| ////////////////////////////////////////////////////////////////////////////// |
| // SPDX-FileCopyrightText: 2021 , Dinesh Annayya |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // SPDX-License-Identifier: Apache-2.0 |
| // SPDX-FileContributor: Created by Dinesh Annayya <dinesha@opencores.org> |
| // |
| ////////////////////////////////////////////////////////////////////// |
| //// //// |
| //// Digital core //// |
| //// //// |
| //// This file is part of the riscduino-pxt project //// |
| //// https://github.com/dineshannayya/riscduino_pxt1.git //// |
| //// //// |
| //// Description //// |
| //// This is digital core and integrate all the main block //// |
| //// here. //// |
| //// 1. Wishbone Host //// |
| //// 2. 4x MBIST Controller //// |
| //// 3. 4x SRAM 2KB //// |
| //// 4. Wishbone Interconnect //// |
| //// 5. Global Register //// |
| //// 6. GMAC //// |
| //// //// |
| //// To Do: //// |
| //// nothing //// |
| //// //// |
| //// Author(s): //// |
| //// - Dinesh Annayya, dinesh.annayya@gmail.com //// |
| //// //// |
| //// Revision : //// |
| //// 0.1 - 15th Dec 2022, Dinesh A //// |
| //// Initial Version //// |
| //// 0.2 - 25th Dec 2022, Dinesh A //// |
| //// A. MAC core is integrated //// |
| //// B. glbl block moved inside the pinmux //// |
| //// C. All the Pinmux are manged pinmux block //// |
| //// 1.0 - 31th Dec 2022, Dinesh A //// |
| //// A. Bus repeater added //// |
| //// B. Glbl Register added with signature/revison //// |
| ////////////////////////////////////////////////////////////////////// |
| `default_nettype none |
| |
| `include "user_params.svh" |
| |
| module user_project_wrapper ( |
| `ifdef USE_POWER_PINS |
| inout vdda1, // User area 1 3.3V supply |
| inout vdda2, // User area 2 3.3V supply |
| inout vssa1, // User area 1 analog ground |
| inout vssa2, // User area 2 analog ground |
| inout vccd1, // User area 1 1.8V supply |
| inout vccd2, // User area 2 1.8v supply |
| inout vssd1, // User area 1 digital ground |
| inout vssd2, // User area 2 digital ground |
| `endif |
| |
| // Wishbone Slave ports (WB MI A ) |
| input wb_clk_i, |
| input wb_rst_i, |
| input wbs_stb_i, |
| input wbs_cyc_i, |
| input wbs_we_i, |
| input [3:0] wbs_sel_i, |
| input [31:0] wbs_dat_i, |
| input [31:0] wbs_adr_i, |
| output wbs_ack_o, |
| output [31:0] wbs_dat_o, |
| |
| // Logic Analyzer Signals |
| input [127:0] la_data_in, |
| output [127:0] la_data_out, |
| input [127:0] la_oenb, |
| |
| // IOs |
| input [37:0] io_in, |
| output [37:0] io_out, |
| output [37:0] io_oeb, |
| |
| // Analog (direct connection to GPIO pad---use with caution) |
| // Note that analog I/O is not available on the 7 lowest-numbered |
| // GPIO pads, and so the analog_io indexing is offset from the |
| // GPIO indexing by (also upper 2 GPIOs do not havanalog_io ) . |
| inout [28:0] analog_io, |
| |
| // Independent clock (on independent integer divider) |
| input user_clock2, |
| |
| // User maskable interrupt signals |
| output [2:0] user_irq |
| ); |
| |
| parameter BIST_ADDR_WD = 9; // 512x32 SRAM |
| parameter BIST_DATA_WD = 32; |
| parameter WB_WIDTH = 32; // WB ADDRESS/DARA WIDTH |
| parameter BIST_NO_SRAM = 8; |
| |
| parameter SCW = 8; // SCAN CHAIN WIDTH |
| //--------------------------------------------------------------------- |
| // WB HOST <=> WB Interconnect Interface |
| //--------------------------------------------------------------------- |
| wire wbd_int_cyc_i ; // strobe/request |
| wire wbd_int_stb_i ; // strobe/request |
| wire [WB_WIDTH-1:0] wbd_int_adr_i ; // address |
| wire wbd_int_we_i ; // write |
| wire [WB_WIDTH-1:0] wbd_int_dat_i ; // data output |
| wire [3:0] wbd_int_sel_i ; // byte enable |
| wire [WB_WIDTH-1:0] wbd_int_dat_o ; // data input |
| wire wbd_int_ack_o ; // acknowlegement |
| wire wbd_int_err_o ; // error |
| |
| //--------------------------------------------------------------------- |
| // Pinmux Register <==> WB Interconnect Interface |
| //--------------------------------------------------------------------- |
| wire wbd_pinmux_stb_o ; // strobe/request |
| wire [7:0] wbd_pinmux_adr_o ; // address |
| wire wbd_pinmux_we_o ; // write |
| wire [WB_WIDTH-1:0] wbd_pinmux_dat_o ; // data output |
| wire [3:0] wbd_pinmux_sel_o ; // byte enable |
