATH?=/ef/apps/bin
-GCC_PREFIX?=riscv32-unknown-elf
-PDK_PATH?=/ef/tech/SW/sky130A
## Simulation mode: RTL/GL
SIM?=RTL
DUMP?=OFF
+RISC_CORE?=0
+
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
.SUFFIXES:
@@ -60,36 +52,23 @@
%.vvp: %_tb.v
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
else
- iverilog -g2005-sv -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
else
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) -I $(CARAVEL_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_GL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
%.vcd: %.vvp
vvp $<
-%.hex:
- echo @"This is user boot test, noting to compile the mangment core code"
-
# ---- Clean ----
diff --git a/verilog/dv/user_qspi/user_qspi_tb.v b/verilog/dv/user_qspi/user_qspi_tb.v
index 3b4d47a..fdac089 100644
--- a/verilog/dv/user_qspi/user_qspi_tb.v
+++ b/verilog/dv/user_qspi/user_qspi_tb.v
@@ -77,13 +77,10 @@
`default_nettype wire
-`timescale 1 ns / 1 ns
+`timescale 1 ns/1 ps
-`include "uprj_netlists.v"
-`include "mt48lc8m8a2.v"
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
`include "is62wvs1288.v"
-`include "user_reg_map.v"
-
module user_qspi_tb;
reg clock;
diff --git a/verilog/dv/user_risc_boot/Makefile b/verilog/dv/user_risc_boot/Makefile
index 46c4437..4a0c488 100644
--- a/verilog/dv/user_risc_boot/Makefile
+++ b/verilog/dv/user_risc_boot/Makefile
@@ -14,41 +14,32 @@
#
# SPDX-License-Identifier: Apache-2.0
-## Caravel Pointers
-CARAVEL_ROOT ?= ../../../caravel
-CARAVEL_PATH ?= $(CARAVEL_ROOT)
-CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
-CARAVEL_VERILOG_PATH = $(CARAVEL_PATH)/verilog
-CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
-CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
+# ---- Include Partitioned Makefiles ----
-## User Project Pointers
-UPRJ_VERILOG_PATH ?= ../../../verilog
-UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
-UPRJ_GL_PATH = $(UPRJ_VERILOG_PATH)/gl
-UPRJ_BEHAVIOURAL_MODELS = ../model
-UPRJ_BEHAVIOURAL_AGENTS = ../agents
-UPRJ_INCLUDE_PATH1 = $(UPRJ_RTL_PATH)/yifive/ycr2c/src/includes
-UPRJ_INCLUDE_PATH2 = $(UPRJ_RTL_PATH)/sdram_ctrl/src/defs
-UPRJ_INCLUDE_PATH3 = $(UPRJ_RTL_PATH)/i2cm/src/includes
-UPRJ_INCLUDE_PATH4 = $(UPRJ_RTL_PATH)/usb1_host/src/includes
-UPRJ_INCLUDE_PATH5 = $(UPRJ_RTL_PATH)/mbist/include
+CONFIG = caravel_user_project
+
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+DESIGNS?=../../..
+
+export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(UPRJ_VERILOG_PATH)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
GCC64_PREFIX?=riscv64-unknown-elf
-## RISCV GCC
-GCC_PATH?=/ef/apps/bin
-GCC_PREFIX?=riscv32-unknown-elf
-PDK_PATH?=/ef/tech/SW/sky130A
## Simulation mode: RTL/GL
SIM?=RTL
DUMP?=OFF
RISC_CORE?=0
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
.SUFFIXES:
PATTERN = user_risc_boot
@@ -68,41 +59,23 @@
rm crt.o user_risc_boot.o
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
else
- iverilog -g2005-sv -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
else
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) -I $(CARAVEL_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_GL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
%.vcd: %.vvp
vvp $< +risc_core_id=$(RISC_CORE)
-%.elf: %.c $(CARAVEL_FIRMWARE_PATH)/sections.lds $(CARAVEL_FIRMWARE_PATH)/start.s
- ${GCC64_PREFIX}-gcc -I $(CARAVEL_PATH) -march=rv32imc -mabi=ilp32 -Wl,-Bstatic,-T,$(CARAVEL_FIRMWARE_PATH)/sections.lds,--strip-debug -ffreestanding -nostdlib -o $@ $(CARAVEL_FIRMWARE_PATH)/start.s $<
-
-%.hex:
- echo @"This is user boot test, noting to compile the mangment core code"
-
