| 3.0 Layout Information |
| ====================== |
| |
| 3.1 The layout rules defined in this document are expressed in microns (μm). |
| |
| 3.2 All drawn dimensions are the same as the finished silicon dimensions. |
| |
| 3.3 There should not be any notches of geometry smaller than the allowed minimum spacing. |
| |
| 3.4 Consistent layout all designs on a 0.005μm grid will avoid off-grid and snapping issues during database fracturing. |
| |
| 3.5 All drawings and schematics in this document are not drawn to scale. |
| |
| 3.6 Only 90 deg and 45 deg bends are allowed for poly and metal lines. |
| |
| 3.7 All dimensions in this document are considered minimum unless otherwise stated. |
| |
