| RULE NO.,DESCRIPTION,LAYOUT, |
| ,,3.3V ,5V/6V |
| Y. NW.2b,"Min. Nwell Space (Outside DNWELL, Inside YMTP_MK) [Different potential]",1,1 |
| Y.DF.4d,(Nwell overlap of NCOMP) outside DNWELL (inside YMTP_MK) is allowed,, |
| Y.DF.6,"Min. COMP extend beyond gate (it also means source/drain overhang) inside |
| YMTP_MK",NA ,0.15 |
| Y.DF.16,"Min. space from (Nwell outside DNWELL) to (unrelated NCOMP outside |
| Nwell and DNWELL) (inside YMTP_MK)",0.27,0.23 |
| Y.PL.1,Interconnect Width (inside YMTP_MK),0.13,NA |
| Y.PL.2,Gate Width (Channel Length) (inside YMTP_MK),0.13,0.47 |
| Y.PL.4,Poly2 extension beyond COMP to form Poly2 end cap (inside YMTP_MK),NA ,0.16 |
| Y.PL.5a,"Space from field Poly2 to unrelated COMP (inside YMTP_MK) |
| |
| Spacer from field Poly2 to Guard-ring (inside YMTP_MK)",0.04,0.2 |
| Y.PL.5b,Space from field Poly2 to related COMP (inside YMTP_MK),0.04,0.2 |
| Y.PL.6,90 deg bends on the COMP are not allowed (except YMTP_MK),, |
| Y.LU.3,"This rule is to check: |
| (a) Max. Psub tap space to every point on the boundary of |
| NCOMP outside NWELL. |
| |
| (b) For within 50um from the (NCOMP in Psub), Minimum NWELL to |
| (NCOMP outside Nwell) space is defined as y, |
| |
| (c) If y <1.0um, then Max. Psub tap space to every point on the boundary of |
| NCOMP outside NWELL. (inside YMTP_MK)",20, NA |