set fields in info.yaml
diff --git a/info.yaml b/info.yaml index 65e82e8..9d71706 100644 --- a/info.yaml +++ b/info.yaml
@@ -1,11 +1,11 @@ --- # TinyTapeout project information project: - wokwi_id: 334445762078310996 # If using wokwi, set this to your project's ID -# source_files: # If using an HDL, set wokwi_id as 0 and uncomment and list your source files here -# - verilog/rtl/counter.v -# - verilog/rtl/decoder.v -# top_module: "seven_segment_seconds" # put the name of your top module here, make it unique by prepending your github username + wokwi_id: 0 # If using wokwi, set this to your project's ID + source_files: # If using an HDL, set wokwi_id as 0 and uncomment and list your source files here + - verilog/rtl/xnor1.v + - verilog/rtl/top.v +# top_module: "rolfmobile99_top" # put the name of your top module here, make it unique by prepending your github username # As everyone will have access to all designs, try to make it easy for someone new to your design to know what # it does and how to operate it. @@ -14,33 +14,33 @@ # # This info will be automatically collected and used to make a datasheet for the chip. documentation: - author: "" # Your name + author: "Rolf Widenfelt" # Your name discord: "" # Your discord handle - make sure to include the # part as well - title: "" # Project title + title: "Collection of GF180 standard cells" # Project title description: "" # Short description of what your project does how_it_works: "" # Longer description of how the project works how_to_test: "" # Instructions on how someone could test your project, include things like what buttons do what and how to set the clock if needed external_hw: "" # Describe any external hardware needed - language: "wokwi" # other examples include Verilog, Amaranth, VHDL, etc + language: "verilog" # other examples include Verilog, Amaranth, VHDL, etc doc_link: "" # URL to longer form documentation, eg the README.md in your repository clock_hz: 0 # Clock frequency in Hz (if required) we are expecting max clock frequency to be ~6khz. Provided on input 0. picture: "" # relative path to a picture in your repository inputs: # a description of what the inputs do - clock - reset - - none - - none + - xnor_a + - xnor_b - none - none - none - none outputs: - - segment a # a description of what the outputs do - - segment b - - segment c - - segment d - - segment e - - segment f - - segment g + - xnor_y # output of XNOR gate + - none + - none + - none + - none + - none + - none - none
diff --git a/verilog/rtl/wokwi_diagram.json b/verilog/rtl/wokwi_diagram.json deleted file mode 100644 index 357c5bd..0000000 --- a/verilog/rtl/wokwi_diagram.json +++ /dev/null