-%.bin: %.elf
- ${GCC64_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
# ---- Clean ----
diff --git a/verilog/dv/user_risc_boot/user_risc_boot_tb.v b/verilog/dv/user_risc_boot/user_risc_boot_tb.v
index c9e68da..82bd34a 100644
--- a/verilog/dv/user_risc_boot/user_risc_boot_tb.v
+++ b/verilog/dv/user_risc_boot/user_risc_boot_tb.v
@@ -74,11 +74,7 @@
`timescale 1 ns / 1 ns
-`include "uprj_netlists.v"
-`include "mt48lc8m8a2.v"
-`include "user_reg_map.v"
-
-`define ADDR_SPACE_PINMUX 32'h3002_0000
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
module user_risc_boot_tb;
reg clock;
reg wb_rst_i;
@@ -128,8 +124,8 @@
`ifdef WFDUMP
initial begin
- $dumpfile("risc_boot.vcd");
- $dumpvars(2, user_risc_boot_tb);
+ $dumpfile("simx.vcd");
+ $dumpvars(3, user_risc_boot_tb);
end
`endif
@@ -174,23 +170,13 @@
// 0x3000002C = 0x66778899;
test_fail = 0;
- wb_user_core_read(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_1,read_data);
- if(read_data != 32'h11223344) test_fail = 1;
+ wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_1,read_data,32'h11223344);
+ wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_2,read_data,32'h22334455);
+ wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_3,read_data,32'h33445566);
+ wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_4,read_data,32'h44556677);
+ wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_5,read_data,32'h55667788);
+ wb_user_core_read_check(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_6,read_data,32'h66778899);
- wb_user_core_read(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_2,read_data);
- if(read_data != 32'h22334455) test_fail = 1;
-
- wb_user_core_read(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_3,read_data);
- if(read_data != 32'h33445566) test_fail = 1;
-
- wb_user_core_read(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_4,read_data);
- if(read_data!= 32'h44556677) test_fail = 1;
-
- wb_user_core_read(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_5,read_data);
- if(read_data!= 32'h55667788) test_fail = 1;
-
- wb_user_core_read(`ADDR_SPACE_PINMUX+`PINMUX_SOFT_REG_6,read_data) ;
- if(read_data != 32'h66778899) test_fail = 1;
$display("###################################################");
@@ -357,6 +343,40 @@
end
endtask
+task wb_user_core_read_check;
+input [31:0] address;
+output [31:0] data;
+input [31:0] cmp_data;
+reg [31:0] data;
+begin
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_adr_i =address; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='0; // data output
+ wbd_ext_sel_i ='hF; // byte enable
+ wbd_ext_cyc_i ='h1; // strobe/request
+ wbd_ext_stb_i ='h1; // strobe/request
+ wait(wbd_ext_ack_o == 1);
+ data = wbd_ext_dat_o;
+ repeat (1) @(posedge clock);
+ #1;
+ wbd_ext_cyc_i ='h0; // strobe/request
+ wbd_ext_stb_i ='h0; // strobe/request
+ wbd_ext_adr_i ='h0; // address
+ wbd_ext_we_i ='h0; // write
+ wbd_ext_dat_i ='h0; // data output
+ wbd_ext_sel_i ='h0; // byte enable
+ if(data !== cmp_data) begin
+ $display("ERROR : WB USER ACCESS READ Address : 0x%x, Exd: 0x%x Rxd: 0x%x ",address,cmp_data,data);
+ test_fail = 1;
+ end else begin
+ $display("STATUS: WB USER ACCESS READ Address : 0x%x, Data : 0x%x",address,data);
+ end
+ repeat (2) @(posedge clock);
+end
+endtask
+
`ifdef GL
wire wbd_spi_stb_i = u_top.u_spi_master.wbd_stb_i;
diff --git a/verilog/dv/user_sspi/.user_sspi_tb.v.swp b/verilog/dv/user_sspi/.user_sspi_tb.v.swp
deleted file mode 100644
index 7af26eb..0000000
--- a/verilog/dv/user_sspi/.user_sspi_tb.v.swp
+++ /dev/null
Binary files differ
diff --git a/verilog/dv/user_sspi/Makefile b/verilog/dv/user_sspi/Makefile
