| #!/bin/csh -f |
| |
| ## --------------------------------------------------- |
| ## i/o setup |
| ## --------------------------------------------------- |
| |
| #setenv TECHDIR # LVS DIR PATH--Eg: /local/lvs_download/018MCU |
| #setenv INCLUDE_FILE ./design_inc.cal # PATH--LVS include file |
| |
| ## --------------------------------------------------- |
| ## switch setup |
| ## --------------------------------------------------- |
| |
| setenv BEOL_STACK 1P6M # [ 1P3M | 1P4M | 1P5M | 1P6M ] |
| setenv TOPMETAL 6kA # [ 6kA | 9kA | 11kA | 30kA] |
| setenv POLY_HIGH_RESISTOR 1K # [ 1K | 2K | 3K ] |
| setenv EXTRACT_MIM_CAP 1p0fF_OPT_A # [ 1p0fF_OPT_A | 1p5fF_OPT_A | 2p0fF_OPT_A | 1p0fF_OPT_B | 1p5fF_OPT_B | 2p0fF_OPT_B ] |
| setenv ERC_RUN NO # [ YES | NO ] |
| setenv PEX_RUN NO # [ YES | NO ] default is NO |
| setenv CONNECT_THRU_DIFF_CHECK NO # [ YES | NO ] |
| setenv MOS_NF_BY SPLIT # [ COUNT | SPLIT ] |
