| 10.10 OTP_MK Mark Layer | |
| ======================= | |
| This layer is used to mark 3.3V OTP cells. OTP cells with this marking layer should follow below specific rules which is different from 3.3V/(5V)6V rules. | |
| .. csv-table:: OTP_MK | |
| :file: tables_clear/41_OTP_MK_Mark_106.csv | |
| :widths: 100, 800, 150, 150 | |
| :align: center | |
| .. note:: | |
| \* Rules allowed minimum overlap and spacing are 0, so DRC deck will not check those rules | |
| 1. Rule of 5V OTP is set by utilizing “V5_XTOR” and “OTP_MK” marking layer | |
| .. image:: images/OTP_MK1.png | |
| :width: 600 | |
| :align: center | |
| :alt: OTP_MK | |
| .. image:: images/OTP_MK2.png | |
| :width: 600 | |
| :align: center | |
| :alt: OTP_MK | |