| wire wbd_pinmux_cyc_o ; |
| wire [WB_WIDTH-1:0] wbd_pinmux_dat_i ; // data input |
| wire wbd_pinmux_ack_i ; // acknowlegement |
| wire wbd_pinmux_err_i ; // error |
| |
| //--------------------------------------------------------------------- |
| // MBIST0 <===> WB Interconnect Interface |
| //--------------------------------------------------------------------- |
| wire wbd_mbist0_stb_o ; // strobe/request |
| wire [14:0] wbd_mbist0_adr_o ; // address |
| wire wbd_mbist0_we_o ; // write |
| wire [WB_WIDTH-1:0] wbd_mbist0_dat_o ; // data output |
| wire [3:0] wbd_mbist0_sel_o ; // byte enable |
| wire [9:0] wbd_mbist0_bl_o ; // Burst Length |
| wire wbd_mbist0_bry_o ; // Burst Ready |
| wire wbd_mbist0_cyc_o ; |
| wire [WB_WIDTH-1:0] wbd_mbist0_dat_i ; // data input |
| wire wbd_mbist0_ack_i ; // acknowlegement |
| wire wbd_mbist0_err_i ; // error |
| |
| //--------------------------------------------------------------------- |
| // MBIST1 <===> WB Interconnect Interface |
| //--------------------------------------------------------------------- |
| wire wbd_mbist1_stb_o ; // strobe/request |
| wire [14:0] wbd_mbist1_adr_o ; // address |
| wire wbd_mbist1_we_o ; // write |
| wire [WB_WIDTH-1:0] wbd_mbist1_dat_o ; // data output |
| wire [3:0] wbd_mbist1_sel_o ; // byte enable |
| wire [9:0] wbd_mbist1_bl_o ; // Burst Length |
| wire wbd_mbist1_bry_o ; // Burst Ready |
| wire wbd_mbist1_cyc_o ; |
| wire [WB_WIDTH-1:0] wbd_mbist1_dat_i ; // data input |
| wire wbd_mbist1_ack_i ; // acknowlegement |
| wire wbd_mbist1_err_i ; // error |
| |
| //-------------------------------------------- |
| // GMAC TX WB Master I/F |
| //-------------------------------------------- |
| wire [31:0] wbm_gtx_dat_i ; |
| wire wbm_gtx_ack_i ; |
| wire [31:0] wbm_gtx_dat_o ; |
| wire [15:0] wbm_gtx_adr_o ; |
| wire [3:0] wbm_gtx_sel_o ; |
| wire wbm_gtx_we_o ; |
| wire wbm_gtx_stb_o ; |
| wire wbm_gtx_cyc_o ; |
| |
| //-------------------------------------------- |
| // GMAC RX WB Master I/F |
| //-------------------------------------------- |
| wire [31:0] wbm_grx_dat_i ; |
| wire wbm_grx_ack_i ; |
| wire [31:0] wbm_grx_dat_o ; |
| wire [15:0] wbm_grx_adr_o ; |
| wire [3:0] wbm_grx_sel_o ; |
| wire wbm_grx_we_o ; |
| wire wbm_grx_stb_o ; |
| wire wbm_grx_cyc_o ; |
| |
| //-------------------------------------------- |
| // GMAC REG WB SLAVE I/F |
| //-------------------------------------------- |
| wire [31:0] wbs_grg_dat_o ; |
| wire wbs_grg_ack_o ; |
| wire [31:0] wbs_grg_dat_i ; |
| wire [12:0] wbs_grg_adr_i ; |
| wire [3:0] wbs_grg_sel_i ; |
| wire wbs_grg_we_i ; |
| wire wbs_grg_stb_i ; |
| wire wbs_grg_cyc_i ; |
| |
| |
| //---------------------------------------------------- |
| |
| wire wbd_int_rst_n ; |
| wire bist_rst_n ; |
| wire mac_rst_n ; |
| |
| //----------------------------------------------------- |
| // towards MBIST-0 <==> memory 0/1/2/3/ |
| // towards MBIST-1 <==> memory 4/5/6/7 |
| //------------------------------------------------------ |
| // PORT-A Common Signals |
| wire [BIST_NO_SRAM-1:0] mem_clk_a ; |
| wire [BIST_NO_SRAM-1:0] mem_cen_a ; |
| wire [BIST_NO_SRAM-1:0] mem_web_a ; |
| |
| // MEM0 - PORT-A Signals |
| wire [BIST_ADDR_WD-1:0] mem0_addr_a ; |
| wire [BIST_DATA_WD/8-1:0] mem0_mask_a ; |
| wire [BIST_DATA_WD-1:0] mem0_din_a ; |
| wire [BIST_DATA_WD-1:0] mem0_dout_a ; |
| |
| // MEM1 - PORT-A Signals |
| wire [BIST_ADDR_WD-1:0] mem1_addr_a ; |
| wire [BIST_DATA_WD/8-1:0] mem1_mask_a ; |
| wire [BIST_DATA_WD-1:0] mem1_din_a ; |
| wire [BIST_DATA_WD-1:0] mem1_dout_a ; |
| |
| // MEM2 - PORT-A Signals |
| wire [BIST_ADDR_WD-1:0] mem2_addr_a ; |
| wire [BIST_DATA_WD/8-1:0] mem2_mask_a ; |
| wire [BIST_DATA_WD-1:0] mem2_din_a ; |
| wire [BIST_DATA_WD-1:0] mem2_dout_a ; |
| |
| // MEM3 - PORT-A Signals |
| wire [BIST_ADDR_WD-1:0] mem3_addr_a ; |
| wire [BIST_DATA_WD/8-1:0] mem3_mask_a ; |
| wire [BIST_DATA_WD-1:0] mem3_din_a ; |
| wire [BIST_DATA_WD-1:0] mem3_dout_a ; |
| |
| // MEM4 - PORT-A Signals |
| wire [BIST_ADDR_WD-1:0] mem4_addr_a ; |
| wire [BIST_DATA_WD/8-1:0] mem4_mask_a ; |
| wire [BIST_DATA_WD-1:0] mem4_din_a ; |
| wire [BIST_DATA_WD-1:0] mem4_dout_a ; |
| |
| // MEM5 - PORT-A Signals |
| wire [BIST_ADDR_WD-1:0] mem5_addr_a ; |
| wire [BIST_DATA_WD/8-1:0] mem5_mask_a ; |
