blob: 34adcfccfd50b88d2c7fe9b9ab92119012ef2f81 [file] [log] [blame]
###
### Source file gf013.tcl
### Process this file with the preprocessor script
###
#-----------------------------------------------------
# Magic/TCL design kit for GF TECHNAME
#-----------------------------------------------------
# Tim Edwards
# Revision 0 4/25/2022
#-----------------------------------------------------
if {[catch {set TECHPATH $env(PDK_ROOT)}]} {
set TECHPATH STAGING_PATH
}
if [catch {set PDKPATH}] {set PDKPATH ${TECHPATH}/TECHNAME}
set PDKNAME TECHNAME
# "gf180mcu" is the namespace used for all devices
set PDKNAMESPACE gf180mcu
puts stdout "Loading TECHNAME Device Generator Menu ..."
# Initialize toolkit menus to the wrapper window
global Opts
namespace eval gf180mcu {}
# Set the window callback
if [catch {set Opts(callback)}] {set Opts(callback) ""}
set Opts(callback) [subst {gf180mcu::addtechmenu \$framename; $Opts(callback)}]
# if {![info exists Opts(cmdentry)]} {set Opts(cmdentry) 1}
# Set options specific to this PDK
set Opts(hidelocked) 1
set Opts(hidespecial) 0
# Wrap the closewrapper procedure so that closing the last
# window is equivalent to quitting.
if {[info commands closewrapper] == "closewrapper"} {
rename closewrapper closewrapperonly
proc closewrapper { framename } {
if {[llength [windownames all]] <= 1} {
magic::quit
} else {
closewrapperonly $framename
}
}
}
# Remove maze router layers from the toolbar by locking them
tech lock fence,magnet,rotate
namespace eval gf180mcu {
namespace path {::tcl::mathop ::tcl::mathfunc}
set ruleset [dict create]
# Process DRC rules (magic style)
dict set ruleset poly_surround 0.065 ;# Poly surrounds contact
dict set ruleset diff_surround 0.065 ;# Diffusion surrounds contact
dict set ruleset gate_to_diffcont 0.26 ;# Gate to diffusion contact center
dict set ruleset gate_to_polycont 0.28 ;# Gate to poly contact center
dict set ruleset gate_extension 0.22 ;# Poly extension beyond gate
dict set ruleset diff_extension 0.23 ;# Diffusion extension beyond gate
dict set ruleset contact_size 0.23 ;# Minimum contact size
dict set ruleset via_size 0.26 ;# Minimum via size
dict set ruleset metal_surround 0.055 ;# Metal1 overlaps contact
dict set ruleset sub_surround 0.12 ;# Sub/well surrounds diffusion
dict set ruleset diff_spacing 0.33 ;# Diffusion spacing rule
dict set ruleset poly_spacing 0.24 ;# Poly spacing rule
dict set ruleset diffres_spacing 0.40 ;# Diffusion resistor spacing rule
dict set ruleset polyres_spacing 0.40 ;# Poly resistor spacing rule
dict set ruleset diff_poly_space 0.10 ;# Diffusion to poly spacing rule
dict set ruleset diff_gate_space 0.10 ;# Diffusion to gate poly spacing rule
dict set ruleset metal_spacing 0.23 ;# Metal1 spacing rule
dict set ruleset mmetal_spacing 0.23 ;# Metal spacing rule (above metal1)
dict set ruleset sblk_to_cont 0.335 ;# resistor to contact center
dict set ruleset sblk_diff_space 0.44 ;# resistor to guard ring
}
#-----------------------------------------------------
# magic::addtechmenu
#-----------------------------------------------------
proc gf180mcu::addtechmenu {framename} {
global Winopts Opts
# Check for difference between magic 8.1.125 and earlier, and 8.1.126 and later
if {[catch {${framename}.titlebar cget -height}]} {
set layoutframe ${framename}.pane.top
} else {
set layoutframe ${framename}
}
# List of devices is long. Divide into two sections for active and passive deivces
magic::add_toolkit_menu $layoutframe "Devices 1" pdk1
magic::add_toolkit_command $layoutframe "nmos - nMOSFET" "magic::gencell gf180mcu::nfet_03v3" pdk1
magic::add_toolkit_command $layoutframe "pmos - pMOSFET" "magic::gencell gf180mcu::pfet_03v3" pdk1
magic::add_toolkit_separator $layoutframe pdk1
magic::add_toolkit_command $layoutframe "diode_nd2ps_03v3 - n-diode" "magic::gencell gf180mcu::diode_nd2ps_03v3" pdk1
magic::add_toolkit_command $layoutframe "diode_pd2nw_03v3 - p-diode" "magic::gencell gf180mcu::diode_pd2nw_03v3" pdk1
magic::add_toolkit_separator $layoutframe pdk1
magic::add_toolkit_command $layoutframe "npn_10p00x10p00 (3.3V) - 10.0um x 10.0um " "magic::gencell gf180mcu::npn_10p00x10p00" pdk1
magic::add_toolkit_command $layoutframe "npn_05p00x05p00 (3.3V) - 5.0um x 5.0um " "magic::gencell gf180mcu::npn_05p00x05p00" pdk1
magic::add_toolkit_command $layoutframe "npn_10p00x10p00 (3.3V) - 0.54um x 4.0um " "magic::gencell gf180mcu::npn_00p54x04p00" pdk1
magic::add_toolkit_command $layoutframe "npn_00p54x02p00 (3.3V) - 0.54um x 2.0um " "magic::gencell gf180mcu::npn_00p54x02p00" pdk1
magic::add_toolkit_command $layoutframe "pnp_10p00x10p00 (3.3V) - 10.0um x 10.0um " "magic::gencell gf180mcu::pnp_10p00x10p00" pdk1
magic::add_toolkit_command $layoutframe "pnp_05p00x05p00 (3.3V) - 5.0um x 5.0um " "magic::gencell gf180mcu::pnp_05p00x05p00" pdk1
magic::add_toolkit_command $layoutframe "pnp_10p00x00p42 (3.3V) - 10.0um x 0.42um " "magic::gencell gf180mcu::pnp_10p00x00p42" pdk1
magic::add_toolkit_command $layoutframe "pnp_05p00x00p42 (3.3V) - 5.0um x 0.42um " "magic::gencell gf180mcu::pnp_05p00x00p42" pdk1
magic::add_toolkit_separator $layoutframe pdk1
magic::add_toolkit_command $layoutframe "mos capacitor" "magic::gencell gf180mcu::nmoscap_3p3" pdk1
magic::add_toolkit_menu $layoutframe "Devices 2" pdk2
magic::add_toolkit_command $layoutframe "ppolyf_s - 7 Ohm/sq " "magic::gencell gf180mcu::ppolyf_s" pdk2
magic::add_toolkit_command $layoutframe "npolyf_s - 7 Ohm/sq " "magic::gencell gf180mcu::ppolyf_s" pdk2
magic::add_toolkit_command $layoutframe "nplus_u (3.3V) - 85 Ohm/sq " "magic::gencell gf180mcu::nplus_u" pdk2
magic::add_toolkit_command $layoutframe "pplus_u (3.3V) - 128 Ohm/sq " "magic::gencell gf180mcu::pplus_u" pdk2
magic::add_toolkit_command $layoutframe "nplus_u (6.0V) - 85 Ohm/sq " "magic::gencell gf180mcu::nplus_u_6p0" pdk2
magic::add_toolkit_command $layoutframe "pplus_u (6.0V) - 128 Ohm/sq " "magic::gencell gf180mcu::pplus_u_6p0" pdk2
magic::add_toolkit_command $layoutframe "npolyf_u - 300 Ohm/sq " "magic::gencell gf180mcu::npolyf_u" pdk2
magic::add_toolkit_command $layoutframe "ppolyf_u - 315 Ohm/sq " "magic::gencell gf180mcu::ppolyf_u" pdk2
#ifdef HRPOLY1K
magic::add_toolkit_command $layoutframe "ppolyf_u_1k - 1.0k Ohm/sq " "magic::gencell gf180mcu::ppolyf_u_1k" pdk2
#endif (HRPOLY1K)
magic::add_toolkit_command $layoutframe "nwell (3.3V) -1680 Ohm/sq " "magic::gencell gf180mcu::nwell_3p3" pdk2
magic::add_toolkit_separator $layoutframe pdk2
magic::add_toolkit_command $layoutframe "rm1 - 90 mOhm/sq " "magic::gencell gf180mcu::rm1" pdk2
magic::add_toolkit_command $layoutframe "rm2 - 90 mOhm/sq " "magic::gencell gf180mcu::rm2" pdk2
#ifdef METALS3
#ifdef THICKMET3P0
magic::add_toolkit_command $layoutframe "rm3 - 9.5 mOhm/sq " "magic::gencell gf180mcu::rm3" pdk2
#elseif (THICKMET1P1 || THICKMET0P9)
magic::add_toolkit_command $layoutframe "rm3 - 40 mOhm/sq " "magic::gencell gf180mcu::rm3" pdk2
#else (!(THICKMET3P0 || THICKMET1P1 || THICKMET0P9))
magic::add_toolkit_command $layoutframe "rm3 - 60 mOhm/sq " "magic::gencell gf180mcu::rm3" pdk2
#endif (!(THICKMET3P0 || THICKMET1P1 || THICKMET0P9))
#endif (METALS3)
#ifdef METALS4 || METALS5 || METALS6
magic::add_toolkit_command $layoutframe "rm3 - 90 mOhm/sq " "magic::gencell gf180mcu::rm3" pdk2
#endif (METALS4 || METALS5 || METALS6)
#ifdef METALS4
#ifdef THICKMET3P0
magic::add_toolkit_command $layoutframe "rm4 - 9.5 mOhm/sq " "magic::gencell gf180mcu::rm4" pdk2
#elseif (THICKMET1P1 || THICKMET0P9)
magic::add_toolkit_command $layoutframe "rm4 - 40 mOhm/sq " "magic::gencell gf180mcu::rm4" pdk2
#else (!(THICKMET3P0 || THICKMET1P1 || THICKMET0P9))
magic::add_toolkit_command $layoutframe "rm4 - 60 mOhm/sq " "magic::gencell gf180mcu::rm4" pdk2
#endif (!(THICKMET3P0 || THICKMET1P1 || THICKMET0P9))
#endif (METALS4)
#ifdef METALS5 || METALS6
magic::add_toolkit_command $layoutframe "rm4 - 90 mOhm/sq " "magic::gencell gf180mcu::rm4" pdk2
#endif (METALS5 || METALS6)
#ifdef METALS5
#ifdef THICKMET3P0
magic::add_toolkit_command $layoutframe "rm5 - 9.5 mOhm/sq " "magic::gencell gf180mcu::rm5" pdk2
#elseif (THICKMET1P1 || THICKMET0P9)
magic::add_toolkit_command $layoutframe "rm5 - 40 mOhm/sq " "magic::gencell gf180mcu::rm5" pdk2
#else (!(THICKMET3P0 || THICKMET1P1 || THICKMET0P9))
magic::add_toolkit_command $layoutframe "rm5 - 60 mOhm/sq " "magic::gencell gf180mcu::rm5" pdk2
#endif (!(THICKMET3P0 || THICKMET1P1 || THICKMET0P9))
#endif (METALS3)
#ifdef METALS6
magic::add_toolkit_command $layoutframe "rm5 - 90 mOhm/sq " "magic::gencell gf180mcu::rm5" pdk2
#endif (METALS5)
#ifdef METALS6
#ifdef THICKMET3P0
magic::add_toolkit_command $layoutframe "rmtp - 9.5 mOhm/sq " "magic::gencell gf180mcu::rmtp" pdk2
#elseif (THICKMET1P1 || THICKMET0P9)
magic::add_toolkit_command $layoutframe "rmtp - 40 mOhm/sq " "magic::gencell gf180mcu::rmtp" pdk2
#else (!(THICKMET3P0 || THICKMET1P1 || THICKMET0P9))
magic::add_toolkit_command $layoutframe "rmtp - 60 mOhm/sq " "magic::gencell gf180mcu::rmtp" pdk2
#endif (!(THICKMET3P0 || THICKMET1P1 || THICKMET0P9))
#endif (METALS6)
magic::add_toolkit_separator $layoutframe pdk2
#ifdef MIM
magic::add_toolkit_command $layoutframe "cap_mim_2p0fF - MiM cap " "magic::gencell gf180mcu::cap_mim_2p0fF" pdk2
#endif (MIM)
magic::add_toolkit_separator $layoutframe pdk2
magic::add_toolkit_command $layoutframe "substrate contact (3.3V) " "gf180mcu::subcon_3p3_draw" pdk2
magic::add_toolkit_command $layoutframe "substrate contact (6.0V) " "gf180mcu::subcon_6p0_draw" pdk2
magic::add_toolkit_command $layoutframe "via1 " "gf180mcu::via1_draw" pdk2
#ifdef METALS3 || METALS4 || METALS5 || METALS6
magic::add_toolkit_command $layoutframe "via2 " "gf180mcu::via2_draw" pdk2
#endif (METALS3 || METALS4 || METALS5 || METALS6)
#ifdef METALS4 || METALS5 || METALS6
magic::add_toolkit_command $layoutframe "via3 " "gf180mcu::via3_draw" pdk2
#endif (METALS4 || METALS5 || METALS6)
#ifdef METALS5 || METALS6
magic::add_toolkit_command $layoutframe "via4 " "gf180mcu::via4_draw" pdk2
#endif (METALS5 || METALS6)
#ifdef METALS6
magic::add_toolkit_command $layoutframe "viatp " "gf180mcu::viatp_draw" pdk2
#endif (METALS6)
${layoutframe}.titlebar.mbuttons.drc.toolmenu add command -label "DRC Routing" -command {drc style drc(routing)}
# Add SPICE import function to File menu
${layoutframe}.titlebar.mbuttons.file.toolmenu insert 4 command -label "Import SPICE" -command {gf180mcu::importspice}
${layoutframe}.titlebar.mbuttons.file.toolmenu insert 4 separator
# Add command entry window by default if enabled
if {[info exists Opts(cmdentry)]} {
set Winopts(${framename},cmdentry) $Opts(cmdentry)
