| *SPICE netlist created from verilog structural netlist module ring_osc2x13 by vlog2Spice (qflow) |
| *This file may contain array delimiters, not for use in simulation. |
| |
| ** Start of included library /ef/tech/SW/EFS8A/libs.ref/spi/scs8hd/scs8hd.spi |
| * Additional subcircuits not in the vendor CDL library |
| |
| .SUBCKT scs8hd_diode_1 DIODE vgnd vnb vpb vpwr |
| *.PININFO DIODE:I vgnd:I vnb:I vpb:I vpwr:I |
| * NOTE: Tap diode is not considered a primitive device and is not represented |
| * here. |
| .ENDS |
| |
| |
| |
| ******* EOF |
| |
| * Additional subcircuits not in the vendor CDL library |
| |
| .SUBCKT scs8hd_diode_2 DIODE vgnd vnb vpb vpwr |
| *.PININFO DIODE:I vgnd:I vnb:I vpb:I vpwr:I |
| * NOTE: Tap diode is not considered a primitive device and is not represented |
| * here. |
| .ENDS |
| |
| |
| ******* EOF |
| |
| .SUBCKT scs8hd_xnor2_1 A B Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMNnand0 vgnd A sndNA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand1 sndNA B inand vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 nmid A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 nmid B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 Y inand nmid vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand0 inand A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand1 inand B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 sndPA B Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 Y inand vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a2111o_1 A1 A2 B1 C1 D1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I D1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 pndC C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPD0 y D1 pndC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMND0 y D1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a2111o_2 A1 A2 B1 C1 D1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I D1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 pndC C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPD0 y D1 pndC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMND0 y D1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a2111o_4 A1 A2 B1 C1 D1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I D1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 pndC C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPD0 y D1 pndC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMND0 y D1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a2111oi_0 A1 A2 B1 C1 D1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I D1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 pndC C1 pndB vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPD0 Y D1 pndC vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMND0 Y D1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a2111oi_1 A1 A2 B1 C1 D1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I D1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 pndC C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPD0 Y D1 pndC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMND0 Y D1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a2111oi_2 A1 A2 B1 C1 D1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I D1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 pndC C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPD0 Y D1 pndC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMND0 Y D1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a2111oi_4 A1 A2 B1 C1 D1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I D1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 pndC C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPD0 Y D1 pndC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMND0 Y D1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a211o_1 A1 A2 B1 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a211o_2 A1 A2 B1 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a211o_4 A1 A2 B1 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a211oi_1 A1 A2 B1 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 Y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a211oi_2 A1 A2 B1 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 Y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a211oi_4 A1 A2 B1 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 Y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a21bo_1 A1 A2 B1N X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1N:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPB1N B1 B1N vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINB1N B1 B1N vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a21bo_2 A1 A2 B1N X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1N:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPB1N B1 B1N vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINB1N B1 B1N vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a21bo_4 A1 A2 B1N X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1N:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPB1N B1 B1N vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINB1N B1 B1N vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a21boi_0 A1 A2 B1N Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1N:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 net40 A1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 net40 A2 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 net40 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPB1N B1 B1N vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINB1N B1 B1N vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a21boi_1 A1 A2 B1N Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1N:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 net40 A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 net40 A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 net40 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPB1N B1 B1N vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINB1N B1 B1N vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a21boi_2 A1 A2 B1N Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1N:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 net40 A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 net40 A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 net40 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPB1N B1 B1N vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINB1N B1 B1N vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a21boi_4 A1 A2 B1N Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1N:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 net40 A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 net40 A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 net40 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPB1N B1 B1N vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINB1N B1 B1N vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a21o_1 A1 A2 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a21o_2 A1 A2 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a21o_4 A1 A2 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a21oi_1 A1 A2 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a21oi_2 A1 A2 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a21oi_4 A1 A2 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a221o_1 A1 A2 B1 B2 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 pndB B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a221o_2 A1 A2 B1 B2 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 pndB B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a221o_4 A1 A2 B1 B2 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 pndB B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a221oi_1 A1 A2 B1 B2 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 pndB B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 Y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a221oi_2 A1 A2 B1 B2 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 pndB B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 Y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a221oi_4 A1 A2 B1 B2 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 pndB B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 Y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a222oi_1 A1 A2 B1 B2 C1 C2 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I C1:I C2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 pndB B2 pndA vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 Y C1 pndB vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI8 Y C2 pndB vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 sndB1 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 net62 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI10 net62 C2 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a22o_1 A1 A2 B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 y B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a22o_2 A1 A2 B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 y B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a22o_4 A1 A2 B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 y B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a22oi_1 A1 A2 B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 Y B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a22oi_2 A1 A2 B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 Y B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a22oi_4 A1 A2 B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 Y B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a2bb2o_1 A1N A2N B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1N:I A2N:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnor0 inor A1N vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnor1 inor A2N vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 vgnd B1 sndNB1 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 sndNB1 B2 y vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 y inor vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 y inor pmid vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor0 vpwr A1N sndPA1N vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor1 sndPA1N A2N inor vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 pmid B1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 pmid B2 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a2bb2o_2 A1N A2N B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1N:I A2N:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnor0 inor A1N vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnor1 inor A2N vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 vgnd B1 sndNB1 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 sndNB1 B2 y vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 y inor vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 y inor pmid vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor0 vpwr A1N sndPA1N vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor1 sndPA1N A2N inor vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 pmid B1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 pmid B2 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a2bb2o_4 A1N A2N B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1N:I A2N:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnor0 inor A1N vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnor1 inor A2N vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 vgnd B1 sndNB1 vnb nshort W=0.65 L=0.15 SA=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 sndNB1 B2 y vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 y inor vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 y inor pmid vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor0 vpwr A1N sndPA1N vpb phighvt W=1.0 L=0.15 SA=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor1 sndPA1N A2N inor vpb phighvt W=1.0 L=0.15 SA=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 pmid B1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 pmid B2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a2bb2oi_1 A1N A2N B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1N:I A2N:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMNnor0 inor A1N vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnor1 inor A2N vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 vgnd B1 sndNB1 vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 sndNB1 B2 Y vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 Y inor vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor0 vpwr A1N sndPA1N vpb phighvt W=1.0 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor1 sndPA1N A2N inor vpb phighvt W=1.0 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 pmid B1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 pmid B2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 Y inor pmid vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a2bb2oi_2 A1N A2N B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1N:I A2N:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMNnor0 inor A1N vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnor1 inor A2N vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 vgnd B1 sndNB1 vnb nshort W=0.65 L=0.15 SA=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 sndNB1 B2 Y vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 Y inor vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor0 vpwr A1N sndPA1N vpb phighvt W=1.0 L=0.15 SA=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor1 sndPA1N A2N inor vpb phighvt W=1.0 L=0.15 SA=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 pmid B1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 pmid B2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 Y inor pmid vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a2bb2oi_4 A1N A2N B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1N:I A2N:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMNnor0 inor A1N vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnor1 inor A2N vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 vgnd B1 sndNB1 vnb nshort W=0.65 L=0.15 SA=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 sndNB1 B2 Y vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 Y inor vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor0 vpwr A1N sndPA1N vpb phighvt W=1.0 L=0.15 SA=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor1 sndPA1N A2N inor vpb phighvt W=1.0 L=0.15 SA=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 pmid B1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 pmid B2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 Y inor pmid vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a311o_1 A1 A2 A3 B1 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a311o_2 A1 A2 A3 B1 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a311o_4 A1 A2 A3 B1 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a311oi_1 A1 A2 A3 B1 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 Y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a311oi_2 A1 A2 A3 B1 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 Y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a311oi_4 A1 A2 A3 B1 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 pndB B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 Y C1 pndB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a31o_1 A1 A2 A3 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a31o_2 A1 A2 A3 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a31o_4 A1 A2 A3 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a31oi_1 A1 A2 A3 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a31oi_2 A1 A2 A3 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a31oi_4 A1 A2 A3 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a32o_1 A1 A2 A3 B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 y B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a32o_2 A1 A2 A3 B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 y B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a32o_4 A1 A2 A3 B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 y B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a32oi_1 A1 A2 A3 B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 Y B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a32oi_2 A1 A2 A3 B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 Y B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a32oi_4 A1 A2 A3 B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 Y B2 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 sndB1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 sndB1 B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a41o_1 A1 A2 A3 A4 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I A4:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA3 pndA A4 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 sndA3 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA3 sndA3 A4 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a41o_2 A1 A2 A3 A4 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I A4:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA3 pndA A4 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 sndA3 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA3 sndA3 A4 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a41o_4 A1 A2 A3 A4 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I A4:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA3 pndA A4 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 sndA3 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA3 sndA3 A4 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a41oi_1 A1 A2 A3 A4 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I A4:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA3 pndA A4 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 sndA3 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA3 sndA3 A4 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a41oi_2 A1 A2 A3 A4 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I A4:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA3 pndA A4 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 sndA3 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA3 sndA3 A4 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_a41oi_4 A1 A2 A3 A4 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I A4:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 pndA A1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 pndA A2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 pndA A3 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA3 pndA A4 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 Y B1 pndA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 Y A1 sndA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 sndA1 A2 sndA2 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 sndA2 A3 sndA3 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA3 sndA3 A4 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and2_0 A B X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 X y vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 X y vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and2_1 A B X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and2_2 A B X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and2_4 A B X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and2b_1 AN B X vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and2b_2 AN B X vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and2b_4 AN B X vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and3_1 A B C X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 y C vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and3_2 A B C X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 y C vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and3_4 A B C X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and3b_1 AN B C X vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 y C vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and3b_2 AN B C X vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 y C vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and3b_4 AN B C X vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and4_1 A B C D X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 y C vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 y D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and4_2 A B C D X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 y C vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 y D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and4_4 A B C D X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 y D vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and4b_1 AN B C D X vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 y C vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 y D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and4b_2 AN B C D X vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 y C vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 y D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and4b_4 AN B C D X vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 y D vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and4bb_1 AN BN C D X vgnd vnb vpb vpwr |
| *.PININFO AN:I BN:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 y C vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 y D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 B BN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 B BN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and4bb_2 AN BN C D X vgnd vnb vpb vpwr |
| *.PININFO AN:I BN:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 y C vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 y D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 B BN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 B BN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_and4bb_4 AN BN C D X vgnd vnb vpb vpwr |
| *.PININFO AN:I BN:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 y D vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 B BN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 B BN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_buf_12 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=12 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=12 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_buf_16 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=6 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=6 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_buf_1 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab A vgnd vnb nshort W=0.52 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X Ab vgnd vnb nshort W=0.52 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=0.79 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X Ab vpwr vpb phighvt W=0.79 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_buf_2 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_buf_4 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_buf_6 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=6 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=6 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_buf_8 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=3 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=3 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_bufbuf_16 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 Abb Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=3 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 Abbb Abb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=6 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN4 X Abbb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP4 X Abbb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 Abb Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=3 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 Abbb Abb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=6 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_bufbuf_8 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 Abb Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 Abbb Abb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=3 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN4 X Abbb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP4 X Abbb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 Abb Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 Abbb Abb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=3 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_bufinv_16 A Y vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIN1 Ab A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=3 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 Abb Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=6 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 Y Abb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=3 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 Abb Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=6 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 Y Abb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_bufinv_8 A Y vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIN1 Ab A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 Abb Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=3 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 Y Abb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 Abb Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=3 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 Y Abb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkbuf_16 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN0 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X Ab vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkbuf_1 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN0 Ab A vgnd vnb nshort W=0.52 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X Ab vgnd vnb nshort W=0.52 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Ab A vpwr vpb phighvt W=0.79 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X Ab vpwr vpb phighvt W=0.79 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkbuf_2 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN0 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X Ab vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkbuf_4 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN0 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X Ab vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkbuf_8 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN0 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X Ab vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkdlybuf4s15_1 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 A2 Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 Ab2 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 X Ab2 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 A2 Ab vpwr vpb phighvt W=0.82 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 Ab2 A2 vpwr vpb phighvt W=0.82 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 X Ab2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkdlybuf4s15_2 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 A2 Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 Ab2 A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 X Ab2 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 A2 Ab vpwr vpb phighvt W=0.82 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 Ab2 A2 vpwr vpb phighvt W=0.82 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 X Ab2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkdlybuf4s18_1 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 A2 Ab vgnd vnb nshort W=0.65 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 Ab2 A2 vgnd vnb nshort W=0.65 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 X Ab2 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 A2 Ab vpwr vpb phighvt W=0.82 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 Ab2 A2 vpwr vpb phighvt W=0.82 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 X Ab2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkdlybuf4s18_2 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 A2 Ab vgnd vnb nshort W=0.65 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 Ab2 A2 vgnd vnb nshort W=0.65 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 X Ab2 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 A2 Ab vpwr vpb phighvt W=0.82 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 Ab2 A2 vpwr vpb phighvt W=0.82 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 X Ab2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkdlybuf4s25_1 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 A2 Ab vgnd vnb nshort W=0.65 L=0.25 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 Ab2 A2 vgnd vnb nshort W=0.65 L=0.25 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 X Ab2 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 A2 Ab vpwr vpb phighvt W=0.82 L=0.25 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 Ab2 A2 vpwr vpb phighvt W=0.82 L=0.25 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 X Ab2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkdlybuf4s25_2 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 A2 Ab vgnd vnb nshort W=0.65 L=0.25 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 Ab2 A2 vgnd vnb nshort W=0.65 L=0.25 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 X Ab2 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 A2 Ab vpwr vpb phighvt W=0.82 L=0.25 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 Ab2 A2 vpwr vpb phighvt W=0.82 L=0.25 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 X Ab2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkdlybuf4s50_1 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 A2 Ab vgnd vnb nshort W=0.65 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 Ab2 A2 vgnd vnb nshort W=0.65 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 X Ab2 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 A2 Ab vpwr vpb phighvt W=0.82 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 Ab2 A2 vpwr vpb phighvt W=0.82 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 X Ab2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkdlybuf4s50_2 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 A2 Ab vgnd vnb nshort W=0.65 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 Ab2 A2 vgnd vnb nshort W=0.65 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 X Ab2 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 A2 Ab vpwr vpb phighvt W=0.82 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 Ab2 A2 vpwr vpb phighvt W=0.82 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 X Ab2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkinv_16 A Y vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIN0 Y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=24 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkinv_1 A Y vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIN0 Y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Y A vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkinv_2 A Y vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIN0 Y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=3 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkinv_4 A Y vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIN0 Y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=6 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkinv_8 A Y vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIN0 Y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=12 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkinvlp_2 A Y vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIP0 Y A vpwr vpb phighvt W=1.0 L=0.25 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 net36 A vgnd vnb nshort W=0.55 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 Y A net36 vnb nshort W=0.55 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_clkinvlp_4 A Y vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIP0 Y A vpwr vpb phighvt W=1.0 L=0.25 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 Y A net31 vnb nshort W=0.55 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 net35 A vgnd vnb nshort W=0.55 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net31 A vgnd vnb nshort W=0.55 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 Y A net35 vnb nshort W=0.55 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_conb_1 HI LO vgnd vnb vpb vpwr |
| *.PININFO vgnd:I vnb:I vpb:I vpwr:I HI:O LO:O |
| *cdl2spi.py: ERROR: Res missing required $[<model>] directive: |
| rI12 vgnd LO short |
| *cdl2spi.py: ERROR: Res missing required $[<model>] directive: |
| rI11 HI vpwr short |
| .ENDS |
| .SUBCKT scs8hd_decap_12 vgnd vnb vpb vpwr |
| *.PININFO vgnd:I vnb:I vpb:I vpwr:I |
| mI1 vgnd vpwr vgnd vnb nshort W=0.55 L=4.73 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 vpwr vgnd vpwr vpb phighvt W=0.87 L=4.73 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_decap_3 vgnd vnb vpb vpwr |
| *.PININFO vgnd:I vnb:I vpb:I vpwr:I |
| mI1 vgnd vpwr vgnd vnb nshort W=0.55 L=0.59 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 vpwr vgnd vpwr vpb phighvt W=0.87 L=0.59 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_decap_4 vgnd vnb vpb vpwr |
| *.PININFO vgnd:I vnb:I vpb:I vpwr:I |
| mI2 vpwr vgnd vpwr vpb phighvt W=0.87 L=1.05 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI1 vgnd vpwr vgnd vnb nshort W=0.55 L=1.05 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_decap_6 vgnd vnb vpb vpwr |
| *.PININFO vgnd:I vnb:I vpb:I vpwr:I |
| mI1 vgnd vpwr vgnd vnb nshort W=0.55 L=1.97 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 vpwr vgnd vpwr vpb phighvt W=0.87 L=1.97 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_decap_8 vgnd vnb vpb vpwr |
| *.PININFO vgnd:I vnb:I vpb:I vpwr:I |