| wire [BIST_DATA_WD-1:0] mem5_din_a ; |
| wire [BIST_DATA_WD-1:0] mem5_dout_a ; |
| |
| // MEM6 - PORT-A Signals |
| wire [BIST_ADDR_WD-1:0] mem6_addr_a ; |
| wire [BIST_DATA_WD/8-1:0] mem6_mask_a ; |
| wire [BIST_DATA_WD-1:0] mem6_din_a ; |
| wire [BIST_DATA_WD-1:0] mem6_dout_a ; |
| |
| // MEM7 - PORT-A Signals |
| wire [BIST_ADDR_WD-1:0] mem7_addr_a ; |
| wire [BIST_DATA_WD/8-1:0] mem7_mask_a ; |
| wire [BIST_DATA_WD-1:0] mem7_din_a ; |
| wire [BIST_DATA_WD-1:0] mem7_dout_a ; |
| |
| // PORT-B Signals |
| wire [BIST_NO_SRAM-1:0] mem_clk_b ; |
| wire [BIST_NO_SRAM-1:0] mem_cen_b ; |
| |
| wire [BIST_ADDR_WD-1:0] mem0_addr_b ; |
| wire [BIST_ADDR_WD-1:0] mem1_addr_b ; |
| wire [BIST_ADDR_WD-1:0] mem2_addr_b ; |
| wire [BIST_ADDR_WD-1:0] mem3_addr_b ; |
| wire [BIST_ADDR_WD-1:0] mem4_addr_b ; |
| wire [BIST_ADDR_WD-1:0] mem5_addr_b ; |
| wire [BIST_ADDR_WD-1:0] mem6_addr_b ; |
| wire [BIST_ADDR_WD-1:0] mem7_addr_b ; |
| |
| //---------------------------------------------------- |
| // Clock & clock skew feed through |
| //-------------------------------------------------- |
| wire wbd_clk_pinmux_rp ; |
| wire wbd_clk_mbist0_rp ; |
| wire wbd_clk_mbist1_rp ; |
| wire wbd_clk_mac_rp ; |
| |
| wire wbd_clk_wi_skew ; |
| wire wbd_clk_pinmux_skew ; |
| wire wbd_clk_mbist0_skew ; |
| wire wbd_clk_mbist1_skew ; |
| wire wbd_clk_mac_skew ; |
| |
| wire lbist_clk ; |
| wire wbd_clk_wh ; |
| wire wbd_clk_int ; |
| wire [31:0] cfg_clk_ctrl1 ; |
| wire [31:0] cfg_clk_ctrl2 ; |
| |
| //--------------------------------------------------- |
| // Scan Control Signal |
| //--------------------------------------------------- |
| //////////////////////////////////////////////////////////// |
| // Scan Tree Map |
| /////////////////////////////////////////////////////////// |
| |
| // WB_HOST(LBIST) => MBIST0 => MBIST1 => WB_INTERCONNECT => PINMUX => MAC => WB_HOST(LBIST) |
| wire scan_clk ; // Scan Clock |
| wire scan_rst_n ; // Scan Reset |
| |
| wire scan_mode ; // Scan Mode |
| wire scan_en ; // Scan Enable |
| wire [SCW-1:0] scan_in ; // Scan Chain-In |
| wire [SCW-1:0] scan_out ; // Scan Chain Out |
| |
| wire scan_mode_mbist0 ; |
| wire scan_en_mbist0 ; |
| wire [SCW-1:0] scan_so_mbist0 ; |
| |
| wire scan_mode_mbist1 ; |
| wire scan_en_mbist1 ; |
| wire [SCW-1:0] scan_so_mbist1 ; |
| |
| wire scan_mode_wi ; |
| wire scan_en_wi ; |
| wire [SCW-1:0] scan_so_wi ; |
| |
| wire scan_mode_pinmux ; |
| wire scan_en_pinmux ; |
| wire [SCW-1:0] scan_so_pinmux ; |
| |
| wire scan_mode_mac ; |
| wire scan_en_mac ; |
| wire [SCW-1:0] scan_so_mac ; |
| |
| |
| //----------------------------------------------------------------------- |
| // MAC Line-Tx Signal |
| //----------------------------------------------------------------------- |
| wire mac_tx_en ; |
| wire mac_tx_er ; |
| wire [7:0] mac_txd ; |
| wire mac_tx_clk ; |
| |
| //----------------------------------------------------------------------- |
| // MAC Line-Rx Signal |
| //----------------------------------------------------------------------- |
| wire mac_rx_clk ; |
| wire mac_rx_er ; |
| wire mac_rx_dv ; |
| wire [7:0] mac_rxd ; |
| wire mac_crs ; |
| |
| |
| //----------------------------------------------------------------------- |
| // MAC MDIO Signal |
| //----------------------------------------------------------------------- |
| wire mdio_clk ; |
| wire mdio_in ; |
| wire mdio_out_en ; |
| wire mdio_out ; |
| |
| //-------------------------------------------- |
| // MAC Q Occupancy |
| //-------------------------------------------- |
| wire [9:0] mac_tx_qbase_addr; |
| wire [9:0] mac_rx_qbase_addr; |
| wire mac_tx_qcnt_inc; |
| wire mac_tx_qcnt_dec; |
| wire mac_rx_qcnt_inc; |
| wire mac_rx_qcnt_dec; |
| |
| //--------------------------------------------- |
| // UART Master I/F |
| //--------------------------------------------- |
| wire uartm_rxd; |
| wire uartm_txd; |
| |
| |
| ///////////////////////////////////////////////////////// |
| // Clock Skew Ctrl |
| //////////////////////////////////////////////////////// |
| |
| wire [3:0] cfg_cska_wh = cfg_clk_ctrl1[3:0]; |
| wire [3:0] cfg_cska_wi = cfg_clk_ctrl1[7:4]; |
| wire [3:0] cfg_cska_pinmux = cfg_clk_ctrl1[11:8]; |
| wire [3:0] cfg_cska_lbist = cfg_clk_ctrl1[15:12]; |
