| # Copyright 2022 GlobalFoundries PDK Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # https://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| #============================================================================================================================================================= |
| #------------------------------------------------------ GF 0.18um MCU DRC RULE DECK (N+ POLY RESISTOR) ------------------------------------------------------- |
| #============================================================================================================================================================= |
| |
| require 'time' |
| require "logger" |
| |
| exec_start_time = Time.now |
| |
| logger = Logger.new(STDOUT) |
| |
| logger.formatter = proc do |severity, datetime, progname, msg| |
| "#{datetime}: Memory Usage (" + `pmap #{Process.pid} | tail -1`[10,40].strip + ") : #{msg} |
| " |
| end |
| |
| #================================================ |
| #----------------- FILE SETUP ------------------- |
| #================================================ |
| |
| # optional for a batch launch : klayout -b -r gf180mcu.drc -rd input=design.gds -rd report=gf180mcu_main.lyrdb |
| |
| logger.info("Starting running GF180MCU Klayout DRC runset on %s" % [$input]) |
| |
| if $input |
| if $topcell |
| source($input, $topcell) |
| else |
| source($input) |
| end |
| end |
| |
| logger.info("Loading database to memory is complete.") |
| |
| if $report |
| logger.info("GF180MCU Klayout DRC runset output at: %s" % [$report]) |
| report("DRC Run Report at", $report) |
| else |
| logger.info("GF180MCU Klayout DRC runset output at default location." % [File.join(File.dirname(RBA::CellView::active.filename), "gf180_drc.lyrdb").path]) |
| report("DRC Run Report at", File.join(File.dirname(RBA::CellView::active.filename), "gf180_drc.lyrdb")) |
| end |
| |
| if $thr |
| logger.info("Number of threads to use %s" % [$thr]) |
| threads($thr) |
| else |
| logger.info("Number of threads to use 16") |
| threads(16) |
| end |
| |
| # === TILING MODE === |
| if $run_mode == "tiling" |
| # use a tile size of 1mm - not used in deep mode- |
| # tiles(500.um) |
| # use a tile border of 10 micron: |
| # tile_borders(10.um) |
| tiles(1000) |
| logger.info("Tiling mode is enabled.") |
| |
| elsif $run_mode == "deep" |
| #=== HIER MODE === |
| deep |
| logger.info("deep mode is enabled.") |
| |
| elsif $run_mode == "flat" |
| #=== FLAT MODE === |
| flat |
| logger.info("flat mode is enabled.") |
| |
| else |
| #=== FLAT MODE === |
| flat |
| logger.info("flat mode is enabled.") |
| |
| end # run_mode |
| |
| #================================================ |
| #------------- LAYERS DEFINITIONS --------------- |
| #================================================ |
| |
| v5_xtor = polygons(112, 1 ) |
| dualgate = polygons(55 , 0 ) |
| poly2 = polygons(30 , 0 ) |
| nplus = polygons(32 , 0 ) |
| pplus = polygons(31 , 0 ) |
| comp = polygons(22 , 0 ) |
| sab = polygons(49 , 0 ) |
| contact = polygons(33 , 0 ) |
| resistor = polygons(62 , 0 ) |
| res_mk = polygons(110, 5 ) |
| |
| logger.info("Starting deriving base layers.") |
| #================================================ |
