remove useless config.tcl
diff --git a/openlane/computer/config.tcl b/openlane/computer/config.tcl
deleted file mode 100644
index 2574945..0000000
--- a/openlane/computer/config.tcl
+++ /dev/null
@@ -1,78 +0,0 @@
-# Copyright 2022 cpu-dev
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-set ::env(PDK) "gf180mcuC"
-set ::env(STD_CELL_LIBRARY) "gf180mcu_fd_sc_mcu7t5v0"
-
-set script_dir [file dirname [file normalize [info script]]]
-
-set ::env(ROUTING_CORES) 16
-
-set ::env(DESIGN_NAME) computer
-
-set ::env(DESIGN_IS_CORE) 0
-set ::env(GLB_RT_MAXLAYER) 5
-set ::env(FP_PDN_CHECK_NODES) 0
-
-set ::env(VERILOG_FILES) "\
- $::env(CARAVEL_ROOT)/verilog/rtl/defines.v \
- $::env(DESIGN_DIR)/../../verilog/rtl/jacaranda-8/UART/UART.v \
- $::env(DESIGN_DIR)/../../verilog/rtl/jacaranda-8/UART/rx.v \
- $::env(DESIGN_DIR)/../../verilog/rtl/jacaranda-8/UART/tx.v \
- $::env(DESIGN_DIR)/../../verilog/rtl/jacaranda-8/alu.v \
- $::env(DESIGN_DIR)/../../verilog/rtl/jacaranda-8/cpu.v \
- $::env(DESIGN_DIR)/../../verilog/rtl/jacaranda-8/decoder.v \
- $::env(DESIGN_DIR)/../../verilog/rtl/jacaranda-8/alu_controller.v \
- $::env(DESIGN_DIR)/../../verilog/rtl/jacaranda-8/computer.v \
- $::env(DESIGN_DIR)/../../verilog/rtl/jacaranda-8/data_mem.v \
- $::env(DESIGN_DIR)/../../verilog/rtl/jacaranda-8/instr_mem.v \
- $::env(DESIGN_DIR)/../../verilog/rtl/jacaranda-8/main_controller.v \
- $::env(DESIGN_DIR)/../../verilog/rtl/jacaranda-8/regfile.v \
- $::env(DESIGN_DIR)/../../verilog/rtl/jacaranda-8/wishbone.v"
-
-#set ::env(EXTRA_GDS_FILES) "\
-# $::env(PDK_ROOT)open_pdks/sky130/custom/sky130_fd_sc_hd/gds/sky130_ef_sc_hd__decap_12.gds"
-
-#set ::env(EXTRA_LEFS) "\
-# $::env(PDK_ROOT)open_pdks/sky130/custom/sky130_fd_sc_hd/lef/sky130_ef_sc_hd__decap_12.lef"
-
-set ::env(CLOCK_PORT) wb_clk_i
-set ::env(CLOCK_NET) wb_clk_i
-set ::env(CLOCK_PERIOD) 500
-
-#set ::env(SYNTH_STRATEGY) "DELAY 2"
-
-set ::env(PL_TARGET_DENSITY) 0.40
-set ::env(FP_SIZING) absolute
-set ::env(DIE_AREA) "0 0 1500 1500"
-#set ::env(FP_CORE_UTIL) 6
-#set ::env(FP_SIZING) relative
-
-#set ::(DECAP_CELL) "sky130_ef_sc_hd__decap_12"
-
-set ::env(GLB_RESIZER_TIMING_OPTIMIZATIONS) 0
-set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) 1
-set ::env(PL_RESIZER_HOLD_SLACK_MARGIN) 0.2
-set ::env(PL_RESIZER_ALLOW_SETUP_VIOS) 1
-set ::env(QUIT_ON_HOLD_VIOLATIONS) 0
-#set ::env(GLB_RT_ADJUSTMENT) 0.30
-
-set ::env(FP_PIN_ORDER_CFG) $::env(DESIGN_DIR)/pin_order.cfg
-
-set ::env(VDD_NETS) [list {vccd1}]
-set ::env(GND_NETS) [list {vssd1}]
-
-set ::env(DIODE_INSERTION_STRATEGY) 4
-
-set ::env(RUN_CVC) 1