| wire [3:0] cfg_cska_mbist0 = cfg_clk_ctrl1[19:16]; |
| wire [3:0] cfg_cska_mbist1 = cfg_clk_ctrl1[23:20]; |
| wire [3:0] cfg_cska_mac = cfg_clk_ctrl1[27:24]; |
| |
| wire cfg_mem_lphase = cfg_clk_ctrl1[31]; // SRAM data lanuch phase selection |
| |
| |
| //---------------------------------------------------------- |
| // Bus Repeater Initiatiation |
| //---------------------------------------------------------- |
| wire [37:0] io_in_rp ; |
| wire [37:0] io_in_rp1 ; |
| wire [37:0] io_in_rp2 ; |
| wire [37:0] io_out_int ; |
| wire [37:0] io_oeb_int ; |
| wire [37:0] io_out_rp1 ; |
| wire [37:0] io_oeb_rp1 ; |
| wire user_clock2_rp ; |
| wire [127:0] la_data_out_int ; |
| |
| `include "bus_repeater.sv" |
| |
| /*********************************************** |
| Wishbone HOST |
| *************************************************/ |
| |
| |
| wb_host |
| #( |
| `ifndef SYNTHESIS |
| .SCW (SCW ) // SCAN CHAIN WIDTH |
| `endif |
| ) |
| u_wb_host( |
| `ifdef USE_POWER_PINS |
| .vccd1 (vccd1 ),// User area 1 1.8V supply |
| .vssd1 (vssd1 ),// User area 1 digital ground |
| `endif |
| .user_clock1 (wb_clk_i ), |
| .user_clock2 (user_clock2 ), |
| .user_irq (user_irq ), |
| |
| // Master Port |
| .wbm_rst_i (wb_rst_i_rp ), |
| .wbm_clk_i (wb_clk_i_rp ), |
| .wbm_cyc_i (wbs_cyc_i_rp ), |
| .wbm_stb_i (wbs_stb_i_rp ), |
| .wbm_adr_i (wbs_adr_i_rp ), |
| .wbm_we_i (wbs_we_i_rp ), |
| .wbm_dat_i (wbs_dat_i_rp ), |
| .wbm_sel_i (wbs_sel_i_rp ), |
| .wbm_dat_o (wbs_dat_int_o ), |
| .wbm_ack_o (wbs_ack_int_o ), |
| .wbm_err_o ( ), |
| |
| // Clock Skeq Adjust |
| .wbd_clk_int (wbd_clk_int ), |
| .wbd_clk_wh (wbd_clk_wh ), |
| .cfg_cska_wh (cfg_cska_wh ), |
| |
| // Clock Skeq Adjust |
| .lbist_clk_int (lbist_clk ), |
| .lbist_clk_out (lbist_clk ), |
| .cfg_cska_lbist (cfg_cska_lbist ), |
| |
| // Slave Port |
| .wbs_clk_out (wbd_clk_int ), |
| .wbs_clk_i (wbd_clk_wh ), |
| .wbs_cyc_o (wbd_int_cyc_i ), |
| .wbs_stb_o (wbd_int_stb_i ), |
| .wbs_adr_o (wbd_int_adr_i ), |
| .wbs_we_o (wbd_int_we_i ), |
| .wbs_dat_o (wbd_int_dat_i ), |
| .wbs_sel_o (wbd_int_sel_i ), |
| .wbs_dat_i (wbd_int_dat_o ), |
| .wbs_ack_i (wbd_int_ack_o ), |
| .wbs_err_i (wbd_int_err_o ), |
| |
| .cfg_clk_ctrl1 (cfg_clk_ctrl1 ), |
| .cfg_clk_ctrl2 (cfg_clk_ctrl2 ), |
| |
| .mac_rst_n (mac_rst_n ), |
| .bist_rst_n (bist_rst_n ), |
| .wbd_int_rst_n (wbd_int_rst_n ), |
| |
| .la_data_in (la_data_in_rp[35:0] ), |
| .la_data_out (la_data_out_int ), |
| |
| .uartm_rxd (uartm_rxd ), |
| .uartm_txd (uartm_txd ), |
| |
| |
| // Scan Control Signal |
| .scan_clk (scan_clk ), |
| .scan_rst_n (scan_rst_n ), |
| .scan_mode (scan_mode ), |
| .scan_en (scan_en ), |
| .scan_in (scan_in ), |
| .scan_out (scan_so_mac ) |
| |
| ); |
| |
| wb_interconnect #( |
| `ifndef SYNTHESIS |
| .SCW (SCW ), // SCAN CHAIN WIDTH |
| .CH_CLK_WD (4 ) |
| `endif |
| ) |
| u_intercon ( |
| `ifdef USE_POWER_PINS |
| .vccd1 (vccd1 ),// User area 1 1.8V supply |
| .vssd1 (vssd1 ),// User area 1 digital ground |
| `endif |
| // Scan I/F |
| .scan_en (scan_en_mbist1 ), |
| .scan_mode (scan_mode_mbist1 ), |
| .scan_si (scan_so_mbist1 ), |
| .scan_so (scan_so_wi ), |
| .scan_en_o (scan_en_wi ), |
| .scan_mode_o (scan_mode_wi ), |
| |
| // Clock Skew adjust |
| .wbd_clk_int (wbd_clk_int ), |
| .cfg_cska_wi (cfg_cska_wi ), |
| .wbd_clk_skew (wbd_clk_wi_skew ), |
| |
| .ch_clk_in ({ wbd_clk_int, |
| wbd_clk_int, |
| wbd_clk_int, |
| wbd_clk_int} ), |
| .ch_clk_out ({ |
| wbd_clk_mac_rp, |
| wbd_clk_mbist1_rp, |
| wbd_clk_mbist0_rp, |
| wbd_clk_pinmux_rp |
| }), |
| |
| .clk_i (wbd_clk_wi_skew ), |
| .rst_n (wbd_int_rst_n ), |
| |
| // Master 0 Interface |
| .m0_wbd_dat_i (wbd_int_dat_i ), |
| .m0_wbd_adr_i (wbd_int_adr_i ), |
| .m0_wbd_sel_i (wbd_int_sel_i ), |
| .m0_wbd_we_i (wbd_int_we_i ), |
| .m0_wbd_cyc_i (wbd_int_cyc_i ), |
| .m0_wbd_stb_i (wbd_int_stb_i ), |
| .m0_wbd_dat_o (wbd_int_dat_o ), |
| .m0_wbd_ack_o (wbd_int_ack_o ), |
| .m0_wbd_err_o (wbd_int_err_o ), |
| |
| // Master 1 Interface |
| .m1_wbd_dat_i (wbm_gtx_dat_o ), |
| .m1_wbd_adr_i (wbm_gtx_adr_o ), |
| .m1_wbd_sel_i (wbm_gtx_sel_o ), |
| .m1_wbd_we_i (wbm_gtx_we_o ), |
| .m1_wbd_cyc_i (wbm_gtx_cyc_o ), |
| .m1_wbd_stb_i (wbm_gtx_stb_o ), |
| .m1_wbd_dat_o (wbm_gtx_dat_i ), |
| .m1_wbd_ack_o (wbm_gtx_ack_i ), |
| .m1_wbd_err_o ( ), |
| |