| #------------- LAYERS DERIVATIONS --------------- |
| #================================================ |
| |
| ncomp = comp & nplus |
| pcomp = comp & pplus |
| tgate = poly2 & comp |
| ngate = nplus & tgate |
| pgate = pplus & tgate |
| |
| #================================================ |
| #------------------ SWITCHES -------------------- |
| #================================================ |
| logger.info("Evaluate switches.") |
| |
| # FEOL |
| if $feol == "false" |
| FEOL = $feol |
| logger.info("FEOL is disabled.") |
| else |
| FEOL = "true" |
| logger.info("FEOL is enabled.") |
| end # FEOL |
| |
| # BEOL |
| if $beol == "false" |
| BEOL = $beol |
| logger.info("BEOL is disabled.") |
| else |
| BEOL = "true" |
| logger.info("BEOL is enabled.") |
| end # BEOL |
| |
| # connectivity rules |
| if $conn_drc == "true" |
| CONNECTIVITY_RULES = $conn_drc |
| logger.info("connectivity rules are enabled.") |
| else |
| CONNECTIVITY_RULES = false |
| logger.info("connectivity rules are disabled.") |
| end # connectivity rules |
| |
| # METAL_TOP |
| if $metal_top |
| METAL_TOP = $metal_top |
| else |
| METAL_TOP = "9K" |
| end # METAL_TOP |
| |
| logger.info("METAL_TOP Selected is %s" % [METAL_TOP]) |
| |
| # METAL_LEVEL |
| if $metal_level |
| METAL_LEVEL = $metal_level |
| else |
| METAL_LEVEL = "6LM" |
| end # METAL_LEVEL |
| |
| logger.info("METAL_STACK Selected is %s" % [METAL_LEVEL]) |
| |
| # WEDGE |
| if $wedge == "false" |
| WEDGE = $wedge |
| else |
| WEDGE = "true" |
| end # WEDGE |
| |
| logger.info("Wedge enabled %s" % [WEDGE]) |
| |
| # BALL |
| if $ball == "false" |
| BALL = $ball |
| else |
| BALL = "true" |
| end # BALL |
| |
| logger.info("Ball enabled %s" % [BALL]) |
| |
| # GOLD |
| if $gold == "false" |
| GOLD = $gold |
| else |
| GOLD = "true" |
| end # GOLD |
| |
| logger.info("Gold enabled %s" % [GOLD]) |
| |
| if $mim_option |
| MIM_OPTION = $mim_option |
| else |
| MIM_OPTION = "Nan" |
| end |
| |
| logger.info("MIM Option selected %s" % [MIM_OPTION]) |
| |
| # OFFGRID |
| if $offgrid == "false" |
| OFFGRID = false |
| else |
| OFFGRID = true |
| end # OFFGRID |
| |
| logger.info("Offgrid enabled %s" % [OFFGRID]) |
| |
| #================================================ |
| #----------------N+ POLY RESISTOR---------------- |
| #================================================ |
| |
| lres_poly = poly2.and(nplus).interacting(sab).interacting(res_mk) |
| # Rule LRES.1: Minimum width of Poly2 resistor. is 0.8µm |
| logger.info("Executing rule LRES.1") |
| lres1_l1 = lres_poly.width(0.8.um, euclidian).polygons(0.001) |
| lres1_l1.output("LRES.1", "LRES.1 : Minimum width of Poly2 resistor. : 0.8µm") |
| lres1_l1.forget |
| |
| # Rule LRES.2: Minimum space between Poly2 resistors. is 0.4µm |
| logger.info("Executing rule LRES.2") |
| lres2_l1 = lres_poly.isolated(0.4.um, euclidian).polygons(0.001) |
| lres2_l1.output("LRES.2", "LRES.2 : Minimum space between Poly2 resistors. : 0.4µm") |
| lres2_l1.forget |
| |
| # Rule LRES.3: Minimum space from Poly2 resistor to COMP. |
| logger.info("Executing rule LRES.3") |
| lres3_l1 = lres_poly.separation(comp, 0.6.um, euclidian).polygons(0.001).or(comp.not_outside(lres_poly)) |
| lres3_l1.output("LRES.3", "LRES.3 : Minimum space from Poly2 resistor to COMP.") |
