commit | 29fe74b82fc546b4f57bf3bdfc7b1491040edd81 | [log] [tgz] |
---|---|---|
author | Kesami Hagiwara <kesami.hagiwara@swhwc.com> | Tue Aug 30 20:49:26 2022 +0900 |
committer | Kesami Hagiwara <kesami.hagiwara@swhwc.com> | Tue Aug 30 20:49:26 2022 +0900 |
tree | 9b87d93573bd17439c19c470f9d8718d7cf6363f | |
parent | 3d7fbd5cd53ba014f04f6449541b8118b1589b30 [diff] |
Use verilog/rtl/marmot_gl/Marmot_gl.v
A custom microcomputer design is useful when off-the-shelf general-purpose microcontrollers fail to meet the system needs. The rocket SoC generator automatically generate an SoC. It circumvents labor-intensive, error-prone, top-level SoC design.
The Rocket SoC Generator and Caravel SoC Template are reused to create a twin (not identical) RISC-V SoC consisting of one Rocket RISC-V and one Caravel RISC-V. The objectives here is to save hours on design verification and reduce power consumption rather than saving die area or chip cost.
graph TD A(A SoC Wish List) -- SoC Description in Chisel--> B B[The Rocket SoC Generator] --SoC RTL--> D[The OpenLane Flow] C[Caravel SoC Harness] --Harness RTL--> D B --FPGA RTL--> L P[RISC-V IDE Tools]--Code and Executables-->H L[_Yosys_+nextpnr] --Bitstream--> K[Lattice ECP5 Eval Board] E(Caravel Firmware) --Init, Monitoring, Debug--> C D --Sky130 GDS II Layout Data--> F[eFabless MPW] O[Xschema]--Circuit schematics-->J F --MPW Chips--> H F --MPW Chips--> I I[Caravel EVB] --Breadboarding-->H{User system} J[KiCad]--Gerber and BOM-->H
The following shows a scheme to manage clock, reset, power and low power state.
sequenceDiagram Note right of System: Powers<br/>Caravel<br/>Chip. System -->> Harness: Reset System -->> Harness: Reset System -->> Caravel SoC: Reset Harness -->> Caravel SoC: core clock Harness -->> Caravel SoC: core reset Caravel SoC->>Harness: Configuration of clk, DLL Caravel SoC->>Harness: Configure pad data routing and GPIO Harness-->>Rocket SoC: Set user_clock full speed Caravel SoC->>Rocket SoC: Reset user logic Note left of Rocket SoC: Rocket boots<br/>from ROM logic<br/>XIP SPI flash<br/>runs on DTIM. Rocket SoC -->> Caravel SoC: Rocket is running OK Note left of Caravel SoC: Acknoleging <br/>Rocket OK<br/>tuns off External<br/>CPG power<br/>via GPIO or I2C. Caravel SoC->>System: Turn off External CPG Power Note left of Rocket SoC: Rocket sends message<br/>"Bring Caravel<br/>to lowest power state"<br/>e.g. wishbone mailbox<br/>and interrupt. Rocket SoC->>Caravel SoC: "Go low on power" Note left of Caravel SoC: Management SoC sets<br/>Clocking and DLL<br/> to Caravel's<br/>lowest power state<br/>via System control. Caravel SoC->> Harness: Caravel goes low power. Note left of Rocket SoC: Rocket gets<br/>wake up signal<br/>from RTC. Rocket SoC->>Caravel SoC: "Go full power" Caravel SoC->>Harness: Configure Clock, DLL via System control Caravel SoC->>Rocket SoC: "Went full power".
