sky130/Makefile - third_party/opencircuitdesign.com/open_pdks - Git at Google

 # Makefile for efabless design kits for SkyWater Sky130:
 #
 #  sky130A      =  5-metal backend stack with dual MiM
 #
 # Written by Tim Edwards March 2019
 # efabless corporation
 # updated October 2019
 # updated December 2019 (divide installation sections for individual tools)
 # updated March 2020 (refactored the install process)
 # updated May 2020 (changed to new process name Sky130)
 #
 # Instructions:
 #
 # Modify values below as needed:
 #
 #	VENDOR_PATH: points to vendor sources
 #	EF_STYLE: 1 for efabless style, 0 otherwise
 #	LINK_TARGETS: link back to source or link to 1st PDK when possible
 #	DIST_PATH: install location for distributed install
 #	LOCAL_PATH: install location for local install or runtime location
 #		    for distributed install
 #
 # Run "make" to stage the PDK for tool setup and vendor libraries

 # If installing into the final destination (local install):
 #
 #   Run "make install-local" to install all staged files
 #   ("make install" is equivalent to "make install-local")
 #
 # If installing into a repository to be distributed to the final destination:
 #
 #   Run "make install-dist" to install all staged files
 #
 # Run "make clean" to remove all staging files.
 #
 # Run "make veryclean" to remove all staging and install log files.
 #
 # For the sake of simplicity, the "standard" local install can be done
 # with the usual
 #
 #   make
 #   make install
 #   make clean
 #
 #--------------------------------------------------------------------
 # This Makefile contains bash-isms
 SHELL = bash

 REVISION    = 20200508
 TECH        = sky130

 # If EF_STYLE is set to 1, then efabless naming conventions are
 # used, otherwise the generic naming conventions are used.
 # Mainly, the hierarchy of library names and file types is reversed
 # (e.g., sky130_fd_sc_hd/lef vs. lef/sky130_fd_sc_hd).

 EF_STYLE = 0
 # EF_STYLE = 1

 # Normally it's fine to keep the staging path in a local directory,
 # although /tmp or a dedicated staging area are also fine, as long
 # as the install process can write to the path.

 STAGING_PATH = `pwd`

 # If LINK_TARGETS is set to "none", then files are copied
 # from the SkyWater sources to the target.  If set to "source",
 # symbolic links are made in the target directories pointing
 # back to the SkyWater sources.  If set to the name of another
 # PDK (e.g, "sky130A"), then symbolic links are made to the
 # same files in that PDK, where they exist, and are copied
 # from source, where they don't.

 # LINK_TARGETS = source
 # LINK_TARGETS = none
 # LINK_TARGETS = sky130A
 LINK_TARGETS = source

 # Paths:

 # Path to skywater_pdk (to be changed to public repo;  work in progress)
 # Version below comes from foss-eda-tools.googlesource.com
 # SKYWATER_PATH = ~/gits/skywater-pdk-scratch/skywater-pdk/libraries
 # Version below is also from foss-eda-tools and is more recent than
 # the scratch repo above.
 SKYWATER_PATH = ~/gits/skywater-pdk/libraries

 # Path to OSU standard cell library sources
 OSU_PATH = ~/gits/osu_130_pdk

 # NOTE:  Install destination is the git repository of the technology platform.
 # Once updated in git, the git project can be distributed to all hosts.
 #
 ifeq (${EF_STYLE}, 1)
     LOCAL_PATH = /ef/tech/SW
     CONFIG_DIR = .ef-config
     REV_DIR = ${REVISION}
 else
     # LOCAL_PATH = /usr/local/share/vlsi/SkyWater
     LOCAL_PATH = ~/projects/efabless/tech/SW
     CONFIG_DIR = .config
     REV_DIR = .
 endif

 DIST_PATH = ~/gits/ef-skywater-${TECH}

 # EF process nodes created from the master sources
 SKY130A = sky130A

 ifeq (${LINK_TARGETS}, ${SKY130A})
     DIST_LINK_TARGETS = ${LOCAL_PATH}/${LINK_TARGETS}
 else
     DIST_LINK_TARGETS = ${LINK_TARGETS}
 endif

 # Basic definitions for each EF process node
 SKY130A_DEFS = -DTECHNAME=sky130A -DREVISION=${REVISION}

 # Module definitions for each process node
 # (Note that MOS is default and therefore not used anywhere)
 # SKY130A_DEFS += -DMETAL5 -DMIM -DREDISTRIBUTION
 SKY130A_DEFS += -DMETAL5 -DMIM

 # Add staging path
 SKY130A_DEFS += -DSTAGING_PATH=${STAGING_PATH}

 ifeq (${EF_STYLE}, 1)
     EF_FORMAT = -ef_format
     SKY130A_DEFS += -DEF_FORMAT
 else
     EF_FORMAT = -std_format
 endif

 MAGICTOP = libs.tech/magic
 NETGENTOP = libs.tech/netgen
 QFLOWTOP = libs.tech/qflow
 KLAYOUTTOP = libs.tech/klayout
 OPENLANETOP = libs.tech/openlane

 ifeq (${EF_STYLE}, 1)
     MAGICPATH = ${MAGICTOP}/${REVISION}
 else
     MAGICPATH = ${MAGICTOP}
 endif

 # Currently, netgen, qflow, and klayout do not use revisioning (needs to change!)
 NETGENPATH = ${NETGENTOP}
 QFLOWPATH = ${QFLOWTOP}
 KLAYOUTPATH = ${KLAYOUTTOP}
 OPENLANEPATH = ${OPENLANETOP}

 MAGICTOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${MAGICTOP}
 NETGENTOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${NETGENTOP}
 QFLOWTOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${QFLOWTOP}
 KLAYOUTTOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${KLAYOUTTOP}
 OPENLANETOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${OPENLANETOP}

