Put back the gf180mcu device generator routines that got deleted
due to my bad instructions.
diff --git a/gf180mcu/magic/gf180mcu.tcl b/gf180mcu/magic/gf180mcu.tcl
index aa68e78..f01cace 100644
--- a/gf180mcu/magic/gf180mcu.tcl
+++ b/gf180mcu/magic/gf180mcu.tcl
@@ -665,7 +665,7 @@
return {w 0.45 l 0.45 area 0.2025 peri 1.8 \
nx 1 ny 1 dummy 0 lmin 0.45 wmin 0.45 \
elc 1 erc 1 etc 1 ebc 1 doverlap 0 full_metal 1 \
- compatible {diode_nd2ps_03v3 diode_nd2ps_06v0 diode_nd2ps_06v0}}
+ compatible {diode_nd2ps_03v3 diode_nd2ps_06v0}}
}
proc gf180mcu::diode_pd2nw_03v3_defaults {} {
@@ -676,6 +676,13 @@
compatible {diode_pd2nw_03v3 diode_pd2nw_06v0}}
}
+proc gf180mcu::diode_nd2ps_06v0_defaults {} {
+ return {w 0.45 l 0.45 area 0.2025 peri 1.8 \
+ nx 1 ny 1 dummy 0 lmin 0.45 wmin 0.45 \
+ elc 1 erc 1 etc 1 ebc 1 doverlap 0 \
+ full_metal 1 \
+ compatible {diode_nd2ps_03v3 diode_nd2ps_06v0}}
+}
proc gf180mcu::diode_pd2nw_06v0_defaults {} {
return {w 0.45 l 0.45 area 0.2025 peri 1.8 \
@@ -695,6 +702,9 @@
return [gf180mcu::diode_convert $parameters]
}
+proc gf180mcu::diode_nd2ps_06v0_convert {parameters} {
+ return [gf180mcu::diode_convert $parameters]
+}
proc gf180mcu::diode_pd2nw_06v0_convert {parameters} {
return [gf180mcu::diode_convert $parameters]
@@ -710,6 +720,10 @@
gf180mcu::diode_dialog diode_pd2nw_03v3 $parameters
}
+proc gf180mcu::diode_nd2ps_06v0_dialog {parameters} {
+ gf180mcu::diode_dialog diode_nd2ps_06v0 $parameters
+}
+
proc gf180mcu::diode_pd2nw_06v0_dialog {parameters} {
gf180mcu::diode_dialog diode_pd2nw_06v0 $parameters
}
@@ -724,6 +738,10 @@
gf180mcu::diode_check $parameters
}
+proc gf180mcu::diode_nd2ps_06v0_check {parameters} {
+ gf180mcu::diode_check $parameters
+}
+
proc gf180mcu::diode_pd2nw_06v0_check {parameters} {
gf180mcu::diode_check $parameters
}
@@ -956,7 +974,30 @@
#----------------------------------------------------------------
-#----------------------------------------------------------------
+proc gf180mcu::diode_nd2ps_06v0_draw {parameters} {
+
+ # Set a local variable for each rule in ruleset
+ foreach key [dict keys $gf180mcu::ruleset] {
+ set $key [dict get $gf180mcu::ruleset $key]
+ }
+
+ set newdict [dict create \
+ diff_poly_space 0.30 \
+ diff_gate_space 0.30 \
+ diff_spacing 0.36 \
+ dev_type mvndiode \
+ dev_contact_type mvndic \
+ end_type mvpsd \
+ end_contact_type mvpsc \
+ end_sub_type pwell \
+ dev_spacing 0.25 \
+ dev_surround ${diff_surround} \
+ end_spacing 0.36 \
+ end_surround ${diff_surround} \
+ ]
+ set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
+ return [gf180mcu::diode_draw $drawdict]
+}
#----------------------------------------------------------------
