docs: update info.yaml
diff --git a/info.yaml b/info.yaml index a597d9e..e3fde44 100644 --- a/info.yaml +++ b/info.yaml
@@ -1,11 +1,26 @@ --- # TinyTapeout project information project: - wokwi_id: 334445762078310996 # If using wokwi, set this to your project's ID -# source_files: # If using an HDL, set wokwi_id as 0 and uncomment and list your source files here. Source files must be in ./src -# - counter.v -# - decoder.v -# top_module: "seven_segment_seconds" # put the name of your top module here, make it unique by prepending your github username + wokwi_id: 0 # If using wokwi, set this to your project's ID + source_files: # If using an HDL, set wokwi_id as 0 and uncomment and list your source files here. Source files must be in ./src + - rtl/top.v + - rtl/scanchain.v + - rtl/wb_mux.v + - blocks/serv/rtl/serv_top.v + - blocks/serv/rtl/serv_mem_if.v + - blocks/serv/rtl/serv_rf_if.v + - blocks/serv/rtl/serv_alu.v + - blocks/serv/rtl/serv_ctrl.v + - blocks/serv/rtl/serv_bufreg2.v + - blocks/serv/rtl/serv_bufreg.v + - blocks/serv/rtl/serv_immdec.v + - blocks/serv/rtl/serv_decode.v + - blocks/serv/rtl/serv_state.v + - blocks/serv/rtl/serv_csr.v + - blocks/serv/servant/servant_arbiter.v + - blocks/serv/servant/servant_mux.v + - blocks/serv/servant/servant_gpio.v + top_module: "gregdavill_serv_top" # put the name of your top module here, make it unique by prepending your github username # As everyone will have access to all designs, try to make it easy for someone new to your design to know what # it does and how to operate it. @@ -14,17 +29,17 @@ # # This info will be automatically collected and used to make a datasheet for the chip. documentation: - author: "" # Your name - discord: "" # Your discord handle - make sure to include the # part as well - title: "" # Project title - description: "" # Short description of what your project does - how_it_works: "" # Longer description of how the project works - how_to_test: "" # Instructions on how someone could test your project, include things like what buttons do what and how to set the clock if needed - external_hw: "" # Describe any external hardware needed - language: "wokwi" # other examples include Verilog, Amaranth, VHDL, etc - doc_link: "" # URL to longer form documentation, eg the README.md in your repository + author: "Greg Davill" # Your name + discord: "Greg#9468" # Your discord handle - make sure to include the # part as well + title: "serv" # Project title + description: "An award winning RISCV CPU!" # Short description of what your project does + how_it_works: "tbd" # Longer description of how the project works + how_to_test: "tbd" # Instructions on how someone could test your project, include things like what buttons do what and how to set the clock if needed + external_hw: "tbd" # Describe any external hardware needed + language: "verilog" # other examples include Verilog, Amaranth, VHDL, etc + doc_link: "tbd" # URL to longer form documentation, eg the README.md in your repository clock_hz: 0 # Clock frequency in Hz (if required) we are expecting max clock frequency to be ~6khz. Provided on input 0. - picture: "" # relative path to a picture in your repository + picture: "tbd" # relative path to a picture in your repository inputs: # a description of what the inputs do - clock - reset