} else {
set Winopts(${framename},cmdentry) 0
}
if {$Winopts(${framename},cmdentry) == 1} {
addcommandentry $framename
}
}
#----------------------------------------------------------------
# Menu callback function to read a SPICE netlist and generate an
# initial layout using the SKYWATER sky130A gencells.
#----------------------------------------------------------------
proc gf180mcu::importspice {} {
global CAD_ROOT
set Layoutfilename [ tk_getOpenFile -filetypes \
{{SPICE {.spice .spc .spi .ckt .cir .sp \
{.spice .spc .spi .ckt .cir .sp}}} {"All files" {*}}}]
if {$Layoutfilename != ""} {
magic::netlist_to_layout $Layoutfilename gf180mcu
}
}
#----------------------------------------------------------------
proc gf180mcu::via1_draw {} {
set w [magic::i2u [box width]]
set h [magic::i2u [box height]]
if {$w < 0.28} {
puts stderr "Via1 width must be at least 0.28um"
return
}
if {$h < 0.28} {
puts stderr "Via1 height must be at least 0.28um"
return
}
paint via1
box grow n 0.05um
box grow s 0.05um
paint m2
box grow n -0.05um
box grow s -0.05um
box grow e 0.05um
box grow w 0.05um
paint m1
box grow e -0.05um
box grow w -0.05um
}
#ifdef METALS3 || METALS4 || METALS5 || METALS6
proc gf180mcu::via2_draw {} {
set w [magic::i2u [box width]]
set h [magic::i2u [box height]]
if {$w < 0.28} {
puts stderr "Via2 width must be at least 0.28um"
return
}
if {$h < 0.28} {
puts stderr "Via2 height must be at least 0.28um"
return
}
paint via2
box grow n 0.05um
box grow s 0.05um
paint m2
box grow n -0.05um
box grow s -0.05um
box grow e 0.05um
box grow w 0.05um
paint m3
box grow e -0.05um
box grow w -0.05um
}
#endif (METALS3 || METALS4 || METALS5 || METALS6)
#ifdef METALS4 || METALS5 || METALS6
proc gf180mcu::via3_draw {} {
set w [magic::i2u [box width]]
set h [magic::i2u [box height]]
if {$w < 0.28} {
puts stderr "Via3 width must be at least 0.28um"
return
}
if {$h < 0.28} {
puts stderr "Via3 height must be at least 0.28um"
return
}
paint via3
box grow n 0.05um
box grow s 0.05um
paint m4
box grow n -0.05um
box grow s -0.05um
box grow e 0.05um
box grow w 0.05um
paint m3
box grow e -0.05um
box grow w -0.05um
}
#endif (METALS4 || METALS5 || METALS6)
#ifdef METALS5 || METALS6
proc gf180mcu::via4_draw {} {
set w [magic::i2u [box width]]
set h [magic::i2u [box height]]
if {$w < 0.28} {
puts stderr "Via4 width must be at least 0.28um"
return
}
if {$h < 0.28} {
puts stderr "Via4 height must be at least 0.28um"
return
}
paint via4
box grow n 0.05um
box grow s 0.05um
paint m5
box grow n -0.05um
box grow s -0.05um
box grow e 0.05um
box grow w 0.05um
paint m4
box grow e -0.05um
box grow w -0.05um
}
#endif (METALS5 || METALS6)
#ifdef METALS6
proc gf180mcu::viatp_draw {} {
set w [magic::i2u [box width]]
set h [magic::i2u [box height]]
if {$w < 0.28} {
puts stderr "ViaTP width must be at least 0.28um"
return
}
if {$h < 0.28} {
puts stderr "ViaTP height must be at least 0.28um"
return
}
paint viatp
box grow c 0.08um
paint mtp
box grow c -0.08um
box grow e 0.05um
box grow w 0.05um
paint m5
box grow e -0.05um
box grow w -0.05um
}
#endif (METALS6)
proc gf180mcu::subcon_3p3_draw {} {
set w [magic::i2u [box width]]
set h [magic::i2u [box height]]
if {$w < 0.23} {
puts stderr "Substrate tap width must be at least 0.23um"
return
}
if {$h < 0.23} {
puts stderr "Substrate tap height must be at least 0.23um"
return
}
paint subdiffc
box grow c 0.1um
paint subdiff
box grow c 0.1um
paint pwell
box grow c -0.2um
}
#----------------------------------------------------------------
proc gf180mcu::subcon_06v0_draw {} {
set w [magic::i2u [box width]]
set h [magic::i2u [box height]]
if {$w < 0.23} {
puts stderr "Substrate tap width must be at least 0.23um"
return
}
if {$h < 0.23} {
puts stderr "Substrate tap height must be at least 0.23um"
return
}
paint mvsubdiffc
box grow c 0.1um
paint mvsubdiff
box grow c 0.1um
paint pwell
box grow c -0.2um
}
#----------------------------------------------------------------
proc gf180mcu::res_recalc {field parameters} {
set snake 0
set sterm 0.0
set caplen 0
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
set val [magic::spice2float $val]
set l [magic::spice2float $l]
set w [magic::spice2float $w]
if {$snake == 0} {
# Straight resistor calculation
switch $field {
val { set l [expr ($val * ($w - $dw) - (2 * $term)) / $rho]
set w [expr ((2 * $term + $l * $rho) / $val) + $dw]
}
w { set val [expr (2 * $term + $l * $rho) / ($w - $dw)]
set l [expr ($val * ($w - $dw) - (2 * $term)) / $rho]
}
l { set val [expr (2 * $term + $l * $rho) / ($w - $dw)]
set w [expr ((2 * $term + $l * $rho) / $val) + $dw]
}
}
} else {
set term [expr $term + $sterm]
# Snake resistor calculation
switch $field {
val { set l [expr (($val - $rho * ($nx - 1)) * ($w - $dw) \
- (2 * $term) - ($rho * $caplen * ($nx - 1))) \
/ ($rho * $nx)]
set w [expr ((2 * $term + $l * $rho * $nx \
+ $caplen * $rho * ($nx - 1)) \
/ ($val - $rho * ($nx - 1))) + $dw]
}
w { set val [expr $rho * ($nx - 1) + ((2 * $term) \
+ ($rho * $l * $nx) + ($rho * $caplen * ($nx - 1))) \
/ ($w - $dw)]
set l [expr (($val - $rho * ($nx - 1)) * ($w - $dw) \
- (2 * $term) - ($rho * $caplen * ($nx - 1))) \
/ ($rho * $nx)]
}
l { set val [expr $rho * ($nx - 1) + ((2 * $term) \
+ ($rho * $l * $nx) + ($rho * $caplen * ($nx - 1))) \
/ ($w - $dw)]
set w [expr ((2 * $term + $l * $rho * $nx \
+ $caplen * $rho * ($nx - 1)) \
/ ($val - $rho * ($nx - 1))) + $dw]
}
}
}
set val [magic::3digitpastdecimal $val]
set w [magic::3digitpastdecimal $w]
set l [magic::3digitpastdecimal $l]
dict set parameters val $val
dict set parameters w $w
dict set parameters l $l
return $parameters
}
#----------------------------------------------------------------
# Drawn diode routines
#----------------------------------------------------------------
proc gf180mcu::diode_recalc {field parameters} {
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
switch $field {
area { puts stdout "area changed" }
peri { puts stdout "perimeter changed" }
w { puts stdout "width changed" }
l { puts stdout "length changed" }
}
dict set parameters area $area
dict set parameters peri $peri
dict set parameters w $w
dict set parameters l $l
}
#----------------------------------------------------------------
# diode: Conversion from SPICE netlist parameters to toolkit
#----------------------------------------------------------------
proc gf180mcu::diode_convert {parameters} {
set pdkparams [dict create]
dict for {key value} $parameters {
switch -nocase $key {
l -
w -
peri {
# Length, width, and perimeter are converted to units of microns
set value [magic::spice2float $value]
set value [expr $value * 1e6]
set value [magic::3digitpastdecimal $value]
dict set pdkparams [string tolower $key] $value
}
area {
# area also converted to units of microns
set value [magic::spice2float $value]
set value [expr $value * 1e12]
set value [magic::3digitpastdecimal $value]
dict set pdkparams [string tolower $key] $value
}
m {
# Convert m to ny
dict set pdkparams ny $value
}
}
}
return $pdkparams
}
#----------------------------------------------------------------
# diode: Interactively specifies the fixed layout parameters
#----------------------------------------------------------------
proc gf180mcu::diode_dialog {device parameters} {
# Editable fields: w, l, area, perim, nx, ny
magic::add_entry area "Area (um^2)" $parameters
magic::add_entry peri "Perimeter (um)" $parameters
gf180mcu::compute_aptot $parameters
magic::add_message atot "Total area (um^2)" $parameters
magic::add_message ptot "Total perimeter (um)" $parameters
magic::add_entry l "Length (um)" $parameters
magic::add_entry w "Width (um)" $parameters
magic::add_entry nx "X Repeat" $parameters
magic::add_entry ny "Y Repeat" $parameters
if {[dict exists $parameters compatible]} {
set sellist [dict get $parameters compatible]
# Reserved word "gencell" has special behavior to change the
# underlying device type
dict set parameters gencell $device
magic::add_selectlist gencell "Device type" $sellist $parameters
}
magic::add_checkbox doverlap "Overlap at end contact" $parameters
if {[dict exists $parameters elc]} {
magic::add_checkbox elc "Add left end contact" $parameters
}
if {[dict exists $parameters erc]} {
magic::add_checkbox erc "Add right end contact" $parameters
}
if {[dict exists $parameters etc]} {
magic::add_checkbox etc "Add top end contact" $parameters
}
if {[dict exists $parameters ebc]} {
magic::add_checkbox ebc "Add bottom end contact" $parameters
}
if {[dict exists $parameters guard]} {
magic::add_checkbox full_metal "Full metal guard ring" $parameters
}
if {[dict exists $parameters glc]} {
magic::add_checkbox glc "Add left guard ring contact" $parameters
}
if {[dict exists $parameters grc]} {
magic::add_checkbox grc "Add right guard ring contact" $parameters
}
if {[dict exists $parameters gtc]} {
magic::add_checkbox gtc "Add top guard ring contact" $parameters
}
if {[dict exists $parameters gbc]} {
magic::add_checkbox gbc "Add bottom guard ring contact" $parameters
}
magic::add_dependency gf180mcu::diode_recalc $device gf180mcu l w area peri
# magic::add_checkbox dummy "Add dummy" $parameters
}
#----------------------------------------------------------------
# Diode total area and perimeter computation
#----------------------------------------------------------------
proc gf180mcu::compute_aptot {parameters} {
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
set area [magic::spice2float $area]
set area [magic::3digitpastdecimal $area]
set peri [magic::spice2float $peri]
set peri [magic::3digitpastdecimal $peri]
# Compute total area
catch {set magic::atot_val [expr ($area * $nx * $ny)]}
# Compute total perimeter
catch {set magic::ptot_val [expr ($peri * $nx * $ny)]}
}
#----------------------------------------------------------------
# diode: Check device parameters for out-of-bounds values
#----------------------------------------------------------------
proc gf180mcu::diode_check {parameters} {
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
# Normalize distance units to microns
set l [magic::spice2float $l]
set l [magic::3digitpastdecimal $l]
set w [magic::spice2float $w]
set w [magic::3digitpastdecimal $w]
set area [magic::spice2float $area]
set area [magic::3digitpastdecimal $area]
set peri [magic::spice2float $peri]
set peri [magic::3digitpastdecimal $peri]
if {$l == 0} {
# Calculate L from W and area
set l [expr ($area / $w)]
dict set parameters l [magic::float2spice $l]
} elseif {$w == 0} {
# Calculate W from L and area
set w [expr ($area / $l)]
dict set parameters w [magic::float2spice $w]
}
if {$w < $wmin} {
puts stderr "Diode width must be >= $wmin"
dict set parameters w $wmin
}
if {$l < $lmin} {
puts stderr "Diode length must be >= $lmin"
dict set parameters l $lmin
}
# Calculate area and perimeter from L and W
set area [expr ($l * $w)]
dict set parameters area [magic::float2spice $area]
set peri [expr (2 * ($l + $w))]
dict set parameters peri [magic::float2spice $peri]
gf180mcu::compute_aptot $parameters
return $parameters
}
#----------------------------------------------------------------
proc gf180mcu::diode_nd2ps_03v3_defaults {} {
return {w 0.45 l 0.45 area 0.2025 peri 1.8 \
nx 1 ny 1 dummy 0 lmin 0.45 wmin 0.45 \
elc 1 erc 1 etc 1 ebc 1 doverlap 0 full_metal 1 \
compatible {diode_nd2ps_03v3 diode_nd2ps_06v0}}
}
proc gf180mcu::diode_pd2nw_03v3_defaults {} {
return {w 0.45 l 0.45 area 0.2025 peri 1.8 \
nx 1 ny 1 dummy 0 lmin 0.45 wmin 0.45 \
elc 1 erc 1 etc 1 ebc 1 \
glc 1 grc 1 gtc 0 gbc 0 doverlap 0 full_metal 1 \
compatible {diode_pd2nw_03v3 diode_pd2nw_06v0}}
}
proc gf180mcu::diode_nd2ps_06v0_defaults {} {
return {w 0.45 l 0.45 area 0.2025 peri 1.8 \
nx 1 ny 1 dummy 0 lmin 0.45 wmin 0.45 \
elc 1 erc 1 etc 1 ebc 1 doverlap 0 \
full_metal 1 \
compatible {diode_nd2ps_03v3 diode_nd2ps_06v0}}
}
proc gf180mcu::diode_pd2nw_06v0_defaults {} {
return {w 0.45 l 0.45 area 0.2025 peri 1.8 \
nx 1 ny 1 dummy 0 lmin 0.45 wmin 0.45 \
elc 1 erc 1 etc 1 ebc 1 \
glc 1 grc 1 gtc 0 gbc 0 doverlap 0 \
compatible {diode_pd2nw_03v3 diode_pd2nw_06v0}}
}
#----------------------------------------------------------------
proc gf180mcu::diode_nd2ps_03v3_convert {parameters} {
return [gf180mcu::diode_convert $parameters]
}
proc gf180mcu::diode_pd2nw_03v3_convert {parameters} {
return [gf180mcu::diode_convert $parameters]
}
proc gf180mcu::diode_nd2ps_06v0_convert {parameters} {
return [gf180mcu::diode_convert $parameters]
}
proc gf180mcu::diode_pd2nw_06v0_convert {parameters} {
return [gf180mcu::diode_convert $parameters]
}
#----------------------------------------------------------------
proc gf180mcu::diode_nd2ps_03v3_dialog {parameters} {
gf180mcu::diode_dialog diode_nd2ps_03v3 $parameters
}
proc gf180mcu::diode_pd2nw_03v3_dialog {parameters} {
gf180mcu::diode_dialog diode_pd2nw_03v3 $parameters
}
proc gf180mcu::diode_nd2ps_06v0_dialog {parameters} {
gf180mcu::diode_dialog diode_nd2ps_06v0 $parameters
}
proc gf180mcu::diode_pd2nw_06v0_dialog {parameters} {
gf180mcu::diode_dialog diode_pd2nw_06v0 $parameters
}
#----------------------------------------------------------------
proc gf180mcu::diode_nd2ps_03v3_check {parameters} {
gf180mcu::diode_check $parameters
}
proc gf180mcu::diode_pd2nw_03v3_check {parameters} {
gf180mcu::diode_check $parameters
}
proc gf180mcu::diode_nd2ps_06v0_check {parameters} {
gf180mcu::diode_check $parameters
}
proc gf180mcu::diode_pd2nw_06v0_check {parameters} {
gf180mcu::diode_check $parameters
}
#----------------------------------------------------------------
# Diode: Draw a single device
#----------------------------------------------------------------
proc gf180mcu::diode_device {parameters} {
# Epsilon for avoiding round-off errors
set eps 0.0005
# Set local default values if they are not in parameters
set dev_surround 0
set dev_sub_type ""
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
if {![dict exists $parameters end_contact_size]} {
set end_contact_size $contact_size
}
# Draw the device
pushbox
box size 0 0
set hw [/ $w 2.0]
set hl [/ $l 2.0]
# Calculate ring size (measured to contact center)
set gx [+ $w [* 2.0 [+ $dev_spacing $dev_surround]] $end_contact_size]
set gy [+ $l [* 2.0 [+ $dev_spacing $dev_surround]] $end_contact_size]
# Draw the ring first, because diode may occupy well/substrate plane
set guardparams $parameters
dict set guardparams plus_diff_type $end_type
dict set guardparams plus_contact_type $end_contact_type
dict set guardparams contact_size $end_contact_size
dict set guardparams diff_surround $end_surround
dict set guardparams sub_type $end_sub_type
dict set guardparams glc $elc
dict set guardparams grc $erc
dict set guardparams gtc $etc
dict set guardparams gbc $ebc
set cext [gf180mcu::guard_ring $gx $gy $guardparams]
pushbox
box grow n ${hl}um
box grow s ${hl}um
box grow e ${hw}um
box grow w ${hw}um
paint ${dev_type}
set cext [gf180mcu::unionbox $cext [gf180mcu::getbox]]
if {$dev_sub_type != ""} {
box grow n ${sub_surround}um
box grow s ${sub_surround}um
box grow e ${sub_surround}um
box grow w ${sub_surround}um
paint ${dev_sub_type}
}
popbox
if {${w} < ${l}} {
set orient vert
} else {
set orient horz
}
# Reduce width by surround amount
set w [- $w [* ${dev_surround} 2.0]]
set l [- $l [* ${dev_surround} 2.0]]
set cext [gf180mcu::unionbox $cext [gf180mcu::draw_contact ${w} ${l} \
${dev_surround} ${metal_surround} ${contact_size} \
${dev_type} ${dev_contact_type} m1 ${orient}]]
popbox
return $cext
}
#----------------------------------------------------------------
# Diode: Draw the tiled device
#----------------------------------------------------------------
proc gf180mcu::diode_draw {parameters} {
tech unlock *
# Set defaults if they are not in parameters
set doverlap 0 ;# overlap diodes at contacts
set guard 0 ;# draw a guard ring
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
# Normalize distance units to microns
set w [magic::spice2float $w]
set l [magic::spice2float $l]
pushbox
box values 0 0 0 0
# Determine the base device dimensions by drawing one device
# while all layers are locked (nothing drawn). This allows the
# base drawing routine to do complicated geometry without having
# to duplicate it here with calculations.
tech lock *
set bbox [gf180mcu::diode_device $parameters]
# puts stdout "Diagnostic: Device bounding box e $bbox (um)"
tech unlock *
set fw [- [lindex $bbox 2] [lindex $bbox 0]]
set fh [- [lindex $bbox 3] [lindex $bbox 1]]
set lw [+ [lindex $bbox 2] [lindex $bbox 0]]
set lh [+ [lindex $bbox 3] [lindex $bbox 1]]
# Determine tile width and height (depends on overlap)
if {$doverlap == 0} {
set dx [+ $fw $end_spacing]
set dy [+ $fh $end_spacing]
} else {
# overlap contact
set dx [- $fw [+ [* 2.0 $sub_surround] [* 2.0 $end_surround] $contact_size]]
set dy [- $fh [+ [* 2.0 $sub_surround] [* 2.0 $end_surround] $contact_size]]
}
# Determine core width and height
set corex [+ [* [- $nx 1] $dx] $fw]
set corey [+ [* [- $ny 1] $dy] $fh]
set corellx [/ [+ [- $corex $fw] $lw] 2.0]
set corelly [/ [+ [- $corey $fh] $lh] 2.0]
if {$guard != 0} {
# Calculate guard ring size (measured to contact center)
set gx [+ $corex [* 2.0 [+ $diff_spacing $diff_surround]] $contact_size]
set gy [+ $corey [* 2.0 [+ $diff_spacing $diff_surround]] $contact_size]
# Draw the guard ring first, because diode may occupy well/substrate plane
gf180mcu::guard_ring $gx $gy $parameters
}
pushbox
box move w ${corellx}um
box move s ${corelly}um
if {($nx > 1) || ($ny > 1)} {
pushbox
set hfw [/ $fw 2.0]
set hfh [/ $fh 2.0]
box move w ${hfw}um
box move s ${hfh}um
box size ${corex}um ${corey}um
paint $end_sub_type
popbox
}
for {set xp 0} {$xp < $nx} {incr xp} {
pushbox
for {set yp 0} {$yp < $ny} {incr yp} {
gf180mcu::diode_device $parameters
box move n ${dy}um
}
popbox
box move e ${dx}um
}
popbox
popbox
tech revert
}
#----------------------------------------------------------------
proc gf180mcu::diode_nd2ps_03v3_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
set newdict [dict create \
dev_type ndiode \
dev_contact_type ndic \
end_type psd \
end_contact_type psc \
end_contact_size 0.16 \
end_sub_type pwell \
dev_spacing 0.25 \
dev_surround ${diff_surround} \
end_spacing ${diff_spacing} \
end_surround ${diff_surround} \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::diode_draw $drawdict]
}
#----------------------------------------------------------------
proc gf180mcu::diode_pd2nw_03v3_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
set newdict [dict create \
guard 1 \
dev_type pdiode \
dev_contact_type pdic \
end_type nsd \
end_contact_type nsc \
end_contact_size 0.16 \
end_sub_type nwell \
plus_diff_type psd \
plus_contact_type psc \
sub_type pwell \
dev_spacing 0.25 \
dev_surround ${diff_surround} \
end_spacing ${diff_spacing} \
end_surround ${diff_surround} \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::diode_draw $drawdict]
}
#----------------------------------------------------------------
proc gf180mcu::diode_nd2ps_06v0_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
set newdict [dict create \
diff_poly_space 0.30 \
diff_gate_space 0.30 \
diff_spacing 0.36 \
dev_type mvndiode \
dev_contact_type mvndic \
end_type mvpsd \
end_contact_type mvpsc \
end_sub_type pwell \
dev_spacing 0.25 \
dev_surround ${diff_surround} \
end_spacing 0.36 \
end_surround ${diff_surround} \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::diode_draw $drawdict]
}
#----------------------------------------------------------------
proc gf180mcu::diode_pd2nw_06v0_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
set newdict [dict create \
diff_poly_space 0.30 \
diff_gate_space 0.30 \
diff_spacing 0.36 \
guard 1 \
dev_type mvpdiode \
dev_contact_type mvpdic \
end_type mvnsd \
end_contact_type mvnsc \
end_sub_type nwell \
plus_diff_type mvpsd \
plus_contact_type mvpsc \
sub_type pwell \
dev_spacing ${diff_spacing} \
dev_surround ${diff_surround} \
end_spacing ${diff_spacing} \
end_surround ${diff_surround} \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::diode_draw $drawdict]