 MAGIC_STAGING_A = ${STAGING_PATH}/${SKY130A}/${MAGICPATH}
 NETGEN_STAGING_A = ${STAGING_PATH}/${SKY130A}/${NETGENPATH}
 QFLOW_STAGING_A = ${STAGING_PATH}/${SKY130A}/${QFLOWPATH}
 KLAYOUT_STAGING_A = ${STAGING_PATH}/${SKY130A}/${KLAYOUTPATH}
 OPENLANE_STAGING_A = ${STAGING_PATH}/${SKY130A}/${OPENLANEPATH}

 SKY130A_DEFS += -DMAGIC_CURRENT=${MAGICTOP}/current

 # Where cpp syntax is followed, this is equivalent to cpp, but it does not
 # mangle non-C source files under the belief that they are actually C code.
 CPP   = ../common/preproc.py

 # The following script in the ../common directory does most of the work of
 # copying or linking the foundry vendor files to the target directory.
 STAGE = set -f ; ../common/foundry_install.py ${EF_FORMAT}
 INSTALL = ../common/staging_install.py ${EF_FORMAT}

 # The script(s) below are used for custom changes to the vendor PDK files
 ADDPROP = ../common/insert_property.py ${EF_FORMAT}

 # List the EDA tools to install local setup files for
 TOOLS = magic qflow netgen klayout openlane

 all: all-a

 all-a:
 	echo "Starting sky130A PDK staging on "`date` > ${SKY130A}_install.log
 	${MAKE} tools-a
 	${MAKE} vendor-a
 	echo "Ended sky130A PDK staging on "`date` >> ${SKY130A}_install.log

 tools-a: general-a magic-a qflow-a netgen-a klayout-a openlane-a

 general-a: ${TECH}.json
 	mkdir -p ${STAGING_PATH}/${SKY130A}/${CONFIG_DIR}
 	rm -f ${STAGING_PATH}/${SKY130A}/${CONFIG_DIR}/nodeinfo.json
 	${CPP} ${SKY130A_DEFS} ${TECH}.json > \
 		${STAGING_PATH}/${SKY130A}/${CONFIG_DIR}/nodeinfo.json

 magic-a: magic/${TECH}.tech magic/${TECH}gds.tech magic/${TECH}.magicrc magic/${TECH}.tcl
 	mkdir -p ${MAGICTOP_STAGING_A}
 	mkdir -p ${MAGIC_STAGING_A}
 	rm -f ${MAGICTOP_STAGING_A}/current
 	rm -f ${MAGIC_STAGING_A}/${SKY130A}.tech
 	rm -f ${MAGIC_STAGING_A}/${SKY130A}-GDS.tech
 	rm -f ${MAGIC_STAGING_A}/${SKY130A}.tcl
 	rm -f ${MAGIC_STAGING_A}/${SKY130A}-BindKeys
 	rm -f ${MAGIC_STAGING_A}/magicrc
 	(cd ${MAGICTOP_STAGING_A} ; ln -s ${REV_DIR} current)
 	cp -rp custom/scripts/seal_ring_generator ${MAGIC_STAGING_A}/.
 	${CPP} ${SKY130A_DEFS} magic/${TECH}.tech > ${MAGIC_STAGING_A}/${SKY130A}.tech
 	${CPP} ${SKY130A_DEFS} magic/${TECH}gds.tech > ${MAGIC_STAGING_A}/${SKY130A}-GDS.tech
 	${CPP} ${SKY130A_DEFS} magic/${TECH}.magicrc > ${MAGIC_STAGING_A}/${SKY130A}.magicrc
 	${CPP} ${SKY130A_DEFS} ../common/pdk.bindkeys > ${MAGIC_STAGING_A}/${SKY130A}-BindKeys
 	${CPP} ${SKY130A_DEFS} magic/${TECH}.tcl > ${MAGIC_STAGING_A}/${SKY130A}.tcl
 	${CPP} ${SKY130A_DEFS} ../common/pdk.tcl >> ${MAGIC_STAGING_A}/${SKY130A}.tcl

 qflow-a: qflow/${TECH}.sh qflow/${TECH}.par
 	mkdir -p ${QFLOWTOP_STAGING_A}
 	mkdir -p ${QFLOW_STAGING_A}
 	rm -f ${QFLOW_STAGING_A}/${SKY130A}hd.sh
 	rm -f ${QFLOW_STAGING_A}/${SKY130A}hd.par
 	rm -f ${QFLOW_STAGING_A}/${SKY130A}hdll.sh
 	rm -f ${QFLOW_STAGING_A}/${SKY130A}hdll.par
 	rm -f ${QFLOW_STAGING_A}/${SKY130A}hs.sh
 	rm -f ${QFLOW_STAGING_A}/${SKY130A}hs.par
 	rm -f ${QFLOW_STAGING_A}/${SKY130A}hvl.sh
 	rm -f ${QFLOW_STAGING_A}/${SKY130A}hvl.par
 	rm -f ${QFLOW_STAGING_A}/${SKY130A}ls.sh
 	rm -f ${QFLOW_STAGING_A}/${SKY130A}ls.par
 	rm -f ${QFLOW_STAGING_A}/${SKY130A}lp.sh
 	rm -f ${QFLOW_STAGING_A}/${SKY130A}lp.par
 	rm -f ${QFLOW_STAGING_A}/${SKY130A}ms.sh
 	rm -f ${QFLOW_STAGING_A}/${SKY130A}ms.par
 	rm -f ${QFLOW_STAGING_A}/${SKY130A}osu.sh
 	rm -f ${QFLOW_STAGING_A}/${SKY130A}osu.par
 	${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_hd qflow/${TECH}.sh > \
 		${QFLOW_STAGING_A}/${SKY130A}hd.sh
 	${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_hdll qflow/${TECH}.sh > \
 		${QFLOW_STAGING_A}/${SKY130A}hdll.sh
 	${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_hvl qflow/${TECH}.sh > \
 		${QFLOW_STAGING_A}/${SKY130A}hvl.sh
 	${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_hs qflow/${TECH}.sh > \
 		${QFLOW_STAGING_A}/${SKY130A}hs.sh
 	${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_lp qflow/${TECH}.sh > \
 		${QFLOW_STAGING_A}/${SKY130A}lp.sh
 	${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_ls qflow/${TECH}.sh > \
 		${QFLOW_STAGING_A}/${SKY130A}ls.sh
 	${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_ms qflow/${TECH}.sh > \
 		${QFLOW_STAGING_A}/${SKY130A}ms.sh
 	${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_osu_sc qflow/sky130osu.sh > \
 		${QFLOW_STAGING_A}/${SKY130A}osu.sh
 	${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}hd.par
 	${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}hdll.par
 	${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}hvl.par
 	${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}hs.par
 	${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}ms.par
 	${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}lp.par
 	${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}ls.par
 	${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}osu.par