| mI1 vgnd vpwr vgnd vnb nshort W=0.55 L=2.89 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 vpwr vgnd vpwr vpb phighvt W=0.87 L=2.89 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfbbn_1 CLKN D Q QN RESETB SETB vgnd vnb vpb vpwr |
| *.PININFO CLKN:I D:I RESETB:I SETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI46 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 RESET RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI676 M1 M0 net141 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI675 net141 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net162 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI677 M1 RESET net141 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M0 clkpos net125 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkpos CLKN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 net125 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 S0 clkneg net110 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net110 net82 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 QN net82 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 net162 net82 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI668 S0 clkpos net93 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI667 net93 M1 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI630 net82 RESET net81 vnb nshort W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI3 net82 S0 net81 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 net81 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI679 M1 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI669 S0 clkneg net218 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net162 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 net82 S0 net221 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI670 net218 M1 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI678 net165 RESET vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net210 net82 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 S0 clkpos net210 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI10 net82 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI11 net221 RESET vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 net194 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI665 db D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 M0 clkneg net194 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 RESET RESETB vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkpos CLKN vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI680 M1 M0 net165 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 net162 net82 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI661 QN net82 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfbbn_2 CLKN D Q QN RESETB SETB vgnd vnb vpb vpwr |
| *.PININFO CLKN:I D:I RESETB:I SETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI46 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 RESET RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI676 M1 M0 net141 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI675 net141 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net162 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI677 M1 RESET net141 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M0 clkpos net125 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkpos CLKN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 net125 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 S0 clkneg net110 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net110 net82 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 QN net82 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 net162 net82 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI668 S0 clkpos net93 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI667 net93 M1 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI630 net82 RESET net81 vnb nshort W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI3 net82 S0 net81 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 net81 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI679 M1 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI669 S0 clkneg net218 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net162 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 net82 S0 net221 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI670 net218 M1 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI678 net165 RESET vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net210 net82 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 S0 clkpos net210 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI10 net82 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI11 net221 RESET vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 net194 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI665 db D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 M0 clkneg net194 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 RESET RESETB vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkpos CLKN vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI680 M1 M0 net165 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 net162 net82 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI661 QN net82 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfbbp_1 CLK D Q QN RESETB SETB vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I RESETB:I SETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI46 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 RESET RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI676 M1 M0 net141 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI675 net141 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net162 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI677 M1 RESET net141 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M0 clkpos net118 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 net118 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 S0 clkneg net110 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net110 net82 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 QN net82 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 net162 net82 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI668 S0 clkpos net93 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI667 net93 M1 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI630 net82 RESET net81 vnb nshort W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI3 net82 S0 net81 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 net81 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI679 M1 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI669 S0 clkneg net218 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net162 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 net82 S0 net221 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI670 net218 M1 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI678 net165 RESET vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net210 net82 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 S0 clkpos net210 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI10 net82 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI11 net221 RESET vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 net194 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI665 db D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 M0 clkneg net194 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 RESET RESETB vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI680 M1 M0 net165 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 net162 net82 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI661 QN net82 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfrbp_1 CLK D Q QN RESETB vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I RESETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI46 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net99 s0 net125 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net125 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 net118 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 M0 clkpos net110 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 net110 M1 net118 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 s0 clkneg net98 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net99 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net98 net99 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI39 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 M1 clkpos s0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI53 net142 net99 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI50 QN net142 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net190 net99 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net99 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 s0 clkpos net190 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net99 s0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI30 net169 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 M0 clkneg net169 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 net169 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net99 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M1 M0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI40 db D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 M1 clkneg s0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI52 net142 net99 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI51 QN net142 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfrbp_2 CLK D Q QN RESETB vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I RESETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI46 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net99 s0 net125 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net125 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 net118 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 M0 clkpos net110 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 net110 M1 net118 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 s0 clkneg net98 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net99 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net98 net99 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI39 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 M1 clkpos s0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI53 net142 net99 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI50 QN net142 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net181 net99 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net99 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 s0 clkpos net181 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net99 s0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI30 net169 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 M0 clkneg net169 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 net169 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net99 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M1 M0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI40 db D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 M1 clkneg s0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI52 net142 net99 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI51 QN net142 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfrtn_1 CLKN D Q RESETB vgnd vnb vpb vpwr |
| *.PININFO CLKN:I D:I RESETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI46 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net83 net121 net109 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net109 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 net102 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 M0 clkpos net94 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 net94 M1 net102 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 net121 clkneg net82 vnb nshort W=0.36 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net83 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net82 net83 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkpos CLKN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI39 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 M1 clkpos net121 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net166 net83 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net83 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 net121 clkpos net166 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net83 net121 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI30 net145 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 M0 clkneg net145 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 net145 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net83 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkpos CLKN vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M1 M0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI40 db D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 M1 clkneg net121 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfrtp_1 CLK D Q RESETB vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I RESETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI46 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net82 s0 net108 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net108 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 net101 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 M0 clkpos net93 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 net93 M1 net101 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 s0 clkneg net81 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net82 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net81 net82 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI39 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 M1 clkpos s0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net165 net82 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net82 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 s0 clkpos net165 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net82 s0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI30 net144 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 M0 clkneg net144 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 net144 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net82 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M1 M0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI40 db D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 M1 clkneg s0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfrtp_2 CLK D Q RESETB vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I RESETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI46 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net82 s0 net108 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net108 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 net101 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 M0 clkpos net93 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 net93 M1 net101 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 s0 clkneg net81 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net82 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net81 net82 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI39 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 M1 clkpos s0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net156 net82 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net82 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 s0 clkpos net156 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net82 s0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI30 net144 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 M0 clkneg net144 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 net144 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net82 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M1 M0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI40 db D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 M1 clkneg s0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfrtp_4 CLK D Q RESETB vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I RESETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI46 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net82 s0 net108 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net108 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 net101 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 M0 clkpos net93 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 net93 M1 net101 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 s0 clkneg net81 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net82 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net81 net82 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI39 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 M1 clkpos s0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net165 net82 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net82 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 s0 clkpos net165 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net82 s0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI30 net144 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 M0 clkneg net144 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 net144 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net82 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M1 M0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI40 db D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 M1 clkneg s0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfsbp_1 CLK D Q QN SETB vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I SETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI36 net129 M0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI39 db D vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 M1 M0 net112 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net80 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 S0 clkpos net129 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 net97 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 S0 clkneg net89 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 net89 S1 net97 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 S1 S0 vgnd vnb nshort W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 M0 clkpos net80 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net112 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 net141 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net141 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI49 QN S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI40 db D vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 S0 clkneg net192 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 net192 M0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M1 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net169 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M0 clkneg net169 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net156 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 S0 clkpos net156 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 S0 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 S1 S0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 M1 M0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 net141 S0 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net141 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI50 QN S0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfsbp_2 CLK D Q QN SETB vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I SETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI36 net128 M0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI39 db D vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 M1 M0 net111 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net79 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 S0 clkpos net128 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 net96 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 S0 clkneg net88 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 net88 S1 net96 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 S1 S0 vgnd vnb nshort W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 M0 clkpos net79 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net111 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 net140 S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net140 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI49 QN S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI40 db D vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 S0 clkneg net191 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 net191 M0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M1 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net168 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M0 clkneg net168 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net155 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 S0 clkpos net155 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 S0 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 S1 S0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 M1 M0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 net140 S0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net140 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI50 QN S0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfstp_1 CLK D Q SETB vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I SETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI36 net120 M0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI39 db D vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 M1 M0 net103 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net71 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 S0 clkpos net120 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 net88 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 S0 clkneg net80 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 net80 S1 net88 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 S1 S0 vgnd vnb nshort W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 M0 clkpos net71 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net103 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 net128 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net128 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI40 db D vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 S0 clkneg net179 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 net179 M0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M1 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net156 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M0 clkneg net156 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net143 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 S0 clkpos net143 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 S0 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 S1 S0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 M1 M0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 net128 S0 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net128 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfstp_2 CLK D Q SETB vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I SETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI36 net120 M0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI39 db D vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 M1 M0 net103 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net71 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 S0 clkpos net120 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 net88 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 S0 clkneg net80 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 net80 S1 net88 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 S1 S0 vgnd vnb nshort W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 M0 clkpos net71 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net103 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 net128 S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net128 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI40 db D vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 S0 clkneg net179 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 net179 M0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M1 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net156 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M0 clkneg net156 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net143 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 S0 clkpos net143 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 S0 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 S1 S0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 M1 M0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 net128 S0 vpwr vpb phighvt W=1 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net128 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfstp_4 CLK D Q SETB vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I SETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI36 net120 M0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI39 db D vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 M1 M0 net103 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net71 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 S0 clkpos net120 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 net88 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 S0 clkneg net80 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 net80 S1 net88 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 S1 S0 vgnd vnb nshort W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 M0 clkpos net71 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net103 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 net128 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net128 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=5 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI40 db D vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 S0 clkneg net179 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 net179 M0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M1 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net156 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M0 clkneg net156 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net143 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 S0 clkpos net143 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 S0 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 S1 S0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 M1 M0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 net128 S0 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net128 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=5 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfxbp_1 CLK D Q QN vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI657 M0 clkpos net96 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net96 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 Q S1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI669 net88 S1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 S0 clkneg net72 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI641 net72 S1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M1 clkpos S0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 S1 S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI665 QN net88 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M0 clkneg net128 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 S1 S0 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 S0 clkpos net147 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 M1 M0 vpwr vpb phighvt W=0.75 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI670 net88 S1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 net147 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net128 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 Q S1 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 db D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 M1 clkneg S0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI666 QN net88 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfxbp_2 CLK D Q QN vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI657 M0 clkpos net96 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net96 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 Q S1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI669 net88 S1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 S0 clkneg net72 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI641 net72 S1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M1 clkpos S0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 S1 S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI665 QN net88 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M0 clkneg net128 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 S1 S0 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 S0 clkpos net147 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 M1 M0 vpwr vpb phighvt W=0.75 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI670 net88 S1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 net147 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net128 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 Q S1 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 db D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 M1 clkneg S0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI666 QN net88 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfxtp_1 CLK D Q vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI657 M0 clkpos net79 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net79 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 Q S1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 S0 clkneg net59 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI641 net59 S1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M1 clkpos S0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 S1 S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M0 clkneg net107 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 S1 S0 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 S0 clkpos net122 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 M1 M0 vpwr vpb phighvt W=0.75 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 net122 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net107 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 Q S1 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 db D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 M1 clkneg S0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfxtp_2 CLK D Q vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI657 M0 clkpos net79 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net79 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 Q S1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 S0 clkneg net59 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI641 net59 S1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M1 clkpos S0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 S1 S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M0 clkneg net107 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 S1 S0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 S0 clkpos net122 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 M1 M0 vpwr vpb phighvt W=0.75 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 net122 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net107 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 Q S1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 db D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 M1 clkneg S0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dfxtp_4 CLK D Q vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI657 M0 clkpos net79 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net79 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 Q S1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 S0 clkneg net59 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI641 net59 S1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M1 clkpos S0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 S1 S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M0 clkneg net107 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 S1 S0 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 S0 clkpos net122 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 M1 M0 vpwr vpb phighvt W=0.75 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 net122 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net107 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 Q S1 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 db D vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 M1 clkneg S0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlclkp_1 CLK GATE GCLK vgnd vnb vpb vpwr |
| *.PININFO CLK:I GATE:I vgnd:I vnb:I vpb:I vpwr:I GCLK:O |
| mI662 net75 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M0 clkpos net75 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net63 CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net63 m1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 M0 clkneg net54 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 net54 GATE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkpos CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 GCLK net63 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 m1 M0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 M0 clkneg net110 vnb nshort W=0.39 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net110 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 M0 clkpos net91 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net99 CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net63 m1 net99 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI36 net91 GATE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkpos CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 GCLK net63 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlclkp_2 CLK GATE GCLK vgnd vnb vpb vpwr |
