| See further updates in ../../../s8x/models.3.5/spice/readme |
| |
| ***************** S8 Models.3.5 beta4 Release(MRS#1984)******************************* |
| Date: 09/24/10 |
| 1) PED: NVHV/PVHV LOD model addition (will require new cadflow and re-netlist, see TCS#2115). |
| 2) MVO: NVHV/PVHV Mismatch model reduction. |
| 3) PED: NVHV Reverse Body bias Vth model fitting improvement for nvhv l=0.7, w=20,50,60. |
| 4) OVR: NVHV Gate Capacitance increase. |
| 5) PED: Added SPR 69419 workaround to fix Eldo 2009.2a bug that gave wrong FET Mismatch sims |
| ***SPR workaround is to add .option mc_ignore_binning to fix FET Mismatch problems |
| |
| ***************** S8 Models.3.5 beta3 Release(MRS#1877)******************************* |
| Date: 09/17/10 |
| 1) OVR: Updated pnppar5x model based on frz silicon data |
| 2) OVR: Added temp coeff monte-carlo model to pnppar5x model |
| |
| ***************** S8 Models.3.5 beta 2 Release ******************************* |
| By: QHC, MVO |
| 1) Added PVHV/NVHV reliability models |
| 2) Added new M5 shielded VPP's |
| |
| ***************** S8 Models.3.5 beta 1 Release ******************************* |
| By: PXG/PED/OVR |
| 1) Updated PVHV/NVHV DC/AC modelds |
| |
| ***************** S8 Models.3.4 Official Release ******************************* |
| Date: 02/25/2010 |
| By: QHC |
| 1) Removed pre-silicon nvhv from 1/22/2010 release, otherwise same as beta8 |
| |
| ***************** S8 Models.3.4 BETA8 FOR VPP OVER MOSCAP (MRS-1844) |
| Date: 02/12/2010 |
| By: QHC |
| 1) Added xcmvpp2_nhvnative10x4 and xcmvpp2_phv5x4 |
| |
| ***************** S8 Models.3.4 ALPHA1 FOR NVHV (MRS-1802 ) ******* |
| Date: 01/22/2010 |
| By: PED |
| 1) Added pre-silicon nvhv model per MRS-1802. |
| |
| ***************** S8 Models.3.4 BETA7 (MRS-1636, MS-1767, SPR) ****************** |
| Date: 12/17/2009 |
| By: QHC, PXG, PED |
| 1) QHC: RF ESD diodes now have the same resistance forward and reverse and this is based on forward measurements. |
| 2) QHC: Tuned PNPPAR beta over temperature back to cadflow values. Tempcos were maintained about the same. |
| 3) QHC: Updated phighvt varactor model to show VG and temperature dependence of biases from -1.8V to -0.8V (CMIN) |
| 4) QHC: Converted both varactor models to spice format. (SPR 61200) |
| 5) PXG: SPR-62445 Updated Diode Leakge for fnpass/sonos(flash:0.45/0.22,latch:1/0.5)to match ndiode_nvs at temp not equal to 30C |
| 6) PED: MRS-1829: Reduced leakage in tt_leak.cor and leak.cor for nhvnative w/l=10/0.9um |
| 7) MVO: MRS-1767: Updated OOB model |
| |
| ***************** S8 Models.3.4 BETA6 (MRS-1636) ****************** |
| Date: 10/20/2009 |
| By: PED |
| 1) Added forward bias resistance modeling for ESD diode modeling |
| 2) Reverted varactor changes in Beta5 back to Beta4 model results (QHC) |
| |
| ***************** S8 Models.3.4 BETA5 (MRS-1718) ****************** |
| Date: 10/09/2009 |
| By: QHC |
| 1) Implemented charge based varactor model in spice, removed Verilog-A model |
| 2) Added tempcos to Cmin for varactors |
| |
| ***************** S8 Models.3.4 BETA4 ***************************** |
| Date: 6/04/2009 |
| By: MVO |
| 1) Widened xcmimc |
| 2) Remover all NON "_b" RF FETs in s8tma-5r directory |
| |
| ***************** S8 Models.3.4 BETA3 ***************************** |
| Date: 5/08/2009 |
| By: QHC |
| 1) Added xcmimc2 |
| |
| ***************** S8 Models.3.4 BETA2 (MRS-1550)***************************** |
| Date: 4/15/2009 |
| By: OVR |
| 1) Added eval model for pnppar5x device |
| ***************** S8 Models.3.4 BETA1 ***************************** |
| Date: 12/17/2008 |
| By: PXG, MVO, QHC |
| 1) Updated Flash,Latch BOL Program corner |
| 2) Updated L=0.22 NVSSONOS program,erase corners for TBOL/BOL |
| 3) Added nlowvt optimization model for ss/ff/sf/fs |
| 4) Added phighvt optimization model for tt/ff/ss/fs/sf/leak/ttleak |
| 5) Updated VPP mismatch |
| 6) Updated nvssonos mismatch |
| |
| ***************** S8 Models.3.4 ALPHA1 ***************************** |
| Date: 12/05/2008 |
| By: PXG, MVO, OVR, QHC |
| 1) updated Nlowvt corners(ff/ss/fs/sf) for 7/0.15,removed optimization corners for ff/ss/fs/sf |
| 2) updated fnpass corners |
| 3) updated Phighvt corners for 0.64/0.18,removed optimization corners, all corners pointing to discrete corners |
| 4) VPP capacitor updated |
| 5) PVHV 5.0/0.66 device updated |
| 6) Ntvnative all W's for L=0.5 updated |
| 7) Pwell resistor updated |
| 8) Nvsrnpass 0.3/0.22 updated |
| |
| ***************** S8 Models.3.3 ***************************** |
| Date: 10/29/2008 |
| By: MVO |
| 1) Removed several discrete phighvt deviceses to align with MRGA AD |
| *********************** |
| |
| ***************** S8 Models.3.3 Beta2 *********************** |
| Date: 10/12/2008 |
| By: PXG |
| 1) SONOS(Flash and Latch) BOL/WBOL/FFEOL/SSEOL/TBOL/TTEOL/TTTEOL/FFTEOL/SSTEOL are added |
| 2) SEEPROM BOL/TBOL/WBOL/TEOL/EOL/FFTEOL/FFEOL are added |
| 3) Added mismatch for 1) and 2) |
| *********************** |
| NOTE: TO GET ACCURATE MISMATCH FOR NVSSONOS, USE GMIN/GMINDC=1E-21 |
| ********************** |
| 4) PMC models are updated |
| ***************** S8 Models.3.3 Beta1 *********************** |
| In S8tnv-5r models.3.3/s8x models.3.2 readme |
| Date: 08/29/2008 |