 netgen-a: netgen/${TECH}_setup.tcl
 	mkdir -p ${NETGENTOP_STAGING_A}
 	mkdir -p ${NETGEN_STAGING_A}
 	rm -f ${NETGEN_STAGING_A}/${SKY130A}_setup.tcl
 	rm -f ${NETGEN_STAGING_A}/setup.tcl
 	${CPP} ${SKY130A_DEFS} netgen/${TECH}_setup.tcl > ${NETGEN_STAGING_A}/${SKY130A}_setup.tcl
 	(cd ${NETGEN_STAGING_A} ; ln -s ${SKY130A}_setup.tcl setup.tcl)

 klayout-a: klayout/${TECH}.lyp klayout/${TECH}.lyt
 	mkdir -p ${KLAYOUTTOP_STAGING_A}
 	mkdir -p ${KLAYOUT_STAGING_A}
 	rm -f ${KLAYOUT_STAGING_A}/${SKY130A}.lyp
 	rm -f ${KLAYOUT_STAGING_A}/${SKY130A}.lyt
 	${CPP} ${SKY130A_DEFS} klayout/${TECH}.lyp > ${KLAYOUT_STAGING_A}/${SKY130A}.lyp
 	${CPP} ${SKY130A_DEFS} klayout/${TECH}.lyt > ${KLAYOUT_STAGING_A}/${SKY130A}.lyt

 openlane-a: openlane/common_pdn.tcl openlane/config.tcl openlane/sky130_fd_sc_hd/config.tcl  openlane/sky130_fd_sc_hs/config.tcl
 	mkdir -p ${OPENLANETOP_STAGING_A}
 	mkdir -p ${OPENLANE_STAGING_A}
 	mkdir -p ${OPENLANE_STAGING_A}/sky130_fd_sc_hd
 	mkdir -p ${OPENLANE_STAGING_A}/sky130_fd_sc_hs
 	rm -f ${OPENLANE_STAGING_A}/common_pdn.info
 	rm -f ${OPENLANE_STAGING_A}/config.tcl
 	rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/config.tcl
 	rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/tracks.info
 	rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/no_synth.cells
 	rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/sky130_fd_sc_hd__fakediode_2.gds
 	rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/config.tcl
 	rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/tracks.info
 	rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/no_synth.cells
 	${CPP} ${SKY130A_DEFS} openlane/common_pdn.tcl > ${OPENLANE_STAGING_A}/common_pdn.tcl
 	${CPP} ${SKY130A_DEFS} openlane/config.tcl > ${OPENLANE_STAGING_A}/config.tcl
 	${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hd/config.tcl > ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/config.tcl
 	${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hd/tracks.info > ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/tracks.info
 	${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hd/no_synth.cells > ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/no_synth.cells
 	cp openlane/sky130_fd_sc_hd/sky130_fd_sc_hd__fakediode_2.gds ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/sky130_fd_sc_hd__fakediode_2.gds
 	${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hs/config.tcl > ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/config.tcl
 	${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hs/tracks.info > ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/tracks.info
 	${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hs/no_synth.cells > ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/no_synth.cells