| *.PININFO CLK:I GATE:I vgnd:I vnb:I vpb:I vpwr:I GCLK:O |
| mI662 net75 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M0 clkpos net75 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net63 CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net63 m1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 M0 clkneg net54 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 net54 GATE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkpos CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 GCLK net63 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 m1 M0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 M0 clkneg net110 vnb nshort W=0.39 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net110 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 M0 clkpos net91 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net99 CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net63 m1 net99 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI36 net91 GATE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkpos CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 GCLK net63 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlclkp_4 CLK GATE GCLK vgnd vnb vpb vpwr |
| *.PININFO CLK:I GATE:I vgnd:I vnb:I vpb:I vpwr:I GCLK:O |
| mI662 net75 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M0 clkpos net75 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net63 CLK vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net63 m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 M0 clkneg net54 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 net54 GATE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkpos CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 GCLK net63 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 m1 M0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 M0 clkneg net110 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net110 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 M0 clkpos net91 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net99 CLK vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net63 m1 net99 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI36 net91 GATE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkpos CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 GCLK net63 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlrbn_1 D GATEN Q QN RESETB vgnd vnb vpb vpwr |
| *.PININFO D:I GATEN:I RESETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI635 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 QN net125 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 M0 clkneg net61 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 net125 m1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 Q m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 clkpos GATEN vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 m1 RESETB vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net61 db vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 net57 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 M0 clkpos net57 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 db D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 clkpos GATEN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 QN net125 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 Q m1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 net125 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net108 RESETB vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M0 clkneg net116 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net116 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 m1 M0 net108 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 M0 clkpos net96 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net96 db vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlrbn_2 D GATEN Q QN RESETB vgnd vnb vpb vpwr |
| *.PININFO D:I GATEN:I RESETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI635 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 QN net125 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 M0 clkneg net61 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 net125 m1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 Q m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 clkpos GATEN vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 m1 RESETB vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net61 db vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 net57 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 M0 clkpos net57 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 db D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 clkpos GATEN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 QN net125 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 Q m1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 net125 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net108 RESETB vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M0 clkneg net116 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net116 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 m1 M0 net108 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 M0 clkpos net96 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net96 db vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlrbp_1 D GATE Q QN RESETB vgnd vnb vpb vpwr |
| *.PININFO D:I GATE:I RESETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI635 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 QN net125 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 M0 clkneg net61 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 net125 m1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 Q m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 clkneg GATE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 m1 RESETB vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net61 db vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 net57 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 M0 clkpos net57 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 db D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 clkneg GATE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 QN net125 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 Q m1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 net125 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net121 RESETB vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M0 clkneg net116 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net116 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 m1 M0 net121 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 M0 clkpos net96 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net96 db vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlrbp_2 D GATE Q QN RESETB vgnd vnb vpb vpwr |
| *.PININFO D:I GATE:I RESETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI635 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 QN net125 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 M0 clkneg net61 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 net125 m1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 Q m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 clkneg GATE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 m1 RESETB vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net61 db vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 net57 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 M0 clkpos net57 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 db D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 clkneg GATE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 QN net125 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 Q m1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 net125 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net108 RESETB vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M0 clkneg net116 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net116 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 m1 M0 net108 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 M0 clkpos net96 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net96 db vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlrtn_1 D GATEN Q RESETB vgnd vnb vpb vpwr |
| *.PININFO D:I GATEN:I RESETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI635 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 M0 clkneg net54 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 Q m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 clkpos GATEN vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 m1 RESETB vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net54 db vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 net50 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 M0 clkpos net50 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 db D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 clkpos GATEN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 Q m1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net93 RESETB vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M0 clkneg net101 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net101 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 m1 M0 net93 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 M0 clkpos net81 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net81 db vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlrtn_2 D GATEN Q RESETB vgnd vnb vpb vpwr |
| *.PININFO D:I GATEN:I RESETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI635 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 M0 clkneg net54 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 Q m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 clkpos GATEN vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 m1 RESETB vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net54 db vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 net50 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 M0 clkpos net50 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 db D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 clkpos GATEN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 Q m1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net93 RESETB vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M0 clkneg net101 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net101 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 m1 M0 net93 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 M0 clkpos net81 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net81 db vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlrtn_4 D GATEN Q RESETB vgnd vnb vpb vpwr |
| *.PININFO D:I GATEN:I RESETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI635 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 M0 clkneg net55 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 Q m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 clkpos GATEN vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 m1 RESETB vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net55 db vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 net51 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 M0 clkpos net51 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 db D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 clkpos GATEN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 Q m1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net94 RESETB vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M0 clkneg net102 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net102 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 m1 M0 net94 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 M0 clkpos net82 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net82 db vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlrtp_1 D GATE Q RESETB vgnd vnb vpb vpwr |
| *.PININFO D:I GATE:I RESETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI635 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 M0 clkneg net54 vpb phighvt W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 Q m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 clkneg GATE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 m1 RESETB vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net54 db vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 net50 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 M0 clkpos net50 vpb phighvt W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 db D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 clkneg GATE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 Q m1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net93 RESETB vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M0 clkneg net101 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net101 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 m1 M0 net93 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 M0 clkpos net81 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net81 db vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlrtp_2 D GATE Q RESETB vgnd vnb vpb vpwr |
| *.PININFO D:I GATE:I RESETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI635 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 M0 clkneg net54 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 Q m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 clkneg GATE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 m1 RESETB vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net54 db vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 net50 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 M0 clkpos net50 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 db D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 clkneg GATE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 Q m1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net93 RESETB vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M0 clkneg net101 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net101 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 m1 M0 net93 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 M0 clkpos net81 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net81 db vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlrtp_4 D GATE Q RESETB vgnd vnb vpb vpwr |
| *.PININFO D:I GATE:I RESETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI635 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 M0 clkneg net55 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 Q m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 clkneg GATE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 m1 RESETB vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net55 db vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 net51 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 M0 clkpos net51 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 db D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 clkneg GATE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 Q m1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net94 RESETB vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M0 clkneg net102 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net102 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 m1 M0 net94 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 M0 clkpos net82 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net82 db vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlxbn_1 D GATEN Q QN vgnd vnb vpb vpwr |
| *.PININFO D:I GATEN:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI635 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 QN net112 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 M0 clkneg net56 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 net112 m1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 Q m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 clkpos GATEN vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net56 db vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 net52 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 M0 clkpos net52 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 db D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 clkpos GATEN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 QN net112 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 Q m1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 net112 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M0 clkneg net107 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net107 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 m1 M0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 M0 clkpos net87 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net87 db vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlxbn_2 D GATEN Q QN vgnd vnb vpb vpwr |
| *.PININFO D:I GATEN:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI635 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 QN net114 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 M0 clkneg net58 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 net114 m1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 Q m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 clkpos GATEN vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net58 db vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 net54 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 M0 clkpos net54 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 db D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 clkpos GATEN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 QN net114 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 Q m1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 net114 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M0 clkneg net109 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net109 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 m1 M0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 M0 clkpos net89 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net89 db vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlxbp_1 D GATE Q QN vgnd vnb vpb vpwr |
| *.PININFO D:I GATE:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI635 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 QN net114 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 M0 clkneg net58 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 net114 m1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 Q m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 clkneg GATE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net58 db vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 net54 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 M0 clkpos net54 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 db D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 clkneg GATE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 QN net114 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 Q m1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 net114 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M0 clkneg net109 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net109 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 m1 M0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 M0 clkpos net89 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net89 db vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlxtn_1 D GATEN Q vgnd vnb vpb vpwr |
| *.PININFO D:I GATEN:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI635 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 M0 clkneg net53 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 Q m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 clkpos GATEN vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net53 db vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 net44 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 M0 clkpos net44 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 db D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 clkpos GATEN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 Q m1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M0 clkneg net96 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net96 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 m1 M0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 M0 clkpos net76 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net76 db vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlxtn_2 D GATEN Q vgnd vnb vpb vpwr |
| *.PININFO D:I GATEN:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI635 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 M0 clkneg net51 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 Q m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 clkpos GATEN vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net51 db vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 net47 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 M0 clkpos net47 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 db D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 clkpos GATEN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 Q m1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M0 clkneg net94 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net94 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 m1 M0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 M0 clkpos net74 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net74 db vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlxtn_4 D GATEN Q vgnd vnb vpb vpwr |
| *.PININFO D:I GATEN:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI635 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 M0 clkneg net51 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 Q m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 clkpos GATEN vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net51 db vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 net47 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 M0 clkpos net47 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 db D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 clkpos GATEN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 Q m1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M0 clkneg net94 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net94 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 m1 M0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 M0 clkpos net74 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net74 db vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlxtp_1 D GATE Q vgnd vnb vpb vpwr |
| *.PININFO D:I GATE:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI635 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 M0 clkneg net51 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 Q m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 clkneg GATE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net51 db vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 net47 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 M0 clkpos net47 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 db D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 clkneg GATE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 Q m1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M0 clkneg net94 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net94 m1 vgnd vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 m1 M0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 db D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 M0 clkpos net74 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net74 db vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlygate4sd1_1 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab net34 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net34 net30 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 net30 A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab net34 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 net34 net30 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI8 net30 A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlygate4sd2_1 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab net34 vgnd vnb nshort W=0.42 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net34 net30 vgnd vnb nshort W=0.42 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 net30 A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab net34 vpwr vpb phighvt W=0.42 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 net34 net30 vpwr vpb phighvt W=0.42 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI8 net30 A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlygate4sd3_1 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab net34 vgnd vnb nshort W=0.42 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net34 net30 vgnd vnb nshort W=0.42 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 net30 A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab net34 vpwr vpb phighvt W=0.42 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 net34 net30 vpwr vpb phighvt W=0.42 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI8 net30 A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlymetal6s2s_1 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab net55 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 net59 Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net55 net47 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI15 net51 A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 net47 X vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 X net51 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab net55 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 net59 Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 net55 net47 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI8 net47 X vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 X net51 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 net51 A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlymetal6s4s_1 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab X vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 net59 Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 X net47 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI15 net51 A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 net47 net43 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 net43 net51 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab X vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 net59 Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 X net47 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI8 net47 net43 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net43 net51 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 net51 A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_dlymetal6s6s_1 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN1 Ab net56 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net56 net48 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI15 net52 A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 net48 net44 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 net44 net52 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab net56 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 net56 net48 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI8 net48 net44 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net44 net52 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 net52 A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_ebufn_1 A TEB Z vgnd vnb vpb vpwr |
| *.PININFO A:I TEB:I vgnd:I vnb:I vpb:I vpwr:I Z:O |
| mMN0 Z net35 sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA net39 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 net39 TEB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net35 A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP0 vpwr TEB sndTEB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndTEB net35 Z vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 net39 TEB vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 net35 A vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_ebufn_2 A TEB Z vgnd vnb vpb vpwr |
| *.PININFO A:I TEB:I vgnd:I vnb:I vpb:I vpwr:I Z:O |
| mMN0 Z net35 sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA net39 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 net39 TEB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net35 A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP0 vpwr TEB sndTEB vpb phighvt W=0.94 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndTEB net35 Z vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 net39 TEB vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 net35 A vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_ebufn_4 A TEB Z vgnd vnb vpb vpwr |
| *.PININFO A:I TEB:I vgnd:I vnb:I vpb:I vpwr:I Z:O |
| mMN0 Z net35 sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA net39 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 net39 TEB vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net35 A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP0 vpwr TEB sndTEB vpb phighvt W=0.94 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndTEB net35 Z vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 net39 TEB vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 net35 A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_ebufn_8 A TEB Z vgnd vnb vpb vpwr |
| *.PININFO A:I TEB:I vgnd:I vnb:I vpb:I vpwr:I Z:O |
| mMN0 Z net35 sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA net39 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 net39 TEB vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net35 A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP0 vpwr TEB sndTEB vpb phighvt W=0.94 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndTEB net35 Z vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 net39 TEB vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 net35 A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_edfxbp_1 CLK D DE Q QN vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I DE:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI14 net124 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI13 S0 clkneg net124 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 net68 deneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 Q S0 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net109 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 net92 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 M1 M0 vpwr vpb phighvt W=0.75 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 S0 clkpos net92 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M0 clkneg net109 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI10 net85 DE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 S1 S0 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 db S1 net85 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 deneg DE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI8 db D net68 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI21 QN S1 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI641 net193 S1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 S0 clkneg net193 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net148 DE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 Q S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net168 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 M0 clkpos net168 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 S1 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 net161 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI15 S0 clkpos net161 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 deneg DE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 db D net148 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI11 db S1 net141 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI12 net141 deneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI22 QN S1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_edfxtp_1 CLK D DE Q vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I DE:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI14 net115 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI13 S0 clkneg net115 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 net59 deneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 Q S0 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net79 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 net83 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 M1 M0 vpwr vpb phighvt W=0.75 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 S0 clkpos net83 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M0 clkneg net79 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI10 net76 DE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 S1 S0 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 db S1 net76 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 deneg DE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI8 db D net59 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI641 net175 S1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 S0 clkneg net175 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net172 DE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 Q S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net160 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 M0 clkpos net160 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 S1 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 net148 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI15 S0 clkpos net148 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 deneg DE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 db D net172 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI11 db S1 net128 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI12 net128 deneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_einvn_0 A TEB Z vgnd vnb vpb vpwr |