Peripheral | Units | Pins / unit | Total pins | Muxed with GPIO | Note |
---|---|---|---|---|---|
Clock | 1 | 1 | 0 | - | From mgmt.SoC |
Reset | 1 | 1 | 0 | - | From mgmt.SoC |
QSPI 0 (XIP) | 1 | 6 | 6 | No | For Flash |
QSPI 1 (no XIP) | 1 | 7 | 7 | Yes | For ADC, etc. (CS x2) |
QSPI 2 (XIP) | 1 | 6 | 6 | No | For PSRAM |
UART 0 | 1 | 2 | 2 | No | |
UART 1-4 | 4 | 2 | 8 | Yes | |
I2C 0-1 | 2 | 2 | 4 | Yes | |
JTAG | 1 | 4 | 4 | No | |
Total | 37 | Max. 38 |
Caravel mprj_io[#] | Caravel Mgmt. SoC | Marmot IOF0 | Marmot GPIO |
---|---|---|---|
0 | JTAG | - | - |
1 | SDO | TDO | - |
2 | SDI | TDI | - |
3 | CSB | TMS | - |
4 | SCK | TCK | - |
5 | ser_rx | uart0_rx | - |
6 | ser_tx | uart0_tx | - |
7 | irq | spi1_csb[1] | gpio[24] |
8 | flash2_csb | spi0_flash_csb | - |
9 | flash2_sck | spi0_flash_sck | - |
10 | flash2_io[0] | spi0_flash_io[0] | - |
11 | flash2_io[1] | spi0_flash_io[1] | - |
12 | - | spi0_flash_io[2] | - |
13 | - | spi0_flash_io[3] | - |
14 | - | spi1_csb[0] | gpio[0] |
15 | - | spi1_sck | gpio[1] |
16 | - | spi1_io[0] | gpio[2] |
17 | - | spi1_io[1] | gpio[3] |
18 | - | spi1_io[2] | gpio[4] |
19 | - | spi1_io[3] | gpio[5] |
20 | - | spi2_csb | - |
21 | - | spi2_sck | - |
22 | - | spi2_io[0] | - |
23 | - | spi2_io[1] | - |
24 | - | spi2_io[2] | - |
25 | - | spi2_io[3] | - |
26 | - | i2c0_sda | gpio[12] |
27 | - | i2c0_scl | gpio[13] |
28 | - | i2c1_sda | gpio[14] |
29 | - | i2c1_scl | gpio[15] |
30 | - | uart1_rx | gpio[16] |
31 | - | uart1_tx | gpio[17] |
32 | - | uart2_rx | gpio[18] |
33 | - | uart2_tx | gpio[19] |
34 | - | uart3_rx | gpio[20] |
35 | - | uart3_tx | gpio[21] |
36 | - | uart4_rx | gpio[22] |
37 | - | uart4_tx | gpio[23] |
Base | Top | Attribute | Description | Notes |
---|---|---|---|---|
0x0000_0000 | 0x0000_0FFF | RWX A | Debug | Debug Address Space |
0x0000_1000 | 0x0000_2FFF | Reserved | On-Chip Non Volatile Memory | |
0x0000_3000 | 0x0000_3FFF | RWX A | Error Device | On-Chip Non Volatile Memory |
0x0000_4000 | 0x0000_FFFF | Reserved | On-Chip Non Volatile Memory | |
0x0001_0000 | 0x0001_1FFF | R XC | Mask ROM (8 KiB) | On-Chip Non Volatile Memory |
0x0001_2000 | 0x0002_1FFF | Reserved | On-Chip Non Volatile Memory | |
0x0200_0000 | 0x0200_FFFF | RW A | CLINT | On-Chip Peripherals |
0x0201_0000 | 0x07FF_FFFF | Reserved | On-Chip Peripherals | |
0x0800_0000 | 0x0800_1FFF | RWX A | ITIM (8 KiB) | On-Chip Volatile Memory |
0x0800_2000 | 0x0BFF_FFFF | Reserved | On-Chip Volatile Memory | |
0x0C00_0000 | 0x0FFF_FFFF | RW A | PLIC | On-Chip Peripherals |
0x1000_0000 | 0x1000_0FFF | RW A | AON | On-Chip Peripherals |
