| # Makefile for efabless design kits for SkyWater Sky130: | |
| # | |
| # sky130A = 5-metal backend stack with dual MiM | |
| # | |
| # Written by Tim Edwards March 2019 | |
| # efabless corporation | |
| # updated October 2019 | |
| # updated December 2019 (divide installation sections for individual tools) | |
| # updated March 2020 (refactored the install process) | |
| # updated May 2020 (changed to new process name Sky130) | |
| # | |
| # Instructions: | |
| # | |
| # Modify values below as needed: | |
| # | |
| # VENDOR_PATH: points to vendor sources | |
| # EF_STYLE: 1 for efabless style, 0 otherwise | |
| # LINK_TARGETS: link back to source or link to 1st PDK when possible | |
| # DIST_PATH: install location for distributed install | |
| # LOCAL_PATH: install location for local install or runtime location | |
| # for distributed install | |
| # | |
| # Run "make" to stage the PDK for tool setup and vendor libraries | |
| # If installing into the final destination (local install): | |
| # | |
| # Run "make install-local" to install all staged files | |
| # ("make install" is equivalent to "make install-local") | |
| # | |
| # If installing into a repository to be distributed to the final destination: | |
| # | |
| # Run "make install-dist" to install all staged files | |
| # | |
| # Run "make clean" to remove all staging files. | |
| # | |
| # Run "make veryclean" to remove all staging and install log files. | |
| # | |
| # For the sake of simplicity, the "standard" local install can be done | |
| # with the usual | |
| # | |
| # make | |
| # make install | |
| # make clean | |
| # | |
| #-------------------------------------------------------------------- | |
| # This Makefile contains bash-isms | |
| SHELL = bash | |
| REVISION = 20200508 | |
| TECH = sky130 | |
| # If EF_STYLE is set to 1, then efabless naming conventions are | |
| # used, otherwise the generic naming conventions are used. | |
| # Mainly, the hierarchy of library names and file types is reversed | |
| # (e.g., sky130_fd_sc_hd/lef vs. lef/sky130_fd_sc_hd). | |
| EF_STYLE = 0 | |
| # EF_STYLE = 1 | |
| # Normally it's fine to keep the staging path in a local directory, | |
| # although /tmp or a dedicated staging area are also fine, as long | |
| # as the install process can write to the path. | |
| STAGING_PATH = `pwd` | |
| # If LINK_TARGETS is set to "none", then files are copied | |
| # from the SkyWater sources to the target. If set to "source", | |
| # symbolic links are made in the target directories pointing | |
| # back to the SkyWater sources. If set to the name of another | |
| # PDK (e.g, "sky130A"), then symbolic links are made to the | |
| # same files in that PDK, where they exist, and are copied | |
| # from source, where they don't. | |
| # LINK_TARGETS = source | |
| LINK_TARGETS = none | |
| # LINK_TARGETS = sky130A | |
| # Paths: | |
| # Path to skywater_pdk (to be changed to public repo; work in progress) | |
| # Version below comes from foss-eda-tools.googlesource.com | |
| # SKYWATER_PATH = ~/gits/skywater-pdk-scratch/skywater-pdk/libraries | |
| # Version below is also from foss-eda-tools and is more recent than | |
| # the scratch repo above. | |
| SKYWATER_PATH = ~/gits/skywater-pdk/libraries | |
| # Path to OSU standard cell library sources | |
| OSU_PATH = ~/gits/osu_130_pdk | |
| # NOTE: Install destination is the git repository of the technology platform. | |
| # Once updated in git, the git project can be distributed to all hosts. | |
| # | |
| ifeq (${EF_STYLE}, 1) | |