| *.PININFO A:I TEB:I vgnd:I vnb:I vpb:I vpwr:I Z:O |
| mMN0 Z A sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA net25 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 net25 TEB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP0 vpwr TEB sndTEB vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndTEB A Z vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 net25 TEB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_einvn_1 A TEB Z vgnd vnb vpb vpwr |
| *.PININFO A:I TEB:I vgnd:I vnb:I vpb:I vpwr:I Z:O |
| mMN0 Z A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA net25 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 net25 TEB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP0 vpwr TEB sndTEB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndTEB A Z vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 net25 TEB vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_einvn_2 A TEB Z vgnd vnb vpb vpwr |
| *.PININFO A:I TEB:I vgnd:I vnb:I vpb:I vpwr:I Z:O |
| mMN0 Z A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA TE vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 TE TEB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP0 vpwr TEB sndTEB vpb phighvt W=0.94 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndTEB A Z vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 TE TEB vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_einvn_4 A TEB Z vgnd vnb vpb vpwr |
| *.PININFO A:I TEB:I vgnd:I vnb:I vpb:I vpwr:I Z:O |
| mMN0 Z A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA TE vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 TE TEB vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP0 vpwr TEB sndTEB vpb phighvt W=0.94 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndTEB A Z vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 TE TEB vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_einvn_8 A TEB Z vgnd vnb vpb vpwr |
| *.PININFO A:I TEB:I vgnd:I vnb:I vpb:I vpwr:I Z:O |
| mMN0 Z A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA TE vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 TE TEB vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP0 vpwr TEB sndTEB vpb phighvt W=0.94 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndTEB A Z vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 TE TEB vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_einvp_1 A TE Z vgnd vnb vpb vpwr |
| *.PININFO A:I TE:I vgnd:I vnb:I vpb:I vpwr:I Z:O |
| mMN0 Z A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA TE vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 TEB TE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP0 vpwr TEB sndTEB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndTEB A Z vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 TEB TE vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_einvp_2 A TE Z vgnd vnb vpb vpwr |
| *.PININFO A:I TE:I vgnd:I vnb:I vpb:I vpwr:I Z:O |
| mMN0 Z A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA TE vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 TEB TE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP0 vpwr TEB sndTEB vpb phighvt W=0.94 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndTEB A Z vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 TEB TE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_einvp_4 A TE Z vgnd vnb vpb vpwr |
| *.PININFO A:I TE:I vgnd:I vnb:I vpb:I vpwr:I Z:O |
| mMN0 Z A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA TE vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 TEB TE vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP0 vpwr TEB sndTEB vpb phighvt W=0.94 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndTEB A Z vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 TEB TE vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_einvp_8 A TE Z vgnd vnb vpb vpwr |
| *.PININFO A:I TE:I vgnd:I vnb:I vpb:I vpwr:I Z:O |
| mMN0 Z A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA TE vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 TEB TE vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP0 vpwr TEB sndTEB vpb phighvt W=0.94 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndTEB A Z vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 TEB TE vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_fa_1 A B CIN COUT SUM vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CIN:I vgnd:I vnb:I vpb:I vpwr:I COUT:O SUM:O |
| mMNs1s nint1 majb sumb vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 COUT majb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 SUM sumb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNmaj10 majb B sndNAp1 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNmaj11 sndNAp1 A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNmaj30 majb CIN sndNCINn3 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNmaj31 sndNCINn3 B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNmaj20 vgnd A sndNCINn3 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs2s0 vgnd A sndNAn4 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs2s1 sndNAn4 B sndNBn4 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs2s2 sndNBn4 CIN sumb vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs3s0 nint1 B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs3s1 nint1 A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs3s2 nint1 CIN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 COUT majb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 SUM sumb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPmaj10 vpwr A sndPAp1 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPmaj11 sndPAp1 B majb vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPmaj20 vpwr A sndPCINp3 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPmaj21 sndPCINp3 CIN majb vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPmaj31 sndPCINp3 B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs2s0 vpwr A sndPAp4 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs2s1 sndPAp4 B sndPBp4 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs2s2 sndPBp4 CIN sumb vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs3s0 pint1 B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs3s1 pint1 A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs3s2 pint1 CIN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs1s pint1 majb sumb vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_fa_2 A B CIN COUT SUM vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CIN:I vgnd:I vnb:I vpb:I vpwr:I COUT:O SUM:O |
| mMNs1s nint1 majb sumb vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 COUT majb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 SUM sumb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNmaj10 majb B sndNAp1 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNmaj11 sndNAp1 A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNmaj30 majb CIN nmajmid vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNmaj21 nmajmid A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNmaj20 vgnd B nmajmid vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs2s0 vgnd A sndNAn4 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs2s1 sndNAn4 B sndNBn4 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs2s2 sndNBn4 CIN sumb vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs3s0 nint1 A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs3s1 nint1 B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs3s2 nint1 CIN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 COUT majb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 SUM sumb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPmaj10 vpwr A sndPAp1 vpb phighvt W=0.63 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPmaj11 sndPAp1 B majb vpb phighvt W=0.63 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPmaj20 vpwr B pmajmid vpb phighvt W=0.63 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPmaj30 pmajmid CIN majb vpb phighvt W=0.63 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPmaj21 pmajmid A vpwr vpb phighvt W=0.63 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs2s0 vpwr A sndPAp4 vpb phighvt W=0.63 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs2s1 sndPAp4 B sndPBp4 vpb phighvt W=0.63 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs2s2 sndPBp4 CIN sumb vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs3s0 pint1 A vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs3s1 pint1 B vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs3s2 pint1 CIN vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs1s pint1 majb sumb vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_fa_4 A B CIN COUT SUM vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CIN:I vgnd:I vnb:I vpb:I vpwr:I COUT:O SUM:O |
| mMNs1s nint1 majb sumb vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 COUT majb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 SUM sumb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNmaj10 majb B sndNAp1 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNmaj11 sndNAp1 A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNmaj30 majb CIN nmajmid vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNmaj21 nmajmid A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNmaj20 vgnd B nmajmid vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs2s0 vgnd A sndNAn4 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs2s1 sndNAn4 B sndNBn4 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs2s2 sndNBn4 CIN sumb vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs3s0 nint1 A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs3s1 nint1 B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs3s2 nint1 CIN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 COUT majb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 SUM sumb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPmaj10 vpwr A sndPAp1 vpb phighvt W=0.63 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPmaj11 sndPAp1 B majb vpb phighvt W=0.63 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPmaj20 vpwr B pmajmid vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPmaj30 pmajmid CIN majb vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPmaj21 pmajmid A vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs2s0 vpwr A sndPAp4 vpb phighvt W=0.63 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs2s1 sndPAp4 B sndPBp4 vpb phighvt W=0.63 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs2s2 sndPBp4 CIN sumb vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs3s0 pint1 A vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs3s1 pint1 B vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs3s2 pint1 CIN vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs1s pint1 majb sumb vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_fah_1 A B CI COUT SUM vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CI:I vgnd:I vnb:I vpb:I vpwr:I COUT:O SUM:O |
| mMIN2 COUT net195 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 SUM net123 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 CIb mid2 net195 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 Bb mid1 net195 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 CIbb mid2 net123 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 CIb mid1 net123 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 Bb B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 CIbb CIb vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 CIb CI vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI8 Ab2 A vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 Abb2 Ab2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI14 Ab1 A vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 Abb2 B mid1 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI21 Ab1 Bb mid1 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 Abb2 Bb mid2 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 Ab1 B mid2 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 COUT net195 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 SUM net123 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 CIb mid1 net195 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI3 Bb mid2 net195 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI1 CIbb mid1 net123 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 CIb mid2 net123 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 Bb B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 CIbb CIb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 CIb CI vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI12 Ab2 A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI13 Abb2 Ab2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 Ab1 A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI22 Abb2 Bb mid1 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI23 Ab1 B mid1 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 Abb2 B mid2 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 Ab1 Bb mid2 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_fahcin_1 A B CIN COUT SUM vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CIN:I vgnd:I vnb:I vpb:I vpwr:I COUT:O SUM:O |
| mMIP3 SUM net144 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 Bbb Bb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 Ab Bb mid2 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 Abb B mid2 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI22 Abb Bb mid1 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI23 Ab B mid1 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 CINb1 CIN vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI13 CINbb2 CINb2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 Abb Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI12 CINb2 CIN vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 Bb B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 CINbb2 mid2 net144 vpb phighvt W=0.84 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI1 CINb2 mid1 net144 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI3 Bbb mid2 COUT vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 CINb1 mid1 COUT vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 SUM net144 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 CINb1 mid2 COUT vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 Ab B mid2 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 Abb Bb mid2 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI21 Ab Bb mid1 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 Abb B mid1 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI14 CINb1 CIN vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 CINbb2 CINb2 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI8 CINb2 CIN vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 Ab A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 Abb Ab vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 Bb B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 CINbb2 mid1 net144 vnb nshort W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 CINb2 mid2 net144 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 Bbb mid1 COUT vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 Bbb Bb vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_fahcon_1 A B CI COUTN SUM vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CI:I vgnd:I vnb:I vpb:I vpwr:I COUTN:O SUM:O |
| mMIP3 SUM net146 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 Bb2 B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 Ab Bb1 mid2 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 Abb B mid2 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI22 Abb Bb1 mid1 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI23 Ab B mid1 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 CIb1 CI vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI13 CIbb2 CIb2 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 Abb Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI12 CIb2 CI vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 Bb1 B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 CIb2 mid2 net146 vpb phighvt W=0.84 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI1 CIbb2 mid1 net146 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI3 Bb2 mid2 COUTN vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 CIb1 mid1 COUTN vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 SUM net146 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 CIb1 mid2 COUTN vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 Ab B mid2 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 Abb Bb1 mid2 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI21 Ab Bb1 mid1 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 Abb B mid1 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI14 CIb1 CI vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 CIbb2 CIb2 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI8 CIb2 CI vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 Ab A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 Abb Ab vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 Bb1 B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 CIb2 mid1 net146 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 CIbb2 mid2 net146 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 Bb2 mid1 COUTN vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 Bb2 B vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_ha_1 A B COUT SUM vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I COUT:O SUM:O |
| mMIN2 COUT majb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 SUM sumb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand0 vgnd A sndNA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand1 sndNA B majb vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs1 sumb majb nint1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs20 vgnd A nint1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs21 vgnd B nint1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 COUT majb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 SUM sumb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand0 majb A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand1 majb B vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs1 vpwr majb sumb vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs20 vpwr A sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs21 sndPA B sumb vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_ha_2 A B COUT SUM vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I COUT:O SUM:O |
| mMIN2 COUT majb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 SUM sumb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand0 vgnd A sndNA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand1 sndNA B majb vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs1 sumb majb nint1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs20 vgnd A nint1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs21 vgnd B nint1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 COUT majb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 SUM sumb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand0 majb A vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand1 majb B vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs1 vpwr majb sumb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs20 vpwr A sndPA vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs21 sndPA B sumb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_ha_4 A B COUT SUM vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I COUT:O SUM:O |
| mMIN2 COUT majb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 SUM sumb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand0 vgnd A sndNA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand1 sndNA B majb vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs1 sumb majb nint1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs20 vgnd A nint1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNs21 vgnd B nint1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 COUT majb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 SUM sumb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand0 majb A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand1 majb B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs1 vpwr majb sumb vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs20 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPs21 sndPA B sumb vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_inv_12 A Y vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIN1 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=12 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=12 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_inv_16 A Y vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIN1 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_inv_1 A Y vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIN1 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_inv_2 A Y vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIN1 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_inv_4 A Y vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIP1 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_inv_6 A Y vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIN1 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=6 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=6 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_inv_8 A Y vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIP1 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_bleeder_1 short vgnd vnb vpb vpwr |
| *.PININFO short:I vgnd:I vnb:I vpb:I vpwr:B |
| mI2 net29 short net25 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI3 net25 short net24 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI1 vpwr short net29 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 net24 short net16 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 net16 short vgnd vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_clkbufkapwr_16 A X kapwr vgnd vnb vpb vpwr |
| *.PININFO A:I kapwr:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN0 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X Ab vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Ab A kapwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X Ab kapwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_clkbufkapwr_1 A X kapwr vgnd vnb vpb vpwr |
| *.PININFO A:I kapwr:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN0 Ab A vgnd vnb nshort W=0.52 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X Ab vgnd vnb nshort W=0.52 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Ab A kapwr vpb phighvt W=0.79 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X Ab kapwr vpb phighvt W=0.79 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_clkbufkapwr_2 A X kapwr vgnd vnb vpb vpwr |
| *.PININFO A:I kapwr:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN0 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X Ab vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Ab A kapwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X Ab kapwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_clkbufkapwr_4 A X kapwr vgnd vnb vpb vpwr |
| *.PININFO A:I kapwr:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN0 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X Ab vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Ab A kapwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X Ab kapwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_clkbufkapwr_8 A X kapwr vgnd vnb vpb vpwr |
| *.PININFO A:I kapwr:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN0 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 X Ab vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Ab A kapwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 X Ab kapwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_clkinvkapwr_16 A Y kapwr vgnd vnb vpb vpwr |
| *.PININFO A:I kapwr:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIN0 Y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Y A kapwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=24 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_clkinvkapwr_1 A Y kapwr vgnd vnb vpb vpwr |
| *.PININFO A:I kapwr:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIN0 Y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Y A kapwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_clkinvkapwr_2 A Y kapwr vgnd vnb vpb vpwr |
| *.PININFO A:I kapwr:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIN0 Y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Y A kapwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=3 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_clkinvkapwr_4 A Y kapwr vgnd vnb vpb vpwr |
| *.PININFO A:I kapwr:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIN0 Y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Y A kapwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=6 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_clkinvkapwr_8 A Y kapwr vgnd vnb vpb vpwr |
| *.PININFO A:I kapwr:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMIN0 Y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Y A kapwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=12 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_decapkapwr_12 kapwr vgnd vnb vpb vpwr |
| *.PININFO kapwr:I vgnd:I vnb:I vpb:I vpwr:I |
| mI1 vgnd kapwr vgnd vnb nshort W=0.55 L=4.73 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 kapwr vgnd kapwr vpb phighvt W=0.87 L=4.73 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_decapkapwr_3 kapwr vgnd vnb vpb vpwr |
| *.PININFO kapwr:I vgnd:I vnb:I vpb:I vpwr:I |
| mI1 vgnd kapwr vgnd vnb nshort W=0.55 L=0.59 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 kapwr vgnd kapwr vpb phighvt W=0.87 L=0.59 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_decapkapwr_4 kapwr vgnd vnb vpb vpwr |
| *.PININFO kapwr:I vgnd:I vnb:I vpb:I vpwr:I |
| mI1 vgnd kapwr vgnd vnb nshort W=0.55 L=1.05 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 kapwr vgnd kapwr vpb phighvt W=0.87 L=1.05 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_decapkapwr_6 kapwr vgnd vnb vpb vpwr |
| *.PININFO kapwr:I vgnd:I vnb:I vpb:I vpwr:I |
| mI1 vgnd kapwr vgnd vnb nshort W=0.55 L=1.97 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 kapwr vgnd kapwr vpb phighvt W=0.87 L=1.97 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_decapkapwr_8 kapwr vgnd vnb vpb vpwr |
| *.PININFO kapwr:I vgnd:I vnb:I vpb:I vpwr:I |
| mI1 vgnd kapwr vgnd vnb nshort W=0.55 L=2.89 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 kapwr vgnd kapwr vpb phighvt W=0.87 L=2.89 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_inputiso0n_1 A X sleepb vgnd vnb vpb vpwr |
| *.PININFO A:I sleepb:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mI14 X net36 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 net36 A sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI13 sndA sleepb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 net36 sleepb vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 X net36 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 net36 A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_inputiso0p_1 A X sleep vgnd vnb vpb vpwr |
| *.PININFO A:I sleep:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mI8 net36 A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 net36 sleepb vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 X net36 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 sleepb sleep vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI10 net36 sleepb sndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI21 X net36 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 sleepb sleep vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI11 sndA A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_inputiso1n_1 A X sleepb vgnd vnb vpb vpwr |
| *.PININFO A:I sleepb:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mI23 vpwr A sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI8 vpwr net44 X vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 net56 sleepb vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 sndPA net56 net44 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 net56 sleepb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 net44 A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X net44 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 net44 net56 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_inputiso1p_1 A X sleep vgnd vnb vpb vpwr |
| *.PININFO A:I sleep:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr sleep sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 sndPA A net36 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI15 vpwr net36 X vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI10 net36 A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 net36 sleep vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI14 X net36 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_inputisolatch_1 D Q SLEEPB vgnd vnb vpb vpwr |
| *.PININFO D:I SLEEPB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI677 Q s0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 sleepneg sleeppos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI674 net39 s0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 s0 sleepneg net49 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 net49 D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 s0 sleeppos net38 vnb nshort W=0.36 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net38 net39 vgnd vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI670 sleeppos SLEEPB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 sleeppos SLEEPB vpwr vpb phighvt W=0.55 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 sleepneg sleeppos vpwr vpb phighvt W=0.55 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net86 net39 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 s0 sleepneg net86 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net39 s0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 Q s0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 s0 sleeppos net69 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 net69 D vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_isobufsrc_16 A SLEEP X vgnd vnb vpb vpwr |
| *.PININFO A:I SLEEP:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr Ab sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA SLEEP X vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 X SLEEP vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 X Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 Ab A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_isobufsrc_1 A SLEEP X vgnd vnb vpb vpwr |
| *.PININFO A:I SLEEP:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr SLEEP sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA Ab X vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 X SLEEP vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 X Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_isobufsrc_2 A SLEEP X vgnd vnb vpb vpwr |
| *.PININFO A:I SLEEP:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr SLEEP sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA Ab X vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 X SLEEP vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 X Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_isobufsrc_4 A SLEEP X vgnd vnb vpb vpwr |
| *.PININFO A:I SLEEP:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr SLEEP sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA Ab X vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 X SLEEP vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 X Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 Ab A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_isobufsrc_8 A SLEEP X vgnd vnb vpb vpwr |
| *.PININFO A:I SLEEP:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr Ab sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA SLEEP X vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 X SLEEP vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 X Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 Ab A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_isobufsrckapwr_16 A SLEEP X kapwr vgnd vnb vpb vpwr |
| *.PININFO A:I SLEEP:I kapwr:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr SLEEP sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA net58 net66 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 net58 A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 Ab net66 kapwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 X Ab kapwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 net66 SLEEP vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 net66 net58 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 net58 A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 Ab net66 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI8 X Ab vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=16 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_lpflow_lsbuf_lh_isowell_4 A X lowlvpwr vgnd vnb vpb vpwr |