index 0f8d1a7..9d8bd45 100644
--- a/verilog/dv/user_sspi/Makefile
+++ b/verilog/dv/user_sspi/Makefile
@@ -14,39 +14,31 @@
#
# SPDX-License-Identifier: Apache-2.0
-## Caravel Pointers
-CARAVEL_ROOT ?= ../../../caravel
-CARAVEL_PATH ?= $(CARAVEL_ROOT)
-CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
-CARAVEL_VERILOG_PATH = $(CARAVEL_PATH)/verilog
-CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
-CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
+# ---- Include Partitioned Makefiles ----
-## User Project Pointers
-UPRJ_VERILOG_PATH ?= ../../../verilog
-UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
-UPRJ_GL_PATH = $(UPRJ_VERILOG_PATH)/gl
-UPRJ_BEHAVIOURAL_MODELS = ../model
-UPRJ_BEHAVIOURAL_AGENTS = ../agents
-UPRJ_INCLUDE_PATH1 = $(UPRJ_RTL_PATH)/yifive/ycr2c/src/includes
-UPRJ_INCLUDE_PATH2 = $(UPRJ_RTL_PATH)/sdram_ctrl/src/defs
-UPRJ_INCLUDE_PATH3 = $(UPRJ_RTL_PATH)/i2cm/src/includes
-UPRJ_INCLUDE_PATH4 = $(UPRJ_RTL_PATH)/usb1_host/src/includes
-UPRJ_INCLUDE_PATH5 = $(UPRJ_RTL_PATH)/mbist/include
+CONFIG = caravel_user_project
+
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+DESIGNS?=../../..
+
+export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(UPRJ_VERILOG_PATH)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
GCC64_PREFIX?=riscv64-unknown-elf
-## RISCV GCC
-GCC_PATH?=/ef/apps/bin
-GCC_PREFIX?=riscv32-unknown-elf
-PDK_PATH?=/opt/pdk/sky130A
## Simulation mode: RTL/GL
SIM?=RTL
DUMP?=OFF
+RISC_CORE?=0
+
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
.SUFFIXES:
@@ -60,36 +52,23 @@
%.vvp: %_tb.v
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
else
- iverilog -g2005-sv -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
else
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) -I $(CARAVEL_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_GL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
%.vcd: %.vvp
vvp $<
-%.hex:
- echo @"This is user boot test, noting to compile the mangment core code"
-
# ---- Clean ----
diff --git a/verilog/dv/user_sspi/user_sspi_tb.v b/verilog/dv/user_sspi/user_sspi_tb.v
index 512e40d..6b6cbb4 100644
--- a/verilog/dv/user_sspi/user_sspi_tb.v
+++ b/verilog/dv/user_sspi/user_sspi_tb.v
@@ -64,14 +64,13 @@
`default_nettype wire
-`timescale 1 ns / 1 ns
+`timescale 1 ns/1 ps
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
+`include "is62wvs1288.v"
`define TB_GLBL user_sspi_tb
-`include "uprj_netlists.v"
-`include "is62wvs1288.v"
-`include "user_reg_map.v"
diff --git a/verilog/dv/user_timer/Makefile b/verilog/dv/user_timer/Makefile
index cda351b..6520c31 100644
--- a/verilog/dv/user_timer/Makefile
+++ b/verilog/dv/user_timer/Makefile
@@ -14,37 +14,31 @@
#
# SPDX-License-Identifier: Apache-2.0
-## Caravel Pointers
-CARAVEL_ROOT ?= ../../../caravel
-CARAVEL_PATH ?= $(CARAVEL_ROOT)
-CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
-CARAVEL_VERILOG_PATH = $(CARAVEL_PATH)/verilog
-CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
-CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
+# ---- Include Partitioned Makefiles ----
-## User Project Pointers
-UPRJ_VERILOG_PATH ?= ../../../verilog
-UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
-UPRJ_GL_PATH = $(UPRJ_VERILOG_PATH)/gl
-UPRJ_BEHAVIOURAL_MODELS = ../model
-UPRJ_BEHAVIOURAL_AGENTS = ../agents
-UPRJ_INCLUDE_PATH1 = $(UPRJ_RTL_PATH)/yifive/ycr1c/src/includes
-UPRJ_INCLUDE_PATH2 = $(UPRJ_RTL_PATH)/i2cm/src/includes
-UPRJ_INCLUDE_PATH3 = $(UPRJ_RTL_PATH)/usb1_host/src/includes
+CONFIG = caravel_user_project
+
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+DESIGNS?=../../..