 vendor-a:
 	# Install base device models from vendor files
 	# (NOTE: .mod and .pm3 files should not be in /cells/?)
 	${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
 		-ngspice sky130_fd_pr_base/v%v/models/* filter=custom/scripts/fixspice.py \
 		-ngspice sky130_fd_pr_base/v%v/cells/*.mod filter=custom/scripts/fixspice.py \
 		-ngspice sky130_fd_pr_base/v%v/cells/*.pm3 filter=custom/scripts/fixspice.py \
 		|& tee -a ${SKY130A}_install.log
 	# Install RF device models from vendor files
 	${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
 		-ngspice sky130_fd_pr_rf/v%v/models/* filter=custom/scripts/fixspice.py \
 		|& tee -a ${SKY130A}_install.log
 	# Install additional RF device models from vendor files
 	${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
 		-ngspice sky130_fd_pr_rf2/v%v/models/* filter=custom/scripts/fixspice.py \
 		|& tee -a ${SKY130A}_install.log
 	# Install base device library from vendor files
 	${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
 		-gds %l/v%v/cells/*/*.gds \
 		-spice %l/v%v/cells/*/*.spice ignore=topography \
 		-spice %l/v%v/cells/*/*.sp \
 		-library primitive sky130_fd_pr_base \
 		-library primitive sky130_fd_pr_rf \
 		-library primitive sky130_fd_pr_rf2 |& tee -a ${SKY130A}_install.log
 	# Install SkyWater I/O pad library
 	# Purposely ignoring "-lef sky130_fd_io/v%v/lef/*.lef" and making our own LEF views
 	${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
 		-gds %l/v%v/cells/*/*.gds \
 		-verilog %l/v%v/cells/*/*.v \
 		-lib %l/v%v/cells/*/*.lib \
 		-doc %l/v%v/cells/*/*.doc \
 		-cdl %l/v%v/cells/*/*.cdl ignore=topography \
 		-spice %l/v%v/cells/*/*.spice  \
 		-library general sky130_fd_io |& tee -a ${SKY130A}_install.log
         # Install all SkyWater digital standard cells.
 	${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
 		-spice %l/v%v/cells/*/*.spice compile-only \
 		-cdl %l/v%v/cells/*/*.cdl ignore=topography compile-only \
 		-lef %l/v%v/cells/*/*.lef compile-only \
 		-doc %l/v%v/cells/*/*.pdf \
 		-lib %l/v%v/timing/*.lib \
 		-gds %l/v%v/cells/*/*.gds compile-only \
 		-verilog %l/v%v/cells/*/*.v exclude=*.*.v compile-only \
 		-library digital sky130_fd_sc_hd \
 		-library digital sky130_fd_sc_hdll \
 		-library digital sky130_fd_sc_hvl \
 		-library digital sky130_fd_sc_hs \
 		-library digital sky130_fd_sc_ls \
 		-library digital sky130_fd_sc_ms \
 		-library digital sky130_fd_sc_lp |& tee -a ${SKY130A}_install.log
         # Install OSU digital standard cells.
 	${STAGE} -source ${OSU_PATH} -target ${STAGING_PATH}/${SKY130A} \
 		-techlef char/techfiles/scs8.lef rename sky130_osu_sc.tlef \
 		-spice lib/spice/*.spice compile-only \
 		-lef outputs/s8_osu130.lef rename sky130_osu_sc.lef \
 		-lib outputs/*.lib \
 		-gds lib/gds/*.gds compile-only \
 		-verilog outputs/VERILOG/*.v \
 		-library digital sky130_osu_sc
 	# Install additional model file (efabless)
 	${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \
 		-ngspice models/*.lib rename ${SKY130A}.lib \
 		|& tee -a ${SKY130A}_install.log
 	# Install custom additions to digital libraries
 	${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \
 		-techlef techLEF/sky130_fd_sc_hd_tech.lef \
 		-library digital sky130_fd_sc_hd |& tee -a ${SKY130A}_install.log
 	${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \
 		-techlef techLEF/sky130_fd_sc_hd_tech.lef \
 			rename sky130_fd_sc_hdll_tech.lef \
 		-library digital sky130_fd_sc_hdll |& tee -a ${SKY130A}_install.log
 	${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \
 		-techlef techLEF/sky130_fd_sc_hs_tech.lef \
 		-library digital sky130_fd_sc_hs |& tee -a ${SKY130A}_install.log
 	${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \
 		-techlef techLEF/sky130_fd_sc_hs_tech.lef \
 			rename sky130_fd_sc_ms_tech.lef \
 		-library digital sky130_fd_sc_ms |& tee -a ${SKY130A}_install.log
 	${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \
 		-techlef techLEF/sky130_fd_sc_hs_tech.lef \
 			rename sky130_fd_sc_ls_tech.lef \
 		-library digital sky130_fd_sc_ls |& tee -a ${SKY130A}_install.log
 	# Install custom additions to I/O pad library
 	${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \
 		-gds %l/gds/*.gds \
 		-verilog %l/verilog/*.v \
 		-lef %l/lef/*.lef \
 		-spice %l/spice/*.spice \
 		-library general sky130_fd_io |& tee -a ${SKY130A}_install.log
 	# Add correct bounding boxes on Magic layouts
 	${ADDPROP} ${STAGING_PATH}/${SKY130A} sky130_fd_io sky130_fd_io_top_gpio_ovtv2 \
 		"FIXED_BBOX 0 407 28000 40000"
 	${ADDPROP} ${STAGING_PATH}/${SKY130A} sky130_fd_io sky130_fd_io_top_xres4v2 \
 		"FIXED_BBOX 0 407 15000 40000"

 install: install-local

 install-local: install-local-a

 install-local-a:
 	echo "Starting SKY130 PDK migration on "`date` > ${SKY130A}_migrate.log
 	${INSTALL} -source ${STAGING_PATH}/${SKY130A} \
 		-target ${LOCAL_PATH}/${SKY130A} \
 		-link_from ${LINK_TARGETS} |& tee -a ${SKY130A}_migrate.log
 	echo "Ended SKY130 PDK migration on "`date` >> ${SKY130A}_migrate.log

 install-dist: install-dist-a

 install-dist-a:
 	echo "Starting SKY130 PDK migration on "`date` > ${SKY130A}_migrate.log
 	${INSTALL} -source ${STAGING_PATH}/${SKY130A} \
 		-target ${DIST_PATH}/${SKY130A} \
 		-local ${LOCAL_PATH}/${SKY130A} \
 		-link_from ${DIST_LINK_TARGETS} |& tee -a ${SKY130A}_migrate.log
 	echo "Ended SKY130 PDK migration on "`date` >> ${SKY130A}_migrate.log

