| Name,Description,Flags,Value | |
| (vhvi.vhv.1),Terminals operating at nominal 12V (maximum 16V) bias must be tagged as Very-High-Voltage (VHV) using vhvi:dg layer,NC, | |
| (vhvi.vhv.2),A source or drain of a drain-extended device can be tagged by vhvi:dg. A device with either source or drain (not both) tagged with vhvi:dg serves as a VHV propagation stopper,NC, | |
| (vhvi.vhv.3),Any feature connected to VHVSourceDrain becomes a very-high-voltage feature,NC, | |
| (vhvi.vhv.4),Any feature connected to VHVPoly becomes a very-high-voltage feature,NC, | |
| (vhvi.vhv.5),"Diffusion that is not a part of a drain-extended device (i.e., diff not areaid:en) must not be on the same net as VHVSourceDrain. Only diffusion inside :drc_tag:`areaid.ed` and LV diffusion tagged with vhvi:dg are exempted.",, | |
| (vhvi.vhv.6),"Poly resistor can act as a VHV propagation stopper. For this, it should be tagged with text ""vhv_block""",NC, | |
| (vhvi.1.-),Min width of vhvi:dg,,0.020 | |
| (vhvi.2.-),Vhvi:dg cannot overlap areaid:ce,, | |
| (vhvi.3.-),VHVGate must overlap hvi:dg,, | |
| (vhvi.4.-),Poly connected to the same net as a VHVSourceDrain must be tagged with vhvi:dg layer,, | |
| (vhvi.5.-),Vhvi:dg cannot straddle VHVSourceDrain,, | |
| (vhvi.6.-),Vhvi:dg overlapping VHVSourceDrain must not overlap poly,, | |
| (vhvi.7.-),Vhvi:dg cannot straddle VHVPoly,, |