+
+export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(UPRJ_VERILOG_PATH)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
GCC64_PREFIX?=riscv64-unknown-elf
-## RISCV GCC
-GCC_PATH?=/ef/apps/bin
-GCC_PREFIX?=riscv32-unknown-elf
-PDK_PATH?=/opt/pdk/sky130A
## Simulation mode: RTL/GL
SIM?=RTL
DUMP?=OFF
+RISC_CORE?=0
+
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
.SUFFIXES:
@@ -58,36 +52,23 @@
%.vvp: %_tb.v
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) \
- -I $(UPRJ_INCLUDE_PATH3) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
else
- iverilog -g2005-sv -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) \
- -I $(UPRJ_INCLUDE_PATH3) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
else
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) -I $(CARAVEL_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_GL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
%.vcd: %.vvp
vvp $<
-%.hex:
- echo @"This is user boot test, noting to compile the mangment core code"
-
# ---- Clean ----
diff --git a/verilog/dv/user_timer/user_timer_tb.v b/verilog/dv/user_timer/user_timer_tb.v
index f2d7f11..d7ef5e6 100644
--- a/verilog/dv/user_timer/user_timer_tb.v
+++ b/verilog/dv/user_timer/user_timer_tb.v
@@ -64,12 +64,11 @@
`default_nettype wire
-`timescale 1 ns / 1 ns
+`timescale 1 ns / 1 ps
`define TB_GLBL user_timer_tb
-`include "uprj_netlists.v"
-`include "user_reg_map.v"
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
module user_timer_tb;
diff --git a/verilog/dv/user_uart/Makefile b/verilog/dv/user_uart/Makefile
index 320f113..97726ee 100644
--- a/verilog/dv/user_uart/Makefile
+++ b/verilog/dv/user_uart/Makefile
@@ -14,48 +14,38 @@
#
# SPDX-License-Identifier: Apache-2.0
-## Caravel Pointers
-CARAVEL_ROOT ?= ../../../caravel
-CARAVEL_PATH ?= $(CARAVEL_ROOT)
-CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
-CARAVEL_VERILOG_PATH = $(CARAVEL_PATH)/verilog
-CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
-CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
+# ---- Include Partitioned Makefiles ----
-## User Project Pointers
-UPRJ_VERILOG_PATH ?= ../../../verilog
-UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
-UPRJ_GL_PATH = $(UPRJ_VERILOG_PATH)/gl
-UPRJ_BEHAVIOURAL_MODELS = ../model
-UPRJ_BEHAVIOURAL_AGENTS = ../agents
-UPRJ_INCLUDE_PATH1 = $(UPRJ_RTL_PATH)/yifive/ycr2c/src/includes
-UPRJ_INCLUDE_PATH2 = $(UPRJ_RTL_PATH)/sdram_ctrl/src/defs
-UPRJ_INCLUDE_PATH3 = $(UPRJ_RTL_PATH)/i2cm/src/includes
-UPRJ_INCLUDE_PATH4 = $(UPRJ_RTL_PATH)/usb1_host/src/includes
-UPRJ_INCLUDE_PATH5 = $(UPRJ_RTL_PATH)/mbist/include
+CONFIG = caravel_user_project
+
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+DESIGNS?=../../..
