| striVe 1000 |
| r_0_lu4.5 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/luRes/_s8_luResRules_ |
| lu4.5: Outer guardring must be connected to external non-regulated power net(s): ("vpwr") |
| r_1_lu4.5 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/luRes/_s8_luResRules_ |
| lu4.5: Outer guardring must be connected to external non-regulated ground net(s): ("vgnd") |
| r_2_luB1.14 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/luRes/_s8_luResRules_ |
| luB1.14: vssNet must connect to at least one B2B diode defined in (Section B1.13) |
| r_3_luB1.14 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/luRes/_s8_luResRules_ |
| luB1.14: Gnd pad connected to "vgnd", not connected to valid B2B diode |
| r_4_subiso.18 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/luRes/_s8_luResRules_ |
| subiso.18: Victim guardring must be connected to a vsub_vic pad. If this is not a full chip run, use the block_level switch. |
| r_5_subiso.18 |
| 0 0 2 ... XX XX:XX:XX 2... |
| Rule File Pathname: /usr/local/google/home/tansell/work/openflow-drc-tests/torture_tests/striVe/luRes/_s8_luResRules_ |
| subiso.18: Aggressor guardring must be connected to a vsub_agr pad. If this is not a full chip run, use the block_level switch. |
| DRC_RDBS |
| 0 0 2 ... XX XX:XX:XX 2... |
| keepLayer.db 0 |
| drcRecommended.db 0 |