| LOCAL_PATH = /ef/tech/SW | |
| CONFIG_DIR = .ef-config | |
| REV_DIR = ${REVISION} | |
| else | |
| # LOCAL_PATH = /usr/local/share/vlsi/SkyWater | |
| LOCAL_PATH = ~/projects/efabless/tech/SW | |
| CONFIG_DIR = .config | |
| REV_DIR = . | |
| endif | |
| DIST_PATH = ~/gits/ef-skywater-${TECH} | |
| # EF process nodes created from the master sources | |
| SKY130A = sky130A | |
| ifeq (${LINK_TARGETS}, ${SKY130A}) | |
| DIST_LINK_TARGETS = ${LOCAL_PATH}/${LINK_TARGETS} | |
| else | |
| DIST_LINK_TARGETS = ${LINK_TARGETS} | |
| endif | |
| # Basic definitions for each EF process node | |
| SKY130A_DEFS = -DTECHNAME=sky130A -DREVISION=${REVISION} | |
| # Module definitions for each process node | |
| # (Note that MOS is default and therefore not used anywhere) | |
| SKY130A_DEFS += -DMETAL5 -DMIM -DREDISTRIBUTION | |
| # SKY130A_DEFS += -DMETAL5 -DMIM | |
| # Add staging path | |
| SKY130A_DEFS += -DSTAGING_PATH=${STAGING_PATH} | |
| ifeq (${EF_STYLE}, 1) | |
| EF_FORMAT = -ef_format | |
| SKY130A_DEFS += -DEF_FORMAT | |
| else | |
| EF_FORMAT = -std_format | |
| endif | |
| MAGICTOP = libs.tech/magic | |
| NETGENTOP = libs.tech/netgen | |
| QFLOWTOP = libs.tech/qflow | |
| KLAYOUTTOP = libs.tech/klayout | |
| OPENLANETOP = libs.tech/openlane | |
| ifeq (${EF_STYLE}, 1) | |
| MAGICPATH = ${MAGICTOP}/${REVISION} | |
| else | |
| MAGICPATH = ${MAGICTOP} | |
| endif | |
| # Currently, netgen, qflow, and klayout do not use revisioning (needs to change!) | |
| NETGENPATH = ${NETGENTOP} | |
| QFLOWPATH = ${QFLOWTOP} | |
| KLAYOUTPATH = ${KLAYOUTTOP} | |
| OPENLANEPATH = ${OPENLANETOP} | |
| MAGICTOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${MAGICTOP} | |
| NETGENTOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${NETGENTOP} | |
| QFLOWTOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${QFLOWTOP} | |
| KLAYOUTTOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${KLAYOUTTOP} | |
| OPENLANETOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${OPENLANETOP} | |
| MAGIC_STAGING_A = ${STAGING_PATH}/${SKY130A}/${MAGICPATH} | |
| NETGEN_STAGING_A = ${STAGING_PATH}/${SKY130A}/${NETGENPATH} | |
| QFLOW_STAGING_A = ${STAGING_PATH}/${SKY130A}/${QFLOWPATH} | |
| KLAYOUT_STAGING_A = ${STAGING_PATH}/${SKY130A}/${KLAYOUTPATH} | |
| OPENLANE_STAGING_A = ${STAGING_PATH}/${SKY130A}/${OPENLANEPATH} | |
| SKY130A_DEFS += -DMAGIC_CURRENT=${MAGICTOP}/current | |
| # Where cpp syntax is followed, this is equivalent to cpp, but it does not | |
| # mangle non-C source files under the belief that they are actually C code. | |
| CPP = ../common/preproc.py | |
| # The following script in the ../common directory does most of the work of | |
| # copying or linking the foundry vendor files to the target directory. | |
| STAGE = set -f ; ../common/foundry_install.py ${EF_FORMAT} | |
| INSTALL = ../common/staging_install.py ${EF_FORMAT} | |
| # The script(s) below are used for custom changes to the vendor PDK files | |
| ADDPROP = ../common/insert_property.py ${EF_FORMAT} | |
| # List the EDA tools to install local setup files for | |
| TOOLS = magic qflow netgen klayout openlane | |
| all: all-a | |
| all-a: | |
| echo "Starting sky130A PDK staging on "`date` > ${SKY130A}_install.log | |
| ${MAKE} tools-a | |
| ${MAKE} vendor-a | |
| echo "Ended sky130A PDK staging on "`date` >> ${SKY130A}_install.log | |
| tools-a: general-a magic-a qflow-a netgen-a klayout-a openlane-a | |
| general-a: ${TECH}.json | |
| mkdir -p ${STAGING_PATH}/${SKY130A}/${CONFIG_DIR} | |
| rm -f ${STAGING_PATH}/${SKY130A}/${CONFIG_DIR}/nodeinfo.json | |
