blob: cc337dd668c821a416e83b0cf47066fe957574e0 [file] [log] [blame]
# Makefile for efabless design kits for SkyWater Sky130:
#
# sky130A = 5-metal backend stack with dual MiM
#
# Written by Tim Edwards March 2019
# efabless corporation
# updated October 2019
# updated December 2019 (divide installation sections for individual tools)
# updated March 2020 (refactored the install process)
# updated May 2020 (changed to new process name Sky130)
#
# Instructions:
#
# Run "configure" from the top level directory. Use the following
# configuration options to match your environment:
#
# --with-sky130-source-path=<path>
# where <path> is the location of the Google/Skywater repository
# cloned from https://github.com/google/skywater-pdk. This
# option is mandatory and has no default.
#
# --with-sky130-local-path=<path>
# where <path> is the run-time location of the installed PDK
# files generated by open_pdks. This option is mandatory and
# has no default.
#
# --with-sky130-dist-path=<path>
# where <path> is the install-time location of the installed
# PDK files generated by open_pdks, with the expectation that
# <path> is something like a git repository that is then
# distributed across a system. If this option is not specified,
# then files are installed to the local path.
#
# --with-sky130-link-targets=<value>
# where <value> is one of "none" or "source". If set to "source",
# then where possible, the installed files are symbolic links
# back to the source, rather than copies of the source. The
# default value is "none" if the option is not specified.
#
# --with-ef-style
# If specified, then the installation uses the efabless style,
# which swaps the file hierarchy of file formats vs. IP libraries;
# e.g., "gds/sky130_fd_sc_hd/" with ef-style, vs.
# "sky130_fd_sc_hd/gds/" without it.
#
# The variables below are substituted from the configuration options:
#
# SKYWATER_PATH: points to vendor sources
# EF_STYLE: 1 for efabless style, 0 otherwise
# LINK_TARGETS: link back to source or link to 1st PDK when possible
# DIST_PATH: install location for distributed install
# LOCAL_PATH: install location for local install or runtime location
# for distributed install
#
# Run "make" to stage the PDK for tool setup and vendor libraries
#
# Run "make install" to install all staged files. The installation is
# either local or distributed, depending on whether --with-sky130-dist-path
# has been set when running configure.
#
# Run "make clean" to remove all staging files.
#
# Run "make veryclean" to remove all staging and install log files.
#
# For the sake of simplicity, the "standard" installation can be done
# with the usual
#
# make
# make install
# make clean
#
#--------------------------------------------------------------------