@@ -1,167 +0,0 @@ -{ - "version": 1, - "author": "Uri Shaked", - "editor": "wokwi", - "parts": [ - { - "type": "wokwi-dip-switch-8", - "id": "sw1", - "top": 31.3, - "left": -45.8, - "rotate": 90, - "attrs": {} - }, - { "type": "wokwi-vcc", "id": "pwr1", "top": -124.04, "left": -134.4, "attrs": {} }, - { "type": "wokwi-gnd", "id": "gnd1", "top": 67.2, "left": 681, "attrs": {} }, - { "type": "wokwi-gate-and-2", "id": "gate1", "top": -211.2, "left": -96, "attrs": {} }, - { "type": "wokwi-gate-or-2", "id": "gate2", "top": -276.8, "left": 148.67, "attrs": {} }, - { "type": "wokwi-gate-xor-2", "id": "gate3", "top": -276.8, "left": 13.2, "attrs": {} }, - { "type": "wokwi-gate-nand-2", "id": "gate4", "top": 364.8, "left": 201.6, "attrs": {} }, - { "type": "wokwi-gate-not", "id": "gate5", "top": 393.6, "left": 96, "attrs": {} }, - { "type": "wokwi-gate-buffer", "id": "gate6", "top": -181.2, "left": 55.2, "attrs": {} }, - { "type": "wokwi-mux-2", "id": "mux1", "top": -67.2, "left": 86.4, "attrs": {} }, - { - "type": "wokwi-flip-flop-d", - "id": "flipflop1", - "top": -323.6, - "left": -244.13, - "attrs": {} - }, - { - "type": "wokwi-clock-generator", - "id": "clkgen1", - "top": -256.93, - "left": -250, - "attrs": {} - }, - { - "type": "wokwi-led-bar-graph", - "id": "bargraph1", - "top": -62.4, - "left": 600, - "attrs": { "color": "lime" } - }, - { "type": "wokwi-vcc", "id": "pwr2", "top": -124.04, "left": 57.6, "attrs": {} }, - { "type": "wokwi-vcc", "id": "pwr3", "top": -268.04, "left": -28.8, "attrs": {} }, - { "type": "wokwi-gnd", "id": "gnd2", "top": -18.71, "left": 76.2, "attrs": {} }, - { "type": "wokwi-mux-2", "id": "mux2", "top": -9.6, "left": 172.8, "attrs": {} }, - { "type": "wokwi-mux-2", "id": "mux3", "top": 57.6, "left": 240, "attrs": {} }, - { "type": "wokwi-mux-2", "id": "mux4", "top": 144, "left": 326.4, "attrs": {} }, - { "type": "wokwi-vcc", "id": "pwr4", "top": 19.96, "left": 230.4, "attrs": {} }, - { "type": "wokwi-vcc", "id": "pwr5", "top": 165.84, "left": 317, "rotate": 180, "attrs": {} }, - { "type": "wokwi-vcc", "id": "pwr6", "top": -37.64, "left": 163.2, "attrs": {} }, - { "type": "wokwi-gnd", "id": "gnd3", "top": 28.8, "left": 162.6, "attrs": {} }, - { "type": "wokwi-gnd", "id": "gnd4", "top": 96, "left": 229.8, "attrs": {} }, - { "type": "wokwi-gnd", "id": "gnd5", "top": 101, "left": 325.2, "rotate": 180, "attrs": {} }, - { - "type": "wokwi-dip-switch-8", - "id": "sw2", - "top": 342.76, - "left": -65.04, - "rotate": 90, - "attrs": {} - }, - { "type": "wokwi-vcc", "id": "pwr7", "top": 298.36, "left": -67.2, "attrs": {} }, - { "type": "wokwi-gate-and-2", "id": "gate7", "top": 326.4, "left": 96, "attrs": {} }, - { - "type": "wokwi-resistor", - "id": "r1", - "top": -27.98, - "left": 9.21, - "rotate": 90, - "attrs": { "value": "1000" } - }, - { - "type": "wokwi-gnd", - "id": "gnd7", - "top": -95.97, - "left": -1.54, - "rotate": 180, - "attrs": {} - }, - { - "type": "wokwi-resistor", - "id": "r2", - "top": 278.2, - "left": -2.2, - "rotate": 90, - "attrs": { "value": "1000" } - }, - { - "type": "wokwi-resistor", - "id": "r3", - "top": 278.2, - "left": 26.6, - "rotate": 90, - "attrs": { "value": "1000" } - }, - { - "type": "wokwi-resistor", - "id": "r4", - "top": 