| Wojciech Gryncewicz | 9039be3 | 2020-11-06 14:05:33 +0100 | [diff] [blame] | 1 | Name,Description,Flags,Value,Unit |
| 2 | (ct.1),Min and max L and W of mcon,DNF,0.170,µm |
| 3 | (ct.2),Spacing of mcon to mcon,DNF,0.190,µm |
| 4 | (ct.3),Only min. square mcons are allowed except die seal ring where mcons are…,,0.170*L, |
| 5 | (ct.4),Mcon must be enclosed by LI by at least …,P,0.000,µm |
| 6 | (ct.irdrop.1),"For 1 <= n <= 10 contacts on the same connector, mcon area pre- and post- Cu conversion must differ by no more than…",CU IR,0.2,µm |
| 7 | (ct.irdrop.2),"For 11 <= n <= 100 contacts on the same connector, mcon area pre- and post- Cu conversion must differ by no more than…",CU IR,0.3,µm |
| 8 | (ct.irdrop.3),"For n > 100 contacts on the same connector, mcon area pre- and post- Cu conversion must differ by no more than…",CU IR,0.7,µm |