# This Makefile contains bash-isms
SHELL = bash
REVISION = 20200508
TECH = sky130
# If EF_STYLE is set to 1, then efabless naming conventions are
# used, otherwise the generic naming conventions are used.
# Mainly, the hierarchy of library names and file types is reversed
# (e.g., sky130_fd_sc_hd/lef vs. lef/sky130_fd_sc_hd).
# EF_STYLE = 0 | 1
EF_STYLE = @EF_STYLE@
# Normally it's fine to keep the staging path in a local directory,
# although /tmp or a dedicated staging area are also fine, as long
# as the install process can write to the path.
STAGING_PATH = `pwd`
# If LINK_TARGETS is set to "none", then files are copied
# from the SkyWater sources to the target. If set to "source",
# symbolic links are made in the target directories pointing
# back to the SkyWater sources. If set to the name of another
# PDK (e.g, "sky130A"), then symbolic links are made to the
# same files in that PDK, where they exist, and are copied
# from source, where they don't.
# LINK_TARGETS = source | none | sky130A
LINK_TARGETS = @SKY130_LINK_TARGETS@
# Paths:
# Path to skywater_pdk (to be changed to public repo; work in progress)
# Version below comes from foss-eda-tools.googlesource.com
# SKYWATER_PATH = ~/gits/skywater-pdk-scratch/skywater-pdk/libraries
# Version below is also from foss-eda-tools and is more recent than
# the scratch repo above.
SKYWATER_PATH = @SKY130_SOURCE_PATH@
# Path to OSU standard cell library sources (to be added to configuration options).
OSU_PATH = ~/gits/osu_130_pdk
# NOTE: Install destination is the git repository of the technology platform.
# Once updated in git, the git project can be distributed to all hosts.
#
ifeq (${EF_STYLE}, 1)
LOCAL_PATH = @SKY130_LOCAL_PATH@
CONFIG_DIR = .ef-config
REV_DIR = ${REVISION}
else
# LOCAL_PATH = /usr/local/share/vlsi/SkyWater
LOCAL_PATH = @SKY130_LOCAL_PATH@
CONFIG_DIR = .config
REV_DIR = .
endif
# DIST_PATH = ~/gits/ef-skywater-${TECH}
DIST_PATH = @SKY130_DIST_PATH@
# EF process nodes created from the master sources
SKY130A = sky130A
ifeq (${LINK_TARGETS}, ${SKY130A})
DIST_LINK_TARGETS = ${LOCAL_PATH}/${LINK_TARGETS}
else
DIST_LINK_TARGETS = ${LINK_TARGETS}
endif
# Basic definitions for each EF process node
SKY130A_DEFS = -DTECHNAME=sky130A -DREVISION=${REVISION}
# Module definitions for each process node
# (Note that MOS is default and therefore not used anywhere)
SKY130A_DEFS += -DMETAL5 -DMIM -DREDISTRIBUTION
# SKY130A_DEFS += -DMETAL5 -DMIM
# Add staging path
SKY130A_DEFS += -DSTAGING_PATH=${STAGING_PATH}
ifeq (${EF_STYLE}, 1)
EF_FORMAT = -ef_format
SKY130A_DEFS += -DEF_FORMAT
else
EF_FORMAT = -std_format
endif
MAGICTOP = libs.tech/magic
NETGENTOP = libs.tech/netgen
QFLOWTOP = libs.tech/qflow
KLAYOUTTOP = libs.tech/klayout
OPENLANETOP = libs.tech/openlane
ifeq (${EF_STYLE}, 1)