| ${CPP} ${SKY130A_DEFS} ${TECH}.json > \ | |
| ${STAGING_PATH}/${SKY130A}/${CONFIG_DIR}/nodeinfo.json | |
| magic-a: magic/${TECH}.tech magic/${TECH}gds.tech magic/${TECH}.magicrc magic/${TECH}.tcl | |
| mkdir -p ${MAGICTOP_STAGING_A} | |
| mkdir -p ${MAGIC_STAGING_A} | |
| rm -f ${MAGICTOP_STAGING_A}/current | |
| rm -f ${MAGIC_STAGING_A}/${SKY130A}.tech | |
| rm -f ${MAGIC_STAGING_A}/${SKY130A}-GDS.tech | |
| rm -f ${MAGIC_STAGING_A}/${SKY130A}.tcl | |
| rm -f ${MAGIC_STAGING_A}/${SKY130A}-BindKeys | |
| rm -f ${MAGIC_STAGING_A}/magicrc | |
| (cd ${MAGICTOP_STAGING_A} ; ln -s ${REV_DIR} current) | |
| cp -rp custom/scripts/seal_ring_generator ${MAGIC_STAGING_A}/. | |
| ${CPP} ${SKY130A_DEFS} magic/${TECH}.tech > ${MAGIC_STAGING_A}/${SKY130A}.tech | |
| ${CPP} ${SKY130A_DEFS} magic/${TECH}gds.tech > ${MAGIC_STAGING_A}/${SKY130A}-GDS.tech | |
| ${CPP} ${SKY130A_DEFS} magic/${TECH}.magicrc > ${MAGIC_STAGING_A}/${SKY130A}.magicrc | |
| ${CPP} ${SKY130A_DEFS} ../common/pdk.bindkeys > ${MAGIC_STAGING_A}/${SKY130A}-BindKeys | |
| ${CPP} ${SKY130A_DEFS} magic/${TECH}.tcl > ${MAGIC_STAGING_A}/${SKY130A}.tcl | |
| ${CPP} ${SKY130A_DEFS} ../common/pdk.tcl >> ${MAGIC_STAGING_A}/${SKY130A}.tcl | |
| qflow-a: qflow/${TECH}.sh qflow/${TECH}.par | |
| mkdir -p ${QFLOWTOP_STAGING_A} | |
| mkdir -p ${QFLOW_STAGING_A} | |
| rm -f ${QFLOW_STAGING_A}/${SKY130A}hd.sh | |
| rm -f ${QFLOW_STAGING_A}/${SKY130A}hd.par | |
| rm -f ${QFLOW_STAGING_A}/${SKY130A}hdll.sh | |
| rm -f ${QFLOW_STAGING_A}/${SKY130A}hdll.par | |
| rm -f ${QFLOW_STAGING_A}/${SKY130A}hs.sh | |
| rm -f ${QFLOW_STAGING_A}/${SKY130A}hs.par | |
| rm -f ${QFLOW_STAGING_A}/${SKY130A}hvl.sh | |
| rm -f ${QFLOW_STAGING_A}/${SKY130A}hvl.par | |
| rm -f ${QFLOW_STAGING_A}/${SKY130A}ls.sh | |
| rm -f ${QFLOW_STAGING_A}/${SKY130A}ls.par | |
| rm -f ${QFLOW_STAGING_A}/${SKY130A}lp.sh | |
| rm -f ${QFLOW_STAGING_A}/${SKY130A}lp.par | |
| rm -f ${QFLOW_STAGING_A}/${SKY130A}ms.sh | |
| rm -f ${QFLOW_STAGING_A}/${SKY130A}ms.par | |
| rm -f ${QFLOW_STAGING_A}/${SKY130A}osu.sh | |
| rm -f ${QFLOW_STAGING_A}/${SKY130A}osu.par | |
| ${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_hd qflow/${TECH}.sh > \ | |
| ${QFLOW_STAGING_A}/${SKY130A}hd.sh | |
| ${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_hdll qflow/${TECH}.sh > \ | |
| ${QFLOW_STAGING_A}/${SKY130A}hdll.sh | |
| ${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_hvl qflow/${TECH}.sh > \ | |
| ${QFLOW_STAGING_A}/${SKY130A}hvl.sh | |
| ${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_hs qflow/${TECH}.sh > \ | |
| ${QFLOW_STAGING_A}/${SKY130A}hs.sh | |
| ${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_lp qflow/${TECH}.sh > \ | |
| ${QFLOW_STAGING_A}/${SKY130A}lp.sh | |
| ${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_ls qflow/${TECH}.sh > \ | |
| ${QFLOW_STAGING_A}/${SKY130A}ls.sh | |
| ${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_ms qflow/${TECH}.sh > \ | |
| ${QFLOW_STAGING_A}/${SKY130A}ms.sh | |
| ${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_osu_sc qflow/sky130osu.sh > \ | |
| ${QFLOW_STAGING_A}/${SKY130A}osu.sh | |
| ${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}hd.par | |
| ${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}hdll.par | |
| ${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}hvl.par | |
| ${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}hs.par | |
| ${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}ms.par | |
| ${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}lp.par | |