| *.PININFO A:I lowlvpwr:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mI2 net72 cross1 vpwr vpb phighvt W=0.79 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI3 cross1 net72 vpwr vpb phighvt W=0.79 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 Ab A lowlvpwr lowlvpwr phighvt W=1.0 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 X net60 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI28 net60 cross1 vpwr vpb phighvt W=0.79 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI5 cross1 Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 net72 A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI23 Ab A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 X net60 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI29 net60 cross1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor2_2 A B Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand2_2 A B Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_macro_sparecell LO vgnd vnb vpb vpwr |
| *.PININFO vgnd:I vnb:I vpb:I vpwr:I LO:O |
| XI1 net59 LO vgnd vnb vpb vpwr scs8hd_conb_1 |
| XI6 nor2right invright vgnd vnb vpb vpwr scs8hd_inv_2 |
| XI7 nor2left invleft vgnd vnb vpb vpwr scs8hd_inv_2 |
| XI4 nd2right nd2right nor2right vgnd vnb vpb vpwr scs8hd_nor2_2 |
| XI5 nd2left nd2left nor2left vgnd vnb vpb vpwr scs8hd_nor2_2 |
| XI2 LO LO nd2right vgnd vnb vpb vpwr scs8hd_nand2_2 |
| XI3 LO LO nd2left vgnd vnb vpb vpwr scs8hd_nand2_2 |
| .ENDS |
| .SUBCKT scs8hd_maj3_1 A B C X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN10 y B sndNBa vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN11 sndNBa A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN20 y B sndNBc vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN21 sndNBc C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN30 y C sndNCa vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN31 sndNCa A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP10 vpwr A sndPAb vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP11 sndPAb B y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP20 vpwr C sndPCb vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP21 sndPCb B y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP30 vpwr A sndPAc vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP31 sndPAc C y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_maj3_2 A B C X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN10 y B sndNBa vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN11 sndNBa A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN20 y B sndNBc vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN21 sndNBc C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN30 y C sndNCa vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN31 sndNCa A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP10 vpwr A sndPAb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP11 sndPAb B y vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP20 vpwr C sndPCb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP21 sndPCb B y vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP30 vpwr A sndPAc vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP31 sndPAc C y vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_maj3_4 A B C X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN10 y B sndNBa vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN11 sndNBa A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN20 y B sndNBc vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN21 sndNBc C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN30 y C sndNCa vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN31 sndNCa A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP10 vpwr A sndPAb vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP11 sndPAb B y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP20 vpwr C sndPCb vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP21 sndPCb B y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP30 vpwr A sndPAc vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP31 sndPAc C y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_mux2_1 A0 A1 S X vgnd vnb vpb vpwr |
| *.PININFO A0:I A1:I S:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMNA00 xb A0 smdNA0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA01 smdNA0 Sb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA10 xb A1 sndNA1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA11 sndNA1 S vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 Sb S vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X xb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA00 vpwr S sndPS vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA01 sndPS A0 xb vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA10 vpwr Sb sndPSb vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA11 sndPSb A1 xb vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Sb S vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X xb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_mux2_2 A0 A1 S X vgnd vnb vpb vpwr |
| *.PININFO A0:I A1:I S:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMNA00 xb A0 smdNA0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA01 smdNA0 Sb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA10 xb A1 sndNA1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA11 sndNA1 S vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 Sb S vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X xb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA00 vpwr S sndPS vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA01 sndPS A0 xb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA10 vpwr Sb sndPSb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA11 sndPSb A1 xb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Sb S vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X xb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_mux2_4 A0 A1 S X vgnd vnb vpb vpwr |
| *.PININFO A0:I A1:I S:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMNA00 xb A0 smdNA0 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA01 smdNA0 Sb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA10 xb A1 sndNA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA11 sndNA1 S vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 Sb S vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X xb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA00 vpwr S sndPS vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA01 sndPS A0 xb vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA10 vpwr Sb sndPSb vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA11 sndPSb A1 xb vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Sb S vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X xb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_mux2_8 A0 A1 S X vgnd vnb vpb vpwr |
| *.PININFO A0:I A1:I S:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMNA00 xb A0 smdNA0 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA01 smdNA0 Sb vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA10 xb A1 sndNA1 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA11 sndNA1 S vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 Sb S vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X xb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA00 vpwr S sndPS vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA01 sndPS A0 xb vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA10 vpwr Sb sndPSb vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA11 sndPSb A1 xb vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Sb S vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X xb vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_mux2i_1 A0 A1 S Y vgnd vnb vpb vpwr |
| *.PININFO A0:I A1:I S:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMNA00 Y A0 smdNA0 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA01 smdNA0 Sb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA10 Y A1 sndNA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA11 sndNA1 S vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 Sb S vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA00 vpwr S sndPS vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA01 sndPS A0 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA10 vpwr Sb sndPSb vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA11 sndPSb A1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Sb S vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_mux2i_2 A0 A1 S Y vgnd vnb vpb vpwr |
| *.PININFO A0:I A1:I S:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMNA00 Y A0 smdNA0 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA01 smdNA0 Sb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA10 Y A1 sndNA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA11 sndNA1 S vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 Sb S vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA00 vpwr S sndPS vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA01 sndPS A0 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA10 vpwr Sb sndPSb vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA11 sndPSb A1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Sb S vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_mux2i_4 A0 A1 S Y vgnd vnb vpb vpwr |
| *.PININFO A0:I A1:I S:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMNA00 Y A0 smdNA0 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA01 smdNA0 Sb vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA10 Y A1 sndNA1 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA11 sndNA1 S vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 Sb S vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA00 vpwr S sndPS vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA01 sndPS A0 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA10 vpwr Sb sndPSb vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA11 sndPSb A1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 Sb S vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_mux4_1 A0 A1 A2 A3 S0 S1 X vgnd vnb vpb vpwr |
| *.PININFO A0:I A1:I A2:I A3:I S0:I S1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMNA00 sndNS0ba0 S0b xlowb vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA01 vgnd A0 sndNS0ba0 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA10 sndNS0a1 S0 xlowb vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA11 vgnd A1 sndNS0a1 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA20 sndNS0ba2 S0b xhib vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA21 vgnd A2 sndNS0ba2 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA30 sndNS0a3 S0 xhib vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA31 vgnd A3 sndNS0a3 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNs1o xb S1b xlowb vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNs2o xb S1 xhib vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIN1 vgnd S1 S1b vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIN2 vgnd S0 S0b vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIN4 vgnd xb X vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA00 sndPA0a0 A0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA01 xlowb S0 sndPA0a0 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA10 sndPA1a1 A1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA11 xlowb S0b sndPA1a1 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA20 sndPA2a2 A2 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA21 xhib S0 sndPA2a2 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA30 sndPA3a3 A3 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA31 xhib S0b sndPA3a3 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPs1o xb S1 xlowb vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPs2o xb S1b xhib vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIP1 vpwr S1 S1b vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIP2 vpwr S0 S0b vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIP4 vpwr xb X vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| .ENDS |
| .SUBCKT scs8hd_mux4_2 A0 A1 A2 A3 S0 S1 X vgnd vnb vpb vpwr |
| *.PININFO A0:I A1:I A2:I A3:I S0:I S1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMNA00 sndNS0ba0 S0b xlowb vnb nshort W=0.36 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA01 vgnd A0 sndNS0ba0 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA10 sndNS0a1 S0 xlowb vnb nshort W=0.36 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA11 vgnd A1 sndNS0a1 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA20 sndNS0ba2 S0b xhib vnb nshort W=0.36 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA21 vgnd A2 sndNS0ba2 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA30 sndNS0a3 S0 xhib vnb nshort W=0.36 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA31 vgnd A3 sndNS0a3 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNs1o xb S1b xlowb vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNs2o xb S1 xhib vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIN1 vgnd S1 S1b vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIN2 vgnd S0 S0b vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIN4 vgnd xb X vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA00 sndPA0a0 A0 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA01 xlowb S0 sndPA0a0 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA10 sndPA1a1 A1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA11 xlowb S0b sndPA1a1 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA20 sndPA2a2 A2 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA21 xhib S0 sndPA2a2 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA30 sndPA3a3 A3 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA31 xhib S0b sndPA3a3 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPs1o xb S1 xlowb vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPs2o xb S1b xhib vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIP1 vpwr S1 S1b vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIP2 vpwr S0 S0b vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIP4 vpwr xb X vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| .ENDS |
| .SUBCKT scs8hd_mux4_4 A0 A1 A2 A3 S0 S1 X vgnd vnb vpb vpwr |
| *.PININFO A0:I A1:I A2:I A3:I S0:I S1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMNA00 sndNS0ba0 S0b xlowb vnb nshort W=0.36 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA01 vgnd A0 sndNS0ba0 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA10 sndNS0a1 S0 xlowb vnb nshort W=0.36 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA11 vgnd A1 sndNS0a1 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA20 sndNS0ba2 S0b xhib vnb nshort W=0.36 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA21 vgnd A2 sndNS0ba2 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA30 sndNS0a3 S0 xhib vnb nshort W=0.36 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNA31 vgnd A3 sndNS0a3 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNs1o xb S1b xlowb vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMNs2o xb S1 xhib vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIN1 vgnd S1 S1b vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIN2 vgnd S0 S0b vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIN4 vgnd xb X vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA00 sndPA0a0 A0 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA01 xlowb S0 sndPA0a0 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA10 sndPA1a1 A1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA11 xlowb S0b sndPA1a1 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA20 sndPA2a2 A2 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA21 xhib S0 sndPA2a2 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA30 sndPA3a3 A3 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPA31 xhib S0b sndPA3a3 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPs1o xb S1 xlowb vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMPs2o xb S1b xhib vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIP1 vpwr S1 S1b vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIP2 vpwr S0 S0b vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMIP4 vpwr xb X vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| .ENDS |
| .SUBCKT scs8hd_nand2_1 A B Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand2_4 A B Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand2_8 A B Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand2b_1 AN B Y vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand2b_2 AN B Y vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand2b_4 AN B Y vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand3_1 A B C Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 Y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand3_2 A B C Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 Y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand3_4 A B C Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 Y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand3b_1 AN B C Y vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 Y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand3b_2 AN B C Y vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 Y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand3b_4 AN B C Y vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 Y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand4_1 A B C D Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 Y D vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 Y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand4_2 A B C D Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 Y D vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 Y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand4_4 A B C D Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 Y D vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 Y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand4b_1 AN B C D Y vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 Y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 Y D vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand4b_2 AN B C D Y vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 Y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 Y D vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand4b_4 AN B C D Y vgnd vnb vpb vpwr |
| *.PININFO AN:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 Y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 Y D vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand4bb_1 AN BN C D Y vgnd vnb vpb vpwr |
| *.PININFO AN:I BN:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 Y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 Y D vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 B BN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 B BN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand4bb_2 AN BN C D Y vgnd vnb vpb vpwr |
| *.PININFO AN:I BN:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 Y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 Y D vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 B BN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 B BN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nand4bb_4 AN BN C D Y vgnd vnb vpb vpwr |
| *.PININFO AN:I BN:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 Y A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 Y B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 Y C vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 Y D vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP0 A AN vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 B BN vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A sndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 sndA B sndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 sndB C sndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 sndC D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN0 A AN vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 B BN vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor2_1 A B Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor2_4 A B Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor2_8 A B Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor2b_1 A BN Y vgnd vnb vpb vpwr |
| *.PININFO A:I BN:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 B BN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 B BN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor2b_2 A BN Y vgnd vnb vpb vpwr |
| *.PININFO A:I BN:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 B BN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 B BN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor2b_4 A BN Y vgnd vnb vpb vpwr |
| *.PININFO A:I BN:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 B BN vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 B BN vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor3_1 A B C Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 Y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor3_2 A B C Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 Y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor3_4 A B C Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 Y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor3b_1 A B CN Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CN:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 C CN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 Y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 C CN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor3b_2 A B CN Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CN:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 C CN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 Y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 C CN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor3b_4 A B CN Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CN:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 C CN vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 Y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 C CN vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor4_1 A B C D Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMP2 sndPB C sndPC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMP3 sndPC D Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMN2 Y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMN3 Y D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| .ENDS |
| .SUBCKT scs8hd_nor4_2 A B C D Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMP2 sndPB C sndPC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMP3 sndPC D Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMN2 Y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMN3 Y D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| .ENDS |
| .SUBCKT scs8hd_nor4_4 A B C D Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMP2 sndPB C sndPC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMP3 sndPC D Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMN2 Y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| mMN3 Y D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.028 perim=0.76 |
| .ENDS |
| .SUBCKT scs8hd_nor4b_1 A B C DN Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I DN:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C sndPC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 sndPC D Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 D DN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 Y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 Y D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 D DN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor4b_2 A B C DN Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I DN:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C sndPC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 sndPC D Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 D DN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 Y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 Y D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 D DN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor4b_4 A B C DN Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I DN:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C sndPC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 sndPC D Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 D DN vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 Y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 Y D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 D DN vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor4bb_1 A B CN DN Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CN:I DN:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C sndPC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 sndPC D Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 C CN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 D DN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 Y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 Y D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 C CN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 D DN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor4bb_2 A B CN DN Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CN:I DN:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C sndPC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 sndPC D Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 C CN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 D DN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 Y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 Y D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 C CN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 D DN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_nor4bb_4 A B CN DN Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CN:I DN:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C sndPC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 sndPC D Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 C CN vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 D DN vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 Y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 Y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 Y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 Y D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 C CN vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 D DN vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o2111a_1 A1 A2 B1 C1 D1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I D1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPD0 vpwr D1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 pndC C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMND0 y D1 pndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o2111a_2 A1 A2 B1 C1 D1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I D1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPD0 vpwr D1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 pndC C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMND0 y D1 pndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o2111a_4 A1 A2 B1 C1 D1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I D1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPD0 vpwr D1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 pndC C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMND0 y D1 pndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o2111ai_1 A1 A2 B1 C1 D1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I D1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPD0 vpwr D1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 pndC C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMND0 Y D1 pndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o2111ai_2 A1 A2 B1 C1 D1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I D1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPD0 vpwr D1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 pndC C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMND0 Y D1 pndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o2111ai_4 A1 A2 B1 C1 D1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I D1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPD0 vpwr D1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 pndC C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMND0 Y D1 pndC vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o211a_1 A1 A2 B1 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o211a_2 A1 A2 B1 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o211a_4 A1 A2 B1 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o211ai_1 A1 A2 B1 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o211ai_2 A1 A2 B1 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o211ai_4 A1 A2 B1 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o21a_1 A1 A2 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o21a_2 A1 A2 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o21a_4 A1 A2 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o21ai_0 A1 A2 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o21ai_1 A1 A2 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=0.7 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o21ai_2 A1 A2 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o21ai_4 A1 A2 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o21ba_1 A1 A2 B1N X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1N:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPB1N B1 B1N vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINB1N B1 B1N vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o21ba_2 A1 A2 B1N X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1N:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPB1N B1 B1N vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINB1N B1 B1N vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o21ba_4 A1 A2 B1N X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1N:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPB1N B1 B1N vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINB1N B1 B1N vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o21bai_1 A1 A2 B1N Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1N:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPB1N B1 B1N vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINB1N B1 B1N vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o21bai_2 A1 A2 B1N Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1N:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPB1N B1 B1N vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINB1N B1 B1N vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o21bai_4 A1 A2 B1N Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1N:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPB1N B1 B1N vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINB1N B1 B1N vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o221a_1 A1 A2 B1 B2 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 pndB B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o221a_2 A1 A2 B1 B2 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 pndB B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o221a_4 A1 A2 B1 B2 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 pndB B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o221ai_1 A1 A2 B1 B2 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 pndB B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o221ai_2 A1 A2 B1 B2 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 pndB B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o221ai_4 A1 A2 B1 B2 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 pndB B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o22a_1 A1 A2 B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 y B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o22a_2 A1 A2 B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 y B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o22a_4 A1 A2 B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 y B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o22ai_1 A1 A2 B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 Y B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o22ai_2 A1 A2 B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 Y B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o22ai_4 A1 A2 B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 Y B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o2bb2a_1 A1N A2N B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1N:I A2N:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand0 vgnd A1N sndNA1N vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand1 sndNA1N A2N inand vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 nmid B1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 nmid B2 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 y inand nmid vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand0 inand A1N vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand1 inand A2N vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 vpwr B1 sndPB1 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 sndPB1 B2 y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 y inand vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o2bb2a_2 A1N A2N B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1N:I A2N:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand0 vgnd A1N sndNA1N vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand1 sndNA1N A2N inand vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 nmid B1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 nmid B2 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 y inand nmid vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand0 