rules/klayout/drc/rule_decks/mcell.drc

# Copyright 2022 GlobalFoundries PDK Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#=============================================================================================================================================================
#------------------------------------------------------------ GF 0.18um MCU DRC RULE DECK (MCELL) ------------------------------------------------------------
#=============================================================================================================================================================

require 'time'
require "logger"

exec_start_time = Time.now

logger = Logger.new(STDOUT)

logger.formatter = proc do |severity, datetime, progname, msg|
  "#{datetime}: Memory Usage (" + `pmap #{Process.pid} | tail -1`[10,40].strip + ") : #{msg}
"
end

#================================================
#----------------- FILE SETUP -------------------
#================================================

# optional for a batch launch :   klayout -b -r gf180mcu.drc -rd input=design.gds -rd report=gf180mcu_main.lyrdb

logger.info("Starting running GF180MCU Klayout DRC runset on %s" % [$input])

if $input
    if $topcell
        source($input, $topcell)
    else
        source($input)
    end
end

logger.info("Loading database to memory is complete.")

if $report
    logger.info("GF180MCU Klayout DRC runset output at: %s" % [$report])
    report("DRC Run Report at", $report)
else
    logger.info("GF180MCU Klayout DRC runset output at default location." % [File.join(File.dirname(RBA::CellView::active.filename), "gf180_drc.lyrdb").path])
    report("DRC Run Report at", File.join(File.dirname(RBA::CellView::active.filename), "gf180_drc.lyrdb"))
end

if $thr
    logger.info("Number of threads to use %s" % [$thr])
    threads($thr)
else
    logger.info("Number of threads to use 16")
    threads(16)
end

# === TILING MODE ===
if $run_mode == "tiling"
  # use a tile size of 1mm - not used in deep mode-
  # tiles(500.um)
  # use a tile border of 10 micron:
  # tile_borders(10.um)
  tiles(1000)
  logger.info("Tiling  mode is enabled.")

elsif $run_mode == "deep"
  #=== HIER MODE ===
  deep
  logger.info("deep  mode is enabled.")

elsif $run_mode == "flat"
  #=== FLAT MODE ===
  flat
  logger.info("flat  mode is enabled.")

else
  #=== FLAT MODE ===
  flat
  logger.info("flat  mode is enabled.")

end # run_mode

#================================================
#------------- LAYERS DEFINITIONS ---------------
#================================================

v5_xtor        = polygons(112, 1 )
dualgate       = polygons(55 , 0 )
poly2          = polygons(30 , 0 )
nplus          = polygons(32 , 0 )
pplus          = polygons(31 , 0 )
comp           = polygons(22 , 0 )
mcell_feol_mk  = polygons(11 , 17)

logger.info("Starting deriving base layers.")
#================================================
#------------- LAYERS DERIVATIONS ---------------
#================================================

ncomp      =  comp      & nplus
pcomp      =  comp      & pplus
tgate      =  poly2     & comp
ngate      =  nplus     & tgate
pgate      =  pplus     & tgate

#================================================
#------------------ SWITCHES --------------------
#================================================
logger.info("Evaluate switches.")

# FEOL
if $feol == "false"
  FEOL = $feol
  logger.info("FEOL is disabled.")
else
  FEOL = "true"
  logger.info("FEOL is enabled.")
end # FEOL

# BEOL
if $beol == "false"
  BEOL = $beol
  logger.info("BEOL is disabled.")
else
  BEOL = "true"
  logger.info("BEOL is enabled.")
end # BEOL

# connectivity rules
if $conn_drc == "true"
  CONNECTIVITY_RULES = $conn_drc
  logger.info("connectivity rules are enabled.")
else
  CONNECTIVITY_RULES = false
  logger.info("connectivity rules are disabled.")
end # connectivity rules

# METAL_TOP
if $metal_top
  METAL_TOP = $metal_top
else
  METAL_TOP = "9K"
end # METAL_TOP

logger.info("METAL_TOP Selected is %s" % [METAL_TOP])

# METAL_LEVEL
if $metal_level
  METAL_LEVEL = $metal_level
else
  METAL_LEVEL = "6LM"
end # METAL_LEVEL

logger.info("METAL_STACK Selected is %s" % [METAL_LEVEL])

# WEDGE
if $wedge == "false"
  WEDGE = $wedge
else
  WEDGE = "true"
end # WEDGE

logger.info("Wedge enabled  %s" % [WEDGE])

# BALL
if $ball == "false"
  BALL = $ball
else
  BALL = "true"
end # BALL

logger.info("Ball enabled  %s" % [BALL])

# GOLD
if $gold == "false"
  GOLD = $gold
else
  GOLD = "true"
end # GOLD

logger.info("Gold enabled  %s" % [GOLD])

if $mim_option
  MIM_OPTION = $mim_option
else
  MIM_OPTION = "Nan"
end

logger.info("MIM Option selected %s" % [MIM_OPTION])

# OFFGRID
if $offgrid == "false"
  OFFGRID = false
else
  OFFGRID = true
end # OFFGRID

logger.info("Offgrid enabled  %s" % [OFFGRID])

#================================================
#---------------------MCELL----------------------
#================================================

# Rule MC.1: min. mcell width is 0.4µm
logger.info("Executing rule MC.1")
mc1_l1  = mcell_feol_mk.width(0.4.um, euclidian).polygons(0.001)
mc1_l1.output("MC.1", "MC.1 : min. mcell width : 0.4µm")
mc1_l1.forget

# Rule MC.2: min. mcell spacing is 0.4µm
logger.info("Executing rule MC.2")
mc2_l1  = mcell_feol_mk.space(0.4.um, euclidian).polygons(0.001)
mc2_l1.output("MC.2", "MC.2 : min. mcell spacing : 0.4µm")
mc2_l1.forget

# Rule MC.3: Minimum Mcell area is 0.35µm²
logger.info("Executing rule MC.3")
mc3_l1  = mcell_feol_mk.with_area(nil, 0.35.um)
mc3_l1.output("MC.3", "MC.3 : Minimum Mcell area : 0.35µm²")
mc3_l1.forget
# Rule MC.4: Minimum area enclosed by Mcell is 0.35µm²
logger.info("Executing rule MC.4")
mc4_l1  = mcell_feol_mk.holes.with_area(nil, 0.35.um)
mc4_l1.output("MC.4", "MC.4 : Minimum area enclosed by Mcell : 0.35µm²")
mc4_l1.forget

exec_end_time = Time.now
run_time = exec_end_time - exec_start_time
logger.info("DRC Run time %f seconds" % [run_time])