MAGICPATH = ${MAGICTOP}/${REVISION}
else
MAGICPATH = ${MAGICTOP}
endif
# Currently, netgen, qflow, and klayout do not use revisioning (needs to change!)
NETGENPATH = ${NETGENTOP}
QFLOWPATH = ${QFLOWTOP}
KLAYOUTPATH = ${KLAYOUTTOP}
OPENLANEPATH = ${OPENLANETOP}
MAGICTOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${MAGICTOP}
NETGENTOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${NETGENTOP}
QFLOWTOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${QFLOWTOP}
KLAYOUTTOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${KLAYOUTTOP}
OPENLANETOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${OPENLANETOP}
MAGIC_STAGING_A = ${STAGING_PATH}/${SKY130A}/${MAGICPATH}
NETGEN_STAGING_A = ${STAGING_PATH}/${SKY130A}/${NETGENPATH}
QFLOW_STAGING_A = ${STAGING_PATH}/${SKY130A}/${QFLOWPATH}
KLAYOUT_STAGING_A = ${STAGING_PATH}/${SKY130A}/${KLAYOUTPATH}
OPENLANE_STAGING_A = ${STAGING_PATH}/${SKY130A}/${OPENLANEPATH}
SKY130A_DEFS += -DMAGIC_CURRENT=${MAGICTOP}/current
# Where cpp syntax is followed, this is equivalent to cpp, but it does not
# mangle non-C source files under the belief that they are actually C code.
CPP = ../common/preproc.py
# The following script in the ../common directory does most of the work of
# copying or linking the foundry vendor files to the target directory.
STAGE = set -f ; ../common/foundry_install.py ${EF_FORMAT}
INSTALL = ../common/staging_install.py ${EF_FORMAT}
# The script(s) below are used for custom changes to the vendor PDK files
ADDPROP = ../common/insert_property.py ${EF_FORMAT}
# List the EDA tools to install local setup files for
TOOLS = magic qflow netgen klayout openlane
all: all-a
all-a:
echo "Starting sky130A PDK staging on "`date` > ${SKY130A}_install.log
${MAKE} tools-a
${MAKE} vendor-a
echo "Ended sky130A PDK staging on "`date` >> ${SKY130A}_install.log
tools-a: general-a magic-a qflow-a netgen-a klayout-a openlane-a
general-a: ${TECH}.json
mkdir -p ${STAGING_PATH}/${SKY130A}/${CONFIG_DIR}
rm -f ${STAGING_PATH}/${SKY130A}/${CONFIG_DIR}/nodeinfo.json
${CPP} ${SKY130A_DEFS} ${TECH}.json > \
${STAGING_PATH}/${SKY130A}/${CONFIG_DIR}/nodeinfo.json
magic-a: magic/${TECH}.tech magic/${TECH}gds.tech magic/${TECH}.magicrc magic/${TECH}.tcl
mkdir -p ${MAGICTOP_STAGING_A}
mkdir -p ${MAGIC_STAGING_A}
rm -f ${MAGICTOP_STAGING_A}/current
rm -f ${MAGIC_STAGING_A}/${SKY130A}.tech
rm -f ${MAGIC_STAGING_A}/${SKY130A}-GDS.tech
rm -f ${MAGIC_STAGING_A}/${SKY130A}.tcl
rm -f ${MAGIC_STAGING_A}/${SKY130A}-BindKeys
rm -f ${MAGIC_STAGING_A}/magicrc
(cd ${MAGICTOP_STAGING_A} ; ln -s ${REV_DIR} current)
cp -rp custom/scripts/seal_ring_generator ${MAGIC_STAGING_A}/.
${CPP} ${SKY130A_DEFS} magic/${TECH}.tech > ${MAGIC_STAGING_A}/${SKY130A}.tech
${CPP} ${SKY130A_DEFS} magic/${TECH}gds.tech > ${MAGIC_STAGING_A}/${SKY130A}-GDS.tech
${CPP} ${SKY130A_DEFS} magic/${TECH}.magicrc > ${MAGIC_STAGING_A}/${SKY130A}.magicrc
${CPP} ${SKY130A_DEFS} ../common/pdk.bindkeys > ${MAGIC_STAGING_A}/${SKY130A}-BindKeys
${CPP} ${SKY130A_DEFS} magic/${TECH}.tcl > ${MAGIC_STAGING_A}/${SKY130A}.tcl
${CPP} ${SKY130A_DEFS} ../common/pdk.tcl >> ${MAGIC_STAGING_A}/${SKY130A}.tcl
qflow-a: qflow/${TECH}.sh qflow/${TECH}.par
mkdir -p ${QFLOWTOP_STAGING_A}
mkdir -p ${QFLOW_STAGING_A}
rm -f ${QFLOW_STAGING_A}/${SKY130A}hd.sh
rm -f ${QFLOW_STAGING_A}/${SKY130A}hd.par
rm -f ${QFLOW_STAGING_A}/${SKY130A}hdll.sh
rm -f ${QFLOW_STAGING_A}/${SKY130A}hdll.par
rm -f ${QFLOW_STAGING_A}/${SKY130A}hs.sh
rm -f ${QFLOW_STAGING_A}/${SKY130A}hs.par
rm -f ${QFLOW_STAGING_A}/${SKY130A}hvl.sh
rm -f ${QFLOW_STAGING_A}/${SKY130A}hvl.par