 clean: clean-a

 clean-a:
 	${STAGE} -target ${STAGING_PATH}/${SKY130A} -clean

 veryclean: veryclean-a

 veryclean-a: clean-a
 	${RM} ${SKY130A}_install.log
 	${RM} ${SKY130A}_migrate.log
	# Makefile for efabless design kits for SkyWater Sky130:
	#
	# sky130A = 5-metal backend stack with dual MiM
	#
	# Written by Tim Edwards March 2019
	# efabless corporation
	# updated October 2019
	# updated December 2019 (divide installation sections for individual tools)
	# updated March 2020 (refactored the install process)
	# updated May 2020 (changed to new process name Sky130)
	#
	# Instructions:
	#
	# Modify values below as needed:
	#
	# VENDOR_PATH: points to vendor sources
	# EF_STYLE: 1 for efabless style, 0 otherwise
	# LINK_TARGETS: link back to source or link to 1st PDK when possible
	# DIST_PATH: install location for distributed install
	# LOCAL_PATH: install location for local install or runtime location
	# for distributed install
	#
	# Run "make" to stage the PDK for tool setup and vendor libraries

	# If installing into the final destination (local install):
	#
	# Run "make install-local" to install all staged files
	# ("make install" is equivalent to "make install-local")
	#
	# If installing into a repository to be distributed to the final destination:
	#
	# Run "make install-dist" to install all staged files
	#
	# Run "make clean" to remove all staging files.
	#
	# Run "make veryclean" to remove all staging and install log files.
	#
	# For the sake of simplicity, the "standard" local install can be done
	# with the usual
	#
	# make
	# make install
	# make clean
	#
	#--------------------------------------------------------------------
	# This Makefile contains bash-isms
	SHELL = bash

	REVISION = 20200508
	TECH = sky130

	# If EF_STYLE is set to 1, then efabless naming conventions are
	# used, otherwise the generic naming conventions are used.
	# Mainly, the hierarchy of library names and file types is reversed
	# (e.g., sky130_fd_sc_hd/lef vs. lef/sky130_fd_sc_hd).

	EF_STYLE = 0
	# EF_STYLE = 1

	# Normally it's fine to keep the staging path in a local directory,
	# although /tmp or a dedicated staging area are also fine, as long
	# as the install process can write to the path.

	STAGING_PATH = `pwd`

	# If LINK_TARGETS is set to "none", then files are copied
	# from the SkyWater sources to the target. If set to "source",
	# symbolic links are made in the target directories pointing
	# back to the SkyWater sources. If set to the name of another
	# PDK (e.g, "sky130A"), then symbolic links are made to the
	# same files in that PDK, where they exist, and are copied
	# from source, where they don't.

	# LINK_TARGETS = source
	# LINK_TARGETS = none
	# LINK_TARGETS = sky130A
	LINK_TARGETS = source

	# Paths:

	# Path to skywater_pdk (to be changed to public repo; work in progress)
	# Version below comes from foss-eda-tools.googlesource.com
	# SKYWATER_PATH = ~/gits/skywater-pdk-scratch/skywater-pdk/libraries
	# Version below is also from foss-eda-tools and is more recent than
	# the scratch repo above.
	SKYWATER_PATH = ~/gits/skywater-pdk/libraries

	# Path to OSU standard cell library sources
	OSU_PATH = ~/gits/osu_130_pdk

	# NOTE: Install destination is the git repository of the technology platform.
	# Once updated in git, the git project can be distributed to all hosts.
	#
	ifeq (${EF_STYLE}, 1)
	LOCAL_PATH = /ef/tech/SW
	CONFIG_DIR = .ef-config
	REV_DIR = ${REVISION}
	else
	# LOCAL_PATH = /usr/local/share/vlsi/SkyWater
	LOCAL_PATH = ~/projects/efabless/tech/SW
	CONFIG_DIR = .config
	REV_DIR = .
	endif

	DIST_PATH = ~/gits/ef-skywater-${TECH}

	# EF process nodes created from the master sources
	SKY130A = sky130A

	ifeq (${LINK_TARGETS}, ${SKY130A})
	DIST_LINK_TARGETS = ${LOCAL_PATH}/${LINK_TARGETS}
	else
	DIST_LINK_TARGETS = ${LINK_TARGETS}
	endif

	# Basic definitions for each EF process node
	SKY130A_DEFS = -DTECHNAME=sky130A -DREVISION=${REVISION}

	# Module definitions for each process node
	# (Note that MOS is default and therefore not used anywhere)
	# SKY130A_DEFS += -DMETAL5 -DMIM -DREDISTRIBUTION
	SKY130A_DEFS += -DMETAL5 -DMIM

	# Add staging path
	SKY130A_DEFS += -DSTAGING_PATH=${STAGING_PATH}

	ifeq (${EF_STYLE}, 1)
	EF_FORMAT = -ef_format
	SKY130A_DEFS += -DEF_FORMAT
	else
	EF_FORMAT = -std_format
	endif

	MAGICTOP = libs.tech/magic
	NETGENTOP = libs.tech/netgen
	QFLOWTOP = libs.tech/qflow
	KLAYOUTTOP = libs.tech/klayout
	OPENLANETOP = libs.tech/openlane

	ifeq (${EF_STYLE}, 1)
	MAGICPATH = ${MAGICTOP}/${REVISION}
	else
	MAGICPATH = ${MAGICTOP}
	endif

	# Currently, netgen, qflow, and klayout do not use revisioning (needs to change!)
	NETGENPATH = ${NETGENTOP}
	QFLOWPATH = ${QFLOWTOP}
	KLAYOUTPATH = ${KLAYOUTTOP}
	OPENLANEPATH = ${OPENLANETOP}

	MAGICTOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${MAGICTOP}
	NETGENTOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${NETGENTOP}
	QFLOWTOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${QFLOWTOP}
	KLAYOUTTOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${KLAYOUTTOP}
	OPENLANETOP_STAGING_A = ${STAGING_PATH}/${SKY130A}/${OPENLANETOP}

