docs/ULL/physical_verification/design_manual/tables_clear/7.8_Nplus.csv

RULE NO. ,DESCRIPTION ,LAYOUT RULE
Layer ,NP --- Nplus Implant,
NP.1 ,Min. Nplus Width ,0.40
NP.2 ,Min. Nplus space (Merge if the space is less than 0.4um),  0.40
NP.3a ,"Min. Nplus Space to PCOMP for PCOMP: 
(1) Inside Nwell
(2) Outside LVPWELL but inside DNWELL","
0.16
0.16"
NP.3b ,"Min. Nplus Space to PCOMP: For Inside DNWELL: 
(i) For LVPWELL enclose PCOMP < 0.43μm
(ii) For LVPWELL enclose PCOMP ≥ 0.43μm","
0.16
0.08"
NP.3c ,"Min. Nplus Space to PCOMP: For Outside DNWELL:: 
(i) For PCOMP space to Nwell < 0.43μm
(ii) For PCOMP space to Nwell ≥ 0.43μm","
0.16
0.08"
NP.3d ,Min/max Nplus overlap of Pplus ,0.00
NP.3e ,Min. Nplus Space to related PCOMP edge adjacent to a butting edge ,0.00
NP.4a ,Min. Nplus Space to related P-channel gate at a butting edge parallel to gate ,0.32
NP.4b ,"Within 0.32μm of channel the space to P-channel gate extension perpendicular
to the direction of Poly2",0.22
NP.5a ,Min. Nplus extend beyond COMP under N-channel gate ,0.23
NP.5b ,"Min. Nplus Extension beyond COMP for the COMP: 
(1) Inside LVPWELL
(2) outside Nwell and DNWELL","
0.16
0.16"
NP.5c ,"Min. Nplus Extend beyond COMP: For Inside DNWELL: 
(i) For Nplus < 0.43μm from LVPWELL edge for Nwell tap inside DNWELL
(ii) For Nplus ≥ 0.43μm from LVPWELL edge for Nwell tap inside DNWELL","
0.16
0.02"
NP.5d ,"Min. Nplus Extend beyond COMP: For Outside DNWELL: 
(i) For Nwell enclose Nplus < 0.43μm
(ii) or Nwell enclose Nplus ≥ 0.43μm","
0.16
0.02"
NP.6 ,Min. NCOMP extension beyond NCOMP/PCOMP butted edge ,0.22
NP.7 ,Min. Nplus Space to unsalicided Poly2 [Unrelated], 0.18
NP.8a ,Minimum Nplus area ,0.35 μm2
NP.8b ,Min. Nplus hole,0.35 μm2
NP.9 ,Min. Nplus enclose unsalicided Poly2 ,0.18
NP.10 ,Min. Nplus enclose unsalicided COMP ,0.18
NP.11 ,"Butting Nplus and PCOMP is forbidden within 0.43μm of Nwell edge (for
outside DNWELL) and of LVPWELL edge (for inside DNWELL case).",
NP.12 ,"Overlap with P-channel poly2 gate extension is forbidden within 0.32μm of
P-channel gate",