0x1000_1000 | 0x1001_1FFF | Reserved | On-Chip Peripherals | |
0x1001_2000 | 0x1001_2FFF | RW A | GPlO | On-Chip Peripherals |
0x1001_3000 | 0x1001_3FFF | RW A | UART 0 | On-Chip Peripherals |
0x1001_4000 | 0x1001_4FFF | RW A | QSPI 0 | On-Chip Peripherals |
0x1001_5000 | 0x1001_5FFF | Reserved | On-Chip Peripherals | |
0x1001_6000 | 0x1001_6FFF | RW A | I2C 0 | On-Chip Peripherals |
0x1001_7000 | 0x1002_2FFF | Reserved | On-Chip Peripherals | |
0x1002_3000 | 0x1002_3FFF | RW A | UART 1 | On-Chip Peripherals |
0x1002_4000 | 0x1002_4FFF | RW A | QSPI 1 | On-Chip Peripherals |
0x1002_5000 | 0x1002_5FFF | Reserved | On-Chip Peripherals | |
0x1002_6000 | 0x1002_6FFF | RW A | I2C 1 | On-Chip Peripherals |
0x1002_7000 | 0x1003_2FFF | Reserved | On-Chip Peripherals | |
0x1003_3000 | 0x1003_3FFF | RW A | UART 2 | On-Chip Peripherals |
0x1003_4000 | 0x1003_4FFF | RW A | QSPI 2 | On-Chip Peripherals |
0x1003_5000 | 0x1FFF_FFFF | Reserved | On-Chip Peripherals | |
0x1004_3000 | 0x1005_2FFF | RW A | UART3 | On-Chip Peripherals |
0x1004_4000 | 0x1005_2FFF | Reserved | On-Chip Peripherals | |
0x1005_3000 | 0x1005_3FFF | RW A | UART 4 | On-Chip Peripherals |
0x1005_4000 | 0x1FFF_FFFF | Reserved | On-Chip Peripherals | |
0x2000_0000 | 0x3FFF_FFFF | R XC | QSPI 0 Flash (512 MiB) | Off-Chip Non-Volatile Memory |
0x4000_0000 | 0x5FFF_FFFF | RWX A | QSPI 2 PSRAM (512 MiB) | Off-Chip Volatile Memory |
0x6000_0000 | 0x7FFF_FFFF | Reserved | Off-Chip Memory | |
0x8000_0000 | 0x8000_3FFF | Reserved | On-Chip Volatile Memory | |
0x8000_4000 | 0xFFFF_FFFF | Reserved | On-Chip Volatile Memory |
Freedom E300 Arty FPGA Dev Kit https://github.com/sifive/freedom#freedom-e300-arty-fpga-dev-kit
Freedom E310-G002 Manual https://sifive.cdn.prismic.io/sifive/b56b304f-cd2d-421b-9c14-6b35c33f172e_fe310-g002-manual-v1p4.pdf
Krste Asanović, Rimas Avižienis, Jonathan Bachrach, Scott Beamer, David Biancolin, Christopher Celio, Henry Cook, Palmer Dabbelt, John Hauser, Adam Izraelevitz, Sagar Karandikar, Benjamin Keller, Donggyu Kim, John Koenig, Yunsup Lee, Eric Love, Martin Maas, Albert Magyar, Howard Mao, Miquel Moreto, Albert Ou, David Patterson, Brian Richards, Colin Schmidt, Stephen Twigg, Huy Vo, and Andrew Waterman, The Rocket Chip Generator, Technical Report UCB/EECS-2016-17, EECS Department, University of California, Berkeley, April 2016
eFabless Caravel Architecture https://caravel-harness.readthedocs.io/en/latest/getting-started.html
This work is based on results obtained from project, JPNP16007, commissioned by The New Energy and Industrial Technology Development Organization (NEDO).