}
#----------------------------------------------------------------
# Drawn capactitor routines
#----------------------------------------------------------------
# MiM minimum size set to 2.165 to prevent isolated via
#ifdef MIM
proc gf180mcu::cap_mim_2p0fF_defaults {} {
return {w 5.00 l 5.00 val 50.000 carea 25.00 cperi 20.00 \
nx 1 ny 1 dummy 0 square 0 lmin 5.00 wmin 5.00 \
lmax 100.0 wmax 100.0 dc 0 bconnect 1 tconnect 1}
}
#endif MIM
#----------------------------------------------------------------
# Recalculate capacitor values from GUI entries.
# Recomputes W/L and Value as long as 2 of them are present
# (To be completed)
#----------------------------------------------------------------
proc gf180mcu::cap_recalc {field parameters} {
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
switch $field {
val { puts stdout "value changed" }
w { puts stdout "width changed" }
l { puts stdout "length changed" }
}
dict set parameters val $val
dict set parameters w $w
dict set parameters l $l
}
#----------------------------------------------------------------
# Capacitor defaults:
#----------------------------------------------------------------
# w Width of drawn cap
# l Length of drawn cap
# nx Number of devices in X
# ny Number of devices in Y
# val Default cap value
# carea Area
# cperi Perimeter
# dummy Add dummy cap
# square Make square capacitor
#
# (not user-editable)
#
# wmin Minimum allowed width
# lmin Minimum allowed length
# dc Area to remove to calculated area
#----------------------------------------------------------------
#----------------------------------------------------------------
# capacitor: Conversion from SPICE netlist parameters to toolkit
#----------------------------------------------------------------
proc gf180mcu::cap_convert {parameters} {
set pdkparams [dict create]
dict for {key value} $parameters {
set canonkey $key
switch -nocase $key {
c_length -
c_width -
l -
w {
switch -nocase $key {
c_length {
set canonkey l
}
c_width {
set canonkey w
}
}
# Length and width are converted to units of microns
set value [magic::spice2float $value]
set value [expr $value * 1e6]
set value [magic::3digitpastdecimal $value]
dict set pdkparams [string tolower $canonkey] $value
}
m {
# Convert m to ny
dict set pdkparams ny $value
}
}
}
return $pdkparams
}
#ifdef MIM
proc gf180mcu::cap_mim_2p0fF_convert {parameters} {
return [cap_convert $parameters]
}
#endif
#----------------------------------------------------------------
# capacitor: Interactively specifies the fixed layout parameters
#----------------------------------------------------------------
proc gf180mcu::cap_dialog {device parameters} {
# Editable fields: w, l, nx, ny, val
# Checked fields: square, dummy
magic::add_entry val "Value (fF)" $parameters
gf180mcu::compute_ctot $parameters
magic::add_message ctot "Total capacitance (pF)" $parameters
magic::add_entry l "Length (um)" $parameters
magic::add_entry w "Width (um)" $parameters
magic::add_entry nx "X Repeat" $parameters
magic::add_entry ny "Y Repeat" $parameters
if {[dict exists $parameters square]} {
magic::add_checkbox square "Square capacitor" $parameters
}
if {[dict exists $parameters bconnect]} {
magic::add_checkbox bconnect "Connect bottom plates in array" $parameters
}
if {[dict exists $parameters tconnect]} {
magic::add_checkbox tconnect "Connect top plates in array" $parameters
}
magic::add_dependency gf180mcu::cap_recalc $device gf180mcu l w val
# magic::add_checkbox dummy "Add dummy" $parameters
}
#ifdef MIM
proc gf180mcu::cap_mim_2p0fF_dialog {parameters} {
gf180mcu::cap_dialog cap_mim_2p0fF $parameters
}
#endif
#----------------------------------------------------------------
# Capacitor total capacitance computation
#----------------------------------------------------------------
proc gf180mcu::compute_ctot {parameters} {
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
set val [magic::spice2float $val]
set val [magic::3digitpastdecimal $val]
# Compute total capacitance (and convert fF to pF)
catch {set magic::ctot_val [expr (0.001 * $val * $nx * $ny)]}
}
#----------------------------------------------------------------
# Capacitor: Draw a single device
#----------------------------------------------------------------
proc gf180mcu::cap_device {parameters} {
# Epsilon for avoiding round-off errors
set eps 0.0005
# Set local default values if they are not in parameters
set cap_surround 0
set bot_surround 0
set top_surround 0
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
# Draw the device
pushbox
box size 0 0
pushbox
set hw [/ $w 2.0]
set hl [/ $l 2.0]
box grow e ${hw}um
box grow w ${hw}um
box grow n ${hl}um
box grow s ${hl}um
paint ${cap_type}
pushbox
box grow n -${cap_surround}um
box grow s -${cap_surround}um
box grow e -${cap_surround}um
box grow w -${cap_surround}um
paint ${cap_contact_type}
pushbox
box grow n ${top_surround}um
box grow s ${top_surround}um
box grow e ${top_surround}um
box grow w ${top_surround}um
paint ${top_type}
set cext [gf180mcu::getbox]
popbox
popbox
pushbox
box grow n ${bot_surround}um
box grow s ${bot_surround}um
box grow e ${bot_surround}um
box grow w ${bot_surround}um
paint ${bot_type}
property FIXED_BBOX [box values]
set cext [gf180mcu::unionbox $cext [gf180mcu::getbox]]
# Extend bottom metal under contact to right
box grow e ${end_spacing}um
set chw [/ ${contact_size} 2.0]
box grow e ${chw}um
box grow e ${end_surround}um
paint ${bot_type}
popbox
popbox
# Draw contact to right
pushbox
box move e ${hw}um
box move e ${bot_surround}um
box move e ${end_spacing}um
set cl [- [+ ${l} [* ${bot_surround} 2.0]] [* ${end_surround} 2.0]]
set cl [- ${cl} ${metal_surround}] ;# see below
set cext [gf180mcu::unionbox $cext [gf180mcu::draw_contact 0 ${cl} \
${end_surround} ${metal_surround} ${contact_size} \
${bot_type} ${top_contact_type} ${top_type} vert]]
popbox
popbox
return $cext
# cl shrinks top and bottom to accomodate larger bottom metal
# surround rule for contacts near a MiM cap. This should be its
# own variable, but metal_surround is sufficient.
}
#----------------------------------------------------------------
# Metal plate sandwich capacitor: Draw a single device
#----------------------------------------------------------------
proc gf180mcu::sandwich_cap_device {parameters} {
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
pushbox
box size 0 0
set hw [/ $w 2.0]
set hl [/ $l 2.0]
set cw [- [* $hw [/ 2.0 3]] [* $cont_surround 2.0]]
set cl [- [* $hl [/ 2.0 3]] [* $cont_surround 2.0]]
# plate capacitor defines layers p0, p1, etc.
for {set i 0} {$i < 20} {incr i} {
if {[catch {set layer [subst \$p${i}_type]}]} {break} ;# no more layers defined
pushbox
box grow e ${hw}um
box grow w ${hw}um
box grow n ${hl}um
box grow s ${hl}um
if {![catch {set shrink [subst \$p${i}_shrink]}]} {
box grow e -${shrink}um
box grow w -${shrink}um
box grow n -${shrink}um
box grow s -${shrink}um
set cutout_spacing [+ [* ${shrink} 2.0] [/ $via_size 2.0] $cont_surround]
} else {
set cutout_spacing 0
}
paint ${layer}
if {$i == 1} {
# Note that cap_type geometry is coincident with p1_type.
# Typically, this will define a layer that outputs as both
# poly and a capacitor definition layer.
if {[dict exists $parameters cap_type]} {
paint $cap_type
}
}
popbox
# Even layers connect at corners, odd layers connect at sides.
# Even layers cut out the sides, odd layers cut out the corners.
# Layer zero has no side contacts or cutout.
if {[% $i 2] == 0} {
set cornercmd paint
set cornersize $cutout_spacing
set sidecmd erase
set nssidelong [+ $cutout_spacing [/ $hw 3.0]]
set ewsidelong [+ $cutout_spacing [/ $hl 3.0]]
set sideshort $cutout_spacing
} else {
set cornercmd erase
set cornersize $cutout_spacing
set sidecmd paint
set nssidelong [/ $hw 3.0]
set ewsidelong [/ $hl 3.0]
set sideshort $cutout_spacing
}
if {$i > 0} {
pushbox
box move e ${hw}um
box grow n ${ewsidelong}um
box grow s ${ewsidelong}um
box grow w ${sideshort}um
${sidecmd} ${layer}
popbox
pushbox
box move n ${hl}um
box grow e ${nssidelong}um
box grow w ${nssidelong}um
box grow s ${sideshort}um
${sidecmd} ${layer}
popbox
pushbox
box move w ${hw}um
box grow n ${ewsidelong}um
box grow s ${ewsidelong}um
box grow e ${sideshort}um
${sidecmd} ${layer}
popbox
pushbox
box move s ${hl}um
box grow e ${nssidelong}um
box grow w ${nssidelong}um
box grow n ${sideshort}um
${sidecmd} ${layer}
popbox
pushbox
box move n ${hl}um
box move e ${hw}um
box grow s ${cornersize}um
box grow w ${cornersize}um
${cornercmd} ${layer}
popbox
pushbox
box move n ${hl}um
box move w ${hw}um
box grow s ${cornersize}um
box grow e ${cornersize}um
${cornercmd} ${layer}
popbox
pushbox
box move s ${hl}um
box move e ${hw}um
box grow n ${cornersize}um
box grow w ${cornersize}um
${cornercmd} ${layer}
popbox
pushbox
box move s ${hl}um
box move w ${hw}um
box grow n ${cornersize}um
box grow e ${cornersize}um
${cornercmd} ${layer}
popbox
}
}
# Draw contacts after all layers have been drawn, so that erasing
# layers does not affect the contacts.
for {set i 0} {$i < 20} {incr i} {
if {![catch {set contact [subst \$p${i}_contact_type]}]} {
set layer [subst \$p${i}_type]
set j [+ $i 1]
set toplayer [subst \$p${j}_type]
# Draw corner contacts
pushbox
box move e ${hw}um
box move n ${hl}um
gf180mcu::draw_contact 0 0 \
${cont_surround} ${cont_surround} ${via_size} \
${layer} ${contact} ${toplayer} full
popbox
pushbox
box move w ${hw}um
box move n ${hl}um
gf180mcu::draw_contact 0 0 \
${cont_surround} ${cont_surround} ${via_size} \
${layer} ${contact} ${toplayer} full
popbox
pushbox
box move e ${hw}um
box move s ${hl}um
gf180mcu::draw_contact 0 0 \
${cont_surround} ${cont_surround} ${via_size} \
${layer} ${contact} ${toplayer} full
popbox
pushbox
box move w ${hw}um
box move s ${hl}um
gf180mcu::draw_contact 0 0 \
${cont_surround} ${cont_surround} ${via_size} \
${layer} ${contact} ${toplayer} full
popbox
# Draw side contacts (except on poly)
if {$i > 0} {
pushbox
box move w ${hw}um
gf180mcu::draw_contact 0 ${cl} \
${cont_surround} ${cont_surround} ${via_size} \
${layer} ${contact} ${toplayer} full
popbox
pushbox
box move e ${hw}um
gf180mcu::draw_contact 0 ${cl} \
${cont_surround} ${cont_surround} ${via_size} \
${layer} ${contact} ${toplayer} full
popbox
pushbox
box move n ${hl}um
gf180mcu::draw_contact ${cw} 0 \
${cont_surround} ${cont_surround} ${via_size} \
${layer} ${contact} ${toplayer} full
popbox
pushbox
box move s ${hl}um
gf180mcu::draw_contact ${cw} 0 \
${cont_surround} ${cont_surround} ${via_size} \
${layer} ${contact} ${toplayer} full
popbox
}
} else {
break
}
}
popbox
# Bounding box is the same as the device length and width
set cext [list -$hw -$hl $hw $hl]
return $cext
}
#----------------------------------------------------------------
# Capacitor: Draw the tiled device
#----------------------------------------------------------------
proc gf180mcu::cap_draw {parameters} {
tech unlock *
# Set defaults if they are not in parameters
set coverlap 0 ;# overlap capacitors at contacts
set guard 0 ;# draw a guard ring
set sandwich 0 ;# this is not a plate sandwich capacitor
set cap_spacing 0 ;# abutted caps if spacing is zero
set wide_cap_spacing 0 ;# additional spacing for wide metal rule
set wide_cap_width 0
set end_spacing 0
set end_surround 0
set bot_surround 0
set top_metal_width 0
set bconnect 0 ;# connect bottom plates in array
set tconnect 0 ;# connect top plates in array
set top_type ""
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
# Normalize distance units to microns
set w [magic::spice2float $w]
set l [magic::spice2float $l]
pushbox
box values 0 0 0 0
# Determine the base device dimensions by drawing one device
# while all layers are locked (nothing drawn). This allows the
# base drawing routine to do complicated geometry without having
# to duplicate it here with calculations.
tech lock *
if {$sandwich == 1} {
set bbox [gf180mcu::sandwich_cap_device $parameters]
} else {
set bbox [gf180mcu::cap_device $parameters]
}
# puts stdout "Diagnostic: Device bounding box e $bbox (um)"
tech unlock *
set fw [- [lindex $bbox 2] [lindex $bbox 0]]
set fh [- [lindex $bbox 3] [lindex $bbox 1]]
set lw [+ [lindex $bbox 2] [lindex $bbox 0]]
set lh [+ [lindex $bbox 3] [lindex $bbox 1]]
set dwide 0
if {($fw >= $wide_cap_width) && ($fh >= $wide_cap_width)} {
set dwide $wide_cap_spacing
}
# Determine tile width and height (depends on overlap)
if {$coverlap == 0} {
set dy [+ $fh $cap_spacing $dwide]
} else {
# overlap at end contact
set dy [- $fh [+ $end_surround $end_surround $contact_size]]
}
# Contact is placed on right so spacing is determined by end_spacing.
set dx [+ $fw $end_spacing $dwide]
# Determine core width and height
set corex [+ [* [- $nx 1] $dx] $fw]
set corey [+ [* [- $ny 1] $dy] $fh]
set corellx [/ [+ [- $corex $fw] $lw] 2.0]
set corelly [/ [+ [- $corey $fh] $lh] 2.0]
if {$guard != 0} {
# Calculate guard ring size (measured to contact center)
set gx [+ $corex [* 2.0 [+ $cap_diff_spacing $diff_surround]] $contact_size]
set gy [+ $corey [* 2.0 [+ $end_spacing $diff_surround]] $contact_size]