278.2, - "left": 55.4, - "rotate": 90, - "attrs": { "value": "1000" } - }, - { "type": "wokwi-gnd", "id": "gnd8", "top": 216.2, "left": 47.8, "rotate": 180, "attrs": {} } - ], - "connections": [ - [ "mux1:OUT", "bargraph1:A1", "green", [ "v0" ] ], - [ "pwr1:VCC", "sw1:1a", "red", [ "v0" ] ], - [ "pwr2:VCC", "mux1:A", "red", [ "v0" ] ], - [ "mux1:B", "gnd2:GND", "green", [ "h0" ] ], - [ "bargraph1:C1", "bargraph1:C2", "green", [ "v0" ] ], - [ "bargraph1:C2", "bargraph1:C3", "green", [ "h0" ] ], - [ "bargraph1:C3", "bargraph1:C4", "green", [ "h0" ] ], - [ "bargraph1:C4", "bargraph1:C5", "green", [ "h0" ] ], - [ "bargraph1:C5", "bargraph1:C6", "green", [ "h0" ] ], - [ "bargraph1:C6", "bargraph1:C7", "green", [ "h0" ] ], - [ "bargraph1:C7", "bargraph1:C8", "green", [ "h0" ] ], - [ "bargraph1:C8", "bargraph1:C9", "green", [ "h0" ] ], - [ "bargraph1:C10", "bargraph1:C9", "green", [ "h0" ] ], - [ "bargraph1:C10", "gnd1:GND", "green", [ "h0" ] ], - [ "sw1:1b", "mux1:SEL", "green", [ "h0" ] ], - [ "pwr6:VCC", "mux2:A", "red", [ "v0" ] ], - [ "gnd3:GND", "mux2:B", "black", [ "v0" ] ], - [ "pwr4:VCC", "mux3:A", "red", [ "v0" ] ], - [ "gnd4:GND", "mux3:B", "black", [ "v0" ] ], - [ "gnd5:GND", "mux4:A", "black", [ "v0" ] ], - [ "pwr5:VCC", "mux4:B", "red", [ "v0" ] ], - [ "sw1:1b", "mux2:SEL", "green", [ "h0" ] ], - [ "sw1:1b", "mux3:SEL", "green", [ "h0" ] ], - [ "sw1:1b", "mux4:SEL", "green", [ "h0" ] ], - [ "mux2:OUT", "bargraph1:A2", "green", [ "v0" ] ], - [ "mux3:OUT", "bargraph1:A3", "green", [ "v0" ] ], - [ "mux4:OUT", "bargraph1:A4", "green", [ "v0" ] ], - [ "pwr7:VCC", "sw2:1a", "red", [ "v0" ] ], - [ "sw1:1a", "sw1:2a", "green", [ "h0" ] ], - [ "sw1:2a", "sw1:3a", "green", [ "h0" ] ], - [ "sw2:1a", "sw2:2a", "green", [ "h0" ] ], - [ "sw2:2a", "sw2:3a", "green", [ "h0" ] ], - [ "sw2:3a", "sw2:4a", "green", [ "h0" ] ], - [ "sw2:4a", "sw2:5a", "green", [ "h0" ] ], - [ "sw2:5a", "sw2:6a", "green", [ "h0" ] ], - [ "sw2:6a", "sw2:7a", "green", [ "h0" ] ], - [ "sw2:7a", "sw2:8a", "green", [ "h0" ] ], - [ "sw2:1b", "gate7:A", "green", [ "h0" ] ], - [ "sw2:2b", "gate7:B", "green", [ "h0" ] ], - [ "sw2:3b", "gate5:IN", "green", [ "h0" ] ], - [ "gate5:OUT", "gate4:B", "green", [ "v0" ] ], - [ "gate7:OUT", "gate4:A", "green", [ "v0" ] ], - [ "r1:2", "sw1:1b", "green", [ "h1.74", "v16.62" ] ], - [ "gnd7:GND", "r1:1", "black", [ "v0" ] ], - [ "r2:1", "gnd8:GND", "green", [ "h0" ] ], - [ "r4:1", "r3:1", "green", [ "h0" ] ], - [ "r3:1", "r2:1", "green", [ "h0" ] ], - [ - "gate1:A", - "clkgen1:CLK", - "green", - [ "h0", "v-48", "h-28.8", "v67.2", "h-57.6", "v38.4", "h-28.8", "v-57.6", "h28.8" ] - ], - [ "r2:2", "sw2:1b", "green", [ "h-9.6", "v17.8" ] ], - [ "r3:2", "sw2:2b", "green", [ "h-9.6", "v27.4" ] ], - [ "r4:2", "sw2:3b", "green", [ "h-9.6", "v27.4" ] ], - [ "bargraph1:A8", "gate4:OUT", "green", [ "h-37.9", "v305.65", "h-269.3" ] ] - ] -} \ No newline at end of file