docs/physical_verification/design_manual/tables_clear/10_Design_Geometry_Rules27.csv - gf180mcu-pdk - Git at Google

 Rule No.,Description
 GRID,The design grid must be an integer multiple of 0.005μm.
 OFFGRID,All edge boundaries must be snapped to the grid defined above.
 ACUTE,All shapes must be orthogonal or on a 45° unless otherwise stated.
	Rule No.,Description
	GRID,The design grid must be an integer multiple of 0.005μm.
	OFFGRID,All edge boundaries must be snapped to the grid defined above.
	ACUTE,All shapes must be orthogonal or on a 45° unless otherwise stated.