| // Master 2 Interface |
| .m2_wbd_dat_i (wbm_grx_dat_o ), |
| .m2_wbd_adr_i (wbm_grx_adr_o ), |
| .m2_wbd_sel_i (wbm_grx_sel_o ), |
| .m2_wbd_we_i (wbm_grx_we_o ), |
| .m2_wbd_cyc_i (wbm_grx_cyc_o ), |
| .m2_wbd_stb_i (wbm_grx_stb_o ), |
| .m2_wbd_dat_o (wbm_grx_dat_i ), |
| .m2_wbd_ack_o (wbm_grx_ack_i ), |
| .m2_wbd_err_o ( ), |
| |
| // Slave 0 Interface |
| // .s0_wbd_err_i (1'b0 ), - Moved inside IP |
| .s0_wbd_dat_i (wbd_pinmux_dat_i ), |
| .s0_wbd_ack_i (wbd_pinmux_ack_i ), |
| .s0_wbd_dat_o (wbd_pinmux_dat_o ), |
| .s0_wbd_adr_o (wbd_pinmux_adr_o ), |
| .s0_wbd_sel_o (wbd_pinmux_sel_o ), |
| .s0_wbd_we_o (wbd_pinmux_we_o ), |
| .s0_wbd_cyc_o (wbd_pinmux_cyc_o ), |
| .s0_wbd_stb_o (wbd_pinmux_stb_o ), |
| |
| // Slave 1 Interface |
| //.s1_wbd_err_i (1'b0 ), - Moved inside IP |
| .s1_wbd_dat_i (wbs_grg_dat_o ), |
| .s1_wbd_ack_i (wbs_grg_ack_o ), |
| .s1_wbd_dat_o (wbs_grg_dat_i ), |
| .s1_wbd_adr_o (wbs_grg_adr_i ), |
| .s1_wbd_sel_o (wbs_grg_sel_i ), |
| .s1_wbd_we_o (wbs_grg_we_i ), |
| .s1_wbd_cyc_o (wbs_grg_cyc_i ), |
| .s1_wbd_stb_o (wbs_grg_stb_i ), |
| |
| // Slave 2 Interface |
| //.s2_wbd_err_i (1'b0 ), - Moved inside IP |
| .s2_wbd_dat_i (wbd_mbist0_dat_i ), |
| .s2_wbd_ack_i (wbd_mbist0_ack_i ), |
| .s2_wbd_dat_o (wbd_mbist0_dat_o ), |
| .s2_wbd_adr_o (wbd_mbist0_adr_o ), |
| .s2_wbd_sel_o (wbd_mbist0_sel_o ), |
| .s2_wbd_bl_o (wbd_mbist0_bl_o ), |
| .s2_wbd_bry_o (wbd_mbist0_bry_o ), |
| .s2_wbd_we_o (wbd_mbist0_we_o ), |
| .s2_wbd_cyc_o (wbd_mbist0_cyc_o ), |
| .s2_wbd_stb_o (wbd_mbist0_stb_o ), |
| |
| // Slave 3 Interface |
| //.s3_wbd_err_i (1'b0 ), - Moved inside IP |
| .s3_wbd_dat_i (wbd_mbist1_dat_i ), |
| .s3_wbd_ack_i (wbd_mbist1_ack_i ), |
| .s3_wbd_dat_o (wbd_mbist1_dat_o ), |
| .s3_wbd_adr_o (wbd_mbist1_adr_o ), |
| .s3_wbd_sel_o (wbd_mbist1_sel_o ), |
| .s3_wbd_bl_o (wbd_mbist1_bl_o ), |
| .s3_wbd_bry_o (wbd_mbist1_bry_o ), |
| .s3_wbd_we_o (wbd_mbist1_we_o ), |
| .s3_wbd_cyc_o (wbd_mbist1_cyc_o ), |
| .s3_wbd_stb_o (wbd_mbist1_stb_o ), |
| |
| // Q Occupancy |
| .mac_tx_qbase_addr (mac_tx_qbase_addr ) , |
| .mac_rx_qbase_addr (mac_rx_qbase_addr ) , |
| |
| .mac_tx_qcnt_inc (mac_tx_qcnt_inc ), |
| .mac_tx_qcnt_dec (mac_tx_qcnt_dec ), |
| .mac_rx_qcnt_inc (mac_rx_qcnt_inc ), |
| .mac_rx_qcnt_dec (mac_rx_qcnt_dec ) |
| ); |
| |
| |
| pinmux_top #( |
| `ifndef SYNTHESIS |
| .SCW (SCW ) // SCAN CHAIN WIDTH |
| `endif |
| ) u_pinmux( |
| `ifdef USE_POWER_PINS |
| .vccd1 (vccd1 ),// User area 1 1.8V supply |
| .vssd1 (vssd1 ),// User area 1 digital ground |
| `endif |
| // Scan I/F |
| .scan_en (scan_en_wi ), |
| .scan_mode (scan_mode_wi ), |
| .scan_si (scan_so_wi ), |
| .scan_so (scan_so_pinmux ), |
| .scan_en_o (scan_en_pinmux ), |
| .scan_mode_o (scan_mode_pinmux ), |
| |
| |
| .wbd_clk_int (wbd_clk_pinmux_rp ), |
| .cfg_cska_pinmux (cfg_cska_pinmux ), |
| .wbd_clk_skew (wbd_clk_pinmux_skew ), |
| |
| .mclk (wbd_clk_pinmux_skew ), |
| .reset_n (wbd_int_rst_n ), |
| |
| // Reg Bus Interface Signal |
| .reg_cs (wbd_pinmux_stb_o ), |
| .reg_wr (wbd_pinmux_we_o ), |
| .reg_addr (wbd_pinmux_adr_o ), |
| .reg_wdata (wbd_pinmux_dat_o ), |
| .reg_be (wbd_pinmux_sel_o ), |
| |
| // Outputs |
| .reg_rdata (wbd_pinmux_dat_i ), |
| .reg_ack (wbd_pinmux_ack_i ), |
| |
| |
| //----------------------------------------------------------------------- |
| // MAC Line-Tx Signal |
| //----------------------------------------------------------------------- |
| .mac_tx_en (mac_tx_en ), |
| .mac_tx_er (mac_tx_er ), |
| .mac_txd (mac_txd ), |
| .mac_tx_clk (mac_tx_clk ), |
| |
| //----------------------------------------------------------------------- |
| // MAC Line-Rx Signal |
| //----------------------------------------------------------------------- |
| .mac_rx_clk (mac_rx_clk ), |
| .mac_rx_er (mac_rx_er ), |
| .mac_rx_dv (mac_rx_dv ), |
| .mac_rxd (mac_rxd ), |
| .mac_crs (mac_crs ), |
| |
| |
| //----------------------------------------------------------------------- |
| // MAC MDIO Signal |
| //----------------------------------------------------------------------- |
| .mdio_clk (mdio_clk ), |
| .mdio_in (mdio_in ), |
| .mdio_out_en (mdio_out_en ), |
| .mdio_out (mdio_out ), |
| |
| //------------------------------------- |
| // Master UART TXD |
| //------------------------------------- |