# Draw the guard ring first.
gf180mcu::guard_ring $gx $gy $parameters
}
set top_metal_width [+ ${contact_size} ${end_surround} ${end_surround}]
set hmw [/ $top_metal_width 2.0]
set hdy [/ $dy 2.0]
set cdx [+ [/ ${w} 2.0] ${bot_surround} ${end_spacing}]
pushbox
box move w ${corellx}um
box move s ${corelly}um
for {set xp 0} {$xp < $nx} {incr xp} {
pushbox
for {set yp 0} {$yp < $ny} {incr yp} {
if {$sandwich == 1} {
gf180mcu::sandwich_cap_device $parameters
} else {
gf180mcu::cap_device $parameters
}
if {$ny > 1} {
pushbox
box grow e ${hmw}um
box grow w ${hmw}um
box grow n ${hdy}um
box grow s ${hdy}um
if {($top_type != "") && ($tconnect == 1)} {
paint ${top_type}
}
if {($top_type != "") && ($bconnect == 1)} {
box move e ${cdx}um
paint ${top_type}
}
popbox
}
box move n ${dy}um
}
popbox
box move e ${dx}um
}
popbox
popbox
tech revert
}
#----------------------------------------------------------------
#ifdef MIM
proc gf180mcu::cap_mim_2p0fF_draw {parameters} {
set newdict [dict create \
#ifdef METALS6
top_type mtp \
top_contact_type viatp \
bot_type m5 \
#endif
#ifdef METALS5
top_type m5 \
top_contact_type via4 \
bot_type m4 \
#endif
#ifdef METALS4
top_type m4 \
top_contact_type via3 \
bot_type m3 \
#endif
#ifdef METALS3
top_type m3 \
top_contact_type via2 \
bot_type m2 \
#endif
cap_type mimcap \
cap_contact_type mimcc \
bot_surround 0.6 \
cap_spacing 0.6 \
cap_surround 0.4 \
top_surround 0.0 \
end_surround 0.31 \
#ifdef THICKMET3P0
metal_surround 0.11 \
contact_size 1.80 \
end_spacing 1.28 \
#elseif (THICKMET1P1 || THICKMET0P9)
metal_surround 0.05 \
contact_size 0.44 \
end_spacing 0.67 \
#else
metal_surround 0.05 \
contact_size 0.36 \
end_spacing 0.60 \
#endif (!(THICKMET3P0 || THICKMET1P1 || THICKMET0P9))
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::cap_draw $drawdict]
}
#endif (MIM)
#----------------------------------------------------------------
# capacitor: Check device parameters for out-of-bounds values
#----------------------------------------------------------------
proc gf180mcu::cap_check {parameters} {
# In case wmax and/or lmax are undefined
set lmax 0
set wmax 0
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
# Normalize distance units to microns
set l [magic::spice2float $l]
set l [magic::3digitpastdecimal $l]
set w [magic::spice2float $w]
set w [magic::3digitpastdecimal $w]
set val [magic::spice2float $val]
set carea [magic::spice2float $carea]
set cperi [magic::spice2float $cperi]
set dc [magic::spice2float $dc]
if {$square == 1} {
# Calculate L and W from value
set a $carea
set b [expr $cperi * 4]
set c [expr -4 * $dc - $val]
set l [expr ((-$b + sqrt($b * $b - (4 * $a * $c))) / (2 * $a))]
dict set parameters l [magic::float2spice $l]
set w $l
dict set parameters w [magic::float2spice $w]
} elseif {$l == 0} {
# Calculate L from W and value
set l [expr (($val + 4 * $dc - 2 * $w * $cperi) / ($w * $carea + 2 * $cperi))]
dict set parameters l [magic::float2spice $l]
} elseif {$w == 0} {
# Calculate W from L and value
set w [expr (($val + 4 * $dc - 2 * $l * $cperi) / ($l * $carea + 2 * $cperi))]
dict set parameters w [magic::float2spice $w]
}
if {$w < $wmin} {
puts stderr "Capacitor width must be >= $wmin"
dict set parameters w $wmin
set w $wmin
}
if {$l < $lmin} {
puts stderr "Capacitor length must be >= $lmin"
dict set parameters l $lmin
set l $lmin
}
if {($wmax > 0) && ($w > $wmax)} {
puts stderr "Capacitor width must be <= $wmax"
dict set parameters w $wmax
set w $wmax
}
if {($lmax > 0) && ($l > $lmax)} {
puts stderr "Capacitor length must be <= $lmax"
dict set parameters l $lmax
set l $lmax
}
# Calculate value from L and W
set cval [expr ($l * $w * $carea + 2 * ($l + $w) * $cperi - 4 * $dc)]
dict set parameters val [magic::float2spice $cval]
gf180mcu::compute_ctot $parameters
return $parameters
}
#ifdef MIM
proc gf180mcu::cap_mim_2p0fF_check {parameters} {
return [gf180mcu::cap_check $parameters]
}
#endif
#----------------------------------------------------------------
# Drawn resistors
#----------------------------------------------------------------
#----------------------------------------------------------------
# Resistor defaults:
#----------------------------------------------------------------
# User editable values:
#
# val Resistor value in ohms
# w Width
# l Length
# t Number of turns
# m Number devices in Y
# nx Number devices in X
# snake Use snake geometry
# dummy Flag to mark addition of dummy resistor
#
# Non-user editable values:
#
# wmin Minimum allowed width
# lmin Minimum allowed length
# rho Resistance in ohms per square
# dw Delta width
# term Resistance per terminal
# sterm Additional resistance per terminal for snake geometry
#----------------------------------------------------------------
#----------------------------------------------------------------
# rnw: Specify all user-editable default values and those
# needed by nwell_check
#----------------------------------------------------------------
proc gf180mcu::nwell_defaults {} {
return {w 2.000 l 10.00 m 1 nx 1 wmin 2.000 lmin 2.00 \
rho 1680 val 8400 dummy 0 dw 0.25 term 1.0 snake 0 \
glc 1 grc 1 gtc 0 gbc 0 roverlap 0 endcov 100 \
full_metal 1}
}
#----------------------------------------------------------------
# rpp1: Specify all user-editable default values and those
# needed by rp1_check
#----------------------------------------------------------------
proc gf180mcu::ppolyf_u_defaults {} {
return {w 0.80 l 1.00 m 1 nx 1 wmin 0.80 lmin 1.00 \
rho 315 val 394 dummy 0 dw 0.07 term 0.0 \
sterm 0.0 caplen 0.4 snake 0 \
glc 1 grc 1 gtc 0 gbc 0 roverlap 0 endcov 100 \
full_metal 1}
}
proc gf180mcu::npolyf_u_defaults {} {
return {w 0.80 l 1.00 m 1 nx 1 wmin 0.80 lmin 1.00 \
rho 300 val 375 dummy 0 dw 0.09 term 0.0 \
sterm 0.0 caplen 0.4 snake 0 \
glc 1 grc 1 gtc 0 gbc 0 roverlap 0 endcov 100 \
full_metal 1}
}
#----------------------------------------------------------------
# rpp1s: Specify all user-editable default values and those
# needed by rp1_check
#----------------------------------------------------------------
proc gf180mcu::ppolyf_s_defaults {} {
return {w 0.80 l 1.00 m 1 nx 1 wmin 0.80 lmin 1.00 \
rho 7 val 8.75 dummy 0 dw 0.01 term 0.0 \
sterm 0.0 caplen 0.4 snake 0 \
glc 1 grc 1 gtc 0 gbc 0 roverlap 0 endcov 100 \
full_metal 1}
}
proc gf180mcu::npolyf_s_defaults {} {
return {w 0.80 l 1.00 m 1 nx 1 wmin 0.80 lmin 1.00 \
rho 7 val 8.75 dummy 0 dw 0.01 term 0.0 \
sterm 0.0 caplen 0.4 snake 0 \
glc 1 grc 1 gtc 0 gbc 0 roverlap 0 endcov 100 \
full_metal 1}
}
#----------------------------------------------------------------
# nplus_u: Specify all user-editable default values and those
# needed by nplus_u_check
#----------------------------------------------------------------
proc gf180mcu::nplus_u_defaults {} {
return {w 1.000 l 1.000 m 1 nx 1 wmin 1.00 lmin 1.00 \
rho 85 val 85.0 dummy 0 dw 0.05 term 0.0 \
sterm 0.0 caplen 0.4 snake 0 \
glc 1 grc 1 gtc 0 gbc 0 roverlap 0 endcov 100 \
full_metal 1}
}
#----------------------------------------------------------------
# pplus_u: Specify all user-editable default values and those
# needed by pplus_u_check
#----------------------------------------------------------------
proc gf180mcu::pplus_u_defaults {} {
return {w 1.000 l 1.000 m 1 nx 1 wmin 1.00 lmin 1.00 \
rho 128 val 128.0 dummy 0 dw 0.02 term 0.0 \
sterm 0.0 caplen 0.60 snake 0 \
glc 1 grc 1 gtc 0 gbc 0 roverlap 0 endcov 100 \
full_metal 1}
}
#----------------------------------------------------------------
# rm1: Specify all user-editable default values and those needed
# by rm1_check
#----------------------------------------------------------------
proc gf180mcu::rm1_defaults {} {
return {w 0.160 l 0.160 m 1 nx 1 wmin 0.16 lmin 0.16 \
rho 0.076 val 0.076 dummy 0 dw 0.0 term 0.0 \
roverlap 0}
}
#----------------------------------------------------------------
# rm2: Specify all user-editable default values and those needed
# by rm2_check
#----------------------------------------------------------------
proc gf180mcu::rm2_defaults {} {
return {w 0.200 l 0.200 m 1 nx 1 wmin 0.20 lmin 0.20 \
rho 0.053 val 0.053 dummy 0 dw 0.0 term 0.0 \
roverlap 0}
}
#----------------------------------------------------------------
# Additional entries for rm3, rm4, rm5, and rmtp, depending on
# the back-end metal stack.
#----------------------------------------------------------------
#ifdef METALS3 || METALS4 || METALS5 || METALS6
proc gf180mcu::rm3_defaults {} {
return {w 0.200 l 0.200 m 1 nx 1 wmin 0.20 lmin 0.20 \
rho 0.053 val 0.053 dummy 0 dw 0.0 term 0.0 \
roverlap 0}
}
#endif (METALS3 || METALS4 || METALS5 || METALS6)
#ifdef METALS4 || METALS5 || METALS6
proc gf180mcu::rm4_defaults {} {
return {w 0.200 l 0.200 m 1 nx 1 wmin 0.20 lmin 0.20 \
rho 0.053 val 0.053 dummy 0 dw 0.0 term 0.0 \
roverlap 0}
}
#endif (METALS4 || METALS5 || METALS6)
#ifdef METALS5 || METALS6
proc gf180mcu::rm5_defaults {} {
return {w 0.200 l 0.200 m 1 nx 1 wmin 0.20 lmin 0.20 \
rho 0.053 val 0.053 dummy 0 dw 0.0 term 0.0 \
roverlap 0}
}
#endif (METALS5 || METALS6)
#ifdef METALS6
proc gf180mcu::rmtp_defaults {} {
return {w 0.200 l 0.200 m 1 nx 1 wmin 0.20 lmin 0.20 \
rho 0.053 val 0.053 dummy 0 dw 0.0 term 0.0 \
roverlap 0}
}
#endif (METALS6)
#ifdef HRPOLY1K
#----------------------------------------------------------------
# ppolyf_u_1k: Specify all user-editable default values and those
# needed by npolyf_u_check
#----------------------------------------------------------------
proc gf180mcu::ppolyf_u_1k_defaults {} {
return {w 1.000 l 2.000 m 1 nx 1 wmin 1.000 lmin 1.000 \
rho 1000 val 2000 dummy 0 dw 0.0 term 0.0 \
sterm 0.0 caplen 0.4 snake 0 \
glc 1 grc 1 gtc 0 gbc 0 roverlap 0 endcov 100 \
full_metal 1 \
compatible {ppolyf_u_1k ppolyf_u_1k_6p0}}
}
proc gf180mcu::ppolyf_u_1k_6p0_defaults {} {
return {w 1.000 l 2.000 m 1 nx 1 wmin 1.000 lmin 1.000 \
rho 1000 val 2000 dummy 0 dw 0.0 term 0.0 \
sterm 0.0 caplen 0.4 snake 0 \
glc 1 grc 1 gtc 0 gbc 0 roverlap 0 endcov 100 \
full_metal 1 \
compatible {ppolyf_u_1k ppolyf_u_1k_6p0}}
}
#endif (HRPOLY1K)
#----------------------------------------------------------------
# resistor: Conversion from SPICE netlist parameters to toolkit
#----------------------------------------------------------------
proc gf180mcu::res_convert {parameters} {
set pdkparams [dict create]
dict for {key value} $parameters {
set canonkey $key
switch -nocase $key {
r_length -
r_width -
l -
w {
switch -nocase $key {
r_length {
set canonkey l
}
r_width {
set canonkey w
}
}
# Length and width are converted to units of microns
set value [magic::spice2float $value]
set value [expr $value * 1e6]
set value [magic::3digitpastdecimal $value]
dict set pdkparams [string tolower $canonkey] $value
}
}
}
return $pdkparams
}
#----------------------------------------------------------------
proc gf180mcu::nwell_convert {parameters} {
return [gf180mcu::res_convert $parameters]
}
proc gf180mcu::ppolyf_u_convert {parameters} {
return [gf180mcu::res_convert $parameters]
}
proc gf180mcu::ppolyf_s_convert {parameters} {
return [gf180mcu::res_convert $parameters]
}
proc gf180mcu::npolyf_s_convert {parameters} {
return [gf180mcu::res_convert $parameters]
}
proc gf180mcu::npolyf_u_convert {parameters} {
return [gf180mcu::res_convert $parameters]
}
proc gf180mcu::nplus_u_convert {parameters} {
return [gf180mcu::res_convert $parameters]
}
proc gf180mcu::pplus_u_convert {parameters} {
return [gf180mcu::res_convert $parameters]
}
proc gf180mcu::rm1_convert {parameters} {
return [gf180mcu::res_convert $parameters]
}
proc gf180mcu::rm2_convert {parameters} {
return [gf180mcu::res_convert $parameters]
}
#ifdef METALS3 || METALS4 || METALS5 || METALS6
proc gf180mcu::rm3_convert {parameters} {
return [gf180mcu::res_convert $parameters]
}
#endif (METALS3 || METALS4 || METALS5 || METALS6)
#ifdef METALS4 || METALS5 || METALS6
proc gf180mcu::rm4_convert {parameters} {
return [gf180mcu::res_convert $parameters]
}
#endif (METALS4 || METALS5 || METALS6)
#ifdef METALS5 || METALS6
proc gf180mcu::rm5_convert {parameters} {
return [gf180mcu::res_convert $parameters]
}
#endif (METALS5 || METALS6)
#ifdef METALS6
proc gf180mcu::rmtp_convert {parameters} {
return [gf180mcu::res_convert $parameters]
}
#endif (METALS6)
#ifdef HRPOLY1K
proc gf180mcu::ppolyf_u_1k_convert {parameters} {
return [gf180mcu::res_convert $parameters]
}
proc gf180mcu::ppolyf_u_1k_6p0_convert {parameters} {
return [gf180mcu::res_convert $parameters]
}
#endif (HRPOLY1K)
#----------------------------------------------------------------
# resistor: Interactively specifies the fixed layout parameters
#----------------------------------------------------------------
proc gf180mcu::res_dialog {device parameters} {
# Editable fields: w, l, t, nx, m, val
# Checked fields:
magic::add_entry val "Value (ohms)" $parameters
if {[dict exists $parameters snake]} {
gf180mcu::compute_ltot $parameters
magic::add_message ltot "Total length (um)" $parameters
}
magic::add_entry l "Length (um)" $parameters
magic::add_entry w "Width (um)" $parameters
magic::add_entry nx "X Repeat" $parameters
magic::add_entry m "Y Repeat" $parameters
if {[dict exists $parameters endcov]} {
magic::add_entry endcov "End contact coverage (%)" $parameters
}
if {[dict exists $parameters compatible]} {
set sellist [dict get $parameters compatible]
# Reserved word "gencell" has special behavior to change the
# underlying device type
dict set parameters gencell $device
magic::add_selectlist gencell "Device type" $sellist $parameters
}
# magic::add_checkbox dummy "Add dummy" $parameters
if {[dict exists $parameters snake]} {
magic::add_checkbox snake "Use snake geometry" $parameters
}
if {[dict exists $parameters roverlap]} {
if {[dict exists $parameters endcov]} {
magic::add_checkbox roverlap "Overlap at end contact" $parameters
} else {
magic::add_checkbox roverlap "Overlap at ends" $parameters
}
}
magic::add_checkbox full_metal "Full metal guard ring" $parameters
if {[dict exists $parameters glc]} {
magic::add_checkbox glc "Add left guard ring contact" $parameters
}
if {[dict exists $parameters grc]} {
magic::add_checkbox grc "Add right guard ring contact" $parameters
}
if {[dict exists $parameters gtc]} {
magic::add_checkbox gtc "Add top guard ring contact" $parameters
}
if {[dict exists $parameters gbc]} {
magic::add_checkbox gbc "Add bottom guard ring contact" $parameters
}
if {[dict exists $parameters snake]} {
magic::add_dependency gf180mcu::res_recalc $device gf180mcu l w val nx snake
} else {
magic::add_dependency gf180mcu::res_recalc $device gf180mcu l w val nx
}
}
#----------------------------------------------------------------
proc gf180mcu::nwell_dialog {parameters} {
gf180mcu::res_dialog nwell $parameters
}
proc gf180mcu::ppolyf_u_dialog {parameters} {
gf180mcu::res_dialog ppolyf_u $parameters
}
proc gf180mcu::npolyf_u_dialog {parameters} {
gf180mcu::res_dialog npolyf_u $parameters
}
proc gf180mcu::ppolyf_s_dialog {parameters} {
gf180mcu::res_dialog ppolyf_s $parameters
}
proc gf180mcu::npolyf_s_dialog {parameters} {
gf180mcu::res_dialog npolyf_s $parameters
}
proc gf180mcu::nplus_u_dialog {parameters} {
gf180mcu::res_dialog nplus_u $parameters
}
proc gf180mcu::pplus_u_dialog {parameters} {
gf180mcu::res_dialog pplus_u $parameters
}
proc gf180mcu::nplus_u_3p3_dialog {parameters} {
gf180mcu::res_dialog nplus_u_3p3 $parameters
}
proc gf180mcu::pplus_u_3p3_dialog {parameters} {
gf180mcu::res_dialog pplus_u_3p3 $parameters
}
proc gf180mcu::rm1_dialog {parameters} {
gf180mcu::res_dialog rm1 $parameters
}
proc gf180mcu::rm2_dialog {parameters} {
gf180mcu::res_dialog rm2 $parameters
}
#ifdef METALS3 || METALS4 || METALS5 || METALS6
proc gf180mcu::rm3_dialog {parameters} {
gf180mcu::res_dialog rm3 $parameters
}
#endif (METALS3 || METALS4 || METALS5 || METALS6)
#ifdef METALS4 || METALS5 || METALS6
proc gf180mcu::rm4_dialog {parameters} {
gf180mcu::res_dialog rm4 $parameters
}
#endif (METALS4 || METALS5 || METALS6)
#ifdef METALS5 || METALS6
proc gf180mcu::rm5_dialog {parameters} {
gf180mcu::res_dialog rm5 $parameters
}
#endif (METALS5 || METALS6)
#ifdef METALS6
proc gf180mcu::rmtp_dialog {parameters} {
gf180mcu::res_dialog rmtp $parameters
}
#endif (METALS6)
#ifdef HRPOLY1K
proc gf180mcu::ppolyf_u_1k_dialog {parameters} {
gf180mcu::res_dialog ppolyf_u_1k $parameters
}
proc gf180mcu::ppolyf_u_1k_6p0_dialog {parameters} {
gf180mcu::res_dialog ppolyf_u_1k_6p0 $parameters
}
#endif (HRPOLY1K)
#----------------------------------------------------------------
# Resistor: Draw a single device in straight geometry
#----------------------------------------------------------------
proc gf180mcu::res_device {parameters} {
# Epsilon for avoiding round-off errors
set eps 0.0005
# Set local default values if they are not in parameters
set endcov 0 ;# percent coverage of end contacts
set well_res_overlap 0 ;# not a well resistor
set end_contact_type "" ;# no contacts for metal resistors
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
# Draw the resistor and endcaps
pushbox
box size 0 0
pushbox
set hw [/ $w 2.0]
set hl [/ $l 2.0]
box grow n ${hl}um
box grow s ${hl}um
box grow e ${hw}um
box grow w ${hw}um
pushbox
box grow n ${res_to_endcont}um
box grow s ${res_to_endcont}um
if {$well_res_overlap > 0} {
set well_extend [+ ${well_res_overlap} [/ ${contact_size} 2.0] ${end_surround}]
box grow n ${well_extend}um
box grow s ${well_extend}um
paint ${well_res_type}
} else {
paint ${end_type}
}
set cext [gf180mcu::getbox]