+
+export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(UPRJ_VERILOG_PATH)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
GCC64_PREFIX?=riscv64-unknown-elf
-## RISCV GCC
-GCC_PATH?=/ef/apps/bin
-GCC_PREFIX?=riscv32-unknown-elf
-PDK_PATH?=/ef/tech/SW/sky130A
## Simulation mode: RTL/GL
SIM?=RTL
DUMP?=OFF
RISC_CORE?=0
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
.SUFFIXES:
PATTERN = user_uart
all: ${PATTERN:=.vcd}
-hex: ${PATTERN:=.hex}
vvp: ${PATTERN:=.vvp}
@@ -68,41 +58,23 @@
rm crt.o user_uart.o
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
else
- iverilog -g2005-sv -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
else
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) -I $(CARAVEL_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_GL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
%.vcd: %.vvp
vvp $< +risc_core_id=$(RISC_CORE)
-%.elf: %.c $(CARAVEL_FIRMWARE_PATH)/sections.lds $(CARAVEL_FIRMWARE_PATH)/start.s
- ${GCC64_PREFIX}-gcc -I $(CARAVEL_PATH) -march=rv32imc -mabi=ilp32 -Wl,-Bstatic,-T,$(CARAVEL_FIRMWARE_PATH)/sections.lds,--strip-debug -ffreestanding -nostdlib -o $@ $(CARAVEL_FIRMWARE_PATH)/start.s $<
-
-%.hex:
- echo @"This is user boot test, noting to compile the mangment core code"
-
-%.bin: %.elf
- ${GCC64_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
# ---- Clean ----
diff --git a/verilog/dv/user_uart/user_uart_tb.v b/verilog/dv/user_uart/user_uart_tb.v
index b4bfa74..ff9d152 100644
--- a/verilog/dv/user_uart/user_uart_tb.v
+++ b/verilog/dv/user_uart/user_uart_tb.v
@@ -72,11 +72,10 @@
`default_nettype wire
-`timescale 1 ns / 1 ns
+`timescale 1 ns/1 ps
-`include "uprj_netlists.v"
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
`include "uart_agent.v"
-`include "user_reg_map.v"
module user_uart_tb;
@@ -147,8 +146,7 @@
`ifdef WFDUMP
initial begin
$dumpfile("simx.vcd");
- $dumpvars(1, user_uart_tb);
- $dumpvars(0, user_uart_tb.u_top);
+ $dumpvars(0, user_uart_tb);
end
`endif
diff --git a/verilog/dv/user_uart_master/Makefile b/verilog/dv/user_uart_master/Makefile
index 4e61e77..7f9bc7b 100644
--- a/verilog/dv/user_uart_master/Makefile
+++ b/verilog/dv/user_uart_master/Makefile
@@ -14,35 +14,31 @@
#
# SPDX-License-Identifier: Apache-2.0
-## Caravel Pointers
-CARAVEL_ROOT ?= ../../../caravel
-CARAVEL_PATH ?= $(CARAVEL_ROOT)
-CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
-CARAVEL_VERILOG_PATH = $(CARAVEL_PATH)/verilog
-CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
-CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
+# ---- Include Partitioned Makefiles ----
-## User Project Pointers
-UPRJ_VERILOG_PATH ?= ../../../verilog
-UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
-UPRJ_GL_PATH = $(UPRJ_VERILOG_PATH)/gl
-UPRJ_BEHAVIOURAL_MODELS = ../model
-UPRJ_BEHAVIOURAL_AGENTS = ../agents
-UPRJ_INCLUDE_PATH1 = $(UPRJ_RTL_PATH)/yifive/ycr2c/src/includes
-UPRJ_INCLUDE_PATH2 = $(UPRJ_RTL_PATH)/sdram_ctrl/src/defs
-UPRJ_INCLUDE_PATH3 = $(UPRJ_RTL_PATH)/i2cm/src/includes
-UPRJ_INCLUDE_PATH4 = $(UPRJ_RTL_PATH)/usb1_host/src/includes
-UPRJ_INCLUDE_PATH5 = $(UPRJ_RTL_PATH)/mbist/include
+CONFIG = caravel_user_project
+
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+DESIGNS?=../../..
+
+export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(UPRJ_VERILOG_PATH)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
+GCC64_PREFIX?=riscv64-unknown-elf
## Simulation mode: RTL/GL
SIM?=RTL
DUMP?=OFF
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