| .uartm_rxd (uartm_rxd ), |
| .uartm_txd (uartm_txd ), |
| |
| //------------------------------------- |
| // Caravel IO I/F |
| //------------------------------------- |
| .io_in (io_in_rp ), |
| .io_out (io_out_int ), |
| .io_oeb (io_oeb_int ) |
| |
| |
| ); |
| |
| //------------- MBIST-0 - 512x32 * 4 ---- |
| |
| |
| mbist_wrapper #( |
| `ifndef SYNTHESIS |
| .SCW (SCW ), |
| .BIST_NO_SRAM (4 ), |
| .BIST_ADDR_WD (BIST_ADDR_WD ), |
| .BIST_DATA_WD (BIST_DATA_WD ), |
| .BIST_ADDR_START (9'h000 ), |
| .BIST_ADDR_END (9'h1FB ), |
| .BIST_REPAIR_ADDR_START(9'h1FC ), |
| .BIST_RAD_WD_I (BIST_ADDR_WD ), |
| .BIST_RAD_WD_O (BIST_ADDR_WD ) |
| `endif |
| ) |
| u_mbist0 ( |
| `ifdef USE_POWER_PINS |
| .vccd1 (vccd1 ),// User area 1 1.8V supply |
| .vssd1 (vssd1 ),// User area 1 digital ground |
| `endif |
| // Clock Skew adjust |
| .wbd_clk_int (wbd_clk_mbist0_rp ), |
| .cfg_cska_mbist (cfg_cska_mbist0 ), |
| .wbd_clk_skew (wbd_clk_mbist0_skew ), |
| |
| |
| .scan_en (scan_en ), |
| .scan_mode (scan_mode ), |
| .scan_si (scan_in ), |
| .scan_so (scan_so_mbist0 ), |
| .scan_en_o (scan_en_mbist0 ), |
| .scan_mode_o (scan_mode_mbist0 ), |
| |
| |
| // WB I/F |
| .wb_clk2_i (wbd_clk_mbist0_skew ), |
| .wb_clk_i (wbd_clk_mbist0_skew ), |
| .wb_cyc_i (wbd_mbist0_cyc_o ), |
| .wb_stb_i (wbd_mbist0_stb_o ), |
| .wb_adr_i (wbd_mbist0_adr_o ), |
| .wb_we_i (wbd_mbist0_we_o ), |
| .wb_dat_i (wbd_mbist0_dat_o ), |
| .wb_sel_i (wbd_mbist0_sel_o ), |
| .wb_bl_i (wbd_mbist0_bl_o ), |
| .wb_bry_i (wbd_mbist0_bry_o ), |
| .wb_dat_o (wbd_mbist0_dat_i ), |
| .wb_ack_o (wbd_mbist0_ack_i ), |
| .wb_err_o ( ), |
| .rst_n (bist_rst_n ), |
| |
| |
| // towards memory |
| // PORT-A |
| .mem_clk_a (mem_clk_a[3:0] ), |
| .mem_cen_a (mem_cen_a[3:0] ), |
| .mem_web_a (mem_web_a[3:0] ), |
| |
| .mem_addr_a0 (mem0_addr_a ), |
| .mem_mask_a0 (mem0_mask_a ), |
| .mem_din_a0 (mem0_din_a ), |
| .mem_dout_a0 (mem0_dout_a ), |
| |
| .mem_addr_a1 (mem1_addr_a ), |
| .mem_mask_a1 (mem1_mask_a ), |
| .mem_din_a1 (mem1_din_a ), |
| .mem_dout_a1 (mem1_dout_a ), |
| |
| .mem_addr_a2 (mem2_addr_a ), |
| .mem_mask_a2 (mem2_mask_a ), |
| .mem_din_a2 (mem2_din_a ), |
| .mem_dout_a2 (mem2_dout_a ), |
| |
| .mem_addr_a3 (mem3_addr_a ), |
| .mem_mask_a3 (mem3_mask_a ), |
| .mem_din_a3 (mem3_din_a ), |
| .mem_dout_a3 (mem3_dout_a ), |
| |
| // PORT-B |
| .mem_clk_b (mem_clk_b[3:0] ), |
| .mem_cen_b (mem_cen_b[3:0] ), |
| |
| .mem_addr_b0 (mem0_addr_b ), |
| .mem_addr_b1 (mem1_addr_b ), |
| .mem_addr_b2 (mem2_addr_b ), |
| .mem_addr_b3 (mem3_addr_b ) |
| ); |
| |
| |
| //---------------------------- |
| // SRAM 2KB BANK=0 |
| //--------------------- |
| sky130_sram_2kbyte_1rw1r_32x512_8 u_sram0_2kb( |
| `ifdef USE_POWER_PINS |
| .vccd1 (vccd1 ),// User area 1 1.8V supply |
| .vssd1 (vssd1 ),// User area 1 digital ground |
| `endif |
| // Port 0: RW |
| .clk0 (mem_clk_a[0] ), |
| .csb0 (mem_cen_a[0] ), |
| .web0 (mem_web_a[0] ), |
| .wmask0 (mem0_mask_a ), |
| .addr0 (mem0_addr_a ), |
| .din0 (mem0_din_a ), |
| .dout0 (mem0_dout_a ), |
| // Port 1: R |
| .clk1 (mem_clk_b[0] ), |
| .csb1 (mem_cen_b[0] ), |
| .addr1 (mem0_addr_b ), |
| .dout1 ( ) |
| ); |
| //---------------------------- |
| // SRAM 2KB BANK=1 |
| //--------------------- |
| sky130_sram_2kbyte_1rw1r_32x512_8 u_sram1_2kb( |
| `ifdef USE_POWER_PINS |
| .vccd1 (vccd1 ),// User area 1 1.8V supply |
| .vssd1 (vssd1 ),// User area 1 digital ground |
| `endif |
| // Port 0: RW |
| .clk0 (mem_clk_a[1] ), |
| .csb0 (mem_cen_a[1] ), |
| .web0 (mem_web_a[1] ), |
| .wmask0 (mem1_mask_a ), |
| .addr0 (mem1_addr_a ), |
| .din0 (mem1_din_a ), |
| .dout0 (mem1_dout_a ), |
| // Port 1: R |
| .clk1 (mem_clk_b[1] ), |
| .csb1 (mem_cen_b[1] ), |
| .addr1 (mem1_addr_b ), |
| .dout1 ( ) |
| ); |
| //---------------------------- |
| // SRAM 2KB BANK=2 |
| //--------------------- |
| sky130_sram_2kbyte_1rw1r_32x512_8 u_sram2_2kb( |
| `ifdef USE_POWER_PINS |
| .vccd1 (vccd1 ),// User area 1 1.8V supply |
| .vssd1 (vssd1 ),// User area 1 digital ground |
| `endif |
| // Port 0: RW |
| .clk0 (mem_clk_a[2] ), |
| .csb0 (mem_cen_a[2] ), |
| .web0 (mem_web_a[2] ), |
| .wmask0 (mem2_mask_a ), |
| .addr0 (mem2_addr_a ), |
| .din0 (mem2_din_a ), |
| .dout0 (mem2_dout_a ), |
| // Port 1: R |
| .clk1 (mem_clk_b[2] ), |