| ${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}ls.par | |
| ${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}osu.par | |
| netgen-a: netgen/${TECH}_setup.tcl | |
| mkdir -p ${NETGENTOP_STAGING_A} | |
| mkdir -p ${NETGEN_STAGING_A} | |
| rm -f ${NETGEN_STAGING_A}/${SKY130A}_setup.tcl | |
| rm -f ${NETGEN_STAGING_A}/setup.tcl | |
| ${CPP} ${SKY130A_DEFS} netgen/${TECH}_setup.tcl > ${NETGEN_STAGING_A}/${SKY130A}_setup.tcl | |
| (cd ${NETGEN_STAGING_A} ; ln -s ${SKY130A}_setup.tcl setup.tcl) | |
| klayout-a: klayout/${TECH}.lyp klayout/${TECH}.lyt | |
| mkdir -p ${KLAYOUTTOP_STAGING_A} | |
| mkdir -p ${KLAYOUT_STAGING_A} | |
| rm -f ${KLAYOUT_STAGING_A}/${SKY130A}.lyp | |
| rm -f ${KLAYOUT_STAGING_A}/${SKY130A}.lyt | |
| ${CPP} ${SKY130A_DEFS} klayout/${TECH}.lyp > ${KLAYOUT_STAGING_A}/${SKY130A}.lyp | |
| ${CPP} ${SKY130A_DEFS} klayout/${TECH}.lyt > ${KLAYOUT_STAGING_A}/${SKY130A}.lyt | |
| openlane-a: openlane/common_pdn.tcl openlane/config.tcl openlane/sky130_fd_sc_hd/config.tcl openlane/sky130_fd_sc_hs/config.tcl openlane/sky130_fd_sc_ms/config.tcl openlane/sky130_fd_sc_ls/config.tcl openlane/sky130_fd_sc_hdll/config.tcl | |
| mkdir -p ${OPENLANETOP_STAGING_A} | |
| mkdir -p ${OPENLANE_STAGING_A} | |
| mkdir -p ${OPENLANE_STAGING_A}/sky130_fd_sc_hd | |
| mkdir -p ${OPENLANE_STAGING_A}/sky130_fd_sc_hs | |
| mkdir -p ${OPENLANE_STAGING_A}/sky130_fd_sc_ls | |
| mkdir -p ${OPENLANE_STAGING_A}/sky130_fd_sc_ms | |
| mkdir -p ${OPENLANE_STAGING_A}/sky130_fd_sc_hdll | |
| mkdir -p ${OPENLANE_STAGING_A}/sky130_fd_sc_hvl | |
| rm -f ${OPENLANE_STAGING_A}/common_pdn.info | |
| rm -f ${OPENLANE_STAGING_A}/config.tcl | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/config.tcl | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/tracks.info | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/no_synth.cells | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/sky130_fd_sc_hd__fakediode_2.gds | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/config.tcl | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/tracks.info | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/no_synth.cells | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hdll/config.tcl | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hdll/tracks.info | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hdll/no_synth.cells | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_ls/config.tcl | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_ls/tracks.info | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_ls/no_synth.cells | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_ms/config.tcl | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_ms/tracks.info | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_ms/no_synth.cells | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hvl/config.tcl | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hvl/tracks.info | |
| rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hvl/no_synth.cells | |
| ${CPP} ${SKY130A_DEFS} openlane/common_pdn.tcl > ${OPENLANE_STAGING_A}/common_pdn.tcl | |
| ${CPP} ${SKY130A_DEFS} openlane/config.tcl > ${OPENLANE_STAGING_A}/config.tcl | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hd/config.tcl > ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/config.tcl | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hd/tracks.info > ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/tracks.info | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hd/no_synth.cells > ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/no_synth.cells | |
