| #--------------------------------------- |
| # Torture test generator for EFGF013H |
| # (Specifically for EFGF013H; note that |
| # MiM and MoM caps need to be tested in |
| # each BEOL stack.) |
| #--------------------------------------- |
| |
| namespace path {::tcl::mathop ::tcl::mathfunc} |
| |
| # Set random seed so that torture test is not totally random. |
| srand 1234567 |
| |
| # NxN array MOSFET devices |
| |
| proc mos_array {n devname startx starty} { |
| suspendall |
| box position $startx $starty |
| set i 0 |
| for {set x 0} {$x < $n} {incr x} { |
| for {set y 0} {$y < $n} {incr y} { |
| |
| set r [int [* [rand] 20]] |
| set w [+ 0.22 [* 0.5 $r]] |
| set r [int [* [rand] 20]] |
| set l [+ 0.18 [* 0.3 $r]] |
| set m [int [+ 1 [* [rand] 8]]] |
| set nf [int [+ 1 [* [rand] 8]]] |
| |
| set r [int [* [rand] 8]] |
| set dcov [+ 20 [* 10 $r]] |
| set r [int [* [rand] 8]] |
| set pcov [+ 20 [* 10 $r]] |
| set r [int [* [rand] 8]] |
| set rlcov [+ 20 [* 10 $r]] |
| |
| if {[rand] > 0.5} {set pov 1} else {set pov 0} |
| if {[rand] > 0.5} {set dov 1} else {set dov 0} |
| if {[rand] > 0.5} {set tc 1} else {set tc 0} |
| if {[rand] > 0.5} {set bc 1} else {set bc 0} |
| if {[rand] > 0.5} {set fm 1} else {set fm 0} |
| if {[rand] > 0.5} {set gl 1} else {set gl 0} |
| if {[rand] > 0.5} {set gr 1} else {set gr 0} |
| if {[rand] > 0.5} {set gt 1} else {set gt 0} |
| if {[rand] > 0.5} {set gb 1} else {set gb 0} |
| |
| magic::gencell gf180mcu::${devname} ${devname}_$i w $w l $l m $m nf $nf diffcov $dcov polycov $pcov rlcov $rlcov poverlap $pov doverlap $dov topc $tc botc $bc full_metal $fm glc $gl grc $gr gbc $gb gtc $gt |
| select cell ${devname}_$i |
| set bh [box height] |
| set bh [+ $bh 124] |
| box move n $bh |
| incr i |
| } |
| set bp [box position] |
| set bpx [lindex $bp 0] |
| box position $bpx $starty |
| box move e 12700 |
| } |
| resumeall |
| } |
| |
| # NxN array resistor devices |
| |
| proc res_array {n devname startx starty} { |
| suspendall |
| box position $startx $starty |
| set i 0 |
| for {set x 0} {$x < $n} {incr x} { |
| for {set y 0} {$y < $n} {incr y} { |
| |
| set r [int [* [rand] 10]] |
| set w [+ 0.42 [* 0.5 $r]] |
| set r [int [* [rand] 50]] |
| set l [+ 2.10 [* 2.0 $r]] |
| set m [int [+ 1 [* [rand] 2]]] |
| set nx [int [+ 1 [* [rand] 10]]] |
| |
| set r [int [* [rand] 8]] |
| set ecov [+ 20 [* 10 $r]] |
| |
| if {[rand] > 0.5} {set rov 1} else {set rov 0} |
| if {[rand] > 0.5} {set sn 1} else {set sn 0} |
| if {[rand] > 0.5} {set fm 1} else {set fm 0} |
| if {[rand] > 0.5} {set gl 1} else {set gl 0} |
| if {[rand] > 0.5} {set gr 1} else {set gr 0} |
| if {[rand] > 0.5} {set gt 1} else {set gt 0} |
| if {[rand] > 0.5} {set gb 1} else {set gb 0} |
| |
| magic::gencell gf180mcu::${devname} ${devname}_$i w $w l $l m $m nx $nx endcov $ecov roverlap $rov snake $sn full_metal $fm glc $gl grc $gr gbc $gb gtc $gt |
| select cell ${devname}_$i |
| set bh [box height] |
| set bh [+ $bh 124] |
| box move n $bh |
| incr i |
| } |
| set bp [box position] |
| set bpx [lindex $bp 0] |
| box position $bpx $starty |
| box move e 12700 |
| } |
| resumeall |
| } |
| |
| # NxN array diode devices |
| |
| proc diode_array {n devname startx starty} { |
| suspendall |
| box position $startx $starty |
| set i 0 |
| for {set x 0} {$x < $n} {incr x} { |
| for {set y 0} {$y < $n} {incr y} { |
| |
| set r [int [* [rand] 10]] |
| set w [+ 0.42 [* 0.5 $r]] |
| set r [int [* [rand] 10]] |
| set l [+ 0.42 [* 0.5 $r]] |
| set nx [int [+ 1 [* [rand] 4]]] |
| set ny [int [+ 1 [* [rand] 4]]] |
| |
| if {[rand] > 0.5} {set dov 1} else {set dov 0} |
| if {[rand] > 0.5} {set el 1} else {set el 0} |
| if {[rand] > 0.5} {set er 1} else {set er 0} |
| if {[rand] > 0.5} {set et 1} else {set et 0} |
| if {[rand] > 0.5} {set eb 1} else {set eb 0} |
| if {[rand] > 0.5} {set fm 1} else {set fm 0} |
| if {[rand] > 0.5} {set gl 1} else {set gl 0} |
| if {[rand] > 0.5} {set gr 1} else {set gr 0} |
