blob: c47500c8bfa3bc2f97529e3a020cefc36b0dbc28 [file] [log] [blame]
//======================================================================
//
// sha256.v
// --------
// Top level wrapper for the SHA-256 hash function providing
// a simple memory like interface with 32 bit data access.
//
//
// Author: Joachim Strombergson
// Copyright (c) 2013, 201, Secworks Sweden AB
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or
// without modification, are permitted provided that the following
// conditions are met:
//
// 1. Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================
`default_nettype none
module sha256(
// Clock and reset.
input wire clk,
input wire reset_n,
// Control.
input wire cs,
input wire we,
// Data ports.
input wire [7 : 0] address,
input wire [31 : 0] write_data,
output wire [31 : 0] read_data,
output wire error
);
//----------------------------------------------------------------
// Internal constant and parameter definitions.
//----------------------------------------------------------------
localparam ADDR_NAME0 = 8'h00;
localparam ADDR_NAME1 = 8'h01;
localparam ADDR_VERSION = 8'h02;
localparam ADDR_CTRL = 8'h08;
localparam CTRL_INIT_BIT = 0;
localparam CTRL_NEXT_BIT = 1;
localparam CTRL_MODE_BIT = 2;
localparam ADDR_STATUS = 8'h09;
localparam STATUS_READY_BIT = 0;
localparam STATUS_VALID_BIT = 1;
localparam ADDR_BLOCK0 = 8'h10;
localparam ADDR_BLOCK15 = 8'h1f;
localparam ADDR_DIGEST0 = 8'h20;
localparam ADDR_DIGEST7 = 8'h27;
localparam CORE_NAME0 = 32'h73686132; // "sha2"
localparam CORE_NAME1 = 32'h2d323536; // "-256"
localparam CORE_VERSION = 32'h312e3830; // "1.80"
localparam MODE_SHA_224 = 1'h0;
localparam MODE_SHA_256 = 1'h1;
//----------------------------------------------------------------
// Registers including update variables and write enable.
//----------------------------------------------------------------
reg init_reg;
reg init_new;
reg next_reg;
reg next_new;
reg mode_reg;
reg mode_new;
reg mode_we;
reg ready_reg;
reg [31 : 0] block_reg [0 : 15];
reg block_we;
reg [255 : 0] digest_reg;
reg digest_valid_reg;
//----------------------------------------------------------------
// Wires.
//----------------------------------------------------------------
wire core_ready;
wire [511 : 0] core_block;
wire [255 : 0] core_digest;
wire core_digest_valid;
reg [31 : 0] tmp_read_data;
reg tmp_error;
//----------------------------------------------------------------
// Concurrent connectivity for ports etc.
//----------------------------------------------------------------
assign core_block = {block_reg[00], block_reg[01], block_reg[02], block_reg[03],
block_reg[04], block_reg[05], block_reg[06], block_reg[07],
block_reg[08], block_reg[09], block_reg[10], block_reg[11],
block_reg[12], block_reg[13], block_reg[14], block_reg[15]};
assign read_data = tmp_read_data;
assign error = tmp_error;
//----------------------------------------------------------------
// core instantiation.
//----------------------------------------------------------------
sha256_core core(
.clk(clk),
.reset_n(reset_n),
.init(init_reg),
.next(next_reg),
.mode(mode_reg),
.block(core_block),
.ready(core_ready),
.digest(core_digest),
.digest_valid(core_digest_valid)
);
//----------------------------------------------------------------
// reg_update
//
// Update functionality for all registers in the core.
// All registers are positive edge triggered with asynchronous
// active low reset. All registers have write enable.
//----------------------------------------------------------------
always @ (posedge clk or negedge reset_n)
begin : reg_update
integer i;
if (!reset_n)
begin
for (i = 0 ; i < 16 ; i = i + 1)
block_reg[i] <= 32'h0;
init_reg <= 0;
next_reg <= 0;
ready_reg <= 0;
mode_reg <= MODE_SHA_256;
digest_reg <= 256'h0;
digest_valid_reg <= 0;
end
else
begin
ready_reg <= core_ready;
digest_valid_reg <= core_digest_valid;
init_reg <= init_new;
next_reg <= next_new;
if (mode_we)
mode_reg <= mode_new;
if (core_digest_valid)
digest_reg <= core_digest;
if (block_we)
block_reg[address[3 : 0]] <= write_data;
end
end // reg_update
//----------------------------------------------------------------
// api_logic
//
// Implementation of the api logic. If cs is enabled will either
// try to write to or read from the internal registers.
//----------------------------------------------------------------
always @*
begin : api_logic
init_new = 0;
next_new = 0;
mode_new = 0;
mode_we = 0;
block_we = 0;
tmp_read_data = 32'h0;
tmp_error = 0;
if (cs)
begin
if (we)
begin
if (address == ADDR_CTRL)
begin
init_new = write_data[CTRL_INIT_BIT];
next_new = write_data[CTRL_NEXT_BIT];
mode_new = write_data[CTRL_MODE_BIT];
mode_we = 1;
end
if ((address >= ADDR_BLOCK0) && (address <= ADDR_BLOCK15))
block_we = 1;
end // if (we)
else
begin
if ((address >= ADDR_BLOCK0) && (address <= ADDR_BLOCK15))
tmp_read_data = block_reg[address[3 : 0]];
if ((address >= ADDR_DIGEST0) && (address <= ADDR_DIGEST7))
tmp_read_data = digest_reg[(7 - (address - ADDR_DIGEST0)) * 32 +: 32];
case (address)
// Read operations.
ADDR_NAME0:
tmp_read_data = CORE_NAME0;
ADDR_NAME1:
tmp_read_data = CORE_NAME1;
ADDR_VERSION:
tmp_read_data = CORE_VERSION;
ADDR_CTRL:
tmp_read_data = {29'h0, mode_reg, next_reg, init_reg};
ADDR_STATUS:
tmp_read_data = {30'h0, digest_valid_reg, ready_reg};
default:
begin
end
endcase // case (address)
end
end
end // addr_decoder
endmodule // sha256
//======================================================================
// EOF sha256.v
//======================================================================