| lres3_l1.forget |
| |
| # Rule LRES.4: Minimum space from Poly2 resistor to unrelated Poly2. is 0.6µm |
| logger.info("Executing rule LRES.4") |
| lres4_l1 = lres_poly.separation(poly2.not_interacting(sab), 0.6.um, euclidian).polygons(0.001) |
| lres4_l1.output("LRES.4", "LRES.4 : Minimum space from Poly2 resistor to unrelated Poly2. : 0.6µm") |
| lres4_l1.forget |
| |
| # Rule LRES.5: Minimum Nplus implant overlap of Poly2 resistor. is 0.3µm |
| logger.info("Executing rule LRES.5") |
| lres5_l1 = nplus.enclosing(poly2.and(nplus).interacting(sab).interacting(res_mk), 0.3.um, euclidian).polygons(0.001) |
| lres5_l2 = poly2.and(nplus).interacting(sab).interacting(res_mk).not_outside(nplus).not(nplus) |
| lres5_l = lres5_l1.or(lres5_l2) |
| lres5_l.output("LRES.5", "LRES.5 : Minimum Nplus implant overlap of Poly2 resistor. : 0.3µm") |
| lres5_l1.forget |
| lres5_l2.forget |
| lres5_l.forget |
| |
| # Rule LRES.6: Minimum salicide block overlap of Poly2 resistor in width direction. is 0.28µm |
| logger.info("Executing rule LRES.6") |
| lres6_l1 = sab.enclosing(lres_poly,0.28.um).polygons(0.001) |
| lres6_l1.output("LRES.6", "LRES.6 : Minimum salicide block overlap of Poly2 resistor in width direction. : 0.28µm") |
| lres6_l1.forget |
| |
| cont_lres7 = contact.inside(poly2.and(nplus).interacting(sab).interacting(res_mk)) |
| # Rule LRES.7: Space from salicide block to contact on Poly2 resistor. |
| logger.info("Executing rule LRES.7") |
| lres7_l1 = cont_lres7.separation(sab,0.22.um).polygons(0.001).or(cont_lres7.interacting(sab)) |
| lres7_l1.output("LRES.7", "LRES.7 : Space from salicide block to contact on Poly2 resistor.") |
| lres7_l1.forget |
| |
| cont_lres7.forget |
| # rule LRES.8 is not a DRC check |
| |
| mk_lres9 = res_mk.edges.not(poly2.and(nplus).and(sab).edges).inside_part(poly2) |
| # Rule LRES.9a: Nplus Poly2 resistor shall be covered by RES_MK marking. RES_MK length shall be coincide with resistor length (Defined by SAB length) and width covering the width of Poly2. |
| logger.info("Executing rule LRES.9a") |
| lres9a_l1 = res_mk.interacting(lres_poly).interacting(mk_lres9) |
| lres9a_l1.output("LRES.9a", "LRES.9a : Nplus Poly2 resistor shall be covered by RES_MK marking. RES_MK length shall be coincide with resistor length (Defined by SAB length) and width covering the width of Poly2. ") |
| lres9a_l1.forget |
| |
| mk_lres9.forget |
| lres9b = res_mk.with_area(15000.01.um,nil).in(res_mk.interacting(res_mk.edges.with_length(80.01.um,nil))) |
| # Rule LRES.9b: If the size of single RES_MK mark layer is greater than 15000um2 and both side (X and Y) are greater than 80um. then the minimum spacing to adjacent RES_MK layer. is 20µm |
| logger.info("Executing rule LRES.9b") |
| lres9b_l1 = res_mk.interacting(lres_poly).drc(separation(lres9b) < 20.um).polygons(0.001) |
| lres9b_l1.output("LRES.9b", "LRES.9b : If the size of single RES_MK mark layer is greater than 15000um2 and both side (X and Y) are greater than 80um. then the minimum spacing to adjacent RES_MK layer. : 20µm") |
| lres9b_l1.forget |
| |
| lres9b.forget |
| lres_poly.forget |
| |
| exec_end_time = Time.now |
| run_time = exec_end_time - exec_start_time |
| logger.info("DRC Run time %f seconds" % [run_time]) |
| |