| 11.1 Pplus POLY2 Resistor |
| ================================= |
| |
| This section describes rules for Pplus Poly2 resistor. The length of the resistor is defined by SAB (salicide block) |
| layer and width by Poly2 layer. All High Voltage Poly2 resistors shall be covered by “HVPOLYRS” Marking |
| layer (to identify HV Poly2 resistors) |
| |
| .. csv-table:: PRES |
| :file: tables_clear/11.1_PRES.csv |
| :widths: 100, 200 , 300 , 300 |
| |
| * Note : HVPOLY resistors here imply resistors with operating voltage greater than 6V in comparison to the substrate |
| potential underneath. For example a poly2 resistor used for 30V application |
| |
| .. image:: images/PRES.png |
| :width: 900 |
| :align: center |
| :alt: PRES |