.SUFFIXES:
PATTERN = user_uart_master
@@ -55,27 +51,17 @@
%.vvp: %_tb.v
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
else
- iverilog -g2005-sv -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
else
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) -I $(CARAVEL_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_GL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
diff --git a/verilog/dv/user_uart_master/user_uart_master_tb.v b/verilog/dv/user_uart_master/user_uart_master_tb.v
index 3f4f16e..40d7b07 100644
--- a/verilog/dv/user_uart_master/user_uart_master_tb.v
+++ b/verilog/dv/user_uart_master/user_uart_master_tb.v
@@ -64,17 +64,10 @@
`default_nettype wire
-`timescale 1 ns / 1 ns
+`timescale 1 ns / 1 ps
-`include "uprj_netlists.v"
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
`include "uart_agent.v"
-`include "user_reg_map.v"
-
-
-
-`define ADDR_SPACE_UART 32'h3001_0000
-`define ADDR_SPACE_PINMUX 32'h3002_0000
-
module user_uart_master_tb;
diff --git a/verilog/dv/user_usb/Makefile b/verilog/dv/user_usb/Makefile
index 3e082d3..a25bc69 100644
--- a/verilog/dv/user_usb/Makefile
+++ b/verilog/dv/user_usb/Makefile
@@ -14,42 +14,32 @@
#
# SPDX-License-Identifier: Apache-2.0
-## Caravel Pointers
-CARAVEL_ROOT ?= ../../../caravel
-CARAVEL_PATH ?= $(CARAVEL_ROOT)
-CARAVEL_FIRMWARE_PATH = $(CARAVEL_PATH)/verilog/dv/caravel
-CARAVEL_VERILOG_PATH = $(CARAVEL_PATH)/verilog
-CARAVEL_RTL_PATH = $(CARAVEL_VERILOG_PATH)/rtl
-CARAVEL_BEHAVIOURAL_MODELS = $(CARAVEL_VERILOG_PATH)/dv/caravel
+# ---- Include Partitioned Makefiles ----
-## User Project Pointers
-UPRJ_VERILOG_PATH ?= ../../../verilog
-UPRJ_RTL_PATH = $(UPRJ_VERILOG_PATH)/rtl
-UPRJ_GL_PATH = $(UPRJ_VERILOG_PATH)/gl
-UPRJ_BEHAVIOURAL_MODELS = ../model
-UPRJ_BEHAVIOURAL_AGENTS = ../agents
-UPRJ_BEHAVIOURAL_BFM = ../bfm
-UPRJ_INCLUDE_PATH1 = $(UPRJ_RTL_PATH)/yifive/ycr2c/src/includes
-UPRJ_INCLUDE_PATH2 = $(UPRJ_RTL_PATH)/sdram_ctrl/src/defs
-UPRJ_INCLUDE_PATH3 = $(UPRJ_RTL_PATH)/i2cm/src/includes
-UPRJ_INCLUDE_PATH4 = $(UPRJ_RTL_PATH)/usb1_host/src/includes
-UPRJ_INCLUDE_PATH5 = $(UPRJ_RTL_PATH)/mbist/include
+CONFIG = caravel_user_project
+
+#######################################################################
+## Caravel Verilog for Integration Tests
+#######################################################################
+DESIGNS?=../../..
+
+export USER_PROJECT_VERILOG ?= $(DESIGNS)/verilog
## YIFIVE FIRMWARE
-YIFIVE_FIRMWARE_PATH = $(UPRJ_VERILOG_PATH)/dv/firmware
+YIFIVE_FIRMWARE_PATH = $(USER_PROJECT_VERILOG)/dv/firmware
GCC64_PREFIX?=riscv64-unknown-elf
-## RISCV GCC
-GCC_PATH?=/ef/apps/bin
-GCC_PREFIX?=riscv32-unknown-elf
-PDK_PATH?=/opt/pdk/sky130A
## Simulation mode: RTL/GL
SIM?=RTL
DUMP?=OFF
RISC_CORE?=0
+### To Enable IVERILOG FST DUMP
+export IVERILOG_DUMPER = fst
+
+
.SUFFIXES:
PATTERN = user_usb
@@ -62,36 +52,23 @@
%.vvp: %_tb.v
ifeq ($(SIM),RTL)
ifeq ($(DUMP),OFF)
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) -I $(UPRJ_BEHAVIOURAL_BFM) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
else
- iverilog -g2005-sv -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_RTL_PATH) -I $(UPRJ_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) -I $(UPRJ_BEHAVIOURAL_BFM) \
- -I $(UPRJ_INCLUDE_PATH1) -I $(UPRJ_INCLUDE_PATH2) -I $(UPRJ_INCLUDE_PATH3) \
- -I $(UPRJ_INCLUDE_PATH4) -I $(UPRJ_INCLUDE_PATH5) \
+ iverilog -g2012 -DWFDUMP -DFUNCTIONAL -DSIM -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
else
