tapeout/outputs/drc/caravel_18000abd_pres.lyrdb

<?xml version="1.0" encoding="utf-8"?>
<report-database>
 <description>DRC Run Report at</description>
 <original-file/>
 <generator>drc: script='/mnt/shuttles/shuttle/gfmpw-0/u463_russellf/gf180_russell/tapeout/outputs/drc/pres.drc'</generator>
 <top-cell>caravel_18000abd</top-cell>
 <tags>
 </tags>
 <categories>
  <category>
   <name>PRES.1</name>
   <description>PRES.1 : Minimum width of Poly2 resistor. : 0.8µm</description>
   <categories>
   </categories>
  </category>
  <category>
   <name>PRES.2</name>
   <description>PRES.2 : Minimum space between Poly2 resistors. : 0.4µm</description>
   <categories>
   </categories>
  </category>
  <category>
   <name>PRES.3</name>
   <description>PRES.3 : Minimum space from Poly2 resistor to COMP.</description>
   <categories>
   </categories>
  </category>
  <category>
   <name>PRES.4</name>
   <description>PRES.4 : Minimum space from Poly2 resistor to unrelated Poly2. : 0.6µm</description>
   <categories>
   </categories>
  </category>
  <category>
   <name>PRES.5</name>
   <description>PRES.5 : Minimum Plus implant overlap of Poly2 resistor. : 0.3µm</description>
   <categories>
   </categories>
  </category>
  <category>
   <name>PRES.6</name>
   <description>PRES.6 : Minimum salicide block overlap of Poly2 resistor in width direction. : 0.28µm</description>
   <categories>
   </categories>
  </category>
  <category>
   <name>PRES.7</name>
   <description>PRES.7 : Space from salicide block to contact on Poly2 resistor.</description>
   <categories>
   </categories>
  </category>
  <category>
   <name>PRES.9a</name>
   <description>PRES.9a : Pplus Poly2 resistor shall be covered by RES_MK marking. RES_MK length shall be coincide with resistor length (Defined by SAB length) and width covering the width of Poly2.</description>
   <categories>
   </categories>
  </category>
  <category>
   <name>PRES.9b</name>
   <description>PRES.9b : If the size of single RES_MK mark layer is greater than 15000um2 and both side (X and Y) are greater than 80um. then the minimum spacing to adjacent RES_MK layer. : 20µm</description>
   <categories>
   </categories>
  </category>
 </categories>
 <cells>
  <cell>
   <name>caravel_18000abd</name>
   <variant/>
   <references>
   </references>
  </cell>
 </cells>
 <items>
 </items>
</report-database>