inand A1N vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand1 inand A2N vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 vpwr B1 sndPB1 vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 sndPB1 B2 y vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 y inand vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o2bb2a_4 A1N A2N B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1N:I A2N:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand0 vgnd A1N sndNA1N vnb nshort W=0.65 L=0.15 SA=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand1 sndNA1N A2N inand vnb nshort W=0.65 L=0.15 SA=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 nmid B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 nmid B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 y inand nmid vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand0 inand A1N vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand1 inand A2N vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 vpwr B1 sndPB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 sndPB1 B2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 y inand vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o2bb2ai_1 A1N A2N B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1N:I A2N:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMNnand0 vgnd A1N sndNA1N vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand1 sndNA1N A2N inand vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 nmid B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 nmid B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 Y inand nmid vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand0 inand A1N vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand1 inand A2N vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 vpwr B1 sndPB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 sndPB1 B2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 Y inand vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o2bb2ai_2 A1N A2N B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1N:I A2N:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMNnand0 vgnd A1N sndNA1N vnb nshort W=0.65 L=0.15 SA=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand1 sndNA1N A2N inand vnb nshort W=0.65 L=0.15 SA=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 nmid B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 nmid B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 Y inand nmid vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand0 inand A1N vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand1 inand A2N vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 vpwr B1 sndPB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 sndPB1 B2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 Y inand vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o2bb2ai_4 A1N A2N B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1N:I A2N:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMNnand0 vgnd A1N sndNA1N vnb nshort W=0.65 L=0.15 SA=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand1 sndNA1N A2N inand vnb nshort W=0.65 L=0.15 SA=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 nmid B1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 nmid B2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 Y inand nmid vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand0 inand A1N vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand1 inand A2N vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 vpwr B1 sndPB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 sndPB1 B2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 Y inand vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o311a_1 A1 A2 A3 B1 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o311a_2 A1 A2 A3 B1 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o311a_4 A1 A2 A3 B1 C1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o311ai_0 A1 A2 A3 B1 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 Y vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 Y vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 pndB vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o311ai_1 A1 A2 A3 B1 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o311ai_2 A1 A2 A3 B1 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o311ai_4 A1 A2 A3 B1 C1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I C1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPC0 vpwr C1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 pndB B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNC0 Y C1 pndB vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o31a_1 A1 A2 A3 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o31a_2 A1 A2 A3 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o31a_4 A1 A2 A3 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o31ai_1 A1 A2 A3 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o31ai_2 A1 A2 A3 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o31ai_4 A1 A2 A3 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o32a_1 A1 A2 A3 B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 y B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o32a_2 A1 A2 A3 B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 y B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o32a_4 A1 A2 A3 B1 B2 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 y B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o32ai_1 A1 A2 A3 B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 Y B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o32ai_2 A1 A2 A3 B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 Y B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o32ai_4 A1 A2 A3 B1 B2 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I B1:I B2:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 sndB1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB1 sndB1 B2 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB1 Y B2 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o41a_1 A1 A2 A3 A4 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I A4:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 sndA3 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA3 sndA3 A4 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA3 pndA A4 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o41a_2 A1 A2 A3 A4 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I A4:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 sndA3 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA3 sndA3 A4 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA3 pndA A4 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o41a_4 A1 A2 A3 A4 B1 X vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I A4:I B1:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 sndA3 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA3 sndA3 A4 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIPX X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA3 pndA A4 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMINX X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o41ai_1 A1 A2 A3 A4 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I A4:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 sndA3 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA3 sndA3 A4 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA3 pndA A4 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o41ai_2 A1 A2 A3 A4 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I A4:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 sndA3 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA3 sndA3 A4 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA3 pndA A4 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_o41ai_4 A1 A2 A3 A4 B1 Y vgnd vnb vpb vpwr |
| *.PININFO A1:I A2:I A3:I A4:I B1:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMPA0 vpwr A1 sndA1 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA1 sndA1 A2 sndA2 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA2 sndA2 A3 sndA3 vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPA3 sndA3 A4 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPB0 vpwr B1 Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA0 pndA A1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA1 pndA A2 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA2 pndA A3 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNA3 pndA A4 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNB0 Y B1 pndA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or2_0 A B X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X y vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or2_1 A B X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or2_2 A B X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or2_4 A B X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or2b_1 A BN X vgnd vnb vpb vpwr |
| *.PININFO A:I BN:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 B BN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 B BN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or2b_2 A BN X vgnd vnb vpb vpwr |
| *.PININFO A:I BN:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 B BN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 B BN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or2b_4 A BN X vgnd vnb vpb vpwr |
| *.PININFO A:I BN:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP1 B BN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 B BN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or3_1 A B C X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 y C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or3_2 A B C X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 y C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or3_4 A B C X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or3b_1 A B CN X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CN:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 C CN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 y C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 C CN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or3b_2 A B CN X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CN:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 C CN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 y C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 C CN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or3b_4 A B CN X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CN:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 C CN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 C CN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or4_1 A B C D X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C sndPC vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 sndPC D y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP4 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 y C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 y D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN4 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or4_2 A B C D X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C sndPC vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 sndPC D y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP4 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 y C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 y D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN4 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or4_4 A B C D X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I D:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C sndPC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 sndPC D y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP4 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 y D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN4 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or4b_1 A B C DN X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I DN:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C sndPC vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 sndPC D y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 D DN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP4 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 y C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 y D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 D DN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN4 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or4b_2 A B C DN X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I DN:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C sndPC vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 sndPC D y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 D DN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP4 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 y C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 y D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 D DN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN4 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or4b_4 A B C DN X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I DN:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C sndPC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 sndPC D y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 D DN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP4 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 y D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 D DN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN4 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or4bb_1 A B CN DN X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CN:I DN:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C sndPC vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 sndPC D y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 C CN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 D DN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP4 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 y C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 y D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 C CN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 D DN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN4 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or4bb_2 A B CN DN X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CN:I DN:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C sndPC vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 sndPC D y vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 C CN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 D DN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP4 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 y C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 y D vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 C CN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 D DN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN4 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_or4bb_4 A B CN DN X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I CN:I DN:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMP0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP1 sndPA B sndPB vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP2 sndPB C sndPC vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMP3 sndPC D y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 C CN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 D DN vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP4 X y vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN0 y A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN1 y B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN2 y C vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMN3 y D vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 C CN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 D DN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN4 X y vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_probec_s8p_8 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIP1 Ab A vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=3 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 net33 Ab vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 Ab A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=3 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 net33 Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| *cdl2spi.py: ERROR: Res missing required $[<model>] directive: |
| rI112 net33 X short |
| *cdl2spi.py: ERROR: Res missing required $[<model>] directive: |
| rI120 vgnd met5vgnd short |
| *cdl2spi.py: ERROR: Res missing required $[<model>] directive: |
| rI119 vpwr met5vpwr short |
| .ENDS |
| .SUBCKT scs8hd_probe_s8p_8 A X vgnd vnb vpb vpwr |
| *.PININFO A:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIP1 Ab A vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=3 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP2 net29 Ab vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN1 Ab A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=3 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN2 net29 Ab vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=8 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| *cdl2spi.py: ERROR: Res missing required $[<model>] directive: |
| rI112 net29 X short |
| .ENDS |
| .SUBCKT scs8hd_sdfbbn_1 CLKN D Q QN RESETB SCD SCE SETB vgnd vnb vpb vpwr |
| *.PININFO CLKN:I D:I RESETB:I SCD:I SCE:I SETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| *.PININFO QN:O |
| mI98 net105 D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 net105 SCE n1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI46 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 RESET RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI676 M1 M0 net176 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI675 net176 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net213 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI677 M1 RESET net176 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M0 clkpos net153 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkpos CLKN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 net153 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 S0 clkneg net145 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net145 net117 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 QN net117 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 net213 net117 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 net105 clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI668 S0 clkpos net125 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI667 net125 M1 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI630 net117 RESET net116 vnb nshort W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI3 net117 S0 net116 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 net116 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 net105 D p0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 net105 sceb p1 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI679 M1 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI669 S0 clkneg net265 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net213 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 net117 S0 net268 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI670 net265 M1 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI678 net216 RESET vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net257 net117 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 S0 clkpos net257 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI10 net117 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI11 net268 RESET vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 net241 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 net105 clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 M0 clkneg net241 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 RESET RESETB vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkpos CLKN vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI680 M1 M0 net216 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 net213 net117 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI661 QN net117 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI640 sceb SCE vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdfbbn_2 CLKN D Q QN RESETB SCD SCE SETB vgnd vnb vpb vpwr |
| *.PININFO CLKN:I D:I RESETB:I SCD:I SCE:I SETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| *.PININFO QN:O |
| mI98 net105 D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 net105 SCE n1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI46 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 RESET RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI676 M1 M0 net176 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI675 net176 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net213 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI677 M1 RESET net176 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M0 clkpos net160 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkpos CLKN vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 net160 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 S0 clkneg net145 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net145 net117 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 QN net117 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 net213 net117 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 net105 clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI668 S0 clkpos net128 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI667 net128 M1 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI630 net117 RESET net116 vnb nshort W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI3 net117 S0 net116 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 net116 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 net105 D p0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 net105 sceb p1 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI679 M1 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI669 S0 clkneg net265 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net213 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 net117 S0 net268 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI670 net265 M1 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI678 net216 RESET vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net257 net117 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 S0 clkpos net257 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI10 net117 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI11 net268 RESET vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 net241 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 net105 clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 M0 clkneg net241 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 RESET RESETB vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkpos CLKN vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI680 M1 M0 net216 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 net213 net117 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI661 QN net117 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI640 sceb SCE vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdfbbp_1 CLK D Q QN RESETB SCD SCE SETB vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I RESETB:I SCD:I SCE:I SETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| *.PININFO QN:O |
| mI98 net105 D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 net105 SCE n1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI46 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 RESET RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI676 M1 M0 net176 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI675 net176 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net213 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI677 M1 RESET net176 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M0 clkpos net160 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 net160 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 S0 clkneg net145 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net145 net117 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 QN net117 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 net213 net117 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 net105 clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI668 S0 clkpos net125 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI667 net125 M1 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI630 net117 RESET net116 vnb nshort W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI3 net117 S0 net116 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 net116 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 net105 D p0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 net105 sceb p1 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI679 M1 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI669 S0 clkneg net265 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net213 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI9 net117 S0 net268 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI670 net265 M1 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI678 net216 RESET vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net257 net117 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 S0 clkpos net257 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI10 net117 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI11 net268 RESET vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 net241 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 net105 clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 M0 clkneg net241 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 RESET RESETB vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI680 M1 M0 net216 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 net213 net117 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI661 QN net117 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI640 sceb SCE vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdfrbp_1 CLK D Q QN RESETB SCD SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I RESETB:I SCD:I SCE:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI642 clkneg CLK vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net92 S0 net134 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net134 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 net127 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 M0 clkpos net115 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 net115 M1 net127 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 S0 clkneg net103 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 Q net92 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net103 net92 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 M1 clkpos S0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI672 net171 net92 vgnd vnb nshort W=0.52 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI670 QN net171 vgnd vnb nshort W=0.52 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI98 db D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 SD=280e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 db SCE n1 vnb nshort W=0.42 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI643 clkneg CLK vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkpos clkneg vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net215 net92 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net92 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 S0 clkpos net215 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net92 S0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI30 net194 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 M0 clkneg net194 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 net194 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 Q net92 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M1 M0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 M1 clkneg S0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 sceb SCE vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI673 net171 net92 vpwr vpb phighvt W=0.79 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI671 QN net171 vpwr vpb phighvt W=0.79 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 db sceb p1 vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 db D p0 vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdfrbp_2 CLK D Q QN RESETB SCD SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I RESETB:I SCD:I SCE:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI642 clkneg CLK vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net92 S0 net134 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net134 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 net127 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 M0 clkpos net115 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 net115 M1 net127 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 S0 clkneg net110 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 Q net92 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net110 net92 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 M1 clkpos S0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI672 net171 net92 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI670 QN net171 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI98 db D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 SD=280e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 db SCE n1 vnb nshort W=0.42 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI643 clkneg CLK vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkpos clkneg vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net215 net92 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net92 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 S0 clkpos net215 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net92 S0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI30 net194 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 M0 clkneg net194 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 net194 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 Q net92 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M1 M0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 M1 clkneg S0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 sceb SCE vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI673 net171 net92 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI671 QN net171 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 db sceb p1 vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 db D p0 vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdfrtn_1 CLKN D Q RESETB SCD SCE vgnd vnb vpb vpwr |