rm -f ${QFLOW_STAGING_A}/${SKY130A}ls.sh
rm -f ${QFLOW_STAGING_A}/${SKY130A}ls.par
rm -f ${QFLOW_STAGING_A}/${SKY130A}lp.sh
rm -f ${QFLOW_STAGING_A}/${SKY130A}lp.par
rm -f ${QFLOW_STAGING_A}/${SKY130A}ms.sh
rm -f ${QFLOW_STAGING_A}/${SKY130A}ms.par
rm -f ${QFLOW_STAGING_A}/${SKY130A}osu.sh
rm -f ${QFLOW_STAGING_A}/${SKY130A}osu.par
${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_hd qflow/${TECH}.sh > \
${QFLOW_STAGING_A}/${SKY130A}hd.sh
${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_hdll qflow/${TECH}.sh > \
${QFLOW_STAGING_A}/${SKY130A}hdll.sh
${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_hvl qflow/${TECH}.sh > \
${QFLOW_STAGING_A}/${SKY130A}hvl.sh
${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_hs qflow/${TECH}.sh > \
${QFLOW_STAGING_A}/${SKY130A}hs.sh
${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_lp qflow/${TECH}.sh > \
${QFLOW_STAGING_A}/${SKY130A}lp.sh
${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_ls qflow/${TECH}.sh > \
${QFLOW_STAGING_A}/${SKY130A}ls.sh
${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_ms qflow/${TECH}.sh > \
${QFLOW_STAGING_A}/${SKY130A}ms.sh
${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_osu_sc qflow/sky130osu.sh > \
${QFLOW_STAGING_A}/${SKY130A}osu.sh
${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}hd.par
${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}hdll.par
${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}hvl.par
${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}hs.par
${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}ms.par
${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}lp.par
${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}ls.par
${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}osu.par
netgen-a: netgen/${TECH}_setup.tcl
mkdir -p ${NETGENTOP_STAGING_A}
mkdir -p ${NETGEN_STAGING_A}
rm -f ${NETGEN_STAGING_A}/${SKY130A}_setup.tcl
rm -f ${NETGEN_STAGING_A}/setup.tcl
${CPP} ${SKY130A_DEFS} netgen/${TECH}_setup.tcl > ${NETGEN_STAGING_A}/${SKY130A}_setup.tcl
(cd ${NETGEN_STAGING_A} ; ln -s ${SKY130A}_setup.tcl setup.tcl)
klayout-a: klayout/${TECH}.lyp klayout/${TECH}.lyt
mkdir -p ${KLAYOUTTOP_STAGING_A}
mkdir -p ${KLAYOUT_STAGING_A}
rm -f ${KLAYOUT_STAGING_A}/${SKY130A}.lyp
rm -f ${KLAYOUT_STAGING_A}/${SKY130A}.lyt
${CPP} ${SKY130A_DEFS} klayout/${TECH}.lyp > ${KLAYOUT_STAGING_A}/${SKY130A}.lyp
${CPP} ${SKY130A_DEFS} klayout/${TECH}.lyt > ${KLAYOUT_STAGING_A}/${SKY130A}.lyt
openlane-a: openlane/common_pdn.tcl openlane/config.tcl openlane/sky130_fd_sc_hd/config.tcl openlane/sky130_fd_sc_hs/config.tcl openlane/sky130_fd_sc_ms/config.tcl openlane/sky130_fd_sc_ls/config.tcl openlane/sky130_fd_sc_hdll/config.tcl
mkdir -p ${OPENLANETOP_STAGING_A}
mkdir -p ${OPENLANE_STAGING_A}
mkdir -p ${OPENLANE_STAGING_A}/sky130_fd_sc_hd
mkdir -p ${OPENLANE_STAGING_A}/sky130_fd_sc_hs
mkdir -p ${OPENLANE_STAGING_A}/sky130_fd_sc_ls
mkdir -p ${OPENLANE_STAGING_A}/sky130_fd_sc_ms
mkdir -p ${OPENLANE_STAGING_A}/sky130_fd_sc_hdll
mkdir -p ${OPENLANE_STAGING_A}/sky130_fd_sc_hvl
rm -f ${OPENLANE_STAGING_A}/common_pdn.info
rm -f ${OPENLANE_STAGING_A}/config.tcl
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/config.tcl
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/tracks.info
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/no_synth.cells
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/sky130_fd_sc_hd__fakediode_2.gds
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/config.tcl
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/tracks.info