	MAGIC_STAGING_A = ${STAGING_PATH}/${SKY130A}/${MAGICPATH}
	NETGEN_STAGING_A = ${STAGING_PATH}/${SKY130A}/${NETGENPATH}
	QFLOW_STAGING_A = ${STAGING_PATH}/${SKY130A}/${QFLOWPATH}
	KLAYOUT_STAGING_A = ${STAGING_PATH}/${SKY130A}/${KLAYOUTPATH}
	OPENLANE_STAGING_A = ${STAGING_PATH}/${SKY130A}/${OPENLANEPATH}

	SKY130A_DEFS += -DMAGIC_CURRENT=${MAGICTOP}/current

	# Where cpp syntax is followed, this is equivalent to cpp, but it does not
	# mangle non-C source files under the belief that they are actually C code.
	CPP = ../common/preproc.py

	# The following script in the ../common directory does most of the work of
	# copying or linking the foundry vendor files to the target directory.
	STAGE = set -f ; ../common/foundry_install.py ${EF_FORMAT}
	INSTALL = ../common/staging_install.py ${EF_FORMAT}

	# The script(s) below are used for custom changes to the vendor PDK files
	ADDPROP = ../common/insert_property.py ${EF_FORMAT}

	# List the EDA tools to install local setup files for
	TOOLS = magic qflow netgen klayout openlane

	all: all-a

	all-a:
	echo "Starting sky130A PDK staging on "`date` > ${SKY130A}_install.log
	${MAKE} tools-a
	${MAKE} vendor-a
	echo "Ended sky130A PDK staging on "`date` >> ${SKY130A}_install.log

	tools-a: general-a magic-a qflow-a netgen-a klayout-a openlane-a

	general-a: ${TECH}.json
	mkdir -p ${STAGING_PATH}/${SKY130A}/${CONFIG_DIR}
	rm -f ${STAGING_PATH}/${SKY130A}/${CONFIG_DIR}/nodeinfo.json
	${CPP} ${SKY130A_DEFS} ${TECH}.json > \
	${STAGING_PATH}/${SKY130A}/${CONFIG_DIR}/nodeinfo.json

	magic-a: magic/${TECH}.tech magic/${TECH}gds.tech magic/${TECH}.magicrc magic/${TECH}.tcl
	mkdir -p ${MAGICTOP_STAGING_A}
	mkdir -p ${MAGIC_STAGING_A}
	rm -f ${MAGICTOP_STAGING_A}/current
	rm -f ${MAGIC_STAGING_A}/${SKY130A}.tech
	rm -f ${MAGIC_STAGING_A}/${SKY130A}-GDS.tech
	rm -f ${MAGIC_STAGING_A}/${SKY130A}.tcl
	rm -f ${MAGIC_STAGING_A}/${SKY130A}-BindKeys
	rm -f ${MAGIC_STAGING_A}/magicrc
	(cd ${MAGICTOP_STAGING_A} ; ln -s ${REV_DIR} current)
	cp -rp custom/scripts/seal_ring_generator ${MAGIC_STAGING_A}/.
	${CPP} ${SKY130A_DEFS} magic/${TECH}.tech > ${MAGIC_STAGING_A}/${SKY130A}.tech
	${CPP} ${SKY130A_DEFS} magic/${TECH}gds.tech > ${MAGIC_STAGING_A}/${SKY130A}-GDS.tech
	${CPP} ${SKY130A_DEFS} magic/${TECH}.magicrc > ${MAGIC_STAGING_A}/${SKY130A}.magicrc
	${CPP} ${SKY130A_DEFS} ../common/pdk.bindkeys > ${MAGIC_STAGING_A}/${SKY130A}-BindKeys
	${CPP} ${SKY130A_DEFS} magic/${TECH}.tcl > ${MAGIC_STAGING_A}/${SKY130A}.tcl
	${CPP} ${SKY130A_DEFS} ../common/pdk.tcl >> ${MAGIC_STAGING_A}/${SKY130A}.tcl

	qflow-a: qflow/${TECH}.sh qflow/${TECH}.par
	mkdir -p ${QFLOWTOP_STAGING_A}
	mkdir -p ${QFLOW_STAGING_A}
	rm -f ${QFLOW_STAGING_A}/${SKY130A}hd.sh
	rm -f ${QFLOW_STAGING_A}/${SKY130A}hd.par
	rm -f ${QFLOW_STAGING_A}/${SKY130A}hdll.sh
	rm -f ${QFLOW_STAGING_A}/${SKY130A}hdll.par
	rm -f ${QFLOW_STAGING_A}/${SKY130A}hs.sh
	rm -f ${QFLOW_STAGING_A}/${SKY130A}hs.par
	rm -f ${QFLOW_STAGING_A}/${SKY130A}hvl.sh
	rm -f ${QFLOW_STAGING_A}/${SKY130A}hvl.par
	rm -f ${QFLOW_STAGING_A}/${SKY130A}ls.sh
	rm -f ${QFLOW_STAGING_A}/${SKY130A}ls.par
	rm -f ${QFLOW_STAGING_A}/${SKY130A}lp.sh
	rm -f ${QFLOW_STAGING_A}/${SKY130A}lp.par
	rm -f ${QFLOW_STAGING_A}/${SKY130A}ms.sh
	rm -f ${QFLOW_STAGING_A}/${SKY130A}ms.par
	rm -f ${QFLOW_STAGING_A}/${SKY130A}osu.sh
	rm -f ${QFLOW_STAGING_A}/${SKY130A}osu.par
	${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_hd qflow/${TECH}.sh > \
	${QFLOW_STAGING_A}/${SKY130A}hd.sh
	${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_hdll qflow/${TECH}.sh > \
	${QFLOW_STAGING_A}/${SKY130A}hdll.sh
	${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_hvl qflow/${TECH}.sh > \
	${QFLOW_STAGING_A}/${SKY130A}hvl.sh
	${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_hs qflow/${TECH}.sh > \
	${QFLOW_STAGING_A}/${SKY130A}hs.sh
	${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_lp qflow/${TECH}.sh > \
	${QFLOW_STAGING_A}/${SKY130A}lp.sh
	${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_ls qflow/${TECH}.sh > \
	${QFLOW_STAGING_A}/${SKY130A}ls.sh
	${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_fd_sc_ms qflow/${TECH}.sh > \
	${QFLOW_STAGING_A}/${SKY130A}ms.sh
	${CPP} ${SKY130A_DEFS} -DLIBRARY=sky130_osu_sc qflow/sky130osu.sh > \
	${QFLOW_STAGING_A}/${SKY130A}osu.sh
	${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}hd.par
	${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}hdll.par
	${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}hvl.par
	${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}hs.par
	${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}ms.par
	${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}lp.par
	${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}ls.par
	${CPP} ${SKY130A_DEFS} qflow/${TECH}.par > ${QFLOW_STAGING_A}/${SKY130A}osu.par