| cp openlane/sky130_fd_sc_hd/sky130_fd_sc_hd__fakediode_2.gds ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/sky130_fd_sc_hd__fakediode_2.gds | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hs/config.tcl > ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/config.tcl | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hs/tracks.info > ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/tracks.info | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hs/no_synth.cells > ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/no_synth.cells | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_ms/config.tcl > ${OPENLANE_STAGING_A}/sky130_fd_sc_ms/config.tcl | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_ms/tracks.info > ${OPENLANE_STAGING_A}/sky130_fd_sc_ms/tracks.info | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_ms/no_synth.cells > ${OPENLANE_STAGING_A}/sky130_fd_sc_ms/no_synth.cells | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_ls/config.tcl > ${OPENLANE_STAGING_A}/sky130_fd_sc_ls/config.tcl | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_ls/tracks.info > ${OPENLANE_STAGING_A}/sky130_fd_sc_ls/tracks.info | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_ls/no_synth.cells > ${OPENLANE_STAGING_A}/sky130_fd_sc_ls/no_synth.cells | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hdll/config.tcl > ${OPENLANE_STAGING_A}/sky130_fd_sc_hdll/config.tcl | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hdll/tracks.info > ${OPENLANE_STAGING_A}/sky130_fd_sc_hdll/tracks.info | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hdll/no_synth.cells > ${OPENLANE_STAGING_A}/sky130_fd_sc_hdll/no_synth.cells | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hvl/config.tcl > ${OPENLANE_STAGING_A}/sky130_fd_sc_hvl/config.tcl | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hvl/tracks.info > ${OPENLANE_STAGING_A}/sky130_fd_sc_hvl/tracks.info | |
| ${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hvl/no_synth.cells > ${OPENLANE_STAGING_A}/sky130_fd_sc_hvl/no_synth.cells | |
| vendor-a: | |
| # Install base device models from vendor files | |
| # (NOTE: .mod and .pm3 files should not be in /cells/?) | |
| ${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \ | |
| -ngspice sky130_fd_pr_base/v%v/models/* filter=custom/scripts/fixspice.py \ | |
| -ngspice sky130_fd_pr_base/v%v/cells/*.mod filter=custom/scripts/fixspice.py \ | |
| -ngspice sky130_fd_pr_base/v%v/cells/*.pm3 filter=custom/scripts/fixspice.py \ | |
| |& tee -a ${SKY130A}_install.log | |
| # Install RF device models from vendor files | |
| ${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \ | |
| -ngspice sky130_fd_pr_rf/v%v/models/* filter=custom/scripts/fixspice.py \ | |
| |& tee -a ${SKY130A}_install.log | |
| # Install additional RF device models from vendor files | |
| ${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \ | |
| -ngspice sky130_fd_pr_rf2/v%v/models/* filter=custom/scripts/fixspice.py \ | |
| |& tee -a ${SKY130A}_install.log | |
| # Install base device library from vendor files | |
| ${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \ | |
| -gds %l/v%v/cells/*/*.gds \ | |
| -spice %l/v%v/cells/*/*.spice ignore=topography \ | |
| -spice %l/v%v/cells/*/*.sp \ | |
| -library primitive sky130_fd_pr_base \ | |
| -library primitive sky130_fd_pr_rf \ | |
| -library primitive sky130_fd_pr_rf2 |& tee -a ${SKY130A}_install.log | |
| # Install SkyWater I/O pad library | |
| # Purposely ignoring "-lef sky130_fd_io/v%v/lef/*.lef" and making our own LEF views | |