popbox
if {$well_res_overlap > 0} {
erase ${well_res_type}
} else {
erase ${end_type}
}
paint ${res_type}
popbox
# Reduce contact sizes by (end type) surround so that
# the contact area edges match the device type width.
# (Minimum dimensions will be enforced by the contact drawing routine)
set epl [- ${w} [* ${end_surround} 2]] ;# end contact width
# Reduce end material size for well resistor types
if {$well_res_overlap > 0} {
set epl [- ${epl} [* ${well_res_overlap} 2]]
}
# Reduce by coverage percentage unless overlapping at contacts
if {(${roverlap} == 0) && (${endcov} > 0)} {
set cpl [* ${epl} [/ ${endcov} 100.0]]
} else {
set cpl $epl
}
set hepl [+ [/ ${epl} 2.0] ${end_surround}]
set hesz [+ [/ ${contact_size} 2.0] ${end_surround}]
# Top end material & contact
pushbox
box move n ${hl}um
box move n ${res_to_endcont}um
pushbox
box size 0 0
box grow n ${hesz}um
box grow s ${hesz}um
box grow e ${hepl}um
box grow w ${hepl}um
paint ${end_type}
set cext [gf180mcu::unionbox $cext [gf180mcu::getbox]]
popbox
if {${end_contact_type} != ""} {
set cext [gf180mcu::unionbox $cext [gf180mcu::draw_contact ${cpl} 0 \
${end_surround} ${metal_surround} ${contact_size} \
${end_type} ${end_contact_type} m1 horz]]
}
popbox
# Bottom end material & contact
pushbox
box move s ${hl}um
box move s ${res_to_endcont}um
pushbox
box size 0 0
box grow n ${hesz}um
box grow s ${hesz}um
box grow e ${hepl}um
box grow w ${hepl}um
paint ${end_type}
set cext [gf180mcu::unionbox $cext [gf180mcu::getbox]]
popbox
if {${end_contact_type} != ""} {
set cext [gf180mcu::unionbox $cext [gf180mcu::draw_contact ${cpl} 0 \
${end_surround} ${metal_surround} ${contact_size} \
${end_type} ${end_contact_type} m1 horz]]
}
popbox
popbox
return $cext
}
#----------------------------------------------------------------
# Resistor: Draw a single device in snake geometry
#----------------------------------------------------------------
proc gf180mcu::res_snake_device {nf parameters} {
# nf is the number of fingers of the snake geometry
# Epsilon for avoiding round-off errors
set eps 0.0005
# Set local default values if they are not in parameters
set endcov 100 ;# percent coverage of end contacts
set well_res_overlap 0 ;# not a well resistor
set end_contact_type "" ;# no contacts for metal resistors
set mask_clearance 0 ;# additional length to clear mask
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
# Compute half width and length
set hw [/ $w 2.0]
set hl [/ $l 2.0]
# Reduce contact sizes by (end type) surround so that
# the contact area edges match the device type width.
# (Minimum dimensions will be enforced by the contact drawing routine)
set epl [- ${w} [* ${end_surround} 2]] ;# end contact width
# Reduce contact size for well resistor types
if {$well_res_overlap > 0} {
set epl [- ${epl} [* ${well_res_overlap} 2]]
}
# Reduce contact part of end by coverage percentage
if {${endcov} > 0} {
set cpl [* ${epl} [/ ${endcov} 100.0]]
} else {
set cpl $epl
}
set hepl [+ [/ ${epl} 2.0] ${end_surround}]
set hesz [+ [/ ${contact_size} 2.0] ${end_surround}]
pushbox
box size 0 0 ;# Position is taken from caller
# Front end contact (always bottom)
pushbox
box move s ${hl}um
pushbox
box move s ${mask_clearance}um
box move s ${res_to_endcont}um
pushbox
box size 0 0
box grow n ${hesz}um
box grow s ${hesz}um
box grow e ${hepl}um
box grow w ${hepl}um
paint ${end_type}
set cext [gf180mcu::getbox]
popbox
if {${end_contact_type} != ""} {
set cext [gf180mcu::draw_contact ${cpl} 0 \
${end_surround} ${metal_surround} ${contact_size} \
${end_type} ${end_contact_type} m1 horz]
}
popbox
# Draw portion between resistor end and contact.
box grow e ${hw}um
box grow w ${hw}um
pushbox
box grow s ${mask_clearance}um
paint ${res_type}
popbox
box move s ${mask_clearance}um
box grow s ${res_to_endcont}um
if {$well_res_overlap > 0} {
set well_extend [+ ${well_res_overlap} [/ ${contact_size} 2.0] ${end_surround}]
box grow s ${well_extend}um
paint ${well_res_type}
} else {
paint ${end_type}
}
set cext [gf180mcu::unionbox $cext [gf180mcu::getbox]]
popbox
# Draw the resistor and endcaps
pushbox
box grow n ${hl}um
box grow s ${hl}um
box grow e ${hw}um
box grow w ${hw}um
# Capture these extents in the bounding box in case both contacts
# are on one side.
set cext [gf180mcu::unionbox $cext [gf180mcu::getbox]]
set deltax [+ ${res_spacing} ${w}]
set deltay [- ${l} ${w}]
for {set i 0} {$i < [- $nf 1]} {incr i} {
paint ${res_type}
pushbox
if {[% $i 2] == 0} {
box move n ${deltay}um
}
box height ${w}um
box width ${deltax}um
paint ${res_type}
popbox
box move e ${deltax}um
}
paint ${res_type}
# Capture these extents in the bounding box
set cext [gf180mcu::unionbox $cext [gf180mcu::getbox]]
popbox
# Move box to last finger
set lastf [* [- $nf 1] $deltax]
box move e ${lastf}um
# Back-end contact (top or bottom, depending if odd or even turns)
pushbox
if {[% $nf 2] == 1} {
set dir n
} else {
set dir s
}
box move $dir ${hl}um
pushbox
box move $dir ${mask_clearance}um
box move $dir ${res_to_endcont}um
pushbox
box size 0 0
box grow n ${hesz}um
box grow s ${hesz}um
box grow e ${hepl}um
box grow w ${hepl}um
paint ${end_type}
set cext [gf180mcu::unionbox $cext [gf180mcu::getbox]]
popbox
if {${end_contact_type} != ""} {
set cext [gf180mcu::unionbox $cext [gf180mcu::draw_contact ${cpl} 0 \
${end_surround} ${metal_surround} ${contact_size} \
${end_type} ${end_contact_type} m1 horz]]
}
popbox
# Draw portion between resistor end and contact.
box grow e ${hw}um
box grow w ${hw}um
pushbox
box grow $dir ${mask_clearance}um
paint ${res_type}
popbox
box move $dir ${mask_clearance}um
box grow $dir ${res_to_endcont}um
if {$well_res_overlap > 0} {
set well_extend [+ ${well_res_overlap} [/ ${contact_size} 2.0] ${end_surround}]
box grow $dir ${well_extend}um
paint ${well_res_type}
} else {
paint ${end_type}
}
popbox
popbox
return $cext
}
#----------------------------------------------------------------
# Resistor: Draw the tiled device
#----------------------------------------------------------------
proc gf180mcu::res_draw {parameters} {
tech unlock *
# Set defaults if they are not in parameters
set snake 0 ;# some resistors don't allow snake geometry
set roverlap 0 ;# overlap resistors at contacts
set guard 1 ;# draw a guard ring
set overlap_compress 0 ;# special Y distance compression
set well_res_overlap 0 ;# additional well extension behind contact
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
# For devices where inter-device space is smaller than device-to-guard ring
if {![dict exists $parameters end_to_end_space]} {
set end_to_end_space $end_spacing
}
# Normalize distance units to microns
set w [magic::spice2float $w]
set l [magic::spice2float $l]
pushbox
box values 0 0 0 0
# Determine the base device dimensions by drawing one device
# while all layers are locked (nothing drawn). This allows the
# base drawing routine to do complicated geometry without having
# to duplicate it here with calculations.
tech lock *
set nf $nx
if {($snake == 1) && ($nx == 1)} {set snake 0}
if {$snake == 1} {
set bbox [gf180mcu::res_snake_device $nf $parameters]
set nx 1
} else {
set bbox [gf180mcu::res_device $parameters]
}
# puts stdout "Diagnostic: Device bounding box e $bbox (um)"
tech unlock *
set fw [- [lindex $bbox 2] [lindex $bbox 0]]
set fh [- [lindex $bbox 3] [lindex $bbox 1]]
set lw [+ [lindex $bbox 2] [lindex $bbox 0]]
set lh [+ [lindex $bbox 3] [lindex $bbox 1]]
# Determine tile width and height (depends on overlap)
# Snake resistors cannot overlap.
# However, snake resistors with an odd number of fingers can
# compress the space if overlap_compress is defined
if {($roverlap == 1) && ($snake == 1) && ([% $nf 2] == 1) && ($m > 1)} {
set dy [- $fh $overlap_compress]
} elseif {($roverlap == 0) || ($snake == 1)} {
set dy [+ $fh $end_to_end_space]
} else {
# overlap poly
set dy [- $fh [+ [* [+ $end_surround $well_res_overlap] 2.0] $contact_size]]
}
set dx [+ $fw $res_spacing]
# Determine core width and height
set corex [+ [* [- $nx 1] $dx] $fw]
set corey [+ [* [- $m 1] $dy] $fh]
set corellx [/ [+ [- $corex $fw] $lw] 2.0]
set corelly [/ [+ [- $corey $fh] $lh] 2.0]
if {$guard != 0} {
# Calculate guard ring size (measured to contact center)
set gx [+ $corex [* 2.0 [+ $res_diff_spacing $diff_surround]] $contact_size]
set gy [+ $corey [* 2.0 [+ $end_spacing $diff_surround]] $contact_size]
# Draw the guard ring first, because well resistors are on the substrate plane
gf180mcu::guard_ring $gx $gy $parameters
}
pushbox
box move w ${corellx}um
box move s ${corelly}um
# puts "Device position at = [gf180mcu::getbox]"
for {set xp 0} {$xp < $nx} {incr xp} {
pushbox
for {set yp 0} {$yp < $m} {incr yp} {
if {$snake == 1} {
gf180mcu::res_snake_device $nf $parameters
} else {
gf180mcu::res_device $parameters
}
box move n ${dy}um
}
popbox
box move e ${dx}um
}
popbox
popbox
tech revert
}
#----------------------------------------------------------------
proc gf180mcu::ppolyf_u_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
set newdict [dict create \
res_type rpp \
end_type poly \
end_contact_type pc \
plus_diff_type nsd \
plus_contact_type nsc \
sub_type nwell \
end_surround $poly_surround \
end_spacing 0.44 \
end_to_end_space 0.52 \
res_to_endcont $sblk_to_cont \
res_spacing $polyres_spacing \
res_diff_spacing 0.44 \
mask_clearance 0.52 \
overlap_compress 0.36 \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::res_draw $drawdict]
}
#----------------------------------------------------------------
proc gf180mcu::npolyf_u_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
set newdict [dict create \
res_type rnp \
end_type poly \
end_contact_type pc \
plus_diff_type psd \
plus_contact_type psc \
sub_type pwell \
end_surround $poly_surround \
end_spacing 0.44 \
end_to_end_space 0.52 \
res_to_endcont $sblk_to_cont \
res_spacing $polyres_spacing \
res_diff_spacing 0.44 \
mask_clearance 0.52 \
overlap_compress 0.36 \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::res_draw $drawdict]
}
#----------------------------------------------------------------
proc gf180mcu::ppolyf_s_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
# Distance from resistor to end contact is different between straight
# and snake geometry.
set res_to_endcont [+ $poly_surround [/ $contact_size 2.0]]
if {[dict exists $parameters snake]} {
if {[dict get $parameters snake] == 1} {
set res_to_endcont [+ $res_to_endcont $poly_spacing]
}
}
set newdict [dict create \
res_type rpps \
end_type poly \
end_contact_type pc \
plus_diff_type nsd \
plus_contact_type nsc \
sub_type nwell \
end_surround $poly_surround \
end_spacing 0.28 \
end_to_end_space 0.41 \
res_to_endcont $res_to_endcont \
res_spacing $polyres_spacing \
res_diff_spacing 0.41 \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::res_draw $drawdict]
}
#----------------------------------------------------------------
proc gf180mcu::npolyf_s_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
# Distance from resistor to end contact is different between straight
# and snake geometry.
set res_to_endcont [+ $poly_surround [/ $contact_size 2.0]]
if {[dict exists $parameters snake]} {
if {[dict get $parameters snake] == 1} {
set res_to_endcont [+ $res_to_endcont $poly_spacing]
}
}
set newdict [dict create \
res_type rnps \
end_type poly \
end_contact_type pc \
plus_diff_type nsd \
plus_contact_type nsc \
sub_type nwell \
end_surround $poly_surround \
end_spacing 0.28 \
end_to_end_space 0.41 \
res_to_endcont $res_to_endcont \
res_spacing $polyres_spacing \
res_diff_spacing 0.28 \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::res_draw $drawdict]
}
#----------------------------------------------------------------
proc gf180mcu::nplus_u_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
set newdict [dict create \
res_type rnd \
end_type ndiff \
end_contact_type ndc \
plus_diff_type psd \
plus_contact_type psc \
sub_type pwell \
end_surround $diff_surround \
end_spacing 0.45 \
res_to_endcont 0.45 \
res_spacing $diffres_spacing \
res_diff_spacing 0.45 \
mask_clearance 0.22 \
overlap_compress 0.36 \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::res_draw $drawdict]
}
#----------------------------------------------------------------
proc gf180mcu::pplus_u_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
set newdict [dict create \
res_type rpd \
end_type pdiff \
end_contact_type pdc \
plus_diff_type nsd \
plus_contact_type nsc \
sub_type nwell \
end_surround $diff_surround \
end_spacing 0.45 \
res_to_endcont 0.45 \
res_spacing $diffres_spacing \
res_diff_spacing 0.45 \
mask_clearance 0.22 \
overlap_compress 0.36 \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::res_draw $drawdict]
}
#----------------------------------------------------------------
proc gf180mcu::nwell_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
set newdict [dict create \
well_res_type nwell \
res_type rnw \
end_type nsd \
end_contact_type nsc \
plus_diff_type psd \
plus_contact_type psc \
sub_type pwell \
end_surround $diff_surround \
end_spacing 1.2 \
overlap_compress -0.84 \
res_to_endcont 0.22 \
res_spacing 1.2 \
res_diff_spacing 0.28 \
well_res_overlap 0.24 \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::res_draw $drawdict]
}
#----------------------------------------------------------------
#ifdef HRPOLY1K
proc gf180mcu::ppolyf_u_1k_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
set newdict [dict create \
res_type hires \
end_type poly \
end_contact_type pc \
plus_diff_type psd \
plus_contact_type psc \
sub_type pwell \
end_surround $poly_surround \
end_spacing 0.7 \
res_to_endcont 0.43 \
res_spacing $polyres_spacing \
res_diff_spacing 0.7 \
mask_clearance 0.22 \
overlap_compress 0.36 \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::res_draw $drawdict]
}
proc gf180mcu::ppolyf_u_1k_6p0_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
set newdict [dict create \
diff_poly_space 0.30 \
diff_gate_space 0.30 \
diff_spacing 0.36 \
res_type mvhires \
end_type poly \
end_contact_type pc \
plus_diff_type mvpsd \
plus_contact_type mvpsc \
sub_type pwell \
sub_surround 0.16 \
end_surround $poly_surround \
end_spacing 0.7 \
res_to_endcont 0.43 \
res_spacing $polyres_spacing \
res_diff_spacing 0.7 \
mask_clearance 0.22 \
overlap_compress 0.36 \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::res_draw $drawdict]
}
#endif (HRPOLY1K)
#----------------------------------------------------------------
proc gf180mcu::rm1_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
set newdict [dict create \
guard 0 \
res_type rm1 \
end_type m1 \
end_surround 0.0 \
end_spacing 0.0 \
res_to_endcont 0.2 \
res_spacing $metal_spacing \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::res_draw $drawdict]
}
#----------------------------------------------------------------
proc gf180mcu::rm2_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
set newdict [dict create \
guard 0 \
res_type rm2 \
end_type m2 \
end_surround 0.0 \
end_spacing 0.0 \
res_to_endcont 0.2 \
res_spacing $mmetal_spacing \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::res_draw $drawdict]
}
#----------------------------------------------------------------
#ifdef METALS3 || METALS4 || METALS5 || METALS6
proc gf180mcu::rm3_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
set newdict [dict create \
guard 0 \
res_type rm3 \
end_type m3 \
end_surround 0.0 \
end_spacing 0.0 \
res_to_endcont 0.2 \
res_spacing $mmetal_spacing \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::res_draw $drawdict]
}
#----------------------------------------------------------------
#endif (METALS3 || METALS4 || METALS5 || METALS6)
#ifdef METALS4 || METALS5 || METALS6
proc gf180mcu::rm4_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
set newdict [dict create \
guard 0 \
res_type rm4 \
end_type m4 \
end_surround 0.0 \
end_spacing 0.0 \
res_to_endcont 0.2 \
res_spacing $mmetal_spacing \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::res_draw $drawdict]
}
#endif (METALS4 || METALS5 || METALS6)
#ifdef METALS5 || METALS6
proc gf180mcu::rm5_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
set newdict [dict create \
guard 0 \
res_type rm5 \
end_type m5 \
end_surround 0.0 \
end_spacing 0.0 \
res_to_endcont 0.2 \
res_spacing $mmetal_spacing \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::res_draw $drawdict]
}
#endif (METALS5 || METALS6)
#ifdef METALS6
proc gf180mcu::rmtp_draw {parameters} {
# Set a local variable for each rule in ruleset
foreach key [dict keys $gf180mcu::ruleset] {
set $key [dict get $gf180mcu::ruleset $key]
}
set newdict [dict create \
guard 0 \
res_type rmtp \
end_type mtp \
end_surround 0.0 \
end_spacing 0.0 \
res_to_endcont 0.2 \
res_spacing $mmetal_spacing \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::res_draw $drawdict]
}
#endif (METALS6)
#----------------------------------------------------------------
# Resistor total length computation
#----------------------------------------------------------------
proc gf180mcu::compute_ltot {parameters} {
# In case snake not defined
set snake 0
set caplen 0
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
set l [magic::spice2float $l]
set l [magic::3digitpastdecimal $l]