	netgen-a: netgen/${TECH}_setup.tcl
	mkdir -p ${NETGENTOP_STAGING_A}
	mkdir -p ${NETGEN_STAGING_A}
	rm -f ${NETGEN_STAGING_A}/${SKY130A}_setup.tcl
	rm -f ${NETGEN_STAGING_A}/setup.tcl
	${CPP} ${SKY130A_DEFS} netgen/${TECH}_setup.tcl > ${NETGEN_STAGING_A}/${SKY130A}_setup.tcl
	(cd ${NETGEN_STAGING_A} ; ln -s ${SKY130A}_setup.tcl setup.tcl)

	klayout-a: klayout/${TECH}.lyp klayout/${TECH}.lyt
	mkdir -p ${KLAYOUTTOP_STAGING_A}
	mkdir -p ${KLAYOUT_STAGING_A}
	rm -f ${KLAYOUT_STAGING_A}/${SKY130A}.lyp
	rm -f ${KLAYOUT_STAGING_A}/${SKY130A}.lyt
	${CPP} ${SKY130A_DEFS} klayout/${TECH}.lyp > ${KLAYOUT_STAGING_A}/${SKY130A}.lyp
	${CPP} ${SKY130A_DEFS} klayout/${TECH}.lyt > ${KLAYOUT_STAGING_A}/${SKY130A}.lyt

	openlane-a: openlane/common_pdn.tcl openlane/config.tcl openlane/sky130_fd_sc_hd/config.tcl openlane/sky130_fd_sc_hs/config.tcl
	mkdir -p ${OPENLANETOP_STAGING_A}
	mkdir -p ${OPENLANE_STAGING_A}
	mkdir -p ${OPENLANE_STAGING_A}/sky130_fd_sc_hd
	mkdir -p ${OPENLANE_STAGING_A}/sky130_fd_sc_hs
	rm -f ${OPENLANE_STAGING_A}/common_pdn.info
	rm -f ${OPENLANE_STAGING_A}/config.tcl
	rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/config.tcl
	rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/tracks.info
	rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/no_synth.cells
	rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/sky130_fd_sc_hd__fakediode_2.gds
	rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/config.tcl
	rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/tracks.info
	rm -f ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/no_synth.cells
	${CPP} ${SKY130A_DEFS} openlane/common_pdn.tcl > ${OPENLANE_STAGING_A}/common_pdn.tcl
	${CPP} ${SKY130A_DEFS} openlane/config.tcl > ${OPENLANE_STAGING_A}/config.tcl
	${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hd/config.tcl > ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/config.tcl
	${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hd/tracks.info > ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/tracks.info
	${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hd/no_synth.cells > ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/no_synth.cells
	cp openlane/sky130_fd_sc_hd/sky130_fd_sc_hd__fakediode_2.gds ${OPENLANE_STAGING_A}/sky130_fd_sc_hd/sky130_fd_sc_hd__fakediode_2.gds
	${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hs/config.tcl > ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/config.tcl
	${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hs/tracks.info > ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/tracks.info
	${CPP} ${SKY130A_DEFS} openlane/sky130_fd_sc_hs/no_synth.cells > ${OPENLANE_STAGING_A}/sky130_fd_sc_hs/no_synth.cells