| .csb1 (mem_cen_b[2] ), |
| .addr1 (mem2_addr_b ), |
| .dout1 ( ) |
| ); |
| //---------------------------- |
| // SRAM 2KB BANK=3 |
| //--------------------- |
| sky130_sram_2kbyte_1rw1r_32x512_8 u_sram3_2kb( |
| `ifdef USE_POWER_PINS |
| .vccd1 (vccd1 ),// User area 1 1.8V supply |
| .vssd1 (vssd1 ),// User area 1 digital ground |
| `endif |
| // Port 0: RW |
| .clk0 (mem_clk_a[3] ), |
| .csb0 (mem_cen_a[3] ), |
| .web0 (mem_web_a[3] ), |
| .wmask0 (mem3_mask_a ), |
| .addr0 (mem3_addr_a ), |
| .din0 (mem3_din_a ), |
| .dout0 (mem3_dout_a ), |
| // Port 1: R |
| .clk1 (mem_clk_b[3] ), |
| .csb1 (mem_cen_b[3] ), |
| .addr1 (mem3_addr_b ), |
| .dout1 ( ) |
| ); |
| |
| //------------- MBIST-1 - 512x32 * 4 ---- |
| |
| |
| mbist_wrapper #( |
| `ifndef SYNTHESIS |
| .SCW (SCW ), |
| .BIST_NO_SRAM (4 ), |
| .BIST_ADDR_WD (BIST_ADDR_WD ), |
| .BIST_DATA_WD (BIST_DATA_WD ), |
| .BIST_ADDR_START (9'h000 ), |
| .BIST_ADDR_END (9'h1FB ), |
| .BIST_REPAIR_ADDR_START(9'h1FC ), |
| .BIST_RAD_WD_I (BIST_ADDR_WD ), |
| .BIST_RAD_WD_O (BIST_ADDR_WD ) |
| `endif |
| ) |
| u_mbist1 ( |
| `ifdef USE_POWER_PINS |
| .vccd1 (vccd1 ),// User area 1 1.8V supply |
| .vssd1 (vssd1 ),// User area 1 digital ground |
| `endif |
| // Clock Skew adjust |
| .wbd_clk_int (wbd_clk_mbist1_rp ), |
| .cfg_cska_mbist (cfg_cska_mbist1 ), |
| .wbd_clk_skew (wbd_clk_mbist1_skew ), |
| |
| // Scan I/F |
| .scan_en (scan_en_mbist0 ), |
| .scan_mode (scan_mode_mbist0 ), |
| .scan_si (scan_so_mbist0 ), |
| .scan_so (scan_so_mbist1 ), |
| .scan_en_o (scan_en_mbist1 ), |
| .scan_mode_o (scan_mode_mbist1 ), |
| |
| // WB I/F |
| .wb_clk2_i (wbd_clk_mbist1_skew ), |
| .wb_clk_i (wbd_clk_mbist1_skew ), |
| .wb_cyc_i (wbd_mbist1_cyc_o ), |
| .wb_stb_i (wbd_mbist1_stb_o ), |
| .wb_adr_i (wbd_mbist1_adr_o ), |
| .wb_we_i (wbd_mbist1_we_o ), |
| .wb_dat_i (wbd_mbist1_dat_o ), |
| .wb_sel_i (wbd_mbist1_sel_o ), |
| .wb_bl_i (wbd_mbist1_bl_o ), |
| .wb_bry_i (wbd_mbist1_bry_o ), |
| .wb_dat_o (wbd_mbist1_dat_i ), |
| .wb_ack_o (wbd_mbist1_ack_i ), |
| .wb_err_o ( ), |
| .rst_n (bist_rst_n ), |
| |
| |
| // towards memory |
| // PORT-A |
| .mem_clk_a (mem_clk_a[7:4] ), |
| .mem_cen_a (mem_cen_a[7:4] ), |
| .mem_web_a (mem_web_a[7:4] ), |
| |
| .mem_addr_a0 (mem4_addr_a ), |
| .mem_mask_a0 (mem4_mask_a ), |
| .mem_din_a0 (mem4_din_a ), |
| .mem_dout_a0 (mem4_dout_a ), |
| |
| .mem_addr_a1 (mem5_addr_a ), |
| .mem_mask_a1 (mem5_mask_a ), |
| .mem_din_a1 (mem5_din_a ), |
| .mem_dout_a1 (mem5_dout_a ), |
| |
| .mem_addr_a2 (mem6_addr_a ), |
| .mem_mask_a2 (mem6_mask_a ), |
| .mem_din_a2 (mem6_din_a ), |
| .mem_dout_a2 (mem6_dout_a ), |
| |
| .mem_addr_a3 (mem7_addr_a ), |
| .mem_mask_a3 (mem7_mask_a ), |
| .mem_din_a3 (mem7_din_a ), |
| .mem_dout_a3 (mem7_dout_a ), |
| |
| // PORT-B |
| .mem_clk_b (mem_clk_b[7:4] ), |
| .mem_cen_b (mem_cen_b[7:4] ), |
| |
| .mem_addr_b0 (mem4_addr_b ), |
| .mem_addr_b1 (mem5_addr_b ), |
| .mem_addr_b2 (mem6_addr_b ), |
| .mem_addr_b3 (mem7_addr_b ) |
| ); |
| |
| |
| //---------------------------- |
| // SRAM 2KB BANK=4 |
| //--------------------- |
| sky130_sram_2kbyte_1rw1r_32x512_8 u_sram4_2kb( |
| `ifdef USE_POWER_PINS |
| .vccd1 (vccd1 ),// User area 1 1.8V supply |
| .vssd1 (vssd1 ),// User area 1 digital ground |
| `endif |
| // Port 0: RW |
| .clk0 (mem_clk_a[4] ), |
| .csb0 (mem_cen_a[4] ), |
| .web0 (mem_web_a[4] ), |
| .wmask0 (mem4_mask_a ), |
| .addr0 (mem4_addr_a ), |
| .din0 (mem4_din_a ), |
| .dout0 (mem4_dout_a ), |
| // Port 1: R |
| .clk1 (mem_clk_b[4] ), |
| .csb1 (mem_cen_b[4] ), |
| .addr1 (mem4_addr_b ), |
| .dout1 ( ) |
| ); |
| //---------------------------- |
| // SRAM 2KB BANK=5 |
| //--------------------- |
| sky130_sram_2kbyte_1rw1r_32x512_8 u_sram5_2kb( |
| `ifdef USE_POWER_PINS |
| .vccd1 (vccd1 ),// User area 1 1.8V supply |
| .vssd1 (vssd1 ),// User area 1 digital ground |
| `endif |
| // Port 0: RW |
| .clk0 (mem_clk_a[5] ), |
| .csb0 (mem_cen_a[5] ), |
| .web0 (mem_web_a[5] ), |
| .wmask0 (mem5_mask_a ), |
| .addr0 (mem5_addr_a ), |
| .din0 (mem5_din_a ), |
| .dout0 (mem5_dout_a ), |
| // Port 1: R |
| .clk1 (mem_clk_b[5] ), |
| .csb1 (mem_cen_b[5] ), |
| .addr1 (mem5_addr_b ), |
| .dout1 ( ) |
| ); |
| //---------------------------- |
| // SRAM 2KB BANK=6 |
| //--------------------- |