# Compute total length. Use catch to prevent error in batch/scripted mode.
if {$snake == 1} {
catch {set magic::ltot_val [expr ($caplen * ($nx - 1)) + ($l * $nx) + ($nx - 1)]}
} else {
catch {set magic::ltot_val $l}
}
}
#----------------------------------------------------------------
# resistor: Check device parameters for out-of-bounds values
#----------------------------------------------------------------
proc gf180mcu::res_check {device parameters} {
# Set a local variable for each parameter (e.g., $l, $w, etc.)
set snake 0
set sterm 0.0
set caplen 0
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
# Normalize distance units to microns
set w [magic::spice2float $w]
set w [magic::3digitpastdecimal $w]
set l [magic::spice2float $l]
set l [magic::3digitpastdecimal $l]
set val [magic::spice2float $val]
set rho [magic::spice2float $rho]
# nf, m must be integer
if {![string is int $nx]} {
puts stderr "X repeat must be an integer!"
dict set parameters nx 1
}
if {![string is int $m]} {
puts stderr "Y repeat must be an integer!"
dict set parameters m 1
}
# Width always needs to be specified
if {$w < $wmin} {
puts stderr "Resistor width must be >= $wmin um"
dict set parameters w $wmin
}
# Val and W specified - no L
if {$l == 0} {
set l [expr ($w - $dw) * $val / $rho]
set l [magic::3digitpastdecimal $l]
set stringval [magic::float2spice $val]
dict set parameters l [magic::float2spice [expr $l * 1e-6]]
# L and W specified - ignore Val if specified
} else {
if {$snake == 0} {
set val [expr (2 * $term + $l * $rho) / ($w - $dw)]
} else {
set val [expr $rho * ($nx - 1) + ((2 * ($term + $sterm)) \
+ ($rho * $l * $nx) + ($rho * $caplen * ($nx - 1))) \
/ ($w - $dw)]
}
set val [magic::float2spice $val]
dict set parameters val $val
}
if {$l < $lmin} {
puts stderr "Resistor length must be >= $lmin um"
dict set parameters l $lmin
}
if {$nx < 1} {
puts stderr "X repeat must be >= 1"
dict set parameters nx 1
}
if {$m < 1} {
puts stderr "Y repeat must be >= 1"
dict set parameters m 1
}
# Snake resistors cannot have width greater than length
if {$snake == 1} {
if {$w > $l} {
puts stderr "Snake resistor width must be < length"
dict set parameters w $l
}
}
# Diffusion resistors must satisfy diffusion-to-tap spacing of 20um.
# Therefore the maximum of guard ring width or height cannot exceed 40um.
# If in violation, reduce counts first, as these are easiest to recover
# by duplicating the device and overlapping the wells.
if {$device == "rdn" || $device == "rdp"} {
set origm $m
set orignx $nx
while true {
set xext [expr ($w + 0.8) * $nx + 1.0]
set yext [expr ($l + 1.7) * $m + 1.7]
if {[expr min($xext, $yext)] > 40.0} {
if {$yext > 40.0 && $m > 1} {
incr m -1
} elseif {$xext > 40.0 && $nx > 1} {
incr nx -1
} elseif {$yext > 40.0} {
set l 36.6
puts -nonewline stderr "Diffusion resistor length must be < 36.6 um"
puts stderr " to avoid tap spacing violation."
dict set parameters l $l
} elseif {$xext > 40.0} {
set w 38.2
puts -nonewline stderr "Diffusion resistor width must be < 38.2 um"
puts stderr " to avoid tap spacing violation."
dict set parameters w $w
}
} else {
break
}
}
if {$m != $origm} {
puts stderr "Y repeat reduced to prevent tap distance violation"
dict set parameters m $m
}
if {$nx != $orignx} {
puts stderr "X repeat reduced to prevent tap distance violation"
dict set parameters nx $nx
}
}
gf180mcu::compute_ltot $parameters
return $parameters
}
#----------------------------------------------------------------
proc gf180mcu::nwell_check {parameters} {
return [gf180mcu::res_check nwell $parameters]
}
proc gf180mcu::ppolyf_u_check {parameters} {
return [gf180mcu::res_check ppolyf_u $parameters]
}
proc gf180mcu::npolyf_u_check {parameters} {
return [gf180mcu::res_check npolyf_u $parameters]
}
proc gf180mcu::ppolyf_s_check {parameters} {
return [gf180mcu::res_check rpp1s $parameters]
}
proc gf180mcu::npolyf_s_check {parameters} {
return [gf180mcu::res_check rpp1s $parameters]
}
proc gf180mcu::nplus_u_check {parameters} {
return [gf180mcu::res_check nplus_u $parameters]
}
proc gf180mcu::pplus_u_check {parameters} {
return [gf180mcu::res_check pplus_u $parameters]
}
proc gf180mcu::rm1_check {parameters} {
return [gf180mcu::res_check rm1 $parameters]
}
proc gf180mcu::rm2_check {parameters} {
return [gf180mcu::res_check rm2 $parameters]
}
#ifdef METALS3 || METALS4 || METALS5 || METALS6
proc gf180mcu::rm3_check {parameters} {
return [gf180mcu::res_check rm3 $parameters]
}
#endif (METALS3 || METALS4 || METALS5 || METALS6)
#ifdef METALS4 || METALS5 || METALS6
proc gf180mcu::rm4_check {parameters} {
return [gf180mcu::res_check rm4 $parameters]
}
#endif (METALS4 || METALS5 || METALS6)
#ifdef METALS5 || METALS6
proc gf180mcu::rm5_check {parameters} {
return [gf180mcu::res_check rm5 $parameters]
}
#endif (METALS5 || METALS6)
#ifdef METALS6
proc gf180mcu::rmtp_check {parameters} {
return [gf180mcu::res_check rmtp $parameters]
}
#endif (METALS6)
#ifdef HRPOLY1K
proc gf180mcu::ppolyf_u_1k_check {parameters} {
return [gf180mcu::res_check ppolyf_u_1k $parameters]
}
proc gf180mcu::ppolyf_u_1k_6p0_check {parameters} {
return [gf180mcu::res_check ppolyf_u_1k_6p0 $parameters]
}
#endif (HRPOLY1K)
#----------------------------------------------------------------
# MOS defaults:
#----------------------------------------------------------------
# w = Gate width
# l = Gate length
# m = Multiplier
# nf = Number of fingers
# diffcov = Diffusion contact coverage
# polycov = Poly contact coverage
# topc = Top gate contact
# botc = Bottom gate contact
# guard = Guard ring
#
# (not user-editable)
#
# lmin = Gate minimum length
# wmin = Gate minimum width
#----------------------------------------------------------------
#----------------------------------------------------------------
# pmos: Specify all user-editable default values and those
# needed by pmos_check
#----------------------------------------------------------------
proc gf180mcu::pfet_03v3_defaults {} {
return {w 0.220 l 0.280 m 1 nf 1 diffcov 100 polycov 100 \
guard 1 glc 1 grc 1 gtc 0 gbc 0 tbcov 100 rlcov 100 \
topc 1 botc 1 poverlap 0 doverlap 1 lmin 0.28 wmin 0.22 \
full_metal 1 \
compatible {pfet_03v3 pfet_06v0}}
}
proc gf180mcu::pfet_06v0_defaults {} {
return {w 0.3 l 0.5 m 1 nf 1 diffcov 100 polycov 100 \
guard 1 glc 1 grc 1 gtc 0 gbc 0 tbcov 100 rlcov 100 \
topc 1 botc 1 poverlap 0 doverlap 1 lmin 0.5 wmin 0.3 \
full_metal 1 \
compatible {pfet_03v3 pfet_06v0}}
}
#----------------------------------------------------------------
# nmos: Specify all user-editable default values and those
# needed by nmos_check
#----------------------------------------------------------------
proc gf180mcu::nfet_03v3_defaults {} {
return {w 0.220 l 0.280 m 1 nf 1 diffcov 100 polycov 100 \
guard 1 glc 1 grc 1 gtc 0 gbc 0 tbcov 100 rlcov 100 \
topc 1 botc 1 poverlap 0 doverlap 1 lmin 0.28 wmin 0.22 \
full_metal 1 \
compatible {nfet_03v3 nfet_06v0 nfet_06v0_nvt}}
}
proc gf180mcu::nfet_06v0_nvt_defaults {} {
return {w 0.3 l 0.6 m 1 nf 1 diffcov 100 polycov 100 \
guard 1 glc 1 grc 1 gtc 0 gbc 0 tbcov 100 rlcov 100 \
topc 1 botc 1 poverlap 0 doverlap 1 lmin 0.6 wmin 0.3 \
full_metal 1 \
compatible {nfet_03v3 nfet_06v0 nfet_06v0_nvt}}
}
proc gf180mcu::nfet_06v0_nvt_defaults {} {
return {w 0.8 l 1.8 m 1 nf 1 diffcov 100 polycov 100 \
guard 1 glc 1 grc 1 gtc 0 gbc 0 tbcov 100 rlcov 100 \
topc 1 botc 1 poverlap 0 doverlap 1 lmin 1.8 wmin 0.8 \
full_metal 1 \
compatible {nfet_03v3 nfet_06v0 nfet_06v0_nvt}}
}
#----------------------------------------------------------------
# mosvc: Specify all user-editable default values and those
# needed by nmoscap_3p3_check
#----------------------------------------------------------------
proc gf180mcu::nmoscap_3p3_defaults {} {
return {w 1.0 l 1.0 m 1 nf 1 diffcov 100 polycov 100 \
guard 1 glc 1 grc 1 gtc 0 gbc 0 tbcov 100 rlcov 100 \
topc 1 botc 1 poverlap 0 doverlap 1 lmin 0.28 wmin 0.22 \
full_metal 1 compatible {nmoscap_3p3 nmoscap_6p0}}
}
proc gf180mcu::nmoscap_6p0_defaults {} {
return {w 1.0 l 1.0 m 1 nf 1 diffcov 100 polycov 100 \
guard 1 glc 1 grc 1 gtc 0 gbc 0 tbcov 100 rlcov 100 \
topc 1 botc 1 poverlap 0 doverlap 1 lmin 0.28 wmin 0.3 \
full_metal 1 compatible {nmoscap_3p3 nmoscap_6p0}}
}
#----------------------------------------------------------------
# mos: Conversion from SPICE netlist parameters to toolkit
#----------------------------------------------------------------
proc gf180mcu::mos_convert {parameters} {
set pdkparams [dict create]
dict for {key value} $parameters {
switch -nocase $key {
l -
w {
# Length and width are converted to units of microns
set value [magic::spice2float $value]
set value [expr $value * 1e6]
set value [magic::3digitpastdecimal $value]
dict set pdkparams [string tolower $key] $value
}
m {
# M value in an expression like '1*1' convert to
# M and NF
if {[regexp {\'([0-9]+)\*([0-9]+)\'} $value valid m nf]} {
dict set pdkparams [string tolower $key] $m
dict set pdkparams nf $nf
} else {
dict set pdkparams [string tolower $key] $value
}
}
}
}
return $pdkparams
}
#----------------------------------------------------------------
proc gf180mcu::nfet_03v3_convert {parameters} {
return [gf180mcu::mos_convert $parameters]
}
proc gf180mcu::nfet_06v0_nvt_convert {parameters} {
return [gf180mcu::mos_convert $parameters]
}
proc gf180mcu::nfet_06v0_nvt_convert {parameters} {
return [gf180mcu::mos_convert $parameters]
}
proc gf180mcu::pfet_03v3_convert {parameters} {
return [gf180mcu::mos_convert $parameters]
}
proc gf180mcu::pfet_06v0_convert {parameters} {
return [gf180mcu::mos_convert $parameters]
}
proc gf180mcu::nmoscap_3p3_convert {parameters} {
return [gf180mcu::mos_convert $parameters]
}
proc gf180mcu::nmoscap_6p0_convert {parameters} {
return [gf180mcu::mos_convert $parameters]
}
#----------------------------------------------------------------
# mos: Interactively specifies the fixed layout parameters
#----------------------------------------------------------------
proc gf180mcu::mos_dialog {device parameters} {
# Editable fields: w, l, nf, m, diffcov, polycov
# Checked fields: topc, botc
magic::add_entry w "Width (um)" $parameters
magic::add_entry l "Length (um)" $parameters
magic::add_entry nf "Fingers" $parameters
magic::add_entry m "M" $parameters
if {[dict exists $parameters compatible]} {
set sellist [dict get $parameters compatible]
# Reserved word "gencell" has special behavior to change the
# underlying device type
dict set parameters gencell $device
magic::add_selectlist gencell "Device type" $sellist $parameters
}
magic::add_entry diffcov "Diffusion contact coverage (%)" $parameters
magic::add_entry polycov "Poly contact coverage (%)" $parameters
magic::add_entry rlcov "Guard ring contact coverage (%)" $parameters
if {[dict exists $parameters gbc]} {
magic::add_entry tbcov "Guard ring top/bottom contact coverage (%)" $parameters
}
magic::add_checkbox poverlap "Overlap at poly contact" $parameters
magic::add_checkbox doverlap "Overlap at diffusion contact" $parameters
magic::add_checkbox topc "Add top gate contact" $parameters
magic::add_checkbox botc "Add bottom gate contact" $parameters
magic::add_checkbox guard "Add guard ring" $parameters
magic::add_checkbox full_metal "Full metal guard ring" $parameters
magic::add_checkbox glc "Add left guard ring contact" $parameters
magic::add_checkbox grc "Add right guard ring contact" $parameters
if {[dict exists $parameters gbc]} {
magic::add_checkbox gbc "Add bottom guard ring contact" $parameters
}
if {[dict exists $parameters gtc]} {
magic::add_checkbox gtc "Add top guard ring contact" $parameters
}
}
#----------------------------------------------------------------
proc gf180mcu::nfet_03v3_dialog {parameters} {
gf180mcu::mos_dialog nfet_03v3 $parameters
}
proc gf180mcu::nfet_06v0_nvtdialog {parameters} {
gf180mcu::mos_dialog nfet_06v0 $parameters
}
proc gf180mcu::nfet_06v0_nvt_dialog {parameters} {
gf180mcu::mos_dialog nfet_06v0 $parameters
}
proc gf180mcu::pfet_03v3_dialog {parameters} {
gf180mcu::mos_dialog pfet_03v3 $parameters
}
proc gf180mcu::pfet_06v0_dialog {parameters} {
gf180mcu::mos_dialog pfet_06v0 $parameters
}
proc gf180mcu::nmoscap_3p3_dialog {parameters} {
gf180mcu::mos_dialog nmoscap_3p3 $parameters
}
proc gf180mcu::nmoscap_6p0_dialog {parameters} {
gf180mcu::mos_dialog nmoscap_6p0 $parameters
}
#----------------------------------------------------------------
# getbox: Get the current cursor box, in microns
#----------------------------------------------------------------
proc gf180mcu::getbox {} {
set curbox [box values]
set newbox []
set oscale [cif scale out]
for {set i 0} {$i < 4} {incr i} {
set v [* [lindex $curbox $i] $oscale]
lappend newbox $v
}
return $newbox
}
#----------------------------------------------------------------
# unionbox: Get the union bounding box of box1 and box2
#----------------------------------------------------------------
proc gf180mcu::unionbox {box1 box2} {
set newbox []
for {set i 0} {$i < 2} {incr i} {
set v [lindex $box1 $i]
set o [lindex $box2 $i]
if {$v < $o} {
lappend newbox $v
} else {
lappend newbox $o
}
}
for {set i 2} {$i < 4} {incr i} {
set v [lindex $box1 $i]
set o [lindex $box2 $i]