	vendor-a:
	# Install base device models from vendor files
	# (NOTE: .mod and .pm3 files should not be in /cells/?)
	${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
	-ngspice sky130_fd_pr_base/v%v/models/* filter=custom/scripts/fixspice.py \
	-ngspice sky130_fd_pr_base/v%v/cells/*.mod filter=custom/scripts/fixspice.py \
	-ngspice sky130_fd_pr_base/v%v/cells/*.pm3 filter=custom/scripts/fixspice.py \
	\|& tee -a ${SKY130A}_install.log
	# Install RF device models from vendor files
	${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
	-ngspice sky130_fd_pr_rf/v%v/models/* filter=custom/scripts/fixspice.py \
	\|& tee -a ${SKY130A}_install.log
	# Install additional RF device models from vendor files
	${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
	-ngspice sky130_fd_pr_rf2/v%v/models/* filter=custom/scripts/fixspice.py \
	\|& tee -a ${SKY130A}_install.log
	# Install base device library from vendor files
	${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
	-gds %l/v%v/cells//.gds \
	-spice %l/v%v/cells//.spice ignore=topography \
	-spice %l/v%v/cells//.sp \
	-library primitive sky130_fd_pr_base \
	-library primitive sky130_fd_pr_rf \
	-library primitive sky130_fd_pr_rf2 \|& tee -a ${SKY130A}_install.log
	# Install SkyWater I/O pad library
	# Purposely ignoring "-lef sky130_fd_io/v%v/lef/*.lef" and making our own LEF views
	${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
	-gds %l/v%v/cells//.gds \
	-verilog %l/v%v/cells//.v \
	-lib %l/v%v/cells//.lib \
	-doc %l/v%v/cells//.doc \
	-cdl %l/v%v/cells//.cdl ignore=topography \
	-spice %l/v%v/cells//.spice \
	-library general sky130_fd_io \|& tee -a ${SKY130A}_install.log
	# Install all SkyWater digital standard cells.
	${STAGE} -source ${SKYWATER_PATH} -target ${STAGING_PATH}/${SKY130A} \
	-spice %l/v%v/cells//.spice compile-only \
	-cdl %l/v%v/cells//.cdl ignore=topography compile-only \
	-lef %l/v%v/cells//.lef compile-only \
	-doc %l/v%v/cells//.pdf \
	-lib %l/v%v/timing/*.lib \
	-gds %l/v%v/cells//.gds compile-only \
	-verilog %l/v%v/cells//.v exclude=..v compile-only \
	-library digital sky130_fd_sc_hd \
	-library digital sky130_fd_sc_hdll \
	-library digital sky130_fd_sc_hvl \
	-library digital sky130_fd_sc_hs \
	-library digital sky130_fd_sc_ls \
	-library digital sky130_fd_sc_ms \
	-library digital sky130_fd_sc_lp \|& tee -a ${SKY130A}_install.log
	# Install OSU digital standard cells.
	${STAGE} -source ${OSU_PATH} -target ${STAGING_PATH}/${SKY130A} \
	-techlef char/techfiles/scs8.lef rename sky130_osu_sc.tlef \
	-spice lib/spice/*.spice compile-only \
	-lef outputs/s8_osu130.lef rename sky130_osu_sc.lef \
	-lib outputs/*.lib \
	-gds lib/gds/*.gds compile-only \
	-verilog outputs/VERILOG/*.v \
	-library digital sky130_osu_sc
	# Install additional model file (efabless)
	${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \
	-ngspice models/*.lib rename ${SKY130A}.lib \
	\|& tee -a ${SKY130A}_install.log
	# Install custom additions to digital libraries
	${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \
	-techlef techLEF/sky130_fd_sc_hd_tech.lef \
	-library digital sky130_fd_sc_hd \|& tee -a ${SKY130A}_install.log
	${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \
	-techlef techLEF/sky130_fd_sc_hd_tech.lef \
	rename sky130_fd_sc_hdll_tech.lef \
	-library digital sky130_fd_sc_hdll \|& tee -a ${SKY130A}_install.log
	${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \
	-techlef techLEF/sky130_fd_sc_hs_tech.lef \
	-library digital sky130_fd_sc_hs \|& tee -a ${SKY130A}_install.log
	${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \
	-techlef techLEF/sky130_fd_sc_hs_tech.lef \
	rename sky130_fd_sc_ms_tech.lef \
	-library digital sky130_fd_sc_ms \|& tee -a ${SKY130A}_install.log
	${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \
	-techlef techLEF/sky130_fd_sc_hs_tech.lef \
	rename sky130_fd_sc_ls_tech.lef \
	-library digital sky130_fd_sc_ls \|& tee -a ${SKY130A}_install.log
	# Install custom additions to I/O pad library
	${STAGE} -source ./custom -target ${STAGING_PATH}/${SKY130A} \
	-gds %l/gds/*.gds \
	-verilog %l/verilog/*.v \
	-lef %l/lef/*.lef \
	-spice %l/spice/*.spice \
	-library general sky130_fd_io \|& tee -a ${SKY130A}_install.log
	# Add correct bounding boxes on Magic layouts
	${ADDPROP} ${STAGING_PATH}/${SKY130A} sky130_fd_io sky130_fd_io_top_gpio_ovtv2 \
	"FIXED_BBOX 0 407 28000 40000"
	${ADDPROP} ${STAGING_PATH}/${SKY130A} sky130_fd_io sky130_fd_io_top_xres4v2 \
	"FIXED_BBOX 0 407 15000 40000"

	install: install-local

	install-local: install-local-a

	install-local-a:
	echo "Starting SKY130 PDK migration on "`date` > ${SKY130A}_migrate.log
	${INSTALL} -source ${STAGING_PATH}/${SKY130A} \
	-target ${LOCAL_PATH}/${SKY130A} \
	-link_from ${LINK_TARGETS} \|& tee -a ${SKY130A}_migrate.log
	echo "Ended SKY130 PDK migration on "`date` >> ${SKY130A}_migrate.log

	install-dist: install-dist-a

	install-dist-a:
	echo "Starting SKY130 PDK migration on "`date` > ${SKY130A}_migrate.log
	${INSTALL} -source ${STAGING_PATH}/${SKY130A} \
	-target ${DIST_PATH}/${SKY130A} \
	-local ${LOCAL_PATH}/${SKY130A} \
	-link_from ${DIST_LINK_TARGETS} \|& tee -a ${SKY130A}_migrate.log
	echo "Ended SKY130 PDK migration on "`date` >> ${SKY130A}_migrate.log

	clean: clean-a

	clean-a:
	${STAGE} -target ${STAGING_PATH}/${SKY130A} -clean

	veryclean: veryclean-a

	veryclean-a: clean-a
	${RM} ${SKY130A}_install.log
	${RM} ${SKY130A}_migrate.log