| if {[rand] > 0.5} {set gt 1} else {set gt 0} |
| if {[rand] > 0.5} {set gb 1} else {set gb 0} |
| |
| magic::gencell gf180mcu::${devname} ${devname}_$i w $w l $l nx $nx ny $ny doverlap $dov full_metal $fm elc $el erc $er etc $et ebc $eb glc $gl grc $gr gbc $gb gtc $gt |
| select cell ${devname}_$i |
| set bh [box height] |
| set bh [+ $bh 124] |
| box move n $bh |
| incr i |
| } |
| set bp [box position] |
| set bpx [lindex $bp 0] |
| box position $bpx $starty |
| box move e 12700 |
| } |
| resumeall |
| } |
| |
| # NxN array cap devices |
| |
| proc cap_array {n devname startx starty} { |
| suspendall |
| box position $startx $starty |
| set i 0 |
| for {set x 0} {$x < $n} {incr x} { |
| for {set y 0} {$y < $n} {incr y} { |
| |
| set r [int [* [rand] 10]] |
| set w [+ 2.00 [* 1.0 $r]] |
| set r [int [* [rand] 10]] |
| set l [+ 2.00 [* 1.0 $r]] |
| set nx [int [+ 1 [* [rand] 4]]] |
| set ny [int [+ 1 [* [rand] 4]]] |
| |
| if {[rand] > 0.5} {set bc 1} else {set bc 0} |
| if {[rand] > 0.5} {set tc 1} else {set tc 0} |
| |
| magic::gencell gf180mcu::${devname} ${devname}_$i w $w l $l nx $nx ny $ny bconnect $bc tconnect $tc |
| select cell ${devname}_$i |
| set bh [box height] |
| set bh [+ $bh 160] |
| box move n $bh |
| incr i |
| } |
| set bp [box position] |
| set bpx [lindex $bp 0] |
| box position $bpx $starty |
| box move e 12700 |
| } |
| resumeall |
| } |
| |
| # NxN fixed devices |
| |
| proc fixed_array {n devname startx starty} { |
| suspendall |
| box position $startx $starty |
| set i 0 |
| for {set x 0} {$x < $n} {incr x} { |
| for {set y 0} {$y < $n} {incr y} { |
| |
| set nx [int [+ 1 [* [rand] 4]]] |
| set ny [int [+ 1 [* [rand] 4]]] |
| |
| # Do not change the deltas---this will cause DRC problems |
| set r 0 |
| # set r [int [* [rand] 10]] |
| set deltax [/ $r 10.0] |
| # set r [int [* [rand] 10]] |
| set deltay [/ $r 10.0] |
| |
| magic::gencell gf180mcu::${devname} ${devname}_$i nx $nx ny $ny deltax $deltax deltay $deltay |
| select cell ${devname}_$i |
| set bh [box height] |
| set bh [* $bh [+ $ny 1]] |
| box move n $bh |
| incr i |
| } |
| set bp [box position] |
| set bpx [lindex $bp 0] |
| box position $bpx $starty |
| box move e 20000 |
| } |
| resumeall |
| } |
| tech unlock * |
| snap int |
| box size 0 0 |
| |
| # Layout: |
| # apmom_bb |
| # pmos_3p3 mim_sm_bb |
| # pplus_u ppolyf_s ppolyf_u pplus_u_3p3 |
| # nmos_3p3 pn_3p3 |
| # np_3p3 |
| # pmos_1p2 |
| # nplus_u nwell_1p2 npolyf_u nplus_u_3p3 pn_1p2 |
| # pmos_1p2 np_1p2 |
| # |
| |
| |
| mos_array 6 nmos_3p3 0 0 |
| mos_array 6 pmos_3p3 0 75000 |
| mos_array 6 nmos_6p0 0 150000 |
| mos_array 6 pmos_6p0 0 225000 |
| mos_array 6 pmos_3p3_lvt 0 300000 |
| mos_array 6 pmos_3p3_hvt 0 375000 |
| mos_array 6 nmos_3p3_lvt 0 450000 |
| mos_array 6 nmos_3p3_hvt 0 525000 |
| mos_array 6 nmos_3p3_nat 0 600000 |
| mos_array 6 nmos_6p0_nat 0 675000 |
| |
| res_array 6 nplus_u 100000 0 |
| res_array 6 pplus_u 100000 180000 |
| |
| res_array 6 nwell_1p2 200000 0 |
| res_array 6 ppolyf_s 200000 180000 |
| |
| res_array 6 npolyf_u 300000 0 |
| res_array 6 ppolyf_u 300000 180000 |
| |
| res_array 6 nplus_u_3p3 400000 0 |
| res_array 6 pplus_u_3p3 400000 180000 |
| |
| diode_array 6 np_1p2 500000 0 |
| diode_array 6 pn_1p2 500000 30000 |
| diode_array 6 np_3p3 500000 60000 |
| diode_array 6 pn_3p3 500000 90000 |
| diode_array 6 np_1p2_lvt 500000 120000 |
| diode_array 6 np_1p2_hvt 500000 150000 |
| diode_array 6 np_1p2_nat 500000 180000 |
| diode_array 6 pn_1p2_lvt 500000 210000 |
| diode_array 6 pn_1p2_hvt 500000 240000 |
| diode_array 6 np_3p3_nat 500000 270000 |
| |
| # Add individual devices from primdev, check GDS pointers |
| fixed_array 2 vnpn_2x2 600000 0 |
| fixed_array 2 vnpn_5x0p42 600000 50000 |
| fixed_array 2 vnpn_5x5 600000 100000 |
| fixed_array 2 vnpn_10x0p42 600000 150000 |
| |
| cap_array 6 mim_sm_bb 600000 200000 |
| # cap_array 6 apmom_bb 600000 250000 |
| |
| save torture_test_gf013 |
| gds write torture_test_gf013 |