| ${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \ | |
| -gds %l/v%v/cells/*/*.gds \ | |
| -verilog %l/v%v/cells/*/*.v \ | |
| -lib %l/v%v/cells/*/*.lib \ | |
| -doc %l/v%v/cells/*/*.doc \ | |
| -cdl %l/v%v/cells/*/*.cdl ignore=topography \ | |
| -spice %l/v%v/cells/*/*.spice \ | |
| -library general sky130_fd_io |& tee -a ${SKY130A}_install.log | |
| # Install all SkyWater digital standard cells. | |
| ${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \ | |
| -techlef %l/latest/tech/*.tlef \ | |
| -spice %l/latest/cells/*/*.spice compile-only \ | |
| -cdl %l/latest/cells/*/*.cdl ignore=topography compile-only \ | |
| -lef %l/latest/cells/*/*.lef exclude=*.*.lef compile-only \ | |
| -doc %l/latest/cells/*/*.pdf \ | |
| -lib %l/latest/timing/*.lib \ | |
| -gds %l/latest/cells/*/*.gds compile-only \ | |
| -verilog %l/latest/cells/*/*.v compile-only \ | |
| -library digital sky130_fd_sc_hd \ | |
| -library digital sky130_fd_sc_hdll \ | |
| -library digital sky130_fd_sc_hvl \ | |
| -library digital sky130_fd_sc_hs \ | |
| -library digital sky130_fd_sc_ls \ | |
| -library digital sky130_fd_sc_ms \ | |
| -library digital sky130_fd_sc_lp |& tee -a ${SKY130A}_install.log | |
| # Install OSU digital standard cells. | |
| # ${STAGE} -source ${OSU_PATH} -target ${STAGING_PATH}/${SKY130A} \ | |
| # -techlef char/techfiles/scs8.lef rename sky130_osu_sc.tlef \ | |
| # -spice lib/spice/*.spice compile-only \ | |
| # -lef outputs/s8_osu130.lef rename sky130_osu_sc.lef \ | |
| # -lib outputs/*.lib \ | |
| # -gds lib/gds/*.gds compile-only \ | |
| # -verilog outputs/VERILOG/*.v \ | |
| # -library digital sky130_osu_sc | |
| # Install additional model file (efabless) | |
| # ${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \ | |
| # -ngspice models/*.lib rename ${SKY130A}.lib \ | |
| # |& tee -a ${SKY130A}_install.log | |
| # # Install custom additions to I/O pad library | |
| # ${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \ | |
| # -gds %l/gds/*.gds \ | |
| # -verilog %l/verilog/*.v \ | |
| # -lef %l/lef/*.lef \ | |
| # -spice %l/spice/*.spice \ | |
| # -library general sky130_fd_io |& tee -a ${SKY130A}_install.log | |
| # # Add correct bounding boxes on Magic layouts | |
| # ${ADDPROP} ${STAGING_PATH}/${SKY130A} sky130_fd_io sky130_fd_io_top_gpio_ovtv2 \ | |
| # "FIXED_BBOX 0 407 28000 40000" | |
| # ${ADDPROP} ${STAGING_PATH}/${SKY130A} sky130_fd_io sky130_fd_io_top_xres4v2 \ | |
| # "FIXED_BBOX 0 407 15000 40000" | |
| install: install-local | |
| install-local: install-local-a | |
| install-local-a: | |
| echo "Starting SKY130 PDK migration on "`date` > ${SKY130A}_migrate.log | |
| ${INSTALL} -source ${STAGING_PATH}/${SKY130A} \ | |
| -target ${LOCAL_PATH}/${SKY130A} \ | |
| -link_from ${LINK_TARGETS} |& tee -a ${SKY130A}_migrate.log | |
| echo "Ended SKY130 PDK migration on "`date` >> ${SKY130A}_migrate.log | |
| install-dist: install-dist-a | |
| install-dist-a: | |
| echo "Starting SKY130 PDK migration on "`date` > ${SKY130A}_migrate.log | |
| ${INSTALL} -source ${STAGING_PATH}/${SKY130A} \ | |
| -target ${DIST_PATH}/${SKY130A} \ | |
| -local ${LOCAL_PATH}/${SKY130A} \ | |
| -link_from ${DIST_LINK_TARGETS} |& tee -a ${SKY130A}_migrate.log | |
| echo "Ended SKY130 PDK migration on "`date` >> ${SKY130A}_migrate.log | |
| clean: clean-a | |
| clean-a: | |
| ${STAGE} -target ${STAGING_PATH}/${SKY130A} -clean | |
| veryclean: veryclean-a | |
| veryclean-a: clean-a | |
| ${RM} ${SKY130A}_install.log | |
| ${RM} ${SKY130A}_migrate.log |