| *.PININFO CLKN:I D:I RESETB:I SCD:I SCE:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI642 clkpos CLKN vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkneg clkpos vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net87 net153 net117 vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net117 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 net110 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 M0 clkpos net98 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 net98 M1 net110 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 net153 clkneg net93 vnb nshort W=0.36 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net87 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net93 net87 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 M1 clkpos net153 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI98 db D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 SD=280e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 db SCE n1 vnb nshort W=0.42 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI643 clkpos CLKN vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg clkpos vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net190 net87 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net87 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 net153 clkpos net190 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net87 net153 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI30 net169 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 M0 clkneg net169 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 net169 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net87 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M1 M0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 M1 clkneg net153 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 sceb SCE vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 db sceb p1 vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 db D p0 vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdfrtp_1 CLK D Q RESETB SCD SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I RESETB:I SCD:I SCE:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI642 clkneg CLK vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net84 S0 net114 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net114 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 net107 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 M0 clkpos net95 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 net95 M1 net107 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 S0 clkneg net83 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 Q net84 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net83 net84 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 M1 clkpos S0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI98 db D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 SD=280e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 db SCE n1 vnb nshort W=0.42 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI643 clkneg CLK vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkpos clkneg vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net187 net84 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net84 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 S0 clkpos net187 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net84 S0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI30 net166 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 M0 clkneg net166 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 net166 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 Q net84 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M1 M0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 M1 clkneg S0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 sceb SCE vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 db sceb p1 vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 db D p0 vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdfrtp_2 CLK D Q RESETB SCD SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I RESETB:I SCD:I SCE:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI642 clkneg CLK vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net84 S0 net114 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net114 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 net107 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 M0 clkpos net95 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 net95 M1 net107 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 S0 clkneg net90 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 Q net84 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net90 net84 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 M1 clkpos S0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI98 db D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 SD=280e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 db SCE n1 vnb nshort W=0.42 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI643 clkneg CLK vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkpos clkneg vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net187 net84 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net84 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 S0 clkpos net187 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net84 S0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI30 net166 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 M0 clkneg net166 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 net166 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 Q net84 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M1 M0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 M1 clkneg S0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 sceb SCE vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 db sceb p1 vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 db D p0 vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdfrtp_4 CLK D Q RESETB SCD SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I RESETB:I SCD:I SCE:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI642 clkneg CLK vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net84 S0 net114 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net114 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 net107 RESETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI4 M0 clkpos net95 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 net95 M1 net107 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 S0 clkneg net90 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 Q net84 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net90 net84 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 M1 clkpos S0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI98 db D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 SD=280e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.18 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 db SCE n1 vnb nshort W=0.42 L=0.5 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI643 clkneg CLK vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkpos clkneg vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net187 net84 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net84 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 S0 clkpos net187 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net84 S0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI30 net166 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 M0 clkneg net166 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 net166 RESETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 Q net84 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 M1 M0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 M1 clkneg S0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI633 sceb SCE vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 db sceb p1 vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 db D p0 vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.54 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdfsbp_1 CLK D Q QN SCD SCE SETB vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I SCD:I SCE:I SETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI107 p0 SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 db D p0 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 db sceb p1 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net159 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M0 clkneg net159 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net138 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI669 S0 clkpos net138 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 M1 M0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI661 QN S0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M1 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 sceb SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 net199 S0 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net199 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 S0 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 S1 S0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 S0 clkneg net98 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 net98 M0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI120 db SCE n1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI98 db D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 SD=280e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + topography=normal area=0.525 perim=3.1 |
| mI27 net243 S1 net215 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 S1 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 S0 clkpos net230 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net227 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net199 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 net215 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 QN S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 M0 clkpos net206 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 net199 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 M1 M0 net227 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net206 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI36 net230 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 S0 clkneg net243 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdfsbp_2 CLK D Q QN SCD SCE SETB vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I SCD:I SCE:I SETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI101 db sceb p1 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 db D p0 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 sceb SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 M1 M0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 net195 S0 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net195 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M1 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net130 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M0 clkneg net130 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net122 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI669 S0 clkpos net122 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 S0 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 S1 S0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 S0 clkneg net107 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 net107 M0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI661 QN S0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI98 db D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 SD=280e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 db SCE n1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI34 S0 clkpos net219 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 net239 S1 net187 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 S1 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 M0 clkpos net230 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 M1 M0 net199 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net230 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI36 net219 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 S0 clkneg net239 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net199 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 net195 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 net187 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net195 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 QN S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdfstp_1 CLK D Q SCD SCE SETB vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I SCD:I SCE:I SETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI645 sceb SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 M1 M0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 net165 S0 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net165 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M1 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net109 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M0 clkneg net109 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net96 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI669 S0 clkpos net96 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 S0 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 S1 S0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 S0 clkneg net84 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 net84 M0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 db sceb p1 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 db D p0 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 S0 clkpos net189 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 net209 S1 net157 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 S1 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 M0 clkpos net200 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 M1 M0 net169 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net200 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI36 net189 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 S0 clkneg net209 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net169 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 net165 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 net157 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net165 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI98 db D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 SD=280e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 db SCE n1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| .ENDS |
| .SUBCKT scs8hd_sdfstp_2 CLK D Q SCD SCE SETB vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I SCD:I SCE:I SETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI645 sceb SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 M1 M0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 net165 S0 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net165 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M1 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net109 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M0 clkneg net109 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net96 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI669 S0 clkpos net96 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 S0 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 S1 S0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 S0 clkneg net84 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 net84 M0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 db sceb p1 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 db D p0 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 S0 clkpos net212 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 net209 S1 net157 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 S1 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 M0 clkpos net200 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 M1 M0 net196 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net200 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI36 net212 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 S0 clkneg net209 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net196 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 net165 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 net157 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net165 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI98 db D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 SD=280e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 db SCE n1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| .ENDS |
| .SUBCKT scs8hd_sdfstp_4 CLK D Q SCD SCE SETB vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I SCD:I SCE:I SETB:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI645 sceb SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 M1 M0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI663 net165 S0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 Q net165 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M1 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net104 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M0 clkneg net104 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI6 net96 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI669 S0 clkpos net96 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 S0 SETB vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 S1 S0 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 S0 clkneg net84 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 net84 M0 vpwr vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 db sceb p1 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 db D p0 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 S0 clkpos net189 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 net209 S1 net157 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 S1 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 M0 clkpos net200 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 M1 M0 net169 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net200 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI36 net189 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 S0 clkneg net209 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 db clkneg M0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net169 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 net165 S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 net157 SETB vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 Q net165 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI98 db D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 SD=280e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 db SCE n1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| .ENDS |
| .SUBCKT scs8hd_sdfxbp_1 CLK D Q QN SCD SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I SCD:I SCE:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI98 db D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 SD=280e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 db SCE n1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI657 M0 clkpos net129 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net129 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI641 net120 S1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 S0 clkneg net120 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 Q S1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M1 clkpos S0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI661 QN net153 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net153 S1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 S1 S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 db D p0 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 db sceb p1 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 S1 S0 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 S0 clkpos net177 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M1 M0 vpwr vpb phighvt W=0.75 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net160 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 Q S1 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 QN net153 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 net177 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 M1 clkneg S0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI640 sceb SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M0 clkneg net160 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 net153 S1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdfxbp_2 CLK D Q QN SCD SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I SCD:I SCE:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI98 db D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 SD=280e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 db SCE n1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI657 M0 clkpos net129 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net129 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI641 net120 S1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 S0 clkneg net120 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 Q S1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI652 M1 clkpos S0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI661 QN net153 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI662 net153 S1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 S1 S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 db D p0 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 db sceb p1 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 S1 S0 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 S0 clkpos net196 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M1 M0 vpwr vpb phighvt W=0.75 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net189 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 Q S1 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 QN net153 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 net196 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 M1 clkneg S0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI640 sceb SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M0 clkneg net189 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI647 net153 S1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdfxtp_1 CLK D Q SCD SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I SCD:I SCE:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI652 M1 clkpos S0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 S1 S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 M0 clkpos net78 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net78 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI641 net54 S1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 Q S1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 S0 clkneg net54 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI98 db D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 SD=280e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 db SCE n1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI643 net122 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI640 sceb SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net155 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 Q S1 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 M1 clkneg S0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M0 clkneg net155 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 S1 S0 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 S0 clkpos net122 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M1 M0 vpwr vpb phighvt W=0.75 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 db D p0 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 db sceb p1 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdfxtp_2 CLK D Q SCD SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I SCD:I SCE:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI652 M1 clkpos S0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 S1 S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 M0 clkpos net78 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net78 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI641 net54 S1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 Q S1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 S0 clkneg net54 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI98 db D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 SD=280e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 db SCE n1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI643 net163 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI640 sceb SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net138 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 Q S1 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 M1 clkneg S0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M0 clkneg net138 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 S1 S0 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 S0 clkpos net163 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M1 M0 vpwr vpb phighvt W=0.75 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 db D p0 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 db sceb p1 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdfxtp_4 CLK D Q SCD SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I SCD:I SCE:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI652 M1 clkpos S0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 S1 S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 sceb SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 M0 clkpos net78 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net78 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI641 net54 S1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 Q S1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 S0 clkneg net54 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI98 db D n0 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 SD=280e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + topography=normal area=0.525 perim=3.1 |
| mI103 n1 SCD vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI120 db SCE n1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI104 n0 sceb vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.525 perim=3.1 |
| mI643 net163 S1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI640 sceb SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net155 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 Q S1 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 M1 clkneg S0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M0 clkneg net155 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 S1 S0 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 S0 clkpos net163 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M1 M0 vpwr vpb phighvt W=0.75 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI107 p0 SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI94 db D p0 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI108 p1 SCD vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI101 db sceb p1 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdlclkp_1 CLK GATE GCLK SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I GATE:I SCE:I vgnd:I vnb:I vpb:I vpwr:I GCLK:O |
| mI662 net88 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M0 clkpos net88 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net76 CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net76 m1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI22 net63 SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI21 net116 GATE net63 vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkpos CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 GCLK net76 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 net116 clkneg M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 net116 clkpos M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 m1 M0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 M0 clkneg net123 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net123 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 net116 SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net112 CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net76 m1 net112 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI23 net116 GATE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkpos CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 GCLK net76 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdlclkp_2 CLK GATE GCLK SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I GATE:I SCE:I vgnd:I vnb:I vpb:I vpwr:I GCLK:O |
| mI662 net88 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M0 clkpos net88 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net76 CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net76 m1 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI22 net63 SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI21 net116 GATE net63 vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkpos CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 GCLK net76 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 net116 clkneg M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 net116 clkpos M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 m1 M0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 M0 clkneg net123 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net123 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 net116 SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net112 CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net76 m1 net112 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI23 net116 GATE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkpos CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 GCLK net76 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sdlclkp_4 CLK GATE GCLK SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I GATE:I SCE:I vgnd:I vnb:I vpb:I vpwr:I GCLK:O |
| mI662 net88 m1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI664 M0 clkpos net88 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 net76 CLK vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net76 m1 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 m1 M0 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI22 net63 SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI21 net116 GATE net63 vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 clkneg clkpos vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 clkpos CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI660 GCLK net76 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 net116 clkneg M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 net116 clkpos M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI20 m1 M0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI655 M0 clkneg net123 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI654 net123 m1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 net116 SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 net112 CLK vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net76 m1 net112 vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI23 net116 GATE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 clkneg clkpos vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 clkpos CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI653 GCLK net76 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sedfxbp_1 CLK D DE Q QN SCD SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I DE:I SCD:I SCE:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI14 net155 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI13 S0 clkneg net155 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 Q S0 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net123 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 net127 q1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 M1 M0 vpwr vpb phighvt W=0.75 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 S0 clkpos net127 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M0 clkneg net123 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 q1 S0 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 net116 deneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 net107 sceneg db vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 vpwr SCD net107 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 net104 D net116 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 net104 SCE db vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI40 net87 q1 net104 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI36 deneg DE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 vpwr DE net87 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 sceneg SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI52 QN q1 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI641 net235 q1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 S0 clkneg net235 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 Q S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net224 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 M0 clkpos net224 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 net104 sceneg db vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 q1 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 sceneg SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 net104 D net203 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 net200 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI15 S0 clkpos net200 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI41 net192 q1 net104 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI39 vgnd deneg net192 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 deneg DE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 net203 DE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI49 net176 SCE db vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI48 vgnd SCD net176 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI53 QN q1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sedfxbp_2 CLK D DE Q QN SCD SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I DE:I SCD:I SCE:I vgnd:I vnb:I vpb:I vpwr:I Q:O QN:O |
