| * BSIMTran Version 0.1.24, Created on 4-26-2002 |
| * Username: hai |
| * Command Line: /home/hai/config/cydir/bin/lnx86/bsimtran diode.rf diode -p -ndipw_dnw dnw_pw_iv_m31.pm dnw_pw_cv_m31.pm dipw_dnw.mod |
| * Working Directory: /home/hai/models/s8/s8tee/models.3.1/diodes/dnwell_pw |
| * Time: Fri May 18 11:15:28 2007 |
| * Rule File: diode.rf |
| * Output File: dipw_dnw.mod |
| * Input Files: |
| * (1) dnw_pw_iv_m31.pm |
| * (2) dnw_pw_cv_m31.pm |
| *copyright, Cypress Semiconductor, 2001 |
| *BSIM3.V3 Diode Model |
| |
| .param |
| + p20vhv_pwdrainjunction_mult=7.5058e-01 |
| + p20vhv_pwdrainmjswjunction_mult = 8.3390e-01 |
| + p20vhv_pwdrainpbswjunction_mult = 1.0204e+00 |
| + p20vhv_pwdrainctjunction_mult = 1.0 |
| + p20vhv_vb = 31.0 |
| + dipw_dnw_cj_mult = 1.199716e+00 |
| + dipw_dnw_mj_mult = 3.8681e-01 |
| + dipw_dnw_php_mult = 1.0 |
| + dipw_dnw_tphp_mult = 1.25 |
| + dipw_dnw_n_mult = 1.0 |
| + dipw_dnw_js_mult = 1.0 |
| |
| .model dnwdiode_pmos_de_v20 d |
| +level = 3 |
| * |
| *PARAMETERS TO MAKE MODEL INTO CADFLOW |
| * |
| +tlevc = 1 |
| +scalm = 1e-6 |
| +area = 1e12 |
| * |
| *JUNCTION CAPACITANCE PARAMETERS |
| * |
| +cj = '0.00038945*p20vhv_pwdrainjunction_mult*1e-12*dipw_dnw_ajunction_mult*dipw_dnw_cj_mult' $ farads/m^2 |
| +mj = '0.63982*p20vhv_pwdrainmjswjunction_mult*dipw_dnw_mj_mult' |
| +pb = '0.58758*p20vhv_pwdrainpbswjunction_mult' $ V |
| +cjsw = '3.743e-010*p20vhv_pwdrainjunction_mult*1e-6*dipw_dnw_pjunction_mult*dipw_dnw_cj_mult' $ farads/m |
| +mjsw = '0.80357*p20vhv_pwdrainmjswjunction_mult' |
| +php = '0.2500*p20vhv_pwdrainpbswjunction_mult*dipw_dnw_php_mult' $ V |
| +cta = '0.0016157*p20vhv_pwdrainctjunction_mult' $ 1/C |
| +ctp = '0.0008*p20vhv_pwdrainctjunction_mult' $ 1/C |
| +tpb = 0.0010003 $ V/C |
| +tphp = '0.000675*dipw_dnw_tphp_mult' $ V/C |
| * |
| *DIODE IV PARAMETERS |
| * |
| +js = '1.4693e-017*150' $ A/m^2 |
| +jsw = '7.41e-018*150' $ A/m |
| *+js = '1.4693e-017*dipw_dnw_js_mult' $ A/m^2 |
| *+jsw = '7.41e-018*dipw_dnw_js_mult' $ A/m |
| +n = '1.0791*dipw_dnw_n_mult' |
| +rs = 900 $ ohms (ohms/m^2 if area defined in netlist) |
| +ik = '2.08e-009/1e-12' $ A/m^2 |
| +ikr = '0/1e-12' $ A/m^2 |
| ******set to 40V so design can evaluate circuits using up to 36V |
| +vb = 'p20vhv_vb' $ V |
| +ibv = 0.00106 $ A |
| +trs = 0 $ 1/C |
| +xti = 3.0 |
| +eg = 0.65 $ eV |
| +tref = 30 $ C |
| * |
| *DEFAULT PARAMETERS |
| * |
| +tcv = 0 $ 1/C |
| +gap1 = 0.000473 $ eV/C |
| +gap2 = 1110 |
| +ttt1 = 0 $ 1/C |
| +ttt2 = 0 $ 1/C^2 |
| +tm1 = 0 $ 1/C |
| +tm2 = 0 $ 1/C^2 |
| +lm = 0 $ m |
| +lp = 0 $ m |
| +wm = 0 $ m |
| +wp = 0 $ m |
| +xm = 0 $ m |
| +xoi = 10000 |
| +xom = 10000 $ Angstrom |
| +xp = 0 $ m |
| +xw = 0 $ m |
| |
