docs/ULL/physical_verification/design_manual/drm_07_10.rst

7.10 Salicide Block (SAB)
=================================

 .. csv-table:: SAB
    :file: tables_clear/7.10_SAB.csv
    :widths: 100, 200 , 300

.. note::

    1. Refer to section 14.6 on ESD design guideline of Salicide Block to Poly2 Gate.

    2. If both salicide block and contact are NOT OUTSIDE OTP_MK, pls refer SB.4_2
       If either of salicide and contact is OUTSIDE OTP_MK, pls refer SB.4_1

    .. image:: images/SAB_otp.png
        :width: 800
        :align: center
        :alt: SAB_otp

    3. If both salicide block and poly2 are NOT OUTSIDE OTP_MK, pls refer SB.5a_2, SB.5b_2 and SB.9_2
       If either of salicide block and poly2 is OUTSIDE OTP_MK, pls refer SB.5a_1, SB.5b_1 and SB.9_1
       
.. image:: images/SAB.png
    :width: 800
    :align: center
    :alt: SAB2