| sky130_sram_2kbyte_1rw1r_32x512_8 u_sram6_2kb( |
| `ifdef USE_POWER_PINS |
| .vccd1 (vccd1 ),// User area 1 1.8V supply |
| .vssd1 (vssd1 ),// User area 1 digital ground |
| `endif |
| // Port 0: RW |
| .clk0 (mem_clk_a[6] ), |
| .csb0 (mem_cen_a[6] ), |
| .web0 (mem_web_a[6] ), |
| .wmask0 (mem6_mask_a ), |
| .addr0 (mem6_addr_a ), |
| .din0 (mem6_din_a ), |
| .dout0 (mem6_dout_a ), |
| // Port 1: R |
| .clk1 (mem_clk_b[6] ), |
| .csb1 (mem_cen_b[6] ), |
| .addr1 (mem6_addr_b ), |
| .dout1 ( ) |
| ); |
| //---------------------------- |
| // SRAM 2KB BANK=3 |
| //--------------------- |
| sky130_sram_2kbyte_1rw1r_32x512_8 u_sram7_2kb( |
| `ifdef USE_POWER_PINS |
| .vccd1 (vccd1 ),// User area 1 1.8V supply |
| .vssd1 (vssd1 ),// User area 1 digital ground |
| `endif |
| // Port 0: RW |
| .clk0 (mem_clk_a[7] ), |
| .csb0 (mem_cen_a[7] ), |
| .web0 (mem_web_a[7] ), |
| .wmask0 (mem7_mask_a ), |
| .addr0 (mem7_addr_a ), |
| .din0 (mem7_din_a ), |
| .dout0 (mem7_dout_a ), |
| // Port 1: R |
| .clk1 (mem_clk_b[7] ), |
| .csb1 (mem_cen_b[7] ), |
| .addr1 (mem7_addr_b ), |
| .dout1 ( ) |
| ); |
| |
| |
| //------------------------------------------------ |
| // MAC WRAPPER |
| //------------------------------------------------ |
| |
| mac_wrapper u_mac_wrap( |
| |
| .app_clk (wbd_clk_mac_skew ), |
| .reset_n (mac_rst_n ), |
| |
| // Clock Skeq Adjust |
| .wbd_clk_int (wbd_clk_mac_rp ), |
| .wbd_clk_skew (wbd_clk_mac_skew ), |
| .cfg_cska_mac (cfg_cska_mac ), |
| |
| // Scan I/F |
| .scan_en (scan_en_pinmux ), |
| .scan_mode (scan_mode_pinmux ), |
| .scan_si (scan_so_pinmux ), |
| .scan_so (scan_so_mac ), |
| .scan_en_o (scan_en_mac ), |
| .scan_mode_o (scan_mode_mac ), |
| |
| //----------------------------------------------------------------------- |
| // MAC Line-Tx Signal |
| //----------------------------------------------------------------------- |
| .phy_tx_en (mac_tx_en ), |
| .phy_tx_er (mac_tx_er ), |
| .phy_txd (mac_txd ), |
| .phy_tx_clk (mac_tx_clk ), |
| |
| //----------------------------------------------------------------------- |
| // MAC Line-Rx Signal |
| //----------------------------------------------------------------------- |
| .phy_rx_clk (mac_rx_clk ), |
| .phy_rx_er (mac_rx_er ), |
| .phy_rx_dv (mac_rx_dv ), |
| .phy_rxd (mac_rxd ), |
| .phy_crs (mac_crs ), |
| |
| |
| //----------------------------------------------------------------------- |
| // MAC MDIO Signal |
| //----------------------------------------------------------------------- |
| .mdio_clk (mdio_clk ), |
| .mdio_in (mdio_in ), |
| .mdio_out_en (mdio_out_en ), |
| .mdio_out (mdio_out ), |
| |
| //-------------------------------------------- |
| // GMAC TX WB Master I/F |
| //-------------------------------------------- |
| .wbm_gtx_dat_i (wbm_gtx_dat_i ), |
| .wbm_gtx_ack_i (wbm_gtx_ack_i ), |
| .wbm_gtx_dat_o (wbm_gtx_dat_o ), |
| .wbm_gtx_adr_o (wbm_gtx_adr_o ), |
| .wbm_gtx_sel_o (wbm_gtx_sel_o ), |
| .wbm_gtx_we_o (wbm_gtx_we_o ), |
| .wbm_gtx_stb_o (wbm_gtx_stb_o ), |
| .wbm_gtx_cyc_o (wbm_gtx_cyc_o ), |
| |
| //-------------------------------------------- |
| // GMAC RX WB Master I/F |
| //-------------------------------------------- |
| .wbm_grx_dat_i (wbm_grx_dat_i ), |
| .wbm_grx_ack_i (wbm_grx_ack_i ), |
| .wbm_grx_dat_o (wbm_grx_dat_o ), |
| .wbm_grx_adr_o (wbm_grx_adr_o ), |
| .wbm_grx_sel_o (wbm_grx_sel_o ), |
| .wbm_grx_we_o (wbm_grx_we_o ), |
| .wbm_grx_stb_o (wbm_grx_stb_o ), |
| .wbm_grx_cyc_o (wbm_grx_cyc_o ), |
| |
| //-------------------------------------------- |
| // GMAC REG WB SLAVE I/F |
| //-------------------------------------------- |
| .wbs_grg_dat_o (wbs_grg_dat_o ), |
| .wbs_grg_ack_o (wbs_grg_ack_o ), |
| .wbs_grg_dat_i (wbs_grg_dat_i ), |
| .wbs_grg_adr_i (wbs_grg_adr_i ), |
| .wbs_grg_sel_i (wbs_grg_sel_i ), |
| .wbs_grg_we_i (wbs_grg_we_i ), |
| .wbs_grg_stb_i (wbs_grg_stb_i ), |
| .wbs_grg_cyc_i (wbs_grg_cyc_i ), |
| |
| // Q Occupancy |
| .cfg_tx_qbase_addr (mac_tx_qbase_addr ), |
| .cfg_rx_qbase_addr (mac_rx_qbase_addr ), |
| |
| .mac_tx_qcnt_inc (mac_tx_qcnt_inc ), |
| .mac_tx_qcnt_dec (mac_tx_qcnt_dec ), |
| .mac_rx_qcnt_inc (mac_rx_qcnt_inc ), |
| .mac_rx_qcnt_dec (mac_rx_qcnt_dec ) |
| |
| ); |
| |
| |
| |
| endmodule // user_project_wrapper |
| |
| `default_nettype wire |