if {$v > $o} {
lappend newbox $v
} else {
lappend newbox $o
}
}
return $newbox
}
#----------------------------------------------------------------
# Draw a contact
#----------------------------------------------------------------
proc gf180mcu::draw_contact {w h s o x atype ctype mtype {orient vert}} {
# Draw a minimum-size diff contact centered at current position
# w is width, h is height. Minimum size ensured.
# x is contact size
# s is contact diffusion (or poly) surround
# o is contact metal surround
# atype is active (e.g., ndiff) or bottom metal if a via
# ctype is contact (e.g., ndc)
# mtype is metal (e.g., m1) or top metal if a via
# cover is percent maximum coverage of contact
pushbox
box size 0 0
if {$w < $x} {set w $x}
if {$h < $x} {set h $x}
set hw [/ $w 2.0]
set hh [/ $h 2.0]
# Bottom layer surrounded on all sides
box grow e ${hw}um
box grow w ${hw}um
box grow n ${hh}um
box grow s ${hh}um
pushbox
paint ${ctype}
popbox
pushbox
box grow c ${s}um
paint ${atype}
set extents [gf180mcu::getbox]
popbox
if {($orient == "vert") || ($orient == "full")} {
box grow n ${o}um
box grow s ${o}um
}
if {($orient == "horz") || ($orient == "full")} {
box grow e ${o}um
box grow w ${o}um
}
paint ${mtype}
popbox
return $extents
}
#----------------------------------------------------------------
# Draw a guard ring
#----------------------------------------------------------------
proc gf180mcu::guard_ring {gw gh parameters} {
# Set local default values if they are not in parameters
set rlcov 100 ;# Right-left contact coverage percentage
set tbcov 100 ;# Top-bottom contact coverage percentage
set grc 1 ;# Draw right side contact
set glc 1 ;# Draw left side contact
set gtc 0 ;# Draw right side contact
set gbc 0 ;# Draw left side contact
set full_metal 0 ;# Draw full (continuous) metal ring
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
set hx [/ $contact_size 2.0]
set hw [/ $gw 2.0]
set hh [/ $gh 2.0]
# Compute diffusion width
set difft [+ $contact_size $diff_surround $diff_surround]
set hdifft [/ $difft 2.0]
# Compute guard ring diffusion width and height
set hdiffw [/ [+ $gw $difft] 2.0]
set hdiffh [/ [+ $gh $difft] 2.0]
pushbox
box size 0 0
pushbox
box move n ${hh}um
box grow n ${hdifft}um
box grow s ${hdifft}um
box grow e ${hdiffw}um
box grow w ${hdiffw}um
paint $plus_diff_type
popbox
pushbox
box move s ${hh}um
box grow n ${hdifft}um
box grow s ${hdifft}um
box grow e ${hdiffw}um
box grow w ${hdiffw}um
paint $plus_diff_type
popbox
pushbox
box move e ${hw}um
box grow e ${hdifft}um
box grow w ${hdifft}um
box grow n ${hdiffh}um
box grow s ${hdiffh}um
paint $plus_diff_type
popbox
pushbox
box move w ${hw}um
box grow e ${hdifft}um
box grow w ${hdifft}um
box grow n ${hdiffh}um
box grow s ${hdiffh}um
paint $plus_diff_type
popbox
if {$full_metal} {
set hmetw [/ [+ $gw $contact_size] 2.0]
set hmeth [/ [+ $gh $contact_size] 2.0]
pushbox
box move n ${hh}um
box grow n ${hx}um
box grow s ${hx}um
box grow e ${hmetw}um
box grow w ${hmetw}um
paint m1
popbox
pushbox
box move s ${hh}um
box grow n ${hx}um
box grow s ${hx}um
box grow e ${hmetw}um
box grow w ${hmetw}um
paint m1
popbox
pushbox
box move e ${hw}um
box grow e ${hx}um
box grow w ${hx}um
box grow n ${hmeth}um
box grow s ${hmeth}um
paint m1
popbox
pushbox
box move w ${hw}um
box grow e ${hx}um
box grow w ${hx}um
box grow n ${hmeth}um
box grow s ${hmeth}um
paint m1
popbox
}
# Set guard ring height so that contact metal reaches to end, scale by $per
# set ch [* [+ $gh $contact_size [* $metal_surround -2.0]] [/ $rlcov 100.0]]
set ch [* [- $gh $contact_size [* [+ $metal_surround $metal_spacing] \
2.0]] [/ $rlcov 100.0]]
if {$ch < $contact_size} {set ch $contact_size}
# Set guard ring width so that contact metal reaches to side contacts
set cw [* [- $gw $contact_size [* [+ $metal_surround $metal_spacing] \
2.0]] [/ $tbcov 100.0]]
if {$cw < $contact_size} {set cw $contact_size}
if {$tbcov > 0.0} {
if {$gtc == 1} {
pushbox
box move n ${hh}um
gf180mcu::draw_contact $cw 0 $diff_surround $metal_surround \
$contact_size $plus_diff_type $plus_contact_type m1 horz
popbox
}
if {$gbc == 1} {
pushbox
box move s ${hh}um
gf180mcu::draw_contact $cw 0 $diff_surround $metal_surround \
$contact_size $plus_diff_type $plus_contact_type m1 horz
popbox
}
}
if {$rlcov > 0.0} {
if {$grc == 1} {
pushbox
box move e ${hw}um
gf180mcu::draw_contact 0 $ch $diff_surround $metal_surround \
$contact_size $plus_diff_type $plus_contact_type m1 vert
popbox
}
if {$glc == 1} {
pushbox
box move w ${hw}um
gf180mcu::draw_contact 0 $ch $diff_surround $metal_surround \
$contact_size $plus_diff_type $plus_contact_type m1 vert
popbox
}
}
pushbox
box grow e ${hw}um
box grow w ${hw}um
box grow n ${hh}um
box grow s ${hh}um
property FIXED_BBOX [box values]
box grow c ${hx}um ;# to edge of contact
box grow c ${diff_surround}um ;# to edge of diffusion
box grow c ${sub_surround}um ;# sub/well overlap of diff
paint $sub_type
set cext [gf180mcu::getbox]
popbox
popbox
return $cext
}
#----------------------------------------------------------------
# MOSFET: Draw a single device
#----------------------------------------------------------------
proc gf180mcu::mos_device {parameters} {
# Epsilon for avoiding round-off errors
set eps 0.0005
# Set local default values if they are not in parameters
set diffcov 100 ;# percent coverage of diffusion contact
set polycov 100 ;# percent coverage of poly contact
set topc 1 ;# draw top poly contact
set botc 1 ;# draw bottom poly contact
set dev_sub_type "" ;# device substrate type (if different from guard ring)
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
# Draw the diffusion and poly
pushbox
box size 0 0
pushbox
set hw [/ $w 2.0]
set hl [/ $l 2.0]
box grow n ${hw}um
box grow s ${hw}um
box grow e ${hl}um
box grow w ${hl}um
pushbox
if {${diff_extension} > ${gate_to_diffcont}} {
box grow e ${diff_extension}um
box grow w ${diff_extension}um
} else {
box grow e ${gate_to_diffcont}um
box grow w ${gate_to_diffcont}um
# Grow to far side of contact; avoids diffusion separation if
# the contact is a dogbone and is moved outward to meet the DRC
# diffusion to gate spacing rule.
set hc [/ ${contact_size} 2.0]
box grow e ${hc}um
box grow w ${hc}um
}
paint ${diff_type}
popbox
pushbox
if {${gate_extension} > ${gate_to_polycont}} {
box grow n ${gate_extension}um
box grow s ${gate_extension}um
} else {
if {$topc} {
box grow n ${gate_to_polycont}um
} else {
box grow n ${gate_extension}um
}
if {$botc} {
box grow s ${gate_to_polycont}um
} else {
box grow s ${gate_extension}um
}
}
paint ${poly_type}
set cext [gf180mcu::getbox]
popbox
# gate_type need not be defined if poly over diff paints the right type.
catch {paint ${gate_type}}
popbox
# Adjust position of contacts for dogbone geometry
# Rule 1: Minimize diffusion length. Contacts only move out
# if width < contact diffusion height. They move out enough
# that the diffusion-to-poly spacing is satisfied. Change the
# orientation of the diffusion contact from vertical to horizontal
set diffcont_orient vert
set ddover 0
set cdwmin [+ ${contact_size} [* ${diff_surround} 2]]
set cstem [- ${gate_to_diffcont} [/ ${cdwmin} 2.0]]
set cgrow [- ${diff_poly_space} ${cstem}]
if {[+ ${w} ${eps}] < ${cdwmin}} {
if {${cgrow} > 0} {
set gate_to_diffcont [+ ${gate_to_diffcont} ${cgrow}]
set diffcont_orient horz
}
set ddover [/ [- ${cdwmin} ${w}] 2.0]
}
# Rule 2: Minimum poly width. Poly contacts only move out
# if length < contact poly width. They move out enough
# that the diffusion-to-poly spacing is satisfied.
set gporig ${gate_to_polycont}
set cplmin [+ ${contact_size} [* ${poly_surround} 2]]
set cstem [- ${gate_to_polycont} [/ ${cplmin} 2.0]]
set cgrow [- ${diff_poly_space} ${cstem}]
if {[+ ${l} ${eps}] < ${cplmin}} {
if {${cgrow} > 0} {
set gate_to_polycont [+ ${gate_to_polycont} ${cgrow}]
}
}
# Rule 3: If both poly and diffusion are dogboned, then move
# poly out further to clear spacing to the diffusion contact.
if {[+ ${w} ${eps}] < ${cdwmin}} {
if {[+ ${l} ${eps}] < ${cplmin}} {
set cgrow [/ [- ${cplmin} ${w}] 2.0]
set gate_to_polycont [+ ${gate_to_polycont} ${cgrow}]
}
}
# Rule 4: If M > 1 and poly contacts overlap, then increase the
# transistor-to-poly-contact distance by the amount of any
# diffusion dogbone overhang.
if {($poverlap == 1) && ($m > 1)} {
if {${gate_to_polycont} - $gporig < $ddover} {
set gate_to_polycont [+ ${gporig} ${ddover}]
}
}
# Reduce contact sizes by poly or diffusion surround so that
# the contact area edges match the device diffusion or poly.
# (Minimum dimensions will be enforced by the contact drawing routine)
set cdw [- ${w} [* ${diff_surround} 2]] ;# diff contact height
set cpl [- ${l} [* ${poly_surround} 2]] ;# poly contact width
# Reduce by coverage percentage. NOTE: If overlapping multiple devices,
# keep maximum poly contact coverage.
set cdw [* ${cdw} [/ ${diffcov} 100.0]]
if {($poverlap == 0) || ($m == 1)} {
set cpl [* ${cpl} [/ ${polycov} 100.0]]
}
# Right diffusion contact
pushbox
box move e ${hl}um
box move e ${gate_to_diffcont}um
set cext [gf180mcu::unionbox $cext [gf180mcu::draw_contact 0 ${cdw} \
${diff_surround} ${metal_surround} ${contact_size}\
${diff_type} ${diff_contact_type} m1 ${diffcont_orient}]]
popbox
# Left diffusion contact
pushbox
box move w ${hl}um
box move w ${gate_to_diffcont}um
set cext [gf180mcu::unionbox $cext [gf180mcu::draw_contact 0 ${cdw} \
${diff_surround} ${metal_surround} ${contact_size} \
${diff_type} ${diff_contact_type} m1 ${diffcont_orient}]]
popbox
# Top poly contact
if {$topc} {
pushbox
box move n ${hw}um
box move n ${gate_to_polycont}um
set cext [gf180mcu::unionbox $cext [gf180mcu::draw_contact ${cpl} 0 \
${poly_surround} ${metal_surround} ${contact_size} \
${poly_type} ${poly_contact_type} m1 horz]]
popbox
}
# Bottom poly contact
if {$botc} {
pushbox
box move s ${hw}um
box move s ${gate_to_polycont}um
set cext [gf180mcu::unionbox $cext [gf180mcu::draw_contact ${cpl} 0 \
${poly_surround} ${metal_surround} ${contact_size} \
${poly_type} ${poly_contact_type} m1 horz]]
popbox
}
if {$dev_sub_type != ""} {
# puts stdout "Diagnostic: bounding box is $cext"
set llx [lindex $cext 0]
set lly [lindex $cext 1]
set urx [lindex $cext 2]
set ury [lindex $cext 3]
box values ${llx}um ${lly}um ${urx}um ${ury}um
box grow n ${sub_surround}um
box grow s ${sub_surround}um
box grow e ${sub_surround}um
box grow w ${sub_surround}um
paint ${dev_sub_type}
set cext [gf180mcu::getbox]
# puts stdout "Diagnostic: bounding box is $cext"
}
popbox
return $cext
}
#----------------------------------------------------------------
# MOSFET: Draw the tiled device
#----------------------------------------------------------------
proc gf180mcu::mos_draw {parameters} {
tech unlock *
# Set defaults if they are not in parameters
set poverlap 0 ;# overlap poly contacts when tiling
set doverlap 1 ;# overlap diffusion contacts when tiling
set dev_sub_dist 0 ;# substrate to guard ring, if dev_sub_type defined
set dev_surround 0 ;# substrate/well surrounds device, if no guard ring
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
# If poverlap is 1 then both poly contacts must be present
if {$poverlap == 1} {
set topc 1
set botc 1
dict set parameters topc 1
dict set parameters botc 1
}
# Normalize distance units to microns
set w [magic::spice2float $w]
set l [magic::spice2float $l]
pushbox
box values 0 0 0 0
# Determine the base device dimensions by drawing one device
# while all layers are locked (nothing drawn). This allows the
# base drawing routine to do complicated geometry without having
# to duplicate it here with calculations.
tech lock *
set bbox [gf180mcu::mos_device $parameters]
# puts stdout "Diagnostic: Device bounding box e $bbox (um)"
tech unlock *
set fw [- [lindex $bbox 2] [lindex $bbox 0]]
set fh [- [lindex $bbox 3] [lindex $bbox 1]]
set lw [+ [lindex $bbox 2] [lindex $bbox 0]]
set lh [+ [lindex $bbox 3] [lindex $bbox 1]]
# Determine tile width and height (depends on overlap)
if {$poverlap == 0} {
set dy [+ $fh $poly_spacing]
} else {
# overlap poly
set dy [- $fh [+ $poly_surround $poly_surround $contact_size]]
}
if {$doverlap == 0} {
set dx [+ $fw $diff_spacing]
} else {
# overlap diffusions
set dx [- $fw [+ $diff_surround $diff_surround $contact_size]]
}
# Determine core width and height
set corex [+ [* [- $nf 1] $dx] $fw]
set corey [+ [* [- $m 1] $dy] $fh]
set corellx [/ [+ [- $corex $fw] $lw] 2.0]
set corelly [/ [+ [- $corey $fh] $lh] 2.0]
# If there is a diffusion dogbone, and no top poly contact, then
# increase the core height by the amount of the dogbone overhang.
if {$topc == 0} {
set cdwmin [+ ${contact_size} [* ${diff_surround} 2]]
if {${w} < ${cdwmin}} {
set corey [+ $corey [/ [- ${cdwmin} ${w}] 2.0]]
}
}
# Calculate guard ring size (measured to contact center)
if {($dev_sub_dist > 0) && ([+ $dev_sub_dist $sub_surround] > $diff_spacing)} {
set gx [+ $corex [* 2.0 [+ $dev_sub_dist $diff_surround]] $contact_size]
} else {
set gx [+ $corex [* 2.0 [+ $diff_spacing $diff_surround]] $contact_size]
}
if {($dev_sub_dist > 0) && ([+ $dev_sub_dist $sub_surround] > $diff_gate_space)} {
set gy [+ $corey [* 2.0 [+ $dev_sub_dist $diff_surround]] $contact_size]
} else {
set gy [+ $corey [* 2.0 [+ $diff_gate_space $diff_surround]] $contact_size]