- iverilog -g2005-sv -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
- -I $(CARAVEL_BEHAVIOURAL_MODELS) -I $(CARAVEL_RTL_PATH) -I $(CARAVEL_VERILOG_PATH) \
- -I $(UPRJ_BEHAVIOURAL_MODELS) -I $(UPRJ_GL_PATH) \
- -I $(UPRJ_BEHAVIOURAL_AGENTS) \
+ iverilog -g2012 -DFUNCTIONAL -DSIM -DGL -I $(PDK_PATH) \
+ -f$(USER_PROJECT_VERILOG)/includes/includes.rtl.$(CONFIG) \
$< -o $@
endif
%.vcd: %.vvp
vvp $<
-%.hex:
- echo @"This is user boot test, noting to compile the mangment core code"
-
# ---- Clean ----
diff --git a/verilog/dv/user_usb/user_usb_tb.v b/verilog/dv/user_usb/user_usb_tb.v
index 96f1446..d2e37b4 100644
--- a/verilog/dv/user_usb/user_usb_tb.v
+++ b/verilog/dv/user_usb/user_usb_tb.v
@@ -38,18 +38,18 @@
`default_nettype wire
-`timescale 1 ns / 1 ns
+`timescale 1 ns / 1 ps
`define TB_GLBL user_usb_tb
`define USB_BFM u_usb_agent
-`include "user_reg_map.v"
-`include "uprj_netlists.v"
`include "usb_agents.v"
`include "test_control.v"
`include "usb1d_defines.v"
`include "usbd_files.v"
+`include "sram_macros/sky130_sram_2kbyte_1rw1r_32x512_8.v"
+
module user_usb_tb;
parameter USB_HPER = 10.4167; // 48Mhz Half cycle
diff --git a/verilog/dv/wb_port/Makefile b/verilog/dv/wb_port/Makefile
index 887f270..633a369 100644
--- a/verilog/dv/wb_port/Makefile
+++ b/verilog/dv/wb_port/Makefile
@@ -21,6 +21,7 @@
# ---- Include Partitioned Makefiles ----
+DESIGNS?=../../..
CONFIG = caravel_user_project
########################################################
@@ -50,7 +51,7 @@
#######################################################################
export GCC_PATH?= $(TOOLS)/bin
-export GCC_PREFIX?= riscv32-unknown-linux-gnu
+export GCC_PREFIX?= riscv64-unknown-linux-gnu
@@ -121,7 +122,7 @@
# Comiple firmeware
##############################################################################
%.elf: %.c $(LINKER_SCRIPT) $(SOURCE_FILES)
- ${GCC_PATH}/${GCC_PREFIX}-gcc -g \
+ ${GCC_PREFIX}-gcc -g \
-I$(FIRMWARE_PATH) \
-I$(VERILOG_PATH)/dv/generated \
-I$(VERILOG_PATH)/dv/ \
@@ -131,15 +132,15 @@
-ffreestanding -nostdlib -o $@ $(SOURCE_FILES) $<
%.lst: %.elf
- ${GCC_PATH}/${GCC_PREFIX}-objdump -d -S $< > $@
+ ${GCC_PREFIX}-objdump -d -S $< > $@
%.hex: %.elf
- ${GCC_PATH}/${GCC_PREFIX}-objcopy -O verilog $< $@
+ ${GCC_PREFIX}-objcopy -O verilog $< $@
# to fix flash base address
sed -ie 's/@10/@00/g' $@
%.bin: %.elf
- ${GCC_PATH}/${GCC_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
+ ${GCC_PREFIX}-objcopy -O binary $< /dev/stdout | tail -c +1048577 > $@
##############################################################################
@@ -204,8 +205,8 @@
ifeq (,$(wildcard $(PDK_ROOT)/sky130A))
$(error $(PDK_ROOT)/sky130A not found, please install pdk before running make)
endif
-ifeq (,$(wildcard $(GCC_PATH)/$(GCC_PREFIX)-gcc ))
- $(error $(GCC_PATH)/$(GCC_PREFIX)-gcc is not found, please export GCC_PATH and GCC_PREFIX before running make)
+ifeq (,$(wildcard $(GCC_PREFIX)-gcc ))
+ $(error $(GCC_PREFIX)-gcc is not found, please export GCC_PATH and GCC_PREFIX before running make)
endif
# check for efabless style installation
ifeq (,$(wildcard $(PDK_ROOT)/sky130A/libs.ref/*/verilog))
diff --git a/verilog/dv/wb_port/wb_port.c b/verilog/dv/wb_port/wb_port.c
index 910e933..d3d63fe 100644
--- a/verilog/dv/wb_port/wb_port.c
+++ b/verilog/dv/wb_port/wb_port.c
@@ -87,7 +87,7 @@
reg_mprj_xfer = 1;
while (reg_mprj_xfer == 1);
- reg_la2_oenb = reg_la2_iena = 0xFFFFFFFF; // [95:64]
+ reg_la0_oenb = reg_la0_iena = 0xFFFFFFFF; // [31:0]
reg_la0_data = 0x000;
reg_la0_data = 0x001; // Remove Soft Reset
