| RULE NO.,DESCRIPTION,LAYOUT, |
| Layer,LPW = LVPWELL,3.3V ,5V/6V |
| LPW.1,Min. LVPWELL Width,0.6,0.74 |
| LPW.2a,Min. LVPWELL to LVPWELL Space (Inside DNWELL) [Different potential],1.4,1.7 |
| LPW.2b,Min. LVPWELL to LVPWELL Space [Equi potential],0.86,0.86 |
| LPW.3,Min. DNWELL enclose LVPWELL,2.5,2.5 |
| LPW.4*,"If LVPWELL is used as resistor, it must be covered by RES_MK (for LVS purpose). |
| |
| Width of the resistor determined by LVPWELL. Length by COMP-to-COMP space. |
| |
| RES_MK length shall be coinciding with resistor length (Touching COMP each side) and width covering the width of LVPWELL.",, |
| LPW.5,LVPWELL resistors must be enclosed by DNWELL,, |
| Note.1 **,Recommended Min. width to achieve stable LVPWELL resistor.,2,2 |