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/no_synth.cells
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hdll/config.tcl
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hdll/tracks.info
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hdll/no_synth.cells
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_ls/config.tcl
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_ls/tracks.info
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_ls/no_synth.cells
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_ms/config.tcl
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_ms/tracks.info
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_ms/no_synth.cells
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hvl/config.tcl
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hvl/tracks.info
rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hvl/no_synth.cells
${CPP} ${SKY130A_DEFS} openlane/common_pdn.tcl > ${OPENLANE_STAGING_A}/common_pdn.tcl
${CPP} ${SKY130A_DEFS} openlane/config.tcl > ${OPENLANE_STAGING_A}/config.tcl
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hd/config.tcl > ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/config.tcl
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hd/tracks.info > ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/tracks.info
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hd/no_synth.cells > ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/no_synth.cells
cp openlane/sky130_fd_sc_hd/sky130_fd_sc_hd__fakediode_2.gds ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/sky130_fd_sc_hd__fakediode_2.gds
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hs/config.tcl > ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/config.tcl
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hs/tracks.info > ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/tracks.info
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hs/no_synth.cells > ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/no_synth.cells
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_ms/config.tcl > ${OPENLANE_STAGING_A}/sky130_fd_sc_ms/config.tcl
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_ms/tracks.info > ${OPENLANE_STAGING_A}/sky130_fd_sc_ms/tracks.info
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_ms/no_synth.cells > ${OPENLANE_STAGING_A}/sky130_fd_sc_ms/no_synth.cells
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_ls/config.tcl > ${OPENLANE_STAGING_A}/sky130_fd_sc_ls/config.tcl
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_ls/tracks.info > ${OPENLANE_STAGING_A}/sky130_fd_sc_ls/tracks.info
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_ls/no_synth.cells > ${OPENLANE_STAGING_A}/sky130_fd_sc_ls/no_synth.cells
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hdll/config.tcl > ${OPENLANE_STAGING_A}/sky130_fd_sc_hdll/config.tcl
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hdll/tracks.info > ${OPENLANE_STAGING_A}/sky130_fd_sc_hdll/tracks.info
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hdll/no_synth.cells > ${OPENLANE_STAGING_A}/sky130_fd_sc_hdll/no_synth.cells
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hvl/config.tcl > ${OPENLANE_STAGING_A}/sky130_fd_sc_hvl/config.tcl
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hvl/tracks.info > ${OPENLANE_STAGING_A}/sky130_fd_sc_hvl/tracks.info
${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hvl/no_synth.cells > ${OPENLANE_STAGING_A}/sky130_fd_sc_hvl/no_synth.cells
vendor-a:
# Install base device models from vendor files
# (NOTE: .mod and .pm3 files should not be in /cells/?)
${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
-ngspice sky130_fd_pr_base/v%v/models/* filter=custom/scripts/fixspice.py \
-ngspice sky130_fd_pr_base/v%v/cells/*.mod filter=custom/scripts/fixspice.py \
-ngspice sky130_fd_pr_base/v%v/cells/*.pm3 filter=custom/scripts/fixspice.py \
|& tee -a ${SKY130A}_install.log
# Install RF device models from vendor files
${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
-ngspice sky130_fd_pr_rf/v%v/models/* filter=custom/scripts/fixspice.py \
|& tee -a ${SKY130A}_install.log
# Install additional RF device models from vendor files
${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
-ngspice sky130_fd_pr_rf2/v%v/models/* filter=custom/scripts/fixspice.py \
|& tee -a ${SKY130A}_install.log
# Install base device library from vendor files
${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
-gds %l/v%v/cells/*/*.gds \
-spice %l/v%v/cells/*/*.spice ignore=topography \
-spice %l/v%v/cells/*/*.sp \
-library primitive sky130_fd_pr_base \
-library primitive sky130_fd_pr_rf \
-library primitive sky130_fd_pr_rf2 |& tee -a ${SKY130A}_install.log
# Install SkyWater I/O pad library
# Purposely ignoring "-lef sky130_fd_io/v%v/lef/*.lef" and making our own LEF views
${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
-gds %l/v%v/cells/*/*.gds \
-verilog %l/v%v/cells/*/*.v \
-lib %l/v%v/cells/*/*.lib \
-doc %l/v%v/cells/*/*.doc \
-cdl %l/v%v/cells/*/*.cdl ignore=topography \
-spice %l/v%v/cells/*/*.spice \
-library general sky130_fd_io |& tee -a ${SKY130A}_install.log
# Install all SkyWater digital standard cells.
${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
-techlef %l/latest/tech/*.tlef \
-spice %l/latest/cells/*/*.spice compile-only \
-cdl %l/latest/cells/*/*.cdl ignore=topography compile-only \
-lef %l/latest/cells/*/*.lef exclude=*.*.lef compile-only \
-doc %l/latest/cells/*/*.pdf \
-lib %l/latest/timing/*.lib \
-gds %l/latest/cells/*/*.gds compile-only \
-verilog %l/latest/cells/*/*.v compile-only \
-library digital sky130_fd_sc_hd \
-library digital sky130_fd_sc_hdll \
-library digital sky130_fd_sc_hvl \
-library digital sky130_fd_sc_hs \
-library digital sky130_fd_sc_ls \
-library digital sky130_fd_sc_ms \
-library digital sky130_fd_sc_lp |& tee -a ${SKY130A}_install.log
# Install OSU digital standard cells.
# ${STAGE} -source ${OSU_PATH} -target ${STAGING_PATH}/${SKY130A} \
# -techlef char/techfiles/scs8.lef rename sky130_osu_sc.tlef \
# -spice lib/spice/*.spice compile-only \
# -lef outputs/s8_osu130.lef rename sky130_osu_sc.lef \
# -lib outputs/*.lib \
# -gds lib/gds/*.gds compile-only \
# -verilog outputs/VERILOG/*.v \
# -library digital sky130_osu_sc
# Install additional model file (efabless)
# ${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \
# -ngspice models/*.lib rename ${SKY130A}.lib \
# |& tee -a ${SKY130A}_install.log
# # Install custom additions to I/O pad library
# ${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \
# -gds %l/gds/*.gds \
# -verilog %l/verilog/*.v \
# -lef %l/lef/*.lef \
# -spice %l/spice/*.spice \
# -library general sky130_fd_io |& tee -a ${SKY130A}_install.log
# # Add correct bounding boxes on Magic layouts
# ${ADDPROP} ${STAGING_PATH}/${SKY130A} sky130_fd_io sky130_fd_io_top_gpio_ovtv2 \
# "FIXED_BBOX 0 407 28000 40000"
# ${ADDPROP} ${STAGING_PATH}/${SKY130A} sky130_fd_io sky130_fd_io_top_xres4v2 \
# "FIXED_BBOX 0 407 15000 40000"
install:
if test "x${DIST_PATH}" == "x" ; then \
${MAKE} install-local ; \
else \
${MAKE} install-dist; \
fi
install-local: install-local-a
install-local-a:
echo "Starting SKY130 PDK migration on "`date` > ${SKY130A}_migrate.log
${INSTALL} -source ${STAGING_PATH}/${SKY130A} \
-target ${LOCAL_PATH}/${SKY130A} \
-link_from ${LINK_TARGETS} |& tee -a ${SKY130A}_migrate.log
echo "Ended SKY130 PDK migration on "`date` >> ${SKY130A}_migrate.log
install-dist: install-dist-a
install-dist-a:
echo "Starting SKY130 PDK migration on "`date` > ${SKY130A}_migrate.log
${INSTALL} -source ${STAGING_PATH}/${SKY130A} \
-target ${DIST_PATH}/${SKY130A} \
-local ${LOCAL_PATH}/${SKY130A} \
-link_from ${DIST_LINK_TARGETS} |& tee -a ${SKY130A}_migrate.log
echo "Ended SKY130 PDK migration on "`date` >> ${SKY130A}_migrate.log
clean: clean-a
clean-a:
${STAGE} -target ${STAGING_PATH}/${SKY130A} -clean
veryclean: veryclean-a
veryclean-a: clean-a
${RM} ${SKY130A}_install.log
${RM} ${SKY130A}_migrate.log