Corrected the area parameter passed to the bipolar devices in the
magic techfile, matching an update to magic to correct the area
output for terminals other than the device identifier.
diff --git a/VERSION b/VERSION
index ffcbe71..28dff43 100644
--- a/VERSION
+++ b/VERSION
@@ -1 +1 @@
-1.0.34
+1.0.35
diff --git a/sky130/magic/sky130.tech b/sky130/magic/sky130.tech
index 994e000..4aeedaf 100644
--- a/sky130/magic/sky130.tech
+++ b/sky130/magic/sky130.tech
@@ -5930,8 +5930,8 @@
device msubcircuit sky130_fd_pr__nfet_05v0_nvt mvnnfet \
*mvndiff,mvndiffres *mvndiff,mvndiffres pwell,space/w error l=l w=w
- device msubcircuit sky130_fd_pr__npn_05v0 npn dnwell *ndiff space/w error a1=area
- device msubcircuit sky130_fd_pr__pnp_05v0 pnp pwell,space/w *pdiff a1=area
+ device msubcircuit sky130_fd_pr__npn_05v0 npn dnwell *ndiff space/w error a2=area
+ device msubcircuit sky130_fd_pr__pnp_05v0 pnp pwell,space/w *pdiff a2=area
device rsubcircuit sky130_fd_pr__res_generic_po rmp \
*poly space/w,pwell,nwell error l=l w=w
@@ -6010,8 +6010,10 @@
pwell,space/w a=area
#ifdef MIM
- device subcircuit sky130_fd_pr__cap_mim_m3_1 *mimcap m3 nwell,pwell,space/w error a=area s=subs
- device subcircuit sky130_fd_pr__cap_mim_m3_2 *mimcap2 m4,mimcc/m4 nwell,pwell,space/w error a=area s=subs
+ device subcircuit sky130_fd_pr__cap_mim_m3_1 *mimcap m3 \
+ nwell,pwell,space/w error w=w l=l
+ device subcircuit sky130_fd_pr__cap_mim_m3_2 *mimcap2 m4,mimcc/m4 \
+ nwell,pwell,space/w error w=w l=l
#endif (MIM)
variants (orig)
@@ -6086,8 +6088,8 @@
device pdiode sky130_fd_pr__diode_pd2nw_05v5_hvt *pdiodehvt nwell a=area
device ndiode sky130_fd_pr__diode_pw2nd_05v5_nvt *nndiode pwell,space/w a=area
- device bjt sky130_fd_pr__npn_05v5 npn dnwell *ndiff space/w error a1=area
- device bjt sky130_fd_pr__pnp_05v5 pnp pwell,space/w *pdiff a1=area
+ device bjt sky130_fd_pr__npn_05v5 npn dnwell *ndiff space/w error a2=area
+ device bjt sky130_fd_pr__pnp_05v5 pnp pwell,space/w *pdiff a2=area
#ifdef MIM
device capacitor sky130_fd_pr__cap_mim_m3_1 *mimcap *m3 1
