blob: 4996d415032869ac6047d1431ec9cb5254985408 [file] [log] [blame]
3.0 Layout Information
======================
3.1 The layout rules defined in this document are expressed in microns m).
3.2 All drawn dimensions are the same as the finished silicon dimensions.
3.3 There should not be any notches of geometry smaller than the allowed minimum spacing.
3.4 Consistent layout all designs on a 0.005μm grid will avoid off-grid and snapping issues during database fracturing.
3.5 All drawings and schematics in this document are not drawn to scale.
3.6 Only 90 deg and 45 deg bends are allowed for poly and metal lines.
3.7 All dimensions in this document are considered minimum unless otherwise stated.