}
if {($guard != 0)} {
# Somewhat tricky. . . if the width is small and the diffusion is
# a dogbone, and the top or bottom poly contact is missing, then
# the spacing to the guard ring may be limited by diffusion spacing, not
# poly to diffusion.
set inset [/ [+ $contact_size [* 2.0 $diff_surround] -$w] 2.0]
set sdiff [- [+ $inset $diff_spacing] [+ $gate_extension $diff_gate_space]]
if {$sdiff > 0} {
if {$topc == 0} {
set gy [+ $gy $sdiff]
set corelly [+ $corelly [/ $sdiff 2.0]]
}
if {$botc == 0} {
set gy [+ $gy $sdiff]
set corelly [- $corelly [/ $sdiff 2.0]]
}
}
}
if {$guard != 0} {
# Draw the guard ring first, as MOS well may interact with guard ring substrate
gf180mcu::guard_ring $gx $gy $parameters
} else {
pushbox
if {$dev_surround == 0} {set dev_surround $sub_surround}
set hgx [+ $dev_surround [/ $corex 2]]
set hgy [+ $dev_surround [/ $corey 2]]
box grow e ${hgx}um
box grow w ${hgx}um
box grow n ${hgy}um
box grow s ${hgy}um
paint $sub_type
popbox
}
pushbox
box move w ${corellx}um
box move s ${corelly}um
for {set xp 0} {$xp < $nf} {incr xp} {
pushbox
for {set yp 0} {$yp < $m} {incr yp} {
gf180mcu::mos_device $parameters
box move n ${dy}um
}
popbox
box move e ${dx}um
}
popbox
popbox
tech revert
}
#-------------------
# nMOS 3.3V
#-------------------
proc gf180mcu::nfet_03v3_draw {parameters} {
set newdict [dict create \
gate_type nfet \
diff_type ndiff \
diff_contact_type ndc \
plus_diff_type psd \
plus_contact_type psc \
poly_type poly \
poly_contact_type pc \
sub_type pwell \
sub_surround 0.12 \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::mos_draw $drawdict]
}
#-------------------
# pMOS 3.3V
#-------------------
proc gf180mcu::pfet_03v3_draw {parameters} {
set newdict [dict create \
gate_type pfet \
diff_type pdiff \
diff_contact_type pdc \
plus_diff_type nsd \
plus_contact_type nsc \
poly_type poly \
poly_contact_type pc \
dev_surround 0.43 \
sub_type nwell \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::mos_draw $drawdict]
}
#-------------------
# pMOS 6.0V
#-------------------
proc gf180mcu::pfet_06v0_draw {parameters} {
set newdict [dict create \
diff_poly_space 0.30 \
diff_gate_space 0.30 \
diff_spacing 0.36 \
gate_type mvpfet \
diff_type mvpdiff \
diff_contact_type mvpdc \
plus_diff_type mvnsd \
plus_contact_type mvnsc \
poly_type poly \
poly_contact_type pc \
sub_surround 0.16 \
dev_surround 0.43 \
sub_type nwell \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::mos_draw $drawdict]
}
#-------------------
# nMOS 6.0V
#-------------------
proc gf180mcu::nfet_06v0_draw {parameters} {
set newdict [dict create \
diff_poly_space 0.30 \
diff_gate_space 0.30 \
diff_spacing 0.36 \
gate_type mvnfet \
diff_type mvndiff \
diff_contact_type mvndc \
plus_diff_type mvpsd \
plus_contact_type mvpsc \
poly_type poly \
poly_contact_type pc \
sub_type pwell \
sub_surround 0.16 \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::mos_draw $drawdict]
}
proc gf180mcu::nfet_06v0_draw {parameters} {
set newdict [dict create \
gate_type mvnnfet \
diff_type mvndiff \
diff_contact_type mvndc \
plus_diff_type mvpsd \
plus_contact_type mvpsc \
poly_type poly \
poly_contact_type pc \
sub_type pwell \
sub_surround 0.16 \
gate_extension 0.35 \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::mos_draw $drawdict]
}
#------------------------
# MOS varactor (3.3V)
#------------------------
proc gf180mcu::nmoscap_3p3_draw {parameters} {
set newdict [dict create \
gate_type var \
diff_type nsd \
diff_contact_type nsc \
plus_diff_type psd \
plus_contact_type psc \
poly_type poly \
poly_contact_type pc \
sub_type pwell \
dev_sub_type nwell \
dev_sub_dist 0.12 \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::mos_draw $drawdict]
}
#------------------------
# MOS varactor (6.0V)
#------------------------
proc gf180mcu::nmoscap_6p0_draw {parameters} {
set newdict [dict create \
diff_poly_space 0.30 \
diff_gate_space 0.30 \
diff_spacing 0.36 \
gate_type mvvar \
diff_type mvnsd \
diff_contact_type mvnsc \
plus_diff_type mvpsd \
plus_contact_type mvpsc \
poly_type poly \
poly_contact_type pc \
sub_type pwell \
sub_surround 0.16 \
dev_sub_type nwell \
]
set drawdict [dict merge $gf180mcu::ruleset $newdict $parameters]
return [gf180mcu::mos_draw $drawdict]
}
#----------------------------------------------------------------
# nmos: Check device parameters for out-of-bounds values
#----------------------------------------------------------------
proc gf180mcu::mos_check {parameters} {
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
# Normalize distance units to microns
set l [magic::spice2float $l]
set l [magic::3digitpastdecimal $l]
set w [magic::spice2float $w]
set w [magic::3digitpastdecimal $w]
# nf, m must be integer
if {![string is int $nf]} {
puts stderr "NF must be an integer!"
dict set parameters nf 1
}
if {![string is int $m]} {
puts stderr "M must be an integer!"
dict set parameters m 1
}
# diffcov, polycov must be numeric
if {[catch {expr abs($diffcov)}]} {
puts stderr "diffcov must be numeric!"
set diffcov 100
}
if {[catch {expr abs($polycov)}]} {
puts stderr "polycov must be numeric!"
set polycov 100
}
if {$l < $lmin} {
puts stderr "Mos length must be >= $lmin um"
dict set parameters l $lmin
}
if {$w < $wmin} {
puts stderr "Mos width must be >= $wmin um"
dict set parameters w $wmin
}
if {$nf < 1} {
puts stderr "NF must be >= 1"
dict set parameters nf 1
}
if {$m < 1} {
puts stderr "M must be >= 1"
dict set parameters m 1
}
if {$diffcov < 20 } {
puts stderr "Diffusion contact coverage must be at least 20%"
dict set parameters diffcov 20
} elseif {$diffcov > 100 } {
puts stderr "Diffusion contact coverage can't be more than 100%"
dict set parameters diffcov 100
}
if {$polycov < 20 } {
puts stderr "Poly contact coverage must be at least 20%"
dict set parameters polycov 20
} elseif {$polycov > 100 } {
puts stderr "Poly contact coverage can't be more than 100%"
dict set parameters polycov 100
}
# Values must satisfy diffusion-to-tap spacing of 20um.
# Therefore the maximum of guard ring width or height cannot exceed 40um.
# If in violation, reduce counts first, as these are easiest to recover
# by duplicating the device and overlapping the wells.
set origm $m
set orignf $nf
while true {
set yext [expr ($w + 3.0) * $m]
set xext [expr ($l + 1.0) * $nf + 1.1]
if {[expr min($xext, $yext)] > 40.0} {
if {$yext > 40.0 && $m > 1} {
incr m -1
} elseif {$xext > 40.0 && $nf > 1} {
incr nf -1
} elseif {$yext > 40.0} {
set w 37
puts -nonewline stderr "Transistor width must be < 37 um"
puts stderr " to avoid tap spacing violation."
dict set parameters w $w
} elseif {$xext > 40.0} {
set l 37.9
puts -nonewline stderr "Transistor length must be < 37.9 um"
puts stderr " to avoid tap spacing violation."
dict set parameters l $l
}
} else {
break
}
}
if {$m != $origm} {
puts stderr "Y repeat reduced to prevent tap distance violation"
dict set parameters m $m
}
if {$nf != $orignf} {
puts stderr "X repeat reduced to prevent tap distance violation"
dict set parameters nf $nf
}
return $parameters
}
#----------------------------------------------------------------
proc gf180mcu::nfet_03v3_check {parameters} {
return [gf180mcu::mos_check $parameters]
}
proc gf180mcu::nfet_06v0_check {parameters} {
return [gf180mcu::mos_check $parameters]
}
proc gf180mcu::nfet_06v0_nvt_check {parameters} {
return [gf180mcu::mos_check $parameters]
}
proc gf180mcu::pfet_03v3_check {parameters} {
return [gf180mcu::mos_check $parameters]
}
proc gf180mcu::pfet_06v0_check {parameters} {
return [gf180mcu::mos_check $parameters]
}
proc gf180mcu::nmoscap_3p3_check {parameters} {
return [gf180mcu::mos_check $parameters]
}
proc gf180mcu::nmoscap_6p0_check {parameters} {
return [gf180mcu::mos_check $parameters]
}
#----------------------------------------------------------------
# Bipolar: Specify all user-editable default values
#
# deltax --- Additional horizontal space between devices
# deltay --- Additional vertical space between devices
# nx --- Number of arrayed devices in X
# ny --- Number of arrayed devices in Y
#
# Note that these values, specifically nx, ny, deltax,
# and deltay, are properties of the instance, not the cell.
# They translate to the instance array x and y counts; while
# deltax is the x pitch less the cell width, and deltay is the
# y pitch less the cell height.
#
# non-user-editable
#
# nocell --- Indicates that this cell has a predefined layout
# and therefore there is no cell to draw.
# xstep --- Width of the cell (nominal array pitch in X)
# ystep --- Height of the cell (nominal array pitch in Y)
#----------------------------------------------------------------
proc gf180mcu::npn_05p00x05p00_defaults {} {
return {nx 1 ny 1 deltax 0 deltay 0 nocell 1 xstep 13.94 ystep 13.94}
}
proc gf180mcu::npn_00p54x02p00_defaults {} {
return {nx 1 ny 1 deltax 0 deltay 0 nocell 1 xstep 12.36 ystep 16.22}
}
proc gf180mcu::npn_10p00x10p00_defaults {} {
return {nx 1 ny 1 deltax 0 deltay 0 nocell 1 xstep 16.94 ystep 16.94}
}
proc gf180mcu::npn_00p54x04p00_defaults {} {
return {nx 1 ny 1 deltax 0 deltay 0 nocell 1 xstep 12.36 ystep 21.22}
}
proc gf180mcu::pnp_05p00x05p00_defaults {} {
return {nx 1 ny 1 deltax 0 deltay 0 nocell 1 xstep 13.94 ystep 13.94}
}
proc gf180mcu::pnp_05p00x00p42_defaults {} {
return {nx 1 ny 1 deltax 0 deltay 0 nocell 1 xstep 12.36 ystep 16.22}
}
proc gf180mcu::pnp_10p00x10p00_defaults {} {
return {nx 1 ny 1 deltax 0 deltay 0 nocell 1 xstep 16.94 ystep 16.94}
}
proc gf180mcu::pnp_10p00x00p42_defaults {} {
return {nx 1 ny 1 deltax 0 deltay 0 nocell 1 xstep 12.36 ystep 21.22}
}
#----------------------------------------------------------------
# Bipolar: Conversion from SPICE netlist parameters to toolkit
#----------------------------------------------------------------
proc gf180mcu::fixed_convert {parameters} {
set pdkparams [dict create]
dict for {key value} $parameters {
switch -nocase $key {
m {
dict set pdkparams nx $value
}
}
}
return $pdkparams
}
#----------------------------------------------------------------
proc gf180mcu::npn_05p00x05p00_convert {parameters} {
return [gf180mcu::fixed_convert $parameters]
}
proc gf180mcu::npn_00p54x02p00_convert {parameters} {
return [gf180mcu::fixed_convert $parameters]
}
proc gf180mcu::npn_10p00x10p00_convert {parameters} {
return [gf180mcu::fixed_convert $parameters]
}
proc gf180mcu::npn_00p54x04p00_convert {parameters} {
return [gf180mcu::fixed_convert $parameters]
}
proc gf180mcu::pnp_05p00x05p00_convert {parameters} {
return [gf180mcu::fixed_convert $parameters]
}
proc gf180mcu::pnp_05p00x00p42_convert {parameters} {
return [gf180mcu::fixed_convert $parameters]
}
proc gf180mcu::pnp_10p00x10p00_convert {parameters} {
return [gf180mcu::fixed_convert $parameters]
}
proc gf180mcu::pnp_10p00x00p42_convert {parameters} {
return [gf180mcu::fixed_convert $parameters]
}
#----------------------------------------------------------------
# Bipolar: Interactively specifies the fixed layout parameters
#----------------------------------------------------------------
proc gf180mcu::fixed_dialog {parameters} {
# Instance fields: nx, ny, pitchx, pitchy
# Editable fields: nx, ny, deltax, deltay
# Non-editable fields: nocell, xstep, ystep
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
# "nocell" field causes nx and ny to be dropped in from
# "array count". Also "pitchx" and "pitchy" are passed
# in internal units. Convert these to microns and generate
# If there is no pitchx and pitchy, then the device has not
# yet been created, so keep the deltax and deltay defaults.
if [dict exists $parameters pitchx] {
set pitchux [magic::i2u $pitchx]
set stepux [magic::spice2float $xstep]
set deltax [magic::3digitpastdecimal [expr $pitchux - $stepux]]
# An array size 1 should not cause deltax to go negative
if {$deltax < 0.0} {set deltax 0.0}
dict set parameters deltax $deltax
}
if [dict exists $parameters pitchy] {
set pitchuy [magic::i2u $pitchy]
set stepuy [magic::spice2float $ystep]
set deltay [magic::3digitpastdecimal [expr $pitchuy - $stepuy]]
# An array size 1 should not cause deltay to go negative
if {$deltay < 0.0} {set deltay 0.0}
dict set parameters deltay $deltay
}
magic::add_entry nx "NX" $parameters
magic::add_entry ny "NY" $parameters
magic::add_entry deltax "X step (um)" $parameters
magic::add_entry deltay "Y step (um)" $parameters
}
#----------------------------------------------------------------
proc gf180mcu::npn_05p00x05p00_dialog {parameters} {
gf180mcu::fixed_dialog $parameters
}
proc gf180mcu::npn_00p54x02p00_dialog {parameters} {
gf180mcu::fixed_dialog $parameters
}
proc gf180mcu::npn_10p00x10p00_dialog {parameters} {
gf180mcu::fixed_dialog $parameters
}
proc gf180mcu::npn_00p54x04p00_dialog {parameters} {
gf180mcu::fixed_dialog $parameters
}
proc gf180mcu::pnp_05p00x05p00_dialog {parameters} {
gf180mcu::fixed_dialog $parameters
}
proc gf180mcu::pnp_05p00x00p42_dialog {parameters} {
gf180mcu::fixed_dialog $parameters
}
proc gf180mcu::pnp_10p00x10p00_dialog {parameters} {
gf180mcu::fixed_dialog $parameters
}
proc gf180mcu::pnp_10p00x00p42_dialog {parameters} {
gf180mcu::fixed_dialog $parameters
}
#----------------------------------------------------------------
# PNP: Draw the device
#----------------------------------------------------------------
proc gf180mcu::fixed_draw {devname parameters} {
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
# This cell declares "nocell" in parameters, so it needs to
# instance the cell and set properties.
# Instantiate the cell. The name corresponds to the cell in the primdev directory.
set instname [getcell ${devname}]
set deltax [magic::spice2float $deltax]
set deltay [magic::spice2float $deltay]
set xstep [magic::spice2float $xstep]
set ystep [magic::spice2float $ystep]
# Array stepping
if {$nx > 1 || $ny > 1} {
set xstep [expr $xstep + $deltax]
set ystep [expr $ystep + $deltay]
box size ${xstep}um ${ystep}um
array $nx $ny
}
select cell $instname
expand
return $instname
}
#----------------------------------------------------------------
# No additional parameters declared for drawing
#----------------------------------------------------------------
proc gf180mcu::npn_05p00x05p00_draw {parameters} {
return [gf180mcu::fixed_draw npn_05p00x05p00_0 $parameters]
}
proc gf180mcu::npn_00p54x02p00_draw {parameters} {
return [gf180mcu::fixed_draw npn_00p54x02p00_0 $parameters]
}
proc gf180mcu::npn_10p00x10p00_draw {parameters} {
return [gf180mcu::fixed_draw npn_10p00x10p00_0 $parameters]
}
proc gf180mcu::npn_00p54x04p00_draw {parameters} {
return [gf180mcu::fixed_draw npn_00p54x04p00_0 $parameters]
}
proc gf180mcu::pnp_05p00x05p00_draw {parameters} {
return [gf180mcu::fixed_draw pnp_05p00x05p00_0 $parameters]
}
proc gf180mcu::pnp_05p00x00p42_draw {parameters} {
return [gf180mcu::fixed_draw pnp_05p00x00p42_0 $parameters]
}
proc gf180mcu::pnp_10p00x10p00_draw {parameters} {
return [gf180mcu::fixed_draw pnp_10p00x10p00_0 $parameters]
}
proc gf180mcu::pnp_10p00x00p42_draw {parameters} {
return [gf180mcu::fixed_draw pnp_10p00x00p42_0 $parameters]
}
#----------------------------------------------------------------
# Bipolar: Check device parameters for out-of-bounds values
#----------------------------------------------------------------
proc gf180mcu::fixed_check {parameters} {
# Set a local variable for each parameter (e.g., $l, $w, etc.)
foreach key [dict keys $parameters] {
set $key [dict get $parameters $key]
}
# Normalize distance units to microns
set deltax [magic::spice2float $deltax -1]
set deltax [magic::3digitpastdecimal $deltax]
set deltay [magic::spice2float $deltay -1]
set deltay [magic::3digitpastdecimal $deltay]
# nx, ny must be integer
if {![string is int $nx]} {
puts stderr "NX must be an integer!"
dict set parameters nx 1
}
if {![string is int $ny]} {
puts stderr "NY must be an integer!"
dict set parameters nx 1
}
# Number of devices in X and Y must be at least 1
if {$nx < 1} {
puts stderr "NX must be >= 1"
dict set parameters nx 1
}
if {$ny < 1} {
puts stderr "NY must be >= 1"
dict set parameters nx 1
}
# Step less than zero violates DRC
if {$deltax < 0} {
puts stderr "X step must be >= 0"
dict set parameters deltax 0
}
if {$deltay < 0} {
puts stderr "Y step must be >= 0"
dict set parameters deltay 0
}
return $parameters
}
#----------------------------------------------------------------
proc gf180mcu::npn_05p00x05p00_check {parameters} {
return [gf180mcu::fixed_check $parameters]
}
proc gf180mcu::npn_00p54x02p00_check {parameters} {
return [gf180mcu::fixed_check $parameters]
}
proc gf180mcu::npn_10p00x10p00_check {parameters} {
return [gf180mcu::fixed_check $parameters]
}
proc gf180mcu::npn_00p54x04p00_check {parameters} {
return [gf180mcu::fixed_check $parameters]
}
proc gf180mcu::pnp_05p00x05p00_check {parameters} {
return [gf180mcu::fixed_check $parameters]
}
proc gf180mcu::pnp_05p00x00p42_check {parameters} {
return [gf180mcu::fixed_check $parameters]
}
proc gf180mcu::pnp_10p00x10p00_check {parameters} {
return [gf180mcu::fixed_check $parameters]
}
proc gf180mcu::pnp_10p00x00p42_check {parameters} {
return [gf180mcu::fixed_check $parameters]
}