| mI14 net155 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI13 S0 clkneg net155 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 Q S0 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net144 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 net127 q1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 M1 M0 vpwr vpb phighvt W=0.75 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 S0 clkpos net127 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M0 clkneg net144 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 q1 S0 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 net116 deneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 net107 sceneg db vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 vpwr SCD net107 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 net104 D net116 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 net104 SCE db vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI40 net87 q1 net104 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI36 deneg DE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 vpwr DE net87 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 sceneg SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI52 QN q1 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI641 net240 q1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 S0 clkneg net240 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 Q S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net224 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 M0 clkpos net224 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 net104 sceneg db vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 q1 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 sceneg SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 net104 D net180 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 net200 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI15 S0 clkpos net200 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI41 net192 q1 net104 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI39 vgnd deneg net192 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 deneg DE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 net180 DE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI49 net176 SCE db vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI48 vgnd SCD net176 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI53 QN q1 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sedfxtp_1 CLK D DE Q SCD SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I DE:I SCD:I SCE:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI14 net146 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI13 S0 clkneg net146 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 Q S0 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net114 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 net118 q1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 M1 M0 vpwr vpb phighvt W=0.75 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 S0 clkpos net118 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M0 clkneg net114 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 q1 S0 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 net94 deneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 net103 sceneg db vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 vpwr SCD net103 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 net95 D net94 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 net95 SCE db vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI40 net87 q1 net95 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI36 deneg DE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 vpwr DE net87 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 sceneg SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI641 net222 q1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 S0 clkneg net222 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 Q S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net211 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 M0 clkpos net211 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 net95 sceneg db vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 q1 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 sceneg SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 net95 D net167 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 net187 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI15 S0 clkpos net187 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI41 net179 q1 net95 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI39 vgnd deneg net179 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 deneg DE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 net167 DE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI49 net158 SCE db vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI48 vgnd SCD net158 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sedfxtp_2 CLK D DE Q SCD SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I DE:I SCD:I SCE:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI14 net146 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI13 S0 clkneg net146 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 Q S0 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net114 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 net118 q1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 M1 M0 vpwr vpb phighvt W=0.75 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 S0 clkpos net118 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M0 clkneg net114 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 q1 S0 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 net94 deneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 net98 sceneg db vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 vpwr SCD net98 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 net95 D net94 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 net95 SCE db vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI40 net87 q1 net95 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI36 deneg DE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 vpwr DE net87 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 sceneg SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI641 net222 q1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 S0 clkneg net222 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 Q S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net211 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 M0 clkpos net211 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 net95 sceneg db vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 q1 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 sceneg SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 net95 D net167 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 net187 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI15 S0 clkpos net187 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI41 net174 q1 net95 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI39 vgnd deneg net174 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 deneg DE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 net167 DE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI49 net158 SCE db vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI48 vgnd SCD net158 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_sedfxtp_4 CLK D DE Q SCD SCE vgnd vnb vpb vpwr |
| *.PININFO CLK:I D:I DE:I SCD:I SCE:I vgnd:I vnb:I vpb:I vpwr:I Q:O |
| mI14 net146 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI637 clkpos clkneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI13 S0 clkneg net146 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI651 db clkpos M0 vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI645 Q S0 vpwr vpb phighvt W=1.00 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI658 net135 M1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI638 clkneg CLK vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI643 net118 q1 vpwr vpb phighvt W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI639 M1 M0 vpwr vpb phighvt W=0.75 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI644 S0 clkpos net118 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI659 M0 clkneg net135 vpb phighvt W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 q1 S0 vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 net107 deneg vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 net98 sceneg db vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 vpwr SCD net98 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI31 net95 D net107 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI42 net95 SCE db vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI40 net87 q1 net95 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI36 deneg DE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI38 vpwr DE net87 vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 sceneg SCE vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI634 M1 M0 vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI636 clkpos clkneg vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sb=265e-3 sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI635 clkneg CLK vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI641 net227 q1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI642 S0 clkneg net227 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI648 db clkneg M0 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI646 Q S0 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI656 net206 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI657 M0 clkpos net206 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI43 net95 sceneg db vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI18 q1 S0 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 sceneg SCE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI32 net95 D net190 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 net187 M1 vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI15 S0 clkpos net187 vnb nshort W=0.36 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI41 net174 q1 net95 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI39 vgnd deneg net174 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI37 deneg DE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 net190 DE vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI49 net163 SCE db vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI48 vgnd SCD net163 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_xnor2_2 A B Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMNnand0 vgnd A sndNA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand1 sndNA B inand vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 nmid A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 nmid B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 Y inand nmid vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand0 inand A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand1 inand B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 sndPA B Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 Y inand vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_xnor2_4 A B Y vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I Y:O |
| mMNnand0 vgnd A sndNA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnand1 sndNA B inand vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 nmid A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 nmid B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 Y inand nmid vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand0 inand A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnand1 inand B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 sndPA B Y vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 Y inand vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_xnor3_1 A B C X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN3 X net57 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI29 Ab Bb mid2 vnb nshort W=0.6 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 Abb Bb mid1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 Bb B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 mid1 Cb net57 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 Ab A vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 Cb C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 mid2 C net57 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 Abb Ab vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 Ab B mid1 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI28 Abb B mid2 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 X net57 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 mid1 C net57 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 mid2 B Ab vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 Abb Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI23 mid1 B Abb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 mid2 Bb Abb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 mid2 Cb net57 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 Cb C vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 Bb B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 mid1 Bb Ab vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_xnor3_2 A B C X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN3 X net57 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI29 Ab Bb mid2 vnb nshort W=0.6 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 Abb Bb mid1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 Bb B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 mid1 Cb net57 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 Ab A vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 Cb C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 mid2 C net57 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 Abb Ab vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 Ab B mid1 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI28 Abb B mid2 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 X net57 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 mid1 C net57 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 mid2 B Ab vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 Abb Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI23 mid1 B Abb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 mid2 Bb Abb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 mid2 Cb net57 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 Cb C vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 Bb B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 mid1 Bb Ab vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_xnor3_4 A B C X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIN3 X net57 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI29 Ab Bb mid2 vnb nshort W=0.6 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 Abb Bb mid1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 Bb B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 mid1 Cb net57 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 Ab A vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 Cb C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 mid2 C net57 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 Abb Ab vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 Ab B mid1 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI28 Abb B mid2 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIP3 X net57 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 mid1 C net57 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 mid2 B Ab vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 Abb Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI23 mid1 B Abb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 mid2 Bb Abb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI7 mid2 Cb net57 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 Cb C vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 Bb B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 mid1 Bb Ab vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_xor2_1 A B X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMNnor0 inor A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnor1 inor B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 vgnd A sndNA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 sndNA B X vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 X inor vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor1 sndPA B inor vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 pmid A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 pmid B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 X inor pmid vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_xor2_2 A B X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMNnor0 inor A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnor1 inor B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 vgnd A sndNA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 sndNA B X vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 X inor vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor1 sndPA B inor vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 pmid A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 pmid B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 X inor pmid vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_xor2_4 A B X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMNnor0 inor A vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNnor1 inor B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi10 vgnd A sndNA vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi11 sndNA B X vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMNaoi20 X inor vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor0 vpwr A sndPA vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPnor1 sndPA B inor vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi10 pmid A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi11 pmid B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMPaoi20 X inor pmid vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_xor3_1 A B C X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIP3 X net117 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 mid1 Cb net117 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI1 mid2 C net117 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 Cb C vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 Abb Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 mid1 Bb Ab vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 Bb B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI23 mid1 B Abb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 mid2 Bb Abb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 mid2 B Ab vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 X net117 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 Cb C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 mid1 C net117 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 mid2 Cb net117 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 Ab A vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 Abb Ab vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 Bb B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 Ab B mid1 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 Abb Bb mid1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI28 Abb B mid2 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI29 Ab Bb mid2 vnb nshort W=0.6 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_xor3_2 A B C X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIP3 X net117 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 mid1 Cb net117 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI1 mid2 C net117 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 Cb C vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 Abb Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 mid1 Bb Ab vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 Bb B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI23 mid1 B Abb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 mid2 Bb Abb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 mid2 B Ab vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 X net117 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=2 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 Cb C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 mid1 C net117 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 mid2 Cb net117 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 Ab A vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 Abb Ab vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 Bb B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 Ab B mid1 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 Abb Bb mid1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI28 Abb B mid2 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI29 Ab Bb mid2 vnb nshort W=0.6 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| .SUBCKT scs8hd_xor3_4 A B C X vgnd vnb vpb vpwr |
| *.PININFO A:I B:I C:I vgnd:I vnb:I vpb:I vpwr:I X:O |
| mMIP3 X net117 vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI650 mid1 Cb net117 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI1 mid2 C net117 vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI33 Cb C vpwr vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI45 Ab A vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI47 Abb Ab vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI19 mid1 Bb Ab vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI16 Bb B vpwr vpb phighvt W=1.0 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI23 mid1 B Abb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI26 mid2 Bb Abb vpb phighvt W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI27 mid2 B Ab vpb phighvt W=0.84 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mMIN3 X net117 vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=4 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI34 Cb C vgnd vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI649 mid1 C net117 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI2 mid2 Cb net117 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI44 Ab A vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI46 Abb Ab vgnd vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI17 Bb B vgnd vnb nshort W=0.65 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI24 Ab B mid1 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI25 Abb Bb mid1 vnb nshort W=0.42 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI28 Abb B mid2 vnb nshort W=0.64 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| mI29 Ab Bb mid2 vnb nshort W=0.6 L=0.15 SA=265e-3 SB=265e-3 m=1 |
| *cdl2spi.py: ERROR: unrecognized line: |
| + sd=280e-3 topography=normal area=0.063 perim=1.14 |
| .ENDS |
| |
| |
| ******* EOF |
| |
| ** End of included library /ef/tech/SW/EFS8A/libs.ref/spi/scs8hd/scs8hd.spi |
| |
| .subckt ring_osc2x13 vpwr vgnd clockp[0] clockp[1] reset trim[0] trim[1] |
| + trim[2] trim[3] trim[4] trim[5] trim[6] trim[7] trim[8] trim[9] |
| + trim[10] trim[11] trim[12] trim[13] trim[14] trim[15] trim[16] trim[17] |
| + trim[18] trim[19] trim[20] trim[21] trim[22] trim[23] trim[24] trim[25] |
| + |
| |
| X_1_ _0_[0] clockp[0] vgnd vgnd vpwr vpwr scs8hd_buf_2 |
| X_2_ _0_[1] clockp[1] vgnd vgnd vpwr vpwr scs8hd_buf_2 |
| X\dstage[0].id.delaybuf0 \dstage[0].id.in\ \dstage[0].id.ts\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_2 |
| X\dstage[0].id.delaybuf1 \dstage[0].id.ts\ \dstage[0].id.d0\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_1 |
| X\dstage[0].id.delayen0 \dstage[0].id.d2\ trim[0] \dstage[0].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[0].id.delayen1 \dstage[0].id.d0\ trim[13] \dstage[0].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[0].id.delayenb0 \dstage[0].id.ts\ trim[0] \dstage[0].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_8 |
| X\dstage[0].id.delayenb1 \dstage[0].id.ts\ trim[13] \dstage[0].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_4 |
| X\dstage[0].id.delayint0 \dstage[0].id.d1\ \dstage[0].id.d2\ vgnd vgnd vpwr vpwr scs8hd_clkinv_1 |
| X\dstage[10].id.delaybuf0 \dstage[10].id.in\ \dstage[10].id.ts\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_2 |
| X\dstage[10].id.delaybuf1 \dstage[10].id.ts\ \dstage[10].id.d0\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_1 |
| X\dstage[10].id.delayen0 \dstage[10].id.d2\ trim[10] \dstage[10].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[10].id.delayen1 \dstage[10].id.d0\ trim[23] \dstage[10].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[10].id.delayenb0 \dstage[10].id.ts\ trim[10] \dstage[10].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_8 |
| X\dstage[10].id.delayenb1 \dstage[10].id.ts\ trim[23] \dstage[10].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_4 |
| X\dstage[10].id.delayint0 \dstage[10].id.d1\ \dstage[10].id.d2\ vgnd vgnd vpwr vpwr scs8hd_clkinv_1 |
| X\dstage[11].id.delaybuf0 \dstage[10].id.out\ \dstage[11].id.ts\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_2 |
| X\dstage[11].id.delaybuf1 \dstage[11].id.ts\ \dstage[11].id.d0\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_1 |
| X\dstage[11].id.delayen0 \dstage[11].id.d2\ trim[11] \dstage[11].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[11].id.delayen1 \dstage[11].id.d0\ trim[24] \dstage[11].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[11].id.delayenb0 \dstage[11].id.ts\ trim[11] \dstage[11].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_8 |
| X\dstage[11].id.delayenb1 \dstage[11].id.ts\ trim[24] \dstage[11].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_4 |
| X\dstage[11].id.delayint0 \dstage[11].id.d1\ \dstage[11].id.d2\ vgnd vgnd vpwr vpwr scs8hd_clkinv_1 |
| X\dstage[1].id.delaybuf0 \dstage[0].id.out\ \dstage[1].id.ts\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_2 |
| X\dstage[1].id.delaybuf1 \dstage[1].id.ts\ \dstage[1].id.d0\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_1 |
| X\dstage[1].id.delayen0 \dstage[1].id.d2\ trim[1] \dstage[1].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[1].id.delayen1 \dstage[1].id.d0\ trim[14] \dstage[1].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[1].id.delayenb0 \dstage[1].id.ts\ trim[1] \dstage[1].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_8 |
| X\dstage[1].id.delayenb1 \dstage[1].id.ts\ trim[14] \dstage[1].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_4 |
| X\dstage[1].id.delayint0 \dstage[1].id.d1\ \dstage[1].id.d2\ vgnd vgnd vpwr vpwr scs8hd_clkinv_1 |
| X\dstage[2].id.delaybuf0 \dstage[1].id.out\ \dstage[2].id.ts\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_2 |
| X\dstage[2].id.delaybuf1 \dstage[2].id.ts\ \dstage[2].id.d0\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_1 |
| X\dstage[2].id.delayen0 \dstage[2].id.d2\ trim[2] \dstage[2].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[2].id.delayen1 \dstage[2].id.d0\ trim[15] \dstage[2].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[2].id.delayenb0 \dstage[2].id.ts\ trim[2] \dstage[2].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_8 |
| X\dstage[2].id.delayenb1 \dstage[2].id.ts\ trim[15] \dstage[2].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_4 |
| X\dstage[2].id.delayint0 \dstage[2].id.d1\ \dstage[2].id.d2\ vgnd vgnd vpwr vpwr scs8hd_clkinv_1 |
| X\dstage[3].id.delaybuf0 \dstage[2].id.out\ \dstage[3].id.ts\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_2 |
| X\dstage[3].id.delaybuf1 \dstage[3].id.ts\ \dstage[3].id.d0\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_1 |
| X\dstage[3].id.delayen0 \dstage[3].id.d2\ trim[3] \dstage[3].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[3].id.delayen1 \dstage[3].id.d0\ trim[16] \dstage[3].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[3].id.delayenb0 \dstage[3].id.ts\ trim[3] \dstage[3].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_8 |
| X\dstage[3].id.delayenb1 \dstage[3].id.ts\ trim[16] \dstage[3].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_4 |
| X\dstage[3].id.delayint0 \dstage[3].id.d1\ \dstage[3].id.d2\ vgnd vgnd vpwr vpwr scs8hd_clkinv_1 |
| X\dstage[4].id.delaybuf0 \dstage[3].id.out\ \dstage[4].id.ts\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_2 |
| X\dstage[4].id.delaybuf1 \dstage[4].id.ts\ \dstage[4].id.d0\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_1 |
| X\dstage[4].id.delayen0 \dstage[4].id.d2\ trim[4] \dstage[4].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[4].id.delayen1 \dstage[4].id.d0\ trim[17] \dstage[4].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[4].id.delayenb0 \dstage[4].id.ts\ trim[4] \dstage[4].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_8 |
| X\dstage[4].id.delayenb1 \dstage[4].id.ts\ trim[17] \dstage[4].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_4 |
| X\dstage[4].id.delayint0 \dstage[4].id.d1\ \dstage[4].id.d2\ vgnd vgnd vpwr vpwr scs8hd_clkinv_1 |
| X\dstage[5].id.delaybuf0 \dstage[4].id.out\ \dstage[5].id.ts\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_2 |
| X\dstage[5].id.delaybuf1 \dstage[5].id.ts\ \dstage[5].id.d0\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_1 |
| X\dstage[5].id.delayen0 \dstage[5].id.d2\ trim[5] \dstage[5].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[5].id.delayen1 \dstage[5].id.d0\ trim[18] \dstage[5].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[5].id.delayenb0 \dstage[5].id.ts\ trim[5] \dstage[5].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_8 |
| X\dstage[5].id.delayenb1 \dstage[5].id.ts\ trim[18] \dstage[5].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_4 |
| X\dstage[5].id.delayint0 \dstage[5].id.d1\ \dstage[5].id.d2\ vgnd vgnd vpwr vpwr scs8hd_clkinv_1 |
| X\dstage[6].id.delaybuf0 \dstage[5].id.out\ \dstage[6].id.ts\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_2 |
| X\dstage[6].id.delaybuf1 \dstage[6].id.ts\ \dstage[6].id.d0\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_1 |
| X\dstage[6].id.delayen0 \dstage[6].id.d2\ trim[6] \dstage[6].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[6].id.delayen1 \dstage[6].id.d0\ trim[19] \dstage[6].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[6].id.delayenb0 \dstage[6].id.ts\ trim[6] \dstage[6].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_8 |
| X\dstage[6].id.delayenb1 \dstage[6].id.ts\ trim[19] \dstage[6].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_4 |
| X\dstage[6].id.delayint0 \dstage[6].id.d1\ \dstage[6].id.d2\ vgnd vgnd vpwr vpwr scs8hd_clkinv_1 |
| X\dstage[7].id.delaybuf0 \dstage[6].id.out\ \dstage[7].id.ts\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_2 |
| X\dstage[7].id.delaybuf1 \dstage[7].id.ts\ \dstage[7].id.d0\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_1 |
| X\dstage[7].id.delayen0 \dstage[7].id.d2\ trim[7] \dstage[7].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[7].id.delayen1 \dstage[7].id.d0\ trim[20] \dstage[7].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[7].id.delayenb0 \dstage[7].id.ts\ trim[7] \dstage[7].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_8 |
| X\dstage[7].id.delayenb1 \dstage[7].id.ts\ trim[20] \dstage[7].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_4 |
| X\dstage[7].id.delayint0 \dstage[7].id.d1\ \dstage[7].id.d2\ vgnd vgnd vpwr vpwr scs8hd_clkinv_1 |
| X\dstage[8].id.delaybuf0 \dstage[7].id.out\ \dstage[8].id.ts\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_2 |
| X\dstage[8].id.delaybuf1 \dstage[8].id.ts\ \dstage[8].id.d0\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_1 |
| X\dstage[8].id.delayen0 \dstage[8].id.d2\ trim[8] \dstage[8].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[8].id.delayen1 \dstage[8].id.d0\ trim[21] \dstage[8].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[8].id.delayenb0 \dstage[8].id.ts\ trim[8] \dstage[8].id.out\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_8 |
| X\dstage[8].id.delayenb1 \dstage[8].id.ts\ trim[21] \dstage[8].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_4 |
| X\dstage[8].id.delayint0 \dstage[8].id.d1\ \dstage[8].id.d2\ vgnd vgnd vpwr vpwr scs8hd_clkinv_1 |
| X\dstage[9].id.delaybuf0 \dstage[8].id.out\ \dstage[9].id.ts\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_2 |
| X\dstage[9].id.delaybuf1 \dstage[9].id.ts\ \dstage[9].id.d0\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_1 |
| X\dstage[9].id.delayen0 \dstage[9].id.d2\ trim[9] \dstage[10].id.in\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[9].id.delayen1 \dstage[9].id.d0\ trim[22] \dstage[9].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\dstage[9].id.delayenb0 \dstage[9].id.ts\ trim[9] \dstage[10].id.in\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_8 |
| X\dstage[9].id.delayenb1 \dstage[9].id.ts\ trim[22] \dstage[9].id.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_4 |
| X\dstage[9].id.delayint0 \dstage[9].id.d1\ \dstage[9].id.d2\ vgnd vgnd vpwr vpwr scs8hd_clkinv_1 |
| Xibufp00 \dstage[0].id.in\ c[0] vgnd vgnd vpwr vpwr scs8hd_clkinv_2 |
| Xibufp01 c[0] _0_[0] vgnd vgnd vpwr vpwr scs8hd_clkinv_8 |
| Xibufp10 \dstage[5].id.out\ c[1] vgnd vgnd vpwr vpwr scs8hd_clkinv_2 |
| Xibufp11 c[1] _0_[1] vgnd vgnd vpwr vpwr scs8hd_clkinv_8 |
| X\iss.const1 \iss.one\ _noconnect_1_ vgnd vgnd vpwr vpwr scs8hd_conb_1 |
| X\iss.ctrlen0 reset trim[12] \iss.ctrl0\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_or2_2 |
| X\iss.delaybuf0 \dstage[11].id.out\ \iss.d0\ vgnd vgnd vpwr vpwr scs8hd_clkbuf_1 |
| X\iss.delayen0 \iss.d2\ trim[12] \dstage[0].id.in\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\iss.delayen1 \iss.d0\ trim[25] \iss.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_2 |
| X\iss.delayenb0 \dstage[11].id.out\ \iss.ctrl0\ \dstage[0].id.in\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_8 |
| X\iss.delayenb1 \dstage[11].id.out\ trim[25] \iss.d1\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvn_4 |
| X\iss.delayint0 \iss.d1\ \iss.d2\ vgnd vgnd vpwr vpwr scs8hd_clkinv_1 |
| X\iss.reseten0 \iss.one\ reset \dstage[0].id.in\ vgnd vgnd vpwr |
| + vpwr |
| + scs8hd_einvp_1 |
| Xantenna_0 reset vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[25] trim[25] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[24] trim[24] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[23] trim[23] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[22] trim[22] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[21] trim[21] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[20] trim[20] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[19] trim[19] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[18] trim[18] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[17] trim[17] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[16] trim[16] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[15] trim[15] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[14] trim[14] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[13] trim[13] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[12] trim[12] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[11] trim[11] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[10] trim[10] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[9] trim[9] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[8] trim[8] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[7] trim[7] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[6] trim[6] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[5] trim[5] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[4] trim[4] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[3] trim[3] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[2] trim[2] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[1] trim[1] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| Xantenna_1[0] trim[0] vgnd vgnd vpwr vpwr scs8hd_diode_2 |
